aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2017-12-31ARM: dts: at91: sama5d3: TC blocks are also simple-mfd and syscon devicesAlexandre Belloni2-2/+6
Add simple-mfd and syscon to the TC blocks to allow to register one of the channels as clocksource properly at boot time and free up the remaining channels for other use. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: kizboxmini: use TCB0 as timersAlexandre Belloni1-0/+12
Use tcb0 for timers as selected in at91_dt_defconfig. Cc: Antoine Aubert <a.aubert@overkiz.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: cosino: use TCB0 as timersAlexandre Belloni1-0/+12
Use tcb0 for timers as selected in at91_dt_defconfig. Cc: Rodolfo Giometti <giometti@linux.it> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: acme/g25: use TCB0 as timersAlexandre Belloni2-0/+24
Use tcb0 for timers as selected in at91_dt_defconfig. Cc: Sergio Tanzilli <tanzilli@acmesystems.it> Cc: Douglas Gilbert <dgilbert@interlog.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: at91sam9x5cm: use TCB0 as timersAlexandre Belloni1-0/+12
Use tcb0 for timers as selected in at91_dt_defconfig. [tested on at91sam9x25ek and at91sam9x35ek] Tested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: at91sam9x5: TC blocks are also simple-mfd and syscon devicesAlexandre Belloni1-2/+6
Add simple-mfd and syscon to the TC blocks to allow to register one of the channels as clocksource properly at boot time and free up the remaining channels for other use. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: at91sam9n12ek: use TCB0 as timersAlexandre Belloni1-0/+12
Use tcb0 for timers as selected in at91_dt_defconfig. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: at91sam9n12: TC blocks are also simple-mfd and syscon devicesAlexandre Belloni1-2/+6
Add simple-mfd and syscon to the TC blocks to allow to register one of the channels as clocksource properly at boot time and free up the remaining channels for other use. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: at91sam9rlek: use TCB0 as timersAlexandre Belloni1-0/+12
Use tcb0 for timers as selected in at91_dt_defconfig. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: at91sam9rl: TC blocks are also simple-mfd and syscon devicesAlexandre Belloni1-1/+3
Add simple-mfd and syscon to the TC blocks to allow to register one of the channels as clocksource properly at boot time and free up the remaining channels for other use. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: pm9g45: use TCB0 as timersAlexandre Belloni1-0/+12
Use tcb0 for timers as selected in at91_dt_defconfig. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: at91sam9m10g45ek: use TCB0 as timersAlexandre Belloni1-0/+12
Use tcb0 for timers as selected in at91_dt_defconfig. Tested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: at91sam9g45: TC blocks are also simple-mfd and syscon devicesAlexandre Belloni1-2/+6
Add simple-mfd and syscon to the TC blocks to allow to register one of the channels as clocksource properly at boot time and free up the remaining channels for other use. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: calao: use TCB0 as timersAlexandre Belloni5-0/+60
Use tcb0 for timers as selected in at91_dt_defconfig. [tested on usb_a9g20 and usb_a9263] Tested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: at91sam9263ek: use TCB0 as timersAlexandre Belloni1-0/+12
Use tcb0 for timers as selected in at91_dt_defconfig. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: at91sam9263: TC blocks are also simple-mfd and syscon devicesAlexandre Belloni1-1/+3
Add simple-mfd and syscon to the TC blocks to allow to register one of the channels as clocksource properly at boot time and free up the remaining channels for other use. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: at91sam9261ek: use TCB0 as timersAlexandre Belloni1-0/+20
Use tcb0 for timers as selected in at91_dt_defconfig. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: at91sam9261: TC blocks are also simple-mfd and syscon devicesAlexandre Belloni1-1/+3
