| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Jakub Wilk <[email protected]>
Signed-off-by: Jeff Layton <[email protected]>
|
|
Test the basic locking stuff on 2 fds: multiple read locks,
conflicts between read and write locks, use of len==0 for queries.
Also tests for F_UNLCK F_OFD_GETLK extension.
[ jlayton: fix unlink() pathname in selftest ]
Cc: Jeff Layton <[email protected]>
Cc: Chuck Lever <[email protected]>
Cc: Alexander Viro <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: Shuah Khan <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Stas Sergeev <[email protected]>
Signed-off-by: Jeff Layton <[email protected]>
|
|
Lenovo 82SJ doesn't have DMIC connected like 82V2 does. Narrow
the match down to only cover 82V2.
Reported-by: [email protected]
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217063
Fixes: 2232b2dd8cd4 ("ASoC: amd: yc: Add Lenovo Yoga Slim 7 Pro X to quirks table")
Signed-off-by: Mario Limonciello <[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]
|
|
preserve_pci_rom_image() was accessing the romsize field in
efi_pci_io_protocol_t directly instead of using the efi_table_attr()
helper. This prevents the ROM image from being saved correctly during a
mixed mode boot.
Fixes: 2c3625cb9fa2 ("efi/x86: Fold __setup_efi_pci32() and __setup_efi_pci64() into one function")
Signed-off-by: Mikel Rychliski <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
0-Day found a 34.6% regression in stress-ng's 'af-alg' test case, and
bisected it to commit b81fac906a8f ("x86/fpu: Move FPU initialization into
arch_cpu_finalize_init()"), which optimizes the FPU init order, and moves
the CR4_OSXSAVE enabling into a later place:
arch_cpu_finalize_init
identify_boot_cpu
identify_cpu
generic_identify
get_cpu_cap --> setup cpu capability
...
fpu__init_cpu
fpu__init_cpu_xstate
cr4_set_bits(X86_CR4_OSXSAVE);
As the FPU is not yet initialized the CPU capability setup fails to set
X86_FEATURE_OSXSAVE. Many security module like 'camellia_aesni_avx_x86_64'
depend on this feature and therefore fail to load, causing the regression.
Cure this by setting X86_FEATURE_OSXSAVE feature right after OSXSAVE
enabling.
[ tglx: Moved it into the actual BSP FPU initialization code and added a comment ]
Fixes: b81fac906a8f ("x86/fpu: Move FPU initialization into arch_cpu_finalize_init()")
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Feng Tang <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/lkml/[email protected]
Link: https://lore.kernel.org/lkml/[email protected]
|
|
The thread flag TIF_NEED_FPU_LOAD indicates that the FPU saved state is
valid and should be reloaded when returning to userspace. However, the
kernel will skip doing this if the FPU registers are already valid as
determined by fpregs_state_valid(). The logic embedded there considers
the state valid if two cases are both true:
1: fpu_fpregs_owner_ctx points to the current tasks FPU state
2: the last CPU the registers were live in was the current CPU.
This is usually correct logic. A CPU’s fpu_fpregs_owner_ctx is set to
the current FPU during the fpregs_restore_userregs() operation, so it
indicates that the registers have been restored on this CPU. But this
alone doesn’t preclude that the task hasn’t been rescheduled to a
different CPU, where the registers were modified, and then back to the
current CPU. To verify that this was not the case the logic relies on the
second condition. So the assumption is that if the registers have been
restored, AND they haven’t had the chance to be modified (by being
loaded on another CPU), then they MUST be valid on the current CPU.
Besides the lazy FPU optimizations, the other cases where the FPU
registers might not be valid are when the kernel modifies the FPU register
state or the FPU saved buffer. In this case the operation modifying the
FPU state needs to let the kernel know the correspondence has been
broken. The comment in “arch/x86/kernel/fpu/context.h” has:
/*
...
* If the FPU register state is valid, the kernel can skip restoring the
* FPU state from memory.
*
* Any code that clobbers the FPU registers or updates the in-memory
* FPU state for a task MUST let the rest of the kernel know that the
* FPU registers are no longer valid for this task.
