aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-10-01cxl: fix leak of IRQ names in cxl_free_afu_irqs()Andrew Donnellan3-1/+3
cxl_free_afu_irqs() doesn't free IRQ names when it releases an AFU's IRQ ranges. The userspace API equivalent in afu_release_irqs() calls afu_irq_name_free() to release the IRQ names. Call afu_irq_name_free() in cxl_free_afu_irqs() to release the IRQ names. Make afu_irq_name_free() non-static to allow this. Reported-by: Matthew R. Ochs <[email protected]> Fixes: 6f7f0b3df6d4 ("cxl: Add AFU virtual PHB and kernel API") Signed-off-by: Andrew Donnellan <[email protected]> Signed-off-by: Ian Munsie <[email protected]> Reviewed-by: Matthew R. Ochs <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2015-09-30x86/process: Unify 32bit and 64bit implementations of get_wchan()Thomas Gleixner3-84/+55
The stack layout and the functionality is identical. Use the 64bit version for all of x86. Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Borislav Petkov <[email protected]> Reviewed-by: Dmitry Vyukov <[email protected]> Cc: Andrey Ryabinin <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Andrey Konovalov <[email protected]> Cc: Kostya Serebryany <[email protected]> Cc: Alexander Potapenko <[email protected]> Cc: kasan-dev <[email protected]> Cc: Denys Vlasenko <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Sasha Levin <[email protected]> Cc: Wolfram Gloger <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Thomas Gleixner <[email protected]>
2015-09-30x86/process: Add proper bound checks in 64bit get_wchan()Thomas Gleixner1-10/+42
Dmitry Vyukov reported the following using trinity and the memory error detector AddressSanitizer (https://code.google.com/p/address-sanitizer/wiki/AddressSanitizerForKernel). [ 124.575597] ERROR: AddressSanitizer: heap-buffer-overflow on address ffff88002e280000 [ 124.576801] ffff88002e280000 is located 131938492886538 bytes to the left of 28857600-byte region [ffffffff81282e0a, ffffffff82e0830a) [ 124.578633] Accessed by thread T10915: [ 124.579295] inlined in describe_heap_address ./arch/x86/mm/asan/report.c:164 [ 124.579295] #0 ffffffff810dd277 in asan_report_error ./arch/x86/mm/asan/report.c:278 [ 124.580137] #1 ffffffff810dc6a0 in asan_check_region ./arch/x86/mm/asan/asan.c:37 [ 124.581050] #2 ffffffff810dd423 in __tsan_read8 ??:0 [ 124.581893] #3 ffffffff8107c093 in get_wchan ./arch/x86/kernel/process_64.c:444 The address checks in the 64bit implementation of get_wchan() are wrong in several ways: - The lower bound of the stack is not the start of the stack page. It's the start of the stack page plus sizeof (struct thread_info) - The upper bound must be: top_of_stack - TOP_OF_KERNEL_STACK_PADDING - 2 * sizeof(unsigned long). The 2 * sizeof(unsigned long) is required because the stack pointer points at the frame pointer. The layout on the stack is: ... IP FP ... IP FP. So we need to make sure that both IP and FP are in the bounds. Fix the bound checks and get rid of the mix of numeric constants, u64 and unsigned long. Making all unsigned long allows us to use the same function for 32bit as well. Use READ_ONCE() when accessing the stack. This does not prevent a concurrent wakeup of the task and the stack changing, but at least it avoids TOCTOU. Also check task state at the end of the loop. Again that does not prevent concurrent changes, but it avoids walking for nothing. Add proper comments while at it. Reported-by: Dmitry Vyukov <[email protected]> Reported-by: Sasha Levin <[email protected]> Based-on-patch-from: Wolfram Gloger <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Borislav Petkov <[email protected]> Reviewed-by: Dmitry Vyukov <[email protected]> Cc: Andrey Ryabinin <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Andrey Konovalov <[email protected]> Cc: Kostya Serebryany <[email protected]> Cc: Alexander Potapenko <[email protected]> Cc: kasan-dev <[email protected]> Cc: Denys Vlasenko <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Wolfram Gloger <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Thomas Gleixner <[email protected]>
