aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-12-14mac80211: send ADDBA requests using the tid/queue of the aggregation sessionFelix Fietkau1-1/+1
Sending them out on a different queue can cause a race condition where a number of packets in the queue may be discarded by the receiver, because the ADDBA request is sent too early. This affects any driver with software A-MPDU setup which does not allocate packet seqno in hardware on tx, regardless of whether iTXQ is used or not. The only driver I've seen that explicitly deals with this issue internally is mwl8k. Cc: [email protected] Signed-off-by: Felix Fietkau <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2021-12-14drm/i915/display: Fix an unsigned subtraction which can never be negative.Harshit Mogalapalli1-1/+1
smatch warning: drivers/gpu/drm/i915/display/intel_dmc.c:601 parse_dmc_fw() warn: unsigned 'fw->size - offset' is never less than zero Firmware size is size_t and offset is u32. So the subtraction is unsigned which can never be less than zero. Fixes: 3d5928a168a9 ("drm/i915/xelpd: Pipe A DMC plugging") Signed-off-by: Harshit Mogalapalli <[email protected]> Reviewed-by: Lucas De Marchi <[email protected]> Signed-off-by: Lucas De Marchi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 87bb2a410dcfb617b88e4695edf4beb6336dc314) Signed-off-by: Rodrigo Vivi <[email protected]>
2021-12-14USB: serial: option: add Telit FN990 compositionsDaniele Palmas1-0/+8
Add the following Telit FN990 compositions: 0x1070: tty, adb, rmnet, tty, tty, tty, tty 0x1071: tty, adb, mbim, tty, tty, tty, tty 0x1072: rndis, tty, adb, tty, tty, tty, tty 0x1073: tty, adb, ecm, tty, tty, tty, tty Signed-off-by: Daniele Palmas <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]>
2021-12-14USB: serial: cp210x: fix CP2105 GPIO registrationJohan Hovold1-2/+4
When generalising GPIO support and adding support for CP2102N, the GPIO registration for some CP2105 devices accidentally broke. Specifically, when all the pins of a port are in "modem" mode, and thus unavailable for GPIO use, the GPIO chip would now be registered without having initialised the number of GPIO lines. This would in turn be rejected by gpiolib and some errors messages would be printed (but importantly probe would still succeed). Fix this by initialising the number of GPIO lines before registering the GPIO chip. Note that as for the other device types, and as when all CP2105 pins are muxed for LED function, the GPIO chip is registered also when no pins are available for GPIO use. Reported-by: Maarten Brock <[email protected]> Link: https://lore.kernel.org/r/[email protected] Fixes: c8acfe0aadbe ("USB: serial: cp210x: implement GPIO support for CP2102N") Cc: [email protected] # 4.19 Cc: Karoly Pados <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Greg Kroah-Hartman <[email protected]> Tested-by: Maarten Brock <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2021-12-14drm/ast: potential dereference of null pointerJiasheng Jiang1-1/+4
The return value of kzalloc() needs to be checked. To avoid use of null pointer '&ast_state->base' in case of the failure of alloc. Fixes: f0adbc382b8b ("drm/ast: Allocate initial CRTC state of the correct size") Signed-off-by: Jiasheng Jiang <[email protected]> Signed-off-by: Thomas Zimmermann <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2021-12-13scsi: pm8001: Fix phys_to_virt() usage on dma_addr_tJohn Garry1-17/+21
The driver supports a "direct" mode of operation, where the SMP req frame is directly copied into the command payload (and vice-versa for the SMP resp). To get at the SMP req frame data in the scatterlist the driver uses phys_to_virt() on the DMA mapped memory dma_addr_t . This is broken, and subsequently crashes as follows when an IOMMU is enabled: Unable to handle kernel paging request at virtual address ffff0000fcebfb00 ... pc : pm80xx_chip_smp_req+0x2d0/0x3d0 lr : pm80xx_chip_smp_req+0xac/0x3d0 pm80xx_chip_smp_req+0x2d0/0x3d0 pm8001_task_exec.constprop.0+0x368/0x520 pm8001_queue_command+0x1c/0x30 smp_execute_task_sg+0xdc/0x204 sas_discover_expander.part.0+0xac/0x6cc sas_discover_root_expander+0x8c/0x150 sas_discover_domain+0x3ac/0x6a0 process_one_work+0x1d0/0x354 worker_thread+0x13c/0x470 kthread+0x17c/0x190 ret_from_fork+0x10/0x20 Code: 371806e1 910006d6 6b16033f 54000249 (38766b05) ---[ end trace b91d59aaee98ea2d ]--- note: kworker/u192:0[7] exited with preempt_count 1 Instead use kmap_atomic(). -- Difference to v1: - use kmap_atomic() in both locations Difference to v2: - add whitespace around arithmetic (Damien) Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Damien Le Moal <[email protected]> Signed-off-by: John Garry <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2021-12-13mptcp: never allow the PM to close a listener subflowPaolo Abeni1-0/+3
