| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Starting with patch 2cb1e08985, gfs2 started using the new function
filemap_splice_read rather than the old (and subsequently deleted)
function generic_file_splice_read.
filemap_splice_read works by taking references to a number of folios in
the page cache and splicing those folios into a pipe. The folios are
then read from the pipe and the folio references are dropped. This can
take an arbitrary amount of time. We cannot allow that in gfs2 because
those folio references will pin the inode glock to the node and prevent
it from being demoted, which can lead to cluster-wide deadlocks.
Instead, use copy_splice_read.
(In addition, the old generic_file_splice_read called into ->read_iter,
which called gfs2_file_read_iter, which took the inode glock during the
operation. The new filemap_splice_read interface does not take the
inode glock anymore. This is fixable, but it still wouldn't prevent
cluster-wide deadlocks.)
Fixes: 2cb1e08985e3 ("splice: Use filemap_splice_read() instead of generic_file_splice_read()")
Signed-off-by: Bob Peterson <[email protected]>
Signed-off-by: Andreas Gruenbacher <[email protected]>
|
|
Function gfs2_trans_add_meta() checks for the SDF_FROZEN flag to make
sure that no buffers are added to a transaction while the filesystem is
frozen. With the recent freeze/thaw rework, the SDF_FROZEN flag is
cleared after thaw_super() is called, which is sufficient for
serializing freeze/thaw.
However, other filesystem operations started after thaw_super() may now
be calling gfs2_trans_add_meta() before the SDF_FROZEN flag is cleared,
which will trigger the SDF_FROZEN check in gfs2_trans_add_meta(). Fix
that by checking the s_writers.frozen state instead.
In addition, make sure not to call gfs2_assert_withdraw() with the
sd_log_lock spin lock held. Check for a withdrawn filesystem before
checking for a frozen filesystem, and don't pin/add buffers to the
current transaction in case of a failure in either case.
Signed-off-by: Andreas Gruenbacher <[email protected]>
Signed-off-by: Bob Peterson <[email protected]>
|
|
Tao Liu reported a boot hang on an Intel Atom machine due to an unmapped
EFI config table. The reason being that the CC blob which contains the
CPUID page for AMD SNP guests is parsed for before even checking
whether the machine runs on AMD hardware.
Usually that's not a problem on !AMD hw - it simply won't find the CC
blob's GUID and return. However, if any parts of the config table
pointers array is not mapped, the kernel will #PF very early in the
decompressor stage without any opportunity to recover.
Therefore, do a superficial CPUID check before poking for the CC blob.
This will fix the current issue on real hardware. It would also work as
a guest on a non-lying hypervisor.
For the lying hypervisor, the check is done again, *after* parsing the
CC blob as the real CPUID page will be present then.
Clear the #VC handler in case SEV-{ES,SNP} hasn't been detected, as
a precaution.
Fixes: c01fce9cef84 ("x86/compressed: Add SEV-SNP feature detection/setup")
Reported-by: Tao Liu <[email protected]>
Signed-off-by: Borislav Petkov (AMD) <[email protected]>
Acked-by: Tom Lendacky <[email protected]>
Tested-by: Tao Liu <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The LDO 12 is NLDO 515 low voltage type, so fix accordingly.
Fixes: e6e3776d682d ("regulator: qcom-rpmh: Add support for PM8550 regulators")
Signed-off-by: Abel Vesa <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The driver forgets to call regulator_bulk_disable()
Add the missed call to fix it.
Fixes: 33ada14a26c8 ("ASoC: add rt5665 codec driver")
Signed-off-by: Zhang Shurong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
On a laptop with hibernation set up but not actively used, and with
secure boot and lockdown enabled kernel, 6.5-rc1 gets stuck on boot with
the following repeated messages:
A start job is running for Resume from hibernation using device /dev/system/swap (24s / no limit)
lockdown_is_locked_down: 25311154 callbacks suppressed
Lockdown: systemd-hiberna: hibernation is restricted; see man kernel_lockdown.7
...
Checking the resume code leads to commit cc89c63e2fe3 ("PM: hibernate:
move finding the resume device out of software_resume") which
inadvertently changed the return value from resume_store() to 0 when
!hibernation_available(). This apparently translates to userspace
write() returning 0 as in number of bytes written, and userspace looping
indefinitely in the attempt to write the intended value.
Fix this by returning the full number of bytes that were to be written,
as that's what was done before the commit.
Fixes: cc89c63e2fe3 ("PM: hibernate: move finding the resume device out of software_resume")
Signed-off-by: Vlastimil Babka <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Acked-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
The SBPB bit in MSR_IA32_PRED_CMD is supported only after a microcode
patch has been applied so set X86_FEATURE_SBPB only then. Otherwise,
guests would attempt to set that bit and #GP on the MSR write.
While at it, make SMT detection more robust as some guests - depending
on how and what CPUID leafs their report - lead to cpu_smt_control
getting set to CPU_SMT_NOT_SUPPORTED but SRSO_NO should be set for any
guest incarnation where one simply cannot do SMT, for whatever reason.