2015-09-30ASoC: sgtl5000: fix wrong register MIC_BIAS_VOLTAGE setup on probeGianluca Renzi1-2/+2
Signed-off-by: Gianluca Renzi <[email protected]> Signed-off-by: Mark Brown <[email protected]> Cc: [email protected]
2015-09-30ASoC: wm8962: balance pm_runtime_enableJiada Wang1-1/+4
pm_runtime_enable is called in probe to enable runtime PM for wm8962 codec, but pm_runtime_disable isn't called in remove callback, nor is called in error path if probe fails after runtime PM is enabled, this causes unbalanced pm_runtime_enable. This patch Adds pm_runtime_disable in remove callback and error path, to balance pm_runtime_enable. Signed-off-by: Jiada Wang <[email protected]> Acked-by: Charles Keepax <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2015-09-30Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds5-3/+13
Pull watchdog fixes from Wim Van Sebroeck: "This fixes: - module autoload for 3 OF platform drivers - poweroff behaviour on bcm2835 watchdog device - I2C dependencies for iTCO_wdt.c" * git://www.linux-watchdog.org/linux-watchdog: watchdog: iTCO: Fix dependencies on I2C watchdog: bcm2835: Fix poweroff behaviour watchdog: Fix module autoload for OF platform driver
2015-09-30Merge tag 'hwmon-for-linus-v4.3-rc4' of ↵Linus Torvalds3-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmin fixes from Guenter Roeck: "Fix module autoload for various drivers" * tag 'hwmon-for-linus-v4.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (pwm-fan) Fix module autoload for OF platform driver hwmon: (gpio-fan) Fix module autoload for OF platform driver hwmon: (abx500) Fix module autoload for OF platform driver
2015-09-30workqueue: make sure delayed work run in local cpuShaohua Li1-4/+4
My system keeps crashing with below message. vmstat_update() schedules a delayed work in current cpu and expects the work runs in the cpu. schedule_delayed_work() is expected to make delayed work run in local cpu. The problem is timer can be migrated with NO_HZ. __queue_work() queues work in timer handler, which could run in a different cpu other than where the delayed work is scheduled. The end result is the delayed work runs in different cpu. The patch makes __queue_delayed_work records local cpu earlier. Where the timer runs doesn't change where the work runs with the change. [ 28.010131] ------------[ cut here ]------------ [ 28.010609] kernel BUG at ../mm/vmstat.c:1392! [ 28.011099] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN [ 28.011860] Modules linked in: [ 28.012245] CPU: 0 PID: 289 Comm: kworker/0:3 Tainted: G W4.3.0-rc3+ #634 [ 28.013065] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140709_153802- 04/01/2014 [ 28.014160] Workqueue: events vmstat_update [ 28.014571] task: ffff880117682580 ti: ffff8800ba428000 task.ti: ffff8800ba428000 [ 28.015445] RIP: 0010:[<ffffffff8115f921>] [<ffffffff8115f921>]vmstat_update+0x31/0x80 [ 28.016282] RSP: 0018:ffff8800ba42fd80 EFLAGS: 00010297 [ 28.016812] RAX: 0000000000000000 RBX: ffff88011a858dc0 RCX:0000000000000000 [ 28.017585] RDX: ffff880117682580 RSI: ffffffff81f14d8c RDI:ffffffff81f4df8d [ 28.018366] RBP: ffff8800ba42fd90 R08: 0000000000000001 R09:0000000000000000 [ 28.019169] R10: 0000000000000000 R11: 0000000000000121 R12:ffff8800baa9f640 [ 28.019947] R13: ffff88011a81e340 R14: ffff88011a823700 R15:0000000000000000 [ 28.020071] FS: 0000000000000000(0000) GS:ffff88011a800000(0000)knlGS:0000000000000000 [ 28.020071] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 28.020071] CR2: 00007ff6144b01d0 CR3: 00000000b8e93000 CR4:00000000000006f0 [ 28.020071] Stack: [ 28.020071] ffff88011a858dc0 ffff8800baa9f640 ffff8800ba42fe00ffffffff8106bd88 [ 28.020071] ffffffff8106bd0b 0000000000000096 0000000000000000ffffffff82f9b1e8 [ 28.020071] ffffffff829f0b10 0000000000000000 