aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-06-15regualtor: pfuze100: correct sw1a/sw2 on pfuze3000Robin Gong1-21/+39
PFUZE100_SWB_REG is not proper for sw1a/sw2, because enable_mask/enable_reg is not correct. On PFUZE3000, sw1a/sw2 should be the same as sw1a/sw2 on pfuze100 except that voltages are not linear, so add new PFUZE3000_SW_REG and pfuze3000_sw_regulator_ops which like the non-linear PFUZE100_SW_REG and pfuze100_sw_regulator_ops. Fixes: 1dced996ee70 ("regulator: pfuze100: update voltage setting for pfuze3000 sw1a") Reported-by: Christophe Meynard <[email protected]> Signed-off-by: Robin Gong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2020-06-15io_uring: fix lazy work initPavel Begunkov1-0/+1
Don't leave garbage in req.work before punting async on -EAGAIN in io_iopoll_queue(). [ 140.922099] general protection fault, probably for non-canonical address 0xdead000000000100: 0000 [#1] PREEMPT SMP PTI ... [ 140.922105] RIP: 0010:io_worker_handle_work+0x1db/0x480 ... [ 140.922114] Call Trace: [ 140.922118] ? __next_timer_interrupt+0xe0/0xe0 [ 140.922119] io_wqe_worker+0x2a9/0x360 [ 140.922121] ? _raw_spin_unlock_irqrestore+0x24/0x40 [ 140.922124] kthread+0x12c/0x170 [ 140.922125] ? io_worker_handle_work+0x480/0x480 [ 140.922126] ? kthread_park+0x90/0x90 [ 140.922127] ret_from_fork+0x22/0x30 Fixes: 7cdaf587de7c ("io_uring: avoid whole io_wq_work copy for requests completed inline") Signed-off-by: Pavel Begunkov <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-06-15blk-mq: Remove redundant 'return' statementBaolin Wang1-1/+1
The blk_mq_all_tag_iter() is a void function, thus remove the redundant 'return' statement in this function. Signed-off-by: Baolin Wang <[email protected]> Reviewed-by: Ming Lei <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-06-15powerpc: Fix kernel crash in show_instructions() w/DEBUG_VIRTUALAneesh Kumar K.V1-9/+11
With CONFIG_DEBUG_VIRTUAL=y, we can hit a BUG() if we take a hard lockup watchdog interrupt when in OPAL mode. This happens in show_instructions() if the kernel takes the watchdog NMI IPI, or any other interrupt, with MSR_IR == 0. show_instructions() updates the variable pc in the loop and the second iteration will result in BUG(). We hit the BUG_ON due the below check in __va() #define __va(x) ({ VIRTUAL_BUG_ON((unsigned long)(x) >= PAGE_OFFSET); (void *)(unsigned long)((phys_addr_t)(x) | PAGE_OFFSET); }) Fix it by moving the check out of the loop. Also update nip so that the nip == pc check still matches. Fixes: 4dd7554a6456 ("powerpc/64: Add VIRTUAL_BUG_ON checks for __va and __pa addresses") Signed-off-by: Aneesh Kumar K.V <[email protected]> [mpe: Use IS_ENABLED(), massage change log] Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-06-15docs/arm64: Fix typo'd #define in sve.rstDave Martin1-3/+3
sve.rst describes a flag PR_SVE_SET_VL_INHERIT for the PR_SVE_SET_VL prctl, but there is no flag of this name. The flag is shared between the _GET and _SET calls, so the _SET prefix was dropped, giving the name PR_SVE_VL_INHERIT in the headers. Fix it. Signed-off-by: Dave Martin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2020-06-15arm64: remove TEXT_OFFSET randomizationArd Biesheuvel2-21/+0
TEXT_OFFSET was recently changed to 0x0, in preparation for its removal at a later stage, and a warning is emitted into the kernel log when the bootloader appears to have failed to take the TEXT_OFFSET image header value into account. Ironically, this warning itself fails to take TEXT_OFFSET into account, and compares the kernel image's alignment modulo 2M against a hardcoded value of 0x0, and so the warning will trigger spuriously when TEXT_OFFSET randomization is enabled. Given the intent to get rid of TEXT_OFFSET entirely, let's fix this oversight by just removing support for TEXT_OFFSET randomization. Signed-off-by: Ard Biesheuvel <[email protected]> Acked-by: Mark Rutland <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2020-06-15drm/i915: work around false-positive maybe-uninitialized warningArnd Bergmann1-0/+2
gcc-9 gets confused by the code flow in check_dirty_whitelist: drivers/gpu/drm/i915/gt/selftest_workarounds.c: In function 'check_dirty_whitelist': drivers/gpu/drm/i915/gt/selftest_workarounds.c:492:17: error: 'rsvd' may be used uninitialized in this function [-Werror=maybe-uninitialized] I could not figure out a good way to do this in a way that gcc understands better, so initialize the variable to zero, as last resort. Fixes: aee20aaed887 ("drm/i915: Implement read-only support in whitelist selftest") Signed-off-by: Arnd Bergmann <[email protected]> Reviewed-by: Chris Wilson <[email protected]> Signed-off-by: Chris Wilson <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit cc649a9eafc1ef5c40db023084cb94422d08aa84) Signed-off-by: Joonas Lahtinen <[email protected]>
2020-06-15drm/i915/pmu: avoid an maybe-uninitialized warningArnd Bergmann1-42/+42
