aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-08-10ibmvnic: Do partial reset on login failureNick Child1-6/+40
Perform a partial reset before sending a login request if any of the following are true: 1. If a previous request times out. This can be dangerous because the VIOS could still receive the old login request at any point after the timeout. Therefore, it is best to re-register the CRQ's and sub-CRQ's before retrying. 2. If the previous request returns an error that is not described in PAPR. PAPR provides procedures if the login returns with partial success or aborted return codes (section L.5.1) but other values do not have a defined procedure. Previously, these conditions just returned error from the login function rather than trying to resolve the issue. This can cause further issues since most callers of the login function are not prepared to handle an error when logging in. This improper cleanup can lead to the device being permanently DOWN'd. For example, if the VIOS believes that the device is already logged in then it will return INVALID_STATE (-7). If we never re-register CRQ's then it will always think that the device is already logged in. This leaves the device inoperable. The partial reset involves freeing the sub-CRQs, freeing the CRQ then registering and initializing a new CRQ and sub-CRQs. This essentially restarts all communication with VIOS to allow for a fresh login attempt that will be unhindered by any previous failed attempts. Fixes: dff515a3e71d ("ibmvnic: Harden device login requests") Signed-off-by: Nick Child <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-10ibmvnic: Handle DMA unmapping of login buffs in release functionsNick Child1-5/+10
Rather than leaving the DMA unmapping of the login buffers to the login response handler, move this work into the login release functions. Previously, these functions were only used for freeing the allocated buffers. This could lead to issues if there are more than one outstanding login buffer requests, which is possible if a login request times out. If a login request times out, then there is another call to send login. The send login function makes a call to the login buffer release function. In the past, this freed the buffers but did not DMA unmap. Therefore, the VIOS could still write to the old login (now freed) buffer. It is for this reason that it is a good idea to leave the DMA unmap call to the login buffers release function. Since the login buffer release functions now handle DMA unmapping, remove the duplicate DMA unmapping in handle_login_rsp(). Fixes: dff515a3e71d ("ibmvnic: Harden device login requests") Signed-off-by: Nick Child <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-10ibmvnic: Unmap DMA login rsp buffer on send login failNick Child1-1/+4
If the LOGIN CRQ fails to send then we must DMA unmap the response buffer. Previously, if the CRQ failed then the memory was freed without DMA unmapping. Fixes: c98d9cc4170d ("ibmvnic: send_login should check for crq errors") Signed-off-by: Nick Child <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-10ibmvnic: Enforce stronger sanity checks on login responseNick Child1-0/+18
Ensure that all offsets in a login response buffer are within the size of the allocated response buffer. Any offsets or lengths that surpass the allocation are likely the result of an incomplete response buffer. In these cases, a full reset is necessary. When attempting to login, the ibmvnic device will allocate a response buffer and pass a reference to the VIOS. The VIOS will then send the ibmvnic device a LOGIN_RSP CRQ to signal that the buffer has been filled with data. If the ibmvnic device does not get a response in 20 seconds, the old buffer is freed and a new login request is sent. With 2 outstanding requests, any LOGIN_RSP CRQ's could be for the older login request. If this is the case then the login response buffer (which is for the newer login request) could be incomplete and contain invalid data. Therefore, we must enforce strict sanity checks on the response buffer values. Testing has shown that the `off_rxadd_buff_size` value is filled in last by the VIOS and will be the smoking gun for these circumstances. Until VIOS can implement a mechanism for tracking outstanding response buffers and a method for mapping a LOGIN_RSP CRQ to a particular login response buffer, the best ibmvnic can do in this situation is perform a full reset. Fixes: dff515a3e71d ("ibmvnic: Harden device login requests") Signed-off-by: Nick Child <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-10net: mana: Fix MANA VF unload when hardware is unresponsiveSouradeep Chakrabarti1-4/+33
