Age | Commit message (Collapse) | Author | Files | Lines |
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.1, part 3:
- Fix a small memory leak in mach-mxs code.
- Correct PCIe pad configuration for imx8mp-evk board.
- Fix ref/tcxo clock frequency property for imx6q-prti6q board.
* tag 'imx-fixes-6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx6q-prti6q: Fix ref/tcxo-clock-frequency properties
arm64: dts: imx8mp-evk: correct pcie pad settings
ARM: mxs: fix memory leak in mxs_machine_init()
Link: https://lore.kernel.org/r/20221119073812.GQ16229@T480
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes
- RSB bus communication fixes
- missing IOMMU reference property to H6 Hantro G2
* tag 'sunxi-fixes-for-6.1-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: h6: Add IOMMU reference to Hantro G2
media: dt-bindings: allwinner: h6-vpu-g2: Add IOMMU reference property
bus: sunxi-rsb: Support atomic transfers
bus: sunxi-rsb: Remove the shutdown callback
Link: https://lore.kernel.org/r/Y3ftpBFk5+fndA4B@jernej-laptop
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes
AT91 fixes for 6.1 #2
It contains:
- fix UDC on at91sam9g20ek boards by adding vbus pin
* tag 'at91-fixes-6.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: sam9g20ek: enable udc vbus gpio pinctrl
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
https://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes
Fix possible memory leak in optee_register_device()
* tag 'optee-fix-for-6.1' of https://git.linaro.org/people/jens.wiklander/linux-tee:
tee: optee: fix possible memory leak in optee_register_device()
Link: https://lore.kernel.org/r/Y3d2OuJ60U30OkZe@jade
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
Eliminate the following coccicheck warning:
./arch/loongarch/kernel/unwind_prologue.c:84:5-13: WARNING: Unsigned
expression compared with zero: frame_ra < 0
Signed-off-by: KaiLong Wang <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
|
|
Set _PAGE_DIRTY only if _PAGE_MODIFIED is set in {pmd,pte}_mkwrite().
Otherwise, _PAGE_DIRTY silences the TLB modify exception and make us
have no chance to mark a pmd/pte dirty (_PAGE_MODIFIED) for software.
Reviewed-by: Guo Ren <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
|
|
Now {pmd,pte}_mkdirty() set _PAGE_DIRTY bit unconditionally, this causes
random segmentation fault after commit 0ccf7f168e17bb7e ("mm/thp: carry
over dirty bit when thp splits on pmd").
The reason is: when fork(), parent process use pmd_wrprotect() to clear
huge page's _PAGE_WRITE and _PAGE_DIRTY (for COW); then pte_mkdirty() set
_PAGE_DIRTY as well as _PAGE_MODIFIED while splitting dirty huge pages;
once _PAGE_DIRTY is set, there will be no tlb modify exception so the COW
machanism fails; and at last memory corruption occurred between parent
and child processes.
So, we should set _PAGE_DIRTY only when _PAGE_WRITE is set in {pmd,pte}_
mkdirty().
