| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Disable preemption on -RT for the vmstat code. On vanila the code runs in
IRQ-off regions while on -RT it may not when stats are updated under a
local_lock. "preempt_disable" ensures that the same resources is not
updated in parallel due to preemption.
This patch differs from the preempt-rt version where __count_vm_event and
__count_vm_events are also protected. The counters are explicitly
"allowed to be to be racy" so there is no need to protect them from
preemption. Only the accurate page stats that are updated by a
read-modify-write need protection. This patch also differs in that a
preempt_[en|dis]able_rt helper is not used. As vmstat is the only user of
the helper, it was suggested that it be open-coded in vmstat.c instead of
risking the helper being used in unnecessary contexts.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Mel Gorman <[email protected]>
Acked-by: Vlastimil Babka <[email protected]>
Cc: Hugh Dickins <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Addresses-Coverity reported Control flow issues in sid_to_id()
/fs/ksmbd/smbacl.c: 277 in sid_to_id()
271
272 if (sidtype == SIDOWNER) {
273 kuid_t uid;
274 uid_t id;
275
276 id = le32_to_cpu(psid->sub_auth[psid->num_subauth - 1]);
>>> CID 1506810: Control flow issues (NO_EFFECT)
>>> This greater-than-or-equal-to-zero comparison of an unsigned value
>>> is always true. "id >= 0U".
277 if (id >= 0) {
278 /*
279 * Translate raw sid into kuid in the server's user
280 * namespace.
281 */
282 uid = make_kuid(&init_user_ns, id);
Addresses-Coverity: ("Control flow issues")
Signed-off-by: Namjae Jeon <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
Addresses-Coverity reported Uninitialized variables warninig :
/fs/ksmbd/smb2pdu.c: 5525 in set_file_basic_info()
5519 if (!rc) {
5520 inode->i_ctime = ctime;
5521 mark_inode_dirty(inode);
5522 }
5523 inode_unlock(inode);
5524 }
>>> CID 1506805: Uninitialized variables (UNINIT)
>>> Using uninitialized value "rc".
5525 return rc;
5526 }
5527
5528 static int set_file_allocation_info(struct ksmbd_work *work,
5529 struct ksmbd_file *fp, char *buf)
5530 {
Addresses-Coverity: ("Uninitialized variable")
Signed-off-by: Namjae Jeon <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
Currently there are two ndr_read_int64 calls where ret is being checked
for failure but ret is not being assigned a return value from the call.
Static analyis is reporting the checks on ret as dead code. Fix this.
Addresses-Coverity: ("Logical dead code")
Reviewed-by: Sergey Senozhatsky <[email protected]>
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Namjae Jeon <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
In case of !SQPOLL, io_cqring_ev_posted_iopoll() doesn't provide a
memory barrier required by waitqueue_active(&ctx->poll_wait). There is
a wq_has_sleeper(), which does smb_mb() inside, but it's called only for
SQPOLL.
Fixes: 5fd4617840596 ("io_uring: be smarter about waking multiple CQ ring waiters")
Signed-off-by: Pavel Begunkov <[email protected]>
Link: https://lore.kernel.org/r/2982e53bcea2274006ed435ee2a77197107d8a29.1631130542.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <[email protected]>
|
|
Merge more updates from Andrew Morton:
"147 patches, based on 7d2a07b769330c34b4deabeed939325c77a7ec2f.
Subsystems affected by this patch series: mm (memory-hotplug, rmap,
ioremap, highmem, cleanups, secretmem, kfence, damon, and vmscan),
alpha, percpu, procfs, misc, core-kernel, MAINTAINERS, lib,
checkpatch, epoll, init, nilfs2, coredump, fork, pids, criu, kconfig,
selftests, ipc, and scripts"
* emailed patches from Andrew Morton <[email protected]>: (94 commits)
scripts: check_extable: fix typo in user error message
mm/workingset: correct kernel-doc notations
ipc: replace costly bailout check in sysvipc_find_ipc()
selftests/memfd: remove unused variable
Kconfig.debug: drop selecting non-existing HARDLOCKUP_DETECTOR_ARCH
configs: remove the obsolete CONFIG_INPUT_POLLDEV
prctl: allow to setup brk for et_dyn executables
pid: cleanup the stale comment mentioning pidmap_init().
kernel/fork.c: unexport get_{mm,task}_exe_file
coredump: fix memleak in dump_vma_snapshot()
fs/coredump.c: log if a core dump is aborted due to changed file permissions
nilfs2: use refcount_dec_and_lock() to fix potential UAF
nilfs2: fix memory leak in nilfs_sysfs_delete_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_create_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_delete_##name##_group
nilfs2: fix memory leak in nilfs_sysfs_create_##name##_group
nilfs2: fix NULL pointer in nilfs_##name##_attr_release
nilfs2: fix memory leak in nilfs_sysfs_create_device_group
trap: cleanup trap_init()
init: move usermodehelper_enable() to populate_rootfs()
...
|
|
Since the commit e5efaeb8a8f5 ("bootconfig: Support mixing
a value and subkeys under a key") allows to co-exist a value
node and key nodes under a node, xbc_node_for_each_child()
is not only returning key node but also a value node.
