| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In m_can_read_fifo(), if the second call to m_can_fifo_read() fails,
the function jump to the out_fail label and returns without calling
m_can_receive_skb(). This means that the skb previously allocated by
alloc_can_skb() is not freed. In other terms, this is a memory leak.
This patch adds a goto label to destroy the skb if an error occurs.
Issue was found with GCC -fanalyzer, please follow the link below for
details.
Fixes: e39381770ec9 ("can: m_can: Disable IRQs on FIFO bus errors")
Link: https://lore.kernel.org/all/[email protected]
Cc: [email protected]
Cc: Matt Kline <[email protected]>
Signed-off-by: Vincent Mailhol <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
|
|
With the design of this driver, this condition is often triggered.
However, the counter that this interrupt indicates an overflow is never
read either, so overflowing is harmless.
On my system, when a CAN bus starts flapping up and down, this locks up
the whole system with lots of interrupts and printks.
Specifically, this interrupt indicates the CEL field of ECR has
overflowed. All reads of ECR mask out CEL.
Fixes: e0d1f4816f2a ("can: m_can: add Bosch M_CAN controller support")
Link: https://lore.kernel.org/all/[email protected]
Cc: [email protected]
Signed-off-by: Brian Silverman <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
|
|
If the last channel is not available then "dev" is freed. Fortunately,
we can just use "pdev->irq" instead.
Also we should check if at least one channel was set up.
Fixes: fd734c6f25ae ("can/sja1000: add driver for EMS PCMCIA card")
Link: https://lore.kernel.org/all/20211124145041.GB13656@kili
Cc: [email protected]
Signed-off-by: Dan Carpenter <[email protected]>
Acked-by: Oliver Hartkopp <[email protected]>
Tested-by: Oliver Hartkopp <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
|
|
After calling netif_receive_skb(skb), dereferencing skb is unsafe.
Especially, the can_frame cf which aliases skb memory is dereferenced
just after the call netif_receive_skb(skb).
Reordering the lines solves the issue.
Fixes: b21d18b51b31 ("can: Topcliff: Add PCH_CAN driver.")
Link: https://lore.kernel.org/all/[email protected]
Cc: [email protected]
Signed-off-by: Vincent Mailhol <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
|
|
Lenovo ALC897 platform had headset Mic.
This patch enable supported headset Mic.
Signed-off-by: Kailang Yang <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Commit 598a90f2002c ("scsi: qla2xxx: add ring buffer for tracing debug
logs") introduced unconditional log string formatting to ql_dbg() even if
ql_dbg_log event is disabled. It harms performance because some strings are
formatted in fastpath and/or interrupt context.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 598a90f2002c ("scsi: qla2xxx: add ring buffer for tracing debug logs")
Cc: Rajan Shanmugavelu <[email protected]>
Cc: [email protected]
Signed-off-by: Roman Bolshakov <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
According to ZBC and SPC specifications, the unit of ALLOCATION LENGTH
field of REPORT ZONES command is byte. However, current scsi_debug
implementation handles it as number of zones to calculate buffer size to
report zones. When the ALLOCATION LENGTH has a large number, this results
in too large buffer size and causes memory allocation failure. Fix the
failure by handling ALLOCATION LENGTH as byte unit.
Link: https://lore.kernel.org/r/[email protected]
Fixes: f0d1cf9378bd ("scsi: scsi_debug: Add ZBC zone commands")
Reviewed-by: Damien Le Moal <[email protected]>
Signed-off-by: Shin'ichiro Kawasaki <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
When issued LUN reset under heavy I/O we hit the qedi WARN_ON because of a
mismatch in firmware I/O cmd cleanup request count and I/O cmd cleanup
response count received. The mismatch is because of a race caused by the
postfix increment of cmd_cleanup_cmpl.
