Age | Commit message (Collapse) | Author | Files | Lines |
|
Eric Dumazet says:
====================
mptcp: better validation of MPTCPOPT_MP_JOIN option
Based on a syzbot report (see 4th patch in the series).
We need to be more explicit about which one of the
following flag is set by mptcp_parse_option():
- OPTION_MPTCP_MPJ_SYN
- OPTION_MPTCP_MPJ_SYNACK
- OPTION_MPTCP_MPJ_ACK
Then select the appropriate values instead of OPTIONS_MPTCP_MPJ
Paolo suggested to do the same for OPTIONS_MPTCP_MPC (5th patch)
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
OPTIONS_MPTCP_MPC is a combination of three flags.
It would be better to be strict about testing what
flag is expected, at least for code readability.
mptcp_parse_option() already makes the distinction.
- subflow_check_req() should use OPTION_MPTCP_MPC_SYN.
- mptcp_subflow_init_cookie_req() should use OPTION_MPTCP_MPC_ACK.
- subflow_finish_connect() should use OPTION_MPTCP_MPC_SYNACK
- subflow_syn_recv_sock should use OPTION_MPTCP_MPC_ACK
Suggested-by: Paolo Abeni <[email protected]>
Signed-off-by: Eric Dumazet <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Acked-by: Paolo Abeni <[email protected]>
Reviewed-by: Mat Martineau <[email protected]>
Fixes: 74c7dfbee3e1 ("mptcp: consolidate in_opt sub-options fields in a bitmask")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
syzbot reported that subflow_check_req() was using uninitialized data in
subflow_check_req() [1]
This is because mp_opt.token is only set when OPTION_MPTCP_MPJ_SYN is also set.
While we are are it, fix mptcp_subflow_init_cookie_req()
to test for OPTION_MPTCP_MPJ_ACK.
[1]
BUG: KMSAN: uninit-value in subflow_token_join_request net/mptcp/subflow.c:91 [inline]
BUG: KMSAN: uninit-value in subflow_check_req+0x1028/0x15d0 net/mptcp/subflow.c:209
subflow_token_join_request net/mptcp/subflow.c:91 [inline]
subflow_check_req+0x1028/0x15d0 net/mptcp/subflow.c:209
subflow_v6_route_req+0x269/0x410 net/mptcp/subflow.c:367
tcp_conn_request+0x153a/0x4240 net/ipv4/tcp_input.c:7164
subflow_v6_conn_request+0x3ee/0x510
tcp_rcv_state_process+0x2e1/0x4ac0 net/ipv4/tcp_input.c:6659
tcp_v6_do_rcv+0x11bf/0x1fe0 net/ipv6/tcp_ipv6.c:1669
tcp_v6_rcv+0x480b/0x4fb0 net/ipv6/tcp_ipv6.c:1900
ip6_protocol_deliver_rcu+0xda6/0x2a60 net/ipv6/ip6_input.c:438
ip6_input_finish net/ipv6/ip6_input.c:483 [inline]
NF_HOOK include/linux/netfilter.h:314 [inline]
ip6_input+0x15d/0x430 net/ipv6/ip6_input.c:492
dst_input include/net/dst.h:461 [inline]
ip6_rcv_finish+0x5db/0x870 net/ipv6/ip6_input.c:79
NF_HOOK include/linux/netfilter.h:314 [inline]
ipv6_rcv+0xda/0x390 net/ipv6/ip6_input.c:310
__netif_receive_skb_one_core net/core/dev.c:5532 [inline]
__netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5646
netif_receive_skb_internal net/core/dev.c:5732 [inline]
netif_receive_skb+0x58/0x660 net/core/dev.c:5791
tun_rx_batched+0x3ee/0x980 drivers/net/tun.c:1555
tun_get_user+0x53af/0x66d0 drivers/net/tun.c:2002
tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048
call_write_iter include/linux/fs.h:2020 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x8ef/0x1490 fs/read_write.c:584
ksys_write+0x20f/0x4c0 fs/read_write.c:637
__do_sys_write fs/read_write.c:649 [inline]
__se_sys_write fs/read_write.c:646 [inline]
__x64_sys_write+0x93/0xd0 fs/read_write.c:646
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
Local variable mp_opt created at:
subflow_check_req+0x6d/0x15d0 net/mptcp/subflow.c:145
subflow_v6_route_req+0x269/0x410 net/mptcp/subflow.c:367
CPU: 1 PID: 5924 Comm: syz-executor.3 Not tainted 6.7.0-rc8-syzkaller-00055-g5eff55d725a4 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023
Fixes: f296234c98a8 ("mptcp: Add handling of incoming MP_JOIN requests")
Reported-by: syzbot <[email protected]>
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Florian Westphal <[email protected]>
Cc: Peter Krystad <[email protected]>
Cc: Matthieu Baerts <[email protected]>
Cc: Mat Martineau <[email protected]>
Cc: Geliang Tang <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Acked-by: Paolo Abeni <[email protected]>
Reviewed-by: Mat Martineau <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
subflow_finish_connect() uses four fields (backup, join_id, thmac, none)
that may contain garbage unless OPTION_MPTCP_MPJ_SYNACK has been set
in mptcp_parse_option()
Fixes: f296234c98a8 ("mptcp: Add handling of incoming MP_JOIN requests")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Florian Westphal <[email protected]>
Cc: Peter Krystad <[email protected]>
Cc: Matthieu Baerts <[email protected]>
Cc: Mat Martineau <[email protected]>
Cc: Geliang Tang <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Acked-by: Paolo Abeni <[email protected]>
Reviewed-by: Mat Martineau <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
mp_opt->hmac contains uninitialized data unless OPTION_MPTCP_MPJ_ACK
was set in mptcp_parse_option().
We must refine the condition before we call subflow_hmac_valid().
Fixes: f296234c98a8 ("mptcp: Add handling of incoming MP_JOIN requests")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Florian Westphal <[email protected]>
Cc: Peter Krystad <[email protected]>
Cc: Matthieu Baerts <[email protected]>
Cc: Mat Martineau <[email protected]>
Cc: Geliang Tang <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Acked-by: Paolo Abeni <[email protected]>
Reviewed-by: Mat Martineau <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
mptcp_parse_option() currently sets OPTIONS_MPTCP_MPJ, for the three
possible cases handled for MPTCPOPT_MP_JOIN option.
OPTIONS_MPTCP_MPJ is the combination of three flags:
- OPTION_MPTCP_MPJ_SYN
- OPTION_MPTCP_MPJ_SYNACK
- OPTION_MPTCP_MPJ_ACK
This is a problem, because backup, join_id, token, nonce and/or hmac fields
could be left uninitialized in some cases.
Distinguish the three cases, as following patches will need this step.
Fixes: f296234c98a8 ("mptcp: Add handling of incoming MP_JOIN requests")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Florian Westphal <[email protected]>
Cc: Peter Krystad <[email protected]>
Cc: Matthieu Baerts <[email protected]>
Cc: Mat Martineau <[email protected]>
Cc: Geliang Tang <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Acked-by: Paolo Abeni <[email protected]>
Reviewed-by: Mat Martineau <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat updates from Namjae Jeon:
- Replace the internal table lookup algorithm with the hweight library
and ffs of the bitops library.
- Handle the two types of stream entry, valid data size (has been
written) and data size separately. It improves compatibility with two
differently sized files created on Windows.
* tag 'exfat-for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: do not zero the extended part
exfat: change to get file size from DataLength
exfat: using ffs instead of internal logic
exfat: using hweight instead of internal logic
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull bcachefs locking fix from Al Viro:
"Fix broken locking in bch2_ioctl_subvolume_destroy()"
* tag 'pull-bcachefs-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
bch2_ioctl_subvolume_destroy(): fix locking
new helper: user_path_locked_at()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull nfsctl update from Al Viro:
"More simple_recursive_removal() conversions.
nfsctl this time..."
* tag 'pull-simple_recursive_removal' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
nfsctl: switch to simple_recursive_removal()
|
|
When compiling with clang-18 and W=1, I've noticed the following
warnings:
drivers/net/ethernet/cavium/liquidio/cn23xx_pf_device.c:1493:16: warning: cast
from 'void (*)(struct octeon_device *, struct octeon_mbox_cmd *, void *)' to
'octeon_mbox_callback_t' (aka 'void (*)(void *, void *, void *)') converts to
incompatible function type [-Wcast-function-type-strict]
1493 | mbox_cmd.fn = (octeon_mbox_callback_t)cn23xx_get_vf_stats_callback;
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
and:
drivers/net/ethernet/cavium/liquidio/cn23xx_vf_device.c:432:16: warning: cast
from 'void (*)(struct octeon_device *, struct octeon_mbox_cmd *, void *)' to
'octeon_mbox_callback_t' (aka 'void (*)(void *, void *, void *)') converts to
incompatible function type [-Wcast-function-type-strict]
432 | mbox_cmd.fn = (octeon_mbox_callback_t)octeon_pfvf_hs_callback;
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix both of the above by adjusting 'octeon_mbox_callback_t' to match actual
callback definitions (at the cost of adding an extra forward declaration).
