| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add and use a synthetic, KVM-defined page fault error code to indicate
whether a fault is to private vs. shared memory. TDX and SNP have
different mechanisms for reporting private vs. shared, and KVM's
software-protected VMs have no mechanism at all. Usurp an error code
flag to avoid having to plumb another parameter to kvm_mmu_page_fault()
and friends.
Alternatively, KVM could borrow AMD's PFERR_GUEST_ENC_MASK, i.e. set it
for TDX and software-protected VMs as appropriate, but that would require
*clearing* the flag for SEV and SEV-ES VMs, which support encrypted
memory at the hardware layer, but don't utilize private memory at the
KVM layer.
Opportunistically add a comment to call out that the logic for software-
protected VMs is (and was before this commit) broken for nested MMUs, i.e.
for nested TDP, as the GPA is an L2 GPA. Punt on trying to play nice with
nested MMUs as there is a _lot_ of functionality that simply doesn't work
for software-protected VMs, e.g. all of the paths where KVM accesses guest
memory need to be updated to be aware of private vs. shared memory.
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
WARN if bits 63:32 are non-zero when handling an intercepted legacy #PF,
as the error code for #PF is limited to 32 bits (and in practice, 16 bits
on Intel CPUS). This behavior is architectural, is part of KVM's ABI
(see kvm_vcpu_events.error_code), and is explicitly documented as being
preserved for intecerpted #PF in both the APM:
The error code saved in EXITINFO1 is the same as would be pushed onto
the stack by a non-intercepted #PF exception in protected mode.
and even more explicitly in the SDM as VMCS.VM_EXIT_INTR_ERROR_CODE is a
32-bit field.
Simply drop the upper bits if hardware provides garbage, as spurious
information should do no harm (though in all likelihood hardware is buggy
and the kernel is doomed).
Handling all upper 32 bits in the #PF path will allow moving the sanity
check on synthetic checks from kvm_mmu_page_fault() to npf_interception(),
which in turn will allow deriving PFERR_PRIVATE_ACCESS from AMD's
PFERR_GUEST_ENC_MASK without running afoul of the sanity check.
Note, this is also why Intel uses bit 15 for SGX (highest bit on Intel CPUs)
and AMD uses bit 31 for RMP (highest bit on AMD CPUs); using the highest
bit minimizes the probability of a collision with the "other" vendor,
without needing to plumb more bits through microcode.
Signed-off-by: Sean Christopherson <[email protected]>
Reviewed-by: Kai Huang <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Plumb the full 64-bit error code throughout the page fault handling code
so that KVM can use the upper 32 bits, e.g. SNP's PFERR_GUEST_ENC_MASK
will be used to determine whether or not a fault is private vs. shared.
Note, passing the 64-bit error code to FNAME(walk_addr)() does NOT change
the behavior of permission_fault() when invoked in the page fault path, as
KVM explicitly clears PFERR_IMPLICIT_ACCESS in kvm_mmu_page_fault().
Continue passing '0' from the async #PF worker, as guest_memfd and thus
private memory doesn't support async page faults.
Signed-off-by: Isaku Yamahata <[email protected]>
[mdr: drop references/changes on rebase, update commit message]
Signed-off-by: Michael Roth <[email protected]>
[sean: drop truncation in call to FNAME(walk_addr)(), rewrite changelog]
Signed-off-by: Sean Christopherson <[email protected]>
Reviewed-by: Xiaoyao Li <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Move the sanity check that hardware never sets bits that collide with KVM-
define synthetic bits from kvm_mmu_page_fault() to npf_interception(),
i.e. make the sanity check #NPF specific. The legacy #PF path already
WARNs if _any_ of bits 63:32 are set, and the error code that comes from
VMX's EPT Violatation and Misconfig is 100% synthesized (KVM morphs VMX's
EXIT_QUALIFICATION into error code flags).
Add a compile-time assert in the legacy #PF handler to make sure that KVM-
define flags are covered by its existing sanity check on the upper bits.
Opportunistically add a description of PFERR_IMPLICIT_ACCESS, since we
are removing the comment that defined it.
Signed-off-by: Sean Christopherson <[email protected]>
Reviewed-by: Kai Huang <[email protected]>
Reviewed-by: Binbin Wu <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Define more #NPF error code flags that are relevant to SEV+ (mostly SNP)
guests, as specified by the APM:
* Bit 31 (RMP): Set to 1 if the fault was caused due to an RMP check or a
VMPL check failure, 0 otherwise.
* Bit 34 (ENC): Set to 1 if the guest’s effective C-bit was 1, 0 otherwise.
* Bit 35 (SIZEM): Set to 1 if the fault was caused by a size mismatch between
PVALIDATE or RMPADJUST and the RMP, 0 otherwise.
* Bit 36 (VMPL): Set to 1 if the fault was caused by a VMPL permission
check failure, 0 otherwise.
Note, the APM is *extremely* misleading, and strongly implies that the
above flags can _only_ be set for #NPF exits from SNP guests. That is a
lie, as bit 34 (C-bit=1, i.e. was encrypted) can be set when running _any_
flavor of SEV guest on SNP capable hardware.
Signed-off-by: Sean Christopherson <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Open code the bit number directly in the PFERR_* masks and drop the
intermediate PFERR_*_BIT defines, as having to bounce through two macros
just to see which flag corresponds to which bit is quite annoying, as is
having to define two macros just to add recognition of a new flag.
Use ternary operator to derive the bit in permission_fault(), the one
function that actually needs the bit number as part of clever shifting
to avoid conditional branches. Generally the compiler is able to turn
it into a conditional move, and if not it's not really a big deal.
No functional change intended.
Signed-off-by: Sean Christopherson <[email protected]>
Reviewed-by: Paolo Bonzini <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Exit to userspace with -EFAULT / KVM_EXIT_MEMORY_FAULT if a private fault
triggers emulation of any kind, as KVM doesn't currently support emulating
access to guest private memory. Practically speaking, private faults and
emulation are already mutually exclusive, but there are many flow that
can result in KVM returning RET_PF_EMULATE, and adding one last check
to harden against weird, unexpected combinations and/or KVM bugs is
inexpensive.