Conditional spinlocks make it hard for gcc and for lockdep to follow the code flow. This one causes a warning with at least gcc-9 and higher: In file included from include/linux/irq.h:14, from drivers/gpu/drm/i915/i915_pmu.c:7: drivers/gpu/drm/i915/i915_pmu.c: In function 'i915_sample': include/linux/spinlock.h:289:3: error: 'flags' may be used uninitialized in this function [-Werror=maybe-uninitialized] 289 | _raw_spin_unlock_irqrestore(lock, flags); \ | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/i915/i915_pmu.c:288:17: note: 'flags' was declared here 288 | unsigned long flags; | ^~~~~ Split out the part between the locks into a separate function for readability and to let the compiler figure out what the logic actually is. Fixes: d79e1bd676f0 ("drm/i915/pmu: Only use exclusive mmio access for gen7") Signed-off-by: Arnd Bergmann <[email protected]> Reviewed-by: Chris Wilson <[email protected]> Signed-off-by: Chris Wilson <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 6ec81b82732e2b4a5ac0853fd33919ff1ca94238) Signed-off-by: Joonas Lahtinen <[email protected]>
2020-06-15drm/i915/gt: Incorporate the virtual engine into timeslicingChris Wilson1-6/+24
It was quite the oversight to only factor in the normal queue to decide the timeslicing switch priority. By leaving out the next virtual request from the priority decision, we would not timeslice the current engine if there was an available virtual request. Testcase: igt/gem_exec_balancer/sliced Fixes: 3df2deed411e ("drm/i915/execlists: Enable timeslice on partial virtual engine dequeue") Signed-off-by: Chris Wilson <[email protected]> Cc: Mika Kuoppala <[email protected]> Cc: Tvrtko Ursulin <[email protected]> Reviewed-by: Tvrtko Ursulin <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 6ad249ba59badc7ff157d4db1f835748f0e2c9b6) Signed-off-by: Joonas Lahtinen <[email protected]>
2020-06-15crypto: drbg - always try to free Jitter RNG instanceStephan Müller1-2/+4
The Jitter RNG is unconditionally allocated as a seed source follwoing the patch 97f2650e5040. Thus, the instance must always be deallocated. Reported-by: [email protected] Fixes: 97f2650e5040 ("crypto: drbg - always seeded with SP800-90B ...") Signed-off-by: Stephan Mueller <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2020-06-15crypto: marvell/octeontx - Fix a potential NULL dereferenceDan Carpenter1-4/+7
Smatch reports that: drivers/crypto/marvell/octeontx/otx_cptvf_algs.c:132 otx_cpt_aead_callback() warn: variable dereferenced before check 'cpt_info' (see line 121) This function is called from process_pending_queue() as: drivers/crypto/marvell/octeontx/otx_cptvf_reqmgr.c 599 /* 600 * Call callback after current pending entry has been 601 * processed, we don't do it if the callback pointer is 602 * invalid. 603 */ 604 if (callback) 605 callback(res_code, areq, cpt_info); It does appear to me that "cpt_info" can be NULL so this could lead to a NULL dereference. Fixes: 10b4f09491bf ("crypto: marvell - add the Virtual Function driver for CPT") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2020-06-15crypto: algboss - don't wait during notifier callbackEric Biggers1-2/+0
When a crypto template needs to be instantiated, CRYPTO_MSG_ALG_REQUEST is sent to crypto_chain. cryptomgr_schedule_probe() handles this by starting a thread to instantiate the template, then waiting for this thread to complete via crypto_larval::completion. This can deadlock because instantiating the template may require loading modules, and this (apparently depending on userspace) may need to wait for the crc-t10dif module (lib/crc-t10dif.c) to be loaded. But crc-t10dif's module_init function uses crypto_register_notifier() and therefore takes crypto_chain.rwsem for write. That can't proceed until the notifier callback has finished, as it holds this semaphore for read. Fix this by removing the wait on crypto_larval::completion from within cryptomgr_schedule_probe(). It's actually unnecessary because crypto_alg_mod_lookup() calls crypto_larval_wait() itself after sending CRYPTO_MSG_ALG_REQUEST. This only actually became a problem in v4.20 due to commit b76377543b73 ("crc-t10dif: Pick better transform if one becomes available"), but the unnecessary wait was much older. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207159 Reported-by: Mike Gerow <[email protected]> Fixes: 398710379f51 ("crypto: algapi - Move larval completion into algboss") Cc: <[email protected]> # v3.6+ Cc: Martin K. Petersen <[email protected]> Signed-off-by: Eric Biggers <[email protected]> Reported-by: Kai Lüke <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2020-06-15crypto: caam - fix typosHeinrich Schuchardt4-13/+13
Fix CAAM related typos. Signed-off-by: Heinrich Schuchardt <[email protected]> Reviewed-by: Horia Geantă <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2020-06-15crypto: ccp - Fix sparse warnings in sev-devHerbert Xu2-8/+17
This patch fixes a bunch of sparse warnings in sev-dev where the __user marking is incorrectly handled. Reported-by: kbuild test robot <[email protected]> Fixes: 7360e4b14350 ("crypto: ccp: Implement SEV_PEK_CERT_IMPORT...") Fixes: e799035609e1 ("crypto: ccp: Implement SEV_PEK_CSR ioctl...") Fixes: 76a2b524a4b1 ("crypto: ccp: Implement SEV_PDH_CERT_EXPORT...") Fixes: d6112ea0cb34 ("crypto: ccp - introduce SEV_GET_ID2 command") Signed-off-by: Herbert Xu <[email protected]> Reviewed-by: Brijesh Singh <[email protected]> Acked-by: Tom Lendacky <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2020-06-15crypto: hisilicon - Cap block size at 2^31Herbert Xu1-1/+2