When unloading the MANA driver, mana_dealloc_queues() waits for the MANA hardware to complete any inflight packets and set the pending send count to zero. But if the hardware has failed, mana_dealloc_queues() could wait forever. Fix this by adding a timeout to the wait. Set the timeout to 120 seconds, which is a somewhat arbitrary value that is more than long enough for functional hardware to complete any sends. Cc: [email protected] Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Signed-off-by: Souradeep Chakrabarti <[email protected]> Link: https://lore.kernel.org/r/1691576525-24271-1-git-send-email-schakrabarti@linux.microsoft.com Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-10parisc: dma: Add prototype for pcxl_dma_startHelge Deller3-5/+3
Signed-off-by: Helge Deller <[email protected]>
2023-08-10parisc: parisc_ksyms: Include libgcc.h for libgcc prototypesHelge Deller1-6/+1
Signed-off-by: Helge Deller <[email protected]>
2023-08-10parisc: ucmpdi2: Fix no previous prototype for '__ucmpdi2' warningHelge Deller1-1/+2
Signed-off-by: Helge Deller <[email protected]>
2023-08-10x86: Move gds_ucode_mitigated() declaration to headerArnd Bergmann2-2/+2
The declaration got placed in the .c file of the caller, but that causes a warning for the definition: arch/x86/kernel/cpu/bugs.c:682:6: error: no previous prototype for 'gds_ucode_mitigated' [-Werror=missing-prototypes] Move it to a header where both sides can observe it instead. Fixes: 81ac7e5d74174 ("KVM: Add GDS_NO support to KVM") Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Dave Hansen <[email protected]> Tested-by: Daniel Sneddon <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/all/20230809130530.1913368-2-arnd%40kernel.org
2023-08-10x86/speculation: Add cpu_show_gds() prototypeArnd Bergmann1-0/+2
The newly added function has two definitions but no prototypes: drivers/base/cpu.c:605:16: error: no previous prototype for 'cpu_show_gds' [-Werror=missing-prototypes] Add a declaration next to the other ones for this file to avoid the warning. Fixes: 8974eb588283b ("x86/speculation: Add Gather Data Sampling mitigation") Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Dave Hansen <[email protected]> Tested-by: Daniel Sneddon <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/all/20230809130530.1913368-1-arnd%40kernel.org
2023-08-10riscv: Implement flush_cache_vmap()Alexandre Ghiti1-0/+4
The RISC-V kernel needs a sfence.vma after a page table modification: we used to rely on the vmalloc fault handling to emit an sfence.vma, but commit 7d3332be011e ("riscv: mm: Pre-allocate PGD entries for vmalloc/modules area") got rid of this path for 64-bit kernels, so now we need to explicitly emit a sfence.vma in flush_cache_vmap(). Note that we don't need to implement flush_cache_vunmap() as the generic code should emit a flush tlb after unmapping a vmalloc region. Fixes: 7d3332be011e ("riscv: mm: Pre-allocate PGD entries for vmalloc/modules area") Signed-off-by: Alexandre Ghiti <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: [email protected] Signed-off-by: Palmer Dabbelt <[email protected]>
2023-08-10riscv: Do not allow vmap pud mappings for 3-level page tableAlexandre Ghiti1-1/+3
The vmalloc_fault() path was removed and to avoid syncing the vmalloc PGD mappings, they are now preallocated. But if the kernel can use a PUD mapping (which in sv39 is actually a PGD mapping) for large vmalloc allocation, it will free the current unused preallocated PGD mapping and install a new leaf one. Since there is no sync anymore, some page tables lack this new mapping and that triggers a panic. So only allow PUD mappings for sv48 and sv57. Fixes: 7d3332be011e ("riscv: mm: Pre-allocate PGD entries for vmalloc/modules area") Signed-off-by: Alexandre Ghiti <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: [email protected] Signed-off-by: Palmer Dabbelt <[email protected]>
2023-08-10parisc: firmware: Mark pdc_result buffers localHelge Deller1-2/+2
This fixes a sparse warning which suggest to make those static. Signed-off-by: Helge Deller <[email protected]>
2023-08-10parisc: firmware: Fix sparse context imbalance warningsHelge Deller1-2/+2
Tell sparse about correct context for pdc_cpu_rendezvous_*lock() functions. Signed-off-by: Helge Deller <[email protected]>
2023-08-10parisc: signal: Fix sparse incorrect type in assignment warningHelge Deller1-1/+1
Signed-off-by: Helge Deller <[email protected]>
2023-08-10parisc: ioremap: Fix sparse warningsHelge Deller1-5/+4
Fix sparse warning: incorrect type in assignment (different base types) expected unsigned long [usertype] addr got void *addr Signed-off-by: Helge Deller <[email protected]>
2023-08-10parisc: fault: Use C99 arrary initializersHelge Deller1-25/+25