Suggested-by: Yan Zhao <[email protected]>
Signed-off-by: Sean Christopherson <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Add mmio trace events support, currently generic mmio events
KVM_TRACE_MMIO_WRITE/xxx_READ/xx_READ_UNSATISFIED are added here.
Also vcpu id field is added for all kvm trace events, since perf
KVM tool parses vcpu id information for kvm entry event.
Signed-off-by: Bibo Mao <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
|
|
When VM runs in kvm mode, system will not exit to host mode when
executing a general software breakpoint instruction such as INSN_BREAK,
trap exception happens in guest mode rather than host mode. In order to
debug guest kernel on host side, one mechanism should be used to let VM
exit to host mode.
Here a hypercall instruction with a special code is used for software
breakpoint usage. VM exits to host mode and kvm hypervisor identifies
the special hypercall code and sets exit_reason with KVM_EXIT_DEBUG. And
then let qemu handle it.
Idea comes from ppc kvm, one api KVM_REG_LOONGARCH_DEBUG_INST is added
to get the hypercall code. VMM needs get sw breakpoint instruction with
this api and set the corresponding sw break point for guest kernel.
Signed-off-by: Bibo Mao <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
|
|
PARAVIRT config option and PV IPI is added for the guest side, function
pv_ipi_init() is used to add IPI sending and IPI receiving hooks. This
function firstly checks whether system runs in VM mode, and if kernel
runs in VM mode, it will call function kvm_para_available() to detect
the current hypervirsor type (now only KVM type detection is supported).
The paravirt functions can work only if current hypervisor type is KVM,
since there is only KVM supported on LoongArch now.
PV IPI uses virtual IPI sender and virtual IPI receiver functions. With
virtual IPI sender, IPI message is stored in memory rather than emulated
HW. IPI multicast is also supported, and 128 vcpus can received IPIs
at the same time like X86 KVM method. Hypercall method is used for IPI
sending.
With virtual IPI receiver, HW SWI0 is used rather than real IPI HW.
Since VCPU has separate HW SWI0 like HW timer, there is no trap in IPI
interrupt acknowledge. Since IPI message is stored in memory, there is
no trap in getting IPI message.
Signed-off-by: Bibo Mao <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
|
|
On LoongArch system, IPI hw uses iocsr registers. There are one iocsr
register access on IPI sending, and two iocsr access on IPI receiving
for the IPI interrupt handler. In VM mode all iocsr accessing will cause
VM to trap into hypervisor. So with one IPI hw notification there will
be three times of trap.
In this patch PV IPI is added for VM, hypercall instruction is used for
IPI sender, and hypervisor will inject an SWI to the destination vcpu.
During the SWI interrupt handler, only CSR.ESTAT register is written to
clear irq. CSR.ESTAT register access will not trap into hypervisor, so
with PV IPI supported, there is one trap with IPI sender, and no trap
with IPI receiver, there is only one trap with IPI notification.
Also this patch adds IPI multicast support, the method is similar with
x86. With IPI multicast support, IPI notification can be sent to at
most 128 vcpus at one time. It greatly reduces the times of trapping
into hypervisor.
Signed-off-by: Bibo Mao <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
|
|
Physical CPUID is used for interrupt routing for irqchips such as ipi,
msgint and eiointc interrupt controllers. Physical CPUID is stored at
the CSR register LOONGARCH_CSR_CPUID, it can not be changed once vcpu
is created and the physical CPUIDs of two vcpus cannot be the same.
Different irqchips have different size declaration about physical CPUID,
the max CPUID value for CSR LOONGARCH_CSR_CPUID on Loongson-3A5000 is
512, the max CPUID supported by IPI hardware is 1024, while for eiointc
irqchip is 256, and for msgint irqchip is 65536.
The smallest value from all interrupt controllers is selected now, and
the max cpuid size is defines as 256 by KVM which comes from the eiointc
irqchip.
Signed-off-by: Bibo Mao <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
|
|
Instruction cpucfg can be used to get processor features. And there
is a trap exception when it is executed in VM mode, and also it can be
used to provide cpu features to VM. On real hardware cpucfg area 0 - 20
is used by now. Here one specified area 0x40000000 -- 0x400000ff is used
for KVM hypervisor to provide PV features, and the area can be extended
for other hypervisors in future. This area will never be used for real
HW, it is only used by software.
Signed-off-by: Bibo Mao <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
|
|
On LoongArch system, there is a hypercall instruction special for
virtualization. When system executes this instruction on host side,
there is an illegal instruction exception reported, however it will
trap into host when it is executed in VM mode.
When hypercall is emulated, A0 register is set with value
KVM_HCALL_INVALID_CODE, rather than inject EXCCODE_INE invalid
instruction exception. So VM can continue to executing the next code.
Signed-off-by: Bibo Mao <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
|
|
Refine the ipi handling on LoongArch platform, there are three
modifications:
1. Add generic function get_percpu_irq(), replacing some percpu irq
functions such as get_ipi_irq()/get_pmc_irq()/get_timer_irq() with
get_percpu_irq().
2. Change definition about parameter action called by function
loongson_send_ipi_single() and loongson_send_ipi_mask(), and it is
defined as decimal encoding format at ipi sender side. Normal decimal
encoding is used rather than binary bitmap encoding for ipi action, ipi
hw sender uses decimal encoding code, and ipi receiver will get binary
bitmap encoding, the ipi hw will convert it into bitmap in ipi message
buffer.
3. Add a structure smp_ops on LoongArch platform so that pv ipi can be
used later.
Signed-off-by: Bibo Mao <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
|
|
|
|
epoll can call out to vfs_poll() with a file pointer that may race with
the last 'fput()'. That would make f_count go down to zero, and while
the ep->mtx locking means that the resulting file pointer tear-down will
be blocked until the poll returns, it means that f_count is already
dead, and any use of it won't actually get a reference to the file any
more: it's dead regardless.
Make sure we have a valid ref on the file pointer before we call down to
vfs_poll() from the epoll routines.