In the boot-time tracing using xbc_node_for_each_child() to
iterate the events, groups and instances, but those must be
key nodes. Thus it must use xbc_node_for_each_subkey().
Link: https://lkml.kernel.org/r/163112988361.74896.2267026262061819145.stgit@devnote2
Fixes: e5efaeb8a8f5 ("bootconfig: Support mixing a value and subkeys under a key")
Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/linux
Pull SLUB updates from Vlastimil Babka:
"SLUB: reduce irq disabled scope and make it RT compatible
This series was initially inspired by Mel's pcplist local_lock
rewrite, and also interest to better understand SLUB's locking and the
new primitives and RT variants and implications. It makes SLUB
compatible with PREEMPT_RT and generally more preemption-friendly,
apparently without significant regressions, as the fast paths are not
affected.
The main changes to SLUB by this series:
- irq disabling is now only done for minimum amount of time needed to
protect the strict kmem_cache_cpu fields, and as part of spin lock,
local lock and bit lock operations to make them irq-safe
- SLUB is fully PREEMPT_RT compatible
The series should now be sufficiently tested in both RT and !RT
configs, mainly thanks to Mike.
The RFC/v1 version also got basic performance screening by Mel that
didn't show major regressions. Mike's testing with hackbench of v2 on
!RT reported negligible differences [6]:
virgin(ish) tip
5.13.0.g60ab3ed-tip
7,320.67 msec task-clock # 7.792 CPUs utilized ( +- 0.31% )
221,215 context-switches # 0.030 M/sec ( +- 3.97% )
16,234 cpu-migrations # 0.002 M/sec ( +- 4.07% )
13,233 page-faults # 0.002 M/sec ( +- 0.91% )
27,592,205,252 cycles # 3.769 GHz ( +- 0.32% )
8,309,495,040 instructions # 0.30 insn per cycle ( +- 0.37% )
1,555,210,607 branches # 212.441 M/sec ( +- 0.42% )
5,484,209 branch-misses # 0.35% of all branches ( +- 2.13% )
0.93949 +- 0.00423 seconds time elapsed ( +- 0.45% )
0.94608 +- 0.00384 seconds time elapsed ( +- 0.41% ) (repeat)
0.94422 +- 0.00410 seconds time elapsed ( +- 0.43% )
5.13.0.g60ab3ed-tip +slub-local-lock-v2r3
7,343.57 msec task-clock # 7.776 CPUs utilized ( +- 0.44% )
223,044 context-switches # 0.030 M/sec ( +- 3.02% )
16,057 cpu-migrations # 0.002 M/sec ( +- 4.03% )
13,164 page-faults # 0.002 M/sec ( +- 0.97% )
27,684,906,017 cycles # 3.770 GHz ( +- 0.45% )
8,323,273,871 instructions # 0.30 insn per cycle ( +- 0.28% )
1,556,106,680 branches # 211.901 M/sec ( +- 0.31% )
5,463,468 branch-misses # 0.35% of all branches ( +- 1.33% )
0.94440 +- 0.00352 seconds time elapsed ( +- 0.37% )
0.94830 +- 0.00228 seconds time elapsed ( +- 0.24% ) (repeat)
0.93813 +- 0.00440 seconds time elapsed ( +- 0.47% ) (repeat)
RT configs showed some throughput regressions, but that's expected
tradeoff for the preemption improvements through the RT mutex. It
didn't prevent the v2 to be incorporated to the 5.13 RT tree [7],
leading to testing exposure and bugfixes.
Before the series, SLUB is lockless in both allocation and free fast
paths, but elsewhere, it's disabling irqs for considerable periods of
time - especially in allocation slowpath and the bulk allocation,
where IRQs are re-enabled only when a new page from the page allocator
is needed, and the context allows blocking. The irq disabled sections
can then include deactivate_slab() which walks a full freelist and
frees the slab back to page allocator or unfreeze_partials() going
through a list of percpu partial slabs. The RT tree currently has some
patches mitigating these, but we can do much better in mainline too.
Patches 1-6 are straightforward improvements or cleanups that could
exist outside of this series too, but are prerequsities.
Patches 7-9 are also preparatory code changes without functional
changes, but not so useful without the rest of the series.
Patch 10 simplifies the fast paths on systems with preemption, based
on (hopefully correct) observation that the current loops to verify
tid are unnecessary.
Patches 11-20 focus on reducing irq disabled scope in the allocation
slowpath:
- patch 11 moves disabling of irqs into ___slab_alloc() from its
callers, which are the allocation slowpath, and bulk allocation.
Instead these callers only disable preemption to stabilize the cpu.
- The following patches then gradually reduce the scope of disabled
irqs in ___slab_alloc() and the functions called from there. As of
patch 14, the re-enabling of irqs based on gfp flags before calling
the page allocator is removed from allocate_slab(). As of patch 17,
it's possible to reach the page allocator (in case of existing
slabs depleted) without disabling and re-enabling irqs a single
time.
Pathces 21-26 reduce the scope of disabled irqs in functions related
to unfreezing percpu partial slab.
