aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-08-18nvmem: imx: add i.MX8QM platform supportFugang Duan1-0/+7
i.MX8QM efuse table has some difference with i.MX8QXP platform, so add i.MX8QM platform support. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20190818093345.29647-8-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-18dt-bindings: fsl: scu: add new compatible string for ocotpFugang Duan1-1/+3
Add new compatible string "fsl,imx8qm-scu-ocotp" into binding doc for i.MX8 SCU OCOTP driver. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20190818093345.29647-7-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-18nvmem: mxs-ocotp: update MODULE_AUTHOR() email addressStefan Wahren1-1/+1
The email address listed in MODULE_AUTHOR() will be disabled in the near future. Replace it with my private one. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20190818093345.29647-6-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-18nvmem: meson-mx-efuse: allow reading data smaller than word_sizeMartin Blumenstingl1-1/+2
Some Amlogic boards store the Ethernet MAC address inside the eFuse. The Ethernet MAC address uses 6 bytes. The existing logic in meson_mx_efuse_read() would write beyond the end of the data buffer when trying to read data with a size that is not aligned to word_size (4 bytes on Meson8, Meson8b and Meson8m2). Calculate the remaining data to copy inside meson_mx_efuse_read() so reading 6 bytes doesn't write beyond the end of the data buffer. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20190818093345.29647-5-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-18nvmem: sunxi_sid: fix A64 SID controller supportStefan Mavrodiev1-0/+1
Like in H3, A64 SID controller doesn't return correct data when using direct access. It appears that on A64, SID needs 8 bytes of word_size. Workaround is to enable read by registers. Signed-off-by: Stefan Mavrodiev <stefan@olimex.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20190818093345.29647-4-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-18nvmem: imx-ocotp: Add i.MX8MN supportAnson Huang1-0/+7
i.MX8MN is a new SoC of i.MX8M series, it is similar to i.MX8MM in terms of addressing and clock setup, add support for its fuse read/write. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20190818093345.29647-3-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-18dt-bindings: imx-ocotp: Add i.MX8MN compatibleAnson Huang1-1/+2
Add compatible for i.MX8MN and add i.MX8MM/i.MX8MN to the description. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20190818093345.29647-2-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-18slimbus: fix slim_tid_txn()Srinivas Kandagatla1-1/+1
fix below issue reported by coccicheck ./drivers/slimbus/slimbus.h:440:3-46: duplicated argument to && or || Looks like this was a typo, SLIM_MSG_MC_REQUEST_CHANGE_VALUE is command which requires transaction ID, so fix it, this also fix the warning. Reported-by: Hariprasad Kelam <hariprasad.kelam@gmail.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20190818093902.29993-3-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-18slimbus: qcom-ngd-ctrl: Add of_node_put() before returnNishka Dasgupta1-1/+4
Each iteration of for_each_available_child_of_node puts the previous node, but in the case of a return from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put before the return in two places. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20190818093902.29993-2-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-15sgi-xpc: Use GFP_ATOMIC for kmalloc in atomic context.Fuqian Huang1-1/+1
xpc_send_activate_IRQ_uv is called from <-xpc_send_activate_IRQ_part_uv <-xpc_indicate_partition_disengaged_uv (xpc_arch_ops.indicate_partition_disengaged) <-xpc_die_deactivate <-xpc_system_die xpc_system_die is registered by atomic_notifier_chain_register, which indicates xpc_system_die may be called in atomic context. So the kmalloc in xpc_send_activate_IRQ_uv may be in atomic context. Use GFP_ATOMIC instead of GFP_KERNEL in kmalloc. Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Link: https://lore.kernel.org/r/20190805125625.24963-1-huangfq.daxian@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-15sgi-xp: xpc_uv: Make structure xpc_arch_ops_uv constantNishka Dasgupta1-1/+1