Currently, when deleting an endpoint the netlink PM treverses all the local MPTCP sockets, regardless of their status. If an MPTCP listener socket is bound to the IP matching the delete endpoint, the listener TCP socket will be closed. That is unexpected, the PM should only affect data subflows. Additionally, syzbot was able to trigger a NULL ptr dereference due to the above: general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] CPU: 1 PID: 6550 Comm: syz-executor122 Not tainted 5.16.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__lock_acquire+0xd7d/0x54a0 kernel/locking/lockdep.c:4897 Code: 0f 0e 41 be 01 00 00 00 0f 86 c8 00 00 00 89 05 69 cc 0f 0e e9 bd 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 da 48 c1 ea 03 <80> 3c 02 00 0f 85 f3 2f 00 00 48 81 3b 20 75 17 8f 0f 84 52 f3 ff RSP: 0018:ffffc90001f2f818 EFLAGS: 00010016 RAX: dffffc0000000000 RBX: 0000000000000018 RCX: 0000000000000000 RDX: 0000000000000003 RSI: 0000000000000000 RDI: 0000000000000001 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000000 R11: 000000000000000a R12: 0000000000000000 R13: ffff88801b98d700 R14: 0000000000000000 R15: 0000000000000001 FS: 00007f177cd3d700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f177cd1b268 CR3: 000000001dd55000 CR4: 0000000000350ee0 Call Trace: <TASK> lock_acquire kernel/locking/lockdep.c:5637 [inline] lock_acquire+0x1ab/0x510 kernel/locking/lockdep.c:5602 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x39/0x50 kernel/locking/spinlock.c:162 finish_wait+0xc0/0x270 kernel/sched/wait.c:400 inet_csk_wait_for_connect net/ipv4/inet_connection_sock.c:464 [inline] inet_csk_accept+0x7de/0x9d0 net/ipv4/inet_connection_sock.c:497 mptcp_accept+0xe5/0x500 net/mptcp/protocol.c:2865 inet_accept+0xe4/0x7b0 net/ipv4/af_inet.c:739 mptcp_stream_accept+0x2e7/0x10e0 net/mptcp/protocol.c:3345 do_accept+0x382/0x510 net/socket.c:1773 __sys_accept4_file+0x7e/0xe0 net/socket.c:1816 __sys_accept4+0xb0/0x100 net/socket.c:1846 __do_sys_accept net/socket.c:1864 [inline] __se_sys_accept net/socket.c:1861 [inline] __x64_sys_accept+0x71/0xb0 net/socket.c:1861 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f177cd8b8e9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 b1 14 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f177cd3d308 EFLAGS: 00000246 ORIG_RAX: 000000000000002b RAX: ffffffffffffffda RBX: 00007f177ce13408 RCX: 00007f177cd8b8e9 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 00007f177ce13400 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f177ce1340c R13: 00007f177cde1004 R14: 6d705f706374706d R15: 0000000000022000 </TASK> Fix the issue explicitly skipping MPTCP socket in TCP_LISTEN status. Reported-and-tested-by: [email protected] Reviewed-by: Mat Martineau <[email protected]> Fixes: 740d798e8767 ("mptcp: remove id 0 address") Signed-off-by: Paolo Abeni <[email protected]> Link: https://lore.kernel.org/r/ebc7594cdd420d241fb2172ddb8542ba64717657.1639238695.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <[email protected]>
2021-12-13Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds6-8/+11
Pull virtio fixes from Michael Tsirkin: "Misc virtio and vdpa bugfixes" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vdpa: Consider device id larger than 31 virtio/vsock: fix the transport to work with VMADDR_CID_ANY virtio_ring: Fix querying of maximum DMA mapping size for virtio device virtio: always enter drivers/virtio/ vduse: check that offset is within bounds in get_config() vdpa: check that offsets are within bounds vduse: fix memory corruption in vduse_dev_ioctl()
2021-12-13PCI: mt7621: Convert driver into 'bool'Sergio Paracuellos1-2/+2
The driver is not ready yet to be compiled as a module since it depends on some symbols not exported on MIPS. We have the following current problems: Building mips:allmodconfig ... failed -------------- Error log: ERROR: modpost: missing MODULE_LICENSE() in drivers/pci/controller/pcie-mt7621.o ERROR: modpost: "mips_cm_unlock_other" [drivers/pci/controller/pcie-mt7621.ko] undefined! ERROR: modpost: "mips_cpc_base" [drivers/pci/controller/pcie-mt7621.ko] undefined! ERROR: modpost: "mips_cm_lock_other" [drivers/pci/controller/pcie-mt7621.ko] undefined! ERROR: modpost: "mips_cm_is64" [drivers/pci/controller/pcie-mt7621.ko] undefined! ERROR: modpost: "mips_gcr_base" [drivers/pci/controller/pcie-mt7621.ko] undefined! Temporarily move from 'tristate' to 'bool' until a better solution is ready. Also RALINK is redundant because SOC_MT7621 already depends on it. Hence, simplify condition. Fixes: 2bdd5238e756 ("PCI: mt7621: Add MediaTek MT7621 PCIe host controller driver"). Signed-off-by: Sergio Paracuellos <[email protected]> Reviewed-and-Tested-by: Guenter Roeck <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2021-12-13fget: clarify and improve __fget_files() implementationLinus Torvalds1-16/+56
Commit 054aa8d439b9 ("fget: check that the fd still exists after getting a ref to it") fixed a race with getting a reference to a file just as it was being closed. It was a fairly minimal patch, and I didn't think re-checking the file pointer lookup would be a measurable overhead, since it was all right there and cached. But I was wrong, as pointed out by the kernel test robot. The 'poll2' case of the will-it-scale.per_thread_ops benchmark regressed quite noticeably. Admittedly it seems to be a very artificial test: doing "poll()" system calls on regular files in a very tight loop in multiple threads. That means that basically all the time is spent just looking up file descriptors without ever doing anything useful with them (not that doing 'poll()' on a regular file is useful to begin with). And as a result it shows the extra "re-check fd" cost as a sore thumb. Happily, the regression is fixable by just writing the code to loook up the fd to be better and clearer. There's still a cost to verify the file pointer, but now it's basically in the noise even for that benchmark that does nothing else - and the code is more understandable and has better comments too. [ Side note: this patch is also a classic case of one that looks very messy with the default greedy Myers diff - it's much more legible with either the patience of histogram diff algorithm ] Link: https://lore.kernel.org/lkml/20211210053743.GA36420@xsang-OptiPlex-9020/ Link: https://lore.kernel.org/lkml/[email protected]/ Reported-by: kernel test robot <[email protected]> Tested-by: Carel Si <[email protected]> Cc: Jann Horn <[email protected]> Cc: Miklos Szeredi <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2021-12-13iavf: do not override the adapter state in the watchdog task (again)Stefan Assmann1-1/+0
