aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2009-06-23V4L/DVB (12098): Create table for customize stv0900 ts registers.Igor M. Liplianin4-5/+42
Signed-off-by: Igor M. Liplianin <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2009-06-23V4L/DVB (12097): Implement reading uncorrected blocks for stv0900Abylay Ospan1-0/+39
Signed-off-by: Abylay Ospan <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2009-06-23V4L/DVB (12096): Bug fix: stv0900 register read must using i2c in one ↵Abylay Ospan1-20/+20
transaction Signed-off-by: Abylay Ospan <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2009-06-23V4L/DVB (12095): Change lnbh24 configure bits for NetUP card.Igor M. Liplianin1-2/+4
Signed-off-by: Igor M. Liplianin <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2009-06-23V4L/DVB (12093): gspca_sonixj: Name saturation control saturation, not colorHans de Goede1-2/+2
Name saturation control saturation, not color and make the default less saturated (the old default was overdoing it). Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2009-06-23V4L/DVB (12092): gspca_sonixj + ov7630: invert vflip control instead of ↵Hans de Goede1-9/+9
changing default gspca_sonixj + ov7630 had the default value for flip enabled, as otherwise the picture is upside down. It is better to instead invert the meaning of the control in the set function, and have the default be no vflip, as one would expect vflip enabled to be upside down. Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2009-06-23V4L/DVB (12091): gspca_sonixj: Add light frequency controlHans de Goede1-10/+123
gspca_sonixj: Add light frequency control Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2009-06-23V4L/DVB (12090): gspca_sonixj: enable autogain control for the ov7620Hans de Goede1-2/+2
gspca_sonixj: enable autogain control for the ov7620, and not only make it enable autogain but also auto exposure (and do the same for the ov7648). Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2009-06-23V4L/DVB (12089): gspca_sonixj: increase 640x480 frame-buffersizeHans de Goede1-1/+2
gspca_sonixj: increase 640x480 frame-buffersize, as I was getting buffer overflows during my testing of a "Premier" 0c45:613e cam Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2009-06-23V4L/DVB (12088): Mark the v4l1 uvcvideo quickcam messenger driver as deprecatedHans de Goede1-1/+4
Mark the v4l1 uvcvideo quickcam messenger driver as deprecated, the one cam it supports, is now also supported by the v4l2 gspca stv06xx driver. Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2009-06-23V4L/DVB (12087): gspca_sonixj: enable support for 0c45:613e cameraHans de Goede1-3/+4
gspca_sonixj: enable support for 0c45:613e camera, and slightly tweak the ov7630 register init values for a much better picture. Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2009-06-23V4L/DVB (12086): gspca_sonixj: Fix control index numberingHans de Goede1-3/+9
The control index defines for the gspca_sonixj driver were numbered wrong, causing us to disable the wrong controls on various sensors Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2009-06-23V4L/DVB (12085): gspca_ov519: constify ov518 inititial register value tablesHans de Goede1-3/+3
gspca_ov519: constify ov518 inititial register value tables Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2009-06-23V4L/DVB (12084): ov511: mark as deprecatedHans de Goede1-1/+5
Mark the v4l1 ov511 as deprecated as we now have ov511 support in the gspca ov519 driver. Note we should really also keep track of this in Documentation/feature-removal-schedule.txt, but that is not part of the v4l-dvb tree. Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2009-06-23V4L/DVB (12083): ov511: remove ov518 usb id's from the driverHans de Goede1-2/+0
ov511: remove ov518 usb id's from the driver, as they have not been working ever since the decompression code got removed from the kernel, and they are no supported by the gspca_ov519 module. Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2009-06-23V4L/DVB (12082): gspca_stv06xx: Add support for st6422 bridge and sensorHans de Goede7-15/+577
Add support for st6422 bridge and sensor to the stv06xx gspca sub driver, tested with: Logitech QuickCam Messenger 046d:08f0 ST6422 integrated Logitech QuickCam Mess. Plus 046d:08f6 ST6422 integrated Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2009-06-23V4L/DVB (12081): gspca_ov519: Cleanup some sensor special casesHans de Goede1-20/+4