Fixes: fb3bd914b3ec ("x86/srso: Add a Speculative RAS Overflow mitigation")
Reported-by: Konrad Rzeszutek Wilk <[email protected]>
Reported-by: Salvatore Bonaccorso <[email protected]>
Signed-off-by: Borislav Petkov (AMD) <[email protected]>
|
|
|
|
Probably a copy/paste error with the previous block, here we are
actually managing C2H IRQs.
Fixes: 17ce252266c7 ("dmaengine: xilinx: xdma: Add xilinx xdma driver")
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
A couple of hardware registers need to be set to reflect which
interrupts have been allocated to the device. Each register is 32-bit
wide and can receive four 8-bit values. If we provide any other interrupt
number than four, the irq_num variable will never be 0 within the while
check and the while block will loop forever.
There is an easy way to prevent this: just break the for loop
when we reach "irq_num == 0", which anyway means all interrupts have
been processed.
Cc: [email protected]
Fixes: 17ce252266c7 ("dmaengine: xilinx: xdma: Add xilinx xdma driver")
Signed-off-by: Miquel Raynal <[email protected]>
Acked-by: Lizhi Hou <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
No functional modification involved.
drivers/dma/owl-dma.c:208: warning: expecting prototype for struct owl_dma_pchan. Prototype was for struct owl_dma_vchan instead HDRTEST usr/include/sound/asequencer.h
Fixes: 47e20577c24d ("dmaengine: Add Actions Semi Owl family S900 DMA driver")
Signed-off-by: Zhang Jianhua <[email protected]>
Reviewed-by: Randy Dunlap <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
Disabling IDXD device doesn't reset Page Request Service (PRS)
disable flag to its initial value 0. This may cause user confusion
because once PRS is disabled user will see PRS still remains the
previous setting (i.e. disabled) via sysfs interface even after the
device is disabled.
To eliminate user confusion, reset PRS disable flag to ensure that
the PRS flag bit reflects correct state after the device is disabled.
Additionally, simplify the code by setting wq->flags to 0, which clears
all flag bits, including any future additions.
Fixes: f2dc327131b5 ("dmaengine: idxd: add per wq PRS disable")
Tested-by: Tony Zhu <[email protected]>
Signed-off-by: Fenghua Yu <[email protected]>
Reviewed-by: Dave Jiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
pl330_pause() does not set anything to indicate paused condition which
causes pl330_tx_status() to return DMA_IN_PROGRESS. This breaks 8250
DMA flush after the fix in commit 57e9af7831dc ("serial: 8250_dma: Fix
DMA Rx rearm race"). The function comment for pl330_pause() claims
pause is supported but resume is not which is enough for 8250 DMA flush
to work as long as DMA status reports DMA_PAUSED when appropriate.
Add PAUSED state for descriptor and mark BUSY descriptors with PAUSED
in pl330_pause(). Return DMA_PAUSED from pl330_tx_status() when the
descriptor is PAUSED.
Reported-by: Richard Tresidder <[email protected]>
Tested-by: Richard Tresidder <[email protected]>
Fixes: 88987d2c7534 ("dmaengine: pl330: add DMA_PAUSE feature")
Cc: [email protected]
Link: https://lore.kernel.org/linux-serial/[email protected]/
Signed-off-by: Ilpo Järvinen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
The codeaurora.org email domain is defunct and will bounce.
Update entries to Sinan's kernel.org address which is the address in
MAINTAINERS for this component.
Signed-off-by: Jeffrey Hugo <[email protected]>
Acked-By: Sinan Kaya <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
When 'mcf_edma' is allocated, some space is allocated for a
flexible array at the end of the struct. 'chans' item are allocated, that is
to say 'pdata->dma_channels'.
Then, this number of item is stored in 'mcf_edma->n_chans'.
A few lines later, if 'mcf_edma->n_chans' is 0, then a default value of 64
is set.
This ends to no space allocated by devm_kzalloc() because chans was 0, but
64 items are read and/or written in some not allocated memory.
Change the logic to define a default value before allocating the memory.
Fixes: e7a3ff92eaf1 ("dmaengine: fsl-edma: add ColdFire mcf5441x edma support")
Signed-off-by: Christophe JAILLET <[email protected]>
Link: https://lore.kernel.org/r/f55d914407c900828f6fad3ea5fa791a5f17b9a4.1685172449.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix a wrong check for O_TMPFILE during RESOLVE_CACHED lookup
- Clean up directory iterators and clarify file_needs_f_pos_lock()
* tag 'v6.5-rc5.vfs.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: rely on ->iterate_shared to determine f_pos locking
vfs: get rid of old '->iterate' directory operation
proc: fix missing conversion to 'iterate_shared'
open: make RESOLVE_CACHED correctly test for O_TMPFILE
|
|
ionic_start_queues_reconfig returns an error code if txrx_init fails.
Handle this error code in the relevant places.
This fixes a corner case where the device could get left in a detached
state if the CMB reconfig fails and the attempt to clean up the mess
also fails. Note that calling netif_device_attach when the netdev is
already attached does not lead to unexpected behavior.
