aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-10-28Merge tag 'regmap-fix-v5.15-rc7' of ↵Linus Torvalds1-4/+3
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap fix from Mark Brown: "This fixes a potential double free when handling an out of memory error inserting a node into an rbtree regcache" * tag 'regmap-fix-v5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: Fix possible double-free in regcache_rbtree_exit()
2021-10-28Merge tag 'linux-watchdog-5.15-rc7' of ↵Linus Torvalds4-14/+11
git://www.linux-watchdog.org/linux-watchdog Pull watchdog fixes from Wim Van Sebroeck: "I overlooked Guenters request to sent this upstream earlier, so it's a bit late in the release cycle. This contains: - Revert "watchdog: iTCO_wdt: Account for rebooting on second timeout" - sbsa: only use 32-bit accessors - sbsa: drop unneeded MODULE_ALIAS - ixp4xx_wdt: Fix address space warning - Fix OMAP watchdog early handling" * tag 'linux-watchdog-5.15-rc7' of git://www.linux-watchdog.org/linux-watchdog: watchdog: Fix OMAP watchdog early handling watchdog: ixp4xx_wdt: Fix address space warning watchdog: sbsa: drop unneeded MODULE_ALIAS watchdog: sbsa: only use 32-bit accessors Revert "watchdog: iTCO_wdt: Account for rebooting on second timeout"
2021-10-28Merge tag 'trace-v5.15-rc6-2' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fix from Steven Rostedt: "Do not WARN when attaching event probe to non-existent event If the user tries to attach an event probe (eprobe) to an event that does not exist, it will trigger a warning. There's an error check that only expects memory issues otherwise it is considered a bug. But changes in the code to move around the locking made it that it can error out if the user attempts to attach to an event that does not exist, returning an -ENODEV. As this path can be caused by user space putting in a bad value, do not trigger a WARN" * tag 'trace-v5.15-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Do not warn when connecting eprobe to non existing event
2021-10-28Revert "net: hns3: fix pause config problem after autoneg disabled"Guangbin Huang5-57/+10
This reverts commit 3bda2e5df476417b6d08967e2d84234a59d57b1c. According to discussion with Andrew as follow: https://lore.kernel.org/netdev/[email protected]/ HNS3 driver needs to separate pause autoneg from general autoneg, so revert this incorrect patch. Signed-off-by: Guangbin Huang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-10-28mptcp: fix corrupt receiver key in MPC + data + checksumDavide Caratti2-15/+28
using packetdrill it's possible to observe that the receiver key contains random values when clients transmit MP_CAPABLE with data and checksum (as specified in RFC8684 §3.1). Fix the layout of mptcp_out_options, to avoid using the skb extension copy when writing the MP_CAPABLE sub-option. Fixes: d7b269083786 ("mptcp: shrink mptcp_out_options struct") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/233 Reported-by: Poorva Sonparote <[email protected]> Signed-off-by: Davide Caratti <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-10-28riscv, bpf: Fix potential NULL dereferenceBjörn Töpel1-1/+2
The bpf_jit_binary_free() function requires a non-NULL argument. When the RISC-V BPF JIT fails to converge in NR_JIT_ITERATIONS steps, jit_data->header will be NULL, which triggers a NULL dereference. Avoid this by checking the argument, prior calling the function. Fixes: ca6cb5447cec ("riscv, bpf: Factor common RISC-V JIT code") Signed-off-by: Björn Töpel <[email protected]> Acked-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-10-28net: virtio: use eth_hw_addr_set()Jakub Kicinski1-3/+7
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it go through appropriate helpers. Even though the current code uses dev->addr_len the we can switch to eth_hw_addr_set() instead of dev_addr_set(). The netdev is always allocated by alloc_etherdev_mq() and there are at least two places which assume Ethernet address: - the line below calling eth_hw_addr_random() - virtnet_set_mac_address() -> eth_commit_mac_addr_change() Acked-by: Michael S. Tsirkin <[email protected]> Acked-by: Jason Wang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-10-28KVM: x86: Take srcu lock in post_kvm_run_save()David Woodhouse1-0/+8
