Age | Commit message (Collapse) | Author | Files | Lines |
|
- Log device type (Root Port, Switch Port, etc) during enumeration (Bjorn
Helgaas)
- Log resource names (BAR 0, VF BAR 0, bridge window, etc) consistently
instead of a mix of names and "reg 0x10" (Puranjay Mohan, Bjorn Helgaas)
- Log bridges before devices below the bridges (Bjorn Helgaas)
* pci/enumeration-logging:
PCI: Log bridge info when first enumerating bridge
PCI: Log bridge windows conditionally
PCI: Supply bridge device, not secondary bus, to read window details
PCI: Move pci_read_bridge_windows() below individual window accessors
PCI: Use resource names in PCI log messages
PCI: Update BAR # and window messages
PCI: Log device type during enumeration
|
|
- Convert pci-host-common.c platform .remove() callback to .remove_new()
returning 'void' since it's not useful to return error codes here (Uwe
Kleine-König)
- Log a message about updating AMD USB controller class code (so dwc3, not
xhci, claims it) only when we actually change it (Guilherme G. Piccoli)
- Use PCI_HEADER_TYPE_* instead of literals in x86, powerpc, SCSI lpfc
(Ilpo Järvinen)
- Clean up open-coded PCIBIOS return code mangling (Ilpo Järvinen)
- Fix 64GT/s effective data rate calculation to use 1b/1b encoding rather
than the 8b/10b or 128b/130b used by lower rates (Ilpo Järvinen)
* pci/enumeration:
PCI: Fix 64GT/s effective data rate calculation
x86/pci: Clean up open-coded PCIBIOS return code mangling
scsi: lpfc: Use PCI_HEADER_TYPE_MFD instead of literal
powerpc/fsl-pci: Use PCI_HEADER_TYPE_MASK instead of literal
x86/pci: Use PCI_HEADER_TYPE_* instead of literals
PCI: Only override AMD USB controller if required
PCI: host-generic: Convert to platform remove callback returning void
|
|
- Reserve ECAM if BIOS didn't include it in PNP0C02 _CRS (Bjorn Helgaas)
- Add MMCONFIG/ECAM debug logging (Bjorn Helgaas)
- Rename 'MMCONFIG' to 'ECAM' to match spec usage (Bjorn Helgaas)
* pci/ecam:
x86/pci: Reorder pci_mmcfg_arch_map() definition before calls
x86/pci: Return pci_mmconfig_add() failure early
x86/pci: Comment pci_mmconfig_insert() obscure MCFG dependency
x86/pci: Rename pci_mmcfg_check_reserved() to pci_mmcfg_reserved()
x86/pci: Rename acpi_mcfg_check_entry() to acpi_mcfg_valid_entry()
x86/pci: Rename 'MMCONFIG' to 'ECAM', use pr_fmt
x86/pci: Add MCFG debug logging
x86/pci: Reword ECAM EfiMemoryMappedIO logging to avoid 'reserved'
x86/pci: Reserve ECAM if BIOS didn't include it in PNP0C02 _CRS
|
|
- Log AER errors as "Correctable" (not "Corrected") or "Uncorrectable" to
match spec terminology (Bjorn Helgaas)
- Decode Requester ID when no error info found instead of printing the raw
hex value (Bjorn Helgaas)
* pci/aer:
PCI/AER: Use explicit register sizes for struct members
PCI/AER: Decode Requester ID when no error info found
PCI/AER: Use 'Correctable' and 'Uncorrectable' spec terms for errors
|
|
Fix kernel-doc issues reported by
"find include -name \*pci\* | xargs scripts/kernel-doc -none":
include/linux/pci.h:731: warning: Function parameter or member 'pdev' not described in 'pci_is_vga'
include/linux/pci-epc.h:154: warning: Function parameter or member 'list_lock' not described in 'pci_epc'
include/linux/pci-epf.h:83: warning: expecting prototype for struct pci_epf_event_ops. Prototype was for struct pci_epc_event_ops instead
Link: https://lore.kernel.org/r/[email protected]
Tested-by: Randy Dunlap <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Manivannan Sadhasivam <[email protected]>
Acked-by: Randy Dunlap <[email protected]>
Acked-by: Sui Jingfeng <[email protected]>
|
|
Commit 9e4555d1e54a ("gpiolib: add support for scope-based management to
gpio_device") sought to add scope-based gpio_device refcounting, but
erroneously forgot a negation of IS_ERR_OR_NULL().