*
* Either one of these invalidation functions is enough. Invalidate
* a resource you control: CPU if using the CPU for something else
* (with preemption disabled), FPU for the current task, or a task that
* is prevented from running by the current task.
*/
However, this is not completely true. When the kernel modifies the
registers or saved FPU state, it can only rely on
__fpu_invalidate_fpregs_state(), which wipes the FPU’s last_cpu
tracking. The exec path instead relies on fpregs_deactivate(), which sets
the CPU’s FPU context to NULL. This was observed to fail to restore the
reset FPU state to the registers when returning to userspace in the
following scenario:
1. A task is executing in userspace on CPU0
- CPU0’s FPU context points to tasks
- fpu->last_cpu=CPU0
2. The task exec()’s
3. While in the kernel the task is preempted
- CPU0 gets a thread executing in the kernel (such that no other
FPU context is activated)
- Scheduler sets task’s fpu->last_cpu=CPU0 when scheduling out
4. Task is migrated to CPU1
5. Continuing the exec(), the task gets to
fpu_flush_thread()->fpu_reset_fpregs()
- Sets CPU1’s fpu context to NULL
- Copies the init state to the task’s FPU buffer
- Sets TIF_NEED_FPU_LOAD on the task
6. The task reschedules back to CPU0 before completing the exec() and
returning to userspace
- During the reschedule, scheduler finds TIF_NEED_FPU_LOAD is set
- Skips saving the registers and updating task’s fpu→last_cpu,
because TIF_NEED_FPU_LOAD is the canonical source.
7. Now CPU0’s FPU context is still pointing to the task’s, and
fpu->last_cpu is still CPU0. So fpregs_state_valid() returns true even
though the reset FPU state has not been restored.
So the root cause is that exec() is doing the wrong kind of invalidate. It
should reset fpu->last_cpu via __fpu_invalidate_fpregs_state(). Further,
fpu__drop() doesn't really seem appropriate as the task (and FPU) are not
going away, they are just getting reset as part of an exec. So switch to
__fpu_invalidate_fpregs_state().
Also, delete the misleading comment that says that either kind of
invalidate will be enough, because it’s not always the case.
Fixes: 33344368cb08 ("x86/fpu: Clean up the fpu__clear() variants")
Reported-by: Lei Wang <[email protected]>
Signed-off-by: Rick Edgecombe <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Lijun Pan <[email protected]>
Reviewed-by: Sohil Mehta <[email protected]>
Acked-by: Lijun Pan <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter updates for net
This PR contains nf_tables updates for your *net* tree.
First patch fixes table validation, I broke this in 6.4 when tracking
validation state per table, reported by Pablo, fixup from myself.
Second patch makes sure objects waiting for memory release have been
released, this was broken in 6.1, patch from Pablo Neira Ayuso.
Patch three is a fix-for-fix from previous PR: In case a transaction
gets aborted, gc sequence counter needs to be incremented so pending
gc requests are invalidated, from Pablo.
Same for patch 4: gc list needs to use gc list lock, not destroy lock,
also from Pablo.
Patch 5 fixes a UaF in a set backend, but this should only occur when
failslab is enabled for GFP_KERNEL allocations, broken since feature
was added in 5.6, from myself.
Patch 6 fixes a double-free bug that was also added via previous PR:
We must not schedule gc work if the previous batch is still queued.
netfilter pull request 2023-08-23
* tag 'nf-23-08-23' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: defer gc run if previous batch is still pending
netfilter: nf_tables: fix out of memory error handling
netfilter: nf_tables: use correct lock to protect gc_list
netfilter: nf_tables: GC transaction race with abort path
netfilter: nf_tables: flush pending destroy work before netlink notifier
netfilter: nf_tables: validate all pending tables
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Hangbin Liu says:
====================
fix macvlan over alb bond support
Currently, the macvlan over alb bond is broken after commit
14af9963ba1e ("bonding: Support macvlans on top of tlb/rlb mode bonds").
Fix this and add relate tests.
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Add a macvlan over bonding test with mode active-backup, balance-tlb
and balance-alb.
