aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-08-07hwmon: (nct7802) Fix wrong detection of in4 presenceGuenter Roeck1-3/+3
The code to detect if in4 is present is wrong; if in4 is not present, the in4_input sysfs attribute is still present. In detail: - Ihen RTD3_MD=11 (VSEN3 present), everything is as expected (no bug). - If we have RTD3_MD!=11 (no VSEN3), we unexpectedly have a in4_input file under /sys and the "sensors" command displays in4_input. But as expected, we have no in4_min, in4_max, in4_alarm, in4_beep. Fix is_visible function to detect and report in4_input visibility as expected. Reported-by: Gilles Buloz <[email protected]> Cc: Gilles Buloz <[email protected]> Cc: [email protected] Fixes: 3434f37835804 ("hwmon: Driver for Nuvoton NCT7802Y") Signed-off-by: Guenter Roeck <[email protected]>
2019-08-07IB/mlx5: Check the correct variable in error handling codeDan Carpenter1-1/+1
The code accidentally checks "event_sub" instead of "event_sub->eventfd". Fixes: 759738537142 ("IB/mlx5: Enable subscription for device events over DEVX") Signed-off-by: Dan Carpenter <[email protected]> Reviewed-by: Jason Gunthorpe <[email protected]> Acked-by: Leon Romanovsky <[email protected]> Link: https://lore.kernel.org/r/20190807123236.GA11452@mwanda Signed-off-by: Doug Ledford <[email protected]>
2019-08-07RDMA/counter: Prevent QP counter binding if counters unsupportedMark Zhang1-0/+6
In case of rdma_counter_init() fails, counter allocation and QP bind should not be allowed. Fixes: 413d3347503b ("RDMA/counter: Add set/clear per-port auto mode support") Fixes: 1bd8e0a9d0fd ("RDMA/counter: Allow manual mode configuration support") Signed-off-by: Mark Zhang <[email protected]> Reviewed-by: Parav Pandit <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Doug Ledford <[email protected]>
2019-08-07IB/mlx5: Fix implicit MR release flowYishai Hadas2-19/+9
Once implicit MR is being called to be released by ib_umem_notifier_release() its leaves were marked as "dying". However, when dereg_mr()->mlx5_ib_free_implicit_mr()->mr_leaf_free() is called, it skips running the mr_leaf_free_action (i.e. umem_odp->work) when those leaves were marked as "dying". As such ib_umem_release() for the leaves won't be called and their MRs will be leaked as well. When an application exits/killed without calling dereg_mr we might hit the above flow. This fatal scenario is reported by WARN_ON() upon mlx5_ib_dealloc_ucontext() as ibcontext->per_mm_list is not empty, the call trace can be seen below. Originally the "dying" mark as part of ib_umem_notifier_release() was introduced to prevent pagefault_mr() from returning a success response once this happened. However, we already have today the completion mechanism so no need for that in those flows any more. Even in case a success response will be returned the firmware will not find the pages and an error will be returned in the following call as a released mm will cause ib_umem_odp_map_dma_pages() to permanently fail mmget_not_zero(). Fix the above issue by dropping the "dying" from the above flows. The other flows that are using "dying" are still needed it for their synchronization purposes. WARNING: CPU: 1 PID: 7218 at drivers/infiniband/hw/mlx5/main.c:2004 mlx5_ib_dealloc_ucontext+0x84/0x90 [mlx5_ib] CPU: 1 PID: 7218 Comm: ibv_rc_pingpong Tainted: G E 5.2.0-rc6+ #13 Call Trace: uverbs_destroy_ufile_hw+0xb5/0x120 [ib_uverbs] ib_uverbs_close+0x1f/0x80 [ib_uverbs] __fput+0xbe/0x250 task_work_run+0x88/0xa0 do_exit+0x2cb/0xc30 ? __fput+0x14b/0x250 do_group_exit+0x39/0xb0 get_signal+0x191/0x920 ? _raw_spin_unlock_bh+0xa/0x20 ? inet_csk_accept+0x229/0x2f0 do_signal+0x36/0x5e0 ? put_unused_fd+0x5b/0x70 ? __sys_accept4+0x1a6/0x1e0 ? inet_hash+0x35/0x40 ? release_sock+0x43/0x90 ? _raw_spin_unlock_bh+0xa/0x20 ? inet_listen+0x9f/0x120 exit_to_usermode_loop+0x5c/0xc6 do_syscall_64+0x182/0x1b0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 81713d3788d2 ("IB/mlx5: Add implicit MR support") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Yishai Hadas <[email protected]> Reviewed-by: Artemy Kovalyov <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Reviewed-by: Jason Gunthorpe <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2019-08-07libata: add SG safety checks in SFF pio transfersJens Axboe1-0/+6
Abort processing of a command if we run out of mapped data in the SG list. This should never happen, but a previous bug caused it to be possible. Play it safe and attempt to abort nicely if we don't have more SG segments left. Reviewed-by: Kees Cook <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2019-08-07libata: have ata_scsi_rw_xlat() fail invalid passthrough requestsJens Axboe1-0/+21
For passthrough requests, libata-scsi takes what the user passes in as gospel. This can be problematic if the user fills in the CDB incorrectly. One example of that is in request sizes. For read/write commands, the CDB contains fields describing the transfer length of the request. These should match with the SG_IO header fields, but libata-scsi currently does no validation of that. Check that the number of blocks in the CDB for passthrough requests matches what was mapped into the request. If the CDB asks for more data then the validated SG_IO header fields, error it. Reported-by: Krishna Ram Prakash R <[email protected]> Reviewed-by: Kees Cook <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2019-08-07block: fix O_DIRECT error handling for bio fragmentsJens Axboe1-16/+12