As a result, gpio_device_put() is not called if the gpio_device pointer
is valid (meaning the ref is leaked), but only called if the pointer is
NULL or an ERR_PTR().
While at it drop a superfluous trailing semicolon.
Fixes: 9e4555d1e54a ("gpiolib: add support for scope-based management to gpio_device")
Signed-off-by: Lukas Wunner <[email protected]>
Signed-off-by: Bartosz Golaszewski <[email protected]>
|
|
virtqueue_enable_cb() will call virtqueue_poll() which will check if
queue is broken at beginning, so remove the virtqueue_is_broken() call
Acked-by: Jason Wang <[email protected]>
Signed-off-by: Li RongQing <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Filesystems should use folio->index and folio->mapping, instead of
folio_index(folio), folio_mapping() and folio_file_mapping() since
they know that it's in the pagecache.
Change this automagically with:
perl -p -i -e 's/folio_mapping[(]([^)]*)[)]/\1->mapping/g' fs/erofs/*.c
perl -p -i -e 's/folio_file_mapping[(]([^)]*)[)]/\1->mapping/g' fs/erofs/*.c
perl -p -i -e 's/folio_index[(]([^)]*)[)]/\1->index/g' fs/erofs/*.c
Reported-by: Matthew Wilcox <[email protected]>
Signed-off-by: David Howells <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
Cc: Chao Yu <[email protected]>
Cc: Yue Hu <[email protected]>
Cc: Jeffle Xu <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Gao Xiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
__dentry_leases_walk() gets a callback and calls it for
a bunch of denties; there are exactly two callers and
we already have a flag telling them apart - lwc->dir_lease.
Seeing that indirect calls are costly these days, let's
get rid of the callback and just call the right function
directly. Has a side benefit of saner signatures...
[ xiubli: a minor fix in the commit title ]
Signed-off-by: Al Viro <[email protected]>
Reviewed-by: Xiubo Li <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
|
|
Clean up the code.
Signed-off-by: Al Viro <[email protected]>
Reviewed-by: Xiubo Li <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
|
|
This issue is reported by smatch that get_quota_realm() might return
ERR_PTR but we did not handle it. It's not a immediate bug, while we
still should address it to avoid potential bugs if get_quota_realm()
is changed to return other ERR_PTR in future.
Set ceph_snap_realm's pointer in get_quota_realm()'s to address this
issue, the pointer would be set to NULL if get_quota_realm() failed
to get struct ceph_snap_realm, so no ERR_PTR would happen any more.
[ xiubli: minor code style clean up ]
Signed-off-by: Wenchao Hao <[email protected]>
Reviewed-by: Xiubo Li <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
|
|
When allocating an osd request the libceph.ko will add the
'read_from_replica' flag by default.
Signed-off-by: Xiubo Li <[email protected]>
Reviewed-by: Ilya Dryomov <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
|
|
Update the oldest_client_tid via the session renew caps msg to
make sure that the MDSs won't pile up the completed request list
in a very large size.
[ idryomov: drop inapplicable comment ]
Link: https://tracker.ceph.com/issues/63364
Signed-off-by: Xiubo Li <[email protected]>
Reviewed-by: Ilya Dryomov <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
|
|
Makes the create session msg helper to be more general and could
be used by other ops.