Change goto name "errout" to "err_out" to maintain consistency across
goto statements.
Fixes: 40bc471dc714 ("ionic: add tx/rx-push support with device Component Memory Buffers")
Fixes: 6f7d6f0fd7a3 ("ionic: pull reset_queues into tx_timeout handler")
Signed-off-by: Nitya Sunkad <[email protected]>
Signed-off-by: Shannon Nelson <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
In case rhashtable_lookup_insert_fast() fails inside vxlan_vni_add(), the
allocated percpu vni stats are not freed on the error path.
Introduce vxlan_vni_free() which would work as a nice wrapper to free
vxlan_vni_node resources properly.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 4095e0e1328a ("drivers: vxlan: vnifilter: per vni stats")
Suggested-by: Ido Schimmel <[email protected]>
Signed-off-by: Fedor Pchelkin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Skip status check for both pfe1100 and pfe3000 because the communication
error is also observed on pfe1100 devices.
Signed-off-by: Tao Ren <[email protected]>
Fixes: 626bb2f3fb3c hwmon: (pmbus) add driver for BEL PFE1100 and PFE3000
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
|
|
Now that we removed ->iterate we don't need to check for either
->iterate or ->iterate_shared in file_needs_f_pos_lock(). Simply check
for ->iterate_shared instead. This will tell us whether we need to
unconditionally take the lock. Not just does it allow us to avoid
checking f_inode's mode it also actually clearly shows that we're
locking because of readdir.
Signed-off-by: Christian Brauner <[email protected]>
|
|
All users now just use '->iterate_shared()', which only takes the
directory inode lock for reading.
Filesystems that never got convered to shared mode now instead use a
wrapper that drops the lock, re-takes it in write mode, calls the old
function, and then downgrades the lock back to read mode.
This way the VFS layer and other callers no longer need to care about
filesystems that never got converted to the modern era.
The filesystems that use the new wrapper are ceph, coda, exfat, jfs,
ntfs, ocfs2, overlayfs, and vboxsf.
Honestly, several of them look like they really could just iterate their
directories in shared mode and skip the wrapper entirely, but the point
of this change is to not change semantics or fix filesystems that
haven't been fixed in the last 7+ years, but to finally get rid of the
dual iterators.
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
I'm looking at the directory handling due to the discussion about f_pos
locking (see commit 797964253d35: "file: reinstate f_pos locking
optimization for regular files"), and wanting to clean that up.
And one source of ugliness is how we were supposed to move filesystems
over to the '->iterate_shared()' function that only takes the inode lock
for reading many many years ago, but several filesystems still use the
bad old '->iterate()' that takes the inode lock for exclusive access.
See commit 6192269444eb ("introduce a parallel variant of ->iterate()")
that also added some documentation stating
Old method is only used if the new one is absent; eventually it will
be removed. Switch while you still can; the old one won't stay.
and that was back in April 2016. Here we are, many years later, and the
old version is still clearly sadly alive and well.
Now, some of those old style iterators are probably just because the
filesystem may end up having per-inode mutable data that it uses for
iterating a directory, but at least one case is just a mistake.
Al switched over most filesystems to use '->iterate_shared()' back when
it was introduced. In particular, the /proc filesystem was converted as
one of the first ones in commit f50752eaa0b0 ("switch all procfs
directories ->iterate_shared()").
But then later one new user of '->iterate()' was then re-introduced by
commit 6d9c939dbe4d ("procfs: add smack subdir to attrs").
And that's clearly not what we wanted, since that new case just uses the
same 'proc_pident_readdir()' and 'proc_pident_lookup()' helper functions
that other /proc pident directories use, and they are most definitely
safe to use with the inode lock held shared.
So just fix it.
This still leaves a fair number of oddball filesystems using the
old-style directory iterator (ceph, coda, exfat, jfs, ntfs, ocfs2,
overlayfs, and vboxsf), but at least we don't have any remaining in the
core filesystems.
I'm going to add a wrapper function that just drops the read-lock and
takes it as a write lock, so that we can clean up the core vfs layer and
make all the ugly 'this filesystem needs exclusive inode locking' be
just filesystem-internal warts.
I just didn't want to make that conversion when we still had a core user
left.
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
O_TMPFILE is actually __O_TMPFILE|O_DIRECTORY. This means that the old
fast-path check for RESOLVE_CACHED would reject all users passing
O_DIRECTORY with -EAGAIN, when in fact the intended test was to check
for __O_TMPFILE.
Cc: [email protected] # v5.12+
Fixes: 99668f618062 ("fs: expose LOOKUP_CACHED through openat2() RESOLVE_CACHED")
Signed-off-by: Aleksa Sarai <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
syzbot/KCSAN reported data-races in macsec whenever dev->stats fields
are updated.
It appears all of these updates can happen from multiple cpus.
Adopt SMP safe DEV_STATS_INC() to update dev->stats fields.
Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Reported-by: syzbot <[email protected]>
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Sabrina Dubroca <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
TLS records end with a 16B tag. For TLS device offload we only
need to make space for this tag in the stream, the device will
generate and replace it with the actual calculated tag.
