| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Free the resources if the fence needs to be ignored
during the ratio calculation
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: David M Nieto <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
There are two occurrances where objects are being free'd via
a put call and yet they are being referenced after this. Fix these
by adding in the missing continue statement so that the put on the
end of the loop is skipped over.
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Thomas Zimmermann <[email protected]>
Addresses-Coverity: ("Use after free")
Fixes: 11e8f5fd223b ("drm: Add simpledrm driver")
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Add the missing unlock before return from function devm_aperture_acquire()
in the error handling case.
Signed-off-by: Zou Wei <[email protected]>
Signed-off-by: Thomas Zimmermann <[email protected]>
Reported-by: Hulk Robot <[email protected]>
Fixes: 730e7992dc1b ("drm/aperture: Add infrastructure for aperture ownership")
Cc: Thomas Zimmermann <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Maxime Ripard <[email protected]>
Cc: Maarten Lankhorst <[email protected]>
Cc: Maxime Ripard <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: [email protected]
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
struct resource start and end fields are not always long long,
so using %llx to print them can cause build warnings (below).
Fix these by using the special "%pr" for printing struct resource info.
../drivers/gpu/drm/tiny/simpledrm.c: In function ‘simpledrm_device_init_mm’:
../include/drm/drm_print.h:412:32: warning: format ‘%llx’ expects argument of type ‘long long unsigned int’, but argument 3 has type ‘resource_size_t {aka unsigned int}’ [-Wformat=]
../drivers/gpu/drm/tiny/simpledrm.c:533:54: note: format string is defined here
drm_err(dev, "could not acquire memory range [0x%llx:0x%llx]: error %d\n",
~~~^
%x
../include/drm/drm_print.h:412:32: warning: format ‘%llx’ expects argument of type ‘long long unsigned int’, but argument 4 has type ‘resource_size_t {aka unsigned int}’ [-Wformat=]
../drivers/gpu/drm/tiny/simpledrm.c:533:61: note: format string is defined here
drm_err(dev, "could not acquire memory range [0x%llx:0x%llx]: error %d\n",
~~~^
%x
Fixes: 4aae79f77e3a ("drm/simpledrm: Acquire memory aperture for framebuffer")
Signed-off-by: Randy Dunlap <[email protected]>
Cc: Thomas Zimmermann <[email protected]>
Cc: [email protected]
Signed-off-by: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The pdev field got removed from struct drm_device recently. Replace
the invalid reference with an upcast from the struct's dev field.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Dave Airlie <[email protected]>
Reported-by: Stephen Rothwell <[email protected]>
Fixes: b347e04452ff ("drm: Remove pdev field from struct drm_device")
Cc: Thomas Zimmermann <[email protected]>
Cc: Maxime Ripard <[email protected]>
Cc: Maarten Lankhorst <[email protected]>
Cc: Maxime Ripard <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: [email protected]
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
It should have been an OVERLAY from the beginning. The documentation
stipulates that there should be an unique PRIMARY plane per CRTC.
Fixes: fc1acf317b01 ("drm/ingenic: Add support for the IPU")
Cc: <[email protected]> # 5.8+
Signed-off-by: Paul Cercueil <[email protected]>
Acked-by: Simon Ser <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
When devm_ioremap_resource() fails, a clear enough error message will be
printed by its subfunction __devm_ioremap_resource(). The error
information contains the device name, failure cause, and possibly resource
information.
Therefore, remove the error printing here to simplify code and reduce the
binary size.
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Zhen Lei <[email protected]>
Reviewed-by: Steven Price <[email protected]>
Signed-off-by: Steven Price <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Since Chunming Zhou left AMD last year we are down to only
two maintainers once more. So add Xinhu Pan as another
contact as well.
Signed-off-by: Christian König <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Reviewed-by: Xinhui Pan <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The shadow bo is created in pinned state, so we have to unpin it when
dropping the reference. Otherwise ttm is unhappy and throws a WARN()
on release.
Signed-off-by: Gerd Hoffmann <[email protected]>
Acked-by: Thomas Zimmermann <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Not needed, qxl_io_destroy_primary() does that for us.