Signed-off-by: Xiubo Li <[email protected]>
Reviewed-by: Ilya Dryomov <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
|
|
The kconfig options for filesystems that support FS_ENCRYPTION are
supposed to select FS_ENCRYPTION_ALGS. This is needed to ensure that
required crypto algorithms get enabled as loadable modules or builtin as
is appropriate for the set of enabled filesystems. Do this for CEPH_FS
so that there aren't any missing algorithms if someone happens to have
CEPH_FS as their only enabled filesystem that supports encryption.
Cc: [email protected]
Fixes: f061feda6c54 ("ceph: add fscrypt ioctls and ceph.fscrypt.auth vxattr")
Signed-off-by: Eric Biggers <[email protected]>
Reviewed-by: Xiubo Li <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
|
|
The lock order is incorrect between denty and its parent, we should
always make sure that the parent get the lock first.
But since this deadcode is never used and the parent dir will always
be set from the callers, let's just remove it.
Link: https://lore.kernel.org/r/20231116081919.GZ1957730@ZenIV
Reported-by: Al Viro <[email protected]>
Signed-off-by: Xiubo Li <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
|
|
In fscrypt case and for a smaller read length we can predict the
max count of the extent map. And for small read length use cases
this could save some memories.
[ idryomov: squash into a single patch to avoid build break, drop
redundant variable in ceph_alloc_sparse_ext_map() ]
Signed-off-by: Xiubo Li <[email protected]>
Reviewed-by: Ilya Dryomov <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
|
|
There is no any limit for the extent array size and it's possible
that when reading with a large size contents the total number of
extents will exceed 4096. Then the messager will fail by reseting
the connection and keeps resending the inflight IOs infinitely.
[ idryomov: adjust error message ]
Link: https://tracker.ceph.com/issues/62081
Signed-off-by: Xiubo Li <[email protected]>
Reviewed-by: Ilya Dryomov <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
|
|
Following along the same lines as per the user-space fix. Right
now this isn't really an issue with the ceph kernel driver because
of the feature bit laginess, however, that can change over time
(when the new snaprealm info type is ported to the kernel driver)
and depending on the MDS version that's being upgraded can cause
message decoding issues - so, fix that early on.
Link: http://tracker.ceph.com/issues/63188
Signed-off-by: Venky Shankar <[email protected]>
Reviewed-by: Xiubo Li <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
|
|
When MDS closed the session the kclient will send to reconnect to
it immediately, but if the MDS just restarted and still not ready
yet, such as still in the up:replay state and the sessionmap journal
logs hasn't be replayed, the MDS will close the session.
And then the kclient could remove the session and later when the
mdsmap is in RECONNECT phrase it will skip reconnecting. But the MDS
will wait until timeout and then evict the kclient.
Just skip sending the reconnection request until the MDS is ready.
Link: https://tracker.ceph.com/issues/62489
Signed-off-by: Xiubo Li <[email protected]>
Reviewed-by: Ilya Dryomov <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
|
|
Requesting all memory regions on PVC will fill bo->placements up to
XE_BO_MAX_PLACEMENTS. The subsequent call to try_add_stolen() will trip
over the bounds checking even though XE_PL_STOLEN is not expected to
be used in this case.
This is hit with igt@xe_exec_fault_mode@once-basic-prefetch:
xe 0000:8c:00.0: [drm] Assertion `*c < (sizeof(bo->placements) / sizeof((bo->placements)[0]) + ((int)(sizeof(struct { int:(-!!(__builtin_types_compatible_p(typeof((bo->placements)), typeof(&(bo->placements)[0])))); }))))` failed!
WARNING: CPU: 30 PID: 6161 at drivers/gpu/drm/xe/xe_bo.c:203 __xe_bo_placement_for_flags+0x218/0x240 [xe]
Is fixed here by moving the bounds checks closer to where we actually
write into the bo->placement array.