Add simple-mfd and syscon to the TC blocks to allow to register one of the channels as clocksource properly at boot time and free up the remaining channels for other use. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: ge863-pro3: use TCB0 as timersAlexandre Belloni1-0/+12
Use tcb0 for timers as selected in at91_dt_defconfig. Cc: Fabio Porcedda <fabio.porcedda@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: at91sam9g20ek: use TCB0 as timersAlexandre Belloni1-0/+12
Use tcb0 for timers as selected in at91_dt_defconfig. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: kizbox: use TCB0 as timersAlexandre Belloni1-0/+12
Use tcb0 for timers as selected in at91_dt_defconfig. Cc: Antoine Aubert <a.aubert@overkiz.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: animeo_ip: use TCB0 as timersAlexandre Belloni1-0/+12
Use tcb0 for timers as selected in at91_dt_defconfig. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: foxg20: use TCB0 as timersAlexandre Belloni1-0/+12
Use tcb0 for timers as selected in at91_dt_defconfig. Cc: Sergio Tanzilli <tanzilli@acmesystems.it> Cc: Douglas Gilbert <dgilbert@interlog.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: ethernut5: use TCB0 as timersAlexandre Belloni1-0/+12
Use tcb0 for timers as selected in at91_dt_defconfig. Cc: Martin Reimann <martin.reimann@egnite.de> Cc: Tim Schendekehl <tim.schendekehl@egnite.de> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: sam9_l9260: use TCB0 as timersAlexandre Belloni1-0/+12
Use tcb0 for timers as selected in at91_dt_defconfig. Cc: Raashid Muhammed <raashidmuhammed@zilogic.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: at91sam9260ek: use TCB0 as timersAlexandre Belloni1-0/+12
Use tcb0 for timers as selected in at91_dt_defconfig. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: at91sam9260: TC blocks are also simple-mfd and syscon devicesAlexandre Belloni1-2/+6
Add simple-mfd and syscon to the TC blocks to allow to register one of the channels as clocksource properly at boot time and free up the remaining channels for other use. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: mpa1600: use TCB0 as timersAlexandre Belloni1-0/+12
Use tcb0 for timers as selected in at91_dt_defconfig. Cc: Joachim Eastwood <manabian@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: at91rm9200ek: use TCB0 for timersAlexandre Belloni1-0/+12
Use tcb0 for timers like selected in at91_dt_defconfig. Tested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: at91rm9200: TC blocks are also simple-mfd and syscon devicesAlexandre Belloni1-2/+6
Add simple-mfd and syscon to the TC blocks to allow to register one of the channels as clocksource properly at boot time and free up the remaining channels for other use. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: at91: Document new TCB bindingsAlexandre Belloni2-32/+56
The current binding for the TCB is not flexible enough for some use cases and prevents proper utilization of all the channels. Acked-by: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: Remove leading 0x and 0s from bindings notationMathieu Malaterre9-9/+9
Improve the DTS files by removing all the leading "0x" and zeros to fix the following dtc warnings: Warning (unit_address_format): Node /XXX unit name should not have leading "0x" and Warning (unit_address_format): Node /XXX unit name should not have leading 0s Converted using the following command: find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C For simplicity, two sed expressions were used to solve each warnings separately. To make the regex expression more robust a few other issues were resolved, namely setting unit-address to lower case, and adding a whitespace before the the opening curly brace: https://elinux.org/Device_Tree_Linux#Linux_conventions This will solve as a side effect warning: Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>" This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation") Reported-by: David Daney <ddaney@caviumnetworks.com> Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: introduce the sama5d2 ptc ek boardLudovic Desroches2-0/+402