ffffffff81f18460ffff88011a81e340 [ 28.020071] Call Trace: [ 28.020071] [<ffffffff8106bd88>] process_one_work+0x1c8/0x540 [ 28.020071] [<ffffffff8106bd0b>] ? process_one_work+0x14b/0x540 [ 28.020071] [<ffffffff8106c214>] worker_thread+0x114/0x460 [ 28.020071] [<ffffffff8106c100>] ? process_one_work+0x540/0x540 [ 28.020071] [<ffffffff81071bf8>] kthread+0xf8/0x110 [ 28.020071] [<ffffffff81071b00>] ?kthread_create_on_node+0x200/0x200 [ 28.020071] [<ffffffff81a6522f>] ret_from_fork+0x3f/0x70 [ 28.020071] [<ffffffff81071b00>] ?kthread_create_on_node+0x200/0x200 Signed-off-by: Shaohua Li <[email protected]> Signed-off-by: Tejun Heo <[email protected]> Cc: [email protected] # v2.6.31+
2015-09-30Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds2-6/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU fixes from Ingo Molnar: "Two RCU fixes: - work around bug with recent GCC versions. - fix false positive lockdep splat" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rcu: Suppress lockdep false positive for rcp->exp_funnel_mutex rcu: Change _wait_rcu_gp() to work around GCC bug 67055
2015-09-30Initialize msg/shm IPC objects before doing ipc_addid()Linus Torvalds3-17/+18
As reported by Dmitry Vyukov, we really shouldn't do ipc_addid() before having initialized the IPC object state. Yes, we initialize the IPC object in a locked state, but with all the lockless RCU lookup work, that IPC object lock no longer means that the state cannot be seen. We already did this for the IPC semaphore code (see commit e8577d1f0329: "ipc/sem.c: fully initialize sem_array before making it visible") but we clearly forgot about msg and shm. Reported-by: Dmitry Vyukov <[email protected]> Cc: Manfred Spraul <[email protected]> Cc: Davidlohr Bueso <[email protected]> Cc: [email protected] Signed-off-by: Linus Torvalds <[email protected]>
2015-09-30drm/amdgpu: only print meaningful VM faultsChristian König2-4/+12
Port of radeon commit 9b7d786b900baf7c0d1a7e211570aef1cb27590f. Signed-off-by: Christian König <[email protected]> Reviewed-by: Alex Deucher <[email protected]>
2015-09-30drm/amdgpu/cgs: remove import_gpu_memAlex Deucher2-56/+0
It was added for completeness, but we don't have any users for it yet. Daniel noted that it may be racy. Remove it. Change-Id: I5f5546f8911a4f294008a62dc86a73f3face38d1 Reviewed-by: Daniel Vetter <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2015-09-30usb: renesas_usbhs: Add support for R-Car H3Yoshihiro Shimoda2-0/+6
This patch adds a compatible string to support for R-Car H3. Since the HS-USB controller of R-Car H3 is almost the same specification with R-Car Gen2 (these have 16 pipes and usb-dmac), this patch sets the "type" of renesas_usbhs_driver_param to USBHS_TYPE_RCAR_GEN2. Acked-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Yoshihiro Shimoda <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2015-09-30usb: renesas_usbhs: fix build warning if 64-bit architectureYoshihiro Shimoda2-2/+2
This patch fixes the following warning if 64-bit architecture environment: ./drivers/usb/renesas_usbhs/common.c:496:25: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] dparam->type = of_id ? (u32)of_id->data : 0; Acked-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Yoshihiro Shimoda <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2015-09-30usb: gadget: bdc: fix memory leakSudip Mukherjee1-1/+3
If dma_pool_alloc() fails we are jumping to fail and releasing all the bd_tables which have been added to the chain but we missed freeing this bd_table which was just allocated and still not added to the chain of bd_table. Signed-off-by: Sudip Mukherjee <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2015-09-30MIPS: CPS: #ifdef on CONFIG_MIPS_MT_SMP rather than CONFIG_MIPS_MTPaul Burton1-4/+4