Link: https://lore.kernel.org/lkml/[email protected]/
Reported-by: [email protected]
Reviewed-by: Jens Axboe <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
- Fix error logging and check user-supplied data when injecting an
error in the versal EDAC driver
* tag 'edac_urgent_for_v6.9_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/versal: Do not log total error counts
EDAC/versal: Check user-supplied data before injecting an error
EDAC/versal: Do not register for NOC errors
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix incorrect delay handling in the plpks (keystore) code
- Fix a panic when an LPAR boots with a frozen PE
Thanks to Andrew Donnellan, Gaurav Batra, Nageswara R Sastry, and Nayna
Jain.
* tag 'powerpc-6.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries/iommu: LPAR panics during boot up with a frozen PE
powerpc/pseries: make max polling consistent for longer H_CALLs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Remove the broken vsyscall emulation code from
the page fault code
- Fix kexec crash triggered by certain SEV RMP
table layouts
- Fix unchecked MSR access error when disabling
the x2APIC via iommu=off
* tag 'x86-urgent-2024-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Remove broken vsyscall emulation code from the page fault code
x86/apic: Don't access the APIC when disabling x2APIC
x86/sev: Add callback to apply RMP table fixups for kexec
x86/e820: Add a new e820 table update helper
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Ingo Molnar:
"Fix suspicious RCU usage in __do_softirq()"
* tag 'irq-urgent-2024-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
softirq: Fix suspicious RCU usage in __do_softirq()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc/other driver fixes and new device ids
for 6.9-rc7 that resolve some reported problems.
Included in here are:
- iio driver fixes
- mei driver fix and new device ids
- dyndbg bugfix
- pvpanic-pci driver bugfix
- slimbus driver bugfix
- fpga new device id
All have been in linux-next with no reported problems"
* tag 'char-misc-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
slimbus: qcom-ngd-ctrl: Add timeout for wait operation
dyndbg: fix old BUG_ON in >control parser
misc/pvpanic-pci: register attributes via pci_driver
fpga: dfl-pci: add PCI subdevice ID for Intel D5005 card
mei: me: add lunar lake point M DID
mei: pxp: match against PCI_CLASS_DISPLAY_OTHER
iio:imu: adis16475: Fix sync mode setting
iio: accel: mxc4005: Reset chip on probe() and resume()
iio: accel: mxc4005: Interrupt handling fixes
dt-bindings: iio: health: maxim,max30102: fix compatible check
iio: pressure: Fixes SPI support for BMP3xx devices
iio: pressure: Fixes BME280 SPI driver data
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes for reported problems for
6.9-rc7. Included in here are:
- usb core fixes for found issues
- typec driver fixes for reported problems
- usb gadget driver fixes for reported problems
- xhci build fixes
- dwc3 driver fixes for reported issues
All of these have been in linux-next this past week with no reported
problems"
* tag 'usb-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: tcpm: Check for port partner validity before consuming it
usb: typec: tcpm: enforce ready state when queueing alt mode vdm
usb: typec: tcpm: unregister existing source caps before re-registration
usb: typec: tcpm: clear pd_event queue in PORT_RESET
usb: typec: tcpm: queue correct sop type in tcpm_queue_vdm_unlocked
usb: Fix regression caused by invalid ep0 maxpacket in virtual SuperSpeed device
usb: ohci: Prevent missed ohci interrupts
usb: typec: qcom-pmic: fix pdphy start() error handling
usb: typec: qcom-pmic: fix use-after-free on late probe errors
usb: gadget: f_fs: Fix a race condition when processing setup packets.
USB: core: Fix access violation during port device removal
usb: dwc3: core: Prevent phy suspend during init
usb: xhci-plat: Don't include xhci.h
usb: gadget: uvc: use correct buffer size when parsing configfs lists
usb: gadget: composite: fix OS descriptors w_value logic
usb: gadget: f_fs: Fix race between aio_cancel() and AIO request complete
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a new ID for ASUS ROG RAIKIRI controllers added to xpad driver
- amimouse driver structure annotated with __refdata to prevent section
mismatch warnings.
* tag 'input-for-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: amimouse - mark driver struct with __refdata to prevent section mismatch
Input: xpad - add support for ASUS ROG RAIKIRI
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fix from Masami Hiramatsu:
- probe-events: Fix memory leak in parsing probe argument.
There is a memory leak (forget to free an allocated buffer) in a
memory allocation failure path. Fix it to jump to the correct error
handling code.
* tag 'probes-fixes-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/probes: Fix memory leak in traceprobe_parse_probe_arg_body()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing and tracefs fixes from Steven Rostedt:
- Fix RCU callback of freeing an eventfs_inode.
The freeing of the eventfs_inode from the kref going to zero freed
the contents of the eventfs_inode and then used kfree_rcu() to free
the inode itself. But the contents should also be protected by RCU.
Switch to a call_rcu() that calls a function to free all of the
eventfs_inode after the RCU synchronization.
- The tracing subsystem maps its own descriptor to a file represented
by eventfs. The freeing of this descriptor needs to know when the
last reference of an eventfs_inode is released, but currently there
is no interface for that.
Add a "release" callback to the eventfs_inode entry array that allows
for freeing of data that can be referenced by the eventfs_inode being
opened. Then increment the ref counter for this descriptor when the
eventfs_inode file is created, and decrement/free it when the last
reference to the eventfs_inode is released and the file is removed.
This prevents races between freeing the descriptor and the opening of
the eventfs file.
- Fix the permission processing of eventfs.
The change to make the permissions of eventfs default to the mount
point but keep track of when changes were made had a side effect that
could cause security concerns. When the tracefs is remounted with a
given gid or uid, all the files within it should inherit that gid or
uid. But if the admin had changed the permission of some file within
the tracefs file system, it would not get updated by the remount.
This caused the kselftest of file permissions to fail the second time
it is run. The first time, all changes would look fine, but the
second time, because the changes were "saved", the remount did not
reset them.
Create a link list of all existing tracefs inodes, and clear the
saved flags on them on a remount if the remount changes the
corresponding gid or uid fields.