Patch 27 is preparatory. Patch 28 is adopted from the RT tree and
converts the flushing of percpu slabs on all cpus from using IPI to
workqueue, so that the processing isn't happening with irqs disabled
in the IPI handler. The flushing is not performance critical so it
should be acceptable.
Patch 29 also comes from RT tree and makes object_map_lock RT
compatible.
Patch 30 make slab_lock irq-safe on RT where we cannot rely on having
irq disabled from the list_lock spin lock usage.
Patch 31 changes kmem_cache_cpu->partial handling in put_cpu_partial()
from cmpxchg loop to a short irq disabled section, which is used by
all other code modifying the field. This addresses a theoretical race
scenario pointed out by Jann, and makes the critical section safe wrt
with RT local_lock semantics after the conversion in patch 35.
Patch 32 changes preempt disable to migrate disable, so that the
nested list_lock spinlock is safe to take on RT. Because
migrate_disable() is a function call even on !RT, a small set of
private wrappers is introduced to keep using the cheaper
preempt_disable() on !PREEMPT_RT configurations. As of this patch,
SLUB should be already compatible with RT's lock semantics.
Finally, patch 33 changes irq disabled sections that protect
kmem_cache_cpu fields in the slow paths, with a local lock. However on
PREEMPT_RT it means the lockless fast paths can now preempt slow paths
which don't expect that, so the local lock has to be taken also in the
fast paths and they are no longer lockless. RT folks seem to not mind
this tradeoff. The patch also updates the locking documentation in the
file's comment"
Mike Galbraith and Mel Gorman verified that their earlier testing
observations still hold for the final series:
Link: https://lore.kernel.org/lkml/[email protected]/
Link: https://lore.kernel.org/lkml/[email protected]/
* tag 'mm-slub-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/linux: (33 commits)
mm, slub: convert kmem_cpu_slab protection to local_lock
mm, slub: use migrate_disable() on PREEMPT_RT
mm, slub: protect put_cpu_partial() with disabled irqs instead of cmpxchg
mm, slub: make slab_lock() disable irqs with PREEMPT_RT
mm: slub: make object_map_lock a raw_spinlock_t
mm: slub: move flush_cpu_slab() invocations __free_slab() invocations out of IRQ context
mm, slab: split out the cpu offline variant of flush_slab()
mm, slub: don't disable irqs in slub_cpu_dead()
mm, slub: only disable irq with spin_lock in __unfreeze_partials()
mm, slub: separate detaching of partial list in unfreeze_partials() from unfreezing
mm, slub: detach whole partial list at once in unfreeze_partials()
mm, slub: discard slabs in unfreeze_partials() without irqs disabled
mm, slub: move irq control into unfreeze_partials()
mm, slub: call deactivate_slab() without disabling irqs
mm, slub: make locking in deactivate_slab() irq-safe
mm, slub: move reset of c->page and freelist out of deactivate_slab()
mm, slub: stop disabling irqs around get_partial()
mm, slub: check new pages with restored irqs
mm, slub: validate slab from partial list or page allocator before making it cpu slab
mm, slub: restore irqs around calling new_slab()
...
|
|
The original test for adding and removing eprobes used synthetic events
and retrieved the filename from the open system call at the end of the
system call. This would allow it to always be loaded into the page tables
when accessed.
Masami suggested that the test was too complex for just testing add and
remove, so it was changed to test just adding and removing an event probe
on top of the start of the open system call event. Now it is possible that
the filename will not be loaded into memory at the time the eprobe is
triggered, and will result in "(fault)" being displayed in the event. This
causes the test to fail.
Account for "(fault)" also being one of the values of the filename field
of the event probe.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 079db70794ec5 ("selftests/ftrace: Add test case to test adding and removing of event probe")
Acked-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
Setting the hist_elt_data.field_var_str[] array unconditionally to a
size of SYNTH_FIELD_MAX elements wastes space unnecessarily. The
actual number of elements needed can be calculated at run-time
instead.
In most cases, this will save a lot of space since it's a per-elt
array which isn't normally close to being full. It also allows us to
increase SYNTH_FIELD_MAX without worrying about even more wastage when
we do that.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Tom Zanussi <[email protected]>
Tested-by: Artem Bityutskiy <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
Sometimes it is useful to construct larger synthetic trace events. Increase
'SYNTH_FIELDS_MAX' (maximum number of fields in a synthetic event) from 32 to
64.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Artem Bityutskiy <[email protected]>
Acked-by: Tom Zanussi <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
Show whole test command instead of only the 3rd argument.
This will clear to show what will be actually tested by
each test case.
Link: https://lkml.kernel.org/r/163077088607.222577.14786016266462495017.stgit@devnote2
Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
The function `xbc_show_list should` handle the keys during the
composition. Even the errors returned by the compose function. Instead
of removing the `ret` variable, it should save the value and show the
exact error. This missing variable is causing a compilation issue also.
Link: https://lkml.kernel.org/r/163077087861.222577.12884543474750968146.stgit@devnote2
Fixes: e5efaeb8a8f5 ("bootconfig: Support mixing a value and subkeys under a key")
Signed-off-by: Julio Faracco <[email protected]>
Acked-by: Masami Hiramatsu <[email protected]>
Cc: [email protected]
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
Since tracing_on indicates only "1" (default) or "0", ftrace2bconf.sh
only need to check the value is "0".