Add the official SAMA5D2 Peripheral Touch Controller Evaluation Kit board. Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-04ARM: dts: at91: add devicetree for the Axentia Nattis with Natte powerPeter Rosin5-0/+514
The Axentia Nattis is a device designed for presenting departures for public transport systems. The Natte helper board provides power and features a battery of battery chargers. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-04ARM: dts: at91: sama5d2: added dma property for ADC deviceEugen Hristev1-0/+2
Added DMA property for ADC device Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-11-26Linux 4.15-rc1Linus Torvalds1-2/+2
2017-11-26Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds6-6/+42
Pull ARM fixes from Russell King: - LPAE fixes for kernel-readonly regions - Fix for get_user_pages_fast on LPAE systems - avoid tying decompressor to a particular platform if DEBUG_LL is enabled - BUG if we attempt to return to userspace but the to-be-restored PSR value keeps us in privileged mode (defeating an issue that ftracetest found) * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: BUG if jumping to usermode address in kernel mode ARM: 8722/1: mm: make STRICT_KERNEL_RWX effective for LPAE ARM: 8721/1: mm: dump: check hardware RO bit for LPAE ARM: make decompressor debug output user selectable ARM: fix get_user_pages_fast
2017-11-26Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds12-15/+52
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Glexiner: - unbreak the irq trigger type check for legacy platforms - a handful fixes for ARM GIC v3/4 interrupt controllers - a few trivial fixes all over the place * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/matrix: Make - vs ?: Precedence explicit irqchip/imgpdc: Use resource_size function on resource object irqchip/qcom: Fix u32 comparison with value less than zero irqchip/exiu: Fix return value check in exiu_init() irqchip/gic-v3-its: Remove artificial dependency on PCI irqchip/gic-v4: Add forward definition of struct irq_domain_ops irqchip/gic-v3: pr_err() strings should end with newlines irqchip/s3c24xx: pr_err() strings should end with newlines irqchip/gic-v3: Fix ppi-partitions lookup irqchip/gic-v4: Clear IRQ_DISABLE_UNLAZY again if mapping fails genirq: Track whether the trigger type has been set
2017-11-26Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds38-616/+472
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull misc x86 fixes from Ingo Molnar: - topology enumeration fixes - KASAN fix - two entry fixes (not yet the big series related to KASLR) - remove obsolete code - instruction decoder fix - better /dev/mem sanity checks, hopefully working better this time - pkeys fixes - two ACPI fixes - 5-level paging related fixes - UMIP fixes that should make application visible faults more debuggable - boot fix for weird virtualization environment * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) x86/decoder: Add new TEST instruction pattern x86/PCI: Remove unused HyperTransport interrupt support x86/umip: Fix insn_get_code_seg_params()'s return value x86/boot/KASLR: Remove unused variable x86/entry/64: Add missing irqflags tracing to native_load_gs_index() x86/mm/kasan: Don't use vmemmap_populate() to initialize shadow x86/entry/64: Fix entry_SYSCALL_64_after_hwframe() IRQ tracing x86/pkeys/selftests: Fix protection keys write() warning x86/pkeys/selftests: Rename 'si_pkey' to 'siginfo_pkey' x86/mpx/selftests: Fix up weird arrays x86/pkeys: Update documentation about availability x86/umip: Print a warning into the syslog if UMIP-protected instructions are used x86/smpboot: Fix __max_logical_packages estimate x86/topology: Avoid wasting 128k for package id array perf/x86/intel/uncore: Cache logical pkg id in uncore driver x86/acpi: Reduce code duplication in mp_override_legacy_irq() x86/acpi: Handle SCI interrupts above legacy space gracefully x86/boot: Fix boot failure when SMP MP-table is based at 0 x86/mm: Limit mmap() of /dev/mem to valid physical addresses x86/selftests: Add test for mapping placement for 5-level paging ...