0eb6ddfb865c tried to fix this up, but introduced a use-after-free of dio. Additionally, we still had an issue with error handling, as reported by Darrick: "I noticed a regression in xfs/747 (an unreleased xfstest for the xfs_scrub media scanning feature) on 5.3-rc3. I'll condense that down to a simpler reproducer: error-test: 0 209 linear 8:48 0 error-test: 209 1 error error-test: 210 6446894 linear 8:48 210 Basically we have a ~3G /dev/sdd and we set up device mapper to fail IO for sector 209 and to pass the io to the scsi device everywhere else. On 5.3-rc3, performing a directio pread of this range with a < 1M buffer (in other words, a request for fewer than MAX_BIO_PAGES bytes) yields EIO like you'd expect: pread64(3, 0x7f880e1c7000, 1048576, 0) = -1 EIO (Input/output error) pread: Input/output error +++ exited with 0 +++ But doing it with a larger buffer succeeds(!): pread64(3, "XFSB\0\0\20\0\0\0\0\0\0\fL\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 1146880, 0) = 1146880 read 1146880/1146880 bytes at offset 0 1 MiB, 1 ops; 0.0009 sec (1.124 GiB/sec and 1052.6316 ops/sec) +++ exited with 0 +++ (Note that the part of the buffer corresponding to the dm-error area is uninitialized) On 5.3-rc2, both commands would fail with EIO like you'd expect. The only change between rc2 and rc3 is commit 0eb6ddfb865c ("block: Fix __blkdev_direct_IO() for bio fragments"). AFAICT we end up in __blkdev_direct_IO with a 1120K buffer, which gets split into two bios: one for the first BIO_MAX_PAGES worth of data (1MB) and a second one for the 96k after that." Fix this by noting that it's always safe to dereference dio if we get BLK_QC_T_EAGAIN returned, as end_io hasn't been run for that case. So we can safely increment the dio size before calling submit_bio(), and then decrement it on failure (not that it really matters, as the bio and dio are going away). For error handling, return to the original method of just using 'ret' for tracking the error, and the size tracking in dio->size. Fixes: 0eb6ddfb865c ("block: Fix __blkdev_direct_IO() for bio fragments") Fixes: 6a43074e2f46 ("block: properly handle IOCB_NOWAIT for async O_DIRECT IO") Reported-by: Darrick J. Wong <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2019-08-07NFSv4: Ensure state recovery handles ETIMEDOUT correctlyTrond Myklebust2-2/+7
Ensure that the state recovery code handles ETIMEDOUT correctly, and also that we set RPC_TASK_TIMEOUT when recovering open state. Signed-off-by: Trond Myklebust <[email protected]>
2019-08-07Revert "drm/amdkfd: New IOCTL to allocate queue GWS"Alex Deucher2-47/+1
This reverts commit 1a058c3376765ee31d65e28cbbb9d4ff15120056. This interface is still in too much flux. Revert until it's sorted out. Acked-by: Oak Zeng <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-08-07x86: mtrr: cyrix: Mark expected switch fall-throughGustavo A. R. Silva1-0/+1
Mark switch cases where we are expecting to fall through. Fix the following warning (Building: i386_defconfig i386): arch/x86/kernel/cpu/mtrr/cyrix.c:99:6: warning: this statement may fall through [-Wimplicit-fallthrough=] Signed-off-by: Gustavo A. R. Silva <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Kees Cook <[email protected]> Link: https://lkml.kernel.org/r/20190805201712.GA19927@embeddedor
2019-08-07x86/ptrace: Mark expected switch fall-throughGustavo A. R. Silva1-0/+1
Mark switch cases where we are expecting to fall through. Fix the following warning (Building: allnoconfig i386): arch/x86/kernel/ptrace.c:202:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (unlikely(value == 0)) ^ arch/x86/kernel/ptrace.c:206:2: note: here default: ^~~~~~~ Signed-off-by: Gustavo A. R. Silva <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Kees Cook <[email protected]> Link: https://lkml.kernel.org/r/20190805195654.GA17831@embeddedor
2019-08-07ALSA: hda - Workaround for crackled sound on AMD controller (1022:1457)Takashi Iwai3-2/+70
A long-time problem on the recent AMD chip (X370, X470, B450, etc with PCI ID 1022:1457) with Realtek codecs is the crackled or distorted sound for capture streams, as well as occasional playback hiccups. After lengthy debugging sessions, the workarounds we've found are like the following: - Set up the proper driver caps for this controller, similar as the other AMD controller. - Correct the DMA position reporting with the fixed FIFO size, which is similar like as workaround used for VIA chip set. - Even after the position correction, PulseAudio still shows mysterious stalls of playback streams when a capture is triggered in timer-scheduled mode. Since we have no clear way to eliminate the stall, pass the BATCH PCM flag for PA to suppress the tsched mode as a temporary workaround. This patch implements the workarounds. For the driver caps, it defines a new preset, AXZ_DCAPS_PRESET_AMD_SB. It enables the FIFO- corrected position reporting (corresponding to the new position_fix=6) and enforces the SNDRV_PCM_INFO_BATCH flag. Note that the current implementation is merely a workaround. Hopefully we'll find a better alternative in future, especially about removing the BATCH flag hack again. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=195303 Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2019-08-07Revert "PCI: Add missing link delays required by the PCIe spec"Mika Westerberg3-86/+10
Commit c2bf1fc212f7 ("PCI: Add missing link delays required by the PCIe spec") turned out causing issues with some systems either by making them unresponsive or slowing down runtime and system wide resume of PCIe devices. While root cause for the unresponsiveness is still under investigation given the amount of issues reported better to revert it for now. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204413 Link: https://lore.kernel.org/linux-pci/SL2P216MB01878BBCD75F21D882AEEA2880C60@SL2P216MB0187.KORP216.PROD.OUTLOOK.COM/ Link: https://lore.kernel.org/linux-pci/[email protected]/ Reported-by: Matthias Andree <[email protected]> Reported-by: Paul Menzel <[email protected]> Reported-by: Nicholas Johnson <[email protected]> Signed-off-by: Mika Westerberg <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2019-08-07ALSA: hiface: fix multiple memory leak bugsWenwen Wang1-3/+8
In hiface_pcm_init(), 'rt' is firstly allocated through kzalloc(). Later on, hiface_pcm_init_urb() is invoked to initialize 'rt->out_urbs[i]'. In hiface_pcm_init_urb(), 'rt->out_urbs[i].buffer' is allocated through kzalloc(). However, if hiface_pcm_init_urb() fails, both 'rt' and 'rt->out_urbs[i].buffer' are not deallocated, leading to memory leak bugs. Also, 'rt->out_urbs[i].buffer' is not deallocated if snd_pcm_new() fails. To fix the above issues, free 'rt' and 'rt->out_urbs[i].buffer'. Fixes: a91c3fb2f842 ("Add M2Tech hiFace USB-SPDIF driver") Signed-off-by: Wenwen Wang <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2019-08-06Revert "drm/amdgpu: fix transform feedback GDS hang on gfx10 (v2)"Marek Olšák2-12/+1
This reverts commit 9ed2c993d723129f85101e51b2ccc36ef5400a67. SET_CONFIG_REG writes to memory if register shadowing is enabled, causing a VM fault. NGG streamout is unstable anyway, so all UMDs should use legacy streamout. I think Mesa is the only driver using NGG streamout. Signed-off-by: Marek Olšák <[email protected]> Reviewed-by: Le Ma <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-08-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds225-1274/+2402