Fixes: 8c54ee8a8606 ("drm/xe: Ensure that we don't access the placements array out-of-bounds")
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Matthew Brost <[email protected]>
Signed-off-by: Brian Welty <[email protected]>
Reviewed-by: Matthew Brost <[email protected]>
(cherry picked from commit 52e3fa3e3ea3ee05e32c1a8d72bb3ae306a4da64)
Signed-off-by: Thomas Hellström <[email protected]>
|
|
Since the migrate code is using the identity map for addressing VRAM,
copy chunks may become as small as 64K if the VRAM resource is fragmented.
However, a chunk size smaller that 1MiB may lead to the *next* chunk's
offset into the CCS metadata backup memory may not be page-aligned, and
the XY_CTRL_SURF_COPY_BLT command can't handle that, and even if it could,
the current code doesn't handle the offset calculaton correctly.
To fix this, make sure we align the size of VRAM copy chunks to 1MiB. If
the remaining data to copy is smaller than that, that's not a problem,
so use the remaining size. If the VRAM copy cunk becomes fragmented due
to the size alignment restriction, don't use the identity map, but instead
emit PTEs into the page-table like we do for system memory.
v2:
- Rebase
v3:
- Future proof somewhat by taking into account the real data size to
flat CCS metadata size ratio. (Matt Roper)
- Invert a couple of if-statements for better readability.
- Fix support for 4K-granularity VRAM sizes. (Tested on DG1).
v4:
- Fix up code comments
- Fix debug printout format typo.
v5:
- Add a Fixes: tag.
Cc: Matt Roper <[email protected]>
Cc: Matthew Auld <[email protected]>
Cc: Matthew Brost <[email protected]>
Fixes: e89b384cde62 ("drm/xe/migrate: Update emit_pte to cope with a size level than 4k")
Signed-off-by: Thomas Hellström <[email protected]>
Reviewed-by: Matthew Auld <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit ef51d7542d143f3fd9a48d4e2c307563661668aa)
Signed-off-by: Thomas Hellström <[email protected]>
|
|
Drop the "&vm->lock" before returning.
Fixes: 24f947d58fe5 ("drm/xe: Use DRM GPUVM helpers for external- and evicted objects")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Matthew Brost <[email protected]>
(cherry picked from commit cf46019e8550a810cc023af7aa020ba43103b44d)
Signed-off-by: Thomas Hellström <[email protected]>
|
|
Check if "bo" is an error pointer before calling xe_bo_lock() on it.
Fixes: d6abc18d6693 ("drm/xe/xe2: Modify xe_bo_test for system memory")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Matthew Brost <[email protected]>
(cherry picked from commit 88ec23528b32ddb9ce2e8492f2629b0056353697)
Signed-off-by: Thomas Hellström <[email protected]>
|
|
This error path should clean up before returning.
Smatch detected this bug:
drivers/gpu/drm/xe/xe_device.c:487 xe_device_probe() warn: missing unwind goto?
Fixes: 4cb12b71923b ("drm/xe/xe2: Determine bios enablement for flat ccs on igfx")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Matthew Brost <[email protected]>
(cherry picked from commit c10da95afa68060e13c5f920d96671943a7e54d9)
Signed-off-by: Thomas Hellström <[email protected]>
|
|
Building drivers/gpu/drm/xe/xe_gt_pagefault.c with GCC 11 results
in the following build errors:
./include/linux/fortify-string.h:57:33: error: writing 16 bytes into a region of size 0 [-Werror=stringop-overflow=]
57 | #define __underlying_memcpy __builtin_memcpy
| ^
./include/linux/fortify-string.h:644:9: note: in expansion of macro ‘__underlying_memcpy’
644 | __underlying_##op(p, q, __fortify_size); \
| ^~~~~~~~~~~~~
./include/linux/fortify-string.h:689:26: note: in expansion of macro ‘__fortify_memcpy_chk’
689 | #define memcpy(p, q, s) __fortify_memcpy_chk(p, q, s, \
| ^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/xe/xe_gt_pagefault.c:340:17: note: in expansion of macro ‘memcpy’
340 | memcpy(pf_queue->data + pf_queue->tail, msg, len * sizeof(u32));
| ^~~~~~
In file included from drivers/gpu/drm/xe/xe_device_types.h:17,
from drivers/gpu/drm/xe/xe_vm_types.h:16,
from drivers/gpu/drm/xe/xe_bo.h:13,
from drivers/gpu/drm/xe/xe_gt_pagefault.c:16:
drivers/gpu/drm/xe/xe_gt_types.h:102:25: note: at offset [1144, 265324] into destination object ‘tile’ of size 8
102 | struct xe_tile *tile;
| ^~~~
Fix these by removing -Wstringop-overflow from drm/xe builds.