gspca_ov519: Cleanup some sensor special cases Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2009-06-23V4L/DVB (12080): gspca_ov519: Fix ov518+ with OV7620AE (Trust spacecam 320)Hans de Goede1-36/+55
gspca_ov519: Fix ov518+ with OV7620AE (Trust spacecam 320) Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2009-06-23V4L/DVB (12079): gspca_ov519: add support for the ov511 bridgeHans de Goede2-13/+521
gspca_ov519: add support for the ov511 bridge Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2009-06-23V4L/DVB (12078): gspca_ov519: Better default contrast for ov6630Hans de Goede1-1/+4
Hmm, another one with an extra if (life sucks) the default contrast really is no good for the ov6630, it isn't even high enough in full daylight, this gives the ov6630 a different initial value for a better out of the box experience. Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2009-06-23V4L/DVB (12077): gspca_ov519: Fix 320x240 with ov7660 sensorHans de Goede1-2/+6
As reported on the ov51x-jpeg list, and as I can confirm with my own cam the ov7670 in 320x240 has a number of broken columns of pixels at the left of the picture. This was not present in the old driver as it always used 640x480 and did software downscaling (took me a while to figure that one out). The fix adds a sensor specific if in so far sensor neutral code :( But this is the only way to fix this, this cannot be fixed by only changing sensor registers. Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2009-06-23V4L/DVB (12076): gspca_ov519: Fix led inversion with some camsHans de Goede1-3/+13
My ov519 cam has it led inverted, the same has been reported on the ov51x-jpeg list for another creative cam. This patch fixes this without changing the behaviour for other cams. Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2009-06-23V4L/DVB (12075): gspca_ov519: check ov518 packet numbersHans de Goede1-6/+23
Check ov518 packet numbers to detect dropped packets. Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2009-06-23V4L/DVB (12074): gspca_ov519: Add 320x240 and 160x120 support for cif sensor ↵Hans de Goede1-3/+30
cams gspca_ov519: Add 320x240 and 160x120 support for cif sensor cams Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2009-06-23V4L/DVB (12073): gspca_ov519: limit ov6630 qvif uv swap fix to ov66308AFHans de Goede1-14/+24
The fix for the UV swapping in qcif mode with the ov6630, which I did to fix this issue on a ov518 cam with an ov66308AF, causes UV swapping in qcif with another cam of mine with the ov518 and an ov66308AE, so this patch changes the code to differentiate between the ov66308AF and other ov6630 versions, and restricts the UV swap fix to the ov66308AF. Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2009-06-23V4L/DVB (12072): gspca-ov519: add extra controlsHans de Goede2-10/+207
This patch adds autobrightness (so that it can be turned off to make the already present brightness control work) and light frequency filtering controls. The lightfreq control needed 2 different entries in the ctrls array, as the number of options differs depending on the sensor. Always one of the 2 entires is disabled ofcourse. Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2009-06-23V4L/DVB (12071): gspca: fix NULL pointer deref in query_ctrlHans de Goede1-5/+3
gspca: fix NULL pointer deref in query_ctrl Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2009-06-23V4L/DVB (12010): cx88: Properly support Leadtek TV2000 XP GlobalMauro Carvalho Chehab2-22/+78
Fix Leadtek TV2000 XP Global entries and add missing PCI ID's. Thanks to Terry Wu <[email protected]> for pointing us for the proper settings. Cc: Terry Wu <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2009-06-22mlx4_core: Fix dma_sync_single_for_cpu() with matching for_device() callsRoland Dreier1-4/+10
Commit 5d23a1d2 ("net: replace dma_sync_single with dma_sync_single_for_cpu") replaced uses of the deprectated function dma_sync_single() with calls to dma_sync_single_for_cpu(). However, to be correct, the code should do a sync for_cpu() before touching the memory and for_device() after it's done. Signed-off-by: Roland Dreier <[email protected]>
2009-06-22IB/mthca: Replace dma_sync_single() use with proper functionsRoland Dreier1-3/+10
dma_sync_single() is deprecated now, and the use in mthca is wrong: there should be a dma_sync_single_for_cpu() before touching the memory from the CPU, and a dma_sync_single_for_device() afterwards. Fix this, prompted by a kick in the pants from a patch from FUJITA Tomonori <[email protected]>. Signed-off-by: Roland Dreier <[email protected]>