Pull networking fixes from David Miller: "Yeah I should have sent a pull request last week, so there is a lot more here than usual: 1) Fix memory leak in ebtables compat code, from Wenwen Wang. 2) Several kTLS bug fixes from Jakub Kicinski (circular close on disconnect etc.) 3) Force slave speed check on link state recovery in bonding 802.3ad mode, from Thomas Falcon. 4) Clear RX descriptor bits before assigning buffers to them in stmmac, from Jose Abreu. 5) Several missing of_node_put() calls, mostly wrt. for_each_*() OF loops, from Nishka Dasgupta. 6) Double kfree_skb() in peak_usb can driver, from Stephane Grosjean. 7) Need to hold sock across skb->destructor invocation, from Cong Wang. 8) IP header length needs to be validated in ipip tunnel xmit, from Haishuang Yan. 9) Use after free in ip6 tunnel driver, also from Haishuang Yan. 10) Do not use MSI interrupts on r8169 chips before RTL8168d, from Heiner Kallweit. 11) Upon bridge device init failure, we need to delete the local fdb. From Nikolay Aleksandrov. 12) Handle erros from of_get_mac_address() properly in stmmac, from Martin Blumenstingl. 13) Handle concurrent rename vs. dump in netfilter ipset, from Jozsef Kadlecsik. 14) Setting NETIF_F_LLTX on mac80211 causes complete breakage with some devices, so revert. From Johannes Berg. 15) Fix deadlock in rxrpc, from David Howells. 16) Fix Kconfig deps of enetc driver, we must have PHYLIB. From Yue Haibing. 17) Fix mvpp2 crash on module removal, from Matteo Croce. 18) Fix race in genphy_update_link, from Heiner Kallweit. 19) bpf_xdp_adjust_head() stopped working with generic XDP when we fixes generic XDP to support stacked devices properly, fix from Jesper Dangaard Brouer. 20) Unbalanced RCU locking in rt6_update_exception_stamp_rt(), from David Ahern. 21) Several memory leaks in new sja1105 driver, from Vladimir Oltean" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (214 commits) net: dsa: sja1105: Fix memory leak on meta state machine error path net: dsa: sja1105: Fix memory leak on meta state machine normal path net: dsa: sja1105: Really fix panic on unregistering PTP clock net: dsa: sja1105: Use the LOCKEDS bit for SJA1105 E/T as well net: dsa: sja1105: Fix broken learning with vlan_filtering disabled net: dsa: qca8k: Add of_node_put() in qca8k_setup_mdio_bus() net: sched: sample: allow accessing psample_group with rtnl net: sched: police: allow accessing police->params with rtnl net: hisilicon: Fix dma_map_single failed on arm64 net: hisilicon: fix hip04-xmit never return TX_BUSY net: hisilicon: make hip04_tx_reclaim non-reentrant tc-testing: updated vlan action tests with batch create/delete net sched: update vlan action for batched events operations net: stmmac: tc: Do not return a fragment entry net: stmmac: Fix issues when number of Queues >= 4 net: stmmac: xgmac: Fix XGMAC selftests be2net: disable bh with spin_lock in be_process_mcc net: cxgb3_main: Fix a resource leak in a error path in 'init_one()' net: ethernet: sun4i-emac: Support phy-handle property for finding PHYs net: bridge: move default pvid init/deinit to NETDEV_REGISTER/UNREGISTER ...
2019-08-06RISC-V: Remove per cpu clocksourceAtish Patra1-4/+2
There is only one clocksource in RISC-V. The boot cpu initializes that clocksource. No need to keep a percpu data structure. Signed-off-by: Atish Patra <[email protected]> Signed-off-by: Paul Walmsley <[email protected]> Acked-by: Daniel Lezcano <[email protected]>
2019-08-06Merge branch 'sja1105-fixes'David S. Miller4-98/+75
Vladimir Oltean says: ==================== Fixes for SJA1105 DSA: FDBs, Learning and PTP This is an assortment of functional fixes for the sja1105 switch driver targeted for the "net" tree (although they apply on net-next just as well). Patch 1/5 ("net: dsa: sja1105: Fix broken learning with vlan_filtering disabled") repairs a breakage introduced in the early development stages of the driver: support for traffic from the CPU has broken "normal" frame forwarding (based on DMAC) - there is connectivity through the switch only because all frames are flooded. I debated whether this patch qualifies as a fix, since it puts the switch into a mode it has never operated in before (aka SVL). But "normal" forwarding did use to work before the "Traffic support for SJA1105 DSA driver" patchset, and arguably this patch should have been part of that. Also, it would be strange for this feature to be broken in the 5.2 LTS. Patch 2/5 ("net: dsa: sja1105: Use the LOCKEDS bit for SJA1105 E/T as well") is a simplification of a previous FDB-related patch that is currently in the 5.3 rc's. Patches 3/5 - 5/5 fix various crashes found while running linuxptp over the switch ports for extended periods of time, or in conjunction with other error conditions. The fixed-up commits were all introduced in 5.2. ==================== Signed-off-by: David S. Miller <[email protected]>
2019-08-06net: dsa: sja1105: Fix memory leak on meta state machine error pathVladimir Oltean1-0/+1
When RX timestamping is enabled and two link-local (non-meta) frames are received in a row, this constitutes an error. The tagger is always caching the last link-local frame, in an attempt to merge it with the meta follow-up frame when that arrives. To recover from the above error condition, the initial cached link-local frame is dropped and the second frame in a row is cached (in expectance of the second meta frame). However, when dropping the initial link-local frame, its backing memory was being leaked. Fixes: f3097be21bf1 ("net: dsa: sja1105: Add a state machine for RX timestamping") Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-08-06net: dsa: sja1105: Fix memory leak on meta state machine normal pathVladimir Oltean1-10/+1