Signed-off-by: Dmitry Antipov <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Pull RCU updates from Neeraj Upadhyay:
- Documentation and comment updates
- RCU torture, locktorture updates that include cleanups; nolibc init
build support for mips, ppc and rv64; testing of mid stall duration
scenario and fixing fqs task creation conditions
- Misc fixes, most notably restricting usage of RCU CPU stall
notifiers, to confine their usage primarily to debug kernels
- RCU tasks minor fixes
- lockdep annotation fix for NMI-safe accesses, callback
advancing/acceleration cleanup and documentation improvements
* tag 'rcu.release.v6.8' of https://github.com/neeraju/linux:
rcu: Force quiescent states only for ongoing grace period
doc: Clarify historical disclaimers in memory-barriers.txt
doc: Mention address and data dependencies in rcu_dereference.rst
doc: Clarify RCU Tasks reader/updater checklist
rculist.h: docs: Fix wrong function summary
Documentation: RCU: Remove repeated word in comments
srcu: Use try-lock lockdep annotation for NMI-safe access.
srcu: Explain why callbacks invocations can't run concurrently
srcu: No need to advance/accelerate if no callback enqueued
srcu: Remove superfluous callbacks advancing from srcu_gp_start()
rcu: Remove unused macros from rcupdate.h
rcu: Restrict access to RCU CPU stall notifiers
rcu-tasks: Mark RCU Tasks accesses to current->rcu_tasks_idle_cpu
rcutorture: Add fqs_holdoff check before fqs_task is created
rcutorture: Add mid-sized stall to TREE07
rcutorture: add nolibc init support for mips, ppc and rv64
locktorture: Increase Hamming distance between call_rcu_chain and rcu_call_chains
|
|
While testing UFFDIO_MOVE ioctl, syzbot triggered VM_BUG_ON_PAGE caused by
a call to PageAnonExclusive() with a huge_zero_page as a parameter.
UFFDIO_MOVE does not yet handle zeropages and returns EBUSY when one is
encountered. Add an early huge_zero_page check in the PMD move path to
avoid this situation.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: adef440691ba ("userfaultfd: UFFDIO_MOVE uABI")
Reported-by: [email protected]
Signed-off-by: Suren Baghdasaryan <[email protected]>
Acked-by: David Hildenbrand <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Cc: Peter Xu <[email protected]>
Cc: Stephen Rothwell <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Since the shrinker-related code has been moved to a separate shrinker.c
file, it's time to add a MAINTAINERS entry for it.
Dave, Roman, Muchun and I have all worked on shrinker (development,
review, etc) in the past period of time, and all of us are willing to
continue working on shrinker in the future, so I'd like to add all of us
as maintainer/reviewer.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Qi Zheng <[email protected]>
Cc: Dave Chinner <[email protected]>
Cc: Muchun Song <[email protected]>
Cc: Roman Gushchin <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
The kernel sefltest mm/hugepage-vmemmap fails on architectures which has
different page size other than 4K. In hugepage-vmemmap page size used is
4k so the pfn calculation will go wrong on systems which has different
page size .The length of MAP_HUGETLB memory must be hugepage aligned but
in hugepage-vmemmap map length is 2M so this will not get aligned if the
system has differnet hugepage size.
Added psize() to get the page size and default_huge_page_size() to
get the default hugepage size at run time, hugepage-vmemmap test pass
on powerpc with 64K page size and x86 with 4K page size.
Result on powerpc without patch (page size 64K)
*# ./hugepage-vmemmap
Returned address is 0x7effff000000 whose pfn is 0
Head page flags (100000000) is invalid
check_page_flags: Invalid argument
*#
Result on powerpc with patch (page size 64K)
*# ./hugepage-vmemmap
Returned address is 0x7effff000000 whose pfn is 600
*#
Result on x86 with patch (page size 4K)
*# ./hugepage-vmemmap
Returned address is 0x7fc7c2c00000 whose pfn is 1dac00
*#
Link: https://lkml.kernel.org/r/3b3a3ae37ba21218481c482a872bbf7526031600.1704865754.git.donettom@linux.vnet.ibm.com
Fixes: b147c89cd429 ("selftests: vm: add a hugetlb test case")
Signed-off-by: Donet Tom <[email protected]>
Reported-by: Geetika Moolchandani <[email protected]>
Tested-by: Geetika Moolchandani <[email protected]>
Acked-by: Muchun Song <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
set_memmap_mode() stores the kernel parameter memmap mode as an integer.
However, the get_memmap_mode() function utilizes param_get_bool() to fetch
the value as a boolean, leading to potential endianness issue. On
Big-endian architectures, the memmap_on_memory is consistently displayed
as 'N' regardless of its actual status.
To address this endianness problem, the solution involves obtaining the
mode as an integer. This adjustment ensures the proper display of the
memmap_on_memory parameter, presenting it as one of the following options:
Force, Y, or N.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 2d1f649c7c08 ("mm/memory_hotplug: support memmap_on_memory when memmap is not aligned to pageblocks")
Signed-off-by: Sumanth Korikkar <[email protected]>
Suggested-by: Gerald Schaefer <[email protected]>
Acked-by: David Hildenbrand <[email protected]>
Cc: Alexander Gordeev <[email protected]>
Cc: Aneesh Kumar K.V <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Oscar Salvador <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Cc: <[email protected]> [6.6+]
Signed-off-by: Andrew Morton <[email protected]>
|
|
Access to the [email protected] email will be revoked upon the end of the
internship.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Tanzir Hasan <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Reviewed-by: Justin Stitt <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Add my old email addresses so that git send-email will map them
to my current email address.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Randy Dunlap <[email protected]>
Cc: Andrew Morton <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
sparse warnings:
kernel/crash_core.c:749:1: sparse: sparse: symbol '__crash_hotplug_lock' was not declared. Should it be static?
Fixes: e2a8f20dd8e9 ("Crash: add lock to serialize crash hotplug handling")
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Cc: Baoquan He <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
If the system has no mirrored memory or uses crashkernel.high while
kernelcore=mirror is enabled on the command line then during crashkernel,
there will be limited mirrored memory and this usually leads to OOM.
To solve this problem, disable the mirror feature during crashkernel.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Ma Wupeng <[email protected]>
Acked-by: Mike Rapoport (IBM) <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
syscore_shutdown() runs driver and module callbacks to get the system into
a state where it can be correctly shut down. In commit 6f389a8f1dd2 ("PM
/ reboot: call syscore_shutdown() after disable_nonboot_cpus()")
syscore_shutdown() was removed from kernel_restart_prepare() and hence got
(incorrectly?) removed from the kexec flow. This was innocuous until
commit 6735150b6997 ("KVM: Use syscore_ops instead of reboot_notifier to
hook restart/shutdown") changed the way that KVM registered its shutdown
callbacks, switching from reboot notifiers to syscore_ops.shutdown. As
syscore_shutdown() is missing from kexec, KVM's shutdown hook is not run
and virtualisation is left enabled on the boot CPU which results in triple
faults when switching to the new kernel on Intel x86 VT-x with VMXE
enabled.
Fix this by adding syscore_shutdown() to the kexec sequence. In terms of
where to add it, it is being added after migrating the kexec task to the
boot CPU, but before APs are shut down. It is not totally clear if this
is the best place: in commit 6f389a8f1dd2 ("PM / reboot: call
syscore_shutdown() after disable_nonboot_cpus()") it is stated that
"syscore_ops operations should be carried with one CPU on-line and
interrupts disabled." APs are only offlined later in machine_shutdown(),
so this syscore_shutdown() is being run while APs are still online. This
seems to be the correct place as it matches where syscore_shutdown() is
run in the reboot and halt flows - they also run it before APs are shut
down. The assumption is that the commit message in commit 6f389a8f1dd2
("PM / reboot: call syscore_shutdown() after disable_nonboot_cpus()") is
no longer valid.
KVM has been discussed here as it is what broke loudly by not having
syscore_shutdown() in kexec, but this change impacts more than just KVM;
all drivers/modules which register a syscore_ops.shutdown callback will
now be invoked in the kexec flow. Looking at some of them like x86 MCE it
is probably more correct to also shut these down during kexec.