The static xpc_arch_operations structure xpc_arch_ops_uv is only copied into the structure xpc_arch_ops, after which it is never modified; nor is it used in any other way. Hence it can be declared as a constant to prevent unintended modifications of its fields. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Acked-by: Robin Holt <robinmholt@gmail.com> Link: https://lore.kernel.org/r/20190808080422.16503-1-nishkadg.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-15xilinx_sdfec: Convert to IDAMatthew Wilcox (Oracle)1-19/+6
This driver does not use the lookup abilities of the IDR, so convert it to the more space-efficient IDA. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Link: https://lore.kernel.org/r/20190807025050.28367-1-willy@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-15MAINTAINERS: add maintainer for SD-FECDragan Cvetic1-0/+11
support Add maintainer entry for Xilinx SD-FEC driver support. Signed-off-by: Derek Kiernan <derek.kiernan@xilinx.com> Signed-off-by: Dragan Cvetic <dragan.cvetic@xilinx.com> Link: https://lore.kernel.org/r/1564216438-322406-9-git-send-email-dragan.cvetic@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-15Docs: misc: xilinx_sdfec: Add documentationDragan Cvetic1-0/+1
Add SD-FEC driver documentation. Signed-off-by: Derek Kiernan <derek.kiernan@xilinx.com> Signed-off-by: Dragan Cvetic <dragan.cvetic@xilinx.com> Link: https://lore.kernel.org/r/1564216438-322406-8-git-send-email-dragan.cvetic@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-15misc: xilinx_sdfec: Add stats & status ioctlsDragan Cvetic2-0/+200
SD-FEC statistic data are: - count of data interface errors (isr_err_count) - count of Correctable ECC errors (cecc_count) - count of Uncorrectable ECC errors (uecc_count) Add support: 1. clear stats ioctl callback which clears collected statistic data, 2. get stats ioctl callback which reads a collected statistic data, 3. set default configuration ioctl callback, 4. start ioctl callback enables SD-FEC HW, 5. stop ioctl callback disables SD-FEC HW. In a failed state driver enables the following ioctls: - get status - get statistics - clear stats - set default SD-FEC device configuration Tested-by: Santhosh Dyavanapally <SDYAVANA@xilinx.com> Tested by: Punnaiah Choudary Kalluri <punnaia@xilinx.com> Tested-by: Derek Kiernan <derek.kiernan@xilinx.com> Tested-by: Dragan Cvetic <dragan.cvetic@xilinx.com> Signed-off-by: Derek Kiernan <derek.kiernan@xilinx.com> Signed-off-by: Dragan Cvetic <dragan.cvetic@xilinx.com> Link: https://lore.kernel.org/r/1564216438-322406-7-git-send-email-dragan.cvetic@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-15misc: xilinx_sdfec: Support poll file operationDragan Cvetic2-4/+249
Support monitoring and detecting the SD-FEC error events through IRQ and poll file operation. The SD-FEC device can detect one-error or multi-error events. An error triggers an interrupt which creates and run the ONE_SHOT IRQ thread. The ONE_SHOT IRQ thread detects type of error and pass that information to the poll function. The file_operation callback poll(), collects the events and updates the statistics accordingly. The function poll blocks() on waiting queue which can be unblocked by ONE_SHOT IRQ handling thread. Support SD-FEC interrupt set ioctl callback. The SD-FEC can detect two type of errors: coding errors (ECC) and a data interface errors (TLAST). The errors are events which can trigger an IRQ if enabled. The driver can monitor and detect these errors through IRQ. Also the driver updates the statistical data. Tested-by: Dragan Cvetic <dragan.cvetic@xilinx.com> Signed-off-by: Derek Kiernan <derek.kiernan@xilinx.com> Signed-off-by: Dragan Cvetic <dragan.cvetic@xilinx.com> Link: https://lore.kernel.org/r/1564216438-322406-6-git-send-email-dragan.cvetic@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-15misc: xilinx_sdfec: Add ability to get/set configDragan Cvetic2-0/+145
- Add capability to get SD-FEC config data using ioctl XSDFEC_GET_CONFIG. - Add capability to set SD-FEC data order using ioctl SDFEC_SET_ORDER. - Add capability to set SD-FEC bypass option using ioctl XSDFEC_SET_BYPASS. - Add capability to set SD-FEC active state using ioctl XSDFEC_IS_ACTIVE. Tested-by: Dragan Cvetic <dragan.cvetic@xilinx.com> Signed-off-by: Derek Kiernan <derek.kiernan@xilinx.com> Signed-off-by: Dragan Cvetic <dragan.cvetic@xilinx.com> Link: https://lore.kernel.org/r/1564216438-322406-5-git-send-email-dragan.cvetic@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-15misc: xilinx_sdfec: Add ability to configure LDPCDragan Cvetic2-0/+422
