| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
We have a fair number of patches, but many of them are from the
first bullet here:
* EAPoL-over-nl80211 from Denis - this will let us fix
some long-standing issues with bridging, races with
encryption and more
* DFS offload support from the qtnfmac folks
* regulatory database changes for the new ETSI adaptivity
requirements
* various other fixes and small enhancements
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Andrew Lunn says:
====================
Add ATU/VTU statistics
Previous patches have added basic support for Address Translation Unit
and VLAN translation Unit violation interrupts. Add statistics
counters for when these occur, which can be accessed using
ethtool. Downgrade one of the particularly spammy warnings from VTU
violations to debug only, now that we have a counter for it.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
VTU miss violations can happen under normal conditions. Don't spam the
kernel log, downgrade the output to debug level only. The statistics
counter will indicate it is happening, if anybody not debugging is
interested.
Signed-off-by: Andrew Lunn <[email protected]>
Reported-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Count the numbers of various ATU and VTU violation statistics and
return them as part of the ethtool -S statistics.
Signed-off-by: Andrew Lunn <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The proc file cleanup left a label possibly unused:
net/sctp/protocol.c: In function 'sctp_defaults_init':
net/sctp/protocol.c:1304:1: error: label 'err_init_proc' defined but not used [-Werror=unused-label]
This adds an #ifdef around it to match the respective 'goto'.
Fixes: d47d08c8ca05 ("sctp: use proc_remove_subtree()")
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Neil Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Use the module_pci_driver() macro to make the code simpler
by eliminating module_init and module_exit calls.
Signed-off-by: Wei Yongjun <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Fixes the following sparse warning:
drivers/net/ethernet/broadcom/genet/bcmgenet.c:1351:16: warning:
Using plain integer as NULL pointer
Signed-off-by: Wei Yongjun <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The skb_segment() function returns error pointers on error. It never
returns NULL.
Fixes: 76db8087c4c9 ("net: bpf: add a test for skb_segment in test_bpf module")
Signed-off-by: Dan Carpenter <[email protected]>
Acked-by: Daniel Borkmann <[email protected]>
Reviewed-by: Yonghong Song <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Cotsworks modules fail the checksums - it appears that Cotsworks
reprograms the EEPROM at the end of production with the final product
information (serial, date code, and exact part number for module
options) and fails to update the checksum.
Work around this by detecting the Cotsworks name in the manufacturer
field, and reducing the checksum failures to warnings rather than a
hard error.
Signed-off-by: Russell King <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Sudarsana Reddy Kalluru says:
====================
qed*: Flash upgrade support.
The patch series adds adapter flash upgrade support for qed/qede drivers.
Please consider applying it to net-next branch.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
The patch adds ethtool callback implementation for flash update.
Signed-off-by: Sudarsana Reddy Kalluru <[email protected]>
Signed-off-by: Ariel Elior <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This patch adds the required driver support for updating the flash or
non volatile memory of the adapter. At highlevel, flash upgrade comprises
of reading the flash images from the input file, validating the images and
writing them to the respective paritions.
Signed-off-by: Sudarsana Reddy Kalluru <[email protected]>
Signed-off-by: Ariel Elior <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This patch adds APIs for flash access.
Signed-off-by: Sudarsana Reddy Kalluru <[email protected]>
Signed-off-by: Ariel Elior <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Signed-off-by: Sudarsana Reddy Kalluru <[email protected]>
Signed-off-by: Ariel Elior <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This patch adds support for populating the flash image attributes.
Signed-off-by: Sudarsana Reddy Kalluru <[email protected]>
Signed-off-by: Ariel Elior <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This FW contains several fixes and features
RDMA Features
- SRQ support
- XRC support
- Memory window support
- RDMA low latency queue support
- RDMA bonding support
RDMA bug fixes
- RDMA remote invalidate during retransmit fix
- iWARP MPA connect interop issue with RTR fix
- iWARP Legacy DPM support
- Fix MPA reject flow
- iWARP error handling
- RQ WQE validation checks
MISC
- Fix some HSI types endianity
- New Restriction: vlan insertion in core_tx_bd_data can't be set
for LB packets
ETH
- HW QoS offload support
- Fix vlan, dcb and sriov flow of VF sending a packet with
inband VLAN tag instead of default VLAN
- Allow GRE version 1 offloads in RX flow
- Allow VXLAN steering
iSCSI / FcoE
- Fix bd availability checking flow
- Support 256th sge proerly in iscsi/fcoe retransmit
- Performance improvement
- Fix handle iSCSI command arrival with AHS and with immediate
- Fix ipv6 traffic class configuration
DEBUG
- Update debug utilities
Signed-off-by: Michal Kalderon <[email protected]>
Signed-off-by: Tomer Tayar <[email protected]>
Signed-off-by: Manish Rangankar <[email protected]>
Signed-off-by: Ariel Elior <[email protected]>
Acked-by: Jason Gunthorpe <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
IPv4 was changed in commit 52a773d645e9 ("net: Export ip fragment
sysctl to unprivileged users")
The only sysctl that is not per-netns is not used :
ip6frag_secret_interval
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Nikolay Borisov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
During heavy tx traffic, control messages (sent by liquidio driver to NIC
firmware) sometimes do not get processed in a timely manner. Reason is:
the low-level metadata of control messages and that of egress network
packets indicate that they have the same priority.