This also simplifies the code by removing the distinction between the
toplevel eventfs and an instance eventfs. They should both act the
same. They were different because of a misconception due to the
remount not resetting the flags. Now that remount resets all the
files and directories to default to the root node if a uid/gid is
specified, it makes the logic simpler to implement.
* tag 'trace-v6.9-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
eventfs: Have "events" directory get permissions from its parent
eventfs: Do not treat events directory different than other directories
eventfs: Do not differentiate the toplevel events directory
tracefs: Still use mount point as default permissions for instances
tracefs: Reset permissions on remount if permissions are options
eventfs: Free all of the eventfs_inode after RCU
eventfs/tracing: Add callback for release of an eventfs_inode
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fix from Christoph Hellwig:
- fix the combination of restricted pools and dynamic swiotlb
(Will Deacon)
* tag 'dma-mapping-6.9-2024-05-04' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: initialise restricted pool list_head when SWIOTLB_DYNAMIC=y
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A handful of clk driver fixes:
- Avoid a deadlock in the Qualcomm clk driver by making the regulator
which supplies the GDSC optional
- Restore RPM clks on Qualcomm msm8976 by setting num_clks
- Fix Allwinner H6 CPU rate changing logic to avoid system crashes by
temporarily reparenting the CPU clk to something that isn't being
changed
- Set a MIPI PLL min/max rate on Allwinner A64 to fix blank screens
on some devices
- Revert back to of_match_device() in the Samsung clkout driver to
get the match data based on the parent device's compatible string"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: samsung: Revert "clk: Use device_get_match_data()"
clk: sunxi-ng: a64: Set minimum and maximum rate for PLL-MIPI
clk: sunxi-ng: common: Support minimum and maximum rate
clk: sunxi-ng: h6: Reparent CPUX during PLL CPUX rate change
clk: qcom: smd-rpm: Restore msm8976 num_clk
clk: qcom: gdsc: treat optional supplies as optional
|
|
The events directory gets its permissions from the root inode. But this
can cause an inconsistency if the instances directory changes its
permissions, as the permissions of the created directories under it should
inherit the permissions of the instances directory when directories under
it are created.
Currently the behavior is:
# cd /sys/kernel/tracing
# chgrp 1002 instances
# mkdir instances/foo
# ls -l instances/foo
[..]
-r--r----- 1 root lkp 0 May 1 18:55 buffer_total_size_kb
-rw-r----- 1 root lkp 0 May 1 18:55 current_tracer
-rw-r----- 1 root lkp 0 May 1 18:55 error_log
drwxr-xr-x 1 root root 0 May 1 18:55 events
--w------- 1 root lkp 0 May 1 18:55 free_buffer
drwxr-x--- 2 root lkp 0 May 1 18:55 options
drwxr-x--- 10 root lkp 0 May 1 18:55 per_cpu
-rw-r----- 1 root lkp 0 May 1 18:55 set_event
All the files and directories under "foo" has the "lkp" group except the
"events" directory. That's because its getting its default value from the
mount point instead of its parent.
Have the "events" directory make its default value based on its parent's
permissions. That now gives:
# ls -l instances/foo
[..]
-rw-r----- 1 root lkp 0 May 1 21:16 buffer_subbuf_size_kb
-r--r----- 1 root lkp 0 May 1 21:16 buffer_total_size_kb
-rw-r----- 1 root lkp 0 May 1 21:16 current_tracer
-rw-r----- 1 root lkp 0 May 1 21:16 error_log
drwxr-xr-x 1 root lkp 0 May 1 21:16 events
--w------- 1 root lkp 0 May 1 21:16 free_buffer
drwxr-x--- 2 root lkp 0 May 1 21:16 options
drwxr-x--- 10 root lkp 0 May 1 21:16 per_cpu
-rw-r----- 1 root lkp 0 May 1 21:16 set_event
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Cc: [email protected]
Cc: Masami Hiramatsu <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Desnoyers <[email protected]>
Cc: Andrew Morton <[email protected]>
Fixes: 8186fff7ab649 ("tracefs/eventfs: Use root and instance inodes as default ownership")
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
Treat the events directory the same as other directories when it comes to
permissions. The events directory was considered different because it's
dentry is persistent, whereas the other directory dentries are created
when accessed. But the way tracefs now does its ownership by using the
root dentry's permissions as the default permissions, the events directory
can get out of sync when a remount is performed setting the group and user
permissions.
Remove the special case for the events directory on setting the
attributes. This allows the updates caused by remount to work properly as
well as simplifies the code.
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Cc: [email protected]
Cc: Masami Hiramatsu <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Desnoyers <[email protected]>
Cc: Andrew Morton <[email protected]>
Fixes: 8186fff7ab649 ("tracefs/eventfs: Use root and instance inodes as default ownership")
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
The toplevel events directory is really no different than the events
directory of instances. Having the two be different caused
inconsistencies and made it harder to fix the permissions bugs.
Make all events directories act the same.
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Cc: [email protected]
Cc: Masami Hiramatsu <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Desnoyers <[email protected]>
Cc: Andrew Morton <[email protected]>
Fixes: 8186fff7ab649 ("tracefs/eventfs: Use root and instance inodes as default ownership")
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
If the instances directory's permissions were never change, then have it
and its children use the mount point permissions as the default.
Currently, the permissions of instance directories are determined by the
instance directory's permissions itself. But if the tracefs file system is
remounted and changes the permissions, the instance directory and its
children should use the new permission.
But because both the instance directory and its children use the instance
directory's inode for permissions, it misses the update.