Link: https://lkml.kernel.org/r/163077087144.222577.6888011847727968737.stgit@devnote2
Fixes: 55ed4560774d ("tools/bootconfig: Add tracing_on support to helper scripts")
Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
Add a section to describe how to use the bootconfig for
specifying kernel and init parameters. This is an important
section because it is the reason why this document is under
the admin-guide.
Link: https://lkml.kernel.org/r/163077086399.222577.5881779375643977991.stgit@devnote2
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: [email protected]
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
Reorder the init parameters from bootconfig and kernel cmdline
so that the kernel cmdline always be the last part of the
parameters as below.
" -- "[bootconfig init params][cmdline init params]
This change will help us to prevent that bootconfig init params
overwrite the init params which user gives in the command line.
Link: https://lkml.kernel.org/r/163077085675.222577.5665176468023636160.stgit@devnote2
Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
Since the bootconfig is used only in the init functions,
it doesn't need to keep the data after boot. Free it when
the init memory is removed.
Link: https://lkml.kernel.org/r/163077084958.222577.5924961258513004428.stgit@devnote2
Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
When start_kthread() return error, the cpus_read_unlock() need
to be called.
Link: https://lkml.kernel.org/r/[email protected]
Cc: <[email protected]>
Fixes: c8895e271f79 ("trace/osnoise: Support hotplug operations")
Acked-by: Daniel Bristot de Oliveira <[email protected]>
Signed-off-by: Qiang.Zhang <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
Find and verify PRMT before parsing it, which eliminates a
warning on machines without PRMT:
[ 7.197173] ACPI: PRMT not present
Fixes: cefc7ca46235 ("ACPI: PRM: implement OperationRegion handler for the PlatformRtMechanism subtype")
Signed-off-by: Aubrey Li <[email protected]>
Tested-by: Paul Menzel <[email protected]>
Cc: 5.14+ <[email protected]> # 5.14+
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Fix typo ("and" should be "an") in an error message.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Randy Dunlap <[email protected]>
Cc: Quentin Casasnovas <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Use the documented kernel-doc format to prevent kernel-doc warnings.
mm/workingset.c:256: warning: No description found for return value of 'workingset_eviction'
mm/workingset.c:285: warning: Function parameter or member 'folio' not described in 'workingset_refault'
mm/workingset.c:285: warning: Excess function parameter 'page' description in 'workingset_refault'
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Randy Dunlap <[email protected]>
Cc: Matthew Wilcox (Oracle) <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
sysvipc_find_ipc() was left with a costly way to check if the offset
position fed to it is bigger than the total number of IPC IDs in use. So
much so that the time it takes to iterate over /proc/sysvipc/* files grows
exponentially for a custom benchmark that creates "N" SYSV shm segments
and then times the read of /proc/sysvipc/shm (milliseconds):
12 msecs to read 1024 segs from /proc/sysvipc/shm
18 msecs to read 2048 segs from /proc/sysvipc/shm
65 msecs to read 4096 segs from /proc/sysvipc/shm
325 msecs to read 8192 segs from /proc/sysvipc/shm
1303 msecs to read 16384 segs from /proc/sysvipc/shm
5182 msecs to read 32768 segs from /proc/sysvipc/shm
The root problem lies with the loop that computes the total amount of ids
in use to check if the "pos" feeded to sysvipc_find_ipc() grew bigger than
"ids->in_use". That is a quite inneficient way to get to the maximum
index in the id lookup table, specially when that value is already
provided by struct ipc_ids.max_idx.
This patch follows up on the optimization introduced via commit
15df03c879836 ("sysvipc: make get_maxid O(1) again") and gets rid of the
aforementioned costly loop replacing it by a simpler checkpoint based on
ipc_get_maxidx() returned value, which allows for a smooth linear increase
in time complexity for the same custom benchmark:
2 msecs to read 1024 segs from /proc/sysvipc/shm
2 msecs to read 2048 segs from /proc/sysvipc/shm
4 msecs to read 4096 segs from /proc/sysvipc/shm
9 msecs to read 8192 segs from /proc/sysvipc/shm
19 msecs to read 16384 segs from /proc/sysvipc/shm
39 msecs to read 32768 segs from /proc/sysvipc/shm
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Rafael Aquini <[email protected]>
Acked-by: Davidlohr Bueso <[email protected]>
Acked-by: Manfred Spraul <[email protected]>
Cc: Waiman Long <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Commit 544029862cbb ("selftests/memfd: add tests for F_SEAL_FUTURE_WRITE
seal") added an unused variable to mfd_assert_reopen_fd().
Delete the unused variable.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 544029862cbb ("selftests/memfd: add tests for F_SEAL_FUTURE_WRITE seal")
Signed-off-by: Greg Thelen <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: "Joel Fernandes (Google)" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Commit 05a4a9527931 ("kernel/watchdog: split up config options") adds a
new config HARDLOCKUP_DETECTOR, which selects the non-existing config
HARDLOCKUP_DETECTOR_ARCH.