Sparse wants C99 array initializers. Signed-off-by: Helge Deller <[email protected]>
2023-08-10parisc: pdt: Use PTR_ERR_OR_ZERO() to simplify codeYang Yingliang1-3/+1
Return PTR_ERR_OR_ZERO() instead of return 0 or PTR_ERR() to simplify code. Signed-off-by: Yang Yingliang <[email protected]> Signed-off-by: Helge Deller <[email protected]>
2023-08-10parisc: Fix lightweight spinlock checks to not break futexesHelge Deller4-6/+27
The lightweight spinlock checks verify that a spinlock has either value 0 (spinlock locked) and that not any other bits than in __ARCH_SPIN_LOCK_UNLOCKED_VAL is set. This breaks the current LWS code, which writes the address of the lock into the lock word to unlock it, which was an optimization to save one assembler instruction. Fix it by making spinlock_types.h accessible for asm code, change the LWS spinlock-unlocking code to write __ARCH_SPIN_LOCK_UNLOCKED_VAL into the lock word, and add some missing lightweight spinlock checks to the LWS path. Finally, make the spinlock checks dependend on DEBUG_KERNEL. Noticed-by: John David Anglin <[email protected]> Signed-off-by: Helge Deller <[email protected]> Tested-by: John David Anglin <[email protected]> Cc: [email protected] # v6.4+ Fixes: 15e64ef6520e ("parisc: Add lightweight spinlock checks")
2023-08-10btrfs: set cache_block_group_error if we find an errorJosef Bacik1-1/+4
We set cache_block_group_error if btrfs_cache_block_group() returns an error, this is because we could end up not finding space to allocate and mistakenly return -ENOSPC, and which could then abort the transaction with the incorrect errno, and in the case of ENOSPC result in a WARN_ON() that will trip up tests like generic/475. However there's the case where multiple threads can be racing, one thread gets the proper error, and the other thread doesn't actually call btrfs_cache_block_group(), it instead sees ->cached == BTRFS_CACHE_ERROR. Again the result is the same, we fail to allocate our space and return -ENOSPC. Instead we need to set cache_block_group_error to -EIO in this case to make sure that if we do not make our allocation we get the appropriate error returned back to the caller. CC: [email protected] # 4.14+ Signed-off-by: Josef Bacik <[email protected]> Signed-off-by: David Sterba <[email protected]>
2023-08-10btrfs: reject invalid reloc tree root keys with stack dumpQu Wenruo2-1/+16
[BUG] Syzbot reported a crash that an ASSERT() got triggered inside prepare_to_merge(). That ASSERT() makes sure the reloc tree is properly pointed back by its subvolume tree. [CAUSE] After more debugging output, it turns out we had an invalid reloc tree: BTRFS error (device loop1): reloc tree mismatch, root 8 has no reloc root, expect reloc root key (-8, 132, 8) gen 17 Note the above root key is (TREE_RELOC_OBJECTID, ROOT_ITEM, QUOTA_TREE_OBJECTID), meaning it's a reloc tree for quota tree. But reloc trees can only exist for subvolumes, as for non-subvolume trees, we just COW the involved tree block, no need to create a reloc tree since those tree blocks won't be shared with other trees. Only subvolumes tree can share tree blocks with other trees (thus they have BTRFS_ROOT_SHAREABLE flag). Thus this new debug output proves my previous assumption that corrupted on-disk data can trigger that ASSERT(). [FIX] Besides the dedicated fix and the graceful exit, also let tree-checker to check such root keys, to make sure reloc trees can only exist for subvolumes. CC: [email protected] # 5.15+ Reported-by: [email protected] Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Qu Wenruo <[email protected]> Signed-off-by: David Sterba <[email protected]>
2023-08-10btrfs: exit gracefully if reloc roots don't matchQu Wenruo1-8/+37
[BUG] Syzbot reported a crash that an ASSERT() got triggered inside prepare_to_merge(). [CAUSE] The root cause of the triggered ASSERT() is we can have a race between quota tree creation and relocation. This leads us to create a duplicated quota tree in the btrfs_read_fs_root() path, and since it's treated as fs tree, it would have ROOT_SHAREABLE flag, causing us to create a reloc tree for it. The bug itself is fixed by a dedicated patch for it, but this already taught us the ASSERT() is not something straightforward for developers. [ENHANCEMENT] Instead of using an ASSERT(), let's handle it gracefully and output extra info about the mismatch reloc roots to help debug. Also with the above ASSERT() removed, we can trigger ASSERT(0)s inside merge_reloc_roots() later. Also replace those ASSERT(0)s with WARN_ON()s. CC: [email protected] # 5.15+ Reported-by: [email protected] Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Qu Wenruo <[email protected]> Signed-off-by: David Sterba <[email protected]>