Long time ago the code would just re-reference the head frag
which mostly worked but was suboptimal because it prevented TCP
from combining the record into a single skb frag. I'm not sure
if it was correct as the first frag may be shorter than the tag.
The commit under fixes tried to replace that with using the page
frag and if the allocation failed rolling back the data, if record
was long enough. It achieves better fragment coalescing but is
also buggy.
We don't roll back the iterator, so unless we're at the end of
send we'll skip the data we designated as tag and start the
next record as if the rollback never happened.
There's also the possibility that the record was constructed
with MSG_MORE and the data came from a different syscall and
we already told the user space that we "got it".
Allocate a single dummy page and use it as fallback.
Found by code inspection, and proven by forcing allocation
failures.
Fixes: e7b159a48ba6 ("net/tls: remove the record tail optimization")
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Although the memory map of i.MX93 reference manual rev. 2 claims that
analog top has start address of 0x44480000 and end address of 0x4448ffff,
this overlaps with TMU memory area starting at 0x44482000, as stated in
section 73.6.1.
As PLL configuration registers start at addresses up to 0x44481400, as used
by clk-imx93, reduce the anatop size to 0x2000, so exclude the TMU area
but keep all PLL registers inside.
Fixes: ec8b5b5058ea ("arm64: dts: freescale: Add i.MX93 dtsi support")
Signed-off-by: Alexander Stein <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
Reviewed-by: Jacky Bai <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
Pull rust fixes from Miguel Ojeda:
- Allocator: prevent mis-aligned allocation
- Types: delete 'ForeignOwnable::borrow_mut'. A sound replacement is
planned for the merge window
- Build: fix bindgen error with UBSAN_BOUNDS_STRICT
* tag 'rust-fixes-6.5-rc5' of https://github.com/Rust-for-Linux/linux:
rust: fix bindgen build error with UBSAN_BOUNDS_STRICT
rust: delete `ForeignOwnable::borrow_mut`
rust: allocator: Prevent mis-aligned allocation
|
|
There are multiple smb2_ea_info buffers in FILE_FULL_EA_INFORMATION request
from client. ksmbd find next smb2_ea_info using ->NextEntryOffset of
current smb2_ea_info. ksmbd need to validate buffer length Before
accessing the next ea. ksmbd should check buffer length using buf_len,
not next variable. next is the start offset of current ea that got from
previous ea.
Cc: [email protected]
Reported-by: [email protected] # ZDI-CAN-21598
Signed-off-by: Namjae Jeon <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
In commit 2b9b8f3b68ed ("ksmbd: validate command payload size"), except
for SMB2_OPLOCK_BREAK_HE command, the request size of other commands
is not checked, it's not expected. Fix it by add check for request
size of other commands.
Cc: [email protected]
Fixes: 2b9b8f3b68ed ("ksmbd: validate command payload size")
Acked-by: Namjae Jeon <[email protected]>
Signed-off-by: Long Li <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata fix from Damien Le Moal:
- Prevent the scsi disk driver from issuing a START STOP UNIT command
for ATA devices during system resume as this causes various issues
reported by multiple users.
* tag 'ata-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata,scsi: do not issue START STOP UNIT on resume
|
|
Commit af8b04c63708 ("zram: simplify bvec iteration in
__zram_make_request") changed the bio iteration in zram to rely on the
implicit capping to page boundaries in bio_for_each_segment. But it
failed to care for the fact zram not only care about the page alignment
of the bio payload, but also the page alignment into the device. For
buffered I/O and swap those are the same, but for direct I/O or kernel
internal I/O like XFS log buffer writes they can differ.
Fix this by open coding bio_for_each_segment and limiting the bvec len
so that it never crosses over a page alignment boundary in the device
in addition to the payload boundary already taken care of by
bio_iter_iovec.
Cc: [email protected]
Fixes: af8b04c63708 ("zram: simplify bvec iteration in __zram_make_request")
Reported-by: Dusty Mabe <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Acked-by: Sergey Senozhatsky <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Pull smb client fix from Steve French:
- Fix DFS interlink problem (different namespace)
* tag '6.5-rc4-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: fix dfs link mount against w2k8
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix vmemmap altmap boundary check which could cause memory hotunplug
failure
- Create a dummy stackframe to fix ftrace stack unwind
- Fix secondary thread bringup for Book3E ELFv2 kernels
- Use early_ioremap/unmap() in via_calibrate_decr()
Thanks to Aneesh Kumar K.V, Benjamin Gray, Christophe Leroy, David
Hildenbrand, and Naveen N Rao.