Add the capability to configure LDPC mode via the ioctl XSDFEC_ADD_LDPC_CODE_PARAMS. Tested-by: Dragan Cvetic <dragan.cvetic@xilinx.com> Signed-off-by: Derek Kiernan <derek.kiernan@xilinx.com> Signed-off-by: Dragan Cvetic <dragan.cvetic@xilinx.com> Link: https://lore.kernel.org/r/1564216438-322406-4-git-send-email-dragan.cvetic@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-15misc: xilinx_sdfec: Add ability to configure turboDragan Cvetic2-0/+177
Add the capability to configure and retrieve turbo mode via the ioctls XSDFEC_SET_TURBO and XSDFEC_GET_TURBO. Add char device interface per DT node present and support file operations: - open(), - close(), - unlocked_ioctl(), - compat_ioctl(). Tested-by: Dragan Cvetic <dragan.cvetic@xilinx.com> Signed-off-by: Derek Kiernan <derek.kiernan@xilinx.com> Signed-off-by: Dragan Cvetic <dragan.cvetic@xilinx.com> Link: https://lore.kernel.org/r/1564216438-322406-3-git-send-email-dragan.cvetic@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-15misc: xilinx_sdfec: Store driver config and stateDragan Cvetic2-6/+437
Stores configuration based on parameters from the DT node and values from the SD-FEC core plus reads the default state from the SD-FEC core. To obtain values from the core register read, write capabilities have been added plus related register map details. Tested-by: Dragan Cvetic <dragan.cvetic@xilinx.com> Signed-off-by: Derek Kiernan <derek.kiernan@xilinx.com> Signed-off-by: Dragan Cvetic <dragan.cvetic@xilinx.com> Link: https://lore.kernel.org/r/1564216438-322406-2-git-send-email-dragan.cvetic@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-12Merge 5.3-rc4 into char-misc-nextGreg Kroah-Hartman807-4484/+8117
We need the char-misc fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-11Linux 5.3-rc4Linus Torvalds1-1/+1
2019-08-11Merge tag 'dax-fixes-5.3-rc4' of ↵Linus Torvalds2-1/+7
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull dax fixes from Dan Williams: "A filesystem-dax and device-dax fix for v5.3. The filesystem-dax fix is tagged for stable as the implementation has been mistakenly throwing away all cow pages on any truncate or hole punch operation as part of the solution to coordinate device-dma vs truncate to dax pages. The device-dax change fixes up a regression this cycle from the introduction of a common 'internal per-cpu-ref' implementation. Summary: - Fix dax_layout_busy_page() to not discard private cow pages of fs/dax private mappings. - Update the memremap_pages core to properly cleanup on behalf of internal reference-count users like device-dax" * tag 'dax-fixes-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: mm/memremap: Fix reuse of pgmap instances with internal references dax: dax_layout_busy_page() should not unmap cow pages
2019-08-11Merge tag 'ntb-5.3-bugfixes' of git://github.com/jonmason/ntbLinus Torvalds1-5/+0
Pull NTB fix from Jon Mason: "Bug fix for NTB MSI kernel compile warning" * tag 'ntb-5.3-bugfixes' of git://github.com/jonmason/ntb: NTB/msi: remove incorrect MODULE defines
2019-08-10Merge tag 'riscv/for-v5.3-rc4' of ↵Linus Torvalds7-202/+24
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Paul Walmsley: "A few minor RISC-V updates for v5.3-rc4: - Remove __udivdi3() from the 32-bit Linux port, converting the only upstream user to use do_div(), per Linux policy - Convert the RISC-V standard clocksource away from per-cpu data structures, since only one is used by Linux, even on a multi-CPU system - A set of DT binding updates that remove an obsolete text binding in favor of a YAML binding, fix a bogus compatible string in the schema (thus fixing a "make dtbs_check" warning), and clarifies the future values expected in one of the RISC-V CPU properties" * tag 'riscv/for-v5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: dt-bindings: riscv: fix the schema compatible string for the HiFive Unleashed board dt-bindings: riscv: remove obsolete cpus.txt RISC-V: Remove udivdi3 riscv: delay: use do_div() instead of __udivdi3() dt-bindings: Update the riscv,isa string description RISC-V: Remove per cpu clocksource
2019-08-10Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds7-28/+48
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A few fixes for x86: - Don't reset the carefully adjusted build flags for the purgatory and remove the unwanted flags instead. The 'reset all' approach led to build fails under certain circumstances. - Unbreak CLANG build of the purgatory by avoiding the builtin memcpy/memset implementations. - Address missing prototype warnings by including the proper header - Fix yet more fall-through issues" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/lib/cpu: Address missing prototypes warning x86/purgatory: Use CFLAGS_REMOVE rather than reset KBUILD_CFLAGS x86/purgatory: Do not use __builtin_memcpy and __builtin_memset x86: mtrr: cyrix: Mark expected switch fall-through x86/ptrace: Mark expected switch fall-through