After a meta frame is received, it is associated with the cached sp->data->stampable_skb from the DSA tagger private structure. Cached means its refcount is incremented with skb_get() in order for dsa_switch_rcv() to not free it when the tagger .rcv returns NULL. The mistake is that skb_unref() is not the correct function to use. It will correctly decrement the refcount (which will go back to zero) but the skb memory will not be freed. That is the job of kfree_skb(), which also calls skb_unref(). But it turns out that freeing the cached stampable_skb is in fact not necessary. It is still a perfectly valid skb, and now it is even annotated with the partial RX timestamp. So remove the skb_copy() altogether and simply pass the stampable_skb with a refcount of 1 (incremented by us, decremented by dsa_switch_rcv) up the stack. Fixes: f3097be21bf1 ("net: dsa: sja1105: Add a state machine for RX timestamping") Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-08-06net: dsa: sja1105: Really fix panic on unregistering PTP clockVladimir Oltean2-6/+5
The IS_ERR_OR_NULL(priv->clock) check inside sja1105_ptp_clock_unregister() is preventing cancel_delayed_work_sync from actually being run. Additionally, sja1105_ptp_clock_unregister() does not actually get run, when placed in sja1105_remove(). The DSA switch gets torn down, but the sja1105 module does not get unregistered. So sja1105_ptp_clock_unregister needs to be moved to sja1105_teardown, to be symmetrical with sja1105_ptp_clock_register which is called from the DSA sja1105_setup. It is strange to fix a "fixes" patch, but the probe failure can only be seen when the attached PHY does not respond to MDIO (issue which I can't pinpoint the reason to) and it goes away after I power-cycle the board. This time the patch was validated on a failing board, and the kernel panic from the fixed commit's message can no longer be seen. Fixes: 29dd908d355f ("net: dsa: sja1105: Cancel PTP delayed work on unregister") Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-08-06net: dsa: sja1105: Use the LOCKEDS bit for SJA1105 E/T as wellVladimir Oltean2-16/+13
It looks like the FDB dump taken from first-generation switches also contains information on whether entries are static or not. So use that instead of searching through the driver's tables. Fixes: d763778224ea ("net: dsa: sja1105: Implement is_static for FDB entries on E/T") Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-08-06net: dsa: sja1105: Fix broken learning with vlan_filtering disabledVladimir Oltean1-66/+55
When put under a bridge with vlan_filtering 0, the SJA1105 ports will flood all traffic as if learning was broken. This is because learning interferes with the rx_vid's configured by dsa_8021q as unique pvid's. So learning technically still *does* work, it's just that the learnt entries never get matched due to their unique VLAN ID. The setting that saves the day is Shared VLAN Learning, which on this switch family works exactly as desired: VLAN tagging still works (untagged traffic gets the correct pvid) and FDB entries are still populated with the correct contents including VID. Also, a frame cannot violate the forwarding domain restrictions enforced by its classified VLAN. It is just that the VID is ignored when looking up the FDB for taking a forwarding decision (selecting the egress port). This patch activates SVL, and the result is that frames with a learnt DMAC are no longer flooded in the scenario described above. Now exactly *because* SVL works as desired, we have to revisit some earlier patches: - It is no longer necessary to manipulate the VID of the 'bridge fdb {add,del}' command when vlan_filtering is off. This is because now, SVL is enabled for that case, so the actual VID does not matter*. - It is still desirable to hide dsa_8021q VID's in the FDB dump callback. But right now the dump callback should no longer hide duplicates (one per each front panel port's pvid, plus one for the VLAN that the CPU port is going to tag a TX frame with), because there shouldn't be any (the switch will match a single FDB entry no matter its VID anyway). * Not really... It's no longer necessary to transform a 'bridge fdb add' into 5 fdb add operations, but the user might still add a fdb entry with any vid, and all of them would appear as duplicates in 'bridge fdb show'. So force a 'bridge fdb add' to insert the VID of 0**, so that we can prune the duplicates at insertion time. ** The VID of 0 is better than 1 because it is always guaranteed to be in the ports' hardware filter. DSA also avoids putting the VID inside the netlink response message towards the bridge driver when we return this particular VID, which makes it suitable for FDB entries learnt with vlan_filtering off. Fixes: 227d07a07ef1 ("net: dsa: sja1105: Add support for traffic through standalone ports") Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: Georg Waibel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-08-06net: dsa: qca8k: Add of_node_put() in qca8k_setup_mdio_bus()Nishka Dasgupta1-1/+5
Each iteration of for_each_available_child_of_node() puts the previous node, but in the case of a return from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put() before the return. Additionally, the local variable ports in the function qca8k_setup_mdio_bus() takes the return value of of_get_child_by_name(), which gets a node but does not put it. If the function returns without putting ports, it may cause a memory leak. Hence put ports before the mid-loop return statement, and also outside the loop after its last usage in this function. Issues found with Coccinelle. Signed-off-by: Nishka Dasgupta <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-08-06Merge branch 'flow_offload-action-fixes'David S. Miller2-3/+3
Vlad Buslov says: ==================== action fixes for flow_offload infra compatibility Fix rcu warnings due to usage of action helpers that expect rcu read lock protection from rtnl-protected context of flow_offload infra. ==================== Signed-off-by: David S. Miller <[email protected]>
2019-08-06net: sched: sample: allow accessing psample_group with rtnlVlad Buslov1-1/+1