The watchdog task incorrectly changes the state to __IAVF_RESETTING, instead of letting the reset task take care of that. This was already resolved by commit 22c8fd71d3a5 ("iavf: do not override the adapter state in the watchdog task") but the problem was reintroduced by the recent code refactoring in commit 45eebd62999d ("iavf: Refactor iavf state machine tracking"). Fixes: 45eebd62999d ("iavf: Refactor iavf state machine tracking") Signed-off-by: Stefan Assmann <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-12-13iavf: missing unlocks in iavf_watchdog_task()Dan Carpenter1-2/+2
This code was re-organized and there some unlocks missing now. Fixes: 898ef1cb1cb2 ("iavf: Combine init and watchdog state machines") Signed-off-by: Dan Carpenter <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-12-13io-wq: drop wqe lock before creating new workerJens Axboe1-0/+2
We have two io-wq creation paths: - On queue enqueue - When a worker goes to sleep The latter invokes worker creation with the wqe->lock held, but that can run into problems if we end up exiting and need to cancel the queued work. syzbot caught this: ============================================ WARNING: possible recursive locking detected 5.16.0-rc4-syzkaller #0 Not tainted -------------------------------------------- iou-wrk-6468/6471 is trying to acquire lock: ffff88801aa98018 (&wqe->lock){+.+.}-{2:2}, at: io_worker_cancel_cb+0xb7/0x210 fs/io-wq.c:187 but task is already holding lock: ffff88801aa98018 (&wqe->lock){+.+.}-{2:2}, at: io_wq_worker_sleeping+0xb6/0x140 fs/io-wq.c:700 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&wqe->lock); lock(&wqe->lock); *** DEADLOCK *** May be due to missing lock nesting notation 1 lock held by iou-wrk-6468/6471: #0: ffff88801aa98018 (&wqe->lock){+.+.}-{2:2}, at: io_wq_worker_sleeping+0xb6/0x140 fs/io-wq.c:700 stack backtrace: CPU: 1 PID: 6471 Comm: iou-wrk-6468 Not tainted 5.16.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1dc/0x2d8 lib/dump_stack.c:106 print_deadlock_bug kernel/locking/lockdep.c:2956 [inline] check_deadlock kernel/locking/lockdep.c:2999 [inline] validate_chain+0x5984/0x8240 kernel/locking/lockdep.c:3788 __lock_acquire+0x1382/0x2b00 kernel/locking/lockdep.c:5027 lock_acquire+0x19f/0x4d0 kernel/locking/lockdep.c:5637 __raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline] _raw_spin_lock+0x2a/0x40 kernel/locking/spinlock.c:154 io_worker_cancel_cb+0xb7/0x210 fs/io-wq.c:187 io_wq_cancel_tw_create fs/io-wq.c:1220 [inline] io_queue_worker_create+0x3cf/0x4c0 fs/io-wq.c:372 io_wq_worker_sleeping+0xbe/0x140 fs/io-wq.c:701 sched_submit_work kernel/sched/core.c:6295 [inline] schedule+0x67/0x1f0 kernel/sched/core.c:6323 schedule_timeout+0xac/0x300 kernel/time/timer.c:1857 wait_woken+0xca/0x1b0 kernel/sched/wait.c:460 unix_msg_wait_data net/unix/unix_bpf.c:32 [inline] unix_bpf_recvmsg+0x7f9/0xe20 net/unix/unix_bpf.c:77 unix_stream_recvmsg+0x214/0x2c0 net/unix/af_unix.c:2832 sock_recvmsg_nosec net/socket.c:944 [inline] sock_recvmsg net/socket.c:962 [inline] sock_read_iter+0x3a7/0x4d0 net/socket.c:1035 call_read_iter include/linux/fs.h:2156 [inline] io_iter_do_read fs/io_uring.c:3501 [inline] io_read fs/io_uring.c:3558 [inline] io_issue_sqe+0x144c/0x9590 fs/io_uring.c:6671 io_wq_submit_work+0x2d8/0x790 fs/io_uring.c:6836 io_worker_handle_work+0x808/0xdd0 fs/io-wq.c:574 io_wqe_worker+0x395/0x870 fs/io-wq.c:630 ret_from_fork+0x1f/0x30 We can safely drop the lock before doing work creation, making the two contexts the same in that regard. Reported-by: [email protected] Fixes: 71a85387546e ("io-wq: check for wq exit after adding new worker task_work") Signed-off-by: Jens Axboe <[email protected]>
2021-12-13net: stmmac: Add GFP_DMA32 for rx buffers if no 64 capabilityDavid Wu1-4/+12
Use page_pool_alloc_pages instead of page_pool_dev_alloc_pages, which can give the gfp parameter, in the case of not supporting 64-bit width, using 32-bit address memory can reduce a copy from swiotlb. Signed-off-by: David Wu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-12-13net: phy: add a note about refcountingRussell King (Oracle)1-0/+3
Recently, a patch has been submitted to "fix" the refcounting for a DT node in of_mdiobus_link_mdiodev(). This is not a leaked refcount. The refcount is passed to the new device. Sadly, coccicheck identifies this location as a leaked refcount, which means we're likely to keep getting patches to "fix" this. However, fixing this will cause breakage. Add a comment to state that the lack of of_node_put() here is intentional. Signed-off-by: Russell King (Oracle) <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-12-13net: ethernet: ti: add missing of_node_put before returnWang Qing1-9/+20
