aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2016-09-21ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2809pxe04Hans de Goede1-0/+9
Add a node enabling the gsl3670 touchscreen controller found on sun8i-a23-polaroid-mid2809pxe04 tablets. Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Acked-by: Chen-Yu Tsai <[email protected]>
2016-09-21ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2407pxe03Hans de Goede1-0/+19
Add a node enabling the gsl1680 touchscreen controller found on sun8i-a23-polaroid-mid2407pxe03 tablets. Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Acked-by: Chen-Yu Tsai <[email protected]>
2016-09-21ARM: dts: sun8i: Add touchscreen node for sun8i-a23-inet86dzHans de Goede1-0/+9
The inet86dz tablet has a gsl1680 touchscreen, add a dt node describing it. Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Acked-by: Chen-Yu Tsai <[email protected]>
2016-09-21ARM: dts: sun8i: Add touchscreen node for sun8i-a23-gt90hHans de Goede1-0/+9
The gt90h tablet has a gsl3675 touchscreen, add a dt node describing it. Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Acked-by: Chen-Yu Tsai <[email protected]>
2016-09-11ARM: dts: gr8: Add support for the GR8 evaluation boardMylène Josserand2-0/+343
The GR8-EVB is a small board with an NextThing GR8, an Hynix MLC NAND, an AXP209 PMIC, USB host and OTG, an SPDIF output and a connectors for CSI, I2S and LCD. Signed-off-by: Mylène Josserand <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Acked-by: Chen-Yu Tsai <[email protected]>
2016-09-11ARM: dts: Add NextThing GR8 dtsiMylène Josserand1-0/+1087
The GR8 is an SoC made by Nextthing loosely based on the sun5i family. Since it's not clear yet what we can factor out and merge with the A10s and A13 support, let's keep it out of the sun5i.dtsi include tree. We will figure out what can be shared when things settle down. Signed-off-by: Mylène Josserand <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Acked-by: Chen-Yu Tsai <[email protected]>
2016-09-10ARM: dts: sun8i: Move A23/A33 usbphy and usb_otg nodes to common dtsiChen-Yu Tsai3-64/+50
The usbphy and usb_otg nodes in the A23 and A33 dts files only differ by compatible, and for the usbphy, the size of one of its register regions. Move all the common bits to the A23/A33 common dtsi file. Signed-off-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]>
2016-09-10ARM: sun8i: a23/a33: Add RGB666 pinsMaxime Ripard1-0/+10
The LCD output needs to be muxed. Add the proper pinctrl node. Signed-off-by: Maxime Ripard <[email protected]> Acked-by: Chen-Yu Tsai <[email protected]>
2016-09-10ARM: sun8i: a33: Add display pipelineMaxime Ripard1-0/+152
Add all the needed blocks to the A33 DTSI. Signed-off-by: Maxime Ripard <[email protected]> Acked-by: Chen-Yu Tsai <[email protected]>
2016-09-10ARM: sun8i: Convert the A23 and A33 to the CCUMaxime Ripard3-306/+75
Now that we have support for the CCU driver in sunxi-ng, convert the A23 and A33 DTs to that driver. Signed-off-by: Maxime Ripard <[email protected]> Acked-by: Chen-Yu Tsai <[email protected]>
2016-09-10ARM: dts: sun6i: switch A31/A31s to new CCU clock bindingsChen-Yu Tsai1-327/+97
Now that we have a different clock representation, switch to it. Signed-off-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]>
2016-09-10Merge branch 'sunxi/clk-for-4.9' into sunxi/dt-for-4.9Maxime Ripard24-79/+3860
2016-09-10clk: sunxi-ng: Add hardware dependencyJean Delvare1-0/+1
The sunxi-ng clock driver is useless for other architectures. Signed-off-by: Jean Delvare <[email protected]> Acked-by: Stephen Boyd <[email protected]> Signed-off-by: Maxime Ripard <[email protected]>
2016-09-10clk: sunxi-ng: Add A23 CCUMaxime Ripard4-0/+751
Add support for the clock unit found in the A23. Due to the similarities with the A33, it also shares its clock IDs to allow sharing the DTSI. Signed-off-by: Maxime Ripard <[email protected]> Acked-by: Chen-Yu Tsai <[email protected]>
2016-09-10clk: sunxi-ng: Add A33 CCU supportMaxime Ripard7-0/+1071
This commit introduces the clocks found in the Allwinner A33 CCU. Since this SoC is very similar to the A23, and we share a significant share of the DTSI, the clock IDs that are going to be used will also be shared with the A23, hence the name of the various header files. Signed-off-by: Maxime Ripard <[email protected]> Acked-by: Chen-Yu Tsai <[email protected]>
2016-09-10clk: sunxi-ng: Add N-class clocks supportMaxime Ripard4-0/+173