Closes: https://lore.kernel.org/all/45ad1d0f-a10f-483e-848a-76a30252edbe@paulmck-laptop/
Fixes: 7a8bc11782d3 ("drm/xe: Enable W=1 warnings by default")
Suggested-by: Stephen Rothwell <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
[ This particular warning is broken on GCC11. In future changes it will
be moved to the normal C flags in the top level Makefile (out of
Makefile.extrawarn), but accounting for the compiler support. Just
remove it out of xe's forced extra warnings for now ]
Signed-off-by: Lucas De Marchi <[email protected]>
(cherry picked from commit a109d19992294736abd4f4232ea639e03eb1f9e7)
Signed-off-by: Thomas Hellström <[email protected]>
|
|
Don't set SLPC GuC feature ctl flag if skip_guc_pc is true.
v2: Skip the freq related sysfs creation as well (Badal)
v3: Remove unnecessary parenthesis (Lucas)
Fixes: 975e4a3795d4 ("drm/xe: Manually setup C6 when skip_guc_pc is set")
Fixes: bef52b5c7a19 ("drm/xe: Create a xe_gt_freq component for raw management and sysfs")
Reviewed-by: Lucas De Marchi <[email protected]>
Signed-off-by: Vinay Belgaumkar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rodrigo Vivi <[email protected]>
(cherry picked from commit 69cac0a8f3ef8db4d62441c4a2686ec676c9facd)
Signed-off-by: Thomas Hellström <[email protected]>
|
|
After exec_queue has been created, we cannot simply modify q->priority.
This needs to be done by the backend via q->ops. However in this case,
it would be more efficient to simply pass a flag when creating the
exec_queue and set the desired priority upfront during queue creation.
To that end: new flag EXEC_QUEUE_FLAG_HIGH_PRIORITY is introduced.
The priority field is moved to be with other scheduling properties and
is now exec_queue.sched_props.priority. This is no longer set to initial
value by the backend, but is now set within __xe_exec_queue_create().
Fixes: b4eecedc75c1 ("drm/xe: Fix potential deadlock handling page faults")
Signed-off-by: Brian Welty <[email protected]>
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Matthew Brost <[email protected]>
(cherry picked from commit a8004af338f6b3319476ecbed63ea49bf393fc1f)
Signed-off-by: Thomas Hellström <[email protected]>
|
|
We need to set q->priority prior to calling guc_exec_queue_add_msg() as
that will call init_policies() and sets the scheduling properties to those
stored in the exec_queue.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Brian Welty <[email protected]>
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Matthew Brost <[email protected]>
(cherry picked from commit b16483f9f8120b530327879fa3ea576e897946da)
Signed-off-by: Thomas Hellström <[email protected]>
|
|
The pointer points to IO memory, but the __iomem annotation was
incorrectly placed. Annotate it correctly, update its usage accordingly
and fix the corresponding sparse error.
Fixes: d8b52a02cb40 ("drm/xe: Implement stolen memory.")