Cc: [email protected]
Cc: Peter Xu <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
|
|
If a kernel thread is created by a user thread, it may carry FPU/SIMD
thread info flags (TIF_USEDFPU, TIF_USEDSIMD, etc.). Then it will be
considered as a fpu owner and kernel try to save its FPU/SIMD context
and cause such errors:
[ 41.518931] do_fpu invoked from kernel context![#1]:
[ 41.523933] CPU: 1 PID: 395 Comm: iou-wrk-394 Not tainted 6.1.0-rc5+ #217
[ 41.530757] Hardware name: Loongson Loongson-3A5000-7A1000-1w-CRB/Loongson-LS3A5000-7A1000-1w-CRB, BIOS vUDK2018-LoongArch-V2.0.pre-beta8 08/18/2022
[ 41.544064] $ 0 : 0000000000000000 90000000011e9468 9000000106c7c000 9000000106c7fcf0
[ 41.552101] $ 4 : 9000000106305d40 9000000106689800 9000000106c7fd08 0000000003995818
[ 41.560138] $ 8 : 0000000000000001 90000000009a72e4 0000000000000020 fffffffffffffffc
[ 41.568174] $12 : 0000000000000000 0000000000000000 0000000000000020 00000009aab7e130
[ 41.576211] $16 : 00000000000001ff 0000000000000407 0000000000000001 0000000000000000
[ 41.584247] $20 : 0000000000000000 0000000000000001 9000000106c7fd70 90000001002f0400
[ 41.592284] $24 : 0000000000000000 900000000178f740 90000000011e9834 90000001063057c0
[ 41.600320] $28 : 0000000000000000 0000000000000001 9000000006826b40 9000000106305140
[ 41.608356] era : 9000000000228848 _save_fp+0x0/0xd8
[ 41.613542] ra : 90000000011e9468 __schedule+0x568/0x8d0
[ 41.619160] CSR crmd: 000000b0
[ 41.619163] CSR prmd: 00000000
[ 41.622359] CSR euen: 00000000
[ 41.625558] CSR ecfg: 00071c1c
[ 41.628756] CSR estat: 000f0000
[ 41.635239] ExcCode : f (SubCode 0)
[ 41.638783] PrId : 0014c010 (Loongson-64bit)
[ 41.643191] Modules linked in: acpi_ipmi vfat fat ipmi_si ipmi_devintf cfg80211 ipmi_msghandler rfkill fuse efivarfs
[ 41.653734] Process iou-wrk-394 (pid: 395, threadinfo=0000000004ebe913, task=00000000636fa1be)
[ 41.662375] Stack : 00000000ffff0875 9000000006800ec0 9000000006800ec0 90000000002d57e0
[ 41.670412] 0000000000000001 0000000000000000 9000000106535880 0000000000000001
[ 41.678450] 9000000105291800 0000000000000000 9000000105291838 900000000178e000
[ 41.686487] 9000000106c7fd90 9000000106305140 0000000000000001 90000000011e9834
[ 41.694523] 00000000ffff0875 90000000011f034c 9000000105291838 9000000105291830
[ 41.702561] 0000000000000000 9000000006801440 00000000ffff0875 90000000002d48c0
[ 41.710597] 9000000128800001 9000000106305140 9000000105291838 9000000105291838
[ 41.718634] 9000000105291830 9000000107811740 9000000105291848 90000000009bf1e0
[ 41.726672] 9000000105291830 9000000107811748 2d6b72772d756f69 0000000000343933
[ 41.734708] 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 41.742745] ...
[ 41.745252] Call Trace:
[ 42.197868] [<9000000000228848>] _save_fp+0x0/0xd8
[ 42.205214] [<90000000011ed468>] __schedule+0x568/0x8d0
[ 42.210485] [<90000000011ed834>] schedule+0x64/0xd4
[ 42.215411] [<90000000011f434c>] schedule_timeout+0x88/0x188
[ 42.221115] [<90000000009c36d0>] io_wqe_worker+0x184/0x350
[ 42.226645] [<9000000000221cf0>] ret_from_kernel_thread+0xc/0x9c
This can be easily triggered by ltp testcase syscalls/io_uring02 and it
can also be easily fixed by clearing the FPU/SIMD thread info flags for
kernel threads in copy_thread().
Cc: [email protected]
Reported-by: Qi Hu <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
|
|
SMP operations can be shared by Loongson-2 series and Loongson-3 series,
so we change the prefix from loongson3 to loongson for all functions and
data structures.
Signed-off-by: Huacai Chen <[email protected]>
|
|
Combine acpi_boot_table_init() and acpi_boot_init() since they are very
simple, and we don't need to check the return value of acpi_boot_init().
Signed-off-by: Huacai Chen <[email protected]>
|
|
The latest version of grep claims the egrep is now obsolete so the build
now contains warnings that look like:
egrep: warning: egrep is obsolescent; using grep -E
Fix this up by changing the LoongArch Makefile to use "grep -E" instead.
Signed-off-by: Tiezhu Yang <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
|
|
Function sparx5_tc_setup_qdisc_ets() always returns negative value
because it return -EOPNOTSUPP in the end. This patch returns the
rersult of sparx5_tc_ets_add() and sparx5_tc_ets_del() directly.