2023-08-10btrfs: avoid race between qgroup tree creation and relocationQu Wenruo1-0/+10
[BUG] Syzbot reported a weird ASSERT() triggered inside prepare_to_merge(). assertion failed: root->reloc_root == reloc_root, in fs/btrfs/relocation.c:1919 ------------[ cut here ]------------ kernel BUG at fs/btrfs/relocation.c:1919! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 9904 Comm: syz-executor.3 Not tainted 6.4.0-syzkaller-08881-g533925cb7604 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023 RIP: 0010:prepare_to_merge+0xbb2/0xc40 fs/btrfs/relocation.c:1919 Code: fe e9 f5 (...) RSP: 0018:ffffc9000325f760 EFLAGS: 00010246 RAX: 000000000000004f RBX: ffff888075644030 RCX: 1481ccc522da5800 RDX: ffffc90005c09000 RSI: 00000000000364ca RDI: 00000000000364cb RBP: ffffc9000325f870 R08: ffffffff816f33ac R09: 1ffff9200064bea0 R10: dffffc0000000000 R11: fffff5200064bea1 R12: ffff888075644000 R13: ffff88803b166000 R14: ffff88803b166560 R15: ffff88803b166558 FS: 00007f4e305fd700(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000056080679c000 CR3: 00000000193ad000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> relocate_block_group+0xa5d/0xcd0 fs/btrfs/relocation.c:3749 btrfs_relocate_block_group+0x7ab/0xd70 fs/btrfs/relocation.c:4087 btrfs_relocate_chunk+0x12c/0x3b0 fs/btrfs/volumes.c:3283 __btrfs_balance+0x1b06/0x2690 fs/btrfs/volumes.c:4018 btrfs_balance+0xbdb/0x1120 fs/btrfs/volumes.c:4402 btrfs_ioctl_balance+0x496/0x7c0 fs/btrfs/ioctl.c:3604 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl+0xf8/0x170 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f4e2f88c389 [CAUSE] With extra debugging, the offending reloc_root is for quota tree (rootid 8). Normally we should not use the reloc tree for quota root at all, as reloc trees are only for subvolume trees. But there is a race between quota enabling and relocation, this happens after commit 85724171b302 ("btrfs: fix the btrfs_get_global_root return value"). Before that commit, for quota and free space tree, we exit immediately if we cannot grab it from fs_info. But now we would try to read it from disk, just as if they are fs trees, this sets ROOT_SHAREABLE flags in such race: Thread A | Thread B ---------------------------------+------------------------------ btrfs_quota_enable() | | | btrfs_get_root_ref() | | |- btrfs_get_global_root() | | | Returned NULL | | |- btrfs_lookup_fs_root() | | | Returned NULL |- btrfs_create_tree() | | | Now quota root item is | | | inserted | |- btrfs_read_tree_root() | | | Got the newly inserted quota root | | |- btrfs_init_fs_root() | | | Set ROOT_SHAREABLE flag [FIX] Get back to the old behavior by returning PTR_ERR(-ENOENT) if the target objectid is not a subvolume tree or data reloc tree. Reported-and-tested-by: [email protected] Fixes: 85724171b302 ("btrfs: fix the btrfs_get_global_root return value") Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Qu Wenruo <[email protected]> Signed-off-by: David Sterba <[email protected]>
2023-08-10btrfs: properly clear end of the unreserved range in cow_file_rangeChristoph Hellwig1-5/+5
When the call to btrfs_reloc_clone_csums in cow_file_range returns an error, we jump to the out_unlock label with the extent_reserved variable set to false. The cleanup at the label will then call extent_clear_unlock_delalloc on the range from start to end. But we've already added cur_alloc_size to start before the jump, so there might no range be left from the newly incremented start to end. Move the check for 'start < end' so that it is reached by also for the !extent_reserved case. CC: [email protected] # 6.1+ Fixes: a315e68f6e8b ("Btrfs: fix invalid attempt to free reserved space on failure to cow range") Reviewed-by: Josef Bacik <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2023-08-10btrfs: don't wait for writeback on clean pages in extent_write_cache_pagesChristoph Hellwig1-0/+6
__extent_writepage could have started on more pages than the one it was called for. This happens regularly for zoned file systems, and in theory could happen for compressed I/O if the worker thread was executed very quickly. For such pages extent_write_cache_pages waits for writeback to complete before moving on to the next page, which is highly inefficient as it blocks the flusher thread. Port over the PageDirty check that was added to write_cache_pages in commit 515f4a037fb ("mm: write_cache_pages optimise page cleaning") to fix this. CC: [email protected] # 4.14+ Reviewed-by: Josef Bacik <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2023-08-10btrfs: don't stop integrity writeback too earlyChristoph Hellwig1-3/+4
extent_write_cache_pages stops