Hence, ./scripts/checkkconfigsymbols.py warns:
HARDLOCKUP_DETECTOR_ARCH Referencing files: lib/Kconfig.debug
Simply drop selecting the non-existing HARDLOCKUP_DETECTOR_ARCH.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 05a4a9527931 ("kernel/watchdog: split up config options")
Signed-off-by: Lukas Bulwahn <[email protected]>
Cc: Nicholas Piggin <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Babu Moger <[email protected]>
Cc: Don Zickus <[email protected]>
Cc: Randy Dunlap <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This CONFIG option was removed in commit 278b13ce3a89 ("Input: remove
input_polled_dev implementation") so there's no point to keep it in
defconfigs any longer.
Get rid of the leftover for all arches.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Zenghui Yu <[email protected]>
Cc: Dmitry Torokhov <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Keno Fischer reported that when a binray loaded via ld-linux-x the
prctl(PR_SET_MM_MAP) doesn't allow to setup brk value because it lays
before mm:end_data.
For example a test program shows
| # ~/t
|
| start_code 401000
| end_code 401a15
| start_stack 7ffce4577dd0
| start_data 403e10
| end_data 40408c
| start_brk b5b000
| sbrk(0) b5b000
and when executed via ld-linux
| # /lib64/ld-linux-x86-64.so.2 ~/t
|
| start_code 7fc25b0a4000
| end_code 7fc25b0c4524
| start_stack 7fffcc6b2400
| start_data 7fc25b0ce4c0
| end_data 7fc25b0cff98
| start_brk 55555710c000
| sbrk(0) 55555710c000
This of course prevent criu from restoring such programs. Looking into
how kernel operates with brk/start_brk inside brk() syscall I don't see
any problem if we allow to setup brk/start_brk without checking for
end_data. Even if someone pass some weird address here on a purpose then
the worst possible result will be an unexpected unmapping of existing vma
(own vma, since prctl works with the callers memory) but test for
RLIMIT_DATA is still valid and a user won't be able to gain more memory in
case of expanding VMAs via new values shipped with prctl call.
Link: https://lkml.kernel.org/r/20210121221207.GB2174@grain
Fixes: bbdc6076d2e5 ("binfmt_elf: move brk out of mmap when doing direct loader exec")
Signed-off-by: Cyrill Gorcunov <[email protected]>
Reported-by: Keno Fischer <[email protected]>
Acked-by: Andrey Vagin <[email protected]>
Tested-by: Andrey Vagin <[email protected]>
Cc: Dmitry Safonov <[email protected]>
Cc: Kirill Tkhai <[email protected]>
Cc: Eric W. Biederman <[email protected]>
Cc: Pavel Tikhomirov <[email protected]>
Cc: Alexander Mikhalitsyn <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
pidmap_init() has already been replaced with pid_idr_init() in the commit
95846ecf9dac ("pid: replace pid bitmap implementation with IDR API").
Cleanup the stale comment which still mentions it.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Takahiro Itazuri <[email protected]>
Cc: Kuniyuki Iwashima <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Only used by core code and the tomoyo which can't be a module either.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
dump_vma_snapshot() allocs memory for *vma_meta, when dump_vma_snapshot()
returns -EFAULT, the memory will be leaked, so we free it correctly.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: a07279c9a8cd7 ("binfmt_elf, binfmt_elf_fdpic: use a VMA list snapshot")
Signed-off-by: QiuXi <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Jann Horn <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
For obvious security reasons, a core dump is aborted if the filesystem
cannot preserve ownership or permissions of the dump file.
This affects filesystems like e.g. vfat, but also something like a 9pfs
share in a Qemu test setup, running as a regular user, depending on the
security model used. In those cases, the result is an empty core file and
a confused user.
To hopefully save other people a lot of time figuring out the cause, this
patch adds a simple log message for those specific cases.
[[email protected]: s/|%s/%s/ in printk text]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: David Oberhollenzer <[email protected]>
Cc: Al Viro <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
When the refcount is decreased to 0, the resource reclamation branch is
entered. Before CPU0 reaches the race point (1), CPU1 may obtain the
spinlock and traverse the rbtree to find 'root', see
nilfs_lookup_root().
Although CPU1 will call refcount_inc() to increase the refcount, it is
obviously too late. CPU0 will release 'root' directly, CPU1 then
accesses 'root' and triggers UAF.
Use refcount_dec_and_lock() to ensure that both the operations of
decrease refcount to 0 and link deletion are lock protected eliminates
this risk.
CPU0 CPU1
nilfs_put_root():
<-------- (1)
spin_lock(&nilfs->ns_cptree_lock);
rb_erase(&root->rb_node, &nilfs->ns_cptree);
spin_unlock(&nilfs->ns_cptree_lock);
kfree(root);
<-------- use-after-free
refcount_t: underflow; use-after-free.
WARNING: CPU: 2 PID: 9476 at lib/refcount.c:28 \
refcount_warn_saturate+0x1cf/0x210 lib/refcount.c:28
Modules linked in:
CPU: 2 PID: 9476 Comm: syz-executor.0 Not tainted 5.10.45-rc1+ #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), ...