Fixes: 211225428d65 ("net: microchip: sparx5: add support for offloading ets qdisc")
Signed-off-by: Lu Wei <[email protected]>
Reviewed-by: Daniel Machon <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
If device_register() returns error in vmbus_device_register(),
the name allocated by dev_set_name() must be freed. As comment
of device_register() says, it should use put_device() to give
up the reference in the error path. So fix this by calling
put_device(), then the name can be freed in kobject_cleanup().
Fixes: 09d50ff8a233 ("Staging: hv: make the Hyper-V virtual bus code build")
Signed-off-by: Yang Yingliang <[email protected]>
Reviewed-by: Michael Kelley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Wei Liu <[email protected]>
|
|
vmbus_add_channel_work()
In the error path of vmbus_device_register(), device_unregister()
is called, which calls vmbus_device_release(). The latter frees
the struct hv_device that was passed in to vmbus_device_register().
So remove the kfree() in vmbus_add_channel_work() to avoid a double
free.
Fixes: c2e5df616e1a ("vmbus: add per-channel sysfs info")
Suggested-by: Michael Kelley <[email protected]>
Signed-off-by: Yang Yingliang <[email protected]>
Reviewed-by: Michael Kelley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Wei Liu <[email protected]>
|
|
The AMD Secure Processor (ASP) and an SNP guest use a series of
AES-GCM keys called VMPCKs to communicate securely with each other.
The IV to this scheme is a sequence number that both the ASP and the
guest track.
Currently, this sequence number in a guest request must exactly match
the sequence number tracked by the ASP. This means that if the guest
sees an error from the host during a request it can only retry that
exact request or disable the VMPCK to prevent an IV reuse. AES-GCM
cannot tolerate IV reuse, see: "Authentication Failures in NIST version
of GCM" - Antoine Joux et al.
In order to address this, make handle_guest_request() delete the VMPCK
on any non successful return. To allow userspace querying the cert_data
length make handle_guest_request() save the number of pages required by
the host, then have handle_guest_request() retry the request without
requesting the extended data, then return the number of pages required
back to userspace.
[ bp: Massage, incorporate Tom's review comments. ]
Fixes: fce96cf044308 ("virt: Add SEV-SNP guest driver")
Reported-by: Peter Gonda <[email protected]>
Signed-off-by: Peter Gonda <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Reviewed-by: Tom Lendacky <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
|
|
The intel_display_power_*_domain() functions should always warn if a
default domain is returned as a fallback, fix this up. Spotted by Ville.
Fixes: 979e1b32e0e2 ("drm/i915: Sanitize the port -> DDI/AUX power domain mapping for each platform")
Cc: Ville Syrjälä <[email protected]>
Cc: Jouni Högander <[email protected]>
Signed-off-by: Imre Deak <[email protected]>
Reviewed-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 10b85f0e1d922210ae857afed6d012ec32c4b6cb)
Signed-off-by: Tvrtko Ursulin <[email protected]>
|
|
In i915_gem_madvise_ioctl() we immediately purge the object is not
currently used, like when the mm.pages are NULL. With shmem the pages
might still be hanging around or are perhaps swapped out. Similarly with
ttm we might still have the pages hanging around on the ttm resource,
like with lmem or shmem, but here we need to be extra careful since
async unbinds are possible as well as in-progress kernel moves. In
i915_ttm_purge() we expect the pipeline-gutting to nuke the ttm resource
for us, however if it's busy the memory is only moved to a ghost object,