]# ./bond_macvlan.sh
TEST: active-backup: IPv4: client->server [ OK ]
TEST: active-backup: IPv6: client->server [ OK ]
TEST: active-backup: IPv4: client->macvlan_1 [ OK ]
TEST: active-backup: IPv6: client->macvlan_1 [ OK ]
TEST: active-backup: IPv4: client->macvlan_2 [ OK ]
TEST: active-backup: IPv6: client->macvlan_2 [ OK ]
TEST: active-backup: IPv4: macvlan_1->macvlan_2 [ OK ]
TEST: active-backup: IPv6: macvlan_1->macvlan_2 [ OK ]
TEST: active-backup: IPv4: server->client [ OK ]
TEST: active-backup: IPv6: server->client [ OK ]
TEST: active-backup: IPv4: macvlan_1->client [ OK ]
TEST: active-backup: IPv6: macvlan_1->client [ OK ]
TEST: active-backup: IPv4: macvlan_2->client [ OK ]
TEST: active-backup: IPv6: macvlan_2->client [ OK ]
TEST: active-backup: IPv4: macvlan_2->macvlan_2 [ OK ]
TEST: active-backup: IPv6: macvlan_2->macvlan_2 [ OK ]
[...]
TEST: balance-alb: IPv4: client->server [ OK ]
TEST: balance-alb: IPv6: client->server [ OK ]
TEST: balance-alb: IPv4: client->macvlan_1 [ OK ]
TEST: balance-alb: IPv6: client->macvlan_1 [ OK ]
TEST: balance-alb: IPv4: client->macvlan_2 [ OK ]
TEST: balance-alb: IPv6: client->macvlan_2 [ OK ]
TEST: balance-alb: IPv4: macvlan_1->macvlan_2 [ OK ]
TEST: balance-alb: IPv6: macvlan_1->macvlan_2 [ OK ]
TEST: balance-alb: IPv4: server->client [ OK ]
TEST: balance-alb: IPv6: server->client [ OK ]
TEST: balance-alb: IPv4: macvlan_1->client [ OK ]
TEST: balance-alb: IPv6: macvlan_1->client [ OK ]
TEST: balance-alb: IPv4: macvlan_2->client [ OK ]
TEST: balance-alb: IPv6: macvlan_2->client [ OK ]
TEST: balance-alb: IPv4: macvlan_2->macvlan_2 [ OK ]
TEST: balance-alb: IPv6: macvlan_2->macvlan_2 [ OK ]
Signed-off-by: Hangbin Liu <[email protected]>
Acked-by: Jay Vosburgh <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Add a new testing topo bond_topo_2d1c.sh which is used more commonly.
Make bond_topo_3d1c.sh just source bond_topo_2d1c.sh and add the
extra link.
Signed-off-by: Hangbin Liu <[email protected]>
Acked-by: Jay Vosburgh <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
The commit 14af9963ba1e ("bonding: Support macvlans on top of tlb/rlb mode
bonds") aims to enable the use of macvlans on top of rlb bond mode. However,
the current rlb bond mode only handles ARP packets to update remote neighbor
entries. This causes an issue when a macvlan is on top of the bond, and
remote devices send packets to the macvlan using the bond's MAC address
as the destination. After delivering the packets to the macvlan, the macvlan
will rejects them as the MAC address is incorrect. Consequently, this commit
makes macvlan over bond non-functional.
To address this problem, one potential solution is to check for the presence
of a macvlan port on the bond device using netif_is_macvlan_port(bond->dev)
and return NULL in the rlb_arp_xmit() function. However, this approach
doesn't fully resolve the situation when a VLAN exists between the bond and
macvlan.
So let's just do a partial revert for commit 14af9963ba1e in rlb_arp_xmit().
As the comment said, Don't modify or load balance ARPs that do not originate
locally.
Fixes: 14af9963ba1e ("bonding: Support macvlans on top of tlb/rlb mode bonds")
Reported-by: [email protected]
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2117816
Signed-off-by: Hangbin Liu <[email protected]>
Acked-by: Jay Vosburgh <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Negative ifindexes are illegal, but the kernel does not validate the
ifindex in the ancillary header of RTM_NEWLINK messages, resulting in
the kernel generating a warning [1] when such an ifindex is specified.
Fix by rejecting negative ifindexes.