The function hisi_acc_create_sg_pool may allocate a block of memory of size PAGE_SIZE * 2^(MAX_ORDER - 1). This value may exceed 2^31 on ia64, which would overflow the u32. This patch caps it at 2^31. Reported-by: kernel test robot <[email protected]> Fixes: d8ac7b85236b ("crypto: hisilicon - fix large sgl memory...") Signed-off-by: Herbert Xu <[email protected]>
2020-06-15crypto: algif_skcipher - Cap recv SG list at ctx->usedHerbert Xu1-5/+1
Somewhere along the line the cap on the SG list length for receive was lost. This patch restores it and removes the subsequent test which is now redundant. Fixes: 2d97591ef43d ("crypto: af_alg - consolidation of...") Cc: <[email protected]> Signed-off-by: Herbert Xu <[email protected]> Reviewed-by: Stephan Mueller <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2020-06-15hwrng: ks-sa - Fix runtime PM imbalance on errorDinghao Liu1-0/+1
pm_runtime_get_sync() increments the runtime PM usage counter even the call returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by: Dinghao Liu <[email protected]> Reviewed-by: Alexander Sverdlin <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2020-06-15dma-pool: decouple DMA_REMAP from DMA_COHERENT_POOLDavid Rientjes1-5/+5
DMA_REMAP is an unnecessary requirement for AMD SEV, which requires DMA_COHERENT_POOL, so avoid selecting it when it is otherwise unnecessary. The only other requirement for DMA coherent pools is DMA_DIRECT_REMAP, so ensure that properly selects the config option when needed. Fixes: 82fef0ad811f ("x86/mm: unencrypted non-blocking DMA allocations use coherent pools") Reported-by: Alex Xu (Hello71) <[email protected]> Signed-off-by: David Rientjes <[email protected]> Tested-by: Alex Xu (Hello71) <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2020-06-15Makefile: Improve compressed debug info support detectionArvind Sankar2-2/+2
Commit 10e68b02c861 ("Makefile: support compressed debug info") added support for compressed debug sections. Support is detected by checking - does the compiler support -gz=zlib - does the assembler support --compressed-debug-sections=zlib - does the linker support --compressed-debug-sections=zlib However, the gcc driver's support for this option is somewhat convoluted. The driver's builtin specs are set based on the version of binutils that it was configured with. It reports an error if the configure-time linker/assembler (i.e., not necessarily the actual assembler that will be run) do not support the option, but only if the assembler (or linker) is actually invoked when -gz=zlib is passed. The cc-option check in scripts/Kconfig.include does not invoke the assembler, so the gcc driver reports success even if it does not support the option being passed to the assembler. Because the as-option check passes the option directly to the assembler via -Wa,--compressed-debug-sections=zlib, the gcc driver does not see this option and will never report an error. Combined with an installed version of binutils that is more recent than the one the compiler was built with, it is possible for all three tests to succeed, yet an actual compilation with -gz=zlib to fail. Moreover, it is unnecessary to explicitly pass --compressed-debug-sections=zlib to the assembler via -Wa, since the driver will do that automatically when it supports -gz=zlib. Convert the as-option to just -gz=zlib, simplifying it as well as performing a better test of the gcc driver's capabilities. Reported-by: kernel test robot <[email protected]> Signed-off-by: Arvind Sankar <[email protected]> Reviewed-by: Nick Desaulniers <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2020-06-14bcache: pr_info() format clean up in bcache_device_init()Coly Li1-2/+1
scripts/checkpatch.pl reports following warning for patch ("bcache: check and adjust logical block size for backing devices"), WARNING: quoted string split across lines #146: FILE: drivers/md/bcache/super.c:896: + pr_info("%s: sb/logical block size (%u) greater than page size " + "(%lu) falling back to device logical block size (%u)", There are two things to fix up, - The kernel message print should be in a single line. - pr_info() won't automatically add new line since v5.8, a '\n' should be added. This patch just does the above cleanup in bcache_device_init(). Signed-off-by: Coly Li <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-06-14bcache: use delayed kworker fo asynchronous devices registrationColy Li1-6/+8
This patch changes the asynchronous registration kworker to a delayed kworker. There is probability queue_work() queues the async registration kworker to the same CPU (even though very little), then the process which writing sysfs interface to reigster bcache device may won't return immeidately. queue_delayed_work() in this patch will delay 10 jiffies before insert the kworker to run queue, which makes sure the registering process may always returns to user space in time. Fixes: 9e23ccf8f0a22 ("bcache: asynchronous devices registration") Signed-off-by: Coly Li <[email protected]> Cc: Hannes Reinecke <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-06-14bcache: check and adjust logical block size for backing devicesMauricio Faria de Oliveira1-3/+19