Signed-off-by: Gerd Hoffmann <[email protected]>
Acked-by: Thomas Zimmermann <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
It's very confusing for userspace to have to deal with inconsistencies
here, and some drivers screwed this up a bit. Most just ommitted the
format list when they meant to say that only linear modifier is
allowed, but some also meant that only implied modifiers are
acceptable (because actually none of the planes registered supported
modifiers).
Now that this is all done consistently across all drivers, document
the rules and enforce it in the drm core.
v2:
- Make the capability a link (Simon)
- Note that all is lost before 5.1.
v3:
- Use drm_WARN_ON (Lyude)
Acked-by: Pekka Paalanen <[email protected]>
Reviewed-by: Emil Velikov <[email protected]>
Reviewed-by: Lyude Paul <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Cc: Simon Ser <[email protected]>
Reviewed-by: Lucas Stach <[email protected]>
Cc: Pekka Paalanen <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Cc: Maarten Lankhorst <[email protected]>
Cc: Maxime Ripard <[email protected]>
Cc: Thomas Zimmermann <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
drivers/gpu/drm/kmb/kmb_dsi.c:284:3-4: Unneeded semicolon
drivers/gpu/drm/kmb/kmb_dsi.c:304:3-4: Unneeded semicolon
drivers/gpu/drm/kmb/kmb_dsi.c:321:3-4: Unneeded semicolon
drivers/gpu/drm/kmb/kmb_dsi.c:340:3-4: Unneeded semicolon
drivers/gpu/drm/kmb/kmb_dsi.c:364:2-3: Unneeded semicolon
Remove unneeded semicolon.
Generated by: scripts/coccinelle/misc/semicolon.cocci
Fixes: ade896460e4a ("drm: DRM_KMB_DISPLAY should depend on ARCH_KEEMBAY")
CC: Geert Uytterhoeven <[email protected]>
Reported-by: kernel test robot <[email protected]>
Signed-off-by: kernel test robot <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20210511161123.GA21597@90a0f0cadc2d
|
|
This change fixes all of the arm64 issues we've had in the driver.
ARM support is provided in svga version 3, for which support we've added
in previous changes. svga version 3 currently lacks many of the
advanced features (in particular 3D support is lacking) but
that will change in time.
Signed-off-by: Zack Rusin <[email protected]>
Reviewed-by: Roland Scheidegger <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
SVGA3 is the next version of our PCI device. Some of the changes
include using MMIO for register accesses instead of ioports,
deprecating the FIFO MMIO and removing a lot of the old and
legacy functionality. SVGA3 doesn't support guest backed
objects right now so everything except 3D is working.
v2: Fixes all the static analyzer warnings
Signed-off-by: Zack Rusin <[email protected]>
Cc: Martin Krastev <[email protected]>
Reviewed-by: Roland Scheidegger <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Now since Christian reworked TTM to always keep objects on the LRU
list unless they are pinned we shouldn't need the reservation
semaphore. It makes the driver code a lot cleaner, especially
because it was a little hard to reason when and where the
reservation semaphore needed to be held.
Signed-off-by: Zack Rusin <[email protected]>
Reviewed-by: Roland Scheidegger <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
In cases where the dirty linear memory range spans multiple sample sheets
in a surface, the dirty surface region is incorrectly computed.
To do this correctly and in an optimized fashion we would have to compute
the dirty region of each sample sheet and compute the union of those
regions.
But assuming that cpu writing to a multisample surface is rather a corner
case than a common case, just set the dirty region to the full surface.
This fixes OpenGL piglit errors with SVGA_FORCE_COHERENT=1
and the piglit test:
fbo-depthstencil blit default_fb -samples=2 -auto
Fixes: 9ca7d19ff8ba ("drm/vmwgfx: Add surface dirty-tracking callbacks")
Signed-off-by: Thomas Hellstrom <[email protected]>
Reviewed-by: Charmaine Lee <[email protected]>
Reviewed-by: Roland Scheidegger <[email protected]>
Signed-off-by: Zack Rusin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The SVGA3dCmdDXGenMips command uses a shader-resource view to access
the underlying surface. Normally accesses using that view-type are not
dirtying the underlying surface, but that particular command is an
exception.
Mark the surface gpu-dirty after a SVGA3dCmdDXGenMips command has been
submitted.