[1]
WARNING: CPU: 0 PID: 5031 at net/core/dev.c:9593 dev_index_reserve+0x1a2/0x1c0 net/core/dev.c:9593
[...]
Call Trace:
<TASK>
register_netdevice+0x69a/0x1490 net/core/dev.c:10081
br_dev_newlink+0x27/0x110 net/bridge/br_netlink.c:1552
rtnl_newlink_create net/core/rtnetlink.c:3471 [inline]
__rtnl_newlink+0x115e/0x18c0 net/core/rtnetlink.c:3688
rtnl_newlink+0x67/0xa0 net/core/rtnetlink.c:3701
rtnetlink_rcv_msg+0x439/0xd30 net/core/rtnetlink.c:6427
netlink_rcv_skb+0x16b/0x440 net/netlink/af_netlink.c:2545
netlink_unicast_kernel net/netlink/af_netlink.c:1342 [inline]
netlink_unicast+0x536/0x810 net/netlink/af_netlink.c:1368
netlink_sendmsg+0x93c/0xe40 net/netlink/af_netlink.c:1910
sock_sendmsg_nosec net/socket.c:728 [inline]
sock_sendmsg+0xd9/0x180 net/socket.c:751
____sys_sendmsg+0x6ac/0x940 net/socket.c:2538
___sys_sendmsg+0x135/0x1d0 net/socket.c:2592
__sys_sendmsg+0x117/0x1e0 net/socket.c:2621
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: 38f7b870d4a6 ("[RTNETLINK]: Link creation API")
Reported-by: [email protected]
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Reviewed-by: Jakub Kicinski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.5
A relatively large but generally not super urgent set of fixes for ASoC,
including some quirks and a MAINTAINERS update. There's also an update
to cs35l56 to change the firmware ABI, there are no current shipping
systems which use the current interface and the sooner we get the new
interface in the less likely it is that something will start.
It'd be nice if these landed for v6.5 but not the end of the world if
they wait till v6.6.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Make an existing ACPI IRQ override quirk for PCSpecialist Elimina Pro
16 M work as intended (Hans de Goede)"
* tag 'acpi-6.5-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: resource: Fix IRQ override quirk for PCSpecialist Elimina Pro 16 M
|
|
After the commit in the Fixes: line below, HPD polling stopped working
on i915, since after that change calling drm_kms_helper_poll_enable()
doesn't restart drm_mode_config::output_poll_work if the work was
stopped (no connectors needing polling) and enabling polling for a
connector (during runtime suspend or detecting an HPD IRQ storm).
After the above change calling drm_kms_helper_poll_enable() is a nop
after it's been called already and polling for some connectors was
disabled/re-enabled.
Fix this by calling drm_kms_helper_poll_reschedule() added in the
previous patch instead, which reschedules the work whenever expected.
Fixes: d33a54e3991d ("drm/probe_helper: sort out poll_running vs poll_enabled")
CC: [email protected] # 6.4+
Cc: Dmitry Baryshkov <[email protected]>
Cc: [email protected]
Reviewed-by: Jouni Högander <[email protected]>
Signed-off-by: Imre Deak <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 50452f2f76852322620b63e62922b85e955abe94)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
Add a helper to reschedule drm_mode_config::output_poll_work after
polling has been enabled for a connector (and needing a reschedule,
since previously polling was disabled for all connectors and hence
output_poll_work was not running).
This is needed by the next patch fixing HPD polling on i915.
CC: [email protected] # 6.4+
Cc: Dmitry Baryshkov <[email protected]>
Cc: [email protected]
Reviewed-by: Jouni Högander <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Imre Deak <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit fe2352fd64029918174de4b460dfe6df0c6911cd)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
Andy Chiu <[email protected]> says:
We add a vlenb field in Vector context and save it with the
riscv_vstate_save() macro. It should not cause performance regression as
VLENB is a design-time constant and is frequently used by hardware.
Also, adding this field into the __sc_riscv_v_state may benifit us on a
future compatibility issue becuse a hardware may have writable VLENB.
Adding and saving VLENB have an immediate benifit as it gives ptrace a
better view of the Vector extension and makes it possible to reconstruct
Vector register files from the dump without doing an additional csr read.