Fix following coccicheck warning: WARNING: Function "for_each_child_of_node" should have of_node_put() before return. Early exits from for_each_child_of_node should decrement the node reference counter. Signed-off-by: Wang Qing <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-12-13selftest/net/forwarding: declare NETIFS p9 p10Hangbin Liu1-0/+2
The recent GRE selftests defined NUM_NETIFS=10. If the users copy forwarding.config.sample to forwarding.config directly, they will get error "Command line is not complete" when run the GRE tests, because create_netif_veth() failed with no interface name defined. Fix it by extending the NETIFS with p9 and p10. Fixes: 2800f2485417 ("selftests: forwarding: Test multipath hashing on inner IP pkts for GRE tunnel") Signed-off-by: Hangbin Liu <[email protected]> Reviewed-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-12-13net: dsa: mv88e6xxx: Unforce speed & duplex in mac_link_down()Marek Behún1-0/+4
Commit 64d47d50be7a ("net: dsa: mv88e6xxx: configure interface settings in mac_config") removed forcing of speed and duplex from mv88e6xxx_mac_config(), where the link is forced down, and left it only in mv88e6xxx_mac_link_up(), by which time link is unforced. It seems that (at least on 88E6190) when changing cmode to 2500base-x, if the link is not forced down, but the speed or duplex are still forced, the forcing of new settings for speed & duplex doesn't take in mv88e6xxx_mac_link_up(). Fix this by unforcing speed & duplex in mv88e6xxx_mac_link_down(). Fixes: 64d47d50be7a ("net: dsa: mv88e6xxx: configure interface settings in mac_config") Signed-off-by: Marek Behún <[email protected]> Reviewed-by: Russell King (Oracle) <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-12-13selftests/net: toeplitz: fix udp optionWillem de Bruijn1-1/+1
Tiny fix. Option -u ("use udp") does not take an argument. It can cause the next argument to silently be ignored. Fixes: 5ebfb4cc3048 ("selftests/net: toeplitz test") Signed-off-by: Willem de Bruijn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-12-13net: bcmgenet: Fix NULL vs IS_ERR() checkingMiaoqian Lin1-2/+2
The phy_attach() function does not return NULL. It returns error pointers. Signed-off-by: Miaoqian Lin <[email protected]> Acked-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-12-13usb: cdnsp: Fix incorrect status for control requestPawel Laszczak1-0/+2
Patch fixes incorrect status for control request. Without this fix all usb_request objects were returned to upper drivers with usb_reqest->status field set to -EINPROGRESS. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") cc: <[email protected]> Reported-by: Ken (Jian) He <[email protected]> Reviewed-by: Peter Chen <[email protected]> Signed-off-by: Pawel Laszczak <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-13usb: cdnsp: Fix issue in cdnsp_log_ep trace eventPawel Laszczak1-2/+2
Patch fixes incorrect order of __entry->stream_id and __entry->state parameters in TP_printk macro. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") cc: <[email protected]> Reviewed-by: Peter Chen <[email protected]> Signed-off-by: Pawel Laszczak <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-13usb: cdnsp: Fix incorrect calling of cdnsp_died functionPawel Laszczak1-1/+8
Patch restrict calling of cdnsp_died function during removing modules or software disconnect. This function was called because after transition controller to HALT state the driver starts handling the deferred interrupt. In this case such interrupt can be simple ignored. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") cc: <[email protected]> Reviewed-by: Peter Chen <[email protected]> Signed-off-by: Pawel Laszczak <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-13usb: xhci-mtk: fix list_del warning when enable list debugChunfeng Yun1-1/+1
There is warning of 'list_del corruption' when enable list debug (CONFIG_DEBUG_LIST=y), fix it by using list_del_init() Fixes: 4ce186665e7c ("usb: xhci-mtk: Do not use xhci's virt_dev in drop_endpoint") Cc: stable <[email protected]> Signed-off-by: Chunfeng Yun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-13usb: gadget: u_ether: fix race in setting MAC address in setup phaseMarian Postevca1-10/+6
When listening for notifications through netlink of a new interface being registered, sporadically, it is possible for the MAC to be read as zero. The zero MAC address lasts a short period of time and then switches to a valid random MAC address. This causes problems for netd in Android, which assumes that the interface is malfunctioning and will not use it. In the good case we get this log: InterfaceController::getCfg() ifName usb0 hwAddr 92:a8:f0:73:79:5b ipv4Addr 0.0.0.0 flags 0x1002 In the error case we get these logs: InterfaceController::getCfg() ifName usb0 hwAddr 00:00:00:00:00:00 ipv4Addr 0.0.0.0 flags 0x1002 netd : interfaceGetCfg("usb0") netd : interfaceSetCfg() -> ServiceSpecificException (99, "[Cannot assign requested address] : ioctl() failed") The reason for the issue is the order in which the interface is setup, it is first registered through register_netdev() and after the MAC address is set. Fixed by first setting the MAC address of the net_device and after that calling register_netdev(). Fixes: bcd4a1c40bee885e ("usb: gadget: u_ether: construct with default values and add setters/getters") Cc: [email protected] Signed-off-by: Marian Postevca <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-13firmware: arm_scpi: Fix string overflow in SCPI genpd driverSudeep Holla1-3/+7