RIP: 0010:refcount_warn_saturate+0x1cf/0x210 lib/refcount.c:28
... ...
Call Trace:
__refcount_sub_and_test include/linux/refcount.h:283 [inline]
__refcount_dec_and_test include/linux/refcount.h:315 [inline]
refcount_dec_and_test include/linux/refcount.h:333 [inline]
nilfs_put_root+0xc1/0xd0 fs/nilfs2/the_nilfs.c:795
nilfs_segctor_destroy fs/nilfs2/segment.c:2749 [inline]
nilfs_detach_log_writer+0x3fa/0x570 fs/nilfs2/segment.c:2812
nilfs_put_super+0x2f/0xf0 fs/nilfs2/super.c:467
generic_shutdown_super+0xcd/0x1f0 fs/super.c:464
kill_block_super+0x4a/0x90 fs/super.c:1446
deactivate_locked_super+0x6a/0xb0 fs/super.c:335
deactivate_super+0x85/0x90 fs/super.c:366
cleanup_mnt+0x277/0x2e0 fs/namespace.c:1118
__cleanup_mnt+0x15/0x20 fs/namespace.c:1125
task_work_run+0x8e/0x110 kernel/task_work.c:151
tracehook_notify_resume include/linux/tracehook.h:188 [inline]
exit_to_user_mode_loop kernel/entry/common.c:164 [inline]
exit_to_user_mode_prepare+0x13c/0x170 kernel/entry/common.c:191
syscall_exit_to_user_mode+0x16/0x30 kernel/entry/common.c:266
do_syscall_64+0x45/0x80 arch/x86/entry/common.c:56
entry_SYSCALL_64_after_hwframe+0x44/0xa9
There is no reproduction program, and the above is only theoretical
analysis.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: ba65ae4729bf ("nilfs2: add checkpoint tree to nilfs object")
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Zhen Lei <[email protected]>
Signed-off-by: Ryusuke Konishi <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
kobject_put() should be used to cleanup the memory associated with the
kobject instead of kobject_del(). See the section "Kobject removal" of
"Documentation/core-api/kobject.rst".
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Nanyong Sun <[email protected]>
Signed-off-by: Ryusuke Konishi <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
If kobject_init_and_add returns with error, kobject_put() is needed here
to avoid memory leak, because kobject_init_and_add may return error
without freeing the memory associated with the kobject it allocated.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Nanyong Sun <[email protected]>
Signed-off-by: Ryusuke Konishi <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The kobject_put() should be used to cleanup the memory associated with the
kobject instead of kobject_del. See the section "Kobject removal" of
"Documentation/core-api/kobject.rst".
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Nanyong Sun <[email protected]>
Signed-off-by: Ryusuke Konishi <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
If kobject_init_and_add return with error, kobject_put() is needed here to
avoid memory leak, because kobject_init_and_add may return error without
freeing the memory associated with the kobject it allocated.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Nanyong Sun <[email protected]>
Signed-off-by: Ryusuke Konishi <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
In nilfs_##name##_attr_release, kobj->parent should not be referenced
because it is a NULL pointer. The release() method of kobject is always
called in kobject_put(kobj), in the implementation of kobject_put(), the
kobj->parent will be assigned as NULL before call the release() method.
So just use kobj to get the subgroups, which is more efficient and can fix
a NULL pointer reference problem.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Nanyong Sun <[email protected]>
Signed-off-by: Ryusuke Konishi <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Patch series "nilfs2: fix incorrect usage of kobject".
This patchset from Nanyong Sun fixes memory leak issues and a NULL
pointer dereference issue caused by incorrect usage of kboject in nilfs2
sysfs implementation.
This patch (of 6):
Reported by syzkaller:
BUG: memory leak
unreferenced object 0xffff888100ca8988 (size 8):
comm "syz-executor.1", pid 1930, jiffies 4294745569 (age 18.052s)
hex dump (first 8 bytes):
6c 6f 6f 70 31 00 ff ff loop1...
backtrace:
kstrdup+0x36/0x70 mm/util.c:60
kstrdup_const+0x35/0x60 mm/util.c:83
kvasprintf_const+0xf1/0x180 lib/kasprintf.c:48
kobject_set_name_vargs+0x56/0x150 lib/kobject.c:289
kobject_add_varg lib/kobject.c:384 [inline]
kobject_init_and_add+0xc9/0x150 lib/kobject.c:473
nilfs_sysfs_create_device_group+0x150/0x7d0 fs/nilfs2/sysfs.c:986
init_nilfs+0xa21/0xea0 fs/nilfs2/the_nilfs.c:637
nilfs_fill_super fs/nilfs2/super.c:1046 [inline]
nilfs_mount+0x7b4/0xe80 fs/nilfs2/super.c:1316
legacy_get_tree+0x105/0x210 fs/fs_context.c:592
vfs_get_tree+0x8e/0x2d0 fs/super.c:1498
do_new_mount fs/namespace.c:2905 [inline]
path_mount+0xf9b/0x1990 fs/namespace.c:3235
do_mount+0xea/0x100 fs/namespace.c:3248
__do_sys_mount fs/namespace.c:3456 [inline]
__se_sys_mount fs/namespace.c:3433 [inline]
__x64_sys_mount+0x14b/0x1f0 fs/namespace.c:3433
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
If kobject_init_and_add return with error, then the cleanup of kobject
is needed because memory may be allocated in kobject_init_and_add
without freeing.