The CONFIG_MIPS_MT symbol can be selected by CONFIG_MIPS_VPE_LOADER in addition to CONFIG_MIPS_MT_SMP. We only want MT code in the CPS SMP boot vector if we're using MT for SMP. Thus switch the config symbol we ifdef against to CONFIG_MIPS_MT_SMP. Signed-off-by: Paul Burton <[email protected]> Cc: Markos Chandras <[email protected]> Cc: James Hogan <[email protected]> Cc: <[email protected]> # 3.16+ Cc: [email protected] Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/10867/ Signed-off-by: Ralf Baechle <[email protected]>
2015-09-30MIPS: CPS: Don't include MT code in non-MT kernels.Paul Burton1-0/+2
The MT-specific code in mips_cps_boot_vpes can safely be omitted from kernels which don't support MT, with the default VPE==0 case being used as it would be after the has_mt (Config3.MT) check failed at runtime. Discarding the code entirely will save us a few bytes & allow cleaner handling of MT ASE instructions by later patches. Signed-off-by: Paul Burton <[email protected]> Cc: Markos Chandras <[email protected]> Cc: James Hogan <[email protected]> Cc: <[email protected]> # 3.16+ Cc: [email protected] Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/10866/ Signed-off-by: Ralf Baechle <[email protected]>
2015-09-30MIPS: CPS: Stop dangling delay slot from has_mt.Paul Burton1-2/+2
The has_mt macro ended with a branch, leaving its callers with a delay slot that would be executed if Config3.MT is not set. However it would not be executed if Config3 (or earlier Config registers) don't exist which makes it somewhat inconsistent at best. Fill the delay slot in the macro & fix the mips_cps_boot_vpes caller appropriately. Signed-off-by: Paul Burton <[email protected]> Cc: Markos Chandras <[email protected]> Cc: James Hogan <[email protected]> Cc: <[email protected]> # 3.16+ Cc: [email protected] Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/10865/ Signed-off-by: Ralf Baechle <[email protected]>
2015-09-30MIPS: dma-default: Fix 32-bit fall back to GFP_DMAJames Hogan1-1/+1
If there is a DMA zone (usually 24bit = 16MB I believe), but no DMA32 zone, as is the case for some 32-bit kernels, then massage_gfp_flags() will cause DMA memory allocated for devices with a 32..63-bit coherent_dma_mask to fall back to using __GFP_DMA, even though there may only be 32-bits of physical address available anyway. Correct that case to compare against a mask the size of phys_addr_t instead of always using a 64-bit mask. Signed-off-by: James Hogan <[email protected]> Fixes: a2e715a86c6d ("MIPS: DMA: Fix computation of DMA flags from device's coherent_dma_mask.") Cc: Ralf Baechle <[email protected]> Cc: [email protected] Cc: <[email protected]> # 2.6.36+ Patchwork: https://patchwork.linux-mips.org/patch/9610/ Signed-off-by: Ralf Baechle <[email protected]>
2015-09-30s390/vtime: correct scaled cputime of partially idle CPUsMartin Schwidefsky3-30/+67
The calculation for the SMT scaling factor for a hardware thread which has been partially idle needs to disregard the cycles spent by the other threads of the core while the thread is idle. Signed-off-by: Martin Schwidefsky <[email protected]>
2015-09-30drm/i915: Call non-locking version of drm_kms_helper_poll_enable(), v2Egbert Eich1-1/+1
drm_kms_helper_poll_enable() is called from a context in intel_hpd_irq_storm_disable() where the the mode_config mutex is already locked. When this function was converted to lock this mutex in commit 8c4ccc4ab6f6 ("drm/probe-helper: Grab mode_config.mutex in poll_init/enable") a deadlock occurred. Call the newly implemented non-locking version of this function. Changes since v1: - use function name suffix '_locked' for the function that is to be called from a locked context. Signed-off-by: Egbert Eich <[email protected]> Reviewed-by: Daniel Vetter <[email protected]> Signed-off-by: Jani Nikula <[email protected]>
2015-09-30drm: Add a non-locking version of drm_kms_helper_poll_enable(), v2Egbert Eich2-3/+17