Without the bound checks for scpi_pd->name, it could result in the buffer overflow when copying the SCPI device name from the corresponding device tree node as the name string is set at maximum size of 30. Let us fix it by using devm_kasprintf so that the string buffer is allocated dynamically. Fixes: 8bec4337ad40 ("firmware: scpi: add device power domain support using genpd") Reported-by: Pedro Batista <[email protected]> Signed-off-by: Sudeep Holla <[email protected]> Cc: [email protected] Cc: Cristian Marussi <[email protected]> Link: https://lore.kernel.org/r/[email protected]' Signed-off-by: Arnd Bergmann <[email protected]>
2021-12-13Merge tag 'v5.16-rockchip-socfixes1' of ↵Arnd Bergmann1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes Prevent panic with FORTIFY_SOURCE in smp bringup. * tag 'v5.16-rockchip-socfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: rockchip: Use memcpy_toio instead of memcpy on smp bring-up Link: https://lore.kernel.org/r/1827929.9bfCS3lLB7@phil Signed-off-by: Arnd Bergmann <[email protected]>
2021-12-13Merge tag 'v5.16-rockchip-dtsfixes1' of ↵Arnd Bergmann5-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes Fixes for some board-level issues (regulators, mmc, poweroff, audio) * tag 'v5.16-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: fix poweroff on helios64 arm64: dts: rockchip: fix audio-supply for Rock Pi 4 arm64: dts: rockchip: fix rk3399-leez-p710 vcc3v3-lan supply arm64: dts: rockchip: fix rk3308-roc-cc vcc-sd supply arm64: dts: rockchip: remove mmc-hs400-enhanced-strobe from rk3399-khadas-edge Link: https://lore.kernel.org/r/3072346.MIvVl8DfR5@phil Signed-off-by: Arnd Bergmann <[email protected]>
2021-12-13Merge tag 'imx-fixes-5.16-2' of ↵Arnd Bergmann4-3/+24
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.16, round 2: - One fix on imx8m-blk-ctrl driver to get i.MX8MM MIPI reset work properly - Fix CSI_DATA07__ESAI_TX0 pad name in i.MX7ULL pin function header - Remove interconnect property from i.MX8MQ LCDIF device to fix the regression that LCDIF driver stops probe, because interconnect provider driver (imx-bus) hasn't been fully working. - Fix soc-imx driver to register SoC device only on i.MX platform. * tag 'imx-fixes-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx: Register SoC device only on i.MX boards soc: imx: imx8m-blk-ctrl: Fix imx8mm mipi reset ARM: dts: imx6ull-pinfunc: Fix CSI_DATA07__ESAI_TX0 pad name arm64: dts: imx8mq: remove interconnect property from lcdif Link: https://lore.kernel.org/r/20211211015625.GK4216@dragon Signed-off-by: Arnd Bergmann <[email protected]>
2021-12-13Merge tag 'tegra-for-5.16-firmware-fixes' of ↵Arnd Bergmann1-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes firmware: Fixes for v5.16-rc5 This contains a single fix for an incorrect usage of sizeof(). * tag 'tegra-for-5.16-firmware-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: firmware: tegra: Fix error application of sizeof() to pointer Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2021-12-13Merge tag 'asahi-soc-fixes-5.16' of https://github.com/AsahiLinux/linux into ↵Arnd Bergmann3-5/+9
arm/fixes Asahi SoC DT/binding fixes for 5.16. Just some minor DT fixups we found after things got merged. * tag 'asahi-soc-fixes-5.16' of https://github.com/AsahiLinux/linux: arm64: dts: apple: add #interrupt-cells property to pinctrl nodes dt-bindings: i2c: apple,i2c: allow multiple compatibles arm64: dts: apple: change ethernet0 device type to ethernet Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2021-12-13Merge tag 'socfpga_fix_for_v5.16_part_2' of ↵Arnd Bergmann7-8/+8
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/fixes SoCFPGA fix for v5.16, part 2 - Fix QSPI dts entry to include "jedec,spi-nor" * tag 'socfpga_fix_for_v5.16_part_2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: socfpga: dts: fix qspi node compatible Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2021-12-13Merge branch 'v5.16/fixes' of ↵Arnd Bergmann2-16/+15
git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/fixes * 'v5.16/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: arm64: meson: remove COMMON_CLK arm64: meson: fix dts for JetHub D1 Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2021-12-13Merge tag 'amdtee-fix-for-v5.16' of ↵Arnd Bergmann1-3/+2
git://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes AMD-TEE fix IS_ERR() bug * tag 'amdtee-fix-for-v5.16' of git://git.linaro.org/people/jens.wiklander/linux-tee: tee: amdtee: fix an IS_ERR() vs NULL bug Link: https://lore.kernel.org/r/20211130070351.GA2308099@jade Signed-off-by: Arnd Bergmann <[email protected]>
2021-12-13Merge tag 'imx-fixes-5.16' of ↵Arnd Bergmann4-2/+8