Add support for the class with a single factor, N, being a multiplier. Signed-off-by: Maxime Ripard <[email protected]> Acked-by: Chen-Yu Tsai <[email protected]>
2016-09-10clk: sunxi-ng: mux: Add mux table macroMaxime Ripard1-13/+13
Add a new macro to declare muxes based on a table and a gate. Signed-off-by: Maxime Ripard <[email protected]> Acked-by: Chen-Yu Tsai <[email protected]>
2016-09-10clk: sunxi-ng: div: Allow to set a maximumMaxime Ripard5-33/+55
Some dividers might have a maximum value that is lower than the width of the register. Add a field to _ccu_div to handle those case properly. If the field is set to 0, the code will assume that the maximum value is the maximum one that can be used with the field register width. Otherwise, we'll use whatever value has been set. Signed-off-by: Maxime Ripard <[email protected]> Acked-by: Chen-Yu Tsai <[email protected]>
2016-09-10clk: sunxi-ng: div: Add kerneldoc for the _ccu_div structureMaxime Ripard1-0/+14
The internal _ccu_div structure is meant to be embedded into other structures to combine the various dividers and to form the clock classes support. Start to document those structures by using kerneldoc. Signed-off-by: Maxime Ripard <[email protected]>
2016-09-10clk: sunxi-ng: div: Add mux table macrosMaxime Ripard1-7/+21
Add some macros to ease the declaration of clocks that are using them. Signed-off-by: Maxime Ripard <[email protected]> Acked-by: Chen-Yu Tsai <[email protected]>
2016-09-06devicetree: Add vendor prefix for FriendlyARMJames Pettigrew1-0/+1
Guangzhou FriendlyARM Computer Tech Co., Ltd is a Chinese ARM board vendor. Signed-off-by: James Pettigrew <[email protected]> Reviewed-by: Rask Ingemann Lambertsen <[email protected]> Acked-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]>
2016-09-06ARM: dts: sun8i: Add dts file for the NanoPi NEO SBCJames Pettigrew2-0/+126
The NanoPi NEO is a minimal H3 based SBC. It comes with 256/512M RAM, a micro SD slot, 10/100Mbit ethernet and a single USB-A port. Signed-off-by: James Pettigrew <[email protected]> Reviewed-by: Rask Ingemann Lambertsen <[email protected]> Signed-off-by: Maxime Ripard <[email protected]>
2016-09-05ARM: dts: sun8i-q8-common: Add support for SDIO wifi controllersHans de Goede1-0/+49
Most of the sun8i q8 boards have an SDIO wifi controller, on the variants which use an USB wifi controller, this will result in a couple of error msg-s in dmesg when proving the sdio bus and an used mmc controller. The best way to deal with wifi on this boards really is to simply let the kernel auto-detect usb or sdio wifi controllers, so we will just have to live with the few errors in dmesg. This has been tested on a23 based q8 tablets with ESP8089, RTL8703AS and RTL8189FTV wifi controllers. Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Maxime Ripard <[email protected]>
2016-09-05ARM: dts: sun8i: Add dts file for the Orange Pi Plus2E SBCHans de Goede2-0/+54
The Orange Pi Plus2E is an extended version of the Orange Pi Pc Plus, with 2G RAM and an external gbit ethernet phy. Note currently the dts is pretty much empty (except for including the pc-plus dts), I've a local patch which enables the emac actually making this dts different from the pc-plus one, but that needs the h3 emac driver to get merged first. Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Maxime Ripard <[email protected]>
2016-09-05ARM: dts: sun8i: Orange Pi Plus dts is for the Plus and Plus 2Hans de Goede1-1/+1
Update the sun8i-h3-orangepi-plus.dts model string to reflect that it is valid for both the Orange Pi Plus and the Orange Pi Plus 2. This is also meant to help users realize that it is not valid for the new Orange Pi Plus 2E, which will get its own dts. Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Maxime Ripard <[email protected]>
2016-08-31ARM: dts: sun8i: Add PWM controller node in H3Milo Kim1-0/+8
Acked-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Milo Kim <[email protected]> Signed-off-by: Maxime Ripard <[email protected]>
2016-08-27ARM: dts: sun8i: Add dts file for inet-d978_rev2 tabletsIcenowy Zheng2-0/+89
The inet-d978_rev2 is a pcb used in generic A33 based tablets. It features volume buttons, micro-usb otg, headphone connector and a power button. On the board a Realtek RTL8723BS SDIO Wi-Fi module are soldered, and there is also a accompanied board which has a Goodix GT9271 soldered. As this board is desired to create tablets with a Home key dealed by GT9271, a LED is present at the front panel at the position of the Home key. Signed-off-by: Icenowy Zheng <[email protected]> Signed-off-by: Maxime Ripard <[email protected]>