To demonstrate this:
# cd /sys/kernel/tracing/
# mkdir instances/foo
# ls -ld instances/foo
drwxr-x--- 5 root root 0 May 1 19:07 instances/foo
# ls -ld instances
drwxr-x--- 3 root root 0 May 1 18:57 instances
# ls -ld current_tracer
-rw-r----- 1 root root 0 May 1 18:57 current_tracer
# mount -o remount,gid=1002 .
# ls -ld instances
drwxr-x--- 3 root root 0 May 1 18:57 instances
# ls -ld instances/foo/
drwxr-x--- 5 root root 0 May 1 19:07 instances/foo/
# ls -ld current_tracer
-rw-r----- 1 root lkp 0 May 1 18:57 current_tracer
Notice that changing the group id to that of "lkp" did not affect the
instances directory nor its children. It should have been:
# ls -ld current_tracer
-rw-r----- 1 root root 0 May 1 19:19 current_tracer
# ls -ld instances/foo/
drwxr-x--- 5 root root 0 May 1 19:25 instances/foo/
# ls -ld instances
drwxr-x--- 3 root root 0 May 1 19:19 instances
# mount -o remount,gid=1002 .
# ls -ld current_tracer
-rw-r----- 1 root lkp 0 May 1 19:19 current_tracer
# ls -ld instances
drwxr-x--- 3 root lkp 0 May 1 19:19 instances
# ls -ld instances/foo/
drwxr-x--- 5 root lkp 0 May 1 19:25 instances/foo/
Where all files were updated by the remount gid update.
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Cc: [email protected]
Cc: Masami Hiramatsu <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Desnoyers <[email protected]>
Cc: Andrew Morton <[email protected]>
Fixes: 8186fff7ab649 ("tracefs/eventfs: Use root and instance inodes as default ownership")
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
There's an inconsistency with the way permissions are handled in tracefs.
Because the permissions are generated when accessed, they default to the
root inode's permission if they were never set by the user. If the user
sets the permissions, then a flag is set and the permissions are saved via
the inode (for tracefs files) or an internal attribute field (for
eventfs).
But if a remount happens that specify the permissions, all the files that
were not changed by the user gets updated, but the ones that were are not.
If the user were to remount the file system with a given permission, then
all files and directories within that file system should be updated.
This can cause security issues if a file's permission was updated but the
admin forgot about it. They could incorrectly think that remounting with
permissions set would update all files, but miss some.
For example:
# cd /sys/kernel/tracing
# chgrp 1002 current_tracer
# ls -l
[..]
-rw-r----- 1 root root 0 May 1 21:25 buffer_size_kb
-rw-r----- 1 root root 0 May 1 21:25 buffer_subbuf_size_kb
-r--r----- 1 root root 0 May 1 21:25 buffer_total_size_kb
-rw-r----- 1 root lkp 0 May 1 21:25 current_tracer
-rw-r----- 1 root root 0 May 1 21:25 dynamic_events
-r--r----- 1 root root 0 May 1 21:25 dyn_ftrace_total_info
-r--r----- 1 root root 0 May 1 21:25 enabled_functions
Where current_tracer now has group "lkp".
# mount -o remount,gid=1001 .
# ls -l
-rw-r----- 1 root tracing 0 May 1 21:25 buffer_size_kb
-rw-r----- 1 root tracing 0 May 1 21:25 buffer_subbuf_size_kb
-r--r----- 1 root tracing 0 May 1 21:25 buffer_total_size_kb
-rw-r----- 1 root lkp 0 May 1 21:25 current_tracer
-rw-r----- 1 root tracing 0 May 1 21:25 dynamic_events
-r--r----- 1 root tracing 0 May 1 21:25 dyn_ftrace_total_info
-r--r----- 1 root tracing 0 May 1 21:25 enabled_functions
Everything changed but the "current_tracer".
Add a new link list that keeps track of all the tracefs_inodes which has
the permission flags that tell if the file/dir should use the root inode's
permission or not. Then on remount, clear all the flags so that the
default behavior of using the root inode's permission is done for all
files and directories.
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Cc: [email protected]
Cc: Masami Hiramatsu <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Desnoyers <[email protected]>
Cc: Andrew Morton <[email protected]>
Fixes: 8186fff7ab649 ("tracefs/eventfs: Use root and instance inodes as default ownership")
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
The freeing of eventfs_inode via a kfree_rcu() callback. But the content
of the eventfs_inode was being freed after the last kref. This is
dangerous, as changes are being made that can access the content of an
eventfs_inode from an RCU loop.
Instead of using kfree_rcu() use call_rcu() that calls a function to do
all the freeing of the eventfs_inode after a RCU grace period has expired.
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Cc: [email protected]
Cc: Masami Hiramatsu <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Desnoyers <[email protected]>
Cc: Andrew Morton <[email protected]>
Fixes: 43aa6f97c2d03 ("eventfs: Get rid of dentry pointers without refcounts")
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
Synthetic events create and destroy tracefs files when they are created
and removed. The tracing subsystem has its own file descriptor
representing the state of the events attached to the tracefs files.
There's a race between the eventfs files and this file descriptor of the
tracing system where the following can cause an issue:
With two scripts 'A' and 'B' doing:
Script 'A':
echo "hello int aaa" > /sys/kernel/tracing/synthetic_events
while :
do
echo 0 > /sys/kernel/tracing/events/synthetic/hello/enable
done
Script 'B':
echo > /sys/kernel/tracing/synthetic_events
Script 'A' creates a synthetic event "hello" and then just writes zero
into its enable file.
Script 'B' removes all synthetic events (including the newly created
"hello" event).
What happens is that the opening of the "enable" file has:
{
struct trace_event_file *file = inode->i_private;
int ret;
ret = tracing_check_open_get_tr(file->tr);
[..]
But deleting the events frees the "file" descriptor, and a "use after
free" happens with the dereference at "file->tr".
The file descriptor does have a reference counter, but there needs to be a
way to decrement it from the eventfs when the eventfs_inode is removed
that represents this file descriptor.
Add an optional "release" callback to the eventfs_entry array structure,
that gets called when the eventfs file is about to be removed. This allows
for the creating on the eventfs file to increment the tracing file
descriptor ref counter. When the eventfs file is deleted, it can call the
release function that will call the put function for the tracing file
descriptor.
This will protect the tracing file from being freed while a eventfs file
that references it is being opened.
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]/
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Cc: [email protected]
Cc: Masami Hiramatsu <[email protected]>
Cc: Mathieu Desnoyers <[email protected]>
Fixes: 5790b1fb3d672 ("eventfs: Remove eventfs_file and just use eventfs_inode")
Reported-by: Tze-nan wu <[email protected]>
Tested-by: Tze-nan Wu (吳澤南) <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fix from Dave Jiang:
"Add missing RCH support for endpoint access_coordinate calculation.