The Xen interrupt injection for event channels relies on accessing the guest's vcpu_info structure in __kvm_xen_has_interrupt(), through a gfn_to_hva_cache. This requires the srcu lock to be held, which is mostly the case except for this code path: [ 11.822877] WARNING: suspicious RCU usage [ 11.822965] ----------------------------- [ 11.823013] include/linux/kvm_host.h:664 suspicious rcu_dereference_check() usage! [ 11.823131] [ 11.823131] other info that might help us debug this: [ 11.823131] [ 11.823196] [ 11.823196] rcu_scheduler_active = 2, debug_locks = 1 [ 11.823253] 1 lock held by dom:0/90: [ 11.823292] #0: ffff998956ec8118 (&vcpu->mutex){+.+.}, at: kvm_vcpu_ioctl+0x85/0x680 [ 11.823379] [ 11.823379] stack backtrace: [ 11.823428] CPU: 2 PID: 90 Comm: dom:0 Kdump: loaded Not tainted 5.4.34+ #5 [ 11.823496] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 [ 11.823612] Call Trace: [ 11.823645] dump_stack+0x7a/0xa5 [ 11.823681] lockdep_rcu_suspicious+0xc5/0x100 [ 11.823726] __kvm_xen_has_interrupt+0x179/0x190 [ 11.823773] kvm_cpu_has_extint+0x6d/0x90 [ 11.823813] kvm_cpu_accept_dm_intr+0xd/0x40 [ 11.823853] kvm_vcpu_ready_for_interrupt_injection+0x20/0x30 < post_kvm_run_save() inlined here > [ 11.823906] kvm_arch_vcpu_ioctl_run+0x135/0x6a0 [ 11.823947] kvm_vcpu_ioctl+0x263/0x680 Fixes: 40da8ccd724f ("KVM: x86/xen: Add event channel interrupt vector upcall") Signed-off-by: David Woodhouse <[email protected]> Cc: [email protected] Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-10-28Merge tag 'nvme-5.16-2021-10-28' of git://git.infradead.org/nvme into ↵Jens Axboe6-12/+31
for-5.16/drivers Pull NVMe updates from Christoph: "nvme updates for Linux 5.16 - support the current discovery subsystem entry (Hannes Reinecke) - use flex_array_size and struct_size (Len Baker)" * tag 'nvme-5.16-2021-10-28' of git://git.infradead.org/nvme: nvmet: use flex_array_size and struct_size nvmet: register discovery subsystem as 'current' nvmet: switch check for subsystem type nvme: add new discovery log page entry definitions
2021-10-28Merge tag 'nvme-5.15-2021-10-28' of git://git.infradead.org/nvme into block-5.15Jens Axboe2-5/+11
Pull NVMe fixes from Christoph: "nvme fixe for Linux 5.15 - fix nvmet-tcp header digest verification (Amit Engel) - fix a memory leak in nvmet-tcp when releasing a queue (Maurizio Lombardi) - fix nvme-tcp H2CData PDU send accounting again (Sagi Grimberg) - fix digest pointer calculation in nvme-tcp and nvmet-tcp (Varun Prakash) - fix possible nvme-tcp req->offset corruption (Varun Prakash)" * tag 'nvme-5.15-2021-10-28' of git://git.infradead.org/nvme: nvmet-tcp: fix header digest verification nvmet-tcp: fix data digest pointer calculation nvme-tcp: fix data digest pointer calculation nvme-tcp: fix possible req->offset corruption nvme-tcp: fix H2CData PDU send accounting (again) nvmet-tcp: fix a memory leak when releasing a queue
2021-10-28devlink: Simplify internal devlink params implementationLeon Romanovsky1-123/+46
Reduce extra indirection from devlink_params_*() API. Such change makes it clear that we can drop devlink->lock from these flows, because everything is executed when the devlink is not registered yet. Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-28Merge branch 'octeontx2-debugfs-updates'David S. Miller3-11/+114
Rakesh Babu Saladi says: ==================== RVU Debugfs updates. Patch 1: Few minor changes such as spelling mistakes, deleting unwanted characters, etc. Patch 2: Add debugfs dump for lmtst map table Patch 3: Add channel and channel mask in debugfs. Changes made from v2 to v3: 1. In patch 1 moved few lines and submitted those changes as a different patch to net branch 2. Patch 2 is left unchanged. 3. Patch 3 is left unchanged. ==================== Signed-off-by: David S. Miller <[email protected]>
2021-10-28octeontx2-af: debugfs: Add channel and channel mask.Rakesh Babu3-0/+9
This patch is to dispaly channel and channel_mask for each RX interface of NPC MCAM rule. Signed-off-by: Rakesh Babu <[email protected]> Signed-off-by: Sunil Kovvuri Goutham <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-28octeontx2-af: cn10k: debugfs for dumping LMTST map tableHarman Kalra1-0/+94