2019-08-10Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds14-16/+69
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf tooling fixes from Thomas Gleixner: "Perf tooling fixes all over the place: - Fix the selection of the main thread COMM in db-export - Fix the disassemmbly display for BPF in annotate - Fix cpumap mask setup in perf ftrace when only one CPU is present - Add the missing 'cpu_clk_unhalted.core' event - Fix CPU 0 bindings in NUMA benchmarks - Fix the module size calculations for s390 - Handle the gap between kernel end and module start on s390 correctly - Build and typo fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf pmu-events: Fix missing "cpu_clk_unhalted.core" event perf annotate: Fix s390 gap between kernel end and module start perf record: Fix module size on s390 perf tools: Fix include paths in ui directory perf tools: Fix a typo in a variable name in the Documentation Makefile perf cpumap: Fix writing to illegal memory in handling cpumap mask perf ftrace: Fix failure to set cpumask when only one cpu is present perf db-export: Fix thread__exec_comm() perf annotate: Fix printing of unaugmented disassembled instructions from BPF perf bench numa: Fix cpu0 binding
2019-08-10Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds2-10/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Thomas Gleixner: "Three fixlets for the scheduler: - Avoid double bandwidth accounting in the push & pull code - Use a sane FIFO priority for the Pressure Stall Information (PSI) thread. - Avoid permission checks when setting the scheduler params for the PSI thread" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/psi: Do not require setsched permission from the trigger creator sched/psi: Reduce psimon FIFO priority sched/deadline: Fix double accounting of rq/running bw in push & pull
2019-08-10Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds1-4/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Thomas Gleixner: "A small fix for the affinity spreading code. It failed to handle situations where a single vector was requested either due to only one CPU being available or vector exhaustion causing only a single interrupt to be granted. The fix is to simply remove the requirement in the affinity spreading code for more than one interrupt being available" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/affinity: Create affinity mask for single vector
2019-08-10Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds1-11/+9
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool warning fix from Thomas Gleixner: "The recent objtool fixes/enhancements unearthed a unbalanced CLAC in the i915 driver. Chris asked me to pick the fix up and route it through" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: drm/i915: Remove redundant user_access_end() from __copy_from_user() error path
2019-08-10Merge tag 'gfs2-v5.3-rc3.fixes' of ↵Linus Torvalds1-63/+101
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull gfs2 fix from Andreas Gruenbacher: "Fix incorrect lseek / fiemap results" * tag 'gfs2-v5.3-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: gfs2_walk_metadata fix
2019-08-10Makefile: Convert -Wimplicit-fallthrough=3 to just -Wimplicit-fallthrough ↵Joe Perches2-2/+2
for clang A compilation -Wimplicit-fallthrough warning was enabled by commit a035d552a93b ("Makefile: Globally enable fall-through warning") Even though clang 10.0.0 does not currently support this warning without a patch, clang currently does not support a value for this option. Link: https://bugs.llvm.org/show_bug.cgi?id=39382 The gcc default for this warning is 3 so removing the =3 has no effect for gcc and enables the warning for patched versions of clang. Also remove the =3 from an existing use in a parisc Makefile: arch/parisc/math-emu/Makefile Signed-off-by: Joe Perches <joe@perches.com> Reviewed-and-tested-by: Nathan Chancellor <natechancellor@gmail.com> Cc: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-10Merge tag 'char-misc-5.3-rc4' of ↵Linus Torvalds7-28/+35