* tag 'powerpc-6.5-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/powermac: Use early_* IO variants in via_calibrate_decr()
powerpc/64e: Fix secondary thread bringup for ELFv2 kernels
powerpc/ftrace: Create a dummy stackframe to fix stack unwind
powerpc/mm/altmap: Fix altmap boundary check
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
- early fixmap preallocation to fix boot failures on kernel >= 6.4
- remove DMA leftover code in parport_gsc
- drop old comments and code style fixes
* tag 'parisc-for-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: unaligned: Add required spaces after ','
parport: gsc: remove DMA leftover code
parisc: pci-dma: remove unused and dead EISA code and comment
parisc/mm: preallocate fixmap page tables at init
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-linus
Georgi writes:
interconnect fixes for v6.5-rc
This contains a fix for a potential issue on some Qualcomm SoCs where
bit-masks should have been used to configure the Bus Clock Manager
hardware, instead of bandwidth units.
- interconnect: qcom: Add support for mask-based BCMs
- interconnect: qcom: sm8450: add enable_mask for bcm nodes
- interconnect: qcom: sm8550: add enable_mask for bcm nodes
- interconnect: qcom: sa8775p: add enable_mask for bcm nodes
Signed-off-by: Georgi Djakov <[email protected]>
* tag 'icc-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: qcom: sa8775p: add enable_mask for bcm nodes
interconnect: qcom: sm8550: add enable_mask for bcm nodes
interconnect: qcom: sm8450: add enable_mask for bcm nodes
interconnect: qcom: Add support for mask-based BCMs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A few clk driver fixes for some SoC clk drivers:
- Change a usleep() to udelay() to avoid scheduling while atomic in
the Amlogic PLL code
- Revert a patch to the Mediatek MT8183 driver that caused an
out-of-bounds write
- Return the right error value when devm_of_iomap() fails in
imx93_clocks_probe()
- Constrain the Kconfig for the fixed mmio clk so that it depends on
HAS_IOMEM and can't be compiled on architectures such as s390"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: fixed-mmio: make COMMON_CLK_FIXED_MMIO depend on HAS_IOMEM
clk: imx93: Propagate correct error in imx93_clocks_probe()
clk: mediatek: mt8183: Add back SSPM related clocks
clk: meson: change usleep_range() to udelay() for atomic context
|
|
dccp_sendmsg() reads dp->dccps_mss_cache before locking the socket.
Same thing in do_dccp_getsockopt().
Add READ_ONCE()/WRITE_ONCE() annotations,
and change dccp_sendmsg() to check again dccps_mss_cache
after socket is locked.
Fixes: 7c657876b63c ("[DCCP]: Initial implementation")
Reported-by: syzbot <[email protected]>
Signed-off-by: Eric Dumazet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Matthieu Baerts says:
====================
mptcp: more fixes for v6.5
Here is a new batch of fixes related to MPTCP for v6.5 and older.
Patches 1 and 2 fix issues with MPTCP Join selftest when manually
launched with '-i' parameter to use 'ip mptcp' tool instead of the
dedicated one (pm_nl_ctl). The issues have been there since v5.18.
Thank you Andrea for your first contributions to MPTCP code in the
upstream kernel!
Patch 3 avoids corrupting the data stream when trying to reset
connections that have fallen back to TCP. This can happen from v6.1.
Patch 4 fixes a race when doing a disconnect() and an accept() in
parallel on a listener socket. The issue only happens in rare cases if
the user is really unlucky since a fix that landed in v6.3 but
backported up to v6.1.
====================
Link: https://lore.kernel.org/r/20230803-upstream-net-20230803-misc-fixes-6-5-v1-0-6671b1ab11cc@tessares.net
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Despite commit 0ad529d9fd2b ("mptcp: fix possible divide by zero in
recvmsg()"), the mptcp protocol is still prone to a race between
disconnect() (or shutdown) and accept.
The root cause is that the mentioned commit checks the msk-level
flag, but mptcp_stream_accept() does acquire the msk-level lock,
as it can rely directly on the first subflow lock.
As reported by Christoph than can lead to a race where an msk
socket is accepted after that mptcp_subflow_queue_clean() releases
the listener socket lock and just before it takes destructive
actions leading to the following splat:
BUG: kernel NULL pointer dereference, address: 0000000000000012
PGD 5a4ca067 P4D 5a4ca067 PUD 37d4c067 PMD 0
Oops: 0000 [#1] PREEMPT SMP
CPU: 2 PID: 10955 Comm: syz-executor.5 Not tainted 6.5.0-rc1-gdc7b257ee5dd #37
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
RIP: 0010:mptcp_stream_accept+0x1ee/0x2f0 include/net/inet_sock.h:330
Code: 0a 09 00 48 8b 1b 4c 39 e3 74 07 e8 bc 7c 7f fe eb a1 e8 b5 7c 7f fe 4c 8b 6c 24 08 eb 05 e8 a9 7c 7f fe 49 8b 85 d8 09 00 00 <0f> b6 40 12 88 44 24 07 0f b6 6c 24 07 bf 07 00 00 00 89 ee e8 89
RSP: 0018:ffffc90000d07dc0 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff888037e8d020 RCX: ffff88803b093300
RDX: 0000000000000000 RSI: ffffffff833822c5 RDI: ffffffff8333896a
RBP: 0000607f82031520 R08: ffff88803b093300 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000003e83 R12: ffff888037e8d020
R13: ffff888037e8c680 R14: ffff888009af7900 R15: ffff888009af6880
FS: 00007fc26d708640(0000) GS:ffff88807dd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000012 CR3: 0000000066bc5001 CR4: 0000000000370ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
do_accept+0x1ae/0x260 net/socket.c:1872
__sys_accept4+0x9b/0x110 net/socket.c:1913
__do_sys_accept4 net/socket.c:1954 [inline]
__se_sys_accept4 net/socket.c:1951 [inline]
__x64_sys_accept4+0x20/0x30 net/socket.c:1951
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x47/0xa0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Address the issue by temporary removing the pending request socket
from the accept queue, so that racing accept() can't touch them.