writing pages as soon as nr_to_write hits zero. That is the right thing for opportunistic writeback, but incorrect for data integrity writeback, which needs to ensure that no dirty pages are left in the range. Thus only stop the writeback for WB_SYNC_NONE if nr_to_write hits 0. This is a port of write_cache_pages changes in commit 05fe478dd04e ("mm: write_cache_pages integrity fix"). Note that I've only trigger the problem with other changes to the btrfs writeback code, but this condition seems worthwhile fixing anyway. CC: [email protected] # 4.14+ Reviewed-by: Josef Bacik <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: David Sterba <[email protected]> [ updated comment ] Signed-off-by: David Sterba <[email protected]>
2023-08-10ACPI: resource: Add IRQ override quirk for PCSpecialist Elimina Pro 16 MHans de Goede1-0/+12
The PCSpecialist Elimina Pro 16 M laptop model is a Zen laptop which needs to use the MADT IRQ settings override and which does not have an INT_SRC_OVR entry for IRQ 1 in its MADT. So this model needs a DMI quirk to enable the MADT IRQ settings override to fix its keyboard not working. Fixes: a9c4a912b7dc ("ACPI: resource: Remove "Zen" specific match and quirks") Link: https://bugzilla.kernel.org/show_bug.cgi?id=217394#c18 Cc: All applicable <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2023-08-10btrfs: wait for actual caching progress during allocationJosef Bacik2-2/+17
Recently we've been having mysterious hangs while running generic/475 on the CI system. This turned out to be something like this: Task 1 dmsetup suspend --nolockfs -> __dm_suspend -> dm_wait_for_completion -> dm_wait_for_bios_completion -> Unable to complete because of IO's on a plug in Task 2 Task 2 wb_workfn -> wb_writeback -> blk_start_plug -> writeback_sb_inodes -> Infinite loop unable to make an allocation Task 3 cache_block_group ->read_extent_buffer_pages ->Waiting for IO to complete that can't be submitted because Task 1 suspended the DM device The problem here is that we need Task 2 to be scheduled completely for the blk plug to flush. Normally this would happen, we normally wait for the block group caching to finish (Task 3), and this schedule would result in the block plug flushing. However if there's enough free space available from the current caching to satisfy the allocation we won't actually wait for the caching to complete. This check however just checks that we have enough space, not that we can make the allocation. In this particular case we were trying to allocate 9MiB, and we had 10MiB of free space, but we didn't have 9MiB of contiguous space to allocate, and thus the allocation failed and we looped. We specifically don't cycle through the FFE loop until we stop finding cached block groups because we don't want to allocate new block groups just because we're caching, so we short circuit the normal loop once we hit LOOP_CACHING_WAIT and we found a caching block group. This is normally fine, except in this particular case where the caching thread can't make progress because the DM device has been suspended. Fix this by not only waiting for free space to >= the amount of space we want to allocate, but also that we make some progress in caching from the time we start waiting. This will keep us from busy looping when the caching is taking a while but still theoretically has enough space for us to allocate from, and fixes this particular case by forcing us to actually sleep and wait for forward progress, which will flush the plug. With this fix we're no longer hanging with generic/475. CC: [email protected] # 6.1+ Reviewed-by: Boris Burkov <[email protected]> Signed-off-by: Josef Bacik <[email protected]> Signed-off-by: David Sterba <[email protected]>
2023-08-10driver core: cpu: Make cpu_show_not_affected() staticBorislav Petkov (AMD)1-8/+2
Fix a -Wmissing-prototypes warning and add the gather_data_sampling() stub macro call for real. Fixes: 0fddfe338210 ("driver core: cpu: Unify redundant silly stubs") Closes: https://lore.kernel.org/oe-kbuild-all/[email protected] Reported-by: kernel test robot <[email protected]> Signed-off-by: Borislav Petkov (AMD) <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-08-10x86/srso: Fix build breakage with the LLVM linkerNick Desaulniers1-3/+9
