| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
We still need to wait for the initial OA configuration to happen
before we enable OA report writes to the OA buffer.
Reported-by: Lionel Landwerlin <[email protected]>
Fixes: 15d0ace1f876 ("drm/i915/perf: execute OA configuration from command stream")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1356
Testcase: igt/perf/stream-open-close
Signed-off-by: Chris Wilson <[email protected]>
Cc: Lionel Landwerlin <[email protected]>
Reviewed-by: Lionel Landwerlin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 4b4e973d5eb89244b67d3223b60f752d0479f253)
Signed-off-by: Jani Nikula <[email protected]>
|
|
In the initial MIO support introduced in
commit 71ba41c9b1d9 ("s390/pci: provide support for MIO instructions")
zpci_map_resource() and zpci_setup_resources() default to using the
mio_wb address as the resource's start address. This means users of the
mapping, which includes most drivers, will get write combining on PCI
Stores. This may lead to problems when drivers expect write through
behavior when not using an explicit ioremap_wc().
Cc: [email protected]
Fixes: 71ba41c9b1d9 ("s390/pci: provide support for MIO instructions")
Signed-off-by: Niklas Schnelle <[email protected]>
Reviewed-by: Pierre Morel <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>
|
|
On s390 there currently is no implementation of pud_write(). That was ok
as long as we had our own implementation of get_user_pages_fast() which
checked for pud protection by testing the bit directly w/o using
pud_write(). The other callers of pud_write() are not reachable on s390.
After commit 1a42010cdc26 ("s390/mm: convert to the generic
get_user_pages_fast code") we use the generic get_user_pages_fast(), which
does call pud_write() in pud_access_permitted() for FOLL_WRITE access on
a large pud. Without an s390 specific pud_write(), the generic version is
called, which contains a BUG() statement to remind us that we don't have a
proper implementation. This results in a kernel panic.
Fix this by providing an implementation of pud_write().
Cc: <[email protected]> # 5.2+
Fixes: 1a42010cdc26 ("s390/mm: convert to the generic get_user_pages_fast code")
Signed-off-by: Gerald Schaefer <[email protected]>
Reviewed-by: Heiko Carstens <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>
|
|
Commit 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS dependency")
removed select for DEBUG_FS but we still need it for development purposes.
Fixes: 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS dependency")
Signed-off-by: Dinh Nguyen <[email protected]>
|
|
If scatter-gather operation is allowed, a large USB request is split
into multiple TRBs. For preparing TRBs for sg list, driver iterates
over the list and creates TRB for each sg and mark the chain bit to
false for the last sg. The current IOMMU driver is clubbing the list
of sgs which shares a page boundary into one and giving it to USB driver.
With this the number of sgs mapped it not equal to the the number of sgs
passed. Because of this USB driver is not marking the chain bit to false
since it couldn't iterate to the last sg. This patch addresses this issue
by marking the chain bit to false if it is the last mapped sg.
At a practical level, this patch resolves USB transfer stalls
seen with adb on dwc3 based db845c, pixel3 and other qcom
hardware after functionfs gadget added scatter-gather support
around v4.20.
Credit also to Anurag Kumar Vulisha <[email protected]>
who implemented a very similar fix to this issue.
Cc: Felipe Balbi <[email protected]>
Cc: Yang Fei <[email protected]>
Cc: Thinh Nguyen <[email protected]>
Cc: Tejas Joglekar <[email protected]>
Cc: Andrzej Pietrasiewicz <[email protected]>
Cc: Jack Pham <[email protected]>
Cc: Todd Kjos <[email protected]>
Cc: Greg KH <[email protected]>
Cc: Linux USB List <[email protected]>
Cc: stable <[email protected]> #4.20+
Signed-off-by: Pratham Pratap <[email protected]>
[jstultz: Slight tweak to remove sg_is_last() usage, reworked
commit message, minor comment tweak]
Signed-off-by: John Stultz <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Reviewing a fresh portion of coverity defects in USB core
(specifically CID 1458999), Alan Stern noted below in [1]:
On Tue, Feb 25, 2020 at 02:39:23PM -0500, Alan Stern wrote:
> A revised search finds line 997 in drivers/usb/core/hub.c and lines
> 216, 269 in drivers/usb/core/port.c. (I didn't try looking in any
> other directories.) AFAICT all three of these should check the
> return value, although a error message in the kernel log probably
> isn't needed.