It's possible for a block driver to set logical block size to a value greater than page size incorrectly; e.g. bcache takes the value from the superblock, set by the user w/ make-bcache. This causes a BUG/NULL pointer dereference in the path: __blkdev_get() -> set_init_blocksize() // set i_blkbits based on ... -> bdev_logical_block_size() -> queue_logical_block_size() // ... this value -> bdev_disk_changed() ... -> blkdev_readpage() -> block_read_full_page() -> create_page_buffers() // size = 1 << i_blkbits -> create_empty_buffers() // give size/take pointer -> alloc_page_buffers() // return NULL .. BUG! Because alloc_page_buffers() is called with size > PAGE_SIZE, thus it initializes head = NULL, skips the loop, return head; then create_empty_buffers() gets (and uses) the NULL pointer. This has been around longer than commit ad6bf88a6c19 ("block: fix an integer overflow in logical block size"); however, it increased the range of values that can trigger the issue. Previously only 8k/16k/32k (on x86/4k page size) would do it, as greater values overflow unsigned short to zero, and queue_ logical_block_size() would then use the default of 512. Now the range with unsigned int is much larger, and users w/ the 512k value, which happened to be zero'ed previously and work fine, started to hit this issue -- as the zero is gone, and queue_logical_block_size() does return 512k (>PAGE_SIZE.) Fix this by checking the bcache device's logical block size, and if it's greater than page size, fallback to the backing/ cached device's logical page size. This doesn't affect cache devices as those are still checked for block/page size in read_super(); only the backing/cached devices are not. Apparently it's a regression from commit 2903381fce71 ("bcache: Take data offset from the bdev superblock."), moving the check into BCACHE_SB_VERSION_CDEV only. Now that we have superblocks of backing devices out there with this larger value, we cannot refuse to load them (i.e., have a similar check in _BDEV.) Ideally perhaps bcache should use all values from the backing device (physical/logical/io_min block size)? But for now just fix the problematic case. Test-case: # IMG=/root/disk.img # dd if=/dev/zero of=$IMG bs=1 count=0 seek=1G # DEV=$(losetup --find --show $IMG) # make-bcache --bdev $DEV --block 8k < see dmesg > Before: # uname -r 5.7.0-rc7 [ 55.944046] BUG: kernel NULL pointer dereference, address: 0000000000000000 ... [ 55.949742] CPU: 3 PID: 610 Comm: bcache-register Not tainted 5.7.0-rc7 #4 ... [ 55.952281] RIP: 0010:create_empty_buffers+0x1a/0x100 ... [ 55.966434] Call Trace: [ 55.967021] create_page_buffers+0x48/0x50 [ 55.967834] block_read_full_page+0x49/0x380 [ 55.972181] do_read_cache_page+0x494/0x610 [ 55.974780] read_part_sector+0x2d/0xaa [ 55.975558] read_lba+0x10e/0x1e0 [ 55.977904] efi_partition+0x120/0x5a6 [ 55.980227] blk_add_partitions+0x161/0x390 [ 55.982177] bdev_disk_changed+0x61/0xd0 [ 55.982961] __blkdev_get+0x350/0x490 [ 55.983715] __device_add_disk+0x318/0x480 [ 55.984539] bch_cached_dev_run+0xc5/0x270 [ 55.986010] register_bcache.cold+0x122/0x179 [ 55.987628] kernfs_fop_write+0xbc/0x1a0 [ 55.988416] vfs_write+0xb1/0x1a0 [ 55.989134] ksys_write+0x5a/0xd0 [ 55.989825] do_syscall_64+0x43/0x140 [ 55.990563] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 55.991519] RIP: 0033:0x7f7d60ba3154 ... After: # uname -r 5.7.0.bcachelbspgsz [ 31.672460] bcache: bcache_device_init() bcache0: sb/logical block size (8192) greater than page size (4096) falling back to device logical block size (512) [ 31.675133] bcache: register_bdev() registered backing device loop0 # grep ^ /sys/block/bcache0/queue/*_block_size /sys/block/bcache0/queue/logical_block_size:512 /sys/block/bcache0/queue/physical_block_size:8192 Reported-by: Ryan Finnie <[email protected]> Reported-by: Sebastian Marsching <[email protected]> Signed-off-by: Mauricio Faria de Oliveira <[email protected]> Signed-off-by: Coly Li <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-06-14bcache: fix potential deadlock problem in btree_gc_coalesceZhiqiang Liu1-2/+6
coccicheck reports: drivers/md//bcache/btree.c:1538:1-7: preceding lock on line 1417 In btree_gc_coalesce func, if the coalescing process fails, we will goto to out_nocoalesce tag directly without releasing new_nodes[i]->write_lock. Then, it will cause a deadlock when trying to acquire new_nodes[i]-> write_lock for freeing new_nodes[i] before return. btree_gc_coalesce func details as follows: if alloc new_nodes[i] fails: goto out_nocoalesce; // obtain new_nodes[i]->write_lock mutex_lock(&new_nodes[i]->write_lock) // main coalescing process for (i = nodes - 1; i > 0; --i) [snipped] if coalescing process fails: // Here, directly goto out_nocoalesce // tag will cause a deadlock goto out_nocoalesce; [snipped] // release new_nodes[i]->write_lock mutex_unlock(&new_nodes[i]->write_lock) // coalesing succ, return return; out_nocoalesce: btree_node_free(new_nodes[i]) // free