The assertion added to verify the difference in bits set of the addresses of srso_untrain_ret_alias() and srso_safe_ret_alias() would fail to link in LLVM's ld.lld linker with the following error: ld.lld: error: ./arch/x86/kernel/vmlinux.lds:210: at least one side of the expression must be absolute ld.lld: error: ./arch/x86/kernel/vmlinux.lds:211: at least one side of the expression must be absolute Use ABSOLUTE to evaluate the expression referring to at least one of the symbols so that LLD can evaluate the linker script. Also, add linker version info to the comment about XOR being unsupported in either ld.bfd or ld.lld until somewhat recently. Fixes: fb3bd914b3ec ("x86/srso: Add a Speculative RAS Overflow mitigation") Closes: https://lore.kernel.org/llvm/CA+G9fYsdUeNu-gwbs0+T6XHi4hYYk=Y9725-wFhZ7gJMspLDRA@mail.gmail.com/ Reported-by: Nathan Chancellor <[email protected]> Reported-by: Daniel Kolesa <[email protected]> Reported-by: Naresh Kamboju <[email protected]> Suggested-by: Sven Volkinsfeld <[email protected]> Signed-off-by: Nick Desaulniers <[email protected]> Signed-off-by: Borislav Petkov (AMD) <[email protected]> Link: https://github.com/ClangBuiltLinux/linux/issues/1907 Link: https://lore.kernel.org/r/[email protected]
2023-08-10Documentation/srso: Document IBPB aspect and fix formattingBorislav Petkov (AMD)1-27/+44
Add a note about the dependency of the User->User mitigation on the previous Spectre v2 IBPB selection. Make the layout moar pretty. Signed-off-by: Borislav Petkov (AMD) <[email protected]> Reviewed-by: Greg Kroah-Hartman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-08-10driver core: cpu: Unify redundant silly stubsBorislav Petkov (AMD)1-68/+19
Make them all a weak function, aliasing to a single function which issues the "Not affected" string. No functional changes. Suggested-by: Linus Torvalds <[email protected]> Signed-off-by: Borislav Petkov (AMD) <[email protected]> Reviewed-by: Greg Kroah-Hartman <[email protected]> Reviewed-by: Nikolay Borisov <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-08-10pinctrl: qcom: Add intr_target_width field to support increased number of ↵Ninad Naik3-3/+9
interrupt targets SA8775 and newer target have added support for an increased number of interrupt targets. To implement this change, the intr_target field, which is used to configure the interrupt target in the interrupt configuration register is increased from 3 bits to 4 bits. In accordance to these updates, a new intr_target_width member is introduced in msm_pingroup structure. This member stores the value of width of intr_target field in the interrupt configuration register. This value is used to dynamically calculate and generate mask for setting the intr_target field. By default, this mask is set to 3 bit wide, to ensure backward compatibility with the older targets. Fixes: 4b6b18559927 ("pinctrl: qcom: add the tlmm driver sa8775p platforms") Tested-by: Andrew Halaney <[email protected]> # sa8775p-ride Signed-off-by: Ninad Naik <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Reviewed-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Linus Walleij <[email protected]>
2023-08-10Documentation/hw-vuln: Unify filename specification in indexBorislav Petkov (AMD)1-7/+7
Most of the index.rst files in Documentation/ refer to other rst files without their file extension in the name. Do that here too. No functional changes. Reported-by: Linus Torvalds <[email protected]> Signed-off-by: Borislav Petkov (AMD) <[email protected]> Reviewed-by: Greg Kroah-Hartman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-08-10ALSA: hda/realtek: Switch Dell Oasis models to use SPIStefan Binding1-5/+4
All I2C Dell Oasis models using CS35L41 have been changed to use SPI. In addition, System 10280cc5 is no longer required. Fixes: de90f5165b1c ("ALSA: hda/realtek: Add support for DELL Oasis 13/14/16 laptops") Signed-off-by: Stefan Binding <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2023-08-10ALSA: hda/realtek: Add quirks for HP G11 LaptopsStefan Binding1-1/+7
These HP G11 laptops use Realtek HDA codec combined with 2xCS35L41 Amplifiers using SPI or I2C with External Boost. Laptop 103c8c26 has been removed as this has been replaced by this new series of laptops. Fixes: 3e10f6ca76c4 ("ALSA: hda/realtek: Add quirk for HP EliteBook G10 laptops") Signed-off-by: Stefan Binding <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2023-08-10drm/shmem-helper: Reset vma->vm_ops before calling dma_buf_mmap()Boris Brezillon1-0/+6
The dma-buf backend is supposed to provide its own vm_ops, but some implementation just have nothing special to do and leave vm_ops untouched, probably expecting this field to be zero initialized (this is the case with the system_heap implementation for instance). Let's reset vma->vm_ops to NULL to keep things working with these implementations. Fixes: 26d3ac3cb04d ("drm/shmem-helpers: Redirect mmap for imported dma-buf") Cc: <[email protected]> Cc: Daniel Vetter <[email protected]> Reported-by: Roman Stratiienko <[email protected]> Signed-off-by: Boris Brezillon <[email protected]> Tested-by: Roman Stratiienko <[email protected]> Reviewed-by: Thomas Zimmermann <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-08-10netfilter: nf_tables: remove busy mark and gc batch APIPablo Neira Ayuso2-142/+4