Factor out the usb_port_runtime_{resume,suspend}() changes into a
standalone patch to allow conflict-free porting on top of stable v3.9+.
[1] https://lore.kernel.org/lkml/[email protected]
Fixes: 971fcd492cebf5 ("usb: add runtime pm support for usb port device")
Cc: [email protected] # v3.9+
Suggested-by: Alan Stern <[email protected]>
Signed-off-by: Eugeniu Rosca <[email protected]>
Acked-by: Alan Stern <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Reviewing a fresh portion of coverity defects in USB core
(specifically CID 1458999), Alan Stern noted below in [1]:
On Tue, Feb 25, 2020 at 02:39:23PM -0500, Alan Stern wrote:
> A revised search finds line 997 in drivers/usb/core/hub.c and lines
> 216, 269 in drivers/usb/core/port.c. (I didn't try looking in any
> other directories.) AFAICT all three of these should check the
> return value, although a error message in the kernel log probably
> isn't needed.
Factor out the usb_remove_device() change into a standalone patch to
allow conflict-free integration on top of the earliest stable branches.
[1] https://lore.kernel.org/lkml/[email protected]
Fixes: 253e05724f9230 ("USB: add a "remove hardware" sysfs attribute")
Cc: [email protected] # v2.6.33+
Suggested-by: Alan Stern <[email protected]>
Signed-off-by: Eugeniu Rosca <[email protected]>
Acked-by: Alan Stern <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Address below Coverity complaint (Feb 25, 2020, 8:06 AM CET):
*** CID 1458999: Error handling issues (CHECKED_RETURN)
/drivers/usb/core/hub.c: 1869 in hub_probe()
1863
1864 if (id->driver_info & HUB_QUIRK_CHECK_PORT_AUTOSUSPEND)
1865 hub->quirk_check_port_auto_suspend = 1;
1866
1867 if (id->driver_info & HUB_QUIRK_DISABLE_AUTOSUSPEND) {
1868 hub->quirk_disable_autosuspend = 1;
>>> CID 1458999: Error handling issues (CHECKED_RETURN)
>>> Calling "usb_autopm_get_interface" without checking return value (as is done elsewhere 97 out of 111 times).
1869 usb_autopm_get_interface(intf);
1870 }
1871
1872 if (hub_configure(hub, &desc->endpoint[0].desc) >= 0)
1873 return 0;
1874
Rather than checking the return value of 'usb_autopm_get_interface()',
switch to the usb_autopm_get_interface_no_resume() API, as per:
On Tue, Feb 25, 2020 at 10:32:32AM -0500, Alan Stern wrote:
------ 8< ------
> This change (i.e. 'ret = usb_autopm_get_interface') is not necessary,
> because the resume operation cannot fail at this point (interfaces
> are always powered-up during probe). A better solution would be to
> call usb_autopm_get_interface_no_resume() instead.
------ 8< ------
Fixes: 1208f9e1d758c9 ("USB: hub: Fix the broken detection of USB3 device in SMSC hub")
Cc: Hardik Gajjar <[email protected]>
Cc: [email protected] # v4.14+
Reported-by: [email protected]
Suggested-by: Alan Stern <[email protected]>
Signed-off-by: Eugeniu Rosca <[email protected]>
Acked-by: Alan Stern <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Current driver has 240 (USB2.0) and 2048 (USB3.0) as max_sectors,
e.g., /sys/bus/scsi/devices/0:0:0:0/max_sectors
If data access times out, driver error handling will issue a port
reset.
Sometimes Samsung Fit (090C:1000) flash disk will not respond to
later Set Address or Get Descriptor command.
Adding this quirk to limit max_sectors to 64 sectors to avoid issue
occurring.
Signed-off-by: Jim Lin <[email protected]>
Acked-by: Alan Stern <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
LPM on the device appears to cause xHCI host controllers to claim
that there isn't enough bandwidth to support additional devices.