[qedi_clearsq:1295]:18: fatal error, need hard reset, cid=0x0
WARNING: CPU: 48 PID: 110963 at drivers/scsi/qedi/qedi_fw.c:1296 qedi_clearsq+0xa5/0xd0 [qedi]
CPU: 48 PID: 110963 Comm: kworker/u130:0 Kdump: loaded Tainted: G W
Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 04/15/2020
Workqueue: iscsi_conn_cleanup iscsi_cleanup_conn_work_fn [scsi_transport_iscsi]
RIP: 0010:qedi_clearsq+0xa5/0xd0 [qedi]
RSP: 0018:ffffac2162c7fd98 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff975213c40ab8 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff9761bf816858 RDI: ffff9761bf816858
RBP: ffff975247018628 R08: 000000000000522c R09: 000000000000005b
R10: 0000000000000000 R11: ffffac2162c7fbd8 R12: ffff97522e1b2be8
R13: 0000000000000000 R14: ffff97522e1b2800 R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff9761bf800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f1a34e3e1a0 CR3: 0000000108bb2000 CR4: 0000000000350ee0
Call Trace:
qedi_ep_disconnect+0x533/0x550 [qedi]
? iscsi_dbg_trace+0x63/0x80 [scsi_transport_iscsi]
? _cond_resched+0x15/0x30
? iscsi_suspend_queue+0x19/0x40 [libiscsi]
iscsi_ep_disconnect+0xb0/0x130 [scsi_transport_iscsi]
iscsi_cleanup_conn_work_fn+0x82/0x130 [scsi_transport_iscsi]
process_one_work+0x1a7/0x360
? create_worker+0x1a0/0x1a0
worker_thread+0x30/0x390
? create_worker+0x1a0/0x1a0
kthread+0x116/0x130
? kthread_flush_work_fn+0x10/0x10
ret_from_fork+0x22/0x40
---[ end trace 5f1441f59082235c ]---
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Lee Duncan <[email protected]>
Reviewed-by: Mike Christie <[email protected]>
Signed-off-by: Manish Rangankar <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
When building bpf_skel with clang-10, typedef causes confusions like:
libbpf: map 'prev_readings': unexpected def kind var.
Fix this by removing the typedef.
Fixes: 7fac83aaf2eecc9e ("perf stat: Introduce 'bperf' to share hardware PMCs with BPF")
Reported-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Arnaldo reported that building all his containers with BUILD_BPF_SKEL=1
to then make this the default he found problems in some distros where
the system linux/bpf.h file was being used and lacked this:
util/bpf_skel/bperf_leader.bpf.c:13:20: error: use of undeclared identifier 'BPF_F_PRESERVE_ELEMS'
__uint(map_flags, BPF_F_PRESERVE_ELEMS);
So use instead the vmlinux.h file generated by bpftool from BTF info.
This fixed these as well, getting the build back working on debian:11,
debian:experimental and ubuntu:21.10:
In file included from In file included from util/bpf_skel/bperf_leader.bpf.cutil/bpf_skel/bpf_prog_profiler.bpf.c::33:
:
In file included from In file included from /usr/include/linux/bpf.h/usr/include/linux/bpf.h::1111:
:
/usr/include/linux/types.h/usr/include/linux/types.h::55::1010:: In file included from util/bpf_skel/bperf_follower.bpf.c:3fatal errorfatal error:
: : In file included from /usr/include/linux/bpf.h:'asm/types.h' file not found11'asm/types.h' file not found:
/usr/include/linux/types.h:5:10: fatal error: 'asm/types.h' file not found
#include <asm/types.h>#include <asm/types.h>
^~~~~~~~~~~~~ ^~~~~~~~~~~~~
#include <asm/types.h>
^~~~~~~~~~~~~
1 error generated.
Reported-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Tested-by: Athira Rajeev <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
These leaks were found with leak sanitizer running "perf pipe recording
and injection test".
In pipe mode feat_fd may hold onto an events struct that needs freeing.
When string features are processed they may overwrite an already created
string, so free this before the overwrite.
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Otherwise load counting is an average. Without this change
duration_time in test_memory_bandwidth will alter its value if an
earlier test contains duration_time.
This patch fixes an issue that's introduced in the proposed patch:
https://lore.kernel.org/lkml/[email protected]/
in perf test "Parse and process metrics".
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Clarke <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
topology info
Some platforms do not have CPU die support, for example s390.
Commit
Cc: Ian Rogers <[email protected]>
Fixes: fdf1e29b6118c18f ("perf expr: Add metric literals for topology.")
fails on s390:
# perf test -Fv 7
...
# FAILED tests/expr.c:173 #num_dies >= #num_packages
---- end ----
Simple expression parser: FAILED!
#
Investigating this issue leads to these functions:
build_cpu_topology()
+--> has_die_topology(void)
{
struct utsname uts;
if (uname(&uts) < 0)
return false;
if (strncmp(uts.machine, "x86_64", 6))
return false;
....
}
which always returns false on s390. The caller build_cpu_topology()
checks has_die_topology() return value. On false the the struct
cpu_topology::die_cpu_list is not contructed and has zero entries. This
leads to the failing comparison: #num_dies >= #num_packages. s390 of
course has a positive number of packages.
Fix this and check if the function build_cpu_topology() did build up
a die_cpus_list. The number of entries in this list should be larger
than 0. If the number of list element is zero, the die_cpus_list has
not been created and the check in function test__expr():
TEST_ASSERT_VAL("#num_dies >= #num_packages", \
num_dies >= num_packages)
always fails.
Output after:
# perf test -Fv 7
7: Simple expression parser :
--- start ---
division by zero
syntax error
---- end ----
Simple expression parser: Ok
#
Fixes: fdf1e29b6118c18f ("perf expr: Add metric literals for topology.")