CN10k SoCs use atomic stores of up to 128 bytes to submit packets/instructions into co-processor cores. The enqueueing is performed using Large Memory Transaction Store (LMTST) operations. They allow for lockless enqueue operations - i.e., two different CPU cores can submit instructions to the same queue without needing to lock the queue or synchronize their accesses. This patch implements a new debugfs entry for dumping LMTST map table present on CN10K, as this might be very useful to debug any issue in case of shared LMTST region among multiple pci functions. Signed-off-by: Harman Kalra <[email protected]> Signed-off-by: Bhaskara Budiredla <[email protected]> Signed-off-by: Rakesh Babu <[email protected]> Signed-off-by: Sunil Kovvuri Goutham <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-28octeontx2-af: debugfs: Minor changes.Rakesh Babu Saladi1-11/+11
Few changes in rvu_debugfs.c file to remove unwanted characters, indenting the code, added a new comment line etc. Signed-off-by: Rakesh Babu Saladi <[email protected]> Signed-off-by: Sunil Kovvuri Goutham <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-28Merge branch 'octeontx2-debugfs-fixes'David S. Miller2-33/+118
Rakesh Babu Saladi says: ==================== RVU Debugfs fix updates. The following patch series consists of the patch fixes done over rvu_debugfs.c and rvu_nix.c files. Patch 1: Check and return if ipolicers do not exists. Patch 2: Fix rsrc_alloc to print all enabled PF/VF entries with list of LFs allocated for each functional block. Patch 3: Fix possible null pointer dereference. ==================== Signed-off-by: David S. Miller <[email protected]>
2021-10-28octeontx2-af: Fix possible null pointer dereference.Rakesh Babu Saladi2-1/+4
This patch fixes possible null pointer dereference in files "rvu_debugfs.c" and "rvu_nix.c" Fixes: 8756828a8148 ("octeontx2-af: Add NPA aura and pool contexts to debugfs") Fixes: 9a946def264d ("octeontx2-af: Modify nix_vtag_cfg mailbox to support TX VTAG entries") Signed-off-by: Rakesh Babu Saladi <[email protected]> Signed-off-by: Subbaraya Sundeep <[email protected]> Signed-off-by: Sunil Goutham <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-28octeontx2-af: Display all enabled PF VF rsrc_alloc entries.Rakesh Babu1-32/+106
Currently, we are using a fixed buffer size of length 2048 to display rsrc_alloc output. As a result a maximum of 2048 characters of rsrc_alloc output is displayed, which may lead sometimes to display only partial output. This patch fixes this dependency on max limit of buffer size and displays all PF VF entries. Each column of the debugfs entry "rsrc_alloc" uses a fixed width of 12 characters to print the list of LFs of each block for a PF/VF. If the length of list of LFs of a block exceeds this fixed width then the list gets truncated and displays only a part of the list. This patch fixes this by using the maximum possible length of list of LFs among all blocks of all PFs and VFs entries as the width size. Fixes: f7884097141b ("octeontx2-af: Formatting debugfs entry rsrc_alloc.") Fixes: 23205e6d06d4 ("octeontx2-af: Dump current resource provisioning status") Signed-off-by: Rakesh Babu <[email protected]> Signed-off-by: Nithin Dabilpuram <[email protected]> Signed-off-by: Sunil Kovvuri Goutham <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-28octeontx2-af: Check whether ipolicers existsSubbaraya Sundeep1-0/+8
While displaying ingress policers information in debugfs check whether ingress policers exist in the hardware or not because some platforms(CN9XXX) do not have this feature. Fixes: e7d8971763f3 ("octeontx2-af: cn10k: Debugfs support for bandwidth") Signed-off-by: Subbaraya Sundeep <[email protected]> Signed-off-by: Rakesh Babu <[email protected]> Signed-off-by: Sunil Kovvuri Goutham <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-28net: ethernet: microchip: lan743x: Fix skb allocation failureYuiko Oshino1-4/+9
The driver allocates skb during ndo_open with GFP_ATOMIC which has high chance of failure when there are multiple instances. GFP_KERNEL is enough while open and use GFP_ATOMIC only from interrupt context. Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Yuiko Oshino <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-28net: phy: microchip_t1: add cable test support for lan87xx phyYuiko Oshino1-0/+239