Maintainers of all drivers which use syscore_ops.shutdown are added on CC
for visibility. They are:
arch/powerpc/platforms/cell/spu_base.c .shutdown = spu_shutdown,
arch/x86/kernel/cpu/mce/core.c .shutdown = mce_syscore_shutdown,
arch/x86/kernel/i8259.c .shutdown = i8259A_shutdown,
drivers/irqchip/irq-i8259.c .shutdown = i8259A_shutdown,
drivers/irqchip/irq-sun6i-r.c .shutdown = sun6i_r_intc_shutdown,
drivers/leds/trigger/ledtrig-cpu.c .shutdown = ledtrig_cpu_syscore_shutdown,
drivers/power/reset/sc27xx-poweroff.c .shutdown = sc27xx_poweroff_shutdown,
kernel/irq/generic-chip.c .shutdown = irq_gc_shutdown,
virt/kvm/kvm_main.c .shutdown = kvm_shutdown,
This has been tested by doing a kexec on x86_64 and aarch64.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 6735150b6997 ("KVM: Use syscore_ops instead of reboot_notifier to hook restart/shutdown")
Signed-off-by: James Gowans <[email protected]>
Cc: Baoquan He <[email protected]>
Cc: Eric Biederman <[email protected]>
Cc: Paolo Bonzini <[email protected]>
Cc: Sean Christopherson <[email protected]>
Cc: Marc Zyngier <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Chen-Yu Tsai <[email protected]>
Cc: Jernej Skrabec <[email protected]>
Cc: Samuel Holland <[email protected]>
Cc: Pavel Machek <[email protected]>
Cc: Sebastian Reichel <[email protected]>
Cc: Orson Zhai <[email protected]>
Cc: Alexander Graf <[email protected]>
Cc: Jan H. Schoenherr <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Remove the map for Linaro id as it is still in use and I want to use it
for submitting patches. Otherwise, git uses kernel.org as the author id
for patches created using Linaro id.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Manivannan Sadhasivam <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Move mmu notification mechanism inside mm lock to prevent race condition
in other components which depend on it. The notifier will invalidate
memory range. Depending upon the number of iterations, different memory
ranges would be invalidated.
The following warning would be removed by this patch:
WARNING: CPU: 0 PID: 5067 at arch/x86/kvm/../../../virt/kvm/kvm_main.c:734 kvm_mmu_notifier_change_pte+0x860/0x960 arch/x86/kvm/../../../virt/kvm/kvm_main.c:734
There is no behavioural and performance change with this patch when
there is no component registered with the mmu notifier.
[[email protected]: narrow the scope of `range', per Sean]
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 52526ca7fdb9 ("fs/proc/task_mmu: implement IOCTL to get and optionally clear info about PTEs")
Signed-off-by: Muhammad Usama Anjum <[email protected]>
Reported-by: [email protected]
Link: https://lore.kernel.org/all/[email protected]/
Reviewed-by: Sean Christopherson <[email protected]>
Cc: Andrei Vagin <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Kefeng Wang <[email protected]>
Cc: Liam R. Howlett <[email protected]>
Cc: Michał Mirosław <[email protected]>
Cc: Peter Xu <[email protected]>
Cc: Ryan Roberts <[email protected]>
Cc: Stephen Rothwell <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Yosry, Nhat and I have been doing most of the recent development and
reviewing of changes in this space.
Signed-off-by: Johannes Weiner <[email protected]>
Acked-by: Nhat Pham <[email protected]>
Acked-by: Yosry Ahmed <[email protected]>
Acked-by: Dan Streetman <[email protected]>
Acked-by: Seth Jennings <[email protected]>
Cc: Vitaly Wool <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
GNU's addr2line can have problems parsing a vmlinux built with LLVM,
particularly when LTO was used. In order to decode the traces correctly
this patch adds the ability to switch to LLVM's utilities readelf and
addr2line. The same approach is followed by Will in [1].
Before:
$ scripts/decode_stacktrace.sh vmlinux < kernel.log
[17716.240635] Call trace:
[17716.240646] skb_cow_data (??:?)
[17716.240654] esp6_input (ld-temp.o:?)
[17716.240666] xfrm_input (ld-temp.o:?)
[17716.240674] xfrm6_rcv (??:?)
[...]
After:
$ LLVM=1 scripts/decode_stacktrace.sh vmlinux < kernel.log
[17716.240635] Call trace:
[17716.240646] skb_cow_data (include/linux/skbuff.h:2172 net/core/skbuff.c:4503)
[17716.240654] esp6_input (net/ipv6/esp6.c:977)
[17716.240666] xfrm_input (net/xfrm/xfrm_input.c:659)
[17716.240674] xfrm6_rcv (net/ipv6/xfrm6_input.c:172)
[...]
Note that one could set CROSS_COMPILE=llvm- instead to hack around this
issue. However, doing so can break the decodecode routine as it will
force the selection of other LLVM utilities down the line e.g. llvm-as.
[1] https://lore.kernel.org/all/[email protected]/
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Carlos Llamas <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Reviewed-by: Elliot Berman <[email protected]>
Tested-by: Justin Stitt <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: John Stultz <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Cc: Tom Rix <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
With commit 63b85ac56a64 ("kasan: stop leaking stack trace handles"),
KASAN zeroes out alloc meta when an object is freed. The zeroed out data
purposefully includes alloc and auxiliary stack traces but also
accidentally includes aux_lock.
As aux_lock is only initialized for each object slot during slab creation,
when the freed slot is reallocated, saving auxiliary stack traces for the
new object leads to lockdep reports when taking the zeroed out aux_lock.
Arguably, we could reinitialize aux_lock when the object is reallocated,
but a simpler solution is to avoid zeroing out aux_lock when an object
gets freed.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 63b85ac56a64 ("kasan: stop leaking stack trace handles")
Signed-off-by: Andrey Konovalov <[email protected]>
Reported-by: Paul E. McKenney <[email protected]>
Closes: https://lore.kernel.org/linux-next/5cc0f83c-e1d6-45c5-be89-9b86746fe731@paulmck-laptop/
Reviewed-by: Marco Elver <[email protected]>
Tested-by: Paul E. McKenney <[email protected]>
Cc: Alexander Potapenko <[email protected]>
Cc: Andrey Ryabinin <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Liam R. Howlett <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
pahole, which generates BTF, relies on elfutils to process DWARF debug
info. Because kernel modules are relocatable files, elfutils needs to
resolve relocations when processing the DWARF .debug sections.
Hexagon is not supported in binutils or elfutils, so elfutils is unable to
process relocations in kernel modules, causing pahole to crash during BTF
generation.
Do not allow CONFIG_DEBUG_INFO_BTF to be selected for Hexagon until it is
supported in elfutils, so that there are no more cryptic build failures
during BTF generation.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Nathan Chancellor <[email protected]>
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Suggested-by: Nick Desaulniers <[email protected]>
Acked-by: Brian Cain <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
There are more people with git push permissions, but we keep only people
who actually did review and merge patches last year.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Petr Vorel <[email protected]>
Reviewed-by: Li Wang <[email protected]>
Cc: Alexey Kodanev <[email protected]>
Cc: Jan Stancek <[email protected]>
Cc: Mike Frysinger <[email protected]>
Cc: Wanlong Gao <[email protected]>
Cc: Yang Xu <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
In /proc/iomem, sub-regions should be inserted after their parent,
otherwise the insertion of parent resource fails. But after generic
crashkernel reservation applied, in both RISC-V and ARM64 (LoongArch will
also use generic reservation later on), crashkernel resources are inserted
before their parent, which causes the parent disappear in /proc/iomem. So
we defer the insertion of crashkernel resources to an early_initcall().