which then leads to broken behaviour when for example clearing the
i915_tt->filp, since the actual ttm_tt is still alive and populated,
even though it's been moved to the ghost object. When we later destroy
the ghost object we hit the following, since the filp is now NULL:
[ +0.006982] #PF: supervisor read access in kernel mode
[ +0.005149] #PF: error_code(0x0000) - not-present page
[ +0.005147] PGD 11631d067 P4D 11631d067 PUD 115972067 PMD 0
[ +0.005676] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ +0.012962] Workqueue: events ttm_device_delayed_workqueue [ttm]
[ +0.006022] RIP: 0010:i915_ttm_tt_unpopulate+0x3a/0x70 [i915]
[ +0.005879] Code: 89 fb 48 85 f6 74 11 8b 55 4c 48 8b 7d 30 45 31 c0 31 c9 e8 18 6a e5 e0 80 7d 60 00 74 20 48 8b 45 68
8b 55 08 4c 89 e7 5b 5d <48> 8b 40 20 83 e2 01 41 5c 89 d1 48 8b 70
30 e9 42 b2 ff ff 4c 89
[ +0.018782] RSP: 0000:ffffc9000bf6fd70 EFLAGS: 00010202
[ +0.005244] RAX: 0000000000000000 RBX: ffff8883e12ae380 RCX: 0000000000000000
[ +0.007150] RDX: 000000008000000e RSI: ffffffff823559b4 RDI: ffff8883e12ae3c0
[ +0.007142] RBP: ffff888103b65d48 R08: 0000000000000001 R09: 0000000000000001
[ +0.007144] R10: 0000000000000001 R11: ffff88829c2c8040 R12: ffff8883e12ae3c0
[ +0.007148] R13: 0000000000000001 R14: ffff888115184140 R15: ffff888115184248
[ +0.007154] FS: 0000000000000000(0000) GS:ffff88844db00000(0000) knlGS:0000000000000000
[ +0.008108] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ +0.005763] CR2: 0000000000000020 CR3: 000000013fdb4004 CR4: 00000000003706e0
[ +0.007152] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ +0.007145] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ +0.007154] Call Trace:
[ +0.002459] <TASK>
[ +0.002126] ttm_tt_unpopulate.part.0+0x17/0x70 [ttm]
[ +0.005068] ttm_bo_tt_destroy+0x1c/0x50 [ttm]
[ +0.004464] ttm_bo_cleanup_memtype_use+0x25/0x40 [ttm]
[ +0.005244] ttm_bo_cleanup_refs+0x90/0x2c0 [ttm]
[ +0.004721] ttm_bo_delayed_delete+0x235/0x250 [ttm]
[ +0.004981] ttm_device_delayed_workqueue+0x13/0x40 [ttm]
[ +0.005422] process_one_work+0x248/0x560
[ +0.004028] worker_thread+0x4b/0x390
[ +0.003682] ? process_one_work+0x560/0x560
[ +0.004199] kthread+0xeb/0x120
[ +0.003163] ? kthread_complete_and_exit+0x20/0x20
[ +0.004815] ret_from_fork+0x1f/0x30
v2:
- Just use ttm_bo_wait() directly (Niranjana)
- Add testcase reference
Testcase: igt@gem_madvise@dontneed-evict-race
Fixes: 213d50927763 ("drm/i915/ttm: Introduce a TTM i915 gem object backend")
Reported-by: Niranjana Vishwanathapura <[email protected]>
Signed-off-by: Matthew Auld <[email protected]>
Cc: Andrzej Hajda <[email protected]>
Cc: Nirmoy Das <[email protected]>
Cc: <[email protected]> # v5.15+
Reviewed-by: Niranjana Vishwanathapura <[email protected]>
Acked-by: Nirmoy Das <[email protected]>
Reviewed-by: Andrzej Hajda <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 5524b5e52e08f675116a93296fe5bee60bc43c03)
Signed-off-by: Tvrtko Ursulin <[email protected]>
|
|
Shang XiaoJing says:
====================
nfc: Fix potential memory leak of skb
There are still somewhere maybe leak the skb, fix the memleaks by adding
fail path.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
s3fwrn5_nci_send() won't free the skb when it failed for the check
before s3fwrn5_write(). As the result, the skb will memleak. Free the
skb when the check failed.
Fixes: c04c674fadeb ("nfc: s3fwrn5: Add driver for Samsung S3FWRN5 NFC Chip")
Signed-off-by: Shang XiaoJing <[email protected]>
Suggested-by: Pavel Machek <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
nxp_nci_send() won't free the skb when it failed for the check before
write(). As the result, the skb will memleak. Free the skb when the
check failed.