Add a basic cable test (diagnostic) support for lan87xx phy. Tested with LAN8770 for connected/open/short wires using ethtool. Signed-off-by: Yuiko Oshino <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-28ptp: fix code indentation issuesCarlos Llamas1-3/+3
This fixes the following checkpatch.pl errors: ERROR: code indent should use tabs where possible +^I if (ptp->pps_source)$ ERROR: code indent should use tabs where possible +^I pps_unregister_source(ptp->pps_source);$ ERROR: code indent should use tabs where possible +^I kthread_destroy_worker(ptp->kworker);$ Fixes: 4225fea1cb28 ("ptp: Fix possible memory leak in ptp_clock_register()") Signed-off-by: Carlos Llamas <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-28net/tls: Fix flipped sign in async_wait.err assignmentDaniel Jordan1-1/+1
sk->sk_err contains a positive number, yet async_wait.err wants the opposite. Fix the missed sign flip, which Jakub caught by inspection. Fixes: a42055e8d2c3 ("net/tls: Add support for async encryption of records for performance") Suggested-by: Jakub Kicinski <[email protected]> Signed-off-by: Daniel Jordan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-28net/tls: Fix flipped sign in tls_err_abort() callsDaniel Jordan2-11/+15
sk->sk_err appears to expect a positive value, a convention that ktls doesn't always follow and that leads to memory corruption in other code. For instance, [kworker] tls_encrypt_done(..., err=<negative error from crypto request>) tls_err_abort(.., err) sk->sk_err = err; [task] splice_from_pipe_feed ... tls_sw_do_sendpage if (sk->sk_err) { ret = -sk->sk_err; // ret is positive splice_from_pipe_feed (continued) ret = actor(...) // ret is still positive and interpreted as bytes // written, resulting in underflow of buf->len and // sd->len, leading to huge buf->offset and bogus // addresses computed in later calls to actor() Fix all tls_err_abort() callers to pass a negative error code consistently and centralize the error-prone sign flip there, throwing in a warning to catch future misuse and uninlining the function so it really does only warn once. Cc: [email protected] Fixes: c46234ebb4d1e ("tls: RX path for ktls") Reported-by: [email protected] Signed-off-by: Daniel Jordan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-28net: cleanup __sk_stream_memory_free()Eric Dumazet1-8/+2
We now have INDIRECT_CALL_INET_1() macro, no need to use #ifdef CONFIG_INET Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-28sky2: Remove redundant assignment and parenthesesluo penghao1-1/+1
The variable err will be reassigned on subsequent branches, and this assignment does not perform related value operations. This will cause the double parentheses to be redundant, so the inner parentheses should be deleted. clang_analyzer complains as follows: drivers/net/ethernet/marvell/sky2.c:4988: warning: Although the value stored to 'err' is used in the enclosing expression, the value is never actually read from 'err'. Changes in v2: modify title category:octeontx2-af to sky2. delete the inner parentheses. Reported-by: Zeal Robot <[email protected]> Signed-off-by: luo penghao <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-28net: ipconfig: Release the rtnl_lock while waiting for carrierMaxime Chevallier1-2/+10
While waiting for a carrier to come on one of the netdevices, some devices will require to take the rtnl lock at some point to fully initialize all parts of the link. That's the case for SFP, where the rtnl is taken when a module gets detected. This prevents mounting an NFS rootfs over an SFP link. This means that while ipconfig waits for carriers to be detected, no SFP modules can be detected in the meantime, it's only detected after ipconfig times out. This commit releases the rtnl_lock while waiting for the carrier to come up, and re-takes it to check the for the init device and carrier status. Signed-off-by: Maxime Chevallier <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-28devlink: add documentation for octeontx2 driverSubbaraya Sundeep2-0/+43