Signed-off-by: Dan Lazewatsky <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Gustavo Padovan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Commit 4d7201cda226 ("usb: usb251xb: add vdd supply support") didn't
covered the non-DT use-case and so the regualtor_enable() call during
probe will fail on those platforms. Also the commit didn't handled the
error case correctly.
Move devm_regulator_get() out of usb251xb_get_ofdata() to address the
1st issue. This can be done without worries because devm_regulator_get()
handles the non-DT use-case too. Add devm_add_action_or_reset() to
address the 2nd bug.
Fixes: 4d7201cda226 ("usb: usb251xb: add vdd supply support")
Signed-off-by: Marco Felsch <[email protected]>
Cc: stable <[email protected]>
Acked-by: Richard Leitner <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Arguments are supposed to be ordered high then low.
Fixes: a228890f9458 ("phy: allwinner: add phy driver for USB3 PHY on Allwinner H6 SoC")
Signed-off-by: Rikard Falkeborn <[email protected]>
Tested-by: Ondrej Jirman <[email protected]>
Signed-off-by: Ondrej Jirman <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Acked-by: Chen-Yu Tsai <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
If there are TRBs pending during reset endpoint operation, the
DMA will advance after reset operation, but it isn't expected,
since the data is not yet available (For OUT, the data is not
yet available). After the data is ready, there won't be any
interrupt since the EP_TRADDR already points to next TRB entry
and doorbell is not set.
To fix it, it toggles cycle bit before reset operation, and restores
it after reset, it could avoid unexpected DMA advance due to
cycle bit is for software during the endpoint reset operation.
Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
Signed-off-by: Peter Chen <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
It has marked the dequeue trb as link trb, but its next segment
pointer is still itself, it causes the transfer can't go on. Fix
it by set its pointer as the trb address for the next request.
Fixes: f616c3bda47e ("usb: cdns3: Fix dequeue implementation")
Signed-off-by: Peter Chen <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/fixes
arm64: dts: agilex: fix gmac compatible
- The compatible for Agilex GMAC should be "altr,socfpga-stmmac-a10-s10"
* tag 'socfpga_dts_fix_for_v5.6_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: (578 commits)
arm64: dts: socfpga: agilex: Fix gmac compatible
Linux 5.6-rc4
KVM: VMX: check descriptor table exits on instruction emulation
ext4: potential crash on allocation error in ext4_alloc_flex_bg_array()
macintosh: therm_windtunnel: fix regression when instantiating devices
jbd2: fix data races at struct journal_head
kvm: x86: Limit the number of "kvm: disabled by bios" messages
KVM: x86: avoid useless copy of cpufreq policy
KVM: allow disabling -Werror
KVM: x86: allow compiling as non-module with W=1
KVM: Pre-allocate 1 cpumask variable per cpu for both pv tlb and pv ipis
KVM: Introduce pv check helpers
KVM: let declaration of kvm_get_running_vcpus match implementation
KVM: SVM: allocate AVIC data structures based on kvm_amd module parameter
MAINTAINERS: Correct Cadence PCI driver path
io_uring: fix 32-bit compatability with sendmsg/recvmsg
net: dsa: mv88e6xxx: Fix masking of egress port
mlxsw: pci: Wait longer before accessing the device after reset
sfc: fix timestamp reconstruction at 16-bit rollover points
vsock: fix potential deadlock in transport->release()
...
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
|
|
Pull cifs fixes from Steve French:
"Five small cifs/smb3 fixes, two for stable (one for a reconnect
problem and the other fixes a use case when renaming an open file)"
* tag '5.6-rc4-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Use #define in cifs_dbg
cifs: fix rename() by ensuring source handle opened with DELETE bit
cifs: add missing mount option to /proc/mounts
cifs: fix potential mismatch of UNC paths
cifs: don't leak -EAGAIN for stat() during reconnect
|
|
Signed-off-by: Jonathan Neuschäfer <[email protected]>
Signed-off-by: Rob Herring <[email protected]>
|
|
Signed-off-by: Jonathan Neuschäfer <[email protected]>
Signed-off-by: Rob Herring <[email protected]>
|
|
Signed-off-by: Jonathan Neuschäfer <[email protected]>
Signed-off-by: Rob Herring <[email protected]>
|
|
DE2 VI layer doesn't support blending which means alpha channel is
ignored. Replace all formats with alpha with "don't care" (X) channel.