new_nodes[i] // obtain new_nodes[i]->write_lock mutex_lock(&new_nodes[i]->write_lock); // set flag for reuse clear_bit(BTREE_NODE_dirty, &ew_nodes[i]->flags); // release new_nodes[i]->write_lock mutex_unlock(&new_nodes[i]->write_lock); To fix the problem, we add a new tag 'out_unlock_nocoalesce' for releasing new_nodes[i]->write_lock before out_nocoalesce tag. If coalescing process fails, we will go to out_unlock_nocoalesce tag for releasing new_nodes[i]->write_lock before free new_nodes[i] in out_nocoalesce tag. (Coly Li helps to clean up commit log format.) Fixes: 2a285686c109816 ("bcache: btree locking rework") Signed-off-by: Zhiqiang Liu <[email protected]> Signed-off-by: Coly Li <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-06-14Linux 5.8-rc1Linus Torvalds1-2/+2
2020-06-14Merge tag 'LSM-add-setgid-hook-5.8-author-fix' of ↵Linus Torvalds5-1/+40
git://github.com/micah-morton/linux Pull SafeSetID update from Micah Morton: "Add additional LSM hooks for SafeSetID SafeSetID is capable of making allow/deny decisions for set*uid calls on a system, and we want to add similar functionality for set*gid calls. The work to do that is not yet complete, so probably won't make it in for v5.8, but we are looking to get this simple patch in for v5.8 since we have it ready. We are planning on the rest of the work for extending the SafeSetID LSM being merged during the v5.9 merge window" * tag 'LSM-add-setgid-hook-5.8-author-fix' of git://github.com/micah-morton/linux: security: Add LSM hooks to set*gid syscalls
2020-06-14security: Add LSM hooks to set*gid syscallsThomas Cedeno5-1/+40
The SafeSetID LSM uses the security_task_fix_setuid hook to filter set*uid() syscalls according to its configured security policy. In preparation for adding analagous support in the LSM for set*gid() syscalls, we add the requisite hook here. Tested by putting print statements in the security_task_fix_setgid hook and seeing them get hit during kernel boot. Signed-off-by: Thomas Cedeno <[email protected]> Signed-off-by: Micah Morton <[email protected]>
2020-06-14Merge tag 'for-5.8-part2-tag' of ↵Linus Torvalds7-234/+286
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs updates from David Sterba: "This reverts the direct io port to iomap infrastructure of btrfs merged in the first pull request. We found problems in invalidate page that don't seem to be fixable as regressions or without changing iomap code that would not affect other filesystems. There are four reverts in total, but three of them are followup cleanups needed to revert a43a67a2d715 cleanly. The result is the buffer head based implementation of direct io. Reverts are not great, but under current circumstances I don't see better options" * tag 'for-5.8-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Revert "btrfs: switch to iomap_dio_rw() for dio" Revert "fs: remove dio_end_io()" Revert "btrfs: remove BTRFS_INODE_READDIO_NEED_LOCK" Revert "btrfs: split btrfs_direct_IO to read and write part"
2020-06-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds111-647/+1344
Pull networking fixes from David Miller: 1) Fix cfg80211 deadlock, from Johannes Berg. 2) RXRPC fails to send norigications, from David Howells. 3) MPTCP RM_ADDR parsing has an off by one pointer error, fix from Geliang Tang. 4) Fix crash when using MSG_PEEK with sockmap, from Anny Hu. 5) The ucc_geth driver needs __netdev_watchdog_up exported, from Valentin Longchamp. 6) Fix hashtable memory leak in dccp, from Wang Hai. 7) Fix how nexthops are marked as FDB nexthops, from David Ahern. 8) Fix mptcp races between shutdown and recvmsg, from Paolo Abeni. 9) Fix crashes in tipc_disc_rcv(), from Tuong Lien. 10) Fix link speed reporting in iavf driver, from Brett Creeley. 11) When a channel is used for XSK and then reused again later for XSK, we forget to clear out the relevant data structures in mlx5 which causes all kinds of problems. Fix from Maxim Mikityanskiy. 12) Fix memory leak in genetlink, from Cong Wang. 13) Disallow sockmap attachments to UDP sockets, it simply won't work. From Lorenz Bauer. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits) net: ethernet: ti: ale: fix allmulti for nu type ale net: ethernet: ti: am65-cpsw-nuss: fix ale parameters init net: atm: Remove the error message according to the atomic context bpf: Undo internal BPF_PROBE_MEM in BPF insns dump libbpf: Support pre-initializing .bss global variables tools/bpftool: Fix skeleton codegen bpf: Fix memlock accounting for sock_hash bpf: sockmap: Don't attach programs to UDP sockets bpf: tcp: Recv() should return 0 when the peer socket is closed ibmvnic: Flush existing work items before device removal genetlink: clean up family attributes allocations net: ipa: header pad field only valid for AP->modem endpoint net: ipa: program upper nibbles of sequencer type net: ipa: fix modem LAN RX endpoint id net: ipa: program metadata mask differently ionic: add pcie_print_link_status rxrpc: Fix race between incoming ACK parser and retransmitter net/mlx5: E-Switch, Fix some error pointer dereferences net/mlx5: Don't fail driver on failure to create debugfs net/mlx5e: CT: Fix ipv6 nat header rewrite actions ...