2016-08-27ARM: dts: sun9i: Add missing #interrupt-cells to R_PIO pinctrl device nodeChen-Yu Tsai1-2/+1
The R_PIO device node is missing #interrupt-cells, which causes interrupt parsing to fail to match it as a valid interrupt controller. Add #interrupt-cells to it. Also remove the unnecesary #address-cells and #size-cells. Fixes: 1ac56a6da9e1 ("ARM: dts: sun9i: Add A80 R_PIO pin controller device node") Signed-off-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]>
2016-08-27ARM: dts: sun8i: Rename reference-design-tablet touchscreen nodeHans de Goede1-4/+2
Rename the reference-design-tablet touchscreen node from gsl1680 to touchscreen, all? tablets seem to use the same power and interrupt gpio-s, but not all tablets use a gsl1680 controller making the gsl1680 name somewhat misleading. Also move the reg and compatible property to the actual tablet dts as they may differ per tablet. Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Maxime Ripard <[email protected]>
2016-08-27ARM: dts: sun5i: Add dts file for the Empire Electronix M712 tabletHans de Goede2-0/+52
Add a dts file for the Empire Electronix M712 tablet, this is a 7" A13 tablet, with micro-usb (otg), headphone and micro-sd slots on the outside. It uses a Goodix gt811 touchscreen controller, a RTL8188CTV wifi chip and a DMART06 (1238a4) accelerometer. Note currently the dts for this is somewhat empty. This will change once we add support for the touchscreen and accelerometer. Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Maxime Ripard <[email protected]>
2016-08-27ARM: dts: sun5i: Convert inet-98v-rev2 dts to use reference-design-tablet.dtsiHans de Goede1-163/+1
This results in a nice cleanup :) Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Maxime Ripard <[email protected]>
2016-08-27ARM: dts: sun4i: Disable ohci1 on ba10-tv-boxHans de Goede1-4/+0
The ehci1/ohci1 pair on the ba10-tv-box is connected to an USB-2 wifi module soldered on the PCB, so there enabling ohci1 is not necessary. Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Maxime Ripard <[email protected]>
2016-08-26ARM: dts: sun8i: Add dt node for esp8089 wifi chip on polaroid-mid2809Hans de Goede1-0/+42
The polaroid-mid2809 tablet has an esp8089 wifi chip, add a dt node describing it. Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Maxime Ripard <[email protected]>
2016-08-26ARM: dts: sun8i: Add dt node for esp8089 wifi chip on polaroid-mid2407Hans de Goede1-0/+42
The polaroid-mid2407 tablet has an esp8089 wifi chip, add a dt node describing it. Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Maxime Ripard <[email protected]>
2016-08-25ARM: dts: sun8i: add NAND controller node for A23/A33Icenowy Zheng1-0/+21
A23/A33 has a NAND controller which can now be used properly. Add a device node for it. The DMA function cannot work because of changed DMA IP block, so it's temporarily removed in the device node. However, with PIO mode it can still work. Tested on an Aoson M751s tablet with Boris Brezillon's "mtd: nand: allow vendor specific detection/initialization" patchset, which is needed for the large-block MLC chip to be recognized correctly. ( http://lists.infradead.org/pipermail/linux-mtd/2016-June/068198.html ) Signed-off-by: Icenowy Zheng <[email protected]> Signed-off-by: Maxime Ripard <[email protected]>
2016-08-25clk: sunxi-ng: Add A31/A31s clocksChen-Yu Tsai7-1/+1613
Add a new style driver for the clock control unit in Allwinner A31/A31s. A few clocks are still missing: - MIPI PLL's HDMI mode support - EMAC clock Signed-off-by: Chen-Yu Tsai <[email protected]> Acked-by: Rob Herring <[email protected]> Signed-off-by: Maxime Ripard <[email protected]>
2016-08-25clk: sunxi-ng: mux: Add clk notifier functionsChen-Yu Tsai2-0/+50
On sunxi we support cpufreq by changing the clock rate of PLL-CPU. It's possible the clock output of the PLL goes out of the CPU's operational limits when the PLL's multipliers / dividers are changed and it hasn't stabilized yet. This would result in the CPU hanging. To circumvent this, we temporarily switch the CPU mux clock to another stable clock before the rate change, and switch it back after the PLL stabilizes. This is done with clk notifiers registered on the PLL. This patch adds common functions for notifiers to reparent mux clocks. Signed-off-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]>