After depleting the msk - the ssk still exists, as plain TCP sockets,
re-insert them into the accept queue, so that later inet_csk_listen_stop()
will complete the tcp socket disposal.
Fixes: 2a6a870e44dd ("mptcp: stops worker on unaccepted sockets at listener close")
Cc: [email protected]
Reported-by: Christoph Paasch <[email protected]>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/423
Signed-off-by: Paolo Abeni <[email protected]>
Reviewed-by: Matthieu Baerts <[email protected]>
Signed-off-by: Matthieu Baerts <[email protected]>
Link: https://lore.kernel.org/r/20230803-upstream-net-20230803-misc-fixes-6-5-v1-4-6671b1ab11cc@tessares.net
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Since the blamed commit, the MPTCP protocol unconditionally sends
TCP resets on all the subflows on disconnect().
That fits full-blown MPTCP sockets - to implement the fastclose
mechanism - but causes unexpected corruption of the data stream,
caught as sporadic self-tests failures.
Fixes: d21f83485518 ("mptcp: use fastclose on more edge scenarios")
Cc: [email protected]
Tested-by: Matthieu Baerts <[email protected]>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/419
Signed-off-by: Paolo Abeni <[email protected]>
Reviewed-by: Matthieu Baerts <[email protected]>
Signed-off-by: Matthieu Baerts <[email protected]>
Link: https://lore.kernel.org/r/20230803-upstream-net-20230803-misc-fixes-6-5-v1-3-6671b1ab11cc@tessares.net
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
mptcp_join 'implicit EP' test currently fails when using ip mptcp:
$ ./mptcp_join.sh -iI
<snip>
001 implicit EP creation[fail] expected '10.0.2.2 10.0.2.2 id 1 implicit' found '10.0.2.2 id 1 rawflags 10 '
Error: too many addresses or duplicate one: -22.
ID change is prevented[fail] expected '10.0.2.2 10.0.2.2 id 1 implicit' found '10.0.2.2 id 1 rawflags 10 '
modif is allowed[fail] expected '10.0.2.2 10.0.2.2 id 1 signal' found '10.0.2.2 id 1 signal '
This happens because of two reasons:
- iproute v6.3.0 does not support the implicit flag, fixed with
iproute2-next commit 3a2535a41854 ("mptcp: add support for implicit
flag")
- pm_nl_check_endpoint wrongly expects the ip address to be repeated two
times in iproute output, and does not account for a final whitespace
in it.
This fixes the issue trimming the whitespace in the output string and
removing the double address in the expected string.
Fixes: 69c6ce7b6eca ("selftests: mptcp: add implicit endpoint test case")
Cc: [email protected]
Signed-off-by: Andrea Claudi <[email protected]>
Reviewed-by: Matthieu Baerts <[email protected]>
Signed-off-by: Matthieu Baerts <[email protected]>
Link: https://lore.kernel.org/r/20230803-upstream-net-20230803-misc-fixes-6-5-v1-2-6671b1ab11cc@tessares.net
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
mptcp_join 'delete and re-add' test fails when using ip mptcp:
$ ./mptcp_join.sh -iI
<snip>
002 delete and re-add before delete[ ok ]
mptcp_info subflows=1 [ ok ]
Error: argument "ADDRESS" is wrong: invalid for non-zero id address
after delete[fail] got 2:2 subflows expected 1
This happens because endpoint delete includes an ip address while id is
not 0, contrary to what is indicated in the ip mptcp man page:
"When used with the delete id operation, an IFADDR is only included when
the ID is 0."
This fixes the issue using the $addr variable in pm_nl_del_endpoint()
only when id is 0.
Fixes: 34aa6e3bccd8 ("selftests: mptcp: add ip mptcp wrappers")
Cc: [email protected]
Signed-off-by: Andrea Claudi <[email protected]>
Reviewed-by: Matthieu Baerts <[email protected]>
Signed-off-by: Matthieu Baerts <[email protected]>
Link: https://lore.kernel.org/r/20230803-upstream-net-20230803-misc-fixes-6-5-v1-1-6671b1ab11cc@tessares.net
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Florian Westphal says:
====================
tunnels: fix ipv4 pmtu icmp checksum
The checksum of the generated ipv4 icmp pmtud message is
only correct if the skb that causes the icmp error generation
is linear.
Fix this and add a selftest for this.