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes Greg KH: "Here are some small char/misc driver fixes for 5.3-rc4. Two of these are for the habanalabs driver for issues found when running on a big-endian system (are they still alive?) The others are tiny fixes reported by people, and a MAINTAINERS update about the location of the fpga development tree. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: coresight: Fix DEBUG_LOCKS_WARN_ON for uninitialized attribute MAINTAINERS: Move linux-fpga tree to new location nvmem: Use the same permissions for eeprom as for nvmem habanalabs: fix host memory polling in BE architecture habanalabs: fix F/W download in BE architecture
2019-08-10Merge tag 'driver-core-5.3-rc4' of ↵Linus Torvalds2-3/+59
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are two small fixes for some driver core issues that have been reported. There is also a kernfs "fix" here, which was then reverted because it was found to cause problems in linux-next. The driver core fixes both resolve reported issues, one with gpioint stuff that showed up in 5.3-rc1, and the other finally (and hopefully) resolves a very long standing race when removing glue directories. It's nice to get that issue finally resolved and the developers involved should be applauded for the persistence it took to get this patch finally accepted. All of these have been in linux-next for a while with no reported issues. Well, the one reported issue, hence the revert :)" * tag 'driver-core-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: Revert "kernfs: fix memleak in kernel_ops_readdir()" kernfs: fix memleak in kernel_ops_readdir() driver core: Fix use-after-free and double free on glue directory driver core: platform: return -ENXIO for missing GpioInt
2019-08-10Merge tag 'tty-5.3-rc4' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty fix from Greg KH: "Here is a single tty kgdb fix for 5.3-rc4. It fixes an annoying log message that has caused kdb to become useless. It's another fallout from commit ddde3c18b700 ("vt: More locking checks") which tries to enforce locking checks more strictly in the tty layer, unfortunatly when kdb is stopped, there's no need for locks :) This patch has been linux-next for a while with no reported issues" * tag 'tty-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: kgdboc: disable the console lock when in kgdb
2019-08-10Merge tag 'staging-5.3-rc4' of ↵Linus Torvalds18-40/+138
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging / IIO driver fixes from Greg KH: "Here are some small staging and IIO driver fixes for 5.3-rc4. Nothing major, just resolutions for a number of small reported issues, full details in the shortlog. All have been in linux-next for a while with no reported issues" * tag 'staging-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: iio: adc: gyroadc: fix uninitialized return code docs: generic-counter.rst: fix broken references for ABI file staging: android: ion: Bail out upon SIGKILL when allocating memory. Staging: fbtft: Fix GPIO handling staging: unisys: visornic: Update the description of 'poll_for_irq()' staging: wilc1000: flush the workqueue before deinit the host staging: gasket: apex: fix copy-paste typo Staging: fbtft: Fix reset assertion when using gpio descriptor Staging: fbtft: Fix probing of gpio descriptor iio: imu: mpu6050: add missing available scan masks iio: cros_ec_accel_legacy: Fix incorrect channel setting IIO: Ingenic JZ47xx: Set clock divider on probe iio: adc: max9611: Fix misuse of GENMASK macro
2019-08-10Merge tag 'usb-5.3-rc4' of ↵Linus Torvalds11-165/+217
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes for 5.3-rc4. The "biggest" one here is moving code from one file to another in order to fix a long-standing race condition with the creation of sysfs files for USB devices. Turns out that there are now userspace tools out there that are hitting this long-known bug, so it's time to fix them. Thankfully the tool-maker in this case fixed the issue :) The other patches in here are all fixes for reported issues. Now that syzbot knows how to fuzz USB drivers better, and is starting to now fuzz the userspace facing side of them at the same time, there will be more and more small fixes like these coming, which is a good thing. All of these have been in linux-next with no reported issues" * tag 'usb-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: setup authorized_default attributes using usb_bus_notify usb: iowarrior: fix deadlock on disconnect Revert "USB: rio500: simplify locking" usb: usbfs: fix double-free of usb memory upon submiturb error usb: yurex: Fix use-after-free in yurex_delete usb: typec: tcpm: Ignore unsupported/unknown alternate mode requests xhci: Fix NULL pointer dereference at endpoint zero reset. usb: host: xhci-rcar: Fix timeout in xhci_suspend() usb: typec: ucsi: ccg: Fix uninitilized symbol error usb: typec: tcpm: remove tcpm dir if no children usb: typec: tcpm: free log buf memory when remove debug file usb: typec: tcpm: Add NULL check before dereferencing config