A late bug was reported by Robert Richter that the Restricted CXL Host
(RCH) support was missing in the CXL endpoint access_coordinate
calculation.
The missing support causes the topology iterator to stumble over a
NULL pointer and triggers a kernel OOPS on a platform with CXL 1.1
support.
The fix bypasses RCH topology as the access_coordinate calculation is
not necessary since RCH does not support hotplug and the memory region
exported should be covered by the HMAT table already.
A unit test is also added to cxl_test to check against future
regressions on the topology iterator"
* tag 'cxl-fixes-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl: Fix cxl_endpoint_get_perf_coordinate() support for RCH
|
|
The KVM_CREATE_GUEST_MEMFD ioctl returns a file descriptor, and is
documented as such in the description. However, the "Returns" field
in the documentation states that the ioctl returns 0 on success.
Update this to match the description.
Signed-off-by: Carlos López <[email protected]>
Fixes: a7800aa80ea4 ("KVM: Add KVM_CREATE_GUEST_MEMFD ioctl() for guest-specific backing memory")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Two fixes when running as Xen PV guests for issues introduced in the
6.9 merge window, both related to apic id handling"
* tag 'for-linus-6.9a-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: return a sane initial apic id when running as PV guest
x86/xen/smp_pv: Register the boot CPU APIC properly
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fix from Ard Biesheuvel:
"This works around a shortcoming in the memory acceptation API, which
may apparently hog the CPU for long enough to trigger the softlockup
watchdog.
Note that this only affects confidential VMs running under the Intel
TDX hypervisor, which is why I accepted this for now, but this should
obviously be fixed properly in the future"
* tag 'efi-urgent-for-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/unaccepted: touch soft lockup during memory accept
|
|
Pull block fixes from Jens Axboe:
"Nothing major in here - an nvme pull request with mostly auth/tcp
fixes, and a single fix for ublk not setting segment count and size
limits"
* tag 'block-6.9-20240503' of git://git.kernel.dk/linux:
nvme-tcp: strict pdu pacing to avoid send stalls on TLS
nvmet: fix nvme status code when namespace is disabled
nvmet-tcp: fix possible memory leak when tearing down a controller
nvme: cancel pending I/O if nvme controller is in terminal state
nvmet-auth: replace pr_debug() with pr_err() to report an error.
nvmet-auth: return the error code to the nvmet_auth_host_hash() callers
nvme: find numa distance only if controller has valid numa id
ublk: remove segment count and size limits
nvme: fix warn output about shared namespaces without CONFIG_NVME_MULTIPATH
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"As usual in a late stage, we received a fair amount of fixes for ASoC,
and it became bigger than wished. But all fixes are rather device-
specific, and they look pretty safe to apply.
A major par of changes are series of fixes for ASoC meson and SOF
drivers as well as for Realtek and Cirrus codecs. In addition, recent
emu10k1 regression fixes and usual HD-audio quirks are included"
* tag 'sound-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (46 commits)
ALSA: hda/realtek: Fix build error without CONFIG_PM
ALSA: hda/realtek: Fix conflicting PCI SSID 17aa:386f for Lenovo Legion models
ALSA: hda/realtek - Set GPIO3 to default at S4 state for Thinkpad with ALC1318
ALSA: hda: intel-sdw-acpi: fix usage of device_get_named_child_node()
ALSA: hda: intel-dsp-config: harden I2C/I2S codec detection
ASoC: cs35l56: fix usages of device_get_named_child_node()
ASoC: da7219-aad: fix usage of device_get_named_child_node()
ASoC: meson: cards: select SND_DYNAMIC_MINORS
ASoC: meson: axg-tdm: add continuous clock support
ASoC: meson: axg-tdm-interface: manage formatters in trigger
ASoC: meson: axg-card: make links nonatomic
ASoC: meson: axg-fifo: use threaded irq to check periods
ALSA: hda/realtek: Fix mute led of HP Laptop 15-da3001TU
ALSA: emu10k1: make E-MU FPGA writes potentially more reliable
ALSA: emu10k1: fix E-MU dock initialization
ALSA: emu10k1: use mutex for E-MU FPGA access locking
ALSA: emu10k1: move the whole GPIO event handling to the workqueue
ALSA: emu10k1: factor out snd_emu1010_load_dock_firmware()
ALSA: emu10k1: fix E-MU card dock presence monitoring
ASoC: rt715-sdca: volume step modification
...
|
|
Pull drm fixes from Dave Airlie:
"Weekly fixes, mostly made up from amdgpu and some panel changes.
Otherwise xe, nouveau, vmwgfx and a couple of others, all seems pretty
on track.
amdgpu:
- Fix VRAM memory accounting
- DCN 3.1 fixes
- DCN 2.0 fix
- DCN 3.1.5 fix
- DCN 3.5 fix
- DCN 3.2.1 fix
- DP fixes
- Seamless boot fix
- Fix call order in amdgpu_ttm_move()
- Fix doorbell regression
- Disable panel replay temporarily
amdkfd:
- Flush wq before creating kfd process
xe:
- Fix UAF on rebind worker
- Fix ADL-N display integration
imagination:
- fix page-count macro
nouveau:
- avoid page-table allocation failures
- fix firmware memory allocation
panel:
- ili9341: avoid OF for device properties; respect deferred probe;
fix usage of errno codes
ttm:
- fix status output
vmwgfx:
- fix legacy display unit
- fix read length in fence signalling"
* tag 'drm-fixes-2024-05-03' of https://gitlab.freedesktop.org/drm/kernel: (25 commits)
drm/xe/display: Fix ADL-N detection
drm/panel: ili9341: Use predefined error codes
drm/panel: ili9341: Respect deferred probe
drm/panel: ili9341: Correct use of device property APIs
drm/xe/vm: prevent UAF in rebind_work_func()
drm/amd/display: Disable panel replay by default for now
drm/amdgpu: fix doorbell regression
drm/amdkfd: Flush the process wq before creating a kfd_process
drm/amd/display: Disable seamless boot on 128b/132b encoding
drm/amd/display: Fix DC mode screen flickering on DCN321
drm/amd/display: Add VCO speed parameter for DCN31 FPU
drm/amdgpu: once more fix the call oder in amdgpu_ttm_move() v2
drm/amd/display: Allocate zero bw after bw alloc enable
drm/amd/display: Fix incorrect DSC instance for MST
drm/amd/display: Atom Integrated System Info v2_2 for DCN35
drm/amd/display: Add dtbclk access to dcn315
drm/amd/display: Ensure that dmcub support flag is set for DCN20
drm/amd/display: Handle Y carry-over in VCP X.Y calculation
drm/amdgpu: Fix VRAM memory accounting
drm/vmwgfx: Fix invalid reads in fence signaled events
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few small fixes for v6.9,
The core fix is for issues with reuse of a spi_message in the case
where we've got queued messages (a relatively rare occurrence with
modern code so it wasn't noticed in testing).