2020-06-14Revert "btrfs: switch to iomap_dio_rw() for dio"David Sterba4-166/+169
This reverts commit a43a67a2d715540c1368b9501a22b0373b5874c0. This patch reverts the main part of switching direct io implementation to iomap infrastructure. There's a problem in invalidate page that couldn't be solved as regression in this development cycle. The problem occurs when buffered and direct io are mixed, and the ranges overlap. Although this is not recommended, filesystems implement measures or fallbacks to make it somehow work. In this case, fallback to buffered IO would be an option for btrfs (this already happens when direct io is done on compressed data), but the change would be needed in the iomap code, bringing new semantics to other filesystems. Another problem arises when again the buffered and direct ios are mixed, invalidation fails, then -EIO is set on the mapping and fsync will fail, though there's no real error. There have been discussions how to fix that, but revert seems to be the least intrusive option. Link: https://lore.kernel.org/linux-btrfs/20200528192103.xm45qoxqmkw7i5yl@fiona/ Signed-off-by: David Sterba <[email protected]>
2020-06-13net: ethernet: ti: ale: fix allmulti for nu type aleGrygorii Strashko1-9/+40
On AM65xx MCU CPSW2G NUSS and 66AK2E/L NUSS allmulti setting does not allow unregistered mcast packets to pass. This happens, because ALE VLAN entries on these SoCs do not contain port masks for reg/unreg mcast packets, but instead store indexes of ALE_VLAN_MASK_MUXx_REG registers which intended for store port masks for reg/unreg mcast packets. This path was missed by commit 9d1f6447274f ("net: ethernet: ti: ale: fix seeing unreg mcast packets with promisc and allmulti disabled"). Hence, fix it by taking into account ALE type in cpsw_ale_set_allmulti(). Fixes: 9d1f6447274f ("net: ethernet: ti: ale: fix seeing unreg mcast packets with promisc and allmulti disabled") Signed-off-by: Grygorii Strashko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-13net: ethernet: ti: am65-cpsw-nuss: fix ale parameters initGrygorii Strashko1-1/+1
The ALE parameters structure is created on stack, so it has to be reset before passing to cpsw_ale_create() to avoid garbage values. Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver") Signed-off-by: Grygorii Strashko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller27-93/+348
Alexei Starovoitov says: ==================== pull-request: bpf 2020-06-12 The following pull-request contains BPF updates for your *net* tree. We've added 26 non-merge commits during the last 10 day(s) which contain a total of 27 files changed, 348 insertions(+), 93 deletions(-). The main changes are: 1) sock_hash accounting fix, from Andrey. 2) libbpf fix and probe_mem sanitizing, from Andrii. 3) sock_hash fixes, from Jakub. 4) devmap_val fix, from Jesper. 5) load_bytes_relative fix, from YiFei. ==================== Signed-off-by: David S. Miller <[email protected]>
2020-06-13net: atm: Remove the error message according to the atomic contextLiao Pingfang1-3/+1
Looking into the context (atomic!) and the error message should be dropped. Signed-off-by: Liao Pingfang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-13Merge tag '5.8-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds19-57/+571
Pull more cifs updates from Steve French: "12 cifs/smb3 fixes, 2 for stable. - add support for idsfromsid on create and chgrp/chown allowing ability to save owner information more naturally for some workloads - improve query info (getattr) when SMB3.1.1 posix extensions are negotiated by using new query info level" * tag '5.8-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: smb3: Add debug message for new file creation with idsfromsid mount option cifs: fix chown and chgrp when idsfromsid mount option enabled smb3: allow uid and gid owners to be set on create with idsfromsid mount option smb311: Add tracepoints for new compound posix query info smb311: add support for using info level for posix extensions query smb311: Add support for lookup with posix extensions query info smb311: Add support for SMB311 query info (non-compounded) SMB311: Add support for query info using posix extensions (level 100) smb3: add indatalen that can be a non-zero value to calculation of credit charge in smb2 ioctl smb3: fix typo in mount options displayed in /proc/mounts cifs: Add get_security_type_str function to return sec type. smb3: extend fscache mount volume coherency check
2020-06-13binderfs: add gitignore for generated sample programLinus Torvalds1-0/+1
Let's keep "git status" happy and quiet. Fixes: 9762dc1432e1 ("samples: add binderfs sample program Fixes: fca5e94921d5 ("samples: binderfs: really compile this sample and fix build issues") Signed-off-by: Linus Torvalds <[email protected]>
2020-06-13doc: don't use deprecated "---help---" markers in target docsLinus Torvalds1-2/+2
I'm not convinced the script makes useful automaed help lines anyway, but since we're trying to deprecate the use of "---help---" in Kconfig files, let's fix the doc example code too. See commit a7f7f6248d97 ("treewide: replace '---help---' in Kconfig files with 'help'") Cc: Masahiro Yamada <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2020-06-13Merge tag 'kbuild-v5.8-2' of ↵Linus Torvalds439-2489/+2473
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - fix build rules in binderfs sample - fix build errors when Kbuild recurses to the top Makefile - covert '---help---' in Kconfig to 'help' * tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: treewide: replace '---help---' in Kconfig files with 'help' kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables samples: binderfs: really compile this sample and fix build issues
2020-06-13Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds19-193/+195
Pull more SCSI updates from James Bottomley: "This is the set of changes collected since just before the merge window opened. It's mostly minor fixes in drivers. The one non-driver set is the three optical disk (sr) changes where two are error path fixes and one is a helper conversion. The big driver change is the hpsa compat_alloc_userspace rework by Al so he can kill the remaining user. This has been tested and acked by the maintainer" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (21 commits) scsi: acornscsi: Fix an error handling path in acornscsi_probe() scsi: storvsc: Remove memset before memory freeing in storvsc_suspend() scsi: cxlflash: Remove an unnecessary NULL check scsi: ibmvscsi: Don't send host info in adapter info MAD after LPM scsi: sr: Fix sr_probe() missing deallocate of device minor scsi: sr: Fix sr_probe() missing mutex_destroy scsi: st: Convert convert get_user_pages() --> pin_user_pages() scsi: target: Rename target_setup_cmd_from_cdb() to target_cmd_parse_cdb() scsi: target: Fix NULL pointer dereference scsi: target: Initialize LUN in transport_init_se_cmd() scsi: target: Factor out a new helper, target_cmd_init_cdb() scsi: hpsa: hpsa_ioctl(): Tidy up a bit scsi: hpsa: Get rid of compat_alloc_user_space() scsi: hpsa: Don't bother with vmalloc for BIG_IOCTL_Command_struct scsi: hpsa: Lift {BIG_,}IOCTL_Command_struct copy{in,out} into hpsa_ioctl() scsi: ufs: Remove redundant urgent_bkop_lvl initialization scsi: ufs: Don't update urgent bkops level when toggling auto bkops scsi: qedf: Remove redundant initialization of variable rc scsi: mpt3sas: Fix memset() in non-RDPQ mode scsi: iscsi: Fix reference count leak in iscsi_boot_create_kobj ...