This fixes the piglit getteximage-formats test run with
SVGA_FORCE_COHERENT=1
Fixes: a9f58c456e9d ("drm/vmwgfx: Be more restrictive when dirtying resources")
Signed-off-by: Thomas Hellstrom <[email protected]>
Reviewed-by: Charmaine Lee <[email protected]>
Reviewed-by: Roland Scheidegger <[email protected]>
Signed-off-by: Zack Rusin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
SVGA_REG_ENABLE is a register name, and SVGA_REG_ENABLE_(ENABLE|
DISABLE|HIDE) are its valid values. We were incorrectly setting
the register value to itself. This happened to work because
the SVGA_REG_ENABLE is happens to to be the same value as
SVGA_REG_ENABLE_ENABLE, but is still semantically incorrect.
Lets use the correct enum when setting SVGA_REG_ENABLE.
Signed-off-by: Zack Rusin <[email protected]>
Reviewed-by: Roland Scheidegger <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
When devm_ioremap_resource() fails, a clear enough error message will be
printed by its subfunction __devm_ioremap_resource(). The error
information contains the device name, failure cause, and possibly resource
information.
Therefore, remove the error printing here to simplify code and reduce the
binary size.
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Zhen Lei <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Backmerging to get v5.12 fixes. Requested for vmwgfx.
Signed-off-by: Thomas Zimmermann <[email protected]>
|
|
Platforms without AGP don't provide the AGP header. Only include it
if CONFIG_AGP is set.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Fixes: 04dfe19a5ed6 ("drm: Mark AGP implementation and ioctls as legacy")
Cc: Thomas Zimmermann <[email protected]>
Cc: Alex Deucher <[email protected]>
Cc: Christian König <[email protected]>
Cc: Maarten Lankhorst <[email protected]>
Cc: Maxime Ripard <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: "Christian König" <[email protected]>
Cc: Christophe JAILLET <[email protected]>
Cc: Jason Yan <[email protected]>
Cc: Lee Jones <[email protected]>
Cc: Sam Ravnborg <[email protected]>
Cc: [email protected]
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Ville pointed this out to me when fixing some issues in
drm_dp_read_downstream_info() - the DPCD version check here is bogus as
there's no DisplayPort versions prior to 1.0. The original code from i915
that this was extracted from actually did:
dpcd[DP_DPCD_REV] == DP_DPCD_REV_10
Which is correct, and somehow got missed when extracting this function. So
let's fix this. Note that as far as I'm aware, I don't think this fixes any
actual issues users are hitting.
Signed-off-by: Lyude Paul <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Reviewed-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Only UMs drivers use DRM's core AGP code and ioctls. Mark the icotls
as legacy. Add the _legacy_ infix to all AGP functions. Move the
declarations to the public and internal legacy header files. The agp
field in struct drm_device is now located in the structure's legacy
section. Adapt drivers to the changes.
AGP code now depends on CONFIG_DRM_LEGACY.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Acked-by: Christian König <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
DRM's AGP helpers for PCI are only required by legacy drivers. Put them
behind CONFIG_DRM_LEGACY and add the _legacy_ infix.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Acked-by: Christian König <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
With the AGP code already duplicated, move over the AGP structures
from the legacy code base in to radeon. The AGP data structures that
are required by radeon are now declared within the driver. The AGP
instance is stored in struct radeon_device.agp.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Acked-by: Christian König <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Radeon calls DRMs core AGP helpers. These helpers are only required
by legacy drivers. Reimplement the code in radeon to uncouple radeon
from the legacy code.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Acked-by: Christian König <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
|
|
Commit b9d79e4ca4ff ("fbmem: Mark proc_fb_seq_ops as __maybe_unused")
places the '__maybe_unused' in an entirely incorrect location between
the "struct" keyword and the structure name.
It's a wonder that gcc accepts that silently, but clang quite reasonably
warns about it:
drivers/video/fbdev/core/fbmem.c:736:21: warning: attribute declaration must precede definition [-Wignored-attributes]
static const struct __maybe_unused seq_operations proc_fb_seq_ops = {
^
Fix it.