We also avoid an issue with the Kunpeng driver by simply removing the
debug interface that could trigger it, and address issues with
confusing and corrupted output when printing the IP version of the AXI
SPI engine"
* tag 'spi-fix-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: fix null pointer dereference within spi_sync
spi: hisi-kunpeng: Delete the dump interface of data registers in debugfs
spi: axi-spi-engine: fix version format string
|
|
* kvm-arm64/pkvm-6.10: (25 commits)
: .
: At last, a bunch of pKVM patches, courtesy of Fuad Tabba.
: From the cover letter:
:
: "This series is a bit of a bombay-mix of patches we've been
: carrying. There's no one overarching theme, but they do improve
: the code by fixing existing bugs in pKVM, refactoring code to
: make it more readable and easier to re-use for pKVM, or adding
: functionality to the existing pKVM code upstream."
: .
KVM: arm64: Force injection of a data abort on NISV MMIO exit
KVM: arm64: Restrict supported capabilities for protected VMs
KVM: arm64: Refactor setting the return value in kvm_vm_ioctl_enable_cap()
KVM: arm64: Document the KVM/arm64-specific calls in hypercalls.rst
KVM: arm64: Rename firmware pseudo-register documentation file
KVM: arm64: Reformat/beautify PTP hypercall documentation
KVM: arm64: Clarify rationale for ZCR_EL1 value restored on guest exit
KVM: arm64: Introduce and use predicates that check for protected VMs
KVM: arm64: Add is_pkvm_initialized() helper
KVM: arm64: Simplify vgic-v3 hypercalls
KVM: arm64: Move setting the page as dirty out of the critical section
KVM: arm64: Change kvm_handle_mmio_return() return polarity
KVM: arm64: Fix comment for __pkvm_vcpu_init_traps()
KVM: arm64: Prevent kmemleak from accessing .hyp.data
KVM: arm64: Do not map the host fpsimd state to hyp in pKVM
KVM: arm64: Rename __tlb_switch_to_{guest,host}() in VHE
KVM: arm64: Support TLB invalidation in guest context
KVM: arm64: Avoid BBM when changing only s/w bits in Stage-2 PTE
KVM: arm64: Check for PTE validity when checking for executable/cacheable
KVM: arm64: Avoid BUG-ing from the host abort path
...
Signed-off-by: Marc Zyngier <[email protected]>
|
|
* kvm-arm64/lpi-xa-cache:
: .
: New and improved LPI translation cache from Oliver Upton.
:
: From the cover letter:
:
: "As discussed [*], here is the new take on the LPI translation cache,
: migrating to an xarray indexed by (devid, eventid) per ITS.
:
: The end result is quite satisfying, as it becomes possible to rip out
: other nasties such as the lpi_list_lock. To that end, patches 2-6 aren't
: _directly_ related to the translation cache cleanup, but instead are
: done to enable the cleanups at the end of the series.
:
: I changed out my test machine from the last time so the baseline has
: moved a bit, but here are the results from the vgic_lpi_stress test:
:
: +----------------------------+------------+-------------------+
: | Configuration | v6.8-rc1 | v6.8-rc1 + series |
: +----------------------------+------------+-------------------+
: | -v 1 -d 1 -e 1 -i 1000000 | 2063296.81 | 1362602.35 |
: | -v 16 -d 16 -e 16 -i 10000 | 610678.33 | 5200910.01 |
: | -v 16 -d 16 -e 17 -i 10000 | 678361.53 | 5890675.51 |
: | -v 32 -d 32 -e 1 -i 100000 | 580918.96 | 8304552.67 |
: | -v 1 -d 1 -e 17 -i 1000 | 1512443.94 | 1425953.8 |
: +----------------------------+------------+-------------------+
:
: Unlike last time, no dramatic regressions at any performance point. The
: regression on a single interrupt stream is to be expected, as the
: overheads of SRCU and two tree traversals (kvm_io_bus_get_dev(),
: translation cache xarray) are likely greater than that of a linked-list
: with a single node."
: .
KVM: selftests: Add stress test for LPI injection
KVM: selftests: Use MPIDR_HWID_BITMASK from cputype.h
KVM: selftests: Add helper for enabling LPIs on a redistributor
KVM: selftests: Add a minimal library for interacting with an ITS
KVM: selftests: Add quadword MMIO accessors
KVM: selftests: Standardise layout of GIC frames
KVM: selftests: Align with kernel's GIC definitions
KVM: arm64: vgic-its: Get rid of the lpi_list_lock
KVM: arm64: vgic-its: Rip out the global translation cache
KVM: arm64: vgic-its: Use the per-ITS translation cache for injection
KVM: arm64: vgic-its: Spin off helper for finding ITS by doorbell addr
KVM: arm64: vgic-its: Maintain a translation cache per ITS
KVM: arm64: vgic-its: Scope translation cache invalidations to an ITS
KVM: arm64: vgic-its: Get rid of vgic_copy_lpi_list()
KVM: arm64: vgic-debug: Use an xarray mark for debug iterator
KVM: arm64: vgic-its: Walk LPI xarray in vgic_its_cmd_handle_movall()
KVM: arm64: vgic-its: Walk LPI xarray in vgic_its_invall()
KVM: arm64: vgic-its: Walk LPI xarray in its_sync_lpi_pending_table()
KVM: Treat the device list as an rculist
Signed-off-by: Marc Zyngier <[email protected]>
|
|
* kvm-arm64/nv-eret-pauth:
: .