1, Without 'crashkernel' parameter:
100d0100-100d01ff : LOON0001:00
100d0100-100d01ff : LOON0001:00 LOON0001:00
100e0000-100e0bff : LOON0002:00
100e0000-100e0bff : LOON0002:00 LOON0002:00
1fe001e0-1fe001e7 : serial
90400000-fa17ffff : System RAM
f6220000-f622ffff : Reserved
f9ee0000-f9ee3fff : Reserved
fa120000-fa17ffff : Reserved
fa190000-fe0bffff : System RAM
fa190000-fa1bffff : Reserved
fe4e0000-47fffffff : System RAM
43c000000-441ffffff : Reserved
47ff98000-47ffa3fff : Reserved
47ffa4000-47ffa7fff : Reserved
47ffa8000-47ffabfff : Reserved
47ffac000-47ffaffff : Reserved
47ffb0000-47ffb3fff : Reserved
2, With 'crashkernel' parameter, before this patch:
100d0100-100d01ff : LOON0001:00
100d0100-100d01ff : LOON0001:00 LOON0001:00
100e0000-100e0bff : LOON0002:00
100e0000-100e0bff : LOON0002:00 LOON0002:00
1fe001e0-1fe001e7 : serial
e6200000-f61fffff : Crash kernel
fa190000-fe0bffff : System RAM
fa190000-fa1bffff : Reserved
fe4e0000-47fffffff : System RAM
43c000000-441ffffff : Reserved
47ff98000-47ffa3fff : Reserved
47ffa4000-47ffa7fff : Reserved
47ffa8000-47ffabfff : Reserved
47ffac000-47ffaffff : Reserved
47ffb0000-47ffb3fff : Reserved
3, With 'crashkernel' parameter, after this patch:
100d0100-100d01ff : LOON0001:00
100d0100-100d01ff : LOON0001:00 LOON0001:00
100e0000-100e0bff : LOON0002:00
100e0000-100e0bff : LOON0002:00 LOON0002:00
1fe001e0-1fe001e7 : serial
90400000-fa17ffff : System RAM
e6200000-f61fffff : Crash kernel
f6220000-f622ffff : Reserved
f9ee0000-f9ee3fff : Reserved
fa120000-fa17ffff : Reserved
fa190000-fe0bffff : System RAM
fa190000-fa1bffff : Reserved
fe4e0000-47fffffff : System RAM
43c000000-441ffffff : Reserved
47ff98000-47ffa3fff : Reserved
47ffa4000-47ffa7fff : Reserved
47ffa8000-47ffabfff : Reserved
47ffac000-47ffaffff : Reserved
47ffb0000-47ffb3fff : Reserved
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Huacai Chen <[email protected]>
Fixes: 0ab97169aa05 ("crash_core: add generic function to do reservation")
Cc: Baoquan He <[email protected]>
Cc: Zhen Lei <[email protected]>
Cc: <[email protected]> [6.6+]
Signed-off-by: Andrew Morton <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Convert FPGA bridge, all TPMs (finally), and Rockchip HDMI bindings
to schemas
- Improvements in Samsung GPU schemas
- A few more cases of dropping unneeded quotes in schemas
- Merge QCom idle-states txt binding into common idle-states schema
- Add X1E80100, SM8650, SM8650, and SDX75 SoCs to QCom Power Domain
Controller
- Add NXP i.mx8dl to SCU PD
- Add synaptics r63353 panel controller
- Clarify the wording around the use of 'wakeup-source' property
- Add a DTS coding style doc
- Add smi vendor prefix
- Fix DT_SCHEMA_FILES incorrect matching of paths outside the kernel
tree
- Disable sysfb (e.g. EFI FB) when simple-framebuffer node is present
- Fix double free in of_parse_phandle_with_args_map()
- A couple of kerneldoc fixes
* tag 'devicetree-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (37 commits)
of: unittest: Fix of_count_phandle_with_args() expected value message
dt-bindings: fpga: altera: Convert bridge bindings to yaml
dt-bindings: fpga: Convert bridge binding to yaml
dt-bindings: vendor-prefixes: Add smi
dt-bindings: power: Clarify wording for wakeup-source property
of: Fix double free in of_parse_phandle_with_args_map
dt-bindings: ignore paths outside kernel for DT_SCHEMA_FILES
drivers: of: Fixed kernel doc warning
dt-bindings: tpm: Document Microsoft fTPM bindings
dt-bindings: tpm: Convert IBM vTPM bindings to DT schema
dt-bindings: tpm: Convert Google Cr50 bindings to DT schema
dt-bindings: tpm: Consolidate TCG TIS bindings
dt-bindings: display: rockchip,inno-hdmi: Document RK3128 compatible
dt-bindings: arm: Add remote etm dt-binding
dt-bindings: mmc: sdhci-pxa: Fix 'regs' typo
media: dt-bindings: samsung,s5p-mfc: Fix iommu properties schemas
dt-bindings: display: panel: Add synaptics r63353 panel controller
dt-bindings: arm: merge qcom,idle-state with idle-state
dt-bindings: drm: rockchip: convert inno_hdmi-rockchip.txt to yaml
dt-bindings: cache: qcom,llcc: correct QDU1000 reg entries
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"This contains a bunch of cleanups and simplifications across the
board, as well as a number of small fixes.
Perhaps the most notable change here is the addition of an API that
allows PWMs to be used in atomic contexts, which is useful when time-
critical operations are involved, such as using a PWM to generate IR
signals.
Finally, I have decided to step down as PWM subsystem maintainer. Due
to other responsibilities I have lately not been able to find the time
that the subsystem deserves and Uwe, who has been helping out a lot
for the past few years and has many things planned for the future, has
kindly volunteered to take over. I have no doubt that he will be a
suitable replacement"
* tag 'pwm/for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (44 commits)
MAINTAINERS: pwm: Thierry steps down, Uwe takes over
pwm: linux/pwm.h: fix Excess kernel-doc description warning
pwm: Add pwm_apply_state() compatibility stub
pwm: cros-ec: Drop documentation for dropped struct member
pwm: Drop two unused API functions
pwm: lpc18xx-sct: Don't modify the cached period of other PWM outputs
pwm: meson: Simplify using dev_err_probe()
pwm: stmpe: Silence duplicate error messages
pwm: Reduce number of pointer dereferences in pwm_device_request()
pwm: crc: Use consistent variable naming for driver data
pwm: omap-dmtimer: Drop locking
dt-bindings: pwm: ti,pwm-omap-dmtimer: Update binding for yaml
media: pwm-ir-tx: Trigger edges from hrtimer interrupt context
pwm: bcm2835: Allow PWM driver to be used in atomic context
pwm: Make it possible to apply PWM changes in atomic context
pwm: renesas: Remove unused include
pwm: Replace ENOTSUPP with EOPNOTSUPP
pwm: Rename pwm_apply_state() to pwm_apply_might_sleep()
pwm: Stop referencing pwm->chip
pwm: Update kernel doc for struct pwm_chip
...
|
|
sprintf() is deprecated for sysfs, use preferred sysfs_emit() instead.
Signed-off-by: Shiyang Ruan <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Reviewed-by: Dave Jiang <[email protected]>
Reviewed-by: Fan Ni <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dan Williams <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- assorted functional fixes for hid-steam ported from SteamOS betas
(Vicki Pfau)
- fix for custom sensor-hub sensors (hinge angle sensor and LISS
sensors) not working (Yauhen Kharuzhy)
- functional fix for handling Confidence in Wacom driver (Jason
Gerecke)
- support for Ilitek ili2901 touchscreen (Zhengqiao Xia)
- power management fix for Wacom userspace battery exporting
(Tatsunosuke Tobita)
- rework of wait-for-reset in order to reduce the need for
I2C_HID_QUIRK_NO_IRQ_AFTER_RESET qurk; the success rate is now 50%
better, but there are still further improvements to be made (Hans de
Goede)
- greatly improved coverage of Tablets in hid-selftests (Benjamin
Tissoires)
- support for Nintendo NSO controllers -- SNES, Genesis and N64 (Ryan
McClelland)
- support for controlling mcp2200 GPIOs (Johannes Roith)
- power management improvement for EHL OOB wakeup in intel-ish
(Kai-Heng Feng)
- other assorted device-specific fixes and code cleanups
* tag 'hid-for-linus-2024010801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (53 commits)
HID: amd_sfh: Add a new interface for exporting ALS data
HID: amd_sfh: Add a new interface for exporting HPD data
HID: amd_sfh: rename float_to_int() to amd_sfh_float_to_int()
HID: i2c-hid: elan: Add ili2901 timing
dt-bindings: HID: i2c-hid: elan: Introduce Ilitek ili2901
HID: bpf: make bus_type const in struct hid_bpf_ops
HID: make ishtp_cl_bus_type const
HID: make hid_bus_type const
HID: hid-steam: Add gamepad-only mode switched to by holding options
HID: hid-steam: Better handling of serial number length
HID: hid-steam: Update list of identifiers from SDL
HID: hid-steam: Make client_opened a counter
HID: hid-steam: Clean up locking
HID: hid-steam: Disable watchdog instead of using a heartbeat
HID: hid-steam: Avoid overwriting smoothing parameter
HID: magicmouse: fix kerneldoc for struct magicmouse_sc
HID: sensor-hub: Enable hid core report processing for all devices
HID: wacom: Add additional tests of confidence behavior
HID: wacom: Correct behavior when processing some confidence == false touches
HID: nintendo: add support for nso controllers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
"Three fbdev drivers (~8500 lines of code) removed. The Carillo Ranch
fbdev driver is for an Intel product which was never shipped, and for
the intelfb and the amba-clcd drivers the drm drivers can be used
instead.
The other code changes are minor: some fb_deferred_io flushing fixes,
imxfb margin fixes and stifb cleanups.