Fixes: 7480ba4d7571 ("drm/sun4i: Add support for DE2 VI planes")
Acked-by: Maxime Ripard <[email protected]>
Signed-off-by: Jernej Skrabec <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
DE3 VI layers support alpha blending, but DE2 VI layers do not.
Additionally, DE3 VI layers support 10-bit RGB and YUV formats.
Make a separate list for DE3.
Fixes: c50519e6db4d ("drm/sun4i: Add basic support for DE3")
Acked-by: Maxime Ripard <[email protected]>
Signed-off-by: Jernej Skrabec <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
YUV444 and YVU444 are planar formats, but HW format RGB888 is packed.
This means that those two mappings were never correct. Remove them.
Fixes: 60a3dcf96aa8 ("drm/sun4i: Add DE2 definitions for YUV formats")
Acked-by: Maxime Ripard <[email protected]>
Signed-off-by: Jernej Skrabec <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
This is only called from adt7462_update_device(). The caller expects it
to return zero on error. I fixed a similar issue earlier in commit
a4bf06d58f21 ("hwmon: (adt7462) ADT7462_REG_VOLT_MAX() should return 0")
but I missed this one.
Fixes: c0b4e3ab0c76 ("adt7462: new hwmon driver")
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
|
|
This is a necessary follow up to the first fix I proposed and we merged
in 2669b8b0c79 ("binder: prevent UAF for binderfs devices"). I have been
overly optimistic that the simple fix I proposed would work. But alas,
ihold() + iput() won't work since the inodes won't survive the
destruction of the superblock.
So all we get with my prior fix is a different race with a tinier
race-window but it doesn't solve the issue. Fwiw, the problem lies with
generic_shutdown_super(). It even has this cozy Al-style comment:
if (!list_empty(&sb->s_inodes)) {
printk("VFS: Busy inodes after unmount of %s. "
"Self-destruct in 5 seconds. Have a nice day...\n",
sb->s_id);
}
On binder_release(), binder_defer_work(proc, BINDER_DEFERRED_RELEASE) is
called which punts the actual cleanup operation to a workqueue. At some
point, binder_deferred_func() will be called which will end up calling
binder_deferred_release() which will retrieve and cleanup the
binder_context attach to this struct binder_proc.
If we trace back where this binder_context is attached to binder_proc we
see that it is set in binder_open() and is taken from the struct
binder_device it is associated with. This obviously assumes that the
struct binder_device that context is attached to is _never_ freed. While
that might be true for devtmpfs binder devices it is most certainly
wrong for binderfs binder devices.
So, assume binder_open() is called on a binderfs binder devices. We now
stash away the struct binder_context associated with that struct
binder_devices:
proc->context = &binder_dev->context;
/* binderfs stashes devices in i_private */
if (is_binderfs_device(nodp)) {
binder_dev = nodp->i_private;
info = nodp->i_sb->s_fs_info;
binder_binderfs_dir_entry_proc = info->proc_log_dir;
} else {
.
.
.
proc->context = &binder_dev->context;
Now let's assume that the binderfs instance for that binder devices is
shutdown via umount() and/or the mount namespace associated with it goes
away. As long as there is still an fd open for that binderfs binder
device things are fine. But let's assume we now close the last fd for
that binderfs binder device. Now binder_release() is called and punts to
the workqueue. Assume that the workqueue has quite a bit of stuff to do
and doesn't get to cleaning up the struct binder_proc and the associated
struct binder_context with it for that binderfs binder device right
away. In the meantime, the VFS is killing the super block and is
ultimately calling sb->evict_inode() which means it will call
binderfs_evict_inode() which does:
static void binderfs_evict_inode(struct inode *inode)
{
struct binder_device *device = inode->i_private;
struct binderfs_info *info = BINDERFS_I(inode);
clear_inode(inode);
if (!S_ISCHR(inode->i_mode) || !device)
return;
mutex_lock(&binderfs_minors_mutex);
--info->device_count;
ida_free(&binderfs_minors, device->miscdev.minor);
mutex_unlock(&binderfs_minors_mutex);
kfree(device->context.name);
kfree(device);
}
thereby freeing the struct binder_device including struct
binder_context.