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.16: - A series from Vladimir Oltean to update SJA1105 switch RGMII delay for a few boards, so that kernel doesn't warn on the legacy bindings. - Remove redundant interrupt declaration for gpio-keys on board ls1088a-ten64, as this causes an IRQ reclaiming error on kernel v5.15 and later. * tag 'imx-fixes-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: ten64: remove redundant interrupt declaration for gpio-keys arm64: dts: lx2160abluebox3: update RGMII delays for sja1105 switch ARM: dts: ls1021a-tsn: update RGMII delays for sja1105 switch ARM: dts: imx6qp-prtwd3: update RGMII delays for sja1105 switch Link: https://lore.kernel.org/r/20211126100716.GF4216@dragon Signed-off-by: Arnd Bergmann <[email protected]>
2021-12-13Merge tag 'reset-fixes-for-v5.16' of git://git.pengutronix.de/pza/linux into ↵Arnd Bergmann1-8/+1
arm/fixes Reset controller fixes for v5.16 Well, just one: revert commit c045ceb5a145 ("reset: tegra-bpmp: Handle errors in BPMP response"), which exposed an issue with the Tegra194 HDA controller reset. BPMP response error handling will be reinstated once there's a fix for the HDA issue. * tag 'reset-fixes-for-v5.16' of git://git.pengutronix.de/pza/linux: reset: tegra-bpmp: Revert Handle errors in BPMP response Signed-off-by: Arnd Bergmann <[email protected]>
2021-12-13net/sched: sch_ets: don't remove idle classes from the round-robin listDavide Caratti1-2/+2
Shuang reported that the following script: 1) tc qdisc add dev ddd0 handle 10: parent 1: ets bands 8 strict 4 priomap 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 2) mausezahn ddd0 -A 10.10.10.1 -B 10.10.10.2 -c 0 -a own -b 00:c1:a0:c1:a0:00 -t udp & 3) tc qdisc change dev ddd0 handle 10: ets bands 4 strict 2 quanta 2500 2500 priomap 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 crashes systematically when line 2) is commented: list_del corruption, ffff8e028404bd30->next is LIST_POISON1 (dead000000000100) ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:47! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 954 Comm: tc Not tainted 5.16.0-rc4+ #478 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014 RIP: 0010:__list_del_entry_valid.cold.1+0x12/0x47 Code: fe ff 0f 0b 48 89 c1 4c 89 c6 48 c7 c7 08 42 1b 87 e8 1d c5 fe ff 0f 0b 48 89 fe 48 89 c2 48 c7 c7 98 42 1b 87 e8 09 c5 fe ff <0f> 0b 48 c7 c7 48 43 1b 87 e8 fb c4 fe ff 0f 0b 48 89 f2 48 89 fe RSP: 0018:ffffae46807a3888 EFLAGS: 00010246 RAX: 000000000000004e RBX: 0000000000000007 RCX: 0000000000000202 RDX: 0000000000000000 RSI: ffffffff871ac536 RDI: 00000000ffffffff RBP: ffffae46807a3a10 R08: 0000000000000000 R09: c0000000ffff7fff R10: 0000000000000001 R11: ffffae46807a36a8 R12: ffff8e028404b800 R13: ffff8e028404bd30 R14: dead000000000100 R15: ffff8e02fafa2400 FS: 00007efdc92e4480(0000) GS:ffff8e02fb600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000682f48 CR3: 00000001058be000 CR4: 0000000000350ef0 Call Trace: <TASK> ets_qdisc_change+0x58b/0xa70 [sch_ets] tc_modify_qdisc+0x323/0x880 rtnetlink_rcv_msg+0x169/0x4a0 netlink_rcv_skb+0x50/0x100 netlink_unicast+0x1a5/0x280 netlink_sendmsg+0x257/0x4d0 sock_sendmsg+0x5b/0x60 ____sys_sendmsg+0x1f2/0x260 ___sys_sendmsg+0x7c/0xc0 __sys_sendmsg+0x57/0xa0 do_syscall_64+0x3a/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7efdc8031338 Code: 89 02 48 c7 c0 ff ff ff ff eb b5 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 25 43 2c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 41 54 41 89 d4 55 RSP: 002b:00007ffdf1ce9828 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000061b37a97 RCX: 00007efdc8031338 RDX: 0000000000000000 RSI: 00007ffdf1ce9890 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000001 R09: 000000000078a940 R10: 000000000000000c R11: 0000000000000246 R12: 0000000000000001 R13: 0000000000688880 R14: 0000000000000000 R15: 0000000000000000 </TASK> Modules linked in: sch_ets sch_tbf dummy rfkill iTCO_wdt iTCO_vendor_support intel_rapl_msr intel_rapl_common joydev pcspkr i2c_i801 virtio_balloon i2c_smbus lpc_ich ip_tables xfs libcrc32c crct10dif_pclmul crc32_pclmul crc32c_intel serio_raw ghash_clmulni_intel ahci libahci libata virtio_blk virtio_console virtio_net net_failover failover sunrpc dm_mirror dm_region_hash dm_log dm_mod [last unloaded: sch_ets] ---[ end trace f35878d1912655c2 ]--- RIP: 0010:__list_del_entry_valid.cold.1+0x12/0x47 Code: fe ff 0f 0b 48 89 c1 4c 89 c6 48 c7 c7 08 42 1b 87 e8 1d c5 fe ff 0f 0b 48 89 fe 48 89 c2 48 c7 c7 98 42 1b 87 e8 09 c5 fe ff <0f> 0b 48 c7 c7 48 43 1b 87 e8 fb c4 fe ff 0f 0b 48 89 f2 48 89 fe RSP: 0018:ffffae46807a3888 EFLAGS: 00010246 RAX: 000000000000004e RBX: 0000000000000007 RCX: 0000000000000202 RDX: 0000000000000000 RSI: ffffffff871ac536 RDI: 00000000ffffffff RBP: ffffae46807a3a10 R08: 0000000000000000 R09: c0000000ffff7fff R10: 0000000000000001 R11: ffffae46807a36a8 R12: ffff8e028404b800 R13: ffff8e028404bd30 R14: dead000000000100 R15: ffff8e02fafa2400 FS: 00007efdc92e4480(0000) GS:ffff8e02fb600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000682f48 CR3: 00000001058be000 CR4: 0000000000350ef0 Kernel panic - not syncing: Fatal exception in interrupt Kernel Offset: 0x4e00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- we can remove 'q->classes[i].alist' only if DRR class 'i' was part of the active list. In the ETS scheduler DRR classes belong to that list only if the queue length is greater than zero: we need to test for non-zero value of 'q->classes[i].qdisc->q.qlen' before removing from the list, similarly to what has been done elsewhere in the ETS code. Fixes: de6d25924c2a ("net/sched: sch_ets: don't peek at classes beyond 'nbands'") Reported-by: Shuang Li <[email protected]> Signed-off-by: Davide Caratti <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-12-13drm: simpledrm: fix wrong unit with pixel clockAlejandro Concepcion-Rodriguez1-1/+1