Cc: Maarten Lankhorst <[email protected]>
Cc: Matthew Brost <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Signed-off-by: Thomas Hellström <[email protected]>
Reviewed-by: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit dcddb6f0b06d454c9a3b2b240a43f0e7310c7f7c)
Signed-off-by: Thomas Hellström <[email protected]>
|
|
There are a couple of pointers pointing to MMIO space. Annotate them
with __iomem and fix the corresponding sparse warnings.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Fixes: 3b0d4a557996 ("drm/xe: Move register MMIO into xe_tile")
Fixes: 399a13323f0d ("drm/xe: add 28-bit address support in struct xe_reg")
Cc: Rodrigo Vivi <[email protected]>
Cc: Matthew Brost <[email protected]>
Cc: Lucas De Marchi <[email protected]>
Cc: Matt Roper <[email protected]>
Cc: Koby Elbaz <[email protected]>
Cc: Ofir Bitton <[email protected]>
Cc: Moti Haimovski <[email protected]>
Signed-off-by: Thomas Hellström <[email protected]>
Reviewed-by: Lucas De Marchi <[email protected]>
Reviewed-by: Matt Roper <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 9d612ee52c6096bc70d43f54921ba2831ffbf1ad)
Signed-off-by: Thomas Hellström <[email protected]>
|
|
The pointer points to IO memory, but the __iomem annotation was
incorrectly placed. Annotate it correctly, update its usage accordingly
and fix the corresponding sparse error.
Fixes: 0887a2e7ab62 ("drm/xe: Make xe_mem_region struct")
Cc: Oak Zeng <[email protected]>
Cc: Michael J. Ruhl <[email protected]>
Cc: Matthew Brost <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Signed-off-by: Thomas Hellström <[email protected]>
Reviewed-by: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 20855b62a30538361e587cfc7c5245f07d4f826a)
Signed-off-by: Thomas Hellström <[email protected]>
|
|
The regs pointer points to IO memory. Annotate it properly and
fix the corresponding sparse warning.
Fixes: a4e2f3a299ea ("drm/xe: refactor xe_mmio_probe_tiles to support MMIO extension")
Cc: Koby Elbaz <[email protected]>
Cc: Ofir Bitton <[email protected]>
Cc: Moti Haimovski <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Signed-off-by: Thomas Hellström <[email protected]>
Reviewed-by: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 9d03bf30e78673d827484bbc17a6fd8f5e43a039)
Signed-off-by: Thomas Hellström <[email protected]>
|
|
If using the VM_BIND_OP_UNMAP_ALL without any bound vmas for the
vm, we will end up dereferencing an uninitialized variable and leak a
bo lock. Fix this.
v2:
- Updated commit message (Lucas De Marchi)
Reported-by: Dafna Hirschfeld <[email protected]>
Closes: https://lore.kernel.org/intel-xe/jrwua7ckbiozfcaodx4gg2h4taiuxs53j5zlpf3qzvyhyiyl2d@pbs3plurokrj/
Suggested-by: Dafna Hirschfeld <[email protected]>
Fixes: b06d47be7c83 ("drm/xe: Port Xe to GPUVA")
Signed-off-by: Thomas Hellström <[email protected]>
Acked-by: Lucas De Marchi <[email protected]>
Reviewed-by: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 9d0c1c5618be02c5acda7e6bbb728007b0632984)
Signed-off-by: Thomas Hellström <[email protected]>
|
|
The intent is to return -EWOULDBLOCK to the user if a long running exec
queue is full during the exec IOCTL. -EWOULDBLOCK aliases to -EAGAIN
which results in the exec IOCTL doing a retry loop. Fix this by ensuring
the retry loop is broken when returning -EWOULDBLOCK.