Recently implemented support for sample action in flow_offload infra leads to following rcu usage warning: [ 1938.234856] ============================= [ 1938.234858] WARNING: suspicious RCU usage [ 1938.234863] 5.3.0-rc1+ #574 Not tainted [ 1938.234866] ----------------------------- [ 1938.234869] include/net/tc_act/tc_sample.h:47 suspicious rcu_dereference_check() usage! [ 1938.234872] other info that might help us debug this: [ 1938.234875] rcu_scheduler_active = 2, debug_locks = 1 [ 1938.234879] 1 lock held by tc/19540: [ 1938.234881] #0: 00000000b03cb918 (rtnl_mutex){+.+.}, at: tc_new_tfilter+0x47c/0x970 [ 1938.234900] stack backtrace: [ 1938.234905] CPU: 2 PID: 19540 Comm: tc Not tainted 5.3.0-rc1+ #574 [ 1938.234908] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017 [ 1938.234911] Call Trace: [ 1938.234922] dump_stack+0x85/0xc0 [ 1938.234930] tc_setup_flow_action+0xed5/0x2040 [ 1938.234944] fl_hw_replace_filter+0x11f/0x2e0 [cls_flower] [ 1938.234965] fl_change+0xd24/0x1b30 [cls_flower] [ 1938.234990] tc_new_tfilter+0x3e0/0x970 [ 1938.235021] ? tc_del_tfilter+0x720/0x720 [ 1938.235028] rtnetlink_rcv_msg+0x389/0x4b0 [ 1938.235038] ? netlink_deliver_tap+0x95/0x400 [ 1938.235044] ? rtnl_dellink+0x2d0/0x2d0 [ 1938.235053] netlink_rcv_skb+0x49/0x110 [ 1938.235063] netlink_unicast+0x171/0x200 [ 1938.235073] netlink_sendmsg+0x224/0x3f0 [ 1938.235091] sock_sendmsg+0x5e/0x60 [ 1938.235097] ___sys_sendmsg+0x2ae/0x330 [ 1938.235111] ? __handle_mm_fault+0x12cd/0x19e0 [ 1938.235125] ? __handle_mm_fault+0x12cd/0x19e0 [ 1938.235138] ? find_held_lock+0x2b/0x80 [ 1938.235147] ? do_user_addr_fault+0x22d/0x490 [ 1938.235160] __sys_sendmsg+0x59/0xa0 [ 1938.235178] do_syscall_64+0x5c/0xb0 [ 1938.235187] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 1938.235192] RIP: 0033:0x7ff9a4d597b8 [ 1938.235197] Code: 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 65 8f 0c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 89 54 [ 1938.235200] RSP: 002b:00007ffcfe381c48 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 1938.235205] RAX: ffffffffffffffda RBX: 000000005d4497f9 RCX: 00007ff9a4d597b8 [ 1938.235208] RDX: 0000000000000000 RSI: 00007ffcfe381cb0 RDI: 0000000000000003 [ 1938.235211] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000006 [ 1938.235214] R10: 0000000000404ec2 R11: 0000000000000246 R12: 0000000000000001 [ 1938.235217] R13: 0000000000480640 R14: 0000000000000012 R15: 0000000000000001 Change tcf_sample_psample_group() helper to allow using it from both rtnl and rcu protected contexts. Fixes: a7a7be6087b0 ("net/sched: add sample action to the hardware intermediate representation") Signed-off-by: Vlad Buslov <[email protected]> Reviewed-by: Pieter Jansen van Vuuren <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-08-06net: sched: police: allow accessing police->params with rtnlVlad Buslov1-2/+2
Recently implemented support for police action in flow_offload infra leads to following rcu usage warning: [ 1925.881092] ============================= [ 1925.881094] WARNING: suspicious RCU usage [ 1925.881098] 5.3.0-rc1+ #574 Not tainted [ 1925.881100] ----------------------------- [ 1925.881104] include/net/tc_act/tc_police.h:57 suspicious rcu_dereference_check() usage! [ 1925.881106] other info that might help us debug this: [ 1925.881109] rcu_scheduler_active = 2, debug_locks = 1 [ 1925.881112] 1 lock held by tc/18591: [ 1925.881115] #0: 00000000b03cb918 (rtnl_mutex){+.+.}, at: tc_new_tfilter+0x47c/0x970 [ 1925.881124] stack backtrace: [ 1925.881127] CPU: 2 PID: 18591 Comm: tc Not tainted 5.3.0-rc1+ #574 [ 1925.881130] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017 [ 1925.881132] Call Trace: [ 1925.881138] dump_stack+0x85/0xc0 [ 1925.881145] tc_setup_flow_action+0x1771/0x2040 [ 1925.881155] fl_hw_replace_filter+0x11f/0x2e0 [cls_flower] [ 1925.881175] fl_change+0xd24/0x1b30 [cls_flower] [ 1925.881200] tc_new_tfilter+0x3e0/0x970 [ 1925.881231] ? tc_del_tfilter+0x720/0x720 [ 1925.881243] rtnetlink_rcv_msg+0x389/0x4b0 [ 1925.881250] ? netlink_deliver_tap+0x95/0x400 [ 1925.881257] ? rtnl_dellink+0x2d0/0x2d0 [ 1925.881264] netlink_rcv_skb+0x49/0x110 [ 1925.881275] netlink_unicast+0x171/0x200 [ 1925.881284] netlink_sendmsg+0x224/0x3f0 [ 1925.881299] sock_sendmsg+0x5e/0x60 [ 1925.881305] ___sys_sendmsg+0x2ae/0x330 [ 1925.881309] ? task_work_add+0x43/0x50 [ 1925.881314] ? fput_many+0x45/0x80 [ 1925.881329] ? __lock_acquire+0x248/0x1930 [ 1925.881342] ? find_held_lock+0x2b/0x80 [ 1925.881347] ? task_work_run+0x7b/0xd0 [ 1925.881359] __sys_sendmsg+0x59/0xa0 [ 1925.881375] do_syscall_64+0x5c/0xb0 [ 1925.881381] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 1925.881384] RIP: 0033:0x7feb245047b8 [ 1925.881388] Code: 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 65 8f 0c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 89 54 [ 1925.881391] RSP: 002b:00007ffc2d2a5788 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 1925.881395] RAX: ffffffffffffffda RBX: 000000005d4497ed RCX: 00007feb245047b8 [ 1925.881398] RDX: 0000000000000000 RSI: 00007ffc2d2a57f0 RDI: 0000000000000003 [ 1925.881400] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000006 [ 1925.881403] R10: 0000000000404ec2 R11: 0000000000000246 R12: 0000000000000001 [ 1925.881406] R13: 0000000000480640 R14: 0000000000000012 R15: 0000000000000001 Change tcf_police_rate_bytes_ps() and tcf_police_tcfp_burst() helpers to allow using them from both rtnl and rcu protected contexts. Fixes: 8c8cfc6ed274 ("net/sched: add police action to the hardware intermediate representation") Signed-off-by: Vlad Buslov <[email protected]> Reviewed-by: Pieter Jansen van Vuuren <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-08-06Merge branch 'hisilicon-fixes'David S. Miller1-12/+16
Jiangfeng Xiao says: ==================== net: hisilicon: Fix a few problems with hip04_eth During the use of the hip04_eth driver, several problems were found, which solved the hip04_tx_reclaim reentry problem, fixed the problem that hip04_mac_start_xmit never returns NETDEV_TX_BUSY and the dma_map_single failed on the arm64 platform. ==================== Signed-off-by: David S. Miller <[email protected]>
2019-08-06net: hisilicon: Fix dma_map_single failed on arm64Jiangfeng Xiao1-9/+11
On the arm64 platform, executing "ifconfig eth0 up" will fail, returning "ifconfig: SIOCSIFFLAGS: Input/output error." ndev->dev is not initialized, dma_map_single->get_dma_ops-> dummy_dma_ops->__dummy_map_page will return DMA_ERROR_CODE directly, so when we use dma_map_single, the first parameter is to use the device of platform_device. Signed-off-by: Jiangfeng Xiao <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-08-06net: hisilicon: fix hip04-xmit never return TX_BUSYJiangfeng Xiao1-1/+1