Signed-off-by: Thomas Richter <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Sumanth Korikkar <[email protected]>
Cc: Sven Schnelle <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
[ Added comment in the added 'if (num_dies)' line about architectures not having die topology ]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
test-all fast path
Since 66dfdff03d196e51 ("perf tools: Add Python 3 support") we don't use
the tools/build/feature/test-libpython-version.c version in any Makefile
feature check:
$ find tools/ -type f | xargs grep feature-libpython-version
$
The only place where this was used was removed in 66dfdff03d196e51:
- ifneq ($(feature-libpython-version), 1)
- $(warning Python 3 is not yet supported; please set)
- $(warning PYTHON and/or PYTHON_CONFIG appropriately.)
- $(warning If you also have Python 2 installed, then)
- $(warning try something like:)
- $(warning $(and ,))
- $(warning $(and ,) make PYTHON=python2)
- $(warning $(and ,))
- $(warning Otherwise, disable Python support entirely:)
- $(warning $(and ,))
- $(warning $(and ,) make NO_LIBPYTHON=1)
- $(warning $(and ,))
- $(error $(and ,))
- else
- LDFLAGS += $(PYTHON_EMBED_LDFLAGS)
- EXTLIBS += $(PYTHON_EMBED_LIBADD)
- LANG_BINDINGS += $(obj-perf)python/perf.so
- $(call detected,CONFIG_LIBPYTHON)
- endif
And nowadays we either build with PYTHON=python3 or just install the
python3 devel packages and perf will build against it.
But the leftover feature-libpython-version check made the fast path
feature detection to break in all cases except when python2 devel files
were installed:
$ rpm -qa | grep python.*devel
python3-devel-3.9.7-1.fc34.x86_64
$ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf ;
$ make -C tools/perf O=/tmp/build/perf install-bin
make: Entering directory '/var/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j32' parallel build
HOSTCC /tmp/build/perf/fixdep.o
<SNIP>
$ cat /tmp/build/perf/feature/test-all.make.output
In file included from test-all.c:18:
test-libpython-version.c:5:10: error: #error
5 | #error
| ^~~~~
$ ldd ~/bin/perf | grep python
libpython3.9.so.1.0 => /lib64/libpython3.9.so.1.0 (0x00007fda6dbcf000)
$
As python3 is the norm these days, fix this by just removing the unused
feature-libpython-version feature check, making the test-all fast path
to work with the common case.
With this:
$ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf ;
$ make -C tools/perf O=/tmp/build/perf install-bin |& head
make: Entering directory '/var/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j32' parallel build
HOSTCC /tmp/build/perf/fixdep.o
HOSTLD /tmp/build/perf/fixdep-in.o
LINK /tmp/build/perf/fixdep
Auto-detecting system features:
... dwarf: [ on ]
... dwarf_getlocations: [ on ]
... glibc: [ on ]
$ ldd ~/bin/perf | grep python
libpython3.9.so.1.0 => /lib64/libpython3.9.so.1.0 (0x00007f58800b0000)
$ cat /tmp/build/perf/feature/test-all.make.output
$
Reviewed-by: James Clark <[email protected]>
Fixes: 66dfdff03d196e51 ("perf tools: Add Python 3 support")
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jaroslav Škarvada <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
sysfs__read_int() returns 0 on success, and so the fast read path was
always failing.
Fixes: bb629484d924118e ("perf tools: Simplify checking if SMT is active.")
Signed-off-by: Ian Rogers <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Konstantin Khlebnikov <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Clarke <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
futex_waitv syscall
To pick the changes in this cset:
a0eb2da92b715d0c ("futex: Wireup futex_waitv syscall")
That add support for this new syscall in tools such as 'perf trace'.
For instance, this is now possible (adapted from the x86_64 test output):
# perf trace -e futex_waitv
^C#
# perf trace -v -e futex_waitv
event qualifier tracepoint filter: (common_pid != 807333 && common_pid != 3564) && (id == 449)
^C#
# perf trace -v -e futex* --max-events 10
event qualifier tracepoint filter: (common_pid != 812168 && common_pid != 3564) && (id == 221 || id == 449)
mmap size 528384B
? ( ): Timer/219310 ... [continued]: futex()) = -1 ETIMEDOUT (Connection timed out)
0.012 ( 0.002 ms): Timer/219310 futex(uaddr: 0x7fd0b152d3c8, op: WAKE|PRIVATE_FLAG, val: 1) = 0
0.024 ( 0.060 ms): Timer/219310 futex(uaddr: 0x7fd0b152d420, op: WAIT_BITSET|PRIVATE_FLAG, utime: 0x7fd0b1657840, val3: MATCH_ANY) = 0
0.086 ( 0.001 ms): Timer/219310 futex(uaddr: 0x7fd0b152d3c8, op: WAKE|PRIVATE_FLAG, val: 1) = 0
0.088 ( ): Timer/219310 futex(uaddr: 0x7fd0b152d424, op: WAIT_BITSET|PRIVATE_FLAG, utime: 0x7fd0b1657840, val3: MATCH_ANY) ...