Now the workqueue finally has time to get around to cleaning up struct
binder_proc and is now trying to access the associate struct
binder_context. Since it's already freed it will OOPs.
Fix this by introducing a refounct on binder devices.
This is an alternative fix to 51d8a7eca677 ("binder: prevent UAF read in
print_binder_transaction_log_entry()").
Fixes: 3ad20fe393b3 ("binder: implement binderfs")
Fixes: 2669b8b0c798 ("binder: prevent UAF for binderfs devices")
Fixes: 03e2e07e3814 ("binder: Make transaction_log available in binderfs")
Related : 51d8a7eca677 ("binder: prevent UAF read in print_binder_transaction_log_entry()")
Cc: [email protected]
Signed-off-by: Christian Brauner <[email protected]>
Acked-by: Todd Kjos <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
All the loaded module locates in the region [＆_end-2G，VMALLOC_END] at
runtime, so the distance from the module start to the end of the kernel
image does not exceed 2GB. Hence, the code model of the kernel module can
be changed to medany to improve the performance data access.
Signed-off-by: Vincent Chen <[email protected]>
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
The compiler uses the PIC-relative method to access static variables
instead of GOT when the code model is PIC. Therefore, the limitation of
the access range from the instruction to the symbol address is +-2GB.
Under this circumstance, the kernel cannot load a kernel module if this
module has static per-CPU symbols declared by DEFINE_PER_CPU(). The reason
is that kernel relocates the .data..percpu section of the kernel module to
the end of kernel's .data..percpu. Hence, the distance between the per-CPU
symbols and the instruction will exceed the 2GB limits. To solve this
problem, the kernel should place the loaded module in the memory area
[&_end-2G, VMALLOC_END].
Signed-off-by: Vincent Chen <[email protected]>
Suggested-by: Alexandre Ghiti <[email protected]>
Suggested-by: Anup Patel <[email protected]>
Tested-by: Alexandre Ghiti <[email protected]>
Tested-by: Carlos de Paula <[email protected]>
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
Changes made during the 5.6 cycle warrant bumping the version number
for DM core and the targets modified by this commit.
It should be noted that dm-thin, dm-crypt and dm-raid already had
their target version bumped during the 5.6 merge window.
Signed-off-by; Mike Snitzer <[email protected]>
|
|
We neither assign congested_fn for requested-based blk-mq device nor
implement it correctly. So fix both.
Also, remove incorrect comment from dm_init_normal_md_queue and rename
it to dm_init_congested_fn.
Fixes: 4aa9c692e052 ("bdi: separate out congested state into a separate struct")
Cc: [email protected]
Signed-off-by: Hou Tao <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
|
|
Variables declared in a switch statement before any case statements
cannot be automatically initialized with compiler instrumentation (as
they are not part of any execution flow). With GCC's proposed automatic
stack variable initialization feature, this triggers a warning (and they
don't get initialized). Clang's automatic stack variable initialization
(via CONFIG_INIT_STACK_ALL=y) doesn't throw a warning, but it also
doesn't initialize such variables[1]. Note that these warnings (or silent
skipping) happen before the dead-store elimination optimization phase,
so even when the automatic initializations are later elided in favor of
direct initializations, the warnings remain.
To avoid these problems, move such variables into the "case" where
they're used or lift them up into the main function body.
fs/fcntl.c: In function ‘send_sigio_to_task’:
fs/fcntl.c:738:20: warning: statement will never be executed [-Wswitch-unreachable]
738 | kernel_siginfo_t si;
| ^~
[1] https://bugs.llvm.org/show_bug.cgi?id=44916
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Jeff Layton <[email protected]>
|
|
Fix gmac compatible string to "altr,socfpga-stmmac-a10-s10". Gmac for
Agilex should use same compatible as Stratix 10.
Fixes: 4b36daf9ada3 ("arm64: dts: agilex: Add initial support for Intel's Agilex SoCFPGA")
Cc: [email protected]
Signed-off-by: Ley Foon Tan <[email protected]>
Signed-off-by: Dinh Nguyen <[email protected]>
|
|
In cases where dec_in_flight() has to requeue the integrity_bio_wait
work to transfer the rest of the data, the bio's __bi_remaining might
already have been decremented to 0, e.g.: if bio passed to underlying
data device was split via blk_queue_split().