2019-08-10Merge tag 'pinctrl-v5.3-2' of ↵Linus Torvalds5-38/+75
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: - Delay acquisition of regmaps in the Aspeed G5 driver. - Make a symbol static to reduce compiler noise. * tag 'pinctrl-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: aspeed: Make aspeed_pinmux_ips static pinctrl: aspeed-g5: Delay acquisition of regmaps
2019-08-10Merge tag 'powerpc-5.3-4' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fix from Michael Ellerman: "Just one fix, a revert of a commit that was meant to be a minor improvement to some inline asm, but ended up having no real benefit with GCC and broke booting 32-bit machines when using Clang. Thanks to: Arnd Bergmann, Christophe Leroy, Nathan Chancellor, Nick Desaulniers, Segher Boessenkool" * tag 'powerpc-5.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: Revert "powerpc: slightly improve cache helpers"
2019-08-10Merge tag 'Wimplicit-fallthrough-5.3-rc4' of ↵Linus Torvalds22-18/+58
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull fall-through fixes from Gustavo A. R. Silva: "Mark more switch cases where we are expecting to fall through, fixing fall-through warnings in arm, sparc64, mips, i386 and s390" * tag 'Wimplicit-fallthrough-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: ARM: ep93xx: Mark expected switch fall-through scsi: fas216: Mark expected switch fall-throughs pcmcia: db1xxx_ss: Mark expected switch fall-throughs video: fbdev: omapfb_main: Mark expected switch fall-throughs watchdog: riowd: Mark expected switch fall-through s390/net: Mark expected switch fall-throughs crypto: ux500/crypt: Mark expected switch fall-throughs watchdog: wdt977: Mark expected switch fall-through watchdog: scx200_wdt: Mark expected switch fall-through watchdog: Mark expected switch fall-throughs ARM: signal: Mark expected switch fall-through mfd: omap-usb-host: Mark expected switch fall-throughs mfd: db8500-prcmu: Mark expected switch fall-throughs ARM: OMAP: dma: Mark expected switch fall-throughs ARM: alignment: Mark expected switch fall-throughs ARM: tegra: Mark expected switch fall-through ARM/hw_breakpoint: Mark expected switch fall-throughs
2019-08-09Merge tag 'kbuild-fixes-v5.3-3' of ↵Linus Torvalds3-6/+24
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - revive single target %.ko - do not create built-in.a where it is unneeded - do not create modules.order where it is unneeded - show a warning if subdir-y/m is used to visit a module Makefile * tag 'kbuild-fixes-v5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: show hint if subdir-y/m is used to visit module Makefile kbuild: generate modules.order only in directories visited by obj-y/m kbuild: fix false-positive need-builtin calculation kbuild: revive single target %.ko
2019-08-09ARM: ep93xx: Mark expected switch fall-throughGustavo A. R. Silva1-0/+1
Mark switch cases where we are expecting to fall through. Fix the following warnings (Building: arm-ep93xx_defconfig arm): arch/arm/mach-ep93xx/crunch.c: In function 'crunch_do': arch/arm/mach-ep93xx/crunch.c:46:3: warning: this statement may fall through [-Wimplicit-fallthrough=] memset(crunch_state, 0, sizeof(*crunch_state)); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/arm/mach-ep93xx/crunch.c:53:2: note: here case THREAD_NOTIFY_EXIT: ^~~~ Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-09scsi: fas216: Mark expected switch fall-throughsGustavo A. R. Silva1-0/+8
Mark switch cases where we are expecting to fall through. Fix the following warnings (Building: rpc_defconfig arm): drivers/scsi/arm/fas216.c: In function ‘fas216_disconnect_intr’: drivers/scsi/arm/fas216.c:913:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (fas216_get_last_msg(info, info->scsi.msgin_fifo) == ABORT) { ^ drivers/scsi/arm/fas216.c:919:2: note: here default: /* huh? */ ^~~~~~~ drivers/scsi/arm/fas216.c: In function ‘fas216_kick’: drivers/scsi/arm/fas216.c:1959:3: warning: this statement may fall through [-Wimplicit-fallthrough=] fas216_allocate_tag(info, SCpnt); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/arm/fas216.c:1960:2: note: here case TYPE_OTHER: ^~~~ drivers/scsi/arm/fas216.c: In function ‘fas216_busservice_intr’: drivers/scsi/arm/fas216.c:1413:3: warning: this statement may