2020-06-13Merge branch 'i2c/for-5.8' of ↵Linus Torvalds80-1391/+5867
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "I2C has quite some patches for you this time. I hope it is the move to per-driver-maintainers which is now showing results. We will see. The big news is two new drivers (Nuvoton NPCM and Qualcomm CCI), larger refactoring of the Designware, Tegra, and PXA drivers, the Cadence driver supports being a slave now, and there is support to instanciate SPD eeproms for well-known cases (which will be user-visible because the i801 driver supports it), and some devm_platform_ioremap_resource() conversions which blow up the diffstat. Note that I applied the Nuvoton driver quite late, so some minor fixup patches arrived during the merge window. I chose to apply them right away because they were trivial" * 'i2c/for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (109 commits) i2c: Drop stray comma in MODULE_AUTHOR statements i2c: npcm7xx: npcm_i2caddr[] can be static MAINTAINERS: npcm7xx: Add maintainer for Nuvoton NPCM BMC i2c: npcm7xx: Fix a couple of error codes in probe i2c: icy: Fix build with CONFIG_AMIGA_PCMCIA=n i2c: npcm7xx: Remove unnecessary parentheses i2c: npcm7xx: Add support for slave mode for Nuvoton i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver dt-bindings: i2c: npcm7xx: add NPCM I2C controller i2c: pxa: don't error out if there's no pinctrl i2c: add 'single-master' property to generic bindings i2c: designware: Add Baikal-T1 System I2C support i2c: designware: Move reg-space remapping into a dedicated function i2c: designware: Retrieve quirk flags as early as possible i2c: designware: Convert driver to using regmap API i2c: designware: Discard Cherry Trail model flag i2c: designware: Add Baytrail sem config DW I2C platform dependency i2c: designware: slave: Set DW I2C core module dependency i2c: designware: Use `-y` to build multi-object modules dt-bindings: i2c: dw: Add Baikal-T1 SoC I2C controller ...
2020-06-13Merge tag 'media/v5.8-2' of ↵Linus Torvalds680-6804/+5144
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull more media updates from Mauro Carvalho Chehab: - a set of atomisp patches. They remove several abstraction layers, and fixes clang and gcc warnings (that were hidden via some macros that were disabling 4 or 5 types of warnings there). There are also some important fixes and sensor auto-detection on newer BIOSes via ACPI _DCM tables. - some fixes * tag 'media/v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (95 commits) media: rkvdec: Fix H264 scaling list order media: v4l2-ctrls: Unset correct HEVC loop filter flag media: videobuf2-dma-contig: fix bad kfree in vb2_dma_contig_clear_max_seg_size media: v4l2-subdev.rst: correct information about v4l2 events media: s5p-mfc: Properly handle dma_parms for the allocated devices media: medium: cec: Make MEDIA_CEC_SUPPORT default to n if !MEDIA_SUPPORT media: cedrus: Implement runtime PM media: cedrus: Program output format during each run media: atomisp: improve ACPI/DMI detection logs media: Revert "media: atomisp: add Asus Transform T101HA ACPI vars" media: Revert "media: atomisp: Add some ACPI detection info" media: atomisp: improve sensor detection code to use _DSM table media: atomisp: get rid of an iomem abstraction layer media: atomisp: get rid of a string_support.h abstraction layer media: atomisp: use strscpy() instead of less secure variants media: atomisp: set DFS to MAX if sensor doesn't report fps media: atomisp: use different dfs failed messages media: atomisp: change the detection of ISP2401 at runtime media: atomisp: use macros from intel-family.h media: atomisp: don't set hpll_freq twice with different values ...