Fixes: dece45855a8b ("NFC: nxp-nci: Add support for NXP NCI chips")
Signed-off-by: Shang XiaoJing <[email protected]>
Suggested-by: Pavel Machek <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
nfcmrvl_i2c_nci_send() will be called by nfcmrvl_nci_send(), and skb
should be freed in nfcmrvl_i2c_nci_send(). However, nfcmrvl_nci_send()
won't free the skb when it failed for the test_bit(). Free the skb when
test_bit() failed.
Fixes: b5b3e23e4cac ("NFC: nfcmrvl: add i2c driver")
Signed-off-by: Shang XiaoJing <[email protected]>
Suggested-by: Pavel Machek <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing/probes fixes from Steven Rostedt:
- Fix possible NULL pointer dereference on trace_event_file in
kprobe_event_gen_test_exit()
- Fix NULL pointer dereference for trace_array in
kprobe_event_gen_test_exit()
- Fix memory leak of filter string for eprobes
- Fix a possible memory leak in rethook_alloc()
- Skip clearing aggrprobe's post_handler in kprobe-on-ftrace case which
can cause a possible use-after-free
- Fix warning in eprobe filter creation
- Fix eprobe filter creation as it picked the wrong event for the
fields
* tag 'trace-probes-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/eprobe: Fix eprobe filter to make a filter correctly
tracing/eprobe: Fix warning in filter creation
kprobes: Skip clearing aggrprobe's post_handler in kprobe-on-ftrace case
rethook: fix a potential memleak in rethook_alloc()
tracing/eprobe: Fix memory leak of filter string
tracing: kprobe: Fix potential null-ptr-deref on trace_array in kprobe_event_gen_test_exit()
tracing: kprobe: Fix potential null-ptr-deref on trace_event_file in kprobe_event_gen_test_exit()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix polling to block on watermark like the reads do, as user space
applications get confused when the select says read is available, and
then the read blocks
- Fix accounting of ring buffer dropped pages as it is what is used to
determine if the buffer is empty or not
- Fix memory leak in tracing_read_pipe()
- Fix struct trace_array warning about being declared in parameters
- Fix accounting of ftrace pages used in output at start up.
- Fix allocation of dyn_ftrace pages by subtracting one from order
instead of diving it by 2
- Static analyzer found a case were a pointer being used outside of a
NULL check (rb_head_page_deactivate())
- Fix possible NULL pointer dereference if kstrdup() fails in
ftrace_add_mod()
- Fix memory leak in test_gen_synth_cmd() and test_empty_synth_event()
- Fix bad pointer dereference in register_synth_event() on error path
- Remove unused __bad_type_size() method
- Fix possible NULL pointer dereference of entry in list 'tr->err_log'
- Fix NULL pointer deference race if eprobe is called before the event
setup
* tag 'trace-v6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix race where eprobes can be called before the event
tracing: Fix potential null-pointer-access of entry in list 'tr->err_log'
tracing: Remove unused __bad_type_size() method
tracing: Fix wild-memory-access in register_synth_event()
tracing: Fix memory leak in test_gen_synth_cmd() and test_empty_synth_event()
ftrace: Fix null pointer dereference in ftrace_add_mod()
ring_buffer: Do not deactivate non-existant pages
ftrace: Optimize the allocation for mcount entries
ftrace: Fix the possible incorrect kernel message
tracing: Fix warning on variable 'struct trace_array'
tracing: Fix memory leak in tracing_read_pipe()
ring-buffer: Include dropped pages in counting dirty patches
tracing/ring-buffer: Have polling block on watermark
|
|
The flag that tells the event to call its triggers after reading the event
is set for eprobes after the eprobe is enabled. This leads to a race where
the eprobe may be triggered at the beginning of the event where the record
information is NULL. The eprobe then dereferences the NULL record causing
a NULL kernel pointer bug.
Test for a NULL record to keep this from happening.