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
TCP might get stuck if a nonlinear skb exceeds the path MTU,
icmp error contains an incorrect icmp checksum in that case.
Extend the existing test for vxlan to also send at least 1MB worth of
data via TCP in addition to the existing 'large icmp packet adds
route exception'.
On my test VM this fails due to 0-size output file without
"tunnels: fix kasan splat when generating ipv4 pmtu error".
Signed-off-by: Florian Westphal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
If we try to emit an icmp error in response to a nonliner skb, we get
BUG: KASAN: slab-out-of-bounds in ip_compute_csum+0x134/0x220
Read of size 4 at addr ffff88811c50db00 by task iperf3/1691
CPU: 2 PID: 1691 Comm: iperf3 Not tainted 6.5.0-rc3+ #309
[..]
kasan_report+0x105/0x140
ip_compute_csum+0x134/0x220
iptunnel_pmtud_build_icmp+0x554/0x1020
skb_tunnel_check_pmtu+0x513/0xb80
vxlan_xmit_one+0x139e/0x2ef0
vxlan_xmit+0x1867/0x2760
dev_hard_start_xmit+0x1ee/0x4f0
br_dev_queue_push_xmit+0x4d1/0x660
[..]
ip_compute_csum() cannot deal with nonlinear skbs, so avoid it.
After this change, splat is gone and iperf3 is no longer stuck.
Fixes: 4cb47a8644cc ("tunnels: PMTU discovery support for directly bridged IP packets")
Signed-off-by: Florian Westphal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Another syzbot report [1] is about tp->status lockless reads
from __packet_get_status()
[1]
BUG: KCSAN: data-race in __packet_rcv_has_room / __packet_set_status
write to 0xffff888117d7c080 of 8 bytes by interrupt on cpu 0:
__packet_set_status+0x78/0xa0 net/packet/af_packet.c:407
tpacket_rcv+0x18bb/0x1a60 net/packet/af_packet.c:2483
deliver_skb net/core/dev.c:2173 [inline]
__netif_receive_skb_core+0x408/0x1e80 net/core/dev.c:5337
__netif_receive_skb_one_core net/core/dev.c:5491 [inline]
__netif_receive_skb+0x57/0x1b0 net/core/dev.c:5607
process_backlog+0x21f/0x380 net/core/dev.c:5935
__napi_poll+0x60/0x3b0 net/core/dev.c:6498
napi_poll net/core/dev.c:6565 [inline]
net_rx_action+0x32b/0x750 net/core/dev.c:6698
__do_softirq+0xc1/0x265 kernel/softirq.c:571
invoke_softirq kernel/softirq.c:445 [inline]
__irq_exit_rcu+0x57/0xa0 kernel/softirq.c:650
sysvec_apic_timer_interrupt+0x6d/0x80 arch/x86/kernel/apic/apic.c:1106
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:645
smpboot_thread_fn+0x33c/0x4a0 kernel/smpboot.c:112
kthread+0x1d7/0x210 kernel/kthread.c:379
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308
read to 0xffff888117d7c080 of 8 bytes by interrupt on cpu 1:
__packet_get_status net/packet/af_packet.c:436 [inline]
packet_lookup_frame net/packet/af_packet.c:524 [inline]
__tpacket_has_room net/packet/af_packet.c:1255 [inline]
__packet_rcv_has_room+0x3f9/0x450 net/packet/af_packet.c:1298
tpacket_rcv+0x275/0x1a60 net/packet/af_packet.c:2285
deliver_skb net/core/dev.c:2173 [inline]
dev_queue_xmit_nit+0x38a/0x5e0 net/core/dev.c:2243
xmit_one net/core/dev.c:3574 [inline]
dev_hard_start_xmit+0xcf/0x3f0 net/core/dev.c:3594
__dev_queue_xmit+0xefb/0x1d10 net/core/dev.c:4244
dev_queue_xmit include/linux/netdevice.h:3088 [inline]
can_send+0x4eb/0x5d0 net/can/af_can.c:276
bcm_can_tx+0x314/0x410 net/can/bcm.c:302
bcm_tx_timeout_handler+0xdb/0x260
__run_hrtimer kernel/time/hrtimer.c:1685 [inline]
__hrtimer_run_queues+0x217/0x700 kernel/time/hrtimer.c:1749
hrtimer_run_softirq+0xd6/0x120 kernel/time/hrtimer.c:1766
__do_softirq+0xc1/0x265 kernel/softirq.c:571
run_ksoftirqd+0x17/0x20 kernel/softirq.c:939
smpboot_thread_fn+0x30a/0x4a0 kernel/smpboot.c:164
kthread+0x1d7/0x210 kernel/kthread.c:379
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308
value changed: 0x0000000000000000 -> 0x0000000020000081
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 19 Comm: ksoftirqd/1 Not tainted 6.4.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023
Fixes: 69e3c75f4d54 ("net: TX_RING and packet mmap")
Reported-by: syzbot <[email protected]>
Signed-off-by: Eric Dumazet <[email protected]>
Reviewed-by: Willem de Bruijn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Fix a bug in a python script for Hyper-V (Ani Sinha)