drm_kms_helper_poll_enable() was converted to lock the mode_config mutex in commit 8c4ccc4ab6f64e859d4ff8d7c02c2ed2e956e07f ("drm/probe-helper: Grab mode_config.mutex in poll_init/enable"). This disregarded the cases where this function is called from a context where this mutex is already locked. Add a non-locking version as well. Changes since v1: - use function name suffix '_locked' for the function that is to be called from a locked context. Signed-off-by: Egbert Eich <[email protected]> Reviewed-by: Daniel Vetter <[email protected]> Signed-off-by: Jani Nikula <[email protected]>
2015-09-30mmc: core: fix dead loop of mmc_retuneChaotian Jing1-2/+4
When get a CRC error, start the mmc_retune, it will issue CMD19/CMD21 to do tune, assume there were 10 clock phase need to try, phase 0 to phase 6 is ok, phase 7 to phase 9 is NG, we try it from 0 to 9, so the last CMD19/CMD21 will get CRC error, host->need_retune was set and cause mmc_retune was called, then dead loop of mmc_retune Signed-off-by: Chaotian Jing <[email protected]> Acked-by: Adrian Hunter <[email protected]> Fixes: bd11e8bd03ca ("mmc: core: Flag re-tuning is needed on CRC errors") Signed-off-by: Ulf Hansson <[email protected]>
2015-09-30drm/vmwgfx: Fix a command submission hang regressionThomas Hellstrom1-0/+8
When we're out of command buffer space, we turn on the command buffer processed irq without re-checking for finished command buffers afterwards. This might lead to a missed irq and the command submission process waiting forever for space. Fix this by rerunning the command buffer submission handler whenever we're out of command space. This ensures both that we don't needlessly turn on the irq, and that if we decide to turn on the irq, we recheck for finished command buffers before going to sleep. Reported-and-tested-by: Bryan Li <[email protected]> Signed-off-by: Thomas Hellstrom <[email protected]> Reviewed-by: Sinclair Yeh <[email protected]>
2015-09-30MIPS: Wire up userfaultfd and membarrier syscalls.Ralf Baechle5-6/+20
Signed-off-by: Ralf Baechle <[email protected]>
2015-09-30dmaengine: dw: properly read DWC_PARAMS registerAndy Shevchenko1-2/+2
In case we have less than maximum allowed channels (8) and autoconfiguration is enabled the DWC_PARAMS read is wrong because it uses different arithmetic to what is needed for channel priority setup. Re-do the caclulations properly. This now works on AVR32 board well. Fixes: fed2574b3c9f (dw_dmac: introduce software emulation of LLP transfers) Cc: [email protected] Signed-off-by: Andy Shevchenko <[email protected]> Signed-off-by: Vinod Koul <[email protected]>
2015-09-30drm/exynos: remove unused mode_fixup() codeGustavo Padovan2-19/+0
CRTC's mode_fixup() isn't used anymore in exynos, remove it. Signed-off-by: Gustavo Padovan <[email protected]> Signed-off-by: Inki Dae <[email protected]>
2015-09-30drm/exynos: remove decon_mode_fixup()Gustavo Padovan1-12/+0
The only thing mode_fixup was doing was set the adjusted_mode->vrefresh to 60, but it already has the value of 60 when the decon_mode_fixup() is called. That means this call is actually pointless and can be removed. Signed-off-by: Gustavo Padovan <[email protected]> Signed-off-by: Inki Dae <[email protected]>
2015-09-30drm/exynos: remove fimd_mode_fixup()Gustavo Padovan1-12/+0
The only thing mode_fixup was doing was set the adjusted_mode->vrefresh to 60, but it already has the value of 60 when the fimd_mode_fixup() is called. That means this call is actually pointless and can be removed. Signed-off-by: Gustavo Padovan <[email protected]> Signed-off-by: Inki Dae <[email protected]>
2015-09-30dmaengine: xgene-dma: Fix overwritting DMA tx ringRameshwar Prasad Sahu1-26/+11
This patch fixes an over flow issue with the TX ring descriptor. Each descriptor is 32B in size and an operation requires 2 of these descriptors. Signed-off-by: Rameshwar Prasad Sahu <[email protected]> Signed-off-by: Vinod Koul <[email protected]>
2015-09-30dmaengine: fix balance of privatecntPeter Ujfalusi1-1/+9