This patchset also sync the number of note types between us and gdb for
riscv to solve a conflicting note.
This is not an ABI break given that 6.5 has not been released yet.
* b4-shazam-merge:
RISC-V: vector: export VLENB csr in __sc_riscv_v_state
RISC-V: Remove ptrace support for vectors
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
Associate the swnode of the GPIO device's (which is the interrupt
controller here) with the irq domain. Otherwise the interrupt-controller
device attribute is a no-op.
Fixes: cb8c474e79be ("gpio: sim: new testing module")
Signed-off-by: Bartosz Golaszewski <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
|
|
If a GPIO simulator device is unbound with interrupts still requested,
we will hit a use-after-free issue in __irq_domain_deactivate_irq(). The
owner of the irq domain must dispose of all mappings before destroying
the domain object.
Fixes: cb8c474e79be ("gpio: sim: new testing module")
Signed-off-by: Bartosz Golaszewski <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
|
|
vmw_bo_unreference sets the input buffer to null on exit, resulting in
null ptr deref's on the subsequent drm gem put calls.
This went unnoticed because only very old userspace would be exercising
those paths but it wouldn't be hard to hit on old distros with brand
new kernels.
Introduce a new function that abstracts unrefing of user bo's to make
the code cleaner and more explicit.
Signed-off-by: Zack Rusin <[email protected]>
Reported-by: Ian Forbes <[email protected]>
Fixes: 9ef8d83e8e25 ("drm/vmwgfx: Do not drop the reference to the handle too soon")
Cc: <[email protected]> # v6.4+
Reviewed-by: Maaz Mombasawala<[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
For multiple commands the driver was not correctly validating the shader
stages resulting in possible kernel oopses. The validation code was only.
if ever, checking the upper bound on the shader stages but never a lower
bound (valid shader stages start at 1 not 0).
Fixes kernel oopses ending up in vmw_binding_add, e.g.:
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 1 PID: 2443 Comm: testcase Not tainted 6.3.0-rc4-vmwgfx #1
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020
RIP: 0010:vmw_binding_add+0x4c/0x140 [vmwgfx]
Code: 7e 30 49 83 ff 0e 0f 87 ea 00 00 00 4b 8d 04 7f 89 d2 89 cb 48 c1 e0 03 4c 8b b0 40 3d 93 c0 48 8b 80 48 3d 93 c0 49 0f af de <48> 03 1c d0 4c 01 e3 49 8>
RSP: 0018:ffffb8014416b968 EFLAGS: 00010206
RAX: ffffffffc0933ec0 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 00000000ffffffff RSI: ffffb8014416b9c0 RDI: ffffb8014316f000
RBP: ffffb8014416b998 R08: 0000000000000003 R09: 746f6c735f726564
R10: ffffffffaaf2bda0 R11: 732e676e69646e69 R12: ffffb8014316f000
R13: ffffb8014416b9c0 R14: 0000000000000040 R15: 0000000000000006
FS: 00007fba8c0af740(0000) GS:ffff8a1277c80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000007c0933eb8 CR3: 0000000118244001 CR4: 00000000003706e0
Call Trace:
<TASK>
vmw_view_bindings_add+0xf5/0x1b0 [vmwgfx]
? ___drm_dbg+0x8a/0xb0 [drm]
vmw_cmd_dx_set_shader_res+0x8f/0xc0 [vmwgfx]
vmw_execbuf_process+0x590/0x1360 [vmwgfx]
vmw_execbuf_ioctl+0x173/0x370 [vmwgfx]
? __drm_dev_dbg+0xb4/0xe0 [drm]
? __pfx_vmw_execbuf_ioctl+0x10/0x10 [vmwgfx]
drm_ioctl_kernel+0xbc/0x160 [drm]
drm_ioctl+0x2d2/0x580 [drm]
? __pfx_vmw_execbuf_ioctl+0x10/0x10 [vmwgfx]
? do_fault+0x1a6/0x420
vmw_generic_ioctl+0xbd/0x180 [vmwgfx]
vmw_unlocked_ioctl+0x19/0x20 [vmwgfx]
__x64_sys_ioctl+0x96/0xd0
do_syscall_64+0x5d/0x90
? handle_mm_fault+0xe4/0x2f0
? debug_smp_processor_id+0x1b/0x30
? fpregs_assert_state_consistent+0x2e/0x50
? exit_to_user_mode_prepare+0x40/0x180
? irqentry_exit_to_user_mode+0xd/0x20
? irqentry_exit+0x3f/0x50
? exc_page_fault+0x8b/0x180
entry_SYSCALL_64_after_hwframe+0x72/0xdc
Signed-off-by: Zack Rusin <[email protected]>
Cc: [email protected]
Reported-by: Ziming Zhang <[email protected]>
Testcase-found-by: Niels De Graef <[email protected]>
Fixes: d80efd5cb3de ("drm/vmwgfx: Initial DX support")
Cc: <[email protected]> # v4.3+
Reviewed-by: Maaz Mombasawala<[email protected]>
Reviewed-by: Martin Krastev <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Like a few other drivers, YMFPCI driver needs to clean up with
snd_card_free() call at an error path of the probe; otherwise the
other devres resources are released before the card and it results in
the UAF.