- Workaround a bug in Hyper-V when IBT is enabled (Michael Kelley)
- Fix an issue parsing MP table when Linux runs in VTL2 (Saurabh
Sengar)
- Several cleanup patches (Nischala Yelchuri, Kameron Carr, YueHaibing,
ZhiHu)
* tag 'hyperv-fixes-signed-20230804' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: vmbus: Remove unused extern declaration vmbus_ontimer()
x86/hyperv: add noop functions to x86_init mpparse functions
vmbus_testing: fix wrong python syntax for integer value comparison
x86/hyperv: fix a warning in mshyperv.h
x86/hyperv: Disable IBT when hypercall page lacks ENDBR instruction
x86/hyperv: Improve code for referencing hyperv_pcpu_input_arg
Drivers: hv: Change hv_free_hyperv_page() to take void * argument
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A pair of fixes for build-related failures in the selftests
- A fix for a sparse warning in acpi_os_ioremap()
- A fix to restore the kernel PA offset in vmcoreinfo, to fix crash
handling
* tag 'riscv-for-linus-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
Documentation: kdump: Add va_kernel_pa_offset for RISCV64
riscv: Export va_kernel_pa_offset in vmcoreinfo
RISC-V: ACPI: Fix acpi_os_ioremap to return iomem address
selftests: riscv: Fix compilation error with vstate_exec_nolibc.c
selftests/riscv: fix potential build failure during the "emit_tests" step
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix a sparse warning triggered by the TPMI interface recently added to
the Intel RAPL power capping driver (Zhang Rui)"
* tag 'pm-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
powercap: intel_rapl: Fix a sparse warning in TPMI interface
|
|
driver remove
When the tagging protocol in current use is "ocelot-8021q" and we unbind
the driver, we see this splat:
$ echo '0000:00:00.2' > /sys/bus/pci/drivers/fsl_enetc/unbind
mscc_felix 0000:00:00.5 swp0: left promiscuous mode
sja1105 spi2.0: Link is Down
DSA: tree 1 torn down
mscc_felix 0000:00:00.5 swp2: left promiscuous mode
sja1105 spi2.2: Link is Down
DSA: tree 3 torn down
fsl_enetc 0000:00:00.2 eno2: left promiscuous mode
mscc_felix 0000:00:00.5: Link is Down
------------[ cut here ]------------
RTNL: assertion failed at net/dsa/tag_8021q.c (409)
WARNING: CPU: 1 PID: 329 at net/dsa/tag_8021q.c:409 dsa_tag_8021q_unregister+0x12c/0x1a0
Modules linked in:
CPU: 1 PID: 329 Comm: bash Not tainted 6.5.0-rc3+ #771
pc : dsa_tag_8021q_unregister+0x12c/0x1a0
lr : dsa_tag_8021q_unregister+0x12c/0x1a0
Call trace:
dsa_tag_8021q_unregister+0x12c/0x1a0
felix_tag_8021q_teardown+0x130/0x150
felix_teardown+0x3c/0xd8
dsa_tree_teardown_switches+0xbc/0xe0
dsa_unregister_switch+0x168/0x260
felix_pci_remove+0x30/0x60
pci_device_remove+0x4c/0x100
device_release_driver_internal+0x188/0x288
device_links_unbind_consumers+0xfc/0x138
device_release_driver_internal+0xe0/0x288
device_driver_detach+0x24/0x38
unbind_store+0xd8/0x108
drv_attr_store+0x30/0x50
---[ end trace 0000000000000000 ]---
------------[ cut here ]------------
RTNL: assertion failed at net/8021q/vlan_core.c (376)
WARNING: CPU: 1 PID: 329 at net/8021q/vlan_core.c:376 vlan_vid_del+0x1b8/0x1f0
CPU: 1 PID: 329 Comm: bash Tainted: G W 6.5.0-rc3+ #771
pc : vlan_vid_del+0x1b8/0x1f0
lr : vlan_vid_del+0x1b8/0x1f0
dsa_tag_8021q_unregister+0x8c/0x1a0
felix_tag_8021q_teardown+0x130/0x150
felix_teardown+0x3c/0xd8
dsa_tree_teardown_switches+0xbc/0xe0
dsa_unregister_switch+0x168/0x260
felix_pci_remove+0x30/0x60
pci_device_remove+0x4c/0x100
device_release_driver_internal+0x188/0x288
device_links_unbind_consumers+0xfc/0x138
device_release_driver_internal+0xe0/0x288
device_driver_detach+0x24/0x38
unbind_store+0xd8/0x108
drv_attr_store+0x30/0x50
DSA: tree 0 torn down
This was somewhat not so easy to spot, because "ocelot-8021q" is not the
default tagging protocol, and thus, not everyone who tests the unbinding
path may have switched to it beforehand. The default
felix_tag_npi_teardown() does not require rtnl_lock() to be held.
Fixes: 7c83a7c539ab ("net: dsa: add a second tagger for Ocelot switches based on tag_8021q")
Signed-off-by: Vladimir Oltean <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|