Summary:
- Remove intelfb fbdev driver (Thomas Zimmermann)
- Remove amba-clcd fbdev driver (Linus Walleij)
- Remove vmlfb Carillo Ranch fbdev driver (Matthew Wilcox)
- fb_deferred_io flushing fixes (Nam Cao)
- imxfb code fixes and cleanups (Dario Binacchi)
- stifb primary screen detection cleanups (Thomas Zimmermann)"
* tag 'fbdev-for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (28 commits)
fbdev/intelfb: Remove driver
fbdev/hyperv_fb: Do not clear global screen_info
firmware/sysfb: Clear screen_info state after consuming it
fbdev/hyperv_fb: Remove firmware framebuffers with aperture helpers
drm/hyperv: Remove firmware framebuffers with aperture helper
fbdev/sis: Remove dependency on screen_info
video/logo: use %u format specifier for unsigned int values
video/sticore: Remove info field from STI struct
arch/parisc: Detect primary video device from device instance
fbdev/stifb: Allocate fb_info instance with framebuffer_alloc()
video/sticore: Store ROM device in STI struct
fbdev: flush deferred IO before closing
fbdev: flush deferred work in fb_deferred_io_fsync()
fbdev: amba-clcd: Delete the old CLCD driver
fbdev: Remove support for Carillo Ranch driver
fbdev: hgafb: fix kernel-doc comments
fbdev: mmp: Fix typo and wording in code comment
fbdev: fsl-diu-fb: Fix sparse warning due to virt_to_phys() prototype change
fbdev: imxfb: add '*/' on a separate line in block comment
fbdev: imxfb: use __func__ for function name
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- v4l core: subdev frame interval now supports which field
- v4l kapi: moves and renames the init_cfg pad op to init_state as an
internal op.
- new sensor drivers: gc0308, gc2145, Avnet Alvium, ov64a40, tw9900
- new camera driver: STM32 DCMIPP
- s5p-mfc has gained MFC v12 support
- new ISP driver added to staging: Starfive
- new stateful encoder/decoded: Wave5 codec It is found on the J721S2
SoC, JH7100 SoC, ssd202d SoC. Etc.
- fwnode gained support for MIPI "DisCo for Imaging"
(https://www.mipi.org/specifications/mipi-disco-imaging)
- as usual, lots of cleanups, fixups and driver improvements.
* tag 'media/v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (309 commits)
media: i2c: thp7312: select CONFIG_FW_LOADER
media: i2c: mt9m114: use fsleep() in place of udelay()
media: videobuf2: core: Rename min_buffers_needed field in vb2_queue
media: i2c: thp7312: Store frame interval in subdev state
media: docs: uAPI: Fix documentation of 'which' field for routing ioctls
media: docs: uAPI: Expand error documentation for invalid 'which' value
media: docs: uAPI: Clarify error documentation for invalid 'which' value
media: v4l2-subdev: Store frame interval in subdev state
media: v4l2-subdev: Add which field to struct v4l2_subdev_frame_interval
media: v4l2-subdev: Turn .[gs]_frame_interval into pad operations
media: v4l: subdev: Move out subdev state lock macros outside CONFIG_MEDIA_CONTROLLER
media: s5p-mfc: DPB Count Independent of VIDIOC_REQBUF
media: s5p-mfc: Load firmware for each run in MFCv12.
media: s5p-mfc: Set context for valid case before calling try_run
media: s5p-mfc: Add support for DMABUF for encoder
media: s5p-mfc: Add support for UHD encoding.
media: s5p-mfc: Add support for rate controls in MFCv12
media: s5p-mfc: Add YV12 and I420 multiplanar format support
media: s5p-mfc: Add initial support for MFCv12
media: s5p-mfc: Rename IS_MFCV10 macro
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Ira Weiny:
"A mix of bug fixes and updates to interfaces used by nvdimm:
- Updates to interfaces include:
Use the new scope based management
Remove deprecated ida interfaces
Update to sysfs_emit()
- Fixup kdoc comments"
* tag 'libnvdimm-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
acpi/nfit: Use sysfs_emit() for all attributes
nvdimm/namespace: fix kernel-doc for function params
nvdimm/dimm_devs: fix kernel-doc for function params
nvdimm/btt: fix btt_blk_cleanup() kernel-doc
nvdimm-btt: simplify code with the scope based resource management
nvdimm: Remove usage of the deprecated ida_simple_xx() API
ACPI: NFIT: Use cleanup.h helpers instead of devm_*()
|
|
Pull MMC updates from Ulf Hansson:
"MMC core:
- Don't force a retune before eMMC RPMB switch
- Add optional HS400 tuning in HS400es initialization
- Add a sysfs node to for write-protect-group-size
- Add re-tuning test to the mmc-test module
- Use mrq.sbc to support close-ended ioctl requests
MMC host:
- mmci: Add support for SDIO in-band irqs for the stm32 variant
- mmc_spi: Remove broken support custom DMA mapped buffers
- mtk-sd: Improve and extend the support for tunings
- renesas_sdhi: Document support for the RZ/Five variant
- sdhci_am654: Drop support for the ti,otap-del-sel DT property
- sdhci-brcmstb: Add support for the brcm 74165b0 variant
- sdhci-msm: Add compatibles for IPQ4019 and IPQ8074
- sdhci-of-dwcmshc: Add support for the T-Head TH1520 variant
- sdhci-xenon: Add support for the Marvell ac5 variant"
* tag 'mmc-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (27 commits)
mmc: xenon: Add ac5 support via bounce buffer
dt-bindings: mmc: add Marvell ac5
mmc: sdhci-brcmstb: add new sdhci reset sequence for brcm 74165b0
dt-bindings: mmc: brcm,sdhci-brcmstb: Add support for 74165b0
mmc: core: Do not force a retune before RPMB switch
mmc: core: Add HS400 tuning in HS400es initialization
mmc: sdhci_omap: Fix TI SoC dependencies
mmc: sdhci_am654: Fix TI SoC dependencies
mmc: core: Add wp_grp_size sysfs node
mmc: mmc_test: Add re-tuning test
mmc: mmc_spi: remove custom DMA mapped buffers
dt-bindings: mmc: sdhci-msm: document dedicated IPQ4019 and IPQ8074
dt-bindings: mmc: synopsys-dw-mshc: add iommus for Intel SocFPGA
mmc: mtk-sd: Extend number of tuning steps
dt-bindings: mmc: mtk-sd: add tuning steps related property
mmc: sdhci-omap: don't misuse kernel-doc marker
mmc: mtk-sd: Increase the verbosity of msdc_track_cmd_data
mmc: core: Use mrq.sbc in close-ended ffu
mmc: sdhci_am654: Drop lookup for deprecated ti,otap-del-sel
mmc: sdhci-of-dwcmshc: Use logical OR instead of bitwise OR in dwcmshc_probe()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"Core:
- Move the generic PM domain and its governor to the pmdomain
subsystem
- Drop the unused pm_genpd_opp_to_performance_state()
Providers:
- Convert some providers to let the ->remove() callback return void
- amlogic: Add support for G12A ISP power domain
- arm: Move the SCPI power-domain driver to the pmdomain subsystem
- arm: Move Kconfig options to the pmdomain subsystem
- qcom: Update part number to X1E80100 for the rpmhpd"
* tag 'pmdomain-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
PM: domains: Move genpd and its governor to the pmdomain subsystem
PM: domains: Drop redundant header for genpd
PM: domains: Drop the unused pm_genpd_opp_to_performance_state()
PM: domains: fix domain_governor kernel-doc warnings
pmdomain: xilinx/zynqmp: Convert to platform remove callback returning void
pmdomain: qcom-cpr: Convert to platform remove callback returning void
pmdomain: imx93-pd: Convert to platform remove callback returning void
pmdomain: imx93-blk-ctrl: Convert to platform remove callback returning void
pmdomain: imx8mp-blk-ctrl: Convert to platform remove callback returning void
pmdomain: imx8m-blk-ctrl: Convert to platform remove callback returning void
pmdomain: imx-gpcv2: Convert to platform remove callback returning void
pmdomain: imx-gpc: Convert to platform remove callback returning void
pmdomain: imx-pgc: Convert to platform remove callback returning void
pmdomain: amlogic: meson-ee-pwrc: add support for G12A ISP power domain
dt-bindings: power: meson-g12a-power: document ISP power domain
firmware: arm_scpi: Move power-domain driver to the pmdomain dir
pmdomain: arm_scmi: Move Kconfig options to the pmdomain subsystem
pmdomain: qcom: rpmhpd: Update part number to X1E80100
dt-bindings: power: rpmpd: Update part number to X1E80100
|
|
Pull rdma updates from Jason Gunthorpe:
"Small cycle, with some typical driver updates:
- General code tidying in siw, hfi1, idrdma, usnic, hns rtrs and
bnxt_re
- Many small siw cleanups without an overeaching theme
- Debugfs stats for hns
- Fix a TX queue timeout in IPoIB and missed locking of the mcast
list
- Support more features of P7 devices in bnxt_re including a new work
submission protocol
- CQ interrupts for MANA
- netlink stats for erdma
- EFA multipath PCI support
- Fix Incorrect MR invalidation in iser"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (66 commits)
RDMA/bnxt_re: Fix error code in bnxt_re_create_cq()
RDMA/efa: Add EFA query MR support
IB/iser: Prevent invalidating wrong MR
RDMA/erdma: Add hardware statistics support
RDMA/erdma: Introduce dma pool for hardware responses of CMDQ requests
IB/iser: iscsi_iser.h: fix kernel-doc warning and spellos
RDMA/mana_ib: Add CQ interrupt support for RAW QP
RDMA/mana_ib: query device capabilities
RDMA/mana_ib: register RDMA device with GDMA
RDMA/bnxt_re: Fix the sparse warnings
RDMA/bnxt_re: Fix the offset for GenP7 adapters for user applications
RDMA/bnxt_re: Share a page to expose per CQ info with userspace
RDMA/bnxt_re: Add UAPI to share a page with user space
IB/ipoib: Fix mcast list locking
RDMA/mlx5: Expose register c0 for RDMA device
net/mlx5: E-Switch, expose eswitch manager vport
net/mlx5: Manage ICM type of SW encap
RDMA/mlx5: Support handling of SW encap ICM area
net/mlx5: Introduce indirect-sw-encap ICM properties
RDMA/bnxt_re: Adds MSN table capability for Gen P7 adapters
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire updates from Takashi Sakamoto:
"This includes the series of changes related to device attributes, as
well as slight code refactoring.