Add a file to document devlink support for octeontx2 driver. Driver-specific parameters implemented by AF, PF and VF drivers are documented. Signed-off-by: Subbaraya Sundeep <[email protected]> Signed-off-by: Sunil Goutham <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-28sch_htb: Add extack messages for EOPNOTSUPP errorsMaxim Mikityanskiy1-2/+6
In order to make the "Operation not supported" message clearer to the user, add extack messages explaining why exactly adding offloaded HTB could be not supported in each case. Signed-off-by: Maxim Mikityanskiy <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-28Merge tag 'iwlwifi-next-for-kalle-2021-10-28' of ↵Kalle Valo26-401/+804
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next iwlwifi patches for v5.16 * Support a new ACPI table revision; * Improvements in the device selection code; * New HW support; * Some fixes in the Geographic SAR implementation; * Support for WiFi 6E enablement via BIOS; * Support FW API version 67; * Improve debugging support; * Some fixes in session protection; * Some other small fixes, clean-ups and improvements. # gpg: Signature made Thu 28 Oct 2021 12:11:27 PM EEST # gpg: using RSA key 1772CD7E06F604F5A6EBCB26A1479CA21A3CC5FA # gpg: Good signature from "Luciano Roth Coelho (Luca) <[email protected]>" [full] # gpg: aka "Luciano Roth Coelho (Intel) <[email protected]>" [full]
2021-10-28mwifiex: fix division by zero in fw download pathJohan Hovold1-0/+16
Add the missing endpoint sanity checks to probe() to avoid division by zero in mwifiex_write_data_sync() in case a malicious device has broken descriptors (or when doing descriptor fuzz testing). Only add checks for the firmware-download boot stage, which require both command endpoints, for now. The driver looks like it will handle a missing endpoint during normal operation without oopsing, albeit not very gracefully as it will try to submit URBs to the default pipe and fail. Note that USB core will reject URBs submitted for endpoints with zero wMaxPacketSize but that drivers doing packet-size calculations still need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip endpoint descriptors with maxpacket=0")). Fixes: 4daffe354366 ("mwifiex: add support for Marvell USB8797 chipset") Cc: [email protected] # 3.5 Cc: Amitkumar Karwar <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Reviewed-by: Brian Norris <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-10-28rsi: fix control-message timeoutJohan Hovold1-1/+1
USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Use the common control-message timeout define for the five-second timeout. Fixes: dad0d04fa7ba ("rsi: Add RS9113 wireless driver") Cc: [email protected] # 3.15 Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-10-28rtl8187: fix control-message timeoutsJohan Hovold1-7/+7
USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: 605bebe23bf6 ("[PATCH] Add rtl8187 wireless driver") Cc: [email protected] # 2.6.23 Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-10-28Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo21-100/+403
ath.git patches for v5.16. Major changes: ath11k * fix QCA6390 A-MSDU handling (CVE-2020-24588) wcn36xx * enable hardware scan offload for 5Ghz band * add missing 5GHz channels 136 and 144
2021-10-28Documentation/x86: Add documentation for using dynamic XSTATE featuresChang S. Bae2-0/+66
Explain how dynamic XSTATE features can be enabled via the architecture-specific prctl() along with dynamic sigframe size and first use trap handling. Fix: Documentation/x86/xstate.rst:15: WARNING: Title underline too short. as reported by Stephen Rothwell <[email protected]> Originally-by: Thomas Gleixner <[email protected]> Signed-off-by: Chang S. Bae <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2021-10-28x86/fpu: Include vmalloc.h for vzalloc()Stephen Rothwell1-0/+1
Explicitly include that header to avoid build errors when vzalloc() becomes "invisible" to the compiler due to header reorganizations. This is not a problem in the tip tree but occurred when integrating linux-next. [ bp: Commit message. ] Link: https://lore.kernel.org/r/[email protected] Fixes: 69f6ed1d14c6 ("x86/fpu: Provide infrastructure for KVM FPU cleanup") Signed-off-by: Stephen Rothwell <[email protected]> Signed-off-by: Borislav Petkov <[email protected]>