And the place of cleanup_dev_kobject should use kobject_put to free the
memory associated with the kobject. As the section "Kobject removal" of
"Documentation/core-api/kobject.rst" says, kobject_del() just makes the
kobject "invisible", but it is not cleaned up. And no more cleanup will
do after cleanup_dev_kobject, so kobject_put is needed here.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Reported-by: Hulk Robot <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Nanyong Sun <[email protected]>
Signed-off-by: Ryusuke Konishi <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
There are some empty trap_init() definitions in different ARCHs, Introduce
a new weak trap_init() function to clean them up.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Kefeng Wang <[email protected]>
Acked-by: Russell King (Oracle) <[email protected]> [arm32]
Acked-by: Vineet Gupta [arc]
Acked-by: Michael Ellerman <[email protected]> [powerpc]
Cc: Yoshinori Sato <[email protected]>
Cc: Ley Foon Tan <[email protected]>
Cc: Jonas Bonn <[email protected]>
Cc: Stefan Kristiansson <[email protected]>
Cc: Stafford Horne <[email protected]>
Cc: James E.J. Bottomley <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Paul Walmsley <[email protected]>
Cc: Jeff Dike <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Anton Ivanov <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Currently, usermodehelper is enabled right before PID1 starts going
through the initcalls. However, any call of a usermodehelper from a
pure_, core_, postcore_, arch_, subsys_ or fs_ initcall is futile, as
there is no filesystem contents yet.
Up until commit e7cb072eb988 ("init/initramfs.c: do unpacking
asynchronously"), such calls, whether via some request_module(), a
legacy uevent "/sbin/hotplug" notification or something else, would
just fail silently with (presumably) -ENOENT from
kernel_execve(). However, that commit introduced the
wait_for_initramfs() synchronization hook which must be called from
the usermodehelper exec path right before the kernel_execve, in order
that request_module() et al done from *after* rootfs_initcall()
time (i.e. device_ and late_ initcalls) would continue to find a
populated initramfs as they used to.
Any call of wait_for_initramfs() done before the unpacking has been
scheduled (i.e. before rootfs_initcall time) must just return
immediately [and let the caller find an empty file system] in order
not to deadlock the machine. I mistakenly thought, and my limited
testing confirmed, that there were no such calls, so I added a
pr_warn_once() in wait_for_initramfs(). It turns out that one can
indeed hit request_module() as well as kobject_uevent_env() during
those early init calls, leading to a user-visible warning in the
kernel log emitted consistently for certain configurations.
We could just remove the pr_warn_once(), but I think it's better to
postpone enabling the usermodehelper framework until there is at least
some chance of finding the executable. That is also a little more
efficient in that a lot of work done in umh.c will be elided. However,
it does change the error seen by those early callers from -ENOENT to
-EBUSY, so there is a risk of a regression if any caller care about
the exact error value.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: e7cb072eb988 ("init/initramfs.c: do unpacking asynchronously")
Signed-off-by: Rasmus Villemoes <[email protected]>
Reported-by: Alexander Egorenkov <[email protected]>
Reported-by: Bruno Goncalves <[email protected]>
Reported-by: Heiner Kallweit <[email protected]>
Cc: Luis Chamberlain <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This counter tracks the number of watches a user has, to compare against
the 'max_user_watches' limit. This causes a scalability bottleneck on
SPECjbb2015 on large systems as there is only one user. Changing to a
per-cpu counter increases throughput of the benchmark by about 30% on a
16-socket, > 1000 thread system.
[[email protected]: fix build errors in kernel/user.c when CONFIG_EPOLL=n]
[[email protected]: move ifdefs into wrapper functions, slightly improve panic message]
Link: https://lkml.kernel.org/r/[email protected]
[[email protected]: tweak user_epoll_alloc(), per Guenter]
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Nicholas Piggin <[email protected]>
Reported-by: Anton Blanchard <[email protected]>
Cc: Alexander Viro <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The preferred git commit id reference has the form
commit <SHA-1> ("Title line")
where SHA-1 is the commit hex hash with a minimum lenth of 12 and ("Title
line") is the complete title line of the commit with a (" prefix and ")
suffix.
The current tests fail when the "Title line" has one or more embedded
double quotes.
Improve the test that finds the commit SHA-1 hex hash then ("Title line")
by using $balanced_parens for a maximum of 3 consecutive lines.
[[email protected]: add missing &&]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Joe Perches <[email protected]>
Cc: Dwaipayan Ray <[email protected]>
Cc: Lukas Bulwahn <[email protected]>
Cc: Denis Efremov <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Instead of checkpatch requiring the patch author to exactly match the
signed-off-by tag, commit 48ca2d8ac8a1 ("checkpatch: add new warnings to
author signoff checks.") safely relaxed this requirement.