Some old devices are recognized to have legacy layout of configuration
ROM. They have an inconvenience that FireWire subsystem adds no
attributes for vendor information to corresponding devices. The main
purpose of this update is to rectify the inconvenience.
We have a slight concern about regression. The update changes the
value of modalias for the unit devices by populating its model field,
which was previously left as zero in the case. I've assessed the
potential impact of this change and anticipate it to have minimal
concern for both the kernel and user lands. The change is enough
acceptable"
* tag 'firewire-updates-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: fill model field in modalias of unit device for legacy layout of configuration ROM
firewire: core: detect model name for legacy layout of configuration ROM
firewire: core: detect numeric model identifier for legacy layout of configuration ROM
firewire: test: add test of device attributes for legacy AV/C device
firewire: test: add test of device attributes for simple AV/C device
firewire: test: add KUnit test for device attributes
firewire: core: replace magic number with macro
firewire: core: adds constant qualifier for local helper functions
firewire: make fw_bus_type const
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/johan/gnss
Pull GNSS updates from Johan Hovold:
- support for the reset pin found on some u-blox receivers
- use new regulator helper for the u-blox backup supply
* tag 'gnss-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/gnss:
gnss: ubx: add support for the reset gpio
dt-bindings: gnss: u-blox: add "reset-gpios" binding
gnss: ubx: use new helper to remove open coded regulator handling
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Only a couple new SoCs have support added this time, primarily for
Qualcomm SM8650 based on the diffstat. Otherwise this is a collection
of non-critical fixes and cleanups to various clk drivers and their DT
bindings.
Nothing is changed in the core clk framework this time, although
there's a patch to fix a basic clk type initialization function. In
general, this pile looks to be on the smaller side.
New Drivers:
- Global, display, gpu, tcsr, and rpmh clocks on Qualcomm SM8650
- Mediatek MT7988 SoC clocks
Updates:
- Update Zynqmp driver for Versal NET platforms
- Add clk driver for Versal clocking wizard IP
- Support for stm32mp25 clks
- Add glitch free PLL setting support to si5351 clk driver
- Add DSI clocks on Amlogic g12/sm1
- Add CSI and ISP clocks on Amlogic g12/sm1
- Document bindings for i.MX93 ANATOP clock driver
- Free clk_node in i.MX SCU driver for resource with different owner
- Update the LVDS clocks to be compatible with i.MX SCU firmware 1.15
- Fix the name of the fvco in i.MX pll14xx by renaming it to fout
- Add EtherNet TSN and PCIe clocks on the Renesas R-Car V4H SoC
- Add interrupt controller and Ethernet clocks and resets on Renesas
RZ/G3S
- Check reset monitor registers on Renesas RZ/G2L-alike SoCs
- Reuse reset functionality in the Renesas RZ/G2L clock driver
- Global and RPMh clock support for the Qualcomm X1E80100 SoC
- Support for the Stromer APCS PLL found in Qualcomm IPQ5018
- Add a new type of branch clock, with support for controlling
separate memory control bits, to the Qualcomm clk driver
- Use above new branch type in Qualcomm ECPRI clk driver for QDU1000
and QRU1000
- Add a number of missing clocks related to CSI2 on Qualcomm MSM8939
- Add support for the camera clock controller on Qualcomm SC8280XP
- Correct PLL configuration in GPU and video clock controllers for
Qualcomm SM8150
- Add runtime PM support and a few missing resets to Qualcomm SM8150
video clock controller
- Fix configuration of various GCC GDSCs on Qualcomm SM8550
- Mark shared RCGs appropriately in the Qualcomm SM8550 GCC driver
- Fix up GPU and display clock controllers PLL configuration settings
on Qualcomm SM8550
- Cleanup variable init in Allwinner nkm module
- Convert various DT bindings to YAML
- A few kernel-doc fixes for Samsung SoC clock controllers"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (93 commits)
clk: mediatek: add drivers for MT7988 SoC
clk: mediatek: add pcw_chg_bit control for PLLs of MT7988
dt-bindings: clock: mediatek: add clock controllers of MT7988
dt-bindings: reset: mediatek: add MT7988 ethwarp reset IDs
dt-bindings: clock: mediatek: add MT7988 clock IDs
clk: mediatek: mt8188-topckgen: Refactor parents for top_dp/edp muxes
clk: mediatek: mt8195-topckgen: Refactor parents for top_dp/edp muxes
clk: mediatek: clk-mux: Support custom parent indices for muxes
dt-bindings: clock: sophgo: Add clock controller of CV1800 series SoC
clk: starfive: jh7100: Add CLK_SET_RATE_PARENT to gmac_tx
clk: starfive: Add flags argument to JH71X0__MUX macro
clk: imx: pll14xx: change naming of fvco to fout
clk: imx: clk-imx8qxp: fix LVDS bypass, pixel and phy clocks
clk: imx: scu: Fix memory leak in __imx_clk_gpr_scu()
clk: fixed-rate: fix clk_hw_register_fixed_rate_with_accuracy_parent_hw
clk: qcom: dispcc-sm8650: Add test_ctl parameters to PLL config
clk: qcom: gpucc-sm8650: Add test_ctl parameters to PLL config
clk: qcom: dispcc-sm8550: Use the correct PLL configuration function
clk: qcom: dispcc-sm8550: Update disp PLL settings
clk: qcom: gpucc-sm8550: Update GPU PLL settings
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We have two new drivers, an assortment of updates and cleanups to many
others, and first part of the big rework of the core GPIOLIB that's
currently underway.
Add to that some code shrink in the character device module and
updates to DT bindings and that's pretty much it.
Core GPIOLIB:
- protect the global list of GPIO devices with a read-write semaphore
as it is rarely modified but can be traversed by multiple readers
at once
- remove GPIO devices from the global list when they are
*unregistered* and not when they are *released* (which only happens
when the last reference is dropped) as this may lead to a
successful lookup of an unregistered device
- remove the unnecessary "extra_checks" switch
- rename functions that are called with a lock taken
- remove duplicate includes
Character device handling:
- use locking guards to reduce the code size
- allocate the big linereq structure using the more suitable
kvzalloc()
- redulce the size of critical sections
- improve documentation
- move the debounce_period_us field out of struct gpio_desc
New drivers:
- Nuvoton NPCM SGPIO driver for BMC NPCM7xx/NPCM8xx
- Realtek DHC (Digital Home Center) SoC GPIO driver
Driver improvements:
- replace gpiochip_is_requested() with a safer alternative in the
form of gpiochip_dup_line_label() as the former returns a pointer
to a string that can be deleted
- implement the dbg_show() callback in gpio-sim
- improve the coding style for local variables by removing
unnecessary tabs
- use generic device properties instead of OF variants in gpio-mmio
- use the preferred coding style for __free() in gpio-mockup
- reuse PM ops from the gpio-tangier in gpio-elkhartlake
- rework PM and use cleanup helpers in gpio-tangier
- fix the EIC configuration in gpio-pmic-eic-sprd
- remove the unneeded call to platform_set_drvdata() in gpio-sifive
- use generic GPIO helpers for driver callbacks in gpio-dwapb
- add clock support on certain pins of gpio-ixp4xx
- don't use the core-specific DEBUG_GPIO switch in drivers
- kerneldoc improvements
DT bindings:
- add bindings for the new Realtek and Nuvoton devices
- allow gpio-ranges in gpio-dwapb
- support GPIO hogs in gpio-rockchip
- describe the label property in gpio-zynqmp-modepin
Other:
- header cleanups
- forward declarations cleanups"
* tag 'gpio-updates-for-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (55 commits)
gpiolib: replace the GPIO device mutex with a read-write semaphore
gpiolib: remove the GPIO device from the list when it's unregistered
gpio: nuvoton: Add Nuvoton NPCM sgpio driver
dt-bindings: gpio: add NPCM sgpio driver bindings
gpio: rtd: Add support for Realtek DHC(Digital Home Center) RTD SoCs
dt-bindings: gpio: realtek: Add realtek,rtd-gpio
gpio: pmic-eic-sprd: Configure the bit corresponding to the EIC through offset
gpio: dwapb: Use generic request, free and set_config
gpio: sysfs: drop tabs from local variable declarations
gpiolib: drop tabs from local variable declarations
gpiolib: remove extra_checks
gpio: tps65219: don't use CONFIG_DEBUG_GPIO
gpiolib: cdev: replace locking wrappers for gpio_device with guards
gpiolib: cdev: replace locking wrappers for config_mutex with guards
gpiolib: cdev: allocate linereq using kvzalloc()
gpiolib: cdev: include overflow.h
gpiolib: cdev: reduce locking in gpio_desc_to_lineinfo()
gpiolib: cdev: improve documentation of get/set values
gpiolib: cdev: fully adopt guard() and scoped_guard()
gpiolib: remove debounce_period_us from struct gpio_desc
...