Fix it by setting a higher priority for control messages through the new
ctrl_qpg field in the oct_txpciq struct. It is the NIC firmware that does
the actual setting of priority by writing to the new ctrl_qpg field; the
host driver treats that value as opaque and just assigns it to pki_ih3->qpg
Signed-off-by: Intiyaz Basha <[email protected]>
Signed-off-by: Felix Manlunas <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
David Ahern says:
====================
net: Allow FIB notifiers to fail add and replace
I wanted to revisit how resource overload is handled for hardware offload
of FIB entries and rules. At the moment, the in-kernel fib notifier can
tell a driver about a route or rule add, replace, and delete, but the
notifier can not affect the action. Specifically, in the case of mlxsw
if a route or rule add is going to overflow the ASIC resources the only
recourse is to abort hardware offload. Aborting offload is akin to taking
down the switch as the path from data plane to the control plane simply
can not support the traffic bandwidth of the front panel ports. Further,
the current state of FIB notifiers is inconsistent with other resources
where a driver can affect a user request - e.g., enslavement of a port
into a bridge or a VRF.
As a result of the work done over the past 3+ years, I believe we are
at a point where we can bring consistency to the stack and offloads,
and reliably allow the FIB notifiers to fail a request, pushing an error
along with a suitable error message back to the user. Rather than
aborting offload when the switch is out of resources, userspace is simply
prevented from adding more routes and has a clear indication of why.
This set does not resolve the corner case where rules or routes not
supported by the device are installed prior to the driver getting loaded
and registering for FIB notifications. In that case, hardware offload has
not been established and it can refuse to offload anything, sending
errors back to userspace via extack. Since conceptually the driver owns
the netdevices associated with its asic, this corner case mainly applies
to unsupported rules and any races during the bringup phase.
Patch 1 fixes call_fib_notifiers to extract the errno from the encoded
response from handlers.
Patches 2-5 allow the call to call_fib_notifiers to fail the add or
replace of a route or rule.
Patch 6 adds a simple resource controller to netdevsim to illustrate
how a FIB resource controller can limit the number of route entries.
Changes since RFC
- correct return code for call_fib_notifier
- dropped patch 6 exporting devlink symbols
- limited example resource controller to init_net only
- updated Kconfig for netdevsim to use MAY_USE_DEVLINK
- updated cover letter regarding startup case noted by Ido
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Add devlink support to netdevsim and use it to implement a simple,
profile based resource controller. Only one controller is needed
per namespace, so the first netdevsim netdevice in a namespace
registers with devlink. If that device is deleted, the resource
settings are deleted.
The resource controller allows a user to limit the number of IPv4 and
IPv6 FIB entries and FIB rules. The resource paths are:
/IPv4
/IPv4/fib
/IPv4/fib-rules
/IPv6
/IPv6/fib
/IPv6/fib-rules
The IPv4 and IPv6 top level resources are unlimited in size and can not
be changed. From there, the number of FIB entries and FIB rule entries
are unlimited by default. A user can specify a limit for the fib and
fib-rules resources:
$ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96
$ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16
$ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64
$ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16
$ devlink dev reload netdevsim/netdevsim0
such that the number of rules or routes is limited (96 ipv4 routes in the
example above):
$ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done
Error: netdevsim: Exceeded number of supported fib entries.
$ devlink resource show netdevsim/netdevsim0
netdevsim/netdevsim0:
name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non
resources:
name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables
...
With this template in place for resource management, it is fairly trivial
to extend and shows one way to implement a simple counter based resource
controller typical of network profiles.
Currently, devlink only supports initial namespace. Code is in place to
adapt netdevsim to a per namespace controller once the network namespace
issues are resolved.