2021-10-28selftests/x86/amx: Add context switch testChang S. Bae1-3/+157
XSAVE state is thread-local. The kernel switches between thread state at context switch time. Generally, running a selftest for a while will naturally expose it to some context switching and and will test the XSAVE code. Instead of just hoping that the tests get context-switched at random times, force context-switches on purpose. Spawn off a few userspace threads and force context-switches between them. Ensure that the kernel correctly context switches each thread's unique AMX state. [ dhansen: bunches of cleanups ] Signed-off-by: Chang S. Bae <[email protected]> Signed-off-by: Dave Hansen <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2021-10-28selftests/x86/amx: Add test cases for AMX state managementChang S. Bae2-1/+698
AMX TILEDATA is a very large XSAVE feature. It could have caused nasty XSAVE buffer space waste in two places: * Signal stacks * Kernel task_struct->fpu buffers To avoid this waste, neither of these buffers have AMX state by default. The non-default features are called "dynamic" features. There is an arch_prctl(ARCH_REQ_XCOMP_PERM) which allows a task to declare that it wants to use AMX or other "dynamic" XSAVE features. This arch_prctl() ensures that sufficient sigaltstack space is available before it will succeed. It also expands the task_struct buffer. Functions of this test: * Test arch_prctl(ARCH_REQ_XCOMP_PERM). Ensure that it checks for proper sigaltstack sizing and that the sizing is enforced for future sigaltstack calls. * Ensure that ARCH_REQ_XCOMP_PERM is inherited across fork() * Ensure that TILEDATA use before the prctl() is fatal * Ensure that TILEDATA is cleared across fork() Note: Generally, compiler support is needed to do something with AMX. Instead, directly load AMX state from userspace with a plain XSAVE. Do not depend on the compiler. [ dhansen: bunches of cleanups ] Signed-off-by: Chang S. Bae <[email protected]> Signed-off-by: Dave Hansen <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2021-10-28Merge branch irq/irq_cpu_offline into irq/irqchip-nextMarc Zyngier5-13/+39
* irq/irq_cpu_offline: : . : Make irq_cpu_{on,off}line() deprecated kernel API, and only : enable it for some obscure Cavium platform after having : moved all the other users away from it. : : Next step, drop the platform itself. : . genirq: Hide irq_cpu_{on,off}line() behind a deprecated option irqchip/mips-gic: Get rid of the reliance on irq_cpu_online() MIPS: loongson64: Drop call to irq_cpu_offline() Signed-off-by: Marc Zyngier <[email protected]>
2021-10-28Merge branch irq/remove-handle-domain-irq-20211026 into irq/irqchip-nextMarc Zyngier67-221/+192
* irq/remove-handle-domain-irq-20211026: : Large rework of the architecture entry code from Mark Rutland. : From the cover letter: : : <quote> : The handle_domain_{irq,nmi}() functions were oringally intended as a : convenience, but recent rework to entry code across the kernel tree has : demonstrated that they cause more pain than they're worth and prevent : architectures from being able to write robust entry code. : : This series reworks the irq code to remove them, handling the necessary : entry work consistently in entry code (be it architectural or generic). : </quote> MIPS: irq: Avoid an unused-variable error irq: remove handle_domain_{irq,nmi}() irq: remove CONFIG_HANDLE_DOMAIN_IRQ_IRQENTRY irq: riscv: perform irqentry in entry code irq: openrisc: perform irqentry in entry code irq: csky: perform irqentry in entry code irq: arm64: perform irqentry in entry code irq: arm: perform irqentry in entry code irq: add a (temporary) CONFIG_HANDLE_DOMAIN_IRQ_IRQENTRY irq: nds32: avoid CONFIG_HANDLE_DOMAIN_IRQ irq: arc: avoid CONFIG_HANDLE_DOMAIN_IRQ irq: add generic_handle_arch_irq() irq: unexport handle_irq_desc() irq: simplify handle_domain_{irq,nmi}() irq: mips: simplify do_domain_IRQ() irq: mips: stop (ab)using handle_domain_irq() irq: mips: simplify bcm6345_l1_irq_handle() irq: mips: avoid nested irq_enter() Signed-off-by: Marc Zyngier <[email protected]>
2021-10-28dt-bindings: irqchip: renesas-irqc: Document r8a774e1 bindingsMarian-Cristian Rotariu1-0/+1