2016-08-25clk: sunxi-ng: mux: support fixed pre-dividers on multiple parentsChen-Yu Tsai3-11/+16
Some clocks on the A31 have fixed pre-dividers on multiple parents. Add support for them. Signed-off-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]>
2016-08-25clk: sunxi-ng: mux: Add support for mux tablesChen-Yu Tsai2-6/+23
Some clock muxes have holes, i.e. invalid or unconnected inputs, between parent mux values. Add support for specifying a mux table to map clock parents to mux values. Signed-off-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]>
2016-08-25clk: sunxi-ng: mux: Rename mux macro to be consistentMaxime Ripard4-6/+6
Rename the internal mux macro to be consistent with the other internal structure macros. Signed-off-by: Maxime Ripard <[email protected]>
2016-08-22ARM: dts: sun6i: Add new dts file for tablets using the inet-q972 PCBHans de Goede2-0/+101
Add a dts file for tablets using the generic inet-q972 PCB. Tablets with this PCB feature a mini-hdmi output, micro-usb usb-host, micro-usb usb-otg, 3.5mm headphone jack, a micro sd slot, (mini) power-barrel and an usb wifi module. This has been tested on a 9.7" 1024x768 qware qw tb9718-qhd tablet. Signed-off-by: Hans de Goede <[email protected]> Acked-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]>
2016-08-22ARM: dts: sun6i: Add sun6i-reference-design-tablet.dtsiHans de Goede2-146/+194
Just like with a13/a23/a33 most a31 tablets are derived from the same reference design. Add a .dtsi file with all the common bits to avoid endless copy and pasting of these. The sun6i-reference-design-tablet.dtsi this commit adds is a copy of sun6i-a31s-colorfly-e708-q1.dts with a few tablet specific bits removed / left in sun6i-a31s-colorfly-e708-q1.dts. Signed-off-by: Hans de Goede <[email protected]> Acked-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]>
2016-08-22ARM: dts: sun6i: colorfly-e708-q1: Remove unused mma8452_int_e708_q1 nodeHans de Goede1-7/+0
The presence of the mma8452_int_e708_q1 node is a copy and paste error, remove it. Signed-off-by: Hans de Goede <[email protected]> Acked-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]>
2016-08-22ARM: dts: sun9i: Switch to the AC100 RTC clock outputs for osc32kChen-Yu Tsai3-6/+15
The 32.768 kHz clock inside the A80 SoC is fed from an external source, typically the AC100 RTC module. Make the osc32k placeholder a fixed-factor clock so board dts files can specify its source. Signed-off-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]>
2016-08-22ARM: dts: sun9i: cubieboard4: Add device node for AC100Chen-Yu Tsai1-0/+24
Signed-off-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]>
2016-08-22ARM: dts: sun9i: a80-optimus: Add device node for AC100Chen-Yu Tsai1-0/+24
Signed-off-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]>
2016-08-22ARM: dts: sun8i: reference-design-tablet: Add gsl1680 touchscreen nodeHans de Goede1-0/+28
Almost all sun8i tablets use a gsl1680 touchscreen controller, so add a node describing it to reference-design-tablet.dtsi. Almost all, but not all, so mark it as disabled by default (dts files will also need to supply a firmware-name and resolution info). Signed-off-by: Hans de Goede <[email protected]> Acked-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]>
2016-08-22ARM: dts: sun8i: Add dt node for rtl8703as wifi chip on ga10hHans de Goede1-0/+18
The ga10h tablet has a rtl8703as wifi chip, add a dt node describing it. This enables usage of wifi on this tablet (together with the out of tree rtl8732bs driver). Signed-off-by: Hans de Goede <[email protected]> Acked-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]>
2016-08-22ARM: dts: sun8i: Use sun8i-reference-design-tablet for gt90h dtsHans de Goede1-191/+1
This results in quite a nice cleanup for this dts file. As an added bonus this also enables full otg support. I've tested that this works as advertised. Signed-off-by: Hans de Goede <[email protected]> Acked-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]>
2016-08-22ARM: dts: sun8i: Add dts file for the Orange Pi Lite SBCHans de Goede2-0/+179
The Orange Pi Lite SBC is a small H3 based SBC, with 512MB RAM, micro-sd slot, HDMI out, 2 USB-A connectors, 1 micro-USB connector, sdio attached rtl8189ftv wifi and an ir receiver. Signed-off-by: Hans de Goede <[email protected]> Acked-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.