Use dm_bio_{record,restore} rather than effectively open-coding them in
dm-integrity -- these methods now manage __bi_remaining too.
Depends-on: f7f0b057a9c1 ("dm bio record: save/restore bi_end_io and bi_integrity")
Reported-by: Daniel Glöckner <[email protected]>
Suggested-by: Mikulas Patocka <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
|
|
Also, save/restore __bi_remaining in case the bio was used in a
BIO_CHAIN (e.g. due to blk_queue_split).
Suggested-by: Mikulas Patocka <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
|
|
btrfs_lookup_and_bind_dio_csum() does pointer arithmetic which assumes
32-bit checksums. If using a larger checksum, this leads to spurious
failures when a direct I/O read crosses a stripe. This is easy
to reproduce:
# mkfs.btrfs -f --checksum blake2 -d raid0 /dev/vdc /dev/vdd
...
# mount /dev/vdc /mnt
# cd /mnt
# dd if=/dev/urandom of=foo bs=1M count=1 status=none
# dd if=foo of=/dev/null bs=1M iflag=direct status=none
dd: error reading 'foo': Input/output error
# dmesg | tail -1
[ 135.821568] BTRFS warning (device vdc): csum failed root 5 ino 257 off 421888 ...
Fix it by using the actual checksum size.
Fixes: 1e25a2e3ca0d ("btrfs: don't assume ordered sums to be 4 bytes")
CC: [email protected] # 5.4+
Reviewed-by: Johannes Thumshirn <[email protected]>
Signed-off-by: Omar Sandoval <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
|
|
We're passing "&posn" instead of "posn" so it ends up corrupting
memory instead of doing something useful.
Fixes: 53e0c72d98ba ("ASoC: SOF: Add support for IPC IO between DSP and Host")
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Modify pre-divider for system clock.
Signed-off-by: Jack Yu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Just like with PCI options ROMs, which we save in the setup_efi_pci*
functions from arch/x86/boot/compressed/eboot.c, the EFI code / ROM itself
sometimes may contain data which is useful/necessary for peripheral drivers
to have access to.
Specifically the EFI code may contain an embedded copy of firmware which
needs to be (re)loaded into the peripheral. Normally such firmware would be
part of linux-firmware, but in some cases this is not feasible, for 2
reasons:
1) The firmware is customized for a specific use-case of the chipset / use
with a specific hardware model, so we cannot have a single firmware file
for the chipset. E.g. touchscreen controller firmwares are compiled
specifically for the hardware model they are used with, as they are
calibrated for a specific model digitizer.
2) Despite repeated attempts we have failed to get permission to
redistribute the firmware. This is especially a problem with customized
firmwares, these get created by the chip vendor for a specific ODM and the
copyright may partially belong with the ODM, so the chip vendor cannot
give a blanket permission to distribute these.
This commit adds support for finding peripheral firmware embedded in the
EFI code and makes the found firmware available through the new
efi_get_embedded_fw() function.
Support for loading these firmwares through the standard firmware loading
mechanism is added in a follow-up commit in this patch-series.
Note we check the EFI_BOOT_SERVICES_CODE for embedded firmware near the end
of start_kernel(), just before calling rest_init(), this is on purpose
because the typical EFI_BOOT_SERVICES_CODE memory-segment is too large for
early_memremap(), so the check must be done after mm_init(). This relies
on EFI_BOOT_SERVICES_CODE not being free-ed until efi_free_boot_services()
is called, which means that this will only work on x86 for now.
Reported-by: Dave Olsthoorn <[email protected]>
Suggested-by: Peter Jones <[email protected]>
Acked-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
Sometimes it is useful to be able to dump the efi boot-services code and
data. This commit adds these as debugfs-blobs to /sys/kernel/debug/efi,
but only if efi=debug is passed on the kernel-commandline as this requires
not freeing those memory-regions, which costs 20+ MB of RAM.
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Acked-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
When we allocate memory, kasprintf() can fail and we must check its
return value.
Fixes: 05309830e1f8 ("interconnect: Add a name to struct icc_path")
Signed-off-by: Georgi Djakov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
altera_get_note is called from altera_init, where key is kzalloc(33).