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]/
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Cc: Linux Trace Kernel <[email protected]>
Cc: Tzvetomir Stoyanov <[email protected]>
Cc: Tom Zanussi <[email protected]>
Cc: [email protected]
Fixes: 7491e2c442781 ("tracing: Add a probe that attaches to trace events")
Acked-by: Masami Hiramatsu (Google) <[email protected]>
Reported-by: Rafael Mendonca <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Do not hold fpregs lock when inheriting FPU permissions because the
fpregs lock disables preemption on RT but fpu_inherit_perms() does
spin_lock_irq(), which, on RT, uses rtmutexes and they need to be
preemptible.
- Check the page offset and the length of the data supplied by
userspace for overflow when specifying a set of pages to add to an
SGX enclave
* tag 'x86_urgent_for_v6.1_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Drop fpregs lock before inheriting FPU permissions
x86/sgx: Add overflow check in sgx_validate_offset_length()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Fix a small race on the task's exit path where there's a
misunderstanding whether the task holds rq->lock or not
- Prevent processes from getting killed when using deprecated or
unknown rseq ABI flags in order to be able to fuzz the rseq() syscall
with syzkaller
* tag 'sched_urgent_for_v6.1_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Fix race in task_call_func()
rseq: Use pr_warn_once() when deprecated/unknown ABI flags are encountered
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Fix an intel PT erratum where CPUs do not support single range output
for more than 4K
- Fix a NULL ptr dereference which can happen after an NMI interferes
with the event enabling dance in amd_pmu_enable_all()
- Free the events array too when freeing uncore contexts on CPU online,
thereby fixing a memory leak
- Improve the pending SIGTRAP check
* tag 'perf_urgent_for_v6.1_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/pt: Fix sampling using single range output
perf/x86/amd: Fix crash due to race between amd_pmu_enable_all, perf NMI and throttling
perf/x86/amd/uncore: Fix memory leak for events array
perf: Improve missing SIGTRAP checking
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Borislav Petkov:
- Fix a build error with clang 11
* tag 'locking_urgent_for_v6.1_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking: Fix qspinlock/x86 inline asm error
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
- Fix writable sections being moved into the rodata region.
Thanks to Nicholas Piggin and Christophe Leroy.
* tag 'powerpc-6.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Fix writable sections being moved into the rodata region
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Five small fixes, all in drivers.
Most of these are error leg freeing issues, with the only really user
visible one being the zfcp fix"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: iscsi: Fix possible memory leak when device_register() failed
scsi: zfcp: Fix double free of FSF request when qdio send fails
scsi: scsi_debug: Fix possible UAF in sdebug_add_host_helper()
scsi: target: tcm_loop: Fix possible name leak in tcm_loop_setup_hba_bus()
scsi: mpi3mr: Suppress command reply debug prints
|
|
This debug code dereferences "old_iface" after it was already freed by
the call to release_iface(). Re-order the debugging to avoid this
issue.
Fixes: b54034a73baf ("cifs: during reconnect, update interface if necessary")
Cc: [email protected] # 5.19+
Reviewed-by: Paulo Alcantara (SUSE) <[email protected]>
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Preset accessed bits in Intel VT-d page-directory entries to avoid
hardware error
- Set supervisor bit only when Intel IOMMU has the SRS capability
* tag 'iommu-fixes-v6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Set SRE bit only when hardware has SRS cap
iommu/vt-d: Preset Access bit for IOVA in FL non-leaf paging entries
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Update MAINTAINERS with Nathan and Nicolas as new Kbuild reviewers
- Increment the debian revision for deb-pkg builds
* tag 'kbuild-fixes-v6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Restore .version auto-increment behaviour for Debian packages
MAINTAINERS: Add linux-kbuild's patchwork
MAINTAINERS: Remove Michal Marek from Kbuild maintainers
MAINTAINERS: Add Nathan and Nicolas to Kbuild reviewers
|
|
Pull cifs fixes from Steve French:
- two missing and one incorrect return value checks
- fix leak on tlink mount failure
* tag '6.1-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: add check for returning value of SMB2_set_info_init
cifs: Fix wrong return value checking when GETFLAGS
cifs: add check for returning value of SMB2_close_init
cifs: Fix connections leak when tlink setup failed
|
|
SRS cap is the hardware cap telling if the hardware IOMMU can support
requests seeking supervisor privilege or not. SRE bit in scalable-mode
PASID table entry is treated as Reserved(0) for implementation not
supporting SRS cap.