Cc: Guenter Roeck <[email protected]>
Cc: Daniel Vetter <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Pull drm fixes from Dave Airlie:
"Bit later than usual, I queued them all up on Friday then promptly
forgot to write the pull request email. This is mainly amdgpu fixes,
with some radeon/msm/fbdev and one i915 gvt fix thrown in.
amdgpu:
- MPO hang workaround
- Fix for concurrent VM flushes on vega/navi
- dcefclk is not adjustable on navi1x and newer
- MST HPD debugfs fix
- Suspend/resumes fixes
- Register VGA clients late in case driver fails to load
- Fix GEM leak in user framebuffer create
- Add support for polaris12 with 32 bit memory interface
- Fix duplicate cursor issue when using overlay
- Fix corruption with tiled surfaces on VCN3
- Add BO size and stride check to fix BO size verification
radeon:
- Fix off-by-one in power state parsing
- Fix possible memory leak in power state parsing
msm:
- NULL ptr dereference fix
fbdev:
- procfs disabled warning fix
i915:
- gvt: Fix a possible division by zero in vgpu display rate
calculation"
* tag 'drm-next-2021-05-10' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu: Use device specific BO size & stride check.
drm/amdgpu: Init GFX10_ADDR_CONFIG for VCN v3 in DPG mode.
drm/amd/pm: initialize variable
drm/radeon: Avoid power table parsing memory leaks
drm/radeon: Fix off-by-one power_state index heap overwrite
drm/amd/display: Fix two cursor duplication when using overlay
drm/amdgpu: add new MC firmware for Polaris12 32bit ASIC
fbmem: Mark proc_fb_seq_ops as __maybe_unused
drm/msm/dpu: Delete bonkers code
drm/i915/gvt: Prevent divided by zero when calculating refresh rate
amdgpu: fix GEM obj leak in amdgpu_display_user_framebuffer_create
drm/amdgpu: Register VGA clients after init can no longer fail
drm/amdgpu: Handling of amdgpu_device_resume return value for graceful teardown
drm/amdgpu: fix r initial values
drm/amd/display: fix wrong statement in mst hpd debugfs
amdgpu/pm: set pp_dpm_dcefclk to readonly on NAVI10 and newer gpus
amdgpu/pm: Prevent force of DCEFCLK on NAVI10 and SIENNA_CICHLID
drm/amdgpu: fix concurrent VM flushes on Vega/Navi v2
drm/amd/display: Reject non-zero src_y and src_x for video planes
|
|
Pull block fix from Jens Axboe:
"Turns out the bio max size change still has issues, so let's get it
reverted for 5.13-rc1. We'll shake out the issues there and defer it
to 5.14 instead"
* tag 'block-5.13-2021-05-09' of git://git.kernel.dk/linux-block:
Revert "bio: limit bio max size"
|
|
Pull cifs fixes from Steve French:
"Three small SMB3 chmultichannel related changesets (also for stable)
from the SMB3 test event this week.
The other fixes are still in review/testing"
* tag '5.13-rc-smb3-part3' of git://git.samba.org/sfrench/cifs-2.6:
smb3: if max_channels set to more than one channel request multichannel
smb3: do not attempt multichannel to server which does not support it
smb3: when mounting with multichannel include it in requested capabilities
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
"A set of scheduler updates:
- Prevent PSI state corruption when schedule() races with cgroup
move.
A recent commit combined two PSI callbacks to reduce the number of
cgroup tree updates, but missed that schedule() can drop rq::lock
for load balancing, which opens the race window for
cgroup_move_task() which then observes half updated state.
The fix is to solely use task::ps_flags instead of looking at the
potentially mismatching scheduler state
- Prevent an out-of-bounds access in uclamp caused bu a rounding
division which can lead to an off-by-one error exceeding the
buckets array size.
- Prevent unfairness caused by missing load decay when a task is
attached to a cfs runqueue.
The old load of the task was attached to the runqueue and never
removed. Fix it by enforcing the load update through the hierarchy
for unthrottled run queue instances.
- A documentation fix fot the 'sched_verbose' command line option"
* tag 'sched-urgent-2021-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix unfairness caused by missing load decay
sched: Fix out-of-bound access in uclamp
psi: Fix psi state corruption when schedule() races with cgroup move
sched,doc: sched_debug_verbose cmdline should be sched_verbose
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"A set of locking related fixes and updates:
- Two fixes for the futex syscall related to the timeout handling.
FUTEX_LOCK_PI does not support the FUTEX_CLOCK_REALTIME bit and
because it's not set the time namespace adjustment for clock
MONOTONIC is applied wrongly.