TX_DESC_NUM is 256, in tx_count, the maximum value of mod(TX_DESC_NUM - 1) is 254, the variable "count" in the hip04_mac_start_xmit function is never equal to (TX_DESC_NUM - 1), so hip04_mac_start_xmit never return NETDEV_TX_BUSY. tx_count is modified to mod(TX_DESC_NUM) so that the maximum value of tx_count can reach (TX_DESC_NUM - 1), then hip04_mac_start_xmit can reurn NETDEV_TX_BUSY. Signed-off-by: Jiangfeng Xiao <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-08-06net: hisilicon: make hip04_tx_reclaim non-reentrantJiangfeng Xiao1-2/+4
If hip04_tx_reclaim is interrupted while it is running and then __napi_schedule continues to execute hip04_rx_poll->hip04_tx_reclaim, reentrancy occurs and oops is generated. So you need to mask the interrupt during the hip04_tx_reclaim run. The kernel oops exception stack is as follows: Unable to handle kernel NULL pointer dereference at virtual address 00000050 pgd = c0003000 [00000050] *pgd=80000000a04003, *pmd=00000000 Internal error: Oops: 206 [#1] SMP ARM Modules linked in: hip04_eth mtdblock mtd_blkdevs mtd ohci_platform ehci_platform ohci_hcd ehci_hcd vfat fat sd_mod usb_storage scsi_mod usbcore usb_common CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 4.4.185 #1 Hardware name: Hisilicon A15 task: c0a250e0 task.stack: c0a00000 PC is at hip04_tx_reclaim+0xe0/0x17c [hip04_eth] LR is at hip04_tx_reclaim+0x30/0x17c [hip04_eth] pc : [<bf30c3a4>] lr : [<bf30c2f4>] psr: 600e0313 sp : c0a01d88 ip : 00000000 fp : c0601f9c r10: 00000000 r9 : c3482380 r8 : 00000001 r7 : 00000000 r6 : 000000e1 r5 : c3482000 r4 : 0000000c r3 : f2209800 r2 : 00000000 r1 : 00000000 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 32c5387d Table: 03d28c80 DAC: 55555555 Process swapper/0 (pid: 0, stack limit = 0xc0a00190) Stack: (0xc0a01d88 to 0xc0a02000) [<bf30c3a4>] (hip04_tx_reclaim [hip04_eth]) from [<bf30d2e0>] (hip04_rx_poll+0x88/0x368 [hip04_eth]) [<bf30d2e0>] (hip04_rx_poll [hip04_eth]) from [<c04c2d9c>] (net_rx_action+0x114/0x34c) [<c04c2d9c>] (net_rx_action) from [<c021eed8>] (__do_softirq+0x218/0x318) [<c021eed8>] (__do_softirq) from [<c021f284>] (irq_exit+0x88/0xac) [<c021f284>] (irq_exit) from [<c0240090>] (msa_irq_exit+0x11c/0x1d4) [<c0240090>] (msa_irq_exit) from [<c02677e0>] (__handle_domain_irq+0x110/0x148) [<c02677e0>] (__handle_domain_irq) from [<c0201588>] (gic_handle_irq+0xd4/0x118) [<c0201588>] (gic_handle_irq) from [<c0551700>] (__irq_svc+0x40/0x58) Exception stack(0xc0a01f30 to 0xc0a01f78) 1f20: c0ae8b40 00000000 00000000 00000000 1f40: 00000002 ffffe000 c0601f9c 00000000 ffffffff c0a2257c c0a22440 c0831a38 1f60: c0a01ec4 c0a01f80 c0203714 c0203718 600e0213 ffffffff [<c0551700>] (__irq_svc) from [<c0203718>] (arch_cpu_idle+0x20/0x3c) [<c0203718>] (arch_cpu_idle) from [<c025bfd8>] (cpu_startup_entry+0x244/0x29c) [<c025bfd8>] (cpu_startup_entry) from [<c054b0d8>] (rest_init+0xc8/0x10c) [<c054b0d8>] (rest_init) from [<c0800c58>] (start_kernel+0x468/0x514) Code: a40599e5 016086e2 018088e2 7660efe6 (503090e5) ---[ end trace 1db21d6d09c49d74 ]--- Kernel panic - not syncing: Fatal exception in interrupt CPU3: stopping CPU: 3 PID: 0 Comm: swapper/3 Tainted: G D O 4.4.185 #1 Signed-off-by: Jiangfeng Xiao <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-08-06Merge branch 'Fix-batched-event-generation-for-vlan-action'David S. Miller2-0/+103
Roman Mashak says: ==================== Fix batched event generation for vlan action When adding or deleting a batch of entries, the kernel sends up to TCA_ACT_MAX_PRIO (defined to 32 in kernel) entries in an event to user space. However it does not consider that the action sizes may vary and require different skb sizes. For example, consider the following script adding 32 entries with all supported vlan parameters (in order to maximize netlink messages size): % cat tc-batch.sh TC="sudo /mnt/iproute2.git/tc/tc" $TC actions flush action vlan for i in `seq 1 $1`; do cmd="action vlan push protocol 802.1q id 4094 priority 7 pipe \ index $i cookie aabbccddeeff112233445566778800a1 " args=$args$cmd done $TC actions add $args % % ./tc-batch.sh 32 Error: Failed to fill netlink attributes while adding TC action. We have an error talking to the kernel % patch 1 adds callback in tc_action_ops of vlan action, which calculates the action size, and passes size to tcf_add_notify()/tcf_del_notify(). patch 2 updates the TDC test suite with relevant vlan test cases. ==================== Acked-by: Jamal Hadi Salim <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-08-06tc-testing: updated vlan action tests with batch create/deleteRoman Mashak1-0/+94
Update TDC tests with cases varifying ability of TC to install or delete batches of vlan actions. Signed-off-by: Roman Mashak <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-08-06net sched: update vlan action for batched events operationsRoman Mashak1-0/+9
Add get_fill_size() routine used to calculate the action size when building a batch of events. Fixes: c7e2b9689 ("sched: introduce vlan action") Signed-off-by: Roman Mashak <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-08-06Merge tag 'mips_fixes_5.3_1' of ↵Linus Torvalds6-1/+20
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Paul Burton: "A few MIPS fixes for 5.3: - Various switch fall through annotations to fixup warnings & errors resulting from -Wimplicit-fallthrough. - A fix for systems (at least jazz) using an i8253 PIT as clocksource when it's not suitably configured. - Set struct cacheinfo's cpu_map_populated field to true, indicating that we filled in cache info detected from cop0 registers & avoiding complaints about that info being (intentionally) missing in devicetree" * tag 'mips_fixes_5.3_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: BCM63XX: Mark expected switch fall-through MIPS: OProfile: Mark expected switch fall-throughs MIPS: Annotate fall-through in Cavium Octeon code MIPS: Annotate fall-through in kvm/emulate.c mips: fix cacheinfo MIPS: kernel: only use i8253 clocksource with periodic clockevent
2019-08-06drm/amdgpu: pin the csb buffer on hw init for gfx v8Likun Gao1-0/+40
Without this pin, the csb buffer will be filled with inconsistent data after S3 resume. And that will causes gfx hang on gfxoff exit since this csb will be executed then. Signed-off-by: Likun Gao <[email protected]> Tested-by: Paul Gover <[email protected]> Reviewed-by: Feifei Xu <[email protected]> Reviewed-by: Xiaojie Yuan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-08-06Merge branch 'stmmac-fixes'David S. Miller4-12/+88