0.075 ( 0.005 ms): Web Content/219299 futex(uaddr: 0x7fd0b152d420, op: WAKE|PRIVATE_FLAG, val: 1) = 1
0.169 ( 0.004 ms): Web Content/219299 futex(uaddr: 0x7fd0b152d424, op: WAKE|PRIVATE_FLAG, val: 1) = 1
0.088 ( 0.089 ms): Timer/219310 ... [continued]: futex()) = 0
0.179 ( 0.001 ms): Timer/219310 futex(uaddr: 0x7fd0b152d3c8, op: WAKE|PRIVATE_FLAG, val: 1) = 0
0.181 ( ): Timer/219310 futex(uaddr: 0x7fd0b152d420, op: WAIT_BITSET|PRIVATE_FLAG, utime: 0x7fd0b1657840, val3: MATCH_ANY) ...
#
That is the filter expression attached to the raw_syscalls:sys_{enter,exit}
tracepoints.
$ grep futex tools/perf/arch/powerpc/entry/syscalls/syscall.tbl
221 32 futex sys_futex_time32
221 64 futex sys_futex
221 spu futex sys_futex
422 32 futex_time64 sys_futex sys_futex
449 common futex_waitv sys_futex_waitv
$
This addresses this perf build warnings:
Warning: Kernel ABI header at 'tools/perf/arch/powerpc/entry/syscalls/syscall.tbl' differs from latest version at 'arch/powerpc/kernel/syscalls/syscall.tbl'
diff -u tools/perf/arch/powerpc/entry/syscalls/syscall.tbl arch/powerpc/kernel/syscalls/syscall.tbl
Reviewed-by: Athira Rajeev <[email protected]>
Tested-by: Athira Rajeev <[email protected]>
Cc: Adrian Hunter <[email protected]>,
Cc: André Almeida <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/lkml/YZ%[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The space allowed for new attributes can be too small if existing header
information is large. That can happen, for example, if there are very
many CPUs, due to having an event ID per CPU per event being stored in the
header information.
Fix by adding the existing header.data_offset. Also increase the extra
space allowed to 8KiB and align to a 4KiB boundary for neatness.
Signed-off-by: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
syscall
To pick the changes in these csets:
6c122360cf2f4c5a ("s390: wire up sys_futex_waitv system call")
That add support for this new syscall in tools such as 'perf trace'.
For instance, this is now possible (adapted from the x86_64 test output):
# perf trace -e futex_waitv
^C#
# perf trace -v -e futex_waitv
event qualifier tracepoint filter: (common_pid != 807333 && common_pid != 3564) && (id == 449)
^C#
# perf trace -v -e futex* --max-events 10
event qualifier tracepoint filter: (common_pid != 812168 && common_pid != 3564) && (id == 238 || id == 449)
? ( ): Timer/219310 ... [continued]: futex()) = -1 ETIMEDOUT (Connection timed out)
0.012 ( 0.002 ms): Timer/219310 futex(uaddr: 0x7fd0b152d3c8, op: WAKE|PRIVATE_FLAG, val: 1) = 0
0.024 ( 0.060 ms): Timer/219310 futex(uaddr: 0x7fd0b152d420, op: WAIT_BITSET|PRIVATE_FLAG, utime: 0x7fd0b1657840, val3: MATCH_ANY) = 0
0.086 ( 0.001 ms): Timer/219310 futex(uaddr: 0x7fd0b152d3c8, op: WAKE|PRIVATE_FLAG, val: 1) = 0
0.088 ( ): Timer/219310 futex(uaddr: 0x7fd0b152d424, op: WAIT_BITSET|PRIVATE_FLAG, utime: 0x7fd0b1657840, val3: MATCH_ANY) ...
0.075 ( 0.005 ms): Web Content/219299 futex(uaddr: 0x7fd0b152d420, op: WAKE|PRIVATE_FLAG, val: 1) = 1
0.169 ( 0.004 ms): Web Content/219299 futex(uaddr: 0x7fd0b152d424, op: WAKE|PRIVATE_FLAG, val: 1) = 1
0.088 ( 0.089 ms): Timer/219310 ... [continued]: futex()) = 0
0.179 ( 0.001 ms): Timer/219310 futex(uaddr: 0x7fd0b152d3c8, op: WAKE|PRIVATE_FLAG, val: 1) = 0
0.181 ( ): Timer/219310 futex(uaddr: 0x7fd0b152d420, op: WAIT_BITSET|PRIVATE_FLAG, utime: 0x7fd0b1657840, val3: MATCH_ANY) ...
#
That is the filter expression attached to the raw_syscalls:sys_{enter,exit}
tracepoints.