FUTEX_WAIT cannot support the FUTEX_CLOCK_REALTIME bit because its
always a relative timeout.
- Cleanups in the futex syscall entry points which became obvious
when the two timeout handling bugs were fixed.
- Cleanup of queued_write_lock_slowpath() as suggested by Linus
- Fixup of the smp_call_function_single_async() prototype"
* tag 'locking-urgent-2021-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Make syscall entry points less convoluted
futex: Get rid of the val2 conditional dance
futex: Do not apply time namespace adjustment on FUTEX_LOCK_PI
Revert 337f13046ff0 ("futex: Allow FUTEX_CLOCK_REALTIME with FUTEX_WAIT op")
locking/qrwlock: Cleanup queued_write_lock_slowpath()
smp: Fix smp_call_function_single_async prototype
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fix from Borislav Petkov:
"Handle power-gating of AMD IOMMU perf counters properly when they are
used"
* tag 'perf_urgent_for_v5.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/events/amd/iommu: Fix invalid Perf result due to IOMMU PMC power-gating
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"A bunch of things accumulated for x86 in the last two weeks:
- Fix guest vtime accounting so that ticks happening while the guest
is running can also be accounted to it. Along with a consolidation
to the guest-specific context tracking helpers.
- Provide for the host NMI handler running after a VMX VMEXIT to be
able to run on the kernel stack correctly.
- Initialize MSR_TSC_AUX when RDPID is supported and not RDTSCP (virt
relevant - real hw supports both)
- A code generation improvement to TASK_SIZE_MAX through the use of
alternatives
- The usual misc and related cleanups and improvements"
* tag 'x86_urgent_for_v5.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
KVM: x86: Consolidate guest enter/exit logic to common helpers
context_tracking: KVM: Move guest enter/exit wrappers to KVM's domain
context_tracking: Consolidate guest enter/exit wrappers
sched/vtime: Move guest enter/exit vtime accounting to vtime.h
sched/vtime: Move vtime accounting external declarations above inlines
KVM: x86: Defer vtime accounting 'til after IRQ handling
context_tracking: Move guest exit vtime accounting to separate helpers
context_tracking: Move guest exit context tracking to separate helpers
KVM/VMX: Invoke NMI non-IST entry instead of IST entry
x86/cpu: Remove write_tsc() and write_rdtscp_aux() wrappers
x86/cpu: Initialize MSR_TSC_AUX if RDTSCP *or* RDPID is supported
x86/resctrl: Fix init const confusion
x86: Delete UD0, UD1 traces
x86/smpboot: Remove duplicate includes
x86/cpu: Use alternative to generate the TASK_SIZE_MAX constant
|
|
This reverts commit cd2c7545ae1beac3b6aae033c7f31193b3255946.
Alex reports that the commit causes corruption with LUKS on ext4. Revert
it for now so that this can be investigated properly.
Link: https://lore.kernel.org/linux-block/1620493841.bxdq8r5haw.none@localhost/
Reported-by: Alex Xu (Hello71) <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix to avoid over-allocating the kernel's mapping on !MMU systems,
which could lead to up to 2MiB of lost memory
- The SiFive address extension errata only manifest on rv64, they are
now disabled on rv32 where they are unnecessary
- A pair of late-landing cleanups
* tag 'riscv-for-linus-5.13-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: remove unused handle_exception symbol
riscv: Consistify protect_kernel_linear_mapping_text_rodata() use
riscv: enable SiFive errata CIP-453 and CIP-1200 Kconfig only if CONFIG_64BIT=y
riscv: Only extend kernel reservation if mapped read-only
|
|
intel_dp_check_mst_status() uses a 14-byte array to read the DPRX Event
Status Indicator data, but then passes that buffer at offset 10 off as
an argument to drm_dp_channel_eq_ok().