This patch uses the helper for handling the probe error gracefully.
Fixes: f33fc1576757 ("ALSA: ymfpci: Create card with device-managed snd_devm_card_new()")
Cc: <[email protected]>
Reported-and-tested-by: Takashi Yano <[email protected]>
Closes: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Currently ztailpacking pclusters are chained with FOLLOWED_NOINPLACE and
not recorded into the managed_pslots XArray.
After commit 7674a42f35ea ("erofs: use struct lockref to replace
handcrafted approach"), ztailpacking pclusters won't be freed with
erofs_workgroup_put() anymore, which will cause the following issue:
BUG erofs_pcluster-1 (Tainted: G OE ): Objects remaining in erofs_pcluster-1 on __kmem_cache_shutdown()
Use z_erofs_free_pcluster() directly to free ztailpacking pclusters.
Fixes: 7674a42f35ea ("erofs: use struct lockref to replace handcrafted approach")
Signed-off-by: Jingbo Xu <[email protected]>
Reviewed-by: Gao Xiang <[email protected]>
Reviewed-by: Chao Yu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Gao Xiang <[email protected]>
|
|
The `dedupe` and `fragments` features have been merged for a year.
They are mostly stable now.
Reviewed-by: Gao Xiang <[email protected]>
Reviewed-by: Chao Yu <[email protected]>
Signed-off-by: sunshijie <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Gao Xiang <[email protected]>
|
|
It's a straight-forward conversion and no logic changes (except that
it renames the corresponding tracepoint.)
Reviewed-by: Chao Yu <[email protected]>
Signed-off-by: Gao Xiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
It's a straight-forward conversion except that readahead_folio()
will do folio_put() in advance but it doesn't matter since folios
are still locked.
As before, since file-backed folios (pages for now) are locked, so
we could temporarily use folio->private as an internal counter to
indicate split parts of each folio for the corresponding pclusters
to decompress.
When such counter becomes zero, the folio will be finally unlocked
(see compress.h and z_erofs_onlinepage_endio()).
Reviewed-by: Chao Yu <[email protected]>
Signed-off-by: Gao Xiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
EROFS_MAP_FULL_MAPPED is more accurate to decide if caching the last
incomplete pcluster for later read or not.
Reviewed-by: Yue Hu <[email protected]>
Reviewed-by: Chao Yu <[email protected]>
Signed-off-by: Gao Xiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
It can be folded into z_erofs_onlinepage_endio() to simplify the code.
Reviewed-by: Yue Hu <[email protected]>
Reviewed-by: Chao Yu <[email protected]>
Signed-off-by: Gao Xiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
- Fix a typo: spiltted => split;
- Move !EROFS_MAP_MAPPED and EROFS_MAP_FRAGMENT upwards;
- Increase `split` in advance to avoid unnecessary repeats.
Reviewed-by: Yue Hu <[email protected]>
Reviewed-by: Chao Yu <[email protected]>
Signed-off-by: Gao Xiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Some preparation logic should be part of z_erofs_pcluster_begin()
instead of z_erofs_do_read_page(). Let's move now.