dma_release_channel() decrements privatecnt counter and almost all dma_get* function increments it with the exception of dma_get_slave_channel(). In most cases this does not cause issue since normally the channel is not requested and released, but if a driver requests DMA channel via dma_get_slave_channel() and releases the channel the privatecnt will be unbalanced and this will prevent for example getting channel for memcpy. Signed-off-by: Peter Ujfalusi <[email protected]> Signed-off-by: Vinod Koul <[email protected]>
2015-09-30drm/exynos: rotator: Clock control is unused if !PMThierry Reding1-1/+1
Protect the rotator_clk_crtl() function with an #ifdef CONFIG_PM guard to avoid "defined but not used" warnings. Signed-off-by: Thierry Reding <[email protected]> Reviewed-by: Andrzej Hajda <[email protected]> Signed-off-by: Inki Dae <[email protected]>
2015-09-30drm/exynos: fimc: Clock control is unused if !PMThierry Reding1-18/+18
Protect the fimc_clk_ctrl() function with an #ifdef CONFIG_PM guard to avoid "defined but not used" warnings. Signed-off-by: Thierry Reding <[email protected]> Reviewed-by: Andrzej Hajda <[email protected]> Signed-off-by: Inki Dae <[email protected]>
2015-09-30drm/exynos: Suspend/resume is unused if !PMThierry Reding1-0/+2
Protect the suspend and resume callbacks with an #ifdef CONFIG_PM_SLEEP guard to avoid "defined but not used" warnings. Signed-off-by: Thierry Reding <[email protected]> Signed-off-by: Inki Dae <[email protected]>
2015-09-30drm/exynos: create a fake mmap offset with gem creationJoonyoung Shim1-5/+7
Don't create a fake mmap offset in exynos_drm_gem_dumb_map_offset. If not, it will call drm_gem_create_mmap_offset whenever user requests DRM_IOCTL_MODE_MAP_DUMB ioctl. Signed-off-by: Joonyoung Shim <[email protected]> Signed-off-by: Inki Dae <[email protected]>
2015-09-30drm/exynos: remove call to drm_gem_free_mmap_offset()Joonyoung Shim1-3/+0
The drm_gem_object_release() function already performs this cleanup, so there is no reason to do it explicitly. Signed-off-by: Joonyoung Shim <[email protected]> Signed-off-by: Inki Dae <[email protected]>
2015-09-30drm/exynos: Remove useless EXPORT_SYMBOL_GPLsDaniel Kurtz2-9/+0
All the user of these functions are inside exynos-drm driver and you don't need to export the symbols for that case. Signed-off-by: Daniel Kurtz <[email protected]> Signed-off-by: Gustavo Padovan <[email protected]> Signed-off-by: Inki Dae <[email protected]>
2015-09-30drm/exynos: cleanup line feed in exynos_drm_gem_get_ioctlJoonyoung Shim1-1/+2
The beginning of statement in function is next line of a brace. Signed-off-by: Joonyoung Shim <[email protected]> Signed-off-by: Inki Dae <[email protected]>
2015-09-30drm/exynos: cleanup function calling written twiceJoonyoung Shim1-33/+23
By if statment, some function callings are written twice. It needs several line feed by indentation in if statment. Make to one function calling from outside if statment. Signed-off-by: Joonyoung Shim <[email protected]> Signed-off-by: Inki Dae <[email protected]>
2015-09-30drm/exynos: staticize exynos_drm_gem_init()Joonyoung Shim2-6/+1
The exynos_drm_gem_init() is used only in exynos_drm_gem.c file. Make it static and don't export it. Signed-off-by: Joonyoung Shim <[email protected]> Signed-off-by: Inki Dae <[email protected]>
2015-09-30drm/exynos: remove unnecessary NULL assignmentJoonyoung Shim1-3/+0
They will be freed right or was freed already, so NULL assignment is unnecessary. Signed-off-by: Joonyoung Shim <[email protected]> Signed-off-by: Inki Dae <[email protected]>
2015-09-30drm/exynos: fix missed calling of drm_prime_gem_destroy()Joonyoung Shim2-4/+7
When obj->import_attach is existed, code calling drm_prime_gem_destroy() was removed from commit 67e93c808b48 ("drm/exynos: stop copying sg table"), and it's a fault. The drm_prime_gem_destroy() is cleanup function which GEM drivers need to call when they use drm_gem_prime_import() to import dma-bufs, so exynos-drm driver using drm_gem_prime_import() needs calling drm_prime_gem_destroy(). Signed-off-by: Joonyoung Shim <[email protected]> Signed-off-by: Inki Dae <[email protected]>