End result: there are only 4 bytes remaining of the buffer, yet
drm_dp_channel_eq_ok() wants a 6-byte buffer. gcc-11 correctly warns
about this case:
drivers/gpu/drm/i915/display/intel_dp.c: In function ‘intel_dp_check_mst_status’:
drivers/gpu/drm/i915/display/intel_dp.c:3491:22: warning: ‘drm_dp_channel_eq_ok’ reading 6 bytes from a region of size 4 [-Wstringop-overread]
3491 | !drm_dp_channel_eq_ok(&esi[10], intel_dp->lane_count)) {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/i915/display/intel_dp.c:3491:22: note: referencing argument 1 of type ‘const u8 *’ {aka ‘const unsigned char *’}
In file included from drivers/gpu/drm/i915/display/intel_dp.c:38:
include/drm/drm_dp_helper.h:1466:6: note: in a call to function ‘drm_dp_channel_eq_ok’
1466 | bool drm_dp_channel_eq_ok(const u8 link_status[DP_LINK_STATUS_SIZE],
| ^~~~~~~~~~~~~~~~~~~~
6:14 elapsed
This commit just extends the original array by 2 zero-initialized bytes,
avoiding the warning.
There may be some underlying bug in here that caused this confusion, but
this is at least no worse than the existing situation that could use
random data off the stack.
Cc: Jani Nikula <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Cc: Joonas Lahtinen <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Dave Airlie <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Pull more SCSI updates from James Bottomley:
"This is a set of minor fixes in various drivers (qla2xxx, ufs,
scsi_debug, lpfc) one doc fix and a fairly large update to the fnic
driver to remove the open coded iteration functions in favour of the
scsi provided ones"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: fnic: Use scsi_host_busy_iter() to traverse commands
scsi: fnic: Kill 'exclude_id' argument to fnic_cleanup_io()
scsi: scsi_debug: Fix cmd_per_lun, set to max_queue
scsi: ufs: core: Narrow down fast path in system suspend path
scsi: ufs: core: Cancel rpm_dev_flush_recheck_work during system suspend
scsi: ufs: core: Do not put UFS power into LPM if link is broken
scsi: qla2xxx: Prevent PRLI in target mode
scsi: qla2xxx: Add marginal path handling support
scsi: target: tcmu: Return from tcmu_handle_completions() if cmd_id not found
scsi: ufs: core: Fix a typo in ufs-sysfs.c
scsi: lpfc: Fix bad memory access during VPD DUMP mailbox command
scsi: lpfc: Fix DMA virtual address ptr assignment in bsg
scsi: lpfc: Fix illegal memory access on Abort IOCBs
scsi: blk-mq: Fix build warning when making htmldocs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- Convert sh and sparc to use generic shell scripts to generate the
syscall headers
- refactor .gitignore files
- Update kernel/config_data.gz only when the content of the .config
is really changed, which avoids the unneeded re-link of vmlinux
- move "remove stale files" workarounds to scripts/remove-stale-files
- suppress unused-but-set-variable warnings by default for Clang
as well
- fix locale setting LANG=C to LC_ALL=C
- improve 'make distclean'
- always keep intermediate objects from scripts/link-vmlinux.sh
- move IF_ENABLED out of <linux/kconfig.h> to make it self-contained
- misc cleanups
* tag 'kbuild-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits)
linux/kconfig.h: replace IF_ENABLED() with PTR_IF() in <linux/kernel.h>
kbuild: Don't remove link-vmlinux temporary files on exit/signal
kbuild: remove the unneeded comments for external module builds
kbuild: make distclean remove tag files in sub-directories
kbuild: make distclean work against $(objtree) instead of $(srctree)
kbuild: refactor modname-multi by using suffix-search
kbuild: refactor fdtoverlay rule
kbuild: parameterize the .o part of suffix-search
arch: use cross_compiling to check whether it is a cross build or not
kbuild: remove ARCH=sh64 support from top Makefile
.gitignore: prefix local generated files with a slash
kbuild: replace LANG=C with LC_ALL=C
Makefile: Move -Wno-unused-but-set-variable out of GCC only block
kbuild: add a script to remove stale generated files
kbuild: update config_data.gz only when the content of .config is changed
.gitignore: ignore only top-level modules.builtin
.gitignore: move tags and TAGS close to other tag files
kernel/.gitgnore: remove stale timeconst.h and hz.bc
usr/include: refactor .gitignore
genksyms: fix stale comment
...
|
|
Mounting with "multichannel" is obviously implied if user requested
more than one channel on mount (ie mount parm max_channels>1).
Currently both have to be specified. Fix that so that if max_channels
is greater than 1 on mount, enable multichannel rather than silently
falling back to non-multichannel.