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- Add Mediatek MT7988 watchdog
- Add IT8659 watchdog
- watchdog: set cdev owner before adding
- hpwdt: Only claim UNKNOWN NMI if from iLO
- Various other fixes and improvements
* tag 'linux-watchdog-6.8-rc1' of git://www.linux-watchdog.org/linux-watchdog: (30 commits)
watchdog: mlx_wdt: fix all kernel-doc warnings
dt-bindings: watchdog: qcom,pm8916-wdt: add parent spmi node to example
dt-bindings: watchdog: nxp,pnx4008-wdt: convert txt to yaml
dt-bindings: watchdog: qca,ar7130-wdt: convert txt to yaml
dt-bindings: watchdog: intel,keembay: reference common watchdog schema
dt-bindings: watchdog: re-order entries to match coding convention
watchdog: it87_wdt: Keep WDTCTRL bit 3 unmodified for IT8784/IT8786
watchdog: it87_wdt: Add IT8659 ID
watchdog: it87_wdt: Remove redundant max_units setting
watchdog: it87_wdt: add blank line after variable declaration
dt-bindings: wdt: Add ts72xx
dt-bindings: watchdog: dlg,da9062-watchdog: Document DA9063 watchdog
dt-bindings: watchdog: dlg,da9062-watchdog: Add fallback for DA9061 watchdog
watchdog: rti_wdt: Drop runtime pm reference count when watchdog is unused
watchdog: starfive: add lock annotations to fix context imbalances
watchdog: mediatek: mt7988: add wdt support
dt-bindings: watchdog: mediatek,mtk-wdt: add MT7988 watchdog and toprgu
dt-bindings: watchdog: realtek,rtd1295-watchdog: convert txt to yaml
watchdog: bcm2835_wdt: Fix WDIOC_SETTIMEOUT handling
watchdog/hpwdt: Remove unused variable
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- pmbus: Support for MPS Multi-phase mp2856/mp2857 controller
- pmbus: Support for MPS Multi-phase mp5990
- Driver for Gigabyte AORUS Waterforce AIO coolers
Added support to existing drivers:
- lm75: Support for AMS AS6200 temperature sensor
- k10temp: Support for AMD Family 19h Model 8h
- max31827: Support for max31828 and max31829
- sht3x: Support for sts3x
- Add support for WMI SMM interface, and various related improvements.
Add support for Optiplex 7000
- emc1403: Support for EMC1442
- npcm750-pwm-fan: Support for NPCM8xx
- nct6775: Add support for 2 additional fan controls
Minor improvements and bug fixes:
- gigabyte_waterforce: Mark status report as received under a spinlock
- aquacomputer_d5next: Remove unneeded CONFIG_DEBUG_FS #ifdef
- gpio-fan: Convert txt bindings to yaml
- smsc47m1: Various cleanups / improvements
- corsair-cpro: use NULL instead of 0
- hp-wmi-sensors: Fix failure to load on EliteDesk 800 G6
- tmp513: Various cleanups
- peci/dimmtemp: Bump timeout
- pc87360: Bounds check data->innr usage
- nct6775: Fix fan speed set failure in automatic mode
- ABI: sysfs-class-hwmon: document various missing attributes
- lm25066, max6650, nct6775: Use i2c_get_match_data()
- aspeed-pwm-tacho: Fix -Wstringop-overflow warning"
* tag 'hwmon-for-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (59 commits)
hwmon: (gigabyte_waterforce) Mark status report as received under a spinlock
hwmon: (lm75) Fix tmp112 default config
hwmon: (lm75) Add AMS AS6200 temperature sensor
dt-bindings: hwmon: (lm75) Add AMS AS6200 temperature sensor
hwmon: (lm75) remove now-unused include
hwmon: (pmbus) Add support for MPS Multi-phase mp2856/mp2857 controller
dt-bindings: Add MP2856/MP2857 voltage regulator device
hwmon: (aquacomputer_d5next) Remove unneeded CONFIG_DEBUG_FS #ifdef
dt-bindings: hwmon: gpio-fan: Convert txt bindings to yaml
hwmon: (k10temp) Add support for AMD Family 19h Model 8h
hwmon: Add driver for Gigabyte AORUS Waterforce AIO coolers
hwmon: (smsc47m1) Rename global platform device variable
hwmon: (smsc47m1) Simplify device registration
hwmon: (smsc47m1) Convert to platform remove callback returning void
hwmon: (smsc47m1) Mark driver struct with __refdata to prevent section mismatch
MAINTAINERS: Add maintainer for Baikal-T1 PVT hwmon driver
hwmon: (sht3x) add sts3x support
hwmon: (pmbus) Add ltc4286 driver
dt-bindings: hwmon: Add lltc ltc4286 driver bindings
hwmon: (max31827) Add custom attribute for resolution
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It was a calm development cycle. There were an ALSA core extension for
subformat PCM bits and a few ASoC core changes to support N:M
mappings, while the most of remaining changes are driver-specific.
Core:
- API extensions for properly limiting PCM format bits via subformat
- Enhanced support for N:M CPU:CODEC mappings in the core and in
audio-graph-card2
ASoC:
- Lots of SOF updates: fallback support to older IPC versions,
notification on control changes with IPC4. Also supports for ACPI
parse for the ES83xx driver that reduces quirks.
- Device tree support for describing parts of the card which can be
active over suspend (for very low power playback or wake word use
cases)
- Support for more AMD and Intel systems, NXP i.MX8m MICFIL, Qualcomm
SM8250, SM8550, SM8650 and X1E80100
- Drop of Freescale MPC8610 code that is no longer supported
HD-audio:
- More CS35L41 codec extensions for Dell, HP and Lenovo models
- TAS2781 codec extensions for Lenovo and co
- New PCM subformat supports
Others:
- More enhancement for Scarlett2 USB mixer support
- Various kselftest fixes"
* tag 'sound-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (337 commits)
kselftest/alsa - conf: Stringify the printed errno in sysfs_get()
kselftest/alsa - mixer-test: Fix the print format specifier warning
kselftest/alsa - mixer-test: Fix the print format specifier warning
kselftest/alsa - mixer-test: fix the number of parameters to ksft_exit_fail_msg()
ALSA: hda/tas2781: annotate calibration data endianness
ALSA: hda/realtek: Fix mute and mic-mute LEDs for HP Envy X360 13-ay0xxx
ALSA: hda/conexant: Fix headset auto detect fail in cx8070 and SN6140
ALSA: ac97: fix build regression
ALSA: hda: cs35l41: Support more HP models without _DSD
ALSA: hda/tas2781: add fixup for Lenovo 14ARB7
ALSA: hda/tas2781: add TAS2563 support for 14ARB7
ALSA: hda/tas2781: add configurable global i2c address
ALSA: hda/tas2781: add ptrs to calibration functions
ALSA: hda: Add driver properties for cs35l41 for Lenovo Legion Slim 7 Gen 8 serie
ALSA: hda/realtek: enable SND_PCI_QUIRK for Lenovo Legion Slim 7 Gen 8 (2023) serie
ALSA: hda/tas2781: configure the amp after firmware load
ALSA: mark all struct bus_type as const
ASoC: pxa: sspa: Don't select SND_ARM
ASoC: rt5663: cancel the work when system suspends
ALSA: scarlett2: Add PCM Input Switch for Solo Gen 4
...
|
|
Pull drm updates from Dave Airlie:
"This contains two major new drivers:
- imagination is a first driver for Imagination Technologies devices,
it only covers very specific devices, but there is hope to grow it
- xe is a reboot of the i915 GPU (shares display) side using a more
upstream focused development model, and trying to maximise code
sharing. It's not enabled for any hw by default, and will hopefully
get switched on for Intel's Lunarlake.
This also drops a bunch of the old UMS ioctls. It's been dead long
enough.
amdgpu has a bunch of new color management code that is being used in
the Steam Deck.
amdgpu also has a new ACPI WBRF interaction to help avoid radio
interference.