2017-11-26Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds3-10/+17
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "Misc fixes: a documentation fix, a Sparse warning fix and a debugging fix" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/debug: Fix task state recording/printout sched/deadline: Don't use dubious signed bitfields sched/deadline: Fix the description of runtime accounting in the documentation
2017-11-26Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds3-12/+32
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Misc fixes: two PMU driver fixes and a memory leak fix" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Fix memory leak triggered by perf --namespace perf/x86/intel/uncore: Add event constraint for BDX PCU perf/x86/intel: Hide TSX events when RTM is not supported
2017-11-26Merge branch 'locking-urgent-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull static key fix from Ingo Molnar: "Fix a boot warning related to bad init ordering of the static keys self-test" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: jump_label: Invoke jump_label_test() via early_initcall()
2017-11-26Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds15-40/+72
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fixes from Ingo Molnar: "A handful of objtool fixes, most of them related to making the UAPI header-syncing warnings easier to read and easier to act upon" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tools/headers: Sync objtool UAPI header objtool: Fix cross-build objtool: Move kernel headers/code sync check to a script objtool: Move synced files to their original relative locations objtool: Make unreachable annotation inline asms explicitly volatile objtool: Add a comment for the unreachable annotation macros
2017-11-26ARM: BUG if jumping to usermode address in kernel modeRussell King2-0/+24
Detect if we are returning to usermode via the normal kernel exit paths but the saved PSR value indicates that we are in kernel mode. This could occur due to corrupted stack state, which has been observed with "ftracetest". This ensures that we catch the problem case before we get to user code. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-11-25Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds351-1773/+1225
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: - The final conversion of timer wheel timers to timer_setup(). A few manual conversions and a large coccinelle assisted sweep and the removal of the old initialization mechanisms and the related code. - Remove the now unused VSYSCALL update code - Fix permissions of /proc/timer_list. I still need to get rid of that file completely - Rename a misnomed clocksource function and remove a stale declaration * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits) m68k/macboing: Fix missed timer callback assignment treewide: Remove TIMER_FUNC_TYPE and TIMER_DATA_TYPE casts timer: Remove redundant __setup_timer*() macros timer: Pass function down to initialization routines timer: Remove unused data arguments from macros timer: Switch callback prototype to take struct timer_list * argument timer: Pass timer_list pointer to callbacks unconditionally Coccinelle: Remove setup_timer.cocci timer: Remove setup_*timer() interface timer: Remove init_timer() interface treewide: setup_timer() -> timer_setup() (2 field) treewide: setup_timer() -> timer_setup() treewide: init_timer() -> setup_timer() treewide: Switch DEFINE_TIMER callbacks to struct timer_list * s390: cmm: Convert timers to use timer_setup() lightnvm: Convert timers to use timer_setup() drivers/net: cris: Convert timers to use timer_setup() drm/vc4: Convert timers to use timer_setup() block/laptop_mode: Convert timers to use timer_setup() net/atm/mpc: Avoid open-coded assignment of timer callback function ...
2017-11-25Merge tag 'arc-4.15-rc1' of ↵Linus Torvalds8-56/+136
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC updates from Vineet Gupta: - more changes for HS48 cores: supporting MMUv5, detecting new micro-arch gizmos - axs10x platform wiring up reset driver merged in this cycle - ARC perf driver optimizations * tag 'arc-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: perf: avoid vmalloc backed mmap ARCv2: perf: optimize given that num counters <= 32 ARCv2: perf: tweak overflow interrupt ARC: [plat-axs10x] DTS: Add reset controller node to manage ethernet reset ARCv2: boot log: updates for HS48: dual-issue, ECC, Loop Buffer ARCv2: Accomodate HS48 MMUv5 by relaxing MMU ver checking ARC: [plat-axs10x] auto-select AXS101 or AXS103 given the ISA config