Pixel clock has to be set in kHz. Signed-off-by: Alejandro Concepcion-Rodriguez <[email protected]> Fixes: 11e8f5fd223b ("drm: Add simpledrm driver") Signed-off-by: Thomas Zimmermann <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2021-12-13dmaengine: st_fdma: fix MODULE_ALIASAlyssa Ross1-1/+1
modprobe can't handle spaces in aliases. Fixes: 6b4cd727eaf1 ("dmaengine: st_fdma: Add STMicroelectronics FDMA engine driver support") Signed-off-by: Alyssa Ross <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2021-12-13dmaengine: idxd: fix missed completion on abort pathDave Jiang1-1/+17
Ming reported that with the abort path of the descriptor submission, there can be a window where a completed descriptor can be missed to be completed by the irq completion thread: CPU A CPU B Submit (successful) Submit (fail) irq_process_work_list() // empty llist_abort_desc() // remove all descs from pending list irq_process_pending_llist() // empty exit idxd_wq_thread() with no processing Add opportunistic descriptor completion in the abort path in order to remove the missed completion. Fixes: 6b4b87f2c31a ("dmaengine: idxd: fix submission race window") Reported-by: Ming Li <[email protected]> Signed-off-by: Dave Jiang <[email protected]> Link: https://lore.kernel.org/r/163898288714.443911.16084982766671976640.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <[email protected]>
2021-12-13dmaengine: ti: k3-udma: Fix smatch warningsVignesh Raghavendra1-50/+107
Smatch reports below warnings [1] wrt dereferencing rm_res when it can potentially be ERR_PTR(). This is possible when entire range is allocated to Linux Fix this case by making sure, there is no deference of rm_res when its ERR_PTR(). [1]: drivers/dma/ti/k3-udma.c:4524 udma_setup_resources() error: 'rm_res' dereferencing possible ERR_PTR() drivers/dma/ti/k3-udma.c:4537 udma_setup_resources() error: 'rm_res' dereferencing possible ERR_PTR() drivers/dma/ti/k3-udma.c:4681 bcdma_setup_resources() error: 'rm_res' dereferencing possible ERR_PTR() drivers/dma/ti/k3-udma.c:4696 bcdma_setup_resources() error: 'rm_res' dereferencing possible ERR_PTR() drivers/dma/ti/k3-udma.c:4711 bcdma_setup_resources() error: 'rm_res' dereferencing possible ERR_PTR() drivers/dma/ti/k3-udma.c:4848 pktdma_setup_resources() error: 'rm_res' dereferencing possible ERR_PTR() drivers/dma/ti/k3-udma.c:4861 pktdma_setup_resources() error: 'rm_res' dereferencing possible ERR_PTR() Reported-by: Nishanth Menon <[email protected]> Signed-off-by: Vignesh Raghavendra <[email protected]> Acked-by: Peter Ujfalusi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2021-12-12Linux 5.16-rc5Linus Torvalds1-1/+1
2021-12-12Merge tag 'usb-5.16-rc5' of ↵Linus Torvalds8-33/+61
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes for 5.16-rc5. They include: - gadget driver fixes for reported issues - xhci fixes for reported problems. - config endpoint parsing fixes for where we got bitfields wrong Most of these have been in linux-next, the remaining few were not, but got lots of local testing in my systems and in some cloud testing infrastructures" * tag 'usb-5.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: core: config: using bit mask instead of individual bits usb: core: config: fix validation of wMaxPacketValue entries USB: gadget: zero allocate endpoint 0 buffers USB: gadget: detect too-big endpoint 0 requests xhci: avoid race between disable slot command and host runtime suspend xhci: Remove CONFIG_USB_DEFAULT_PERSIST to prevent xHCI from runtime suspending Revert "usb: dwc3: dwc3-qcom: Enable tx-fifo-resize property by default"
2021-12-12Merge tag 'char-misc-5.16-rc5' of ↵Linus Torvalds34-102/+136
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are a bunch of small char/misc and other driver subsystem fixes. Included in here are: - iio driver fixes for reported problems - phy driver fixes for a number of reported problems - mhi resume bugfix for broken hardware - nvmem driver fix - rtsx driver fix for irq issues - fastrpc packet parsing fix All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (33 commits) bus: mhi: core: Add support for forced PM resume iio: trigger: stm32-timer: fix MODULE_ALIAS misc: rtsx: Avoid mangling IRQ during runtime PM nvmem: eeprom: at25: fix FRAM byte_len misc: fastrpc: fix improper packet size calculation MAINTAINERS: add maintainer for Qualcomm FastRPC driver bus: mhi: pci_generic: Fix device recovery failed issue iio: adc: stm32: fix null pointer on defer_probe error phy: HiSilicon: Fix copy and paste bug in error handling dt-bindings: phy: zynqmp-psgtr: fix USB phy name phy: ti: omap-usb2: Fix the kernel-doc style phy: qualcomm: ipq806x-usb: Fix kernel-doc style iio: at91-sama5d2: Fix incorrect sign extension iio: adc: axp20x_adc: fix charging current reporting on AXP22x iio: gyro: adxrs290: fix data signedness phy: ti: tusb1210: Fix the kernel-doc warn phy: qualcomm: usb-hsic: Fix the kernel-doc warn phy: qualcomm: qmp: Add missing struct documentation phy: mvebu-cp110-utmi: Fix kernel-doc warns iio: ad7768-1: Call iio_trigger_notify_done() on error ...