Otherwise it's the usual lots of changes in lots of places.
Detailed summary:
new drivers:
- imagination - new driver for Imagination Technologies GPU
- xe - new driver for Intel GPUs using core drm concepts
core:
- add CLOSE_FB ioctl
- remove old UMS ioctls
- increase max objects to accomodate AMD color mgmt
encoder:
- create per-encoder debugfs directory
edid:
- split out drm_eld
- SAD helpers
- drop edid_firmware module parameter
format-helper:
- cache format conversion buffers
sched:
- move from kthread to workqueue
- rename some internals
- implement dynamic job-flow control
gpuvm:
- provide more features to handle GEM objects
client:
- don't acquire module reference
displayport:
- add mst path property documentation
fdinfo:
- alignment fix
dma-buf:
- add fence timestamp helper
- add fence deadline support
bridge:
- transparent aux-bridge for DP/USB-C
- lt8912b: add suspend/resume support and power regulator support
panel:
- edp: AUO B116XTN02, BOE NT116WHM-N21,836X2, NV116WHM-N49
- chromebook panel support
- elida-kd35t133: rework pm
- powkiddy RK2023 panel
- himax-hx8394: drop prepare/unprepare and shutdown logic
- BOE BP101WX1-100, Powkiddy X55, Ampire AM8001280G
- Evervision VGG644804, SDC ATNA45AF01
- nv3052c: register docs, init sequence fixes, fascontek FS035VG158
- st7701: Anbernic RG-ARC support
- r63353 panel controller
- Ilitek ILI9805 panel controller
- AUO G156HAN04.0
simplefb:
- support memory regions
- support power domains
amdgpu:
- add new 64-bit sequence number infrastructure
- add AMD specific color management
- ACPI WBRF support for RF interference handling
- GPUVM updates
- RAS updates
- DCN 3.5 updates
- Rework PCIe link speed handling
- Document GPU reset types
- DMUB fixes
- eDP fixes
- NBIO 7.9/7.11 updates
- SubVP updates
- XGMI PCIe state dumping for aqua vanjaram
- GFX11 golden register updates
- enable tunnelling on high pri compute
amdkfd:
- Migrate TLB flushing logic to amdgpu
- Trap handler fixes
- Fix restore workers handling on suspend/resume
- Fix possible memory leak in pqm_uninit()
- support import/export of dma-bufs using GEM handles
radeon:
- fix possible overflows in command buffer checking
- check for errors in ring_lock
i915:
- reorg display code for reuse in xe driver
- fdinfo memory stats printing
- DP MST bandwidth mgmt improvements
- DP panel replay enabling
- MTL C20 phy state verification
- MTL DP DSC fractional bpp support
- Audio fastset support
- use dma_fence interfaces instead of i915_sw_fence
- Separate gem and display code
- AUX register macro refactoring
- Separate display module/device parameters
- Move display capabilities debugfs under display
- Makefile cleanups
- Register cleanups
- Move display lock inits under display/
- VLV/CHV DPIO PHY register and interface refactoring
- DSI VBT sequence refactoring
- C10/C20 PHY PLL hardware readout
- DPLL code cleanups
- Cleanup PXP plane protection checks
- Improve display debug msgs
- PSR selective fetch fixes/improvements
- DP MST fixes
- Xe2LPD FBC restrictions removed
- DGFX uses direct VBT pin mapping
- more MTL WAs
- fix MTL eDP bug
- eliminate use of kmap_atomic
habanalabs:
- sysfs entry to identify a device minor id with debugfs path
- sysfs entry to expose device module id
- add signed device info retrieval through INFO ioctl
- add Gaudi2C device support
- pcie reset prepare/done hooks
msm:
- Add support for SDM670, SM8650
- Handle the CFG interconnect to fix the obscure hangs / timeouts
- Kconfig fix for QMP dependency
- use managed allocators
- DPU: SDM670, SM8650 support
- DPU: Enable SmartDMA on SM8350 and SM8450
- DP: enable runtime PM support
- GPU: add metadata UAPI
- GPU: move devcoredumps to GPU device
- GPU: convert to drm_exec
ivpu:
- update FW API
- new debugfs file
- a new NOP job submission test mode
- improve suspend/resume
- PM improvements
- MMU PT optimizations
- firmware profile frequency support
- support for uncached buffers
- switch to gem shmem helpers
- replace kthread with threaded irqs
rockchip:
- rk3066_hdmi: convert to atomic
- vop2: support nv20 and nv30
- rk3588 support
mediatek:
- use devm_platform_ioremap_resource
- stop using iommu_present
- MT8188 VDOSYS1 display support
panfrost:
- PM improvements
- improve interrupt handling as poweroff
qaic:
- allow to run with single MSI
- support host/device time sync
- switch to persistent DRM devices
exynos:
- fix potential error pointer dereference
- fix wrong error checking
- add missing call to drm_atomic_helper_shutdown
omapdrm:
- dma-fence lockdep annotation fix
tidss:
- dma-fence lockdep annotation fix
- support for AM62A7
v3d:
- BCM2712 - rpi5 support
- fdinfo + gputop support
- uapi for CPU job handling
virtio-gpu:
- add context debug name"
* tag 'drm-next-2024-01-10' of git://anongit.freedesktop.org/drm/drm: (2340 commits)
drm/amd/display: Allow z8/z10 from driver
drm/amd/display: fix bandwidth validation failure on DCN 2.1
drm/amdgpu: apply the RV2 system aperture fix to RN/CZN as well
drm/amd/display: Move fixpt_from_s3132 to amdgpu_dm
drm/amd/display: Fix recent checkpatch errors in amdgpu_dm
Revert "drm/amdkfd: Relocate TBA/TMA to opposite side of VM hole"
drm/amd/display: avoid stringop-overflow warnings for dp_decide_lane_settings()
drm/amd/display: Fix power_helpers.c codestyle
drm/amd/display: Fix hdcp_log.h codestyle
drm/amd/display: Fix hdcp2_execution.c codestyle
drm/amd/display: Fix hdcp_psp.h codestyle
drm/amd/display: Fix freesync.c codestyle
drm/amd/display: Fix hdcp_psp.c codestyle
drm/amd/display: Fix hdcp1_execution.c codestyle
drm/amd/pm/smu7: fix a memleak in smu7_hwmgr_backend_init
drm/amdkfd: Fix iterator used outside loop in 'kfd_add_peer_prop()'
drm/amdgpu: Drop 'fence' check in 'to_amdgpu_amdkfd_fence()'
drm/amdkfd: Confirm list is non-empty before utilizing list_first_entry in kfd_topology.c
drm/amdgpu: Fix '*fw' from request_firmware() not released in 'amdgpu_ucode_request()'
drm/amdgpu: Fix variable 'mca_funcs' dereferenced before NULL check in 'amdgpu_mca_smu_get_mca_entry()'
...
|
|
dev_err_probe() is only supposed to be used in probe functions. While it
probably doesn't hurt, both the EPROBE_DEFER handling and calling
device_set_deferred_probe_reason() are conceptually wrong in the request
callback. So replace the call by dev_err() and a separate return
statement.
This effectively reverts commit c0bfe9606e03 ("pwm: jz4740: Simplify
with dev_err_probe()").
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Fixes: c0bfe9606e03 ("pwm: jz4740: Simplify with dev_err_probe()")
Cc: [email protected]
Signed-off-by: Uwe Kleine-König <[email protected]>
|
|
With args->args_count == 2 args->args[2] is not defined. Actually the
flags are contained in args->args[1].
Fixes: 3ab7b6ac5d82 ("pwm: Introduce single-PWM of_xlate function")
Cc: [email protected]
Link: https://lore.kernel.org/r/243908750d306e018a3d4bf2eb745d53ab50f663.1704835845.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <[email protected]>
|
|
devm_add_action_or_reset() already calls the action in the error case.
Reported-by: Uwe Kleine-König <[email protected]>
Closes: https://lore.kernel.org/linux-pwm/fuku3b5ur6y4k4refd3vmeoenzjo6mwe3b3gtel34rhhhtvnsa@w4uktgbqsc3w/
Fixes: fcc760729359 ("pwm: bcm2835: Allow PWM driver to be used in atomic context")
Signed-off-by: Sean Young <[email protected]>
Reviewed-by: Uwe Kleine-König <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Uwe Kleine-König <[email protected]>
|
|
Since commit 4005d1ba0a7e ("ASoC: soc-dai: don't call PCM audio ops if
the stream is not supported") HDMI playback is broken with avs driver.
This happens because for HDMI stream (unlike generic HDA one)
channels_min for stream is not set when creating PCMs. Fix this by
setting the value based on first available converter.
Fixes: 4005d1ba0a7e ("ASoC: soc-dai: don't call PCM audio ops if the stream is not supported")
Signed-off-by: Amadeusz Sławiński <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|