Signed-off-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Move call to call_fib6_entry_notifiers for new IPv6 routes to right
before the insertion into the FIB. At this point notifier handlers can
decide the fate of the new route with a clean path to delete the
potential new entry if the notifier returns non-0.
Signed-off-by: David Ahern <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add checking to call to call_fib_entry_notifiers for IPv4 route replace.
Allows a notifier handler to fail the replace.
Signed-off-by: David Ahern <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Move call to call_fib_entry_notifiers for new IPv4 routes to right
before the call to fib_insert_alias. At this point the only remaining
failure path is memory allocations in fib_insert_node. Handle that
very unlikely failure with a call to call_fib_entry_notifiers to
tell drivers about it.
At this point notifier handlers can decide the fate of the new route
with a clean path to delete the potential new entry if the notifier
returns non-0.
Signed-off-by: David Ahern <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Move call_fib_rule_notifiers up in fib_nl_newrule to the point right
before the rule is inserted into the list. At this point there are no
more failure paths within the core rule code, so if the notifier
does not fail then the rule will be inserted into the list.
Signed-off-by: David Ahern <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Notifier handlers use notifier_from_errno to convert any potential error
to an encoded format. As a consequence the other side, call_fib_notifier{s}
in this case, needs to use notifier_to_errno to return the error from
the handler back to its caller.
Signed-off-by: David Ahern <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2018-03-27 (Misc updates & SQ recovery)
This series contains Misc updates and cleanups for mlx5e rx path
and SQ recovery feature for tx path.
From Tariq: (RX updates)
- Disable Striding RQ when PCI devices, striding RQ limits the use
of CQE compression feature, which is very critical for slow PCI
devices performance, in this change we will prefer CQE compression
over Striding RQ only on specific "slow" PCIe links.
- RX path cleanups
- Private flag to enable/disable striding RQ
From Eran: (TX fast recovery)
- TX timeout logic improvements, fast SQ recovery and TX error reporting
if a HW error occurs while transmitting on a specific SQ, the driver will
ignore such error and will wait for TX timeout to occur and reset all
the rings. Instead, the current series improves the resiliency for such
HW errors by detecting TX completions with errors, which will report them
and perform a fast recover for the specific faulty SQ even before a TX
timeout is detected.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Kirill Tkhai says:
====================
Introduce net_rwsem to protect net_namespace_list
The series introduces fine grained rw_semaphore, which will be used
instead of rtnl_lock() to protect net_namespace_list.
This improves scalability and allows to do non-exclusive sleepable
iteration for_each_net(), which is enough for most cases.
scripts/get_maintainer.pl gives enormous list of people, and I add
all to CC.
Note, that this patch is independent of "Close race between
{un, }register_netdevice_notifier and pernet_operations":
https://patchwork.ozlabs.org/project/netdev/list/?series=36495
Signed-off-by: Kirill Tkhai <[email protected]>
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
rtnl_lock() doesn't protect net::ct::count,
and it's not needed for__nf_ct_unconfirmed_destroy()
and for nf_queue_nf_hook_drop().
Signed-off-by: Kirill Tkhai <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Here we iterate for_each_net() and removes
vport from alive net to the exiting net.
ovs_net::dps are protected by ovs_mutex(),
and the others, who change it (ovs_dp_cmd_new(),
__dp_destroy()) also take it.
The same with datapath::ports list.
So, we remove rtnl_lock() here.
Signed-off-by: Kirill Tkhai <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
rt_genid_bump_all() consists of ipv4 and ipv6 part.
ipv4 part is incrementing of net::ipv4::rt_genid,
and I see many places, where it's read without rtnl_lock().
ipv6 part calls __fib6_clean_all(), and it's also
called without rtnl_lock() in other places.
So, rtnl_lock() here was used to iterate net_namespace_list only,
and we can remove it.
Signed-off-by: Kirill Tkhai <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This function iterates over net_namespace_list and flushes
the queue for every of them. What does this rtnl_lock()
protects?! Since we may add skbs to net::wext_nlevents
without rtnl_lock(), it does not protects us about queuers.
It guarantees, two threads can't flush the queue in parallel,
that can change the order, but since skb can be queued
in any order, it doesn't matter, how many threads do this
in parallel. In case of several threads, this will be even
faster.
So, we can remove rtnl_lock() here, as it was used for
iteration over net_namespace_list only.
Signed-off-by: Kirill Tkhai <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
rtnl_lock() is used everywhere, and contention is very high.
When someone wants to iterate over alive net namespaces,
he/she has no a possibility to do that without exclusive lock.