Reviewed-by: Yue Hu <[email protected]>
Reviewed-by: Chao Yu <[email protected]>
Signed-off-by: Gao Xiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
{collector,collection} were once reserved in order to indicate different
runtime logical extent instance of multi-reference pclusters.
However, de-duplicated decompression has been landed in a more flexable
way, thus `struct z_erofs_collection` was formally removed in commit
87ca34a7065d ("erofs: get rid of `struct z_erofs_collection'").
Let's handle the remaining leftovers, for example:
`z_erofs_collector_begin` => `z_erofs_pcluster_begin`
`z_erofs_collector_end` => `z_erofs_pcluster_end`
as well as some comments. No logic changes.
Reviewed-by: Yue Hu <[email protected]>
Reviewed-by: Chao Yu <[email protected]>
Signed-off-by: Gao Xiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
A trivial cleanup to make the fragment handling logic more clear.
Reviewed-by: Yue Hu <[email protected]>
Reviewed-by: Chao Yu <[email protected]>
Signed-off-by: Gao Xiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
As erofs_fs_type has been declared in internal.h, there is no use to
declare repeatedly in super.c.
Signed-off-by: Ferry Meng <[email protected]>
Reviewed-by: Gao Xiang <[email protected]>
eviewed-by: Chao Yu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Gao Xiang <[email protected]>
|
|
To improve memory access efficiency and enable statistics functionality,
add SLAB_MEM_SPREAD and SLAB_ACCOUNT flag during erofs_inode_cachep's
allocation time.
Signed-off-by: Ferry Meng <[email protected]>
Reviewed-by: Gao Xiang <[email protected]>
Reviewed-by: Chao Yu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Gao Xiang <[email protected]>
|
|
Remove some redundant comments in erofs/super.c, and avoid unncessary
line breaks for cleanup.
Signed-off-by: Ferry Meng <[email protected]>
Reviewed-by: Gao Xiang <[email protected]>
Reviewed-by: Chao Yu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Gao Xiang <[email protected]>
|
|
Don't warn users since -EINTR can be returned due to user interruption.
Also suppress warning messages of readmore.
Signed-off-by: Ferry Meng <[email protected]>
Reviewed-by: Gao Xiang <[email protected]>
Reviewed-by: Yue Hu <[email protected]>
Reviewed-by: Chao Yu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Gao Xiang <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"Final set of three small fixes for 6.5"
* tag 'platform-drivers-x86-v6.5-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/mellanox: Fix mlxbf-tmfifo not handling all virtio CONSOLE notifications
platform/x86: ideapad-laptop: Add support for new hotkeys found on ThinkBook 14s Yoga ITL
platform/x86: lenovo-ymc: Add Lenovo Yoga 7 14ACN6 to ec_trigger_quirk_dmi_table
|
|
notifications
rshim console does not show all entries of dmesg.
Fixed by setting MLXBF_TM_TX_LWM_IRQ for every CONSOLE notification.
Signed-off-by: Shih-Yi Chen <[email protected]>
Reviewed-by: Liming Sung <[email protected]>
Reviewed-by: David Thompson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
|
|
Don't queue more gc work, else we may queue the same elements multiple
times.
If an element is flagged as dead, this can mean that either the previous
gc request was invalidated/discarded by a transaction or that the previous
request is still pending in the system work queue.
The latter will happen if the gc interval is set to a very low value,
e.g. 1ms, and system work queue is backlogged.
The sets refcount is 1 if no previous gc requeusts are queued, so add
a helper for this and skip gc run if old requests are pending.
Add a helper for this and skip the gc run in this case.
Fixes: f6c383b8c31a ("netfilter: nf_tables: adapt set backend to use GC transaction API")
Signed-off-by: Florian Westphal <[email protected]>
Reviewed-by: Pablo Neira Ayuso <[email protected]>
|
|
Several instances of pipapo_resize() don't propagate allocation failures,
this causes a crash when fault injection is enabled for gfp_kernel slabs.
Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Signed-off-by: Florian Westphal <[email protected]>
Reviewed-by: Stefano Brivio <[email protected]>
|
|
Use nf_tables_gc_list_lock spinlock, not nf_tables_destroy_list_lock to
protect the gc list.