Ditch it, it has been replace it by the GC transaction API and it has no clients anymore. Signed-off-by: Pablo Neira Ayuso <[email protected]>
2023-08-10netfilter: nft_set_hash: mark set element as dead when deleting from packet pathPablo Neira Ayuso1-2/+4
Set on the NFT_SET_ELEM_DEAD_BIT flag on this element, instead of performing element removal which might race with an ongoing transaction. Enable gc when dynamic flag is set on since dynset deletion requires garbage collection after this patch. Fixes: d0a8d877da97 ("netfilter: nft_dynset: support for element deletion") Signed-off-by: Pablo Neira Ayuso <[email protected]>
2023-08-10netfilter: nf_tables: adapt set backend to use GC transaction APIPablo Neira Ayuso4-103/+173
Use the GC transaction API to replace the old and buggy gc API and the busy mark approach. No set elements are removed from async garbage collection anymore, instead the _DEAD bit is set on so the set element is not visible from lookup path anymore. Async GC enqueues transaction work that might be aborted and retried later. rbtree and pipapo set backends does not set on the _DEAD bit from the sync GC path since this runs in control plane path where mutex is held. In this case, set elements are deactivated, removed and then released via RCU callback, sync GC never fails. Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges") Fixes: 8d8540c4f5e0 ("netfilter: nft_set_rbtree: add timeout support") Fixes: 9d0982927e79 ("netfilter: nft_hash: add support for timeouts") Signed-off-by: Pablo Neira Ayuso <[email protected]>
2023-08-10netfilter: nf_tables: GC transaction API to avoid race with control planePablo Neira Ayuso2-12/+300
The set types rhashtable and rbtree use a GC worker to reclaim memory. From system work queue, in periodic intervals, a scan of the table is done. The major caveat here is that the nft transaction mutex is not held. This causes a race between control plane and GC when they attempt to delete the same element. We cannot grab the netlink mutex from the work queue, because the control plane has to wait for the GC work queue in case the set is to be removed, so we get following deadlock: cpu 1 cpu2 GC work transaction comes in , lock nft mutex `acquire nft mutex // BLOCKS transaction asks to remove the set set destruction calls cancel_work_sync() cancel_work_sync will now block forever, because it is waiting for the mutex the caller already owns. This patch adds a new API that deals with garbage collection in two steps: 1) Lockless GC of expired elements sets on the NFT_SET_ELEM_DEAD_BIT so they are not visible via lookup. Annotate current GC sequence in the GC transaction. Enqueue GC transaction work as soon as it is full. If ruleset is updated, then GC transaction is aborted and retried later. 2) GC work grabs the mutex. If GC sequence has changed then this GC transaction lost race with control plane, abort it as it contains stale references to objects and let GC try again later. If the ruleset is intact, then this GC transaction deactivates and removes the elements and it uses call_rcu() to destroy elements. Note that no elements are removed from GC lockless path, the _DEAD bit is set and pointers are collected. GC catchall does not remove the elements anymore too. There is a new set->dead flag that is set on to abort the GC transaction to deal with set->ops->destroy() path which removes the remaining elements in the set from commit_release, where no mutex is held. To deal with GC when mutex is held, which allows safe deactivate and removal, add sync GC API which releases the set element object via call_rcu(). This is used by rbtree and pipapo backends which also perform garbage collection from control plane path. Since element removal from sets can happen from control plane and element garbage collection/timeout, it is necessary to keep the set structure alive until all elements have been deactivated and destroyed. We cannot do a cancel_work_sync or flush_work in nft_set_destroy because its called with the transaction mutex held, but the aforementioned async work queue might be blocked on the very mutex that nft_set_destroy() callchain is sitting on. This gives us the choice of ABBA deadlock or UaF. To avoid both, add set->refs refcount_t member. The GC API can then increment the set refcount and release it once the elements have been free'd. Set backends are adapted to use the GC transaction API in a follow up patch entitled: ("netfilter: nf_tables: use gc transaction API in set backends") This is joint work with Florian Westphal. Fixes: cfed7e1b1f8e ("netfilter: nf_tables: add set garbage collection helpers") Signed-off-by: Pablo Neira Ayuso <[email protected]>