: Add NV support for the ERETAA/ERETAB instructions. From the cover letter:
:
: "Although the current upstream NV support has *some* support for
: correctly emulating ERET, that support is only partial as it doesn't
: support the ERETAA and ERETAB variants.
:
: Supporting these instructions was cast aside for a long time as it
: involves implementing some form of PAuth emulation, something I wasn't
: overly keen on. But I have reached a point where enough of the
: infrastructure is there that it actually makes sense. So here it is!"
: .
KVM: arm64: nv: Work around lack of pauth support in old toolchains
KVM: arm64: Drop trapping of PAuth instructions/keys
KVM: arm64: nv: Advertise support for PAuth
KVM: arm64: nv: Handle ERETA[AB] instructions
KVM: arm64: nv: Add emulation for ERETAx instructions
KVM: arm64: nv: Add kvm_has_pauth() helper
KVM: arm64: nv: Reinject PAC exceptions caused by HCR_EL2.API==0
KVM: arm64: nv: Handle HCR_EL2.{API,APK} independently
KVM: arm64: nv: Honor HFGITR_EL2.ERET being set
KVM: arm64: nv: Fast-track 'InHost' exception returns
KVM: arm64: nv: Add trap forwarding for ERET and SMC
KVM: arm64: nv: Configure HCR_EL2 for FEAT_NV2
KVM: arm64: nv: Drop VCPU_HYP_CONTEXT flag
KVM: arm64: Constraint PAuth support to consistent implementations
KVM: arm64: Add helpers for ESR_ELx_ERET_ISS_ERET*
KVM: arm64: Harden __ctxt_sys_reg() against out-of-range values
Signed-off-by: Marc Zyngier <[email protected]>
|
|
* kvm-arm64/host_data:
: .
: Rationalise the host-specific data to live as part of the per-CPU state.
:
: From the cover letter:
:
: "It appears that over the years, we have accumulated a lot of cruft in
: the kvm_vcpu_arch structure. Part of the gunk is data that is strictly
: host CPU specific, and this result in two main problems:
:
: - the structure itself is stupidly large, over 8kB. With the
: arch-agnostic kvm_vcpu, we're above 10kB, which is insane. This has
: some ripple effects, as we need physically contiguous allocation to
: be able to map it at EL2 for !VHE. There is more to it though, as
: some data structures, although per-vcpu, could be allocated
: separately.
:
: - We lose track of the life-cycle of this data, because we're
: guaranteed that it will be around forever and we start relying on
: wrong assumptions. This is becoming a maintenance burden.
:
: This series rectifies some of these things, starting with the two main
: offenders: debug and FP, a lot of which gets pushed out to the per-CPU
: host structure. Indeed, their lifetime really isn't that of the vcpu,
: but tied to the physical CPU the vpcu runs on.
:
: This results in a small reduction of the vcpu size, but mainly a much
: clearer understanding of the life-cycle of these structures."
: .
KVM: arm64: Move management of __hyp_running_vcpu to load/put on VHE
KVM: arm64: Exclude FP ownership from kvm_vcpu_arch
KVM: arm64: Exclude host_fpsimd_state pointer from kvm_vcpu_arch
KVM: arm64: Exclude mdcr_el2_host from kvm_vcpu_arch
KVM: arm64: Exclude host_debug_data from vcpu_arch
KVM: arm64: Add accessor for per-CPU state
Signed-off-by: Marc Zyngier <[email protected]>
|
|
The per-CPU host context structure contains a __hyp_running_vcpu that
serves as a replacement for kvm_get_current_vcpu() in contexts where
we cannot make direct use of it (such as in the nVHE hypervisor).
Since there is a lot of common code between nVHE and VHE, the latter
also populates this field even if kvm_get_running_vcpu() always works.
We currently pretty inconsistent when populating __hyp_running_vcpu
to point to the currently running vcpu:
- on {n,h}VHE, we set __hyp_running_vcpu on entry to __kvm_vcpu_run
and clear it on exit.
- on VHE, we set __hyp_running_vcpu on entry to __kvm_vcpu_run_vhe
and never clear it, effectively leaving a dangling pointer...
VHE is obviously the odd one here. Although we could make it behave
just like nVHE, this wouldn't match the behaviour of KVM with VHE,
where the load phase is where most of the context-switch gets done.
So move all the __hyp_running_vcpu management to the VHE-specific
load/put phases, giving us a bit more sanity and matching the
behaviour of kvm_get_running_vcpu().
Reviewed-by: Oliver Upton <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Marc Zyngier <[email protected]>
|
|
Linux 6.9 has introduced new bitmap manipulation helpers, with
bitmap_gather() being of special interest, as it does exactly
what kvm_mpidr_index() is already doing.
Make the latter a wrapper around the former.
Reviewed-by: Oliver Upton <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Marc Zyngier <[email protected]>
|
|
Private interrupts are currently part of the CPU interface structure
that is part of each and every vcpu we create.
Currently, we have 32 of them per vcpu, resulting in a per-vcpu array
that is just shy of 4kB. On its own, that's no big deal, but it gets
in the way of other things:
- each vcpu gets mapped at EL2 on nVHE/hVHE configurations. This
requires memory that is physically contiguous. However, the EL2
code has no purpose looking at the interrupt structures and
could do without them being mapped.
- supporting features such as EPPIs, which extend the number of
private interrupts past the 32 limit would make the array
even larger, even for VMs that do not use the EPPI feature.
Address these issues by moving the private interrupt array outside
of the vcpu, and replace it with a simple pointer. We take this
opportunity to make it obvious what gets initialised when, as
that path was remarkably opaque, and tighten the locking.
Reviewed-by: Oliver Upton <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Marc Zyngier <[email protected]>
|