But the exclusive rtnl_lock() in such places is overkill,
and it just increases the contention. Yes, there is already
for_each_net_rcu() in kernel, but it requires rcu_read_lock(),
and this can't be sleepable. Also, sometimes it may be need
really prevent net_namespace_list growth, so for_each_net_rcu()
is not fit there.
This patch introduces new rw_semaphore, which will be used
instead of rtnl_mutex to protect net_namespace_list. It is
sleepable and allows not-exclusive iterations over net
namespaces list. It allows to stop using rtnl_lock()
in several places (what is made in next patches) and makes
less the time, we keep rtnl_mutex. Here we just add new lock,
while the explanation of we can remove rtnl_lock() there are
in next patches.
Fine grained locks generally are better, then one big lock,
so let's do that with net_namespace_list, while the situation
allows that.
Signed-off-by: Kirill Tkhai <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Florian Fainelli says:
====================
net: bgmac: Couple of small bgmac changes
This patch series addresses two minor issues with the bgmac driver:
- provides the interface name through /proc/interrupts rather than "bgmac"
- makes sure the interrupts are masked during probe, in case the block was
not properly reset
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
We can have interrupts left enabled form e.g: the bootloader which used
the network device for network boot. Make sure we have those disabled as
early as possible to avoid spurious interrupts.
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
When the system contains several BGMAC adapters, it is nice to be able
to tell which one is which by looking at /proc/interrupts. Use the
network device name as a name to request_irq() with.
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc: Tracing updates
Here are some patches that update tracing in AF_RXRPC and AFS:
(1) Add a tracepoint for tracking resend events.
(2) Use debug_ids in traces rather than pointers (as pointers are now hashed)
and allow use of the same debug_id in AFS calls as in the corresponding
AF_RXRPC calls. This makes filtering the trace output much easier.
(3) Add a tracepoint for tracking call completion.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Add support for the National Instruments XGE 1/10G network device.
It uses the EEPROM on the board via NVMEM.
Signed-off-by: Moritz Fischer <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This adds bindings for the NI XGE 1G/10G network device.
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Moritz Fischer <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2018-03-29
1) Remove a redundant pointer initialization esp_input_set_header().
From Colin Ian King.
2) Mark the xfrm kmem_caches as __ro_after_init.
From Alexey Dobriyan.
3) Do the checksum for an ipsec offlad packet in software
if the device does not advertise NETIF_F_HW_ESP_TX_CSUM.
From Shannon Nelson.
4) Use booleans for true and false instead of integers
in xfrm_policy_cache_flush().
From Gustavo A. R. Silva
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
In ca8210_test_int_user_write() a user can request the transfer of a
frame with a length field (command.length) that is longer than the
actual buffer provided (len). In this scenario the driver will copy
the buffer contents into the uninitialised command[] buffer, then
transfer <data.length> bytes over the SPI even though only <len> bytes
had been populated, potentially leaking sensitive kernel memory.
Also the first 6 bytes of the command buffer must be initialised in case
a malformed, short packet is written and the uninitialised bytes are
read in ca8210_test_check_upstream.
Reported-by: Domen Puncer Kugler <[email protected]>
Signed-off-by: Harry Morris <[email protected]>
Tested-by: Harry Morris <[email protected]>
Signed-off-by: Stefan Schmidt <[email protected]>
|
|
Apparently, some APs are buggy enough to send a zeroed
WMM IE. Don't WARN on this since this is not caused by a bug
on the client's system.
This aligns the condition of the WARNING in drv_conf_tx
with the validity check in ieee80211_sta_wmm_params.
We will now pick the default values whenever we get
a zeroed WMM IE.
This has been reported here:
https://bugzilla.kernel.org/show_bug.cgi?id=199161
Fixes: f409079bb678 ("mac80211: sanity check CW_min/CW_max towards driver")
Signed-off-by: Emmanuel Grumbach <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
|
|
ath.git patches for 4.17. Major changes:
ath10k
* enable chip temperature measurement for QCA6174/QCA9377
* add firmware memory dump for QCA9984
* enable buffer STA on TDLS link for QCA6174
* support different beacon internals in multiple interface scenario
for QCA988X/QCA99X0/QCA9984/QCA4019
|
|
This is the EAPoL over nl80211 patchset from Denis Kenzior, minus some
infrastructure patches I'd split out and applied earlier. Denis described
it as follows:
This patchset adds support for running 802.11 authentication mechanisms (e.g.