2023-08-09Merge tag '6.5-rc5-ksmbd-server' of git://git.samba.org/ksmbdLinus Torvalds2-6/+13
Pull smb server fixes from Steve French: "Two ksmbd server fixes, both also for stable: - improve buffer validation when multiple EAs returned - missing check for command payload size" * tag '6.5-rc5-ksmbd-server' of git://git.samba.org/ksmbd: ksmbd: fix wrong next length validation of ea buffer in smb2_set_ea() ksmbd: validate command request size
2023-08-09hwmon: (aquacomputer_d5next) Add selective 200ms delay after sending ctrl reportAleksa Savic1-1/+36
Add a 200ms delay after sending a ctrl report to Quadro, Octo, D5 Next and Aquaero to give them enough time to process the request and save the data to memory. Otherwise, under heavier userspace loads where multiple sysfs entries are usually set in quick succession, a new ctrl report could be requested from the device while it's still processing the previous one and fail with -EPIPE. The delay is only applied if two ctrl report operations are near each other in time. Reported by a user on Github [1] and tested by both of us. [1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/issues/82 Fixes: 752b927951ea ("hwmon: (aquacomputer_d5next) Add support for Aquacomputer Octo") Signed-off-by: Aleksa Savic <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2023-08-09Merge tag 'perf-tools-fixes-for-v6.5-3-2023-08-09' of ↵Linus Torvalds3-5/+6
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Revert a patch that unconditionally resolved addresses to inlines in callchains, something that was done before when DWARF mode was asked for, but could as well be done when just frame pointers (the default) was selected. This enriches the callchains with inlines but the way to resolve it is gross right now, relying on addr2line, and even if we come up with an efficient way of processing all the associated DWARF info for a big file as vmlinux is, this has to be something people opt-in, as it will still result in overheads, so revert it until we get this done in a saner way. - Update the x86 msr-index.h header with the kernel original, no change in tooling output, just addresses a tools/perf build warning. - Resolve a regression where special "tool events", such as "duration_time" were being presented for all CPUs, when it only makes sense to show it for the workload, that is, just once. * tag 'perf-tools-fixes-for-v6.5-3-2023-08-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf stat: Don't display zero tool counts tools arch x86: Sync the msr-index.h copy with the kernel sources Revert "perf report: Append inlines to non-DWARF callchains"
2023-08-10zonefs: fix synchronous direct writes to sequential filesDamien Le Moal3-118/+4
Commit 16d7fd3cfa72 ("zonefs: use iomap for synchronous direct writes") changes zonefs code from a self-built zone append BIO to using iomap for synchronous direct writes. This change relies on iomap submit BIO callback to change the write BIO built by iomap to a zone append BIO. However, this change overlooked the fact that a write BIO may be very large as it is split when issued. The change from a regular write to a zone append operation for the built BIO can result in a block layer warning as zone append BIO are not allowed to be split. WARNING: CPU: 18 PID: 202210 at block/bio.c:1644 bio_split+0x288/0x350 Call Trace: ? __warn+0xc9/0x2b0 ? bio_split+0x288/0x350 ? report_bug+0x2e6/0x390 ? handle_bug+0x41/0x80 ? exc_invalid_op+0x13/0x40 ? asm_exc_invalid_op+0x16/0x20 ? bio_split+0x288/0x350 bio_split_rw+0x4bc/0x810 ? __pfx_bio_split_rw+0x10/0x10 ? lockdep_unlock+0xf2/0x250 __bio_split_to_limits+0x1d8/0x900 blk_mq_submit_bio+0x1cf/0x18a0 ? __pfx_iov_iter_extract_pages+0x10/0x10 ? __pfx_blk_mq_submit_bio+0x10/0x10 ? find_held_lock+0x2d/0x110 ? lock_release+0x362/0x620 ? mark_held_locks+0x9e/0xe0 __submit_bio+0x1ea/0x290 ? __pfx___submit_bio+0x10/0x10 ? seqcount_lockdep_reader_access.constprop.0+0x82/0x90 submit_bio_noacct_nocheck+0x675/0xa20 ? __pfx_bio_iov_iter_get_pages+0x10/0x10 ? __pfx_submit_bio_noacct_nocheck+0x10/0x10 iomap_dio_bio_iter+0x624/0x1280 __iomap_dio_rw+0xa22/0x18a0 ? lock_is_held_type+0xe3/0x140 ? __pfx___iomap_dio_rw+0x10/0x10 ? lock_release+0x362/0x620 ? zonefs_file_write_iter+0x74c/0xc80 [zonefs] ? down_write+0x13d/0x1e0 iomap_dio_rw+0xe/0x40 zonefs_file_write_iter+0x5ea/0xc80 [zonefs] do_iter_readv_writev+0x18b/0x2c0 ? __pfx_do_iter_readv_writev+0x10/0x10 ? inode_security+0x54/0xf0 do_iter_write+0x13b/0x7c0 ? lock_is_held_type+0xe3/0x140 vfs_writev