$ grep futex tools/perf/arch/s390/entry/syscalls/syscall.tbl
238 common futex sys_futex sys_futex_time32
422 32 futex_time64 - sys_futex
449 common futex_waitv sys_futex_waitv sys_futex_waitv
$
This addresses this perf build warnings:
Warning: Kernel ABI header at 'tools/perf/arch/s390/entry/syscalls/syscall.tbl' differs from latest version at 'arch/s390/kernel/syscalls/syscall.tbl'
diff -u tools/perf/arch/s390/entry/syscalls/syscall.tbl arch/s390/kernel/syscalls/syscall.tbl
Acked-by: Heiko Carstens <[email protected]>
Cc: Adrian Hunter <[email protected]>,
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Link: https://lore.kernel.org/lkml/YZ%2F2qRW%[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This: This reverts commit 92723ea0f11d92496687db8c9725248e9d1e5e1d.
# perf test 91
91: perf stat --bpf-counters test :RRRRRRRRRRRRR FAILED!
# perf test 91
91: perf stat --bpf-counters test :RRRRRRRRRRRRR FAILED!
# perf test 91
91: perf stat --bpf-counters test :RRRRRRRRRRRR FAILED!
# perf test 91
91: perf stat --bpf-counters test :RRRRRRRRRRRRRRRRRR Ok
# perf test 91
91: perf stat --bpf-counters test :RRRRRRRRR FAILED!
# perf test 91
91: perf stat --bpf-counters test :RRRRRRRRRRR Ok
# perf test 91
91: perf stat --bpf-counters test :RRRRRRRRRRRRRRR Ok
yep, it seems the perf bench is broken so the counts won't correlated if
I revert this one:
92723ea0f11d perf bench: Fix two memory leaks detected with ASan
it works for me again.. it seems to break -t option
[root@dell-r440-01 perf]# ./perf bench sched messaging -g 1 -l 100 -t
# Running 'sched/messaging' benchmark:
RRRperf: CLIENT: ready write: Bad file descriptor
Rperf: SENDER: write: Bad file descriptor
Reported-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Sohaib Mohamed <[email protected]>
Cc: Song Liu <[email protected]>
Link: https://lore.kernel.org/lkml/YZev7KClb%2Fud43Lc@krava/
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
While preparing my patch series adding netns refcount tracking,
I spotted bugs in devlink_nl_cmd_reload()
Some error paths forgot to release a refcount on a netns.
To fix this, we can reduce the scope of get_net()/put_net()
section around the call to devlink_reload().
Fixes: ccdf07219da6 ("devlink: Add reload action option to devlink reload command")
Fixes: dc64cc7c6310 ("devlink: Add devlink reload limit option")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Moshe Shemesh <[email protected]>
Cc: Jacob Keller <[email protected]>
Cc: Jiri Pirko <[email protected]>
Reviewed-by: Leon Romanovsky <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
There is a short period between a net device starts to be unregistered
and when it is actually gone. In that time frame ethtool operations
could still be performed, which might end up in unwanted or undefined
behaviours[1].
Do not allow ethtool operations after a net device starts its
unregistration. This patch targets the netlink part as the ioctl one
isn't affected: the reference to the net device is taken and the
operation is executed within an rtnl lock section and the net device
won't be found after unregister.
[1] For example adding Tx queues after unregister ends up in NULL
pointer exceptions and UaFs, such as:
BUG: KASAN: use-after-free in kobject_get+0x14/0x90
Read of size 1 at addr ffff88801961248c by task ethtool/755
CPU: 0 PID: 755 Comm: ethtool Not tainted 5.15.0-rc6+ #778
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-4.fc34 04/014
Call Trace:
dump_stack_lvl+0x57/0x72
print_address_description.constprop.0+0x1f/0x140
kasan_report.cold+0x7f/0x11b
kobject_get+0x14/0x90
kobject_add_internal+0x3d1/0x450
kobject_init_and_add+0xba/0xf0
netdev_queue_update_kobjects+0xcf/0x200
netif_set_real_num_tx_queues+0xb4/0x310
veth_set_channels+0x1c3/0x550
ethnl_set_channels+0x524/0x610
Fixes: 041b1c5d4a53 ("ethtool: helper functions for netlink interface")
Suggested-by: Jakub Kicinski <[email protected]>
Signed-off-by: Antoine Tenart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Andreas reported that a specific build environment for an external
module, being a bit broken, does pass CC_IMPLICIT_FALLTHROUGH quoted as
argument to gcc, causing an error
gcc-11: error: "-Wimplicit-fallthrough=5": linker input file not found: No such file or directory
Until this is more generally fixed as outlined in [1], by fixing
scripts/link-vmlinux.sh, scripts/gen_autoksyms.sh, etc to not directly
include the include/config/auto.conf, and in a second step, change
Kconfig to generate the auto.conf without "", workaround the issue by
explicitly unquoting CC_IMPLICIT_FALLTHROUGH.