Jose Abreu says: ==================== net: stmmac: Fixes for -net Couple of fixes for -net. More info in commit log. ==================== Signed-off-by: David S. Miller <[email protected]>
2019-08-06net: stmmac: tc: Do not return a fragment entryJose Abreu1-1/+1
Do not try to return a fragment entry from TC list. Otherwise we may not clean properly allocated entries. Signed-off-by: Jose Abreu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-08-06net: stmmac: Fix issues when number of Queues >= 4Jose Abreu2-0/+8
When queues >= 4 we use different registers but we were not subtracting the offset of 4. Fix this. Found out by Coverity. Signed-off-by: Jose Abreu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-08-06net: stmmac: xgmac: Fix XGMAC selftestsJose Abreu2-11/+79
Fixup the XGMAC selftests by correctly finishing the implementation of set_filter callback. Result: $ ethtool -t enp4s0 The test result is PASS The test extra info: 1. MAC Loopback 0 2. PHY Loopback -95 3. MMC Counters -95 4. EEE -95 5. Hash Filter MC 0 6. Perfect Filter UC 0 7. MC Filter 0 8. UC Filter 0 9. Flow Control 0 Signed-off-by: Jose Abreu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-08-06Merge tag 'wireless-drivers-for-davem-2019-08-06' of ↵David S. Miller19-353/+538
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 5.3 Second set of fixes for 5.3. Lots of iwlwifi fixes have accumulated which consists most of patches in this pull request. Only most notable iwlwifi fixes are listed below. mwifiex * fix a regression related to WPA1 networks since v5.3-rc1 iwlwifi * fix use-after-free issues * fix DMA mapping API usage errors * fix frame drop occurring due to reorder buffer handling in RSS in certain conditions * fix rate scale locking issues * disable TX A-MSDU on older NICs as it causes problems and was never supposed to be supported * new PCI IDs * GEO_TX_POWER_LIMIT API issue that many people were hitting ==================== Signed-off-by: David S. Miller <[email protected]>
2019-08-06Merge branch 'for-linus' of ↵Linus Torvalds10-19/+120
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Jiri Kosina: - functional regression fix for some of the Logitech unifying devices, from Hans de Goede - race condition fix in hid-sony for bug severely affecting Valve/Android deployments, from Roderick Colenbrander - several fixes for issues found by syzbot/kasan, from Oliver Neukum and Hillf Danton - functional regression fix for Wacom Cintiq device, from Aaron Armstrong Skomra - a few other assorted device-specific quirks * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: sony: Fix race condition between rumble and device remove. HID: hiddev: do cleanup in failure of opening a device HID: hiddev: avoid opening a disconnected device HID: input: fix a4tech horizontal wheel custom usage HID: Add quirk for HP X1200 PIXART OEM mouse HID: holtek: test for sanity of intfdata HID: wacom: fix bit shift for Cintiq Companion 2 HID: quirks: Set the INCREMENT_USAGE_ON_DUPLICATE quirk on Saitek X52 HID: logitech-dj: Really fix return value of logi_dj_recv_query_hidpp_devices HID: Add 044f:b320 ThrustMaster, Inc. 2 in 1 DT HID: logitech-dj: add the Powerplay receiver HID: logitech-hidpp: add USB PID for a few more supported mice HID: logitech-dj: rename "gaming" receiver to "lightspeed"
2019-08-06be2net: disable bh with spin_lock in be_process_mccDenis Kirjanov2-6/+2
be_process_mcc() is invoked in 3 different places and always with BHs disabled except the be_poll function but since it's invoked from softirq with BHs disabled it won't hurt. v1->v2: added explanation to the patch v2->v3: add a missing call from be_cmds.c Signed-off-by: Denis Kirjanov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-08-06net: cxgb3_main: Fix a resource leak in a error path in 'init_one()'Christophe JAILLET1-1/+4
A call to 'kfree_skb()' is missing in the error handling path of 'init_one()'. This is already present in 'remove_one()' but is missing here. Signed-off-by: Christophe JAILLET <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-08-06net: ethernet: sun4i-emac: Support phy-handle property for finding PHYsChen-Yu Tsai1-1/+3
The sun4i-emac uses the "phy" property to find the PHY it's supposed to use. This property was deprecated in favor of "phy-handle" in commit 8c5b09447625 ("dt-bindings: net: sun4i-emac: Convert the binding to a schemas"). Add support for this new property name, and fall back to the old one in case the device tree hasn't been updated. Signed-off-by: Chen-Yu Tsai <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-08-06Merge branch 'x86/grand-schemozzle' of ↵Linus Torvalds7-40/+246
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull pti updates from Thomas Gleixner: "The performance deterioration departement is not proud at all to present yet another set of speculation fences to mitigate the next chapter in the 'what could possibly go wrong' story. The new vulnerability belongs to the Spectre class and affects GS based data accesses and has therefore been dubbed 'Grand Schemozzle' for secret communication purposes. It's officially listed as CVE-2019-1125. Conditional branches in the entry paths which contain a SWAPGS instruction (interrupts and exceptions) can be mis-speculated which results in speculative accesses with a wrong GS base. This can happen on entry from user mode through a mis-speculated branch which takes the entry from kernel mode path and therefore does not execute the SWAPGS instruction. The following speculative accesses are done with user GS base. On entry from kernel mode the mis-speculated branch executes the SWAPGS instruction in the entry from user mode path which has the same effect that the following GS based accesses are done with user GS base. If there is a disclosure gadget available in these code paths the mis-speculated data access can be leaked through the usual side channels. The entry from user mode issue affects all CPUs which have speculative execution. The entry from kernel mode issue affects only Intel CPUs which can speculate through SWAPGS. On CPUs from other vendors SWAPGS has semantics which prevent that. SMAP migitates both problems but only when the CPU is not affected by the Meltdown vulnerability. The mitigation is to issue LFENCE instructions in the entry from kernel mode path for all affected CPUs and on the affected Intel CPUs also in the entry from user mode path unless PTI is enabled because the CR3 write is serializing. The fences are as usual enabled conditionally and can be completely disabled on the kernel command line. The Spectre V1 documentation is updated accordingly. A big "Thank You!" goes to Josh for doing the heavy lifting for this round of hardware misfeature 'repair'. Of course also "Thank You!" to everybody else who contributed in one way or the other" * 'x86/grand-schemozzle' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Documentation: Add swapgs description to the Spectre v1 documentation x86/speculation/swapgs: Exclude ATOMs from speculation through SWAPGS x86/entry/64: Use JMP instead of JMPQ x86/speculation: Enable Spectre v1 swapgs mitigations x86/speculation: Prepare entry code for Spectre v1 swapgs mitigations