Document SoC specific bindings for RZ/G2H (r8a774e1) SoC. Signed-off-by: Marian-Cristian Rotariu <[email protected]> Signed-off-by: Lad Prabhakar <[email protected]> Acked-by: Rob Herring <[email protected]> Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/53317ce1bdd1d5e517122eb5c8ea0ccaa69eba3b.1635337428.git.geert+renesas@glider.be
2021-10-28MIPS: irq: Avoid an unused-variable errorYanteng Si1-2/+0
When CONFIG_IRQ_DOMAIN is set, there is a warning: arch/mips/kernel/irq.c:114:19: error: unused variable 'desc' [-Werror=unused-variable] 114 | struct irq_desc *desc; | ^~~~ This variable is unused, let's remove it. Signed-off-by: Yanteng Si <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-10-28Merge branch 'SMC-fixes'David S. Miller2-2/+2
Tony Lu says: ==================== Fixes for SMC There are some fixes for SMC. v1->v2: - fix wrong email address. ==================== Signed-off-by: David S. Miller <[email protected]>
2021-10-28net/smc: Correct spelling mistake to TCPF_SYN_RECVWen Gu1-1/+1
There should use TCPF_SYN_RECV instead of TCP_SYN_RECV. Signed-off-by: Wen Gu <[email protected]> Reviewed-by: Tony Lu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-28net/smc: Fix smc_link->llc_testlink_time overflowTony Lu1-1/+1
The value of llc_testlink_time is set to the value stored in net->ipv4.sysctl_tcp_keepalive_time when linkgroup init. The value of sysctl_tcp_keepalive_time is already jiffies, so we don't need to multiply by HZ, which would cause smc_link->llc_testlink_time overflow, and test_link send flood. Signed-off-by: Tony Lu <[email protected]> Reviewed-by: Xuan Zhuo <[email protected]> Reviewed-by: Wen Gu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-28Merge tag 'mlx5-net-next-5.15-rc7' of ↵David S. Miller34-248/+292
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Merge mlx5-next into net-next ==================== Signed-off-by: David S. Miller <[email protected]>
2021-10-28nfp: bpf: relax prog rejection for mtu check through max_pkt_offsetYu Xiao3-9/+26
MTU change is refused whenever the value of new MTU is bigger than the max packet bytes that fits in NFP Cluster Target Memory (CTM). However, an eBPF program doesn't always need to access the whole packet data. The maximum direct packet access (DPA) offset has always been caculated by verifier and stored in the max_pkt_offset field of prog aux data. Signed-off-by: Yu Xiao <[email protected]> Reviewed-by: Yinjun Zhang <[email protected]> Reviewed-by: Niklas Soderlund <[email protected]> Signed-off-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-28Merge branch 'mvpp2-phylink'David S. Miller1-45/+52
Russell King says: ==================== Convert mvpp2 to phylink supported_interfaces This patch series converts mvpp2 to use phylinks supported_interfaces bitmap to simplify the validate() implementation. The patches: 1) Add the supported interface modes the supported_interfaces bitmap. 2) Removes the checks for the interface type being supported from the validate callback 3) Removes the now unnecessary checks and call to phylink_helper_basex_speed() to support switching between 1000base-X and 2500base-X for SFPs 4) Cleans up the resulting validate() code. (3) becomes possible because when asking the MAC for its complete support, we walk all supported interfaces which will include 1000base-X and 2500base-X only if the comphy is present. ==================== Signed-off-by: David S. Miller <[email protected]>
2021-10-28net: mvpp2: clean up mvpp2_phylink_validate()Russell King (Oracle)1-10/+7
mvpp2_phylink_validate() no longer needs to check for PHY_INTERFACE_MODE_NA as phylink will walk the supported interface types to discover the link mode capabilities. Remove these checks. Signed-off-by: Russell King (Oracle) <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-28net: mvpp2: drop use of phylink_helper_basex_speed()Russell King (Oracle)1-12/+7
Now that we have a better method to select SFP interface modes, we no longer need to use phylink_helper_basex_speed() in a driver's validation function, and we can also get rid of our hack to indicate both 1000base-X and 2500base-X if the comphy is present to make that work. Remove this hack and use of phylink_helper_basex_speed(). Signed-off-by: Russell King (Oracle) <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.