Reported-by: Andreas Beckmann <[email protected]>
Link: https://bugs.debian.org/1001083
Link: https://lore.kernel.org/linux-kbuild/CAK7LNAR-VXwHFEJqCcrFDZj+_4+Xd6oynbj_0eS8N504_ydmyw@mail.gmail.com/ [1]
Signed-off-by: Salvatore Bonaccorso <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Reviewed-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Without this change eMMC runs at overclocked freq.
Swap the ops to not OC the eMMC.
Signed-off-by: Martin Botka <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Bjorn Andersson <[email protected]>
Fixes: 4b8d6ae57cdf ("clk: qcom: Add SM6125 (TRINKET) GCC driver")
Signed-off-by: Stephen Boyd <[email protected]>
|
|
Similar to other systems Surface Go 3 requires a DMI quirk to enable
5 button array for power and volume buttons.
Buglink: https://github.com/linux-surface/linux-surface/issues/595
Cc: [email protected]
Signed-off-by: Alex Hung <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Hans de Goede <[email protected]>
|
|
Use the ti,watchdog-timeout-ms property instead of the unsupported
ti,watchdog-timer property to make the example validate correctly.
Signed-off-by: Thierry Reding <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring <[email protected]>
|
|
The "interrupts" property in the example looks weird:
- The type is not in the last cell,
- Level interrupts don't work well with gpio-keys, as they keep the
interrupt asserted as long as the key is pressed, causing an
interrupt storm.
Use a more realistic falling-edge interrupt instead.
Signed-off-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/r/47ecd2d8efcf09f8ab47de87a7bcfafc82208776.1638538079.git.geert+renesas@glider.be
Signed-off-by: Rob Herring <[email protected]>
|
|
This binding was already documented in phy.txt, commit 252ae5330daa
("Documentation: devicetree: Add PHY no lane swap binding"), but got
accidently removed during YAML conversion in commit d8704342c109
("dt-bindings: net: Add a YAML schemas for the generic PHY options").
Note: 'enet-phy-lane-no-swap' and the absence of 'enet-phy-lane-swap' are
not identical, as the former one disable this feature, while the latter
one doesn't change anything.
Fixes: d8704342c109 ("dt-bindings: net: Add a YAML schemas for the generic PHY options")
Signed-off-by: Alexander Stein <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring <[email protected]>
|
|
Pull documentation fixes from Jonathan Corbet:
"A few important documentation fixes, including breakage that comes
with v1.0 of the ReadTheDocs theme"
* tag 'docs-5.16-3' of git://git.lwn.net/linux:
Documentation: Add minimum pahole version
Documentation/process: fix self reference
docs: admin-guide/blockdev: Remove digraph of node-states
docs: conf.py: fix support for Readthedocs v 1.0.0
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fix from Mark Brown:
"Just one trivial update adding a device ID to the DT bindings"
* tag 'spi-fix-v5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-rockchip: Add rk3568-spi compatible
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"Documentation fix for v5.17.
A fix for bitrot in the documentation for protection interrupts that
crept in as the code was revised during review"
* tag 'regulator-fix-v5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: Update protection IRQ helper docs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fix from Ard Biesheuvel:
"Ensure that the EFI memory map resides in encrypted memory even after
it has been reallocated"
* tag 'efi-urgent-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
x86/sme: Explicitly map new EFI memmap table as encrypted
|
|
There's a small race here where the task_work could finish and drop
the worker itself, so that by the time that task_work_add() returns
with a successful addition we've already put the worker.
The worker callbacks clear this bit themselves, so we don't actually
need to manually clear it in the caller. Get rid of it.
Reported-by: [email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Currently, NOMMU pull km allocator via !SMP dependency because most of
them are UP, yet for SMP+NOMMU vm allocator gets pulled which:
* may lead to broken build [1]
* ...or not working runtime due to [2]
It looks like SMP+NOMMU case was overlooked in bbddff054587 ("percpu:
use percpu allocator on UP too") so restore that.
[1]
For ARM SMP+NOMMU (R-class cores)
arm-none-linux-gnueabihf-ld: mm/percpu.o: in function `pcpu_post_unmap_tlb_flush':
mm/percpu-vm.c:188: undefined reference to `flush_tlb_kernel_range'
[2]
static inline
int vmap_pages_range_noflush(unsigned long addr, unsigned long end,
pgprot_t prot, struct page **pages, unsigned int page_shift)
{
return -EINVAL;
}
Signed-off-by: Vladimir Murzin <[email protected]>
Tested-by: Rob Landley <[email protected]>
Tested-by: Rich Felker <[email protected]>
[Dennis: use depends instead of default for condition]
Signed-off-by: Dennis Zhou <[email protected]>
|
|
When trying to dump VFs VSI RX/TX descriptors
using debugfs there was a crash
due to NULL pointer dereference in i40e_dbg_dump_desc.