2009-06-23libata: don't set IORDY for resetTejun Heo1-4/+9
Before issuing reset, libata configures xfermode to PIO0 which makes some drivers turn on IORDY which may cause the controller to lock up if the port is not occupied. IORDY isn't necessary at this point anyway. Make ata_pio_need_iordy() return zero if it's being called for reset. This fixes bko#11703. Reported and tracked down by Daniel Gnoutcheff and Constantine Gavrilov. Signed-off-by: Tejun Heo <[email protected]> Reported-by: Daniel Gnoutcheff <[email protected]> Cc: Constantine Gavrilov <[email protected]> Cc: Alan Cox <[email protected]> Signed-off-by: Jeff Garzik <[email protected]>
2009-06-23sata_fsl: Add power mgmt supportDave Liu1-0/+35
Signed-off-by: Dave Liu <[email protected]> Signed-off-by: Liu Yu <[email protected]> Signed-off-by: Kumar Gala <[email protected]> Signed-off-by: Jeff Garzik <[email protected]>
2009-06-23[libata] PATA driver for CF interface on AT91SAM9260 SoCSergey Matyukevich3-0/+370
This patch provides PATA driver for CompactFlash interface in True IDE mode on AT91SAM9260 SoC. Signed-off-by: Sergey Matyukevich <[email protected]> Signed-off-by: Jeff Garzik <[email protected]>
2009-06-23[libata] beautify module parametersEvgeni Golov1-6/+6
1. add defaults to description where possible 2. add value definition (off=0, on=1) where missing v2: reformatted as per request by Jeff Garzik <[email protected]> "Enable foo (0=off, 1=on [default])" Signed-off-by: Evgeni Golov <[email protected]> Signed-off-by: Jeff Garzik <[email protected]>
2009-06-22RDMA/nes: Fix FIN state handling under error conditionsFaisal Latif1-3/+5
During cluster testing, one QP was not closed, as FIN is not handled properly when its rexmit count expires or in some cases when RST is is received after sending FIN. The reason is that the cm_id does not get decremented under these conditions. Signed-off-by: Faisal Latif <[email protected]> Signed-off-by: Roland Dreier <[email protected]>
2009-06-22RDMA/nes: Fix max_qp_init_rd_atom returned from query deviceFaisal Latif1-1/+1
In nes_query_device(), max_qp_init_rd_atom is incorrectly set to max_qp_wr. This was found when a test application had a dapl async event error. Signed-off-by: Faisal Latif <[email protected]> Signed-off-by: Roland Dreier <[email protected]>
2009-06-22IB/ehca: Ensure that guid_entry index is not negativeRoel Kluin1-1/+1
This prevents the memcpy() of a guid_entries element using a negative index. Signed-off-by: Roel Kluin <[email protected]> Signed-off-by: Roland Dreier <[email protected]>
2009-06-22IB/ehca: Tolerate dynamic memory operations before driver loadHannes Hering3-17/+522
Implement toleration of dynamic memory operations and 16 GB gigantic pages, where "toleration" means that the driver can cope with dynamic memory operations that happen before the driver is loaded. While the ehca driver is loaded, dynamic memory operations are still prohibited by returning NOTIFY_BAD from the memory notifier. On module load the driver walks through available system memory, checks for available memory ranges and then registers the kernel internal memory region accordingly. The translation of address ranges is implemented via a 3-level busmap. Signed-off-by: Hannes Hering <[email protected]> Signed-off-by: Roland Dreier <[email protected]>
2009-06-22Merge branch 'for-linus' of ↵Linus Torvalds82-1216/+1530
git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (27 commits) Blackfin: fix dma-mapping build errors Blackfin: hook up new perf_counter_open syscall Blackfin: drop BF535-specific text for exception 0x2A (unaligned instruction) Blackfin: fix early crash when booting on wrong cpu Blackfin: fix GPTMR0_CLOCKSOURCE dependency on BFIN_GPTIMERS Blackfin: drop unused ISP1760 port1_disable from board resources Blackfin: bf526-ezbrd: handle different SDRAM chips Blackfin: fix typo in TRAS define in mem_init.h header Blackfin: unify memory map headers Blackfin: stick the CPU name into boot image name Blackfin: update defconfigs Blackfin: decouple unrelated cache settings to get exact behavior Blackfin: update I-pipe patch level Blackfin: remove obsolete mcount support from I-pipe code Blackfin: allow CONFIG_TICKSOURCE_GPTMR0 with interrupt pipeline Blackfin: convert interrupt pipeline to irqflags Blackfin: allow people to select BF51x-0.1 silicon rev Blackfin: bf526-ezbrd: set SPI flash resources to SST device Blackfin: fix accidental reset in some boot modes Blackfin: abstract irq14 lowering in do_irq ...