Signed-off-by: Steve French <[email protected]>
Reviewed-By: Tom Talpey <[email protected]>
Cc: <[email protected]> # v5.11+
Reviewed-by: Shyam Prasad N <[email protected]>
|
|
We were ignoring CAP_MULTI_CHANNEL in the server response - if the
server doesn't support multichannel we should not be attempting it.
See MS-SMB2 section 3.2.5.2
Reviewed-by: Shyam Prasad N <[email protected]>
Reviewed-By: Tom Talpey <[email protected]>
Cc: <[email protected]> # v5.8+
Signed-off-by: Steve French <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates and fixes from Michael Ellerman:
"A bit of a mixture of things, tying up some loose ends.
There's the removal of the nvlink code, which dependend on a commit in
the vfio tree. Then the enablement of huge vmalloc which was in next
for a few weeks but got dropped due to conflicts. And there's also a
few fixes.
Summary:
- Remove the nvlink support now that it's only user has been removed.
- Enable huge vmalloc mappings for Radix MMU (P9).
- Fix KVM conversion to gfn-based MMU notifier callbacks.
- Fix a kexec/kdump crash with hot plugged CPUs.
- Fix boot failure on 32-bit with CONFIG_STACKPROTECTOR.
- Restore alphabetic order of the selects under CONFIG_PPC.
Thanks to: Christophe Leroy, Christoph Hellwig, Nicholas Piggin,
Sandipan Das, and Sourabh Jain"
* tag 'powerpc-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
KVM: PPC: Book3S HV: Fix conversion to gfn-based MMU notifier callbacks
powerpc/kconfig: Restore alphabetic order of the selects under CONFIG_PPC
powerpc/32: Fix boot failure with CONFIG_STACKPROTECTOR
powerpc/powernv/memtrace: Fix dcache flushing
powerpc/kexec_file: Use current CPU info while setting up FDT
powerpc/64s/radix: Enable huge vmalloc mappings
powerpc/powernv: remove the nvlink support
|
|
In the SMB3/SMB3.1.1 negotiate protocol request, we are supposed to
advertise CAP_MULTICHANNEL capability when establishing multiple
channels has been requested by the user doing the mount. See MS-SMB2
sections 2.2.3 and 3.2.5.2
Without setting it there is some risk that multichannel could fail
if the server interpreted the field strictly.
Reviewed-By: Tom Talpey <[email protected]>
Reviewed-by: Shyam Prasad N <[email protected]>
Cc: <[email protected]> # v5.8+
Signed-off-by: Steve French <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.13-rc1, including fixes from bpf, can and
netfilter trees. Self-contained fixes, nothing risky.
Current release - new code bugs:
- dsa: ksz: fix a few bugs found by static-checker in the new driver
- stmmac: fix frame preemption handshake not triggering after
interface restart
Previous releases - regressions:
- make nla_strcmp handle more then one trailing null character
- fix stack OOB reads while fragmenting IPv4 packets in openvswitch
and net/sched
- sctp: do asoc update earlier in sctp_sf_do_dupcook_a
- sctp: delay auto_asconf init until binding the first addr
- stmmac: clear receive all(RA) bit when promiscuous mode is off
- can: mcp251x: fix resume from sleep before interface was brought up
Previous releases - always broken:
- bpf: fix leakage of uninitialized bpf stack under speculation
- bpf: fix masking negation logic upon negative dst register
- netfilter: don't assume that skb_header_pointer() will never fail
- only allow init netns to set default tcp cong to a restricted algo
- xsk: fix xp_aligned_validate_desc() when len == chunk_size to avoid
false positive errors
- ethtool: fix missing NLM_F_MULTI flag when dumping
- can: m_can: m_can_tx_work_queue(): fix tx_skb race condition
- sctp: fix a SCTP_MIB_CURRESTAB leak in sctp_sf_do_dupcook_b
- bridge: fix NULL-deref caused by a races between assigning
rx_handler_data and setting the IFF_BRIDGE_PORT bit
Latecomer:
- seg6: add counters support for SRv6 Behaviors"
* tag 'net-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits)
atm: firestream: Use fallthrough pseudo-keyword
net: stmmac: Do not enable RX FIFO overflow interrupts
mptcp: fix splat when closing unaccepted socket
i40e: Remove LLDP frame filters
i40e: Fix PHY type identifiers for 2.5G and 5G adapters
i40e: fix the restart auto-negotiation after FEC modified
i40e: Fix use-after-free in i40e_client_subtask()
i40e: fix broken XDP support
netfilter: nftables: avoid potential overflows on 32bit arches
netfilter: nftables: avoid overflows in nft_hash_buckets()
tcp: Specify cmsgbuf is user pointer for receive zerocopy.