2017-11-25Merge tag 'kbuild-v4.15-2' of ↵Linus Torvalds29-113/+58
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - use 'pwd' instead of '/bin/pwd' for portability - clean up Makefiles - fix ld-option for clang - fix malloc'ed data size in Kconfig - fix parallel building along with coccicheck - fix a minor issue of package building - prompt to use "rpm-pkg" instead of "rpm" - clean up *.i and *.lst patterns by "make clean" * tag 'kbuild-v4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: drop $(extra-y) from real-objs-y kbuild: clean up *.i and *.lst patterns by make clean kbuild: rpm: prompt to use "rpm-pkg" if "rpm" target is used kbuild: pkg: use --transform option to prefix paths in tar coccinelle: fix parallel build with CHECK=scripts/coccicheck kconfig/symbol.c: use correct pointer type argument for sizeof kbuild: Set KBUILD_CFLAGS before incl. arch Makefile kbuild: remove all dummy assignments to obj- kbuild: create built-in.o automatically if parent directory wants it kbuild: /bin/pwd -> pwd
2017-11-25Merge tag 'afs-fixes-20171124' of ↵Linus Torvalds8-279/+405
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull AFS fixes from David Howells: - Make AFS file locking work again. - Don't write to a page that's being written out, but wait for it to complete. - Do d_drop() and d_add() in the right places. - Put keys on error paths. - Remove some redundant code. * tag 'afs-fixes-20171124' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: afs: remove redundant assignment of dvnode to itself afs: cell: Remove unnecessary code in afs_lookup_cell afs: Fix signal handling in some file ops afs: Fix some dentry handling in dir ops and missing key_puts afs: Make afs_write_begin() avoid writing to a page that's being stored afs: Fix file locking
2017-11-24Merge tag 'kvm-4.15-2' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds19-158/+819
Pull KVM updates from Radim Krčmář: "Trimmed second batch of KVM changes for Linux 4.15: - GICv4 Support for KVM/ARM - re-introduce support for CPUs without virtual NMI (cc stable) and allow testing of KVM without virtual NMI on available CPUs - fix long-standing performance issues with assigned devices on AMD (cc stable)" * tag 'kvm-4.15-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (30 commits) kvm: vmx: Allow disabling virtual NMI support kvm: vmx: Reinstate support for CPUs without virtual NMI KVM: SVM: obey guest PAT KVM: arm/arm64: Don't queue VLPIs on INV/INVALL KVM: arm/arm64: Fix GICv4 ITS initialization issues KVM: arm/arm64: GICv4: Theory of operations KVM: arm/arm64: GICv4: Enable VLPI support KVM: arm/arm64: GICv4: Prevent userspace from changing doorbell affinity KVM: arm/arm64: GICv4: Prevent a VM using GICv4 from being saved KVM: arm/arm64: GICv4: Enable virtual cpuif if VLPIs can be delivered KVM: arm/arm64: GICv4: Hook vPE scheduling into vgic flush/sync KVM: arm/arm64: GICv4: Use the doorbell interrupt as an unblocking source KVM: arm/arm64: GICv4: Add doorbell interrupt handling KVM: arm/arm64: GICv4: Use pending_last as a scheduling hint KVM: arm/arm64: GICv4: Handle INVALL applied to a vPE KVM: arm/arm64: GICv4: Propagate property updates to VLPIs KVM: arm/arm64: GICv4: Handle MOVALL applied to a vPE KVM: arm/arm64: GICv4: Handle CLEAR applied to a VLPI KVM: arm/arm64: GICv4: Propagate affinity changes to the physical ITS KVM: arm/arm64: GICv4: Unmap VLPI when freeing an LPI ...
2017-11-24Merge tag 'powerpc-4.15-2' of ↵Linus Torvalds7-34/+66
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "A small batch of fixes, about 50% tagged for stable and the rest for recently merged code. There's one more fix for the >128T handling on hash. Once a process had requested a single mmap above 128T we would then always search above 128T. The correct behaviour is to consider the hint address in isolation for each mmap request. Then a couple of fixes for the IMC PMU, a missing EXPORT_SYMBOL in VAS, a fix for STRICT_KERNEL_RWX on 32-bit, and a fix to correctly identify P9 DD2.1 but in code that is currently not used by default. Thanks to: Aneesh Kumar K.V, Christophe Leroy, Madhavan Srinivasan, Sukadev Bhattiprolu" * tag 'powerpc-4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: Fix Power9 DD2.1 logic in DT CPU features powerpc/perf: Fix IMC_MAX_PMU macro powerpc/perf: Fix pmu_count to count only nest imc pmus powerpc: Fix boot on BOOK3S_32 with CONFIG_STRICT_KERNEL_RWX powerpc/perf/imc: Use cpu_to_node() not topology_physical_package_id() powerpc/vas: Export chip_to_vas_id() powerpc/64s/slice: Use addr limit when computing slice mask
Powered by cgit, Gruvboxed by Blaster4385.