When the allocation functions are annotated to allow the compiler to see
the sizes of objects, and with FORTIFY_SOURCE, we see:
In file included from drivers/misc/altera-stapl/altera.c:14:0:
In function ‘strlcpy’,
inlined from ‘altera_init’ at drivers/misc/altera-stapl/altera.c:2189:5:
include/linux/string.h:378:4: error: call to ‘__write_overflow’ declared with attribute error: detected write beyond size of object passed as 1st parameter
__write_overflow();
^~~~~~~~~~~~~~~~~~
That refers to this code in altera_get_note:
if (key != NULL)
strlcpy(key, &p[note_strings +
get_unaligned_be32(
&p[note_table + (8 * i)])],
length);
The error triggers because the length of 'key' is 33, but the copy
uses length supplied as the 'length' parameter, which is always
256. Split the size parameter into key_len and val_len, and use the
appropriate length depending on what is being copied.
Detected by compiler error, only compile-tested.
Cc: "Igor M. Liplianin" <[email protected]>
Signed-off-by: Daniel Axtens <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/202002251042.D898E67AC@keescook
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
On binder_release(), binder_defer_work(proc, BINDER_DEFERRED_RELEASE) is
called which punts the actual cleanup operation to a workqueue. At some
point, binder_deferred_func() will be called which will end up calling
binder_deferred_release() which will retrieve and cleanup the
binder_context attach to this struct binder_proc.
If we trace back where this binder_context is attached to binder_proc we
see that it is set in binder_open() and is taken from the struct
binder_device it is associated with. This obviously assumes that the
struct binder_device that context is attached to is _never_ freed. While
that might be true for devtmpfs binder devices it is most certainly
wrong for binderfs binder devices.
So, assume binder_open() is called on a binderfs binder devices. We now
stash away the struct binder_context associated with that struct
binder_devices:
proc->context = &binder_dev->context;
/* binderfs stashes devices in i_private */
if (is_binderfs_device(nodp)) {
binder_dev = nodp->i_private;
info = nodp->i_sb->s_fs_info;
binder_binderfs_dir_entry_proc = info->proc_log_dir;
} else {
.
.
.
proc->context = &binder_dev->context;
Now let's assume that the binderfs instance for that binder devices is
shutdown via umount() and/or the mount namespace associated with it goes
away. As long as there is still an fd open for that binderfs binder
device things are fine. But let's assume we now close the last fd for
that binderfs binder device. Now binder_release() is called and punts to
the workqueue. Assume that the workqueue has quite a bit of stuff to do
and doesn't get to cleaning up the struct binder_proc and the associated
struct binder_context with it for that binderfs binder device right
away. In the meantime, the VFS is killing the super block and is
ultimately calling sb->evict_inode() which means it will call
binderfs_evict_inode() which does:
static void binderfs_evict_inode(struct inode *inode)
{
struct binder_device *device = inode->i_private;
struct binderfs_info *info = BINDERFS_I(inode);
clear_inode(inode);
if (!S_ISCHR(inode->i_mode) || !device)
return;
mutex_lock(&binderfs_minors_mutex);
--info->device_count;
ida_free(&binderfs_minors, device->miscdev.minor);
mutex_unlock(&binderfs_minors_mutex);
kfree(device->context.name);
kfree(device);
}
thereby freeing the struct binder_device including struct
binder_context.
Now the workqueue finally has time to get around to cleaning up struct
binder_proc and is now trying to access the associate struct
binder_context. Since it's already freed it will OOPs.
Fix this by holding an additional reference to the inode that is only
released once the workqueue is done cleaning up struct binder_proc. This
is an easy alternative to introducing separate refcounting on struct
binder_device which we can always do later if it becomes necessary.
This is an alternative fix to 51d8a7eca677 ("binder: prevent UAF read in
print_binder_transaction_log_entry()").
Fixes: 3ad20fe393b3 ("binder: implement binderfs")
Fixes: 03e2e07e3814 ("binder: Make transaction_log available in binderfs")
Related : 51d8a7eca677 ("binder: prevent UAF read in print_binder_transaction_log_entry()")
Cc: [email protected]
Signed-off-by: Christian Brauner <[email protected]>
Acked-by: Todd Kjos <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This reverts commit 0b96da639a4874311e9b5156405f69ef9fc3bef8.