2020-06-13Merge tag 'libnvdimm-for-5.8' of ↵Linus Torvalds4-9/+7
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "Small collection of cleanups to rework usage of ->queuedata and the GUID api" * tag 'libnvdimm-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: nvdimm/pmem: stop using ->queuedata nvdimm/btt: stop using ->queuedata nvdimm/blk: stop using ->queuedata libnvdimm: Replace guid_copy() with import_guid() where it makes sense
2020-06-13watch_queue: add gitignore for generated sample programLinus Torvalds1-0/+1
Let's keep "git status" happy and quiet. Fixes: f5b5a164f9a1 ("Add sample notification program") Signed-off-by: Linus Torvalds <[email protected]>
2020-06-13Merge tag 'iomap-5.8-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds1-1/+1
Pull iomap fix from Darrick Wong: "A single iomap bug fix for a variable type mistake on 32-bit architectures, fixing an integer overflow problem in the unshare actor" * tag 'iomap-5.8-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: iomap: Fix unsharing of an extent >2GB on a 32-bit machine
2020-06-13Merge tag 'xfs-5.8-merge-9' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds1-1/+3
Pull xfs fix from Darrick Wong: "We've settled down into the bugfix phase; this one fixes a resource leak on an error bailout path" * tag 'xfs-5.8-merge-9' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: Add the missed xfs_perag_put() for xfs_ifree_cluster()
2020-06-13Merge tag '9p-for-5.8' of git://github.com/martinetd/linuxLinus Torvalds1-27/+34
Pull 9p update from Dominique Martinet: "Another very quiet cycle... Only one commit: increase the size of the ring used for xen transport" * tag '9p-for-5.8' of git://github.com/martinetd/linux: 9p/xen: increase XEN_9PFS_RING_ORDER
2020-06-13Merge tag 'powerpc-5.8-2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fix from Michael Ellerman: "One fix for a recent change which broke nested KVM guests on Power9. Thanks to Alexey Kardashevskiy" * tag 'powerpc-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: KVM: PPC: Fix nested guest RC bits update
2020-06-13Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds2-2/+64
Pull ARM fixes from Russell King: - fix for "hex" Kconfig default to use 0x0 rather than 0 to allow these to be removed from defconfigs - fix from Ard Biesheuvel for EFI HYP mode booting * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8985/1: efi/decompressor: deal with HYP mode boot gracefully ARM: 8984/1: Kconfig: set default ZBOOT_ROM_TEXT/BSS value to 0x0
2020-06-13Merge tag 'for-linus' of git://github.com/openrisc/linuxLinus Torvalds1-2/+2
Pull OpenRISC update from Stafford Horne: "One patch found wile I was getting the glibc port ready: fix issue with clone TLS arg getting overwritten" * tag 'for-linus' of git://github.com/openrisc/linux: openrisc: Fix issue with argument clobbering for clone/fork
2020-06-13Merge branch 'for-linus' of ↵Linus Torvalds8-30/+121
git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha Pull alpha updates from Matt Turner: "A few changes for alpha. They're mostly small janitorial fixes but there's also a build fix and most notably a patch from Mikulas that fixes a hang on boot on the Avanti platform, which required quite a bit of work and review" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha: alpha: Fix build around srm_sysrq_reboot_op alpha: c_next should increase position index alpha: Replace sg++ with sg = sg_next(sg) alpha: fix memory barriers so that they conform to the specification alpha: remove unneeded semicolon in sys_eiger.c alpha: remove unneeded semicolon in osf_sys.c alpha: Replace strncmp with str_has_prefix alpha: fix rtc port ranges alpha: Kconfig: pedantic formatting
2020-06-13Merge tag 'ras-core-2020-06-12' of ↵Linus Torvalds28-320/+306
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 RAS updates from Thomas Gleixner: "RAS updates from Borislav Petkov: - Unmap a whole guest page if an MCE is encountered in it to avoid follow-on MCEs leading to the guest crashing, by Tony Luck. This change collided with the entry changes and the merge resolution would have been rather unpleasant. To avoid that the entry branch was merged in before applying this. The resulting code did not change over the rebase. - AMD MCE error thresholding machinery cleanup and hotplug sanitization, by Thomas Gleixner. - Change the MCE notifiers to denote whether they have handled the error and not break the chain early by returning NOTIFY_STOP, thus giving the opportunity for the later handlers in the chain to see it. By Tony Luck. - Add AMD family 0x17, models 0x60-6f support, by Alexander Monakov. - Last but not least, the usual round of fixes and improvements" * tag 'ras-core-2020-06-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) x86/mce/dev-mcelog: Fix -Wstringop-truncation warning about strncpy() x86/{mce,mm}: Unmap the entire page if the whole page is affected and poisoned EDAC/amd64: Add AMD family 17h model 60h PCI IDs hwmon: (k10temp) Add AMD family 17h model 60h PCI match x86/amd_nb: Add AMD family 17h model 60h PCI IDs x86/mcelog: Add compat_ioctl for 32-bit mcelog support x86/mce: Drop bogus comment about mce.kflags x86/mce: Fixup exception only for the correct MCEs EDAC: Drop the EDAC report status checks x86/mce: Add mce=print_all option x86/mce: Change default MCE logger to check mce->kflags x86/mce: Fix all mce notifiers to update the mce->kflags bitmask x86/mce: Add a struct mce.kflags field x86/mce: Convert the CEC to use the MCE notifier x86/mce: Rename "first" function as "early" x86/mce/amd, edac: Remove report_gart_errors x86/mce/amd: Make threshold bank setting hotplug robust x86/mce/amd: Cleanup threshold device remove path x86/mce/amd: Straighten CPU hotplug path x86/mce/amd: Sanitize thresholding device creation hotplug path ...
Powered by cgit, Gruvboxed by Blaster4385.