Added a check to i40e_dbg_dump_desc that checks if
VSI type is correct for dumping RX/TX descriptors.
Fixes: 02e9c290814c ("i40e: debugfs interface")
Signed-off-by: Sylwester Dziedziuch <[email protected]>
Signed-off-by: Norbert Zulinski <[email protected]>
Signed-off-by: Mateusz Palczewski <[email protected]>
Tested-by: Gurucharan G <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
After setting pre-set combined to 16 queues and reserving 16 queues by
tc qdisc, pre-set maximum combined queues returned to default value
after VF reset being 4 and this generated errors during removing tc.
Fixed by removing clear num_req_queues before reset VF.
Fixes: e284fc280473 (i40e: Add and delete cloud filter)
Signed-off-by: Grzegorz Szczurek <[email protected]>
Signed-off-by: Mateusz Palczewski <[email protected]>
Tested-by: Bindushree P <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Fix failed operation code appearing if handling messages from VF.
Implemented by waiting for VF appropriate state if request starts
handle while VF reset.
Without this patch the message handling request while VF is in
a reset state ends with error -5 (I40E_ERR_PARAM).
Fixes: 5c3c48ac6bf5 ("i40e: implement virtual device interface")
Signed-off-by: Grzegorz Szczurek <[email protected]>
Signed-off-by: Karen Sornek <[email protected]>
Tested-by: Tony Brelinski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
mtdblock / mtdblock_ro set part_bits to 0 and thus nevever scanned
partitions. Restore that behavior by setting the GENHD_FL_NO_PART flag.
Fixes: 1ebe2e5f9d68e94c ("block: remove GENHD_FL_EXT_DEVT")
Reported-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Tested-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
iavf_set_ringparams doesn't communicate to the user that
1. The user requested descriptor count is out of range. Instead it
just quietly sets descriptors to the "clamped" value and calls it
done. This makes it look an invalid value was successfully set as
the descriptor count when this isn't actually true.
2. The user provided descriptor count needs to be inflated for alignment
reasons.
This behavior is confusing. The ice driver has already addressed this
by rejecting invalid values for descriptor count and
messaging for alignment adjustments.
Do the same thing here by adding the error and info messages.
Fixes: fbb7ddfef253 ("i40evf: core ethtool functionality")
Signed-off-by: Anirudh Venkataramanan <[email protected]>
Signed-off-by: Michal Maloszewski <[email protected]>
Tested-by: Konrad Jankowski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.16
A relatively large collection of updates, the size is increased quite a
bit by there being some repetitive changes for similar issues that occur
multiple times with both notifying control value changes and runtime PM.
The Rockchip update looks at first glance like a cleanup but fixes
instantiation of the hardware on some systems.
|
|
Olivia Mackintosh has posted to alsa-devel reporting that
there's a potential bug that could break mixer quirks for Pioneer
devices introduced by 6d27788160362a7ee6c0d317636fe4b1ddbe59a7
"ALSA: usb-audio: Add support for the Pioneer DJM 750MK2
Mixer/Soundcard".
This happened because the DJM 750 MK2 was added last to the Pioneer DJM
device table index and defined as 0x4 but was added to snd_djm_devices[]
just after the DJM 750 (MK1) entry instead of last, after the DJM 900
NXS2. This escaped review.
To prevent that from ever happening again, Takashi Iwai suggested to use
C99 array designators in snd_djm_devices[] instead of simply reordering
the entries.
Fixes: 6d2778816036 ("ALSA: usb-audio: Add support for the Pioneer DJM 750MK2")
Reported-by: Olivia Mackintosh <[email protected]>
Suggested-by: Takashi Iwai <[email protected]>
Signed-off-by: Geraldo Nascimento <[email protected]>
Link: https://lore.kernel.org/r/Yau46FDzoql0SNnW@geday
Signed-off-by: Takashi Iwai <[email protected]>
|
|
The write pointer in NVMe ZNS is invalid for a zone in zone state full.
The same also holds true for ZAC/ZBC.
The current behavior for NVMe is to simply propagate the wp reported by
the drive, even for full zones. Since the wp is invalid for a full zone,
the wp reported by the drive may be any value.
The way that the sd_zbc driver handles a full zone is to always report
the wp as zone start + zone len, regardless of what the drive reported.
null_blk also follows this convention.