We can't just go flushing random signals, under the assumption that the
OOM killer will just do something else. It's not safe from the OOM
perspective, and it could also cause other signals to get randomly lost.
Signed-off-by: Jens Axboe <[email protected]>
|
|
APF6 Dev compatible is armadeus,imx6dl-apf6dev and not
armadeus,imx6dl-apf6dldev.
Fixes: 3d735471d066 ("dt-bindings: arm: Document Armadeus SoM and Dev boards devicetree binding")
Signed-off-by: Sébastien Szymanski <[email protected]>
Signed-off-by: Rob Herring <[email protected]>
|
|
io_wq_flush() is buggy, during cancelation of a flush, the associated
work may be passed to the caller's (i.e. io_uring) @match callback. That
callback is expecting it to be embedded in struct io_kiocb. Cancelation
of internal work probably doesn't make a lot of sense to begin with.
As the flush helper is no longer used, just delete it and the associated
work flag.
Signed-off-by: Pavel Begunkov <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM-based SoCs defconfig file(s)
fixes for v5.6, please pull the following:
- Stefan restores CONFIG_DEBUG_FS from the bcm2835_defconfig which was
accidentally removed
* tag 'arm-soc/for-5.6/defconfig-fixes' of https://github.com/Broadcom/stblinux:
ARM: bcm2835_defconfig: Explicitly restore CONFIG_DEBUG_FS
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/fixes
Amlogic fixes for v5.6-rc
* tag 'amlogic-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
arm64: dts: meson: fix gxm-khadas-vim2 wifi
arm64: dts: meson-sm1-sei610: add missing interrupt-names
ARM: meson: Drop unneeded select of COMMON_CLK
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
|
|
The commit 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS dependency")
accidentally dropped the DEBUG FS support in bcm2835_defconfig. So
restore the config as before the commit.
Reported-by: Marek Szyprowski <[email protected]>
Fixes: 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS dependency")
Signed-off-by: Stefan Wahren <[email protected]>
Signed-off-by: Florian Fainelli <[email protected]>
|
|
Commit 68ca0fd272da ("selftest/lkdtm: Don't pollute 'git status'")
introduced patterns for git to ignore files generated in
tools/testing/selftests/lkdtm/
Use local .gitignore file instead of using the root one.
Fixes: 68ca0fd272da ("selftest/lkdtm: Don't pollute 'git status'")
Signed-off-by: Christophe Leroy <[email protected]>
Acked-by: Kees Cook <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
The packet handling function, specifically the iteration of the qp list
for mad packet processing misses locking RCU before running through the
list. Not only is this incorrect, but the list_for_each_entry_rcu() call
can not be called with a conditional check for lock dependency. Remedy
this by invoking the rcu lock and unlock around the critical section.
This brings MAD packet processing in line with what is done for non-MAD
packets.
Fixes: 7724105686e7 ("IB/hfi1: add driver files")
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Mike Marciniszyn <[email protected]>
Signed-off-by: Dennis Dalessandro <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
The purpose of commit 0fd85869c2a9 ("spi/bcm63xx-hsspi: keep pll clk enabled")
was to keep the pll clk enabled through the lifetime of the device.
In order to do that, some 'clk_prepare_enable()'/'clk_disable_unprepare()'
calls have been added in the error handling path of the probe function, in
the remove function and in the suspend and resume functions.
However, a 'clk_disable_unprepare()' call has been unfortunately left in
the probe function. So the commit seems to be more or less a no-op.
Axe it now, so that the pll clk is left enabled through the lifetime of
the device, as described in the commit.
Fixes: 0fd85869c2a9 ("spi/bcm63xx-hsspi: keep pll clk enabled")
Signed-off-by: Christophe JAILLET <[email protected]>
Acked-by: Jonas Gorski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
To cancel a work, io-wq sets IO_WQ_WORK_CANCEL and executes the
callback. However, IO_WQ_WORK_NO_CANCEL works will just execute and may
return next work, which will be ignored and lost.
Cancel the whole link.
Signed-off-by: Pavel Begunkov <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|