Although the local-part of an email address (local-part@domain), may be
case sensitive, exploiting the case sensitivity of mailbox local-parts
impedes interoperability and is discouraged. Mailbox domains follow
normal DNS rules and are hence not case sensitive. (Refer to
https://datatracker.ietf.org/doc/html/rfc5321#section-2.4.)
Further relax the patch author and signed-off-by tag comparison by making
the email address check case insensitive.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Mimi Zohar <[email protected]>
Acked-by: Joe Perches <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Allow prefixing typical strings with L for wide strings and u for unicode
strings.
Link: https://lkml.kernel.org/r/20210801170733.1.I3f9784fd3c1007d08ec2e70b151d137687575495@changeid
Signed-off-by: Joe Perches <[email protected]>
Signed-off-by: Simon Glass <[email protected]>
Cc: Dwaipayan Ray <[email protected]>
Cc: Lukas Bulwahn <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Rename bitmap_alloc() to bitmap_zalloc() in tools to follow the bitmap API
in the kernel.
No functional changes intended.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: Yury Norov <[email protected]>
Suggested-by: Yury Norov <[email protected]>
Acked-by: Yury Norov <[email protected]>
Tested-by: Wolfram Sang <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Lobakin <[email protected]>
Cc: Alexey Klimov <[email protected]>
Cc: Dennis Zhou <[email protected]>
Cc: Ulf Hansson <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Fix all kernel-doc warnings in lib/iov_iter.c:
lib/iov_iter.c:695: warning: Function parameter or member 'i' not described in '_copy_mc_to_iter'
lib/iov_iter.c:695: warning: Excess function parameter 'iter' description in '_copy_mc_to_iter'
lib/iov_iter.c:695: warning: No description found for return value of '_copy_mc_to_iter'
lib/iov_iter.c:758: warning: Function parameter or member 'i' not described in '_copy_from_iter_flushcache'
lib/iov_iter.c:758: warning: Excess function parameter 'iter' description in '_copy_from_iter_flushcache'
lib/iov_iter.c:758: warning: No description found for return value of '_copy_from_iter_flushcache'
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Randy Dunlap <[email protected]>
Cc: Al Viro <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Fix kernel-doc warnings in dump_stack.c:
lib/dump_stack.c:97: warning: Function parameter or member 'log_lvl' not described in 'dump_stack_lvl'
lib/dump_stack.c:97: warning: expecting prototype for dump_stack(). Prototype was for dump_stack_lvl() instead
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Randy Dunlap <[email protected]>
Cc: Andrew Morton <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This follows up commit ebd09577be6c ("lib/test: convert
lib/test_list_sort.c to use KUnit").
Converting this test to KUnit makes the test a bit shorter, standardizes
how it reports pass/fail, and adds an easier way to run the test [1].
Like ebd09577be6c, this leaves the file and Kconfig option name the same,
but slightly changes their dependencies (needs CONFIG_KUNIT).
[1] Can be run via
$ ./tools/testing/kunit/kunit.py run --kunitconfig /dev/stdin <<EOF
CONFIG_KUNIT=y
CONFIG_TEST_SORT=y
EOF
[11:30:27] Starting KUnit Kernel ...
[11:30:30] ============================================================
[11:30:30] ======== [PASSED] lib_sort ========
[11:30:30] [PASSED] test_sort
[11:30:30] ============================================================
[11:30:30] Testing complete. 1 tests run. 0 failed. 0 crashed. 0 skipped.
[11:30:30] Elapsed time: 37.032s total, 0.001s configuring, 34.090s building, 0.000s running
Note: this is the time it took after a `make mrproper`.
With an incremental rebuild, this looks more like:
[11:38:58] Elapsed time: 6.444s total, 0.001s configuring, 3.416s building, 0.000s running
Since the test has no dependencies, it can also be run (with some other
tests) with just:
$ ./tools/testing/kunit/kunit.py run
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Daniel Latypov <[email protected]>
Cc: Pravin Shedge <[email protected]>
Cc: Brendan Higgins <[email protected]>
Cc: David Gow <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
RATIONAL_KUNIT_TEST selects RATIONAL, thus enabling an optional feature
the user may not want to have enabled. Fix this by making the test depend
on RATIONAL instead.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: b6c75c4afceb8bc0 ("lib/math/rational: add Kunit test cases")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Brendan Higgins <[email protected]>
Cc: Colin Ian King <[email protected]>
Cc: Trent Piepho <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Patch series "math: RATIONAL and RATIONAL_KUNIT_TEST improvements".
This series makes the RATIONAL symbol tristate, so it is not forced
builtin if all users are modular, and makes the RATIONAL_KUNIT_TEST depend
on RATIONAL, to avoid enabling RATIONAL if there are no real users.
This patch (of 2):
All but one symbols that select RATIONAL are tristate, but RATIONAL itself
is bool. Change it to tristate, so the rational fractions support code
can be modular if no builtin code relies on it.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Cc: Trent Piepho <[email protected]>
Cc: Colin Ian King <[email protected]>
Cc: Brendan Higgins <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This should have been done with commit 91ed3ed0f798 ("MAINTAINERS: update
ClangBuiltLinux IRC chat") but I did not realize it was in two separate
spots.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Nathan Chancellor <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Sami Tolvanen <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|