2009-06-22Merge git://git.infradead.org/~dwmw2/iommu-2.6.31Linus Torvalds17-217/+754
* git://git.infradead.org/~dwmw2/iommu-2.6.31: intel-iommu: Fix one last ia64 build problem in Pass Through Support VT-d: support the device IOTLB VT-d: cleanup iommu_flush_iotlb_psi and flush_unmaps VT-d: add device IOTLB invalidation support VT-d: parse ATSR in DMA Remapping Reporting Structure PCI: handle Virtual Function ATS enabling PCI: support the ATS capability intel-iommu: dmar_set_interrupt return error value intel-iommu: Tidy up iommu->gcmd handling intel-iommu: Fix tiny theoretical race in write-buffer flush. intel-iommu: Clean up handling of "caching mode" vs. IOTLB flushing. intel-iommu: Clean up handling of "caching mode" vs. context flushing. VT-d: fix invalid domain id for KVM context flush Fix !CONFIG_DMAR build failure introduced by Intel IOMMU Pass Through Support Intel IOMMU Pass Through Support Fix up trivial conflicts in drivers/pci/{intel-iommu.c,intr_remapping.c}
2009-06-22Merge branch 'for-linus' of ↵Linus Torvalds8-136/+1807
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: new stack is no longer experimental firewire: net: better FIFO address range check and rcodes firewire: net: fix card driver reloading firewire: core: fix iso context shutdown on card removal firewire: core: fix DMA unmapping in iso buffer removal firewire: net: adjust net_device ops firewire: net: remove unused code firewire: net: allow for unordered unit discovery firewire: net: style changes firewire: net: add Kconfig item, rename driver firewire: add IPv4 support
2009-06-22NFS: Correct the NFS mount path when following a referralTrond Myklebust1-0/+24
Signed-off-by: Trond Myklebust <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-22NFS: Fix nfs_path() to always return a '/' at the beginning of the pathTrond Myklebust1-0/+5
Signed-off-by: Trond Myklebust <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-22NFSv4: Replace nfs4_path_walk() with VFS path lookup in a private namespaceTrond Myklebust1-21/+157
As noted in the previous patch, the NFSv4 client mount code currently has several limitations. If the mount path contains symlinks, or referrals, or even if it just contains a '..', then the client code in nfs4_path_walk() will fail with an error. This patch replaces the nfs4_path_walk()-based lookup with a helper function that sets up a private namespace to represent the namespace on the server, then uses the ordinary VFS and NFS path lookup code to walk down the mount path in that namespace. Signed-off-by: Trond Myklebust <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-22VFS: Add VFS helper functions for setting up private namespacesTrond Myklebust2-8/+38
The purpose of this patch is to improve the remote mount path lookup support for distributed filesystems such as the NFSv4 client. When given a mount command of the form "mount server:/foo/bar /mnt", the NFSv4 client is required to look up the filehandle for "server:/", and then look up each component of the remote mount path "foo/bar" in order to find the directory that is actually going to be mounted on /mnt. Following that remote mount path may involve following symlinks, crossing server-side mount points and even following referrals to filesystem volumes on other servers. Since the standard VFS path lookup code already supports walking paths that contain all these features (using in-kernel automounts for following referrals) we would like to be able to reuse that rather than duplicate the full path traversal functionality in the NFSv4 client code. This patch therefore defines a VFS helper function create_mnt_ns(), that sets up a temporary filesystem namespace and attaches a root filesystem to it. It exports the create_mnt_ns() and put_mnt_ns() function for use by filesystem modules. Signed-off-by: Trond Myklebust <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-22VFS: Uninline the function put_mnt_ns()Trond Myklebust2-10/+7
In order to allow modules to use it without having to export vfsmount_lock. Signed-off-by: Trond Myklebust <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-22mm/init: cpu_hotplug_init() must be initialized before SLABLinus Torvalds3-14/+5
SLAB uses get/put_online_cpus() which use a mutex which is itself only initialized when cpu_hotplug_init() is called. Currently we hang suring boot in SLAB due to doing that too late. Reported by James Bottomley and Sachin Sant (and possibly others). Debugged by Benjamin Herrenschmidt. This just removes the dynamic initialization of the data structures, and replaces it with a static one, avoiding this dependency entirely, and removing one unnecessary special initcall. Tested-by: Sachin Sant <[email protected]> Tested-by: James Bottomley <[email protected]> Tested-by: Benjamin Herrenschmidt <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-22drm/i915: Fix HDMI regression introduced in new chipset supportZhenyu Wang1-2/+1
Remove wrongly added NULL_PACKETS_DURING_VSYNC setting for HDMI. Signed-off-by: Zhenyu Wang <[email protected]> Signed-off-by: Eric Anholt <[email protected]>
2009-06-22drm/i915: fix LFP data fetchJesse Barnes1-1/+11
Apparently the proper way to do this is to use the LFP data pointer block to figure out the LFP data block entry size, then use that plus the panel index to calculate an offset into the LFP data block array. Similar fix has already been pushed to the 2D driver to fix fdo bug applied to the VBIOS reader, and things look sane). Signed-off-by: Jesse Barnes <[email protected]> Signed-off-by: Eric Anholt <[email protected]>
2009-06-22drm/i915: set TV detection mode when tv is already connected[email protected]1-28/+25
We used load_detect_temp flag to determine whether to set tv to the test mode. However if the TV already has a mode set, we still need to set the test mode to determine connection. This results in blinking, but there is no other reliable way to determine TV connection. freedesktop.org bug #22035 Signed-off-by: Ma Ling <[email protected]> Signed-off-by: Eric Anholt <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.