802.1X, 4-Way Handshake, etc) over NL80211 instead of putting them onto the
network device. This has the advantage of fixing several long-standing race
conditions that result from userspace operating on multiple transports in order
to manage a 802.11 connection (e.g. NL80211 and wireless netdev, wlan0, etc).
For example, userspace would sometimes see 4-Way handshake packets before
NL80211 signaled that the connection has been established. Leading to ugly
hacks or having the STA wait for retransmissions from the AP.
This also provides a way to mitigate a particularly nasty race condition where
the encryption key could be set prior to the 4-way handshake packet 4/4 being
sent. This would result in the packet being sent encrypted and discarded by
the peer. The mitigation strategy for this race is for userspace to explicitly
tell the kernel that a particular EAPoL packet should not be encrypted.
To make this possible this patchset introduces a new NL80211 command and several
new attributes. A userspace that is capable of processing EAPoL packets over
NL80211 includes a new NL80211_ATTR_CONTROL_PORT_OVER_NL80211 attribute in its
NL80211_CMD_ASSOCIATE or NL80211_CMD_CONNECT requests being sent to the kernel.
The previously added NL80211_ATTR_SOCKET_OWNER attribute must also be included.
The latter is used by the kernel to send NL80211_CMD_CONTROL_PORT_FRAME
notifications back to userspace via a netlink unicast. If the
NL80211_ATTR_CONTROL_PORT_OVER_NL80211 attribute is not specified, then legacy
behavior is kept and control port packets continue to flow over the network
interface.
If control port over nl80211 transport is requested, then control port packets
are intercepted just prior to being handed to the network device and sent over
netlink via the NL80211_CMD_CONTROL_PORT_FRAME notification.
NL80211_ATTR_CONTROL_PORT_ETHERTYPE and NL80211_ATTR_MAC are included to
specify the control port frame protocol and source address respectively. If
the control port frame was received unencrypted then
NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT flag is also included. NL80211_ATTR_FRAME
attribute contains the raw control port frame with all transport layer headers
stripped (e.g. this would be the raw EAPoL frame).
Userspace can reply to control port frames either via legacy methods (by sending
frames to the network device) or via NL80211_CMD_CONTROL_PORT_FRAME request.
Userspace would included NL80211_ATTR_FRAME with the raw control port frame as
well as NL80211_Attr_MAC and NL80211_ATTR_CONTROL_PORT_ETHERTYPE attributes to
specify the destination address and protocol respectively. This allows
Pre-Authentication (protocol 0x88c7) frames to be sent via this mechanism as
well. Finally, NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT flag can be included to
tell the driver to send the frame unencrypted, e.g. for 4-Way handshake 4/4
frames.
The proposed patchset has been tested in a mac80211_hwsim based environment with
hostapd and iwd.
Signed-off-by: Johannes Berg <[email protected]>
|
|
If userspace requested control port frames to go over 80211, then do so.
The control packets are intercepted just prior to delivery of the packet
to the underlying network device.
Pre-authentication type frames (protocol: 0x88c7) are also forwarded
over nl80211.
Signed-off-by: Denis Kenzior <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
|
|
Signed-off-by: Denis Kenzior <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
|
|
Signed-off-by: Denis Kenzior <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
|
|
Signed-off-by: Denis Kenzior <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
|
|
Signed-off-by: Denis Kenzior <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
|
|
This commit implements the TX side of NL80211_CMD_CONTROL_PORT_FRAME.
Userspace provides the raw EAPoL frame using NL80211_ATTR_FRAME.
Userspace should also provide the destination address and the protocol
type to use when sending the frame. This is used to implement TX of
Pre-authentication frames. If CONTROL_PORT_ETHERTYPE_NO_ENCRYPT is
specified, then the driver will be asked not to encrypt the outgoing
frame.
A new EXT_FEATURE flag is introduced so that nl80211 code can check
whether a given wiphy has capability to pass EAPoL frames over nl80211.
Signed-off-by: Denis Kenzior <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
|
|
This commit also adds cfg80211_rx_control_port function. This is used
to generate a CMD_CONTROL_PORT_FRAME event out to userspace. The
conn_owner_nlportid is used as the unicast destination. This means that
userspace must specify NL80211_ATTR_SOCKET_OWNER flag if control port
over nl80211 routing is requested in NL80211_CMD_CONNECT,
NL80211_CMD_ASSOCIATE, NL80211_CMD_START_AP or IBSS/mesh join.
Signed-off-by: Denis Kenzior <[email protected]>
[johannes: fix return value of cfg80211_rx_control_port()]
Signed-off-by: Johannes Berg <[email protected]>
|