2015-09-30drm/exynos: fix layering violation of addressJoonyoung Shim1-1/+2
There is no guarantee that DMA addresses are the same as physical addresses, but dma_to_pfn() knows how to convert a dma_addr_t to a PFN which can then be converted to a struct page. Suggested-by: Russell King <[email protected]> Signed-off-by: Joonyoung Shim <[email protected]> Signed-off-by: Inki Dae <[email protected]>
2015-09-30fbdev: broadsheetfb: fix memory leakSudip Mukherjee1-3/+5
We have requested the firmware and it was loaded but we missed releasing it both on success and error. Signed-off-by: Sudip Mukherjee <[email protected]> Signed-off-by: Tomi Valkeinen <[email protected]>
2015-09-30x86, efi, kasan: Fix build failure on !KASAN && KMEMCHECK=y kernelsAndrey Ryabinin1-0/+2
With KMEMCHECK=y, KASAN=n we get this build failure: arch/x86/platform/efi/efi.c:673:3: error: implicit declaration of function ‘memcpy’ [-Werror=implicit-function-declaration] arch/x86/platform/efi/efi_64.c:139:2: error: implicit declaration of function ‘memcpy’ [-Werror=implicit-function-declaration] arch/x86/include/asm/desc.h:121:2: error: implicit declaration of function ‘memcpy’ [-Werror=implicit-function-declaration] Don't #undef memcpy if KASAN=n. Reported-by: Ingo Molnar <[email protected]> Reported-by: Sedat Dilek <[email protected]> Signed-off-by: Andrey Ryabinin <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Matt Fleming <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Fixes: 769a8089c1fd ("x86, efi, kasan: #undef memset/memcpy/memmove per arch") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2015-09-30Merge tag 'v4.3-rc3' into x86/urgent, before applying dependent fixIngo Molnar434-2576/+4956
Signed-off-by: Ingo Molnar <[email protected]>
2015-09-30dmaengine: sun4i: fix unsafe list iterationEmilio López1-3/+3
Currently, sun4i_dma_free_contract iterates over lists and frees memory as it goes through them, causing reads to recently freed memory to be performed. Fix this by using the safe version of the iterator, so freed memory is not referenced at all. Reported-by: Dan Carpenter <[email protected]> Signed-off-by: Emilio López <[email protected]> Acked-by: Maxime Ripard <[email protected]> Signed-off-by: Vinod Koul <[email protected]>
2015-09-30Merge tag 'samsung-fixes-4.3' of http://github.com/krzk/linux into ↵Kukjin Kim4-2/+34
v4.3-samsung-fixes Fixes for Exynos (DT and mach code): 1. Finally fix booting of all 8 cores on Exynos Octa (Exynos542x): all 8 cores are booting and can be used. The fix, based on vendor code and bootloader behavior, is as for time being only for MCPM enabled path. 2. Fix thermal boot issue on SMDK5250. 3. Fix invalid clock used for FIMD IOMMU.
2015-09-30x86/hyperv: Fix the build in the !CONFIG_KEXEC_CORE caseVitaly Kuznetsov1-5/+7
Recent changes in the Hyper-V driver: b4370df2b1f5 ("Drivers: hv: vmbus: add special crash handler") broke the build when CONFIG_KEXEC_CORE is not set: arch/x86/built-in.o: In function `hv_machine_crash_shutdown': arch/x86/kernel/cpu/mshyperv.c:112: undefined reference to `native_machine_crash_shutdown' Decorate all kexec related code with #ifdef CONFIG_KEXEC_CORE. Reported-by: Jim Davis <[email protected]> Reported-by: Stephen Hemminger <[email protected]> Signed-off-by: Vitaly Kuznetsov <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: K. Y. Srinivasan <[email protected]> Cc: Haiyang Zhang <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Linus Torvalds <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2015-09-30PM / devfreq: Fix governor_store()Tobias Jakobi1-1/+3
Writing the currently set governor into sysfs currently seems to fail. Fix this by setting the return code to zero before leaving governor_store(). Signed-off-by: Tobias Jakobi <[email protected]> Signed-off-by: MyungJoo Ham <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.