2019-08-06mmc: cavium: Add the missing dma unmap when the dma has finished.Kevin Hao1-0/+1
This fixes the below calltrace when the CONFIG_DMA_API_DEBUG is enabled. DMA-API: thunderx_mmc 0000:01:01.4: cpu touching an active dma mapped cacheline [cln=0x000000002fdf9800] WARNING: CPU: 21 PID: 1 at kernel/dma/debug.c:596 debug_dma_assert_idle+0x1f8/0x270 Modules linked in: CPU: 21 PID: 1 Comm: init Not tainted 5.3.0-rc1-next-20190725-yocto-standard+ #64 Hardware name: Marvell OcteonTX CN96XX board (DT) pstate: 80400009 (Nzcv daif +PAN -UAO) pc : debug_dma_assert_idle+0x1f8/0x270 lr : debug_dma_assert_idle+0x1f8/0x270 sp : ffff0000113cfc10 x29: ffff0000113cfc10 x28: 0000ffff8c880000 x27: ffff800bc72a0000 x26: ffff000010ff8000 x25: ffff000010ff8940 x24: ffff000010ff8968 x23: 0000000000000000 x22: ffff000010e83700 x21: ffff000010ea2000 x20: ffff000010e835c8 x19: ffff800bc2c73300 x18: ffffffffffffffff x17: 0000000000000000 x16: 0000000000000000 x15: ffff000010e835c8 x14: 6d20616d64206576 x13: 69746361206e6120 x12: 676e696863756f74 x11: 20757063203a342e x10: 31303a31303a3030 x9 : 303020636d6d5f78 x8 : 3230303030303030 x7 : 00000000000002fd x6 : ffff000010fd57d0 x5 : 0000000000000000 x4 : ffff0000106c5210 x3 : 00000000ffffffff x2 : 0000800bee9c0000 x1 : 57d5843f4aa62800 x0 : 0000000000000000 Call trace: debug_dma_assert_idle+0x1f8/0x270 wp_page_copy+0xb0/0x688 do_wp_page+0xa8/0x5b8 __handle_mm_fault+0x600/0xd00 handle_mm_fault+0x118/0x1e8 do_page_fault+0x200/0x500 do_mem_abort+0x50/0xb0 el0_da+0x20/0x24 ---[ end trace a005534bd23e109f ]--- DMA-API: Mapped at: debug_dma_map_sg+0x94/0x350 cvm_mmc_request+0x3c4/0x988 __mmc_start_request+0x9c/0x1f8 mmc_start_request+0x7c/0xb0 mmc_blk_mq_issue_rq+0x5c4/0x7b8 Signed-off-by: Kevin Hao <[email protected]> Fixes: ba3869ff32e4 ("mmc: cavium: Add core MMC driver for Cavium SOCs") Cc: [email protected] Signed-off-by: Ulf Hansson <[email protected]>
2019-08-06mmc: cavium: Set the correct dma max segment size for mmc_hostKevin Hao1-1/+2
We have set the mmc_host.max_seg_size to 8M, but the dma max segment size of PCI device is set to 64K by default in function pci_device_add(). The mmc_host.max_seg_size is used to set the max segment size of the blk queue. Then this mismatch will trigger a calltrace like below when a bigger than 64K segment request arrives at mmc dev. So we should consider the limitation of the cvm_mmc_host when setting the mmc_host.max_seg_size. DMA-API: thunderx_mmc 0000:01:01.4: mapping sg segment longer than device claims to support [len=131072] [max=65536] WARNING: CPU: 6 PID: 238 at kernel/dma/debug.c:1221 debug_dma_map_sg+0x2b8/0x350 Modules linked in: CPU: 6 PID: 238 Comm: kworker/6:1H Not tainted 5.3.0-rc1-next-20190724-yocto-standard+ #62 Hardware name: Marvell OcteonTX CN96XX board (DT) Workqueue: kblockd blk_mq_run_work_fn pstate: 80c00009 (Nzcv daif +PAN +UAO) pc : debug_dma_map_sg+0x2b8/0x350 lr : debug_dma_map_sg+0x2b8/0x350 sp : ffff00001770f9e0 x29: ffff00001770f9e0 x28: ffffffff00000000 x27: 00000000ffffffff x26: ffff800bc2c73180 x25: ffff000010e83700 x24: 0000000000000002 x23: 0000000000000001 x22: 0000000000000001 x21: 0000000000000000 x20: ffff800bc48ba0b0 x19: ffff800bc97e8c00 x18: ffffffffffffffff x17: 0000000000000000 x16: 0000000000000000 x15: ffff000010e835c8 x14: 6874207265676e6f x13: 6c20746e656d6765 x12: 7320677320676e69 x11: 7070616d203a342e x10: 31303a31303a3030 x9 : 303020636d6d5f78 x8 : 35363d78616d5b20 x7 : 00000000000002fd x6 : ffff000010fd57dc x5 : 0000000000000000 x4 : ffff0000106c61f0 x3 : 00000000ffffffff x2 : 0000800bee060000 x1 : 7010678df3041a00 x0 : 0000000000000000 Call trace: debug_dma_map_sg+0x2b8/0x350 cvm_mmc_request+0x3c4/0x988 __mmc_start_request+0x9c/0x1f8 mmc_start_request+0x7c/0xb0 mmc_blk_mq_issue_rq+0x5c4/0x7b8 mmc_mq_queue_rq+0x11c/0x278 blk_mq_dispatch_rq_list+0xb0/0x568 blk_mq_do_dispatch_sched+0x6c/0x108 blk_mq_sched_dispatch_requests+0x110/0x1b8 __blk_mq_run_hw_queue+0xb0/0x118 blk_mq_run_work_fn+0x28/0x38 process_one_work+0x210/0x490 worker_thread+0x48/0x458 kthread+0x130/0x138 ret_from_fork+0x10/0x1c Signed-off-by: Kevin Hao <[email protected]> Fixes: ba3869ff32e4 ("mmc: cavium: Add core MMC driver for Cavium SOCs") Cc: [email protected] Signed-off-by: Ulf Hansson <[email protected]>
2019-08-06mmc: sdhci-sprd: Fix the incorrect soft reset operation when runtime resumingBaolin Wang10-12/+12
The SD host controller specification defines 3 types software reset: software reset for data line, software reset for command line and software reset for all. Software reset for all means this reset affects the entire Host controller except for the card detection circuit. In sdhci_runtime_resume_host() we always do a software "reset for all", which causes the Spreadtrum variant controller to work abnormally after resuming. To fix the problem, let's do a software reset for the data and the command part, rather than "for all". However, as sdhci_runtime_resume() is a common sdhci function and we don't want to change the behaviour for other variants, let's introduce a new in-parameter for it. This enables the caller to decide if a "reset for all" shall be done or not. Signed-off-by: Baolin Wang <[email protected]> Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller") Cc: [email protected] Signed-off-by: Ulf Hansson <[email protected]>
2019-08-06Input: iforce - add sanity checksOliver Neukum1-0/+5
The endpoint type should also be checked before a device is accepted. Reported-by: [email protected] Signed-off-by: Oliver Neukum <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.