mlxsw: spectrum_mr: Update egress RIF list before route's action
net: ipa: fix inter-EE IRQ register definitions
can: m_can: m_can_tx_work_queue(): fix tx_skb race condition
can: mcp251x: fix resume from sleep before interface was brought up
can: mcp251xfd: mcp251xfd_probe(): add missing can_rx_offload_del() in error path
can: mcp251xfd: mcp251xfd_probe(): fix an error pointer dereference in probe
netfilter: nftables: Fix a memleak from userdata error path in new objects
netfilter: remove BUG_ON() after skb_header_pointer()
netfilter: nfnetlink_osf: Fix a missing skb_header_pointer() NULL check
...
|
|
<linux/kconfig.h> is included from all the kernel-space source files,
including C, assembly, linker scripts. It is intended to contain a
minimal set of macros to evaluate CONFIG options.
IF_ENABLED() is an intruder here because (x ? y : z) is C code, which
should not be included from assembly files or linker scripts.
Also, <linux/kconfig.h> is no longer self-contained because NULL is
defined in <linux/stddef.h>.
Move IF_ENABLED() out to <linux/kernel.h> as PTR_IF(). PTF_IF()
takes the general boolean expression instead of a CONFIG option
so that it fits better in <linux/kernel.h>.
Signed-off-by: Masahiro Yamada <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
|
|
Merge master back into next, this allows us to resolve some conflicts in
arch/powerpc/Kconfig, and also re-sort the symbols under config PPC so
that they are in alphabetical order again.
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Add SECMARK revision 1 to fix incorrect layout that prevents
from remove rule with this target, from Phil Sutter.
2) Fix pernet exit path spat in arptables, from Florian Westphal.
3) Missing rcu_read_unlock() for unknown nfnetlink callbacks,
reported by syzbot, from Eric Dumazet.
4) Missing check for skb_header_pointer() NULL pointer in
nfnetlink_osf.
5) Remove BUG_ON() after skb_header_pointer() from packet path
in several conntrack helper and the TCP tracker.
6) Fix memleak in the new object error path of userdata.
7) Avoid overflows in nft_hash_buckets(), reported by syzbot,
also from Eric.
8) Avoid overflows in 32bit arches, from Eric.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
netfilter: nftables: avoid potential overflows on 32bit arches
netfilter: nftables: avoid overflows in nft_hash_buckets()
netfilter: nftables: Fix a memleak from userdata error path in new objects
netfilter: remove BUG_ON() after skb_header_pointer()
netfilter: nfnetlink_osf: Fix a missing skb_header_pointer() NULL check
netfilter: nfnetlink: add a missing rcu_read_unlock()
netfilter: arptables: use pernet ops struct during unregister
netfilter: xt_SECMARK: add new revision to fix structure layout
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Nguyen, Anthony L says:
====================
Intel Wired LAN Driver Updates 2021-05-07
This series contains updates to i40e driver only.
Magnus fixes XDP by adding and correcting checks that were caused by a
previous commit which introduced a new variable but did not account for
it in all paths.
Yunjian Wang adds a return in an error path to prevent reading a freed
pointer.
Jaroslaw forces link reset when changing FEC so that changes take
affect.
Mateusz fixes PHY types for 2.5G and 5G as there is a differentiation on
PHY identifiers based on operation.
Arkadiusz removes filtering of LLDP frames for software DCB as this is
preventing them from being properly transmitted.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
i40e: Remove LLDP frame filters
i40e: Fix PHY type identifiers for 2.5G and 5G adapters
i40e: fix the restart auto-negotiation after FEC modified
i40e: Fix use-after-free in i40e_client_subtask()
i40e: fix broken XDP support
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add pseudo-keyword macro fallthrough[1]
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through
Signed-off-by: Wei Ming Chen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|