Checking SRS cap before setting SRE bit can avoid the non-recoverable
fault of "Non-zero reserved field set in PASID Table Entry" caused by
setting SRE bit while there is no SRS cap support. The fault messages
look like below:
DMAR: DRHD: handling fault status reg 2
DMAR: [DMA Read NO_PASID] Request device [00:0d.0] fault addr 0x1154e1000
[fault reason 0x5a]
SM: Non-zero reserved field set in PASID Table Entry
Fixes: 6f7db75e1c46 ("iommu/vt-d: Add second level page table interface")
Cc: [email protected]
Signed-off-by: Tina Zhang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lu Baolu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
|
|
The A/D bits are preseted for IOVA over first level(FL) usage for both
kernel DMA (i.e, domain typs is IOMMU_DOMAIN_DMA) and user space DMA
usage (i.e., domain type is IOMMU_DOMAIN_UNMANAGED).
Presetting A bit in FL requires to preset the bit in every related paging
entries, including the non-leaf ones. Otherwise, hardware may treat this
as an error. For example, in a case of ECAP_REG.SMPWC==0, DMA faults might
occur with below DMAR fault messages (wrapped for line length) dumped.
DMAR: DRHD: handling fault status reg 2
DMAR: [DMA Read NO_PASID] Request device [aa:00.0] fault addr 0x10c3a6000
[fault reason 0x90]
SM: A/D bit update needed in first-level entry when set up in no snoop
Fixes: 289b3b005cb9 ("iommu/vt-d: Preset A/D bits for user space DMA usage")
Cc: [email protected]
Signed-off-by: Tina Zhang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lu Baolu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
|
|
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed.
seq_copy_in_user() and seq_copy_in_kernel() did not have prototypes
matching snd_seq_dump_func_t. Adjust this and remove the casts. There
are not resulting binary output differences.
This was found as a result of Clang's new -Wcast-function-type-strict
flag, which is more sensitive than the simpler -Wcast-function-type,
which only checks for type width mismatches.
Reported-by: kernel test robot <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Cc: Jaroslav Kysela <[email protected]>
Cc: Takashi Iwai <[email protected]>
Cc: "Gustavo A. R. Silva" <[email protected]>
Cc: [email protected]
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
If O_EXCL is *not* specified, then linkat() can be
used to link the temporary file into the filesystem.
If O_EXCL is specified then linkat() should fail (-1).
After commit 863f144f12ad ("vfs: open inside ->tmpfile()")
the O_EXCL flag is no longer honored by the vfs layer for
tmpfile, which means the file can be linked even if O_EXCL
flag is specified, which is a change in behaviour for
userspace!
The open flags was previously passed as a parameter, so it
was uneffected by the changes to file->f_flags caused by
finish_open(). This patch fixes the issue by storing
file->f_flags in a local variable so the O_EXCL test
logic is restored.
This regression was detected by Android CTS Bionic fcntl()
tests running on android-mainline [1].
[1] https://android.googlesource.com/platform/bionic/+/
refs/heads/master/tests/fcntl_test.cpp#352
Fixes: 863f144f12ad ("vfs: open inside ->tmpfile()")
Acked-by: Miklos Szeredi <[email protected]>
Tested-by: Will McVicker <[email protected]>
Signed-off-by: Peter Griffin <[email protected]>
Signed-off-by: Al Viro <[email protected]>
|
|
'ret' is defined twice in macsec_changelink(), when it is set in macsec_is_offloaded
case, it will be invalid before return.
Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure")
Signed-off-by: YueHaibing <[email protected]>
Reviewed-by: Saeed Mahameed <[email protected]>
Reviewed-by: Antoine Tenart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Currently, we get icmp6hdr via function icmp6_hdr(), which needs the skb
transport header to be set first. But there is no rule to ask driver set
transport header before netif_receive_skb() and bond_handle_frame(). So
we will not able to get correct icmp6hdr on some drivers.
Fix this by using skb_header_pointer to get the IPv6 and ICMPV6 headers.