Do the same for NVMe, so that a BLKREPORTZONE ioctl reports the write
pointer for a full zone in a consistent way, regardless of the interface
of the underlying zoned block device.
blkzone report before patch:
start: 0x000040000, len 0x040000, cap 0x03e000, wptr 0xfffffffffffbfff8
reset:0 non-seq:0, zcond:14(fu) [type: 2(SEQ_WRITE_REQUIRED)]
blkzone report after patch:
start: 0x000040000, len 0x040000, cap 0x03e000, wptr 0x040000 reset:0
non-seq:0, zcond:14(fu) [type: 2(SEQ_WRITE_REQUIRED)]
Signed-off-by: Niklas Cassel <[email protected]>
Reviewed-by: Keith Busch <[email protected]>
Reviewed-by: Damien Le Moal <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
|
|
The only fabrics target that supports metadata handling through the
separate integrity buffer is RDMA. It is currently usable only if the
size is 8B per block and formatted for protection information. If an
rdma target were to export a namespace with a different format (ex:
4k+64B), the driver will not be able to submit valid read/write commands
for that namespace.
Suppress setting the metadata feature in the namespace so that the
gendisk capacity will be set to 0. This will prevent read/write access
through the block stack, but will continue to allow ioctl passthrough
commands.
Cc: Max Gurtovoy <[email protected]>
Cc: Sagi Grimberg <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
|
|
The driver assigned nvme handle isn't persistent across reboots, so is
not enough information to match up where the collisions are occuring.
Add the subsys nqn string to the output so that it can more easily be
identified later.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215099
Signed-off-by: Keith Busch <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
|
|
Most of the blk-ctrl reset bits are found in one register, however
there are two bits in offset 8 for pulling the MIPI DPHY out of reset
and one of them needs to be set when IMX8MM_DISPBLK_PD_MIPI_CSI is brought
out of reset or the MIPI_CSI hangs.
Since MIPI_DSI is impacted, add the additional one for MIPI_DSI too.
Fixes: 926e57c065df ("soc: imx: imx8m-blk-ctrl: add DISP blk-ctrl")
Signed-off-by: Adam Ford <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
Reviewed-by: Lucas Stach <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Tested by: Tim Harvey <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
According to the i.MX6ULL Reference Manual, pad CSI_DATA07 may
have the ESAI_TX0 functionality, not ESAI_T0.
Also, NXP's i.MX Config Tools 10.0 generates dtsi with the
MX6ULL_PAD_CSI_DATA07__ESAI_TX0 naming, so fix it accordingly.
There are no devicetree users in mainline that use the old name,
so just remove the old entry.
Fixes: c201369d4aa5 ("ARM: dts: imx6ull: add imx6ull support")
Reported-by: George Makarov <[email protected]>
Signed-off-by: Fabio Estevam <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
The mxsfb driver handling imx8mq lcdif doesn't yet request the
interconnect bandwidth that's needed at runtime when the description is
present in the DT node.
So remove that description and bring it back when it's supported.
Fixes: ad1abc8a03fd ("arm64: dts: imx8mq: Add interconnect for lcdif")
Signed-off-by: Martin Kepplinger <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
ATA IDENTIFY command returns an array of le16 words. Accessing it as a
u16 array triggers the following sparse warning:
drivers/ata/ahci_ceva.c:107:33: warning: invalid assignment: &=
drivers/ata/ahci_ceva.c:107:33: left side has type unsigned short
drivers/ata/ahci_ceva.c:107:33: right side has type restricted __le16
Use a local variable to explicitly cast the id array to __le16 to avoid
this warning.
Signed-off-by: Damien Le Moal <[email protected]>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
"Some bug and warning fixes:
- Fix "make install" to use debians "installkernel" script which is
now in /usr/sbin
- Fix the bindeb-pkg make target by giving the correct KBUILD_IMAGE
file name
- Fix compiler warnings by annotating parisc agp init functions with
__init
- Fix timekeeping on SMP machines with dual-core CPUs
- Enable some more config options in the 64-bit defconfig"
* tag 'for-5.16/parisc-6' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Mark cr16 CPU clocksource unstable on all SMP machines
parisc: Fix "make install" on newer debian releases
parisc/agp: Annotate parisc agp init functions with __init
parisc: Enable sata sil, audit and usb support on 64-bit defconfig
parisc: Fix KBUILD_IMAGE for self-extracting kernel
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for a few reported issues. Included in
here are:
- xhci fix for a _much_ reported regression. I don't think there's a
community distro that has not reported this problem yet :(
- new USB quirk addition
- cdns3 minor fixes
- typec regression fix.
All of these have been in linux-next with no reported problems, and
the xhci fix has been reported by many to resolve their reported
problem"
* tag 'usb-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: cdnsp: Fix a NULL pointer dereference in cdnsp_endpoint_init()
usb: cdns3: gadget: fix new urb never complete if ep cancel previous requests
usb: typec: tcpm: Wait in SNK_DEBOUNCED until disconnect
USB: NO_LPM quirk Lenovo Powered USB-C Travel Hub
xhci: Fix commad ring abort, write all 64 bits to CRCR register.
|