Fixes: 8ae8a2e8dd21 ("drm/xe: Long running job update")
Reported-by: Sai Gowtham Ch <[email protected]>
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Brian Welty <[email protected]>
(cherry picked from commit 97d0047cbb17318431eaf37dfe1a6855539340f9)
Signed-off-by: Thomas Hellström <[email protected]>
|
|
i915 defines it as unsigned long so Xe should do the same to avoid
compilation warnings:
CC [M] drivers/gpu/drm/i915/i915_gem.o
CC [M] drivers/gpu/drm/xe/i915-display/intel_display_power_well.o
In file included from ./include/drm/drm_mm.h:51,
from drivers/gpu/drm/xe/xe_bo_types.h:11,
from drivers/gpu/drm/xe/xe_bo.h:11,
from ./drivers/gpu/drm/xe/compat-i915-headers/gem/i915_gem_object.h:11,
from ./drivers/gpu/drm/xe/compat-i915-headers/i915_drv.h:15,
from drivers/gpu/drm/i915/display/intel_display_power.c:8:
drivers/gpu/drm/i915/display/intel_display_power.c: In function ‘print_async_put_domains_state’:
drivers/gpu/drm/i915/display/intel_display_power.c:408:29: warning: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 5 has type ‘int’ [-Wformat=]
408 | drm_dbg(&i915->drm, "async_put_wakeref %lu\n",
| ^~~~~~~~~~~~~~~~~~~~~~~~~
409 | power_domains->async_put_wakeref);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| |
| int
./include/drm/drm_print.h:410:39: note: in definition of macro ‘drm_dev_dbg’
410 | __drm_dev_dbg(NULL, dev, cat, fmt, ##__VA_ARGS__)
| ^~~
./include/drm/drm_print.h:510:33: note: in expansion of macro ‘drm_dbg_driver’
510 | #define drm_dbg(drm, fmt, ...) drm_dbg_driver(drm, fmt, ##__VA_ARGS__)
| ^~~~~~~~~~~~~~
drivers/gpu/drm/i915/display/intel_display_power.c:408:9: note: in expansion of macro ‘drm_dbg’
408 | drm_dbg(&i915->drm, "async_put_wakeref %lu\n",
| ^~~~~~~
drivers/gpu/drm/i915/display/intel_display_power.c:408:50: note: format string is defined here
408 | drm_dbg(&i915->drm, "async_put_wakeref %lu\n",
| ~~^
| |
| long unsigned int
| %u
CC [M] drivers/gpu/drm/i915/i915_gem_evict.o
CC [M] drivers/gpu/drm/i915/i915_gem_gtt.o
CC [M] drivers/gpu/drm/xe/i915-display/intel_display_trace.o
CC [M] drivers/gpu/drm/xe/i915-display/intel_display_wa.o
CC [M] drivers/gpu/drm/i915/i915_query.o
Fixes: 44e694958b95 ("drm/xe/display: Implement display support")
Cc: Maarten Lankhorst <[email protected]>
Reviewed-by: Jani Nikula <[email protected]>
Signed-off-by: José Roberto de Souza <[email protected]>
(cherry picked from commit fdbadf504375886a0320ac6f84c850322a6b32e1)
Signed-off-by: Thomas Hellström <[email protected]>
|
|
After commit 106397376c036 ("sbitmap: fix batching wakeup"), we may wake
up more than one queue for each batch. Just remove stale comment that
we wake up only one queue for each batch.
Signed-off-by: Kemeng Shi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Commit 99e603874366
("blk-cgroup: pass a gendisk to the blkg allocation helpers") changed
blkg_alloc() to take a struct gendisk instead of a struct request_queue,
but the documentation comment still referred to q.
So, update that comment to refer to disk instead and fix a typo.
Signed-off-by: Nicky Chorley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Warnings related to missing data in firmware manifest have
proven to be too verbose. This relates to description of
DSP module cost expressed in cycles per chunk (CPC). If
a matching value is not found in the manifest, kernel will
pass a zero value and DSP firmware will use a conservative
value in its place.
Downgrade the warnings to dev_dbg().