fall through [-Wimplicit-fallthrough=] fas216_stoptransfer(info); ^~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/arm/fas216.c:1414:2: note: here case STATE(STAT_STATUS, PHASE_SELSTEPS):/* Sel w/ steps -> Status */ ^~~~ drivers/scsi/arm/fas216.c:1424:3: warning: this statement may fall through [-Wimplicit-fallthrough=] fas216_stoptransfer(info); ^~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/arm/fas216.c:1425:2: note: here case STATE(STAT_MESGIN, PHASE_COMMAND): /* Command -> Message In */ ^~~~ drivers/scsi/arm/fas216.c: In function ‘fas216_funcdone_intr’: drivers/scsi/arm/fas216.c:1573:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if ((stat & STAT_BUSMASK) == STAT_MESGIN) { ^ drivers/scsi/arm/fas216.c:1579:2: note: here default: ^~~~~~~ drivers/scsi/arm/fas216.c: In function ‘fas216_handlesync’: drivers/scsi/arm/fas216.c:605:20: warning: this statement may fall through [-Wimplicit-fallthrough=] info->scsi.phase = PHASE_MSGOUT_EXPECT; ~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~ drivers/scsi/arm/fas216.c:607:2: note: here case async: ^~~~ Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-09pcmcia: db1xxx_ss: Mark expected switch fall-throughsGustavo A. R. Silva1-0/+4
Mark switch cases where we are expecting to fall through. This patch fixes the following warnings (Building: db1xxx_defconfig mips): drivers/pcmcia/db1xxx_ss.c:257:3: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/pcmcia/db1xxx_ss.c:269:3: warning: this statement may fall through [-Wimplicit-fallthrough=] Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-09video: fbdev: omapfb_main: Mark expected switch fall-throughsGustavo A. R. Silva1-0/+8
Mark switch cases where we are expecting to fall through. This patch fixes the following warning (Building: omap1_defconfig arm): drivers/watchdog/wdt285.c:170:3: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/watchdog/ar7_wdt.c:237:3: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/video/fbdev/omap/omapfb_main.c:449:23: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/video/fbdev/omap/omapfb_main.c:1549:6: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/video/fbdev/omap/omapfb_main.c:1547:3: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/video/fbdev/omap/omapfb_main.c:1545:3: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/video/fbdev/omap/omapfb_main.c:1543:3: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/video/fbdev/omap/omapfb_main.c:1540:6: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/video/fbdev/omap/omapfb_main.c:1538:3: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/video/fbdev/omap/omapfb_main.c:1535:3: warning: this statement may fall through [-Wimplicit-fallthrough=] Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-09watchdog: riowd: Mark expected switch fall-throughGustavo A. R. Silva1-1/+1
Mark switch cases where we are expecting to fall through. This patch fixes the following warnings (Building: sparc64): drivers/watchdog/riowd.c: In function ‘riowd_ioctl’: drivers/watchdog/riowd.c:136:3: warning: this statement may fall through [-Wimplicit-fallthrough=] riowd_writereg(p, riowd_timeout, WDTO_INDEX); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/watchdog/riowd.c:139:2: note: here case WDIOC_GETTIMEOUT: ^~~~ Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-09s390/net: Mark expected switch fall-throughsGustavo A. R. Silva3-1/+5
Mark switch cases where we are expecting to fall through. This patch fixes the following warnings (Building: s390): drivers/s390/net/ctcm_fsms.c: In function ‘ctcmpc_chx_attnbusy’: drivers/s390/net/ctcm_fsms.c:1703:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (grp->changed_side == 1) { ^ drivers/s390/net/ctcm_fsms.c:1707:2: note: here case MPCG_STATE_XID0IOWAIX: ^~~~ drivers/s390/net/ctcm_mpc.c: In function ‘ctc_mpc_alloc_channel’: drivers/s390/net/ctcm_mpc.c:358:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (callback) ^ drivers/s390/net/ctcm_mpc.c:360:2: note: here case MPCG_STATE_XID0IOWAIT: ^~~~ drivers/s390/net/ctcm_mpc.c: In function ‘mpc_action_timeout’: drivers/s390/net/ctcm_mpc.c:1469:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if ((fsm_getstate(rch->fsm) == CH_XID0_PENDING) && ^ drivers/s390/net/ctcm_mpc.c:1472:2: note: here default: ^~~~~~~ drivers/s390/net/ctcm_mpc.c: In function ‘mpc_send_qllc_discontact’: drivers/s390/net/ctcm_mpc.c:2087:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (grp->estconnfunc) { ^ drivers/s390/net/ctcm_mpc.c:2092:2: note: here case MPCG_STATE_FLOWC: ^~~~ drivers/s390/net/qeth_l2_main.c: In function ‘qeth_l2_process_inbound_buffer’: drivers/s390/net/qeth_l2_main.c:328:7: warning: this statement may fall through [-Wimplicit-fallthrough=] if (IS_OSN(card)) { ^ drivers/s390/net/qeth_l2_main.c:337:3: note: here default: ^~~~~~~ Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-09crypto: ux500/crypt: Mark expected switch fall-throughsGustavo A. R. Silva1-0/+6