Reported-by: Liang Li <[email protected]>
Fixes: 4e24be018eb9 ("bonding: add new parameter ns_targets")
Suggested-by: Eric Dumazet <[email protected]>
Signed-off-by: Hangbin Liu <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Acked-by: Jay Vosburgh <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Simon Horman says:
====================
nfp: fixes for v6.1
- Ensure that information displayed by "devlink port show"
reflects the number of lanes available to be split.
- Avoid NULL dereference in ethtool test code.
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Setting of the port flag `NFP_PORT_CHANGED`, introduced
to ensure the correct reading of EEPROM data, causes a
fatal kernel NULL pointer dereference in cases where
the target netdev type cannot be determined.
Add validation of port struct pointer before attempting
to set the `NFP_PORT_CHANGED` flag. Return that operation
is not supported if the netdev type cannot be determined.
Fixes: 4ae97cae07e1 ("nfp: ethtool: fix the display error of `ethtool -m DEVNAME`")
Signed-off-by: Jaco Coetzee <[email protected]>
Reviewed-by: Louis Peens <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The error is reflected in that it shows wrong splittable status of
port when executing "devlink port show".
The reason which leads the error is that the assigned operation of
splittable is just a simple negation operation of split and it does
not consider port lanes quantity. A splittable port should have
several lanes that can be split(lanes quantity > 1).
If without the judgement, it will show wrong message for some
firmware, such as 2x25G, 2x10G.
Fixes: a0f49b548652 ("devlink: Add a new devlink port split ability attribute and pass to netlink")
Signed-off-by: Diana Wang <[email protected]>
Reviewed-by: Louis Peens <[email protected]>
Reviewed-by: Niklas Söderlund <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
As comment of pci_get_domain_bus_and_slot() says, it returns
a pci device with refcount increment, when finish using it,
the caller must decrement the reference count by calling
pci_dev_put().
In pch_gbe_probe(), pci_get_domain_bus_and_slot() is called,
so in error path in probe() and remove() function, pci_dev_put()
should be called to avoid refcount leak. Compile tested only.
Fixes: 1a0bdadb4e36 ("net/pch_gbe: supports eg20t ptp clock")
Signed-off-by: Yang Yingliang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
As comment of pci_get_domain_bus_and_slot() says, it returns
a pci device with refcount increment, when finish using it,
the caller must decrement the reference count by calling
pci_dev_put().
So before returning from rvu_dbg_rvu_pf_cgx_map_display() or
cgx_print_dmac_flt(), pci_dev_put() is called to avoid refcount
leak.
Fixes: dbc52debf95f ("octeontx2-af: Debugfs support for DMAC filters")
Fixes: e2fb37303865 ("octeontx2-af: Display CGX, NIX and PF map in debugfs.")
Signed-off-by: Yang Yingliang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The ql3xxx_send() returns NETDEV_TX_OK without freeing skb in error
handling case, add dev_kfree_skb_any() to fix it.
Fixes: bd36b0ac5d06 ("qla3xxx: Add support for Qlogic 4032 chip.")
Signed-off-by: Zhang Changzhong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
It will cause invalid pointer dereference to priv->cm3_base behind,
if PTR_ERR(priv->cm3_base) in mvpp2_get_sram().
Fixes: e54ad1e01c00 ("net: mvpp2: add CM3 SRAM memory map")
Signed-off-by: Hui Tang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
If mlx4_bitmap_init fails, mlx4_bitmap_alloc_range will dereference
the NULL pointer (bitmap->table).
Make sure, that mlx4_bitmap_alloc_range called in no error case.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: d57febe1a478 ("net/mlx4: Add A0 hybrid steering")
Reviewed-by: Tariq Toukan <[email protected]>
Signed-off-by: Peter Kosyh <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
If mtk_start_dma() fails, invoke phylink_disconnect_phy() to perform
cleanup. phylink_disconnect_phy() contains the put_device action. If
phylink_disconnect_phy is not performed, the Kref of netdev will leak.
Fixes: b8fc9f30821e ("net: ethernet: mediatek: Add basic PHYLINK support")
Signed-off-by: Liu Jian <[email protected]>
Reviewed-by: Russell King (Oracle) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|