Fixes: d8a2c9879349 ("ASoC: SOF: ipc4-loader/topology: Query the CPC value from manifest")
Signed-off-by: Kai Vehmanen <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Reviewed-by: Liam Girdwood <[email protected]>
Signed-off-by: Peter Ujfalusi <[email protected]>
Link: https://msgid.link/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
LLP is supported by I2S and SDW platforms but not supported by HDA
platforms. This log is used to notify developer current LLP status
for current device. Since above case is known to developers, the log
is unnecessary and should be removed.
Fixes: 7cb19007baba ("ASoC: SOF: ipc4-pcm: add hw_params")
Signed-off-by: Rander Wang <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Signed-off-by: Peter Ujfalusi <[email protected]>
Link: https://msgid.link/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Since 64f67b5240db ("leds: trigger: audio: Add an activate callback to
ensure the initial brightness is set") the audio triggers have an
activate callback which sets the LED brightness as soon as the
(default) trigger is bound to the LED device. So we can remove the
call to ledtrig_audio_get.
Positive side effect: We have no code dependency to ledtrig-audio any
longer, therefore, if built as module, it's no longer loaded if not
needed.
Signed-off-by: Heiner Kallweit <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
The recent code change introduced a few false-positive compile
warnings with -Wformat-trucation again. Suppress them by replacing
snprintf() with scnprintf().
Fixes: 0a995e38dc44 ("ALSA: scarlett2: Add support for software-controllable input gain")
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Clang static checker warning: Value stored to 'ret' is never read.
bgpio_init() returns error code if failed, it's better to add this
check.
Fixes: cd33f216d241 ("gpio: mlxbf3: Add gpio driver support")
Signed-off-by: Su Hui <[email protected]>
[Bartosz: add the Fixes: tag]
Signed-off-by: Bartosz Golaszewski <[email protected]>
|
|
Node address doesn't match reg property which is not correct.
Fixes: ba96b2e7974b ("dt-bindings: gpio: gpio-xilinx: Convert Xilinx axi gpio binding to YAML")
Signed-off-by: Michal Simek <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Bartosz Golaszewski <[email protected]>
|
|
The "data->irqs[]" array holds unsigned int so this error handling will
not work correctly.
Fixes: eee636bff0dc ("gpio: rtd: Add support for Realtek DHC(Digital Home Center) RTD SoCs")
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Bartosz Golaszewski <[email protected]>
|
|
Update the kernel-doc comments to catch up with the code changes and
fix the kernel-doc warnings:
debug.c:83: warning: Excess struct member 'stacktrace' description in 'dma_debug_entry'
debug.c:83: warning: Function parameter or struct member 'stack_len' not described in 'dma_debug_entry'
debug.c:83: warning: Function parameter or struct member 'stack_entries' not described in 'dma_debug_entry'
Fixes: 746017ed8d4d ("dma/debug: Simplify stracktrace retrieval")
Signed-off-by: Randy Dunlap <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Marek Szyprowski <[email protected]>
Cc: Robin Murphy <[email protected]>
Cc: [email protected]
Signed-off-by: Christoph Hellwig <[email protected]>
|
|
It appears on TU106 GPUs (2070), that some of the nvdec engines
are in the runlist but have no valid nonstall interrupt, nouveau
didn't handle that too well.
This should let nouveau/gsp work on those.
Cc: [email protected] # v6.7+
Signed-off-by: Dave Airlie <[email protected]>
Link: https://lore.kernel.org/all/[email protected]/
|
|
When smb2 leases is disable, ksmbd can send oplock break notification
and cause wait oplock break ack timeout. It may appear like hang when
accessing a directory. This patch make only v2 leases handle the
directory.
Cc: [email protected]
Signed-off-by: Namjae Jeon <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
A fix for the v3d register readout, and two compilation fixes for
rockchip.
Signed-off-by: Dave Airlie <[email protected]>
From: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/warlsyhbwarbezejzokxvrpnmvoaajonj6khjobvnfrhttrsks@fqoeqrjrct6l
|
|
The hotjoin syfs entry allows to enable or disable Hot-Join on the Current
Controller of the I3C Bus.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
|