2021-12-12Merge tag 'timers-urgent-2021-12-12' of ↵Linus Torvalds2-3/+8
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Thomas Gleixner: "Two fixes for clock chip drivers: - A regression fix for the Designware APB timer. A recent change to the error checking code transformed the error condition wrongly so it turned into a fail if good condition. - Fix a clang build fail of the ARM architected timer driver" * tag 'timers-urgent-2021-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/arm_arch_timer: Force inlining of erratum_set_next_event_generic() clocksource/drivers/dw_apb_timer_of: Fix probe failure
2021-12-12Merge tag 'irq-urgent-2021-12-12' of ↵Linus Torvalds7-17/+14
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A set of interrupt chip driver fixes: - Fix the multi vector MSI allocation on Armada 370XP - Do interrupt acknowledgement correctly in the aspeed-scu driver - Make the IPR register offset correct in the NVIC driver - Make redistribution table flushing correct by issueing a SYNC command to ensure that the invalidation command has been executed - Plug a device tree node reference leak in the bcm7210-l2 driver - Trivial fixes in the MIPS GIC and the Apple AIC drivers" * tag 'irq-urgent-2021-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/irq-bcm7120-l2: Add put_device() after of_find_device_by_node() irqchip/irq-gic-v3-its.c: Force synchronisation when issuing INVALL irqchip/apple-aic: Mark aic_init_smp() as __init irqchip: nvic: Fix offset for Interrupt Priority Offsets irqchip/mips-gic: Use bitfield helpers irqchip/aspeed-scu: Replace update_bits with write_bits. irqchip/armada-370-xp: Fix support for Multi-MSI interrupts irqchip/armada-370-xp: Fix return value of armada_370_xp_msi_alloc()
2021-12-12recordmcount.pl: look for jgnop instruction as well as bcrl on s390Jerome Marchand1-1/+1
On s390, recordmcount.pl is looking for "bcrl 0,<xxx>" instructions in the objdump -d outpout. However since binutils 2.37, objdump -d display "jgnop <xxx>" for the same instruction. Update the mcount_regex so that it accepts both. Signed-off-by: Jerome Marchand <[email protected]> Reviewed-by: Miroslav Benes <[email protected]> Acked-by: Steven Rostedt (VMware) <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Carstens <[email protected]>
2021-12-12s390/entry: fix duplicate tracking of irq nesting levelSven Schnelle1-4/+5
In the current code, when exiting from idle, rcu_irq_enter() is called twice during irq entry: irq_entry_enter()-> rcu_irq_enter() irq_enter() -> rcu_irq_enter() This may lead to wrong results from rcu_is_cpu_rrupt_from_idle() because of a wrong dynticks nmi nesting count. Fix this by only calling irq_enter_rcu(). Cc: <[email protected]> # 5.12+ Reported-by: Mark Rutland <[email protected]> Fixes: 56e62a737028 ("s390: convert to generic entry") Signed-off-by: Sven Schnelle <[email protected]> Signed-off-by: Heiko Carstens <[email protected]>
2021-12-12Merge tag 'sched-urgent-2021-12-12' of ↵Linus Torvalds1-0/+14
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Thomas Gleixner: "A single fix for the x86 scheduler topology: Using cluster topology on hybrid CPUs, e.g. Alder Lake, biases the scheduler towards the ATOM cluster as that has more total capacity. Use selection based on CPU priority instead" * tag 'sched-urgent-2021-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched,x86: Don't use cluster topology for x86 hybrid CPUs
2021-12-12Merge tag 'csky-for-linus-5.16-rc5' of git://github.com/c-sky/csky-linuxLinus Torvalds1-2/+2
Pull csky from Guo Ren: "Only one fix for csky: fix fpu config macro" * tag 'csky-for-linus-5.16-rc5' of git://github.com/c-sky/csky-linux: csky: fix typo of fpu config macro
Powered by cgit, Gruvboxed by Blaster4385.