Fixes: 5f68718b34a5 ("netfilter: nf_tables: GC transaction API to avoid race with control plane")
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Florian Westphal <[email protected]>
|
|
Abort path is missing a synchronization point with GC transactions. Add
GC sequence number hence any GC transaction losing race will be
discarded.
Fixes: 5f68718b34a5 ("netfilter: nf_tables: GC transaction API to avoid race with control plane")
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Florian Westphal <[email protected]>
|
|
Destroy work waits for the RCU grace period then it releases the objects
with no mutex held. All releases objects follow this path for
transactions, therefore, order is guaranteed and references to top-level
objects in the hierarchy remain valid.
However, netlink notifier might interfer with pending destroy work.
rcu_barrier() is not correct because objects are not release via RCU
callback. Flush destroy work before releasing objects from netlink
notifier path.
Fixes: d4bc8271db21 ("netfilter: nf_tables: netlink notifier might race to release objects")
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Florian Westphal <[email protected]>
|
|
We have to validate all tables in the transaction that are in
VALIDATE_DO state, the blamed commit below did not move the break
statement to its right location so we only validate one table.
Moreover, we can't init table->validate to _SKIP when a table object
is allocated.
If we do, then if a transcaction creates a new table and then
fails the transaction, nfnetlink will loop and nft will hang until
user cancels the command.
Add back the pernet state as a place to stash the last state encountered.
This is either _DO (we hit an error during commit validation) or _SKIP
(transaction passed all checks).
Fixes: 00c320f9b755 ("netfilter: nf_tables: make validation state per table")
Reported-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Florian Westphal <[email protected]>
|
|
Use the builtin_misc_device macro to simplify the code, which is the same
as declaring with device_initcall().
Signed-off-by: Li Zetao <[email protected]>
Acked-by: Niklas Schnelle <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Niklas Schnelle <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
|
|
Tony Krowiak says:
===================
This patch series is for the changes required in the vfio_ap device
driver to facilitate pass-through of crypto devices to a secure
execution guest. In particular, it is critical that no data from the
queues passed through to the SE guest is leaked when the guest is
destroyed. There are also some new response codes returned from the
PQAP(ZAPQ) and PQAP(TAPQ) commands that have been added to the
architecture in support of pass-through of crypto devices to SE guests;
these need to be accounted for when handling the reset of queues.
===================
Signed-off-by: Heiko Carstens <[email protected]>
|
|
The current analog gain TLV seems to have completely incorrect values in
it. The gain starts at 0.5dB, proceeds in 1dB steps, and has no mute
value, correct the control to match.
Signed-off-by: Charles Keepax <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
ssh://gitolite.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs online fsck update from Darrick Wong:
New code for 6.6:
* Allow the kernel to initiate a freeze of a filesystem. The kernel
and userspace can both hold a freeze on a filesystem at the same
time; the freeze is not lifted until /both/ holders lift it. This
will enable us to fix a longstanding bug in XFS online fsck.
* Use kernel-initated fsfreeze to fix some longstanding false negatives
in online fsck of the free space and inode counters.
Signed-off-by: Darrick J. Wong <[email protected]>
Message-Id: <20230822182604.GB11286@frogsfrogsfrogs>
Signed-off-by: Christian Brauner <[email protected]>
|
|
ssh://gitolite.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull filesystem freezing updates from Darrick Wong:
New code for 6.6:
* Allow the kernel to initiate a freeze of a filesystem. The kernel
and userspace can both hold a freeze on a filesystem at the same
time; the freeze is not lifted until /both/ holders lift it. This
will enable us to fix a longstanding bug in XFS online fsck.
Signed-off-by: Darrick J. Wong <[email protected]>
Message-Id: <20230822182604.GB11286@frogsfrogsfrogs>
Signed-off-by: Christian Brauner <[email protected]>
|
|
When building for power4, newer binutils don't recognise the "dcbfl"
extended mnemonic.
dcbfl RA, RB is equivalent to dcbf RA, RB, 1.
Switch to "dcbf" to avoid the build error.
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|