Mark switch cases where we are expecting to fall through. This patch fixes the following warning (Building: arm): drivers/crypto/ux500/cryp/cryp.c: In function ‘cryp_save_device_context’: drivers/crypto/ux500/cryp/cryp.c:316:16: warning: this statement may fall through [-Wimplicit-fallthrough=] ctx->key_4_r = readl_relaxed(&src_reg->key_4_r); drivers/crypto/ux500/cryp/cryp.c:318:2: note: here case CRYP_KEY_SIZE_192: ^~~~ drivers/crypto/ux500/cryp/cryp.c:320:16: warning: this statement may fall through [-Wimplicit-fallthrough=] ctx->key_3_r = readl_relaxed(&src_reg->key_3_r); drivers/crypto/ux500/cryp/cryp.c:322:2: note: here case CRYP_KEY_SIZE_128: ^~~~ drivers/crypto/ux500/cryp/cryp.c:324:16: warning: this statement may fall through [-Wimplicit-fallthrough=] ctx->key_2_r = readl_relaxed(&src_reg->key_2_r); drivers/crypto/ux500/cryp/cryp.c:326:2: note: here default: ^~~~~~~ In file included from ./include/linux/io.h:13:0, from drivers/crypto/ux500/cryp/cryp_p.h:14, from drivers/crypto/ux500/cryp/cryp.c:15: drivers/crypto/ux500/cryp/cryp.c: In function ‘cryp_restore_device_context’: ./arch/arm/include/asm/io.h:92:22: warning: this statement may fall through [-Wimplicit-fallthrough=] #define __raw_writel __raw_writel ^ ./arch/arm/include/asm/io.h:299:29: note: in expansion of macro ‘__raw_writel’ #define writel_relaxed(v,c) __raw_writel((__force u32) cpu_to_le32(v),c) ^~~~~~~~~~~~ drivers/crypto/ux500/cryp/cryp.c:363:3: note: in expansion of macro ‘writel_relaxed’ writel_relaxed(ctx->key_4_r, &reg->key_4_r); ^~~~~~~~~~~~~~ drivers/crypto/ux500/cryp/cryp.c:365:2: note: here case CRYP_KEY_SIZE_192: ^~~~ In file included from ./include/linux/io.h:13:0, from drivers/crypto/ux500/cryp/cryp_p.h:14, from drivers/crypto/ux500/cryp/cryp.c:15: ./arch/arm/include/asm/io.h:92:22: warning: this statement may fall through [-Wimplicit-fallthrough=] #define __raw_writel __raw_writel ^ ./arch/arm/include/asm/io.h:299:29: note: in expansion of macro ‘__raw_writel’ #define writel_relaxed(v,c) __raw_writel((__force u32) cpu_to_le32(v),c) ^~~~~~~~~~~~ drivers/crypto/ux500/cryp/cryp.c:367:3: note: in expansion of macro ‘writel_relaxed’ writel_relaxed(ctx->key_3_r, &reg->key_3_r); ^~~~~~~~~~~~~~ drivers/crypto/ux500/cryp/cryp.c:369:2: note: here case CRYP_KEY_SIZE_128: ^~~~ In file included from ./include/linux/io.h:13:0, from drivers/crypto/ux500/cryp/cryp_p.h:14, from drivers/crypto/ux500/cryp/cryp.c:15: ./arch/arm/include/asm/io.h:92:22: warning: this statement may fall through [-Wimplicit-fallthrough=] #define __raw_writel __raw_writel ^ ./arch/arm/include/asm/io.h:299:29: note: in expansion of macro ‘__raw_writel’ #define writel_relaxed(v,c) __raw_writel((__force u32) cpu_to_le32(v),c) ^~~~~~~~~~~~ drivers/crypto/ux500/cryp/cryp.c:371:3: note: in expansion of macro ‘writel_relaxed’ writel_relaxed(ctx->key_2_r, &reg->key_2_r); ^~~~~~~~~~~~~~ drivers/crypto/ux500/cryp/cryp.c:373:2: note: here default: ^~~~~~~ Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-09watchdog: wdt977: Mark expected switch fall-throughGustavo A. R. Silva1-1/+1
Mark switch cases where we are expecting to fall through. This patch fixes the following warning (Building: arm): drivers/watchdog/wdt977.c: In function ‘wdt977_ioctl’: LD [M] drivers/media/platform/vicodec/vicodec.o drivers/watchdog/wdt977.c:400:3: warning: this statement may fall through [-Wimplicit-fallthrough=] wdt977_keepalive(); ^~~~~~~~~~~~~~~~~~ drivers/watchdog/wdt977.c:403:2: note: here case WDIOC_GETTIMEOUT: ^~~~ Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-09watchdog: scx200_wdt: Mark expected switch fall-throughGustavo A. R. Silva1-0/+1
Mark switch cases where we are expecting to fall through. This patch fixes the following warning (Building: i386): drivers/watchdog/scx200_wdt.c: In function ‘scx200_wdt_ioctl’: drivers/watchdog/scx200_wdt.c:188:3: warning: this statement may fall through [-Wimplicit-fallthrough=] scx200_wdt_ping(); ^~~~~~~~~~~~~~~~~ drivers/watchdog/scx200_wdt.c:189:2: note: here case WDIOC_GETTIMEOUT: ^~~~ Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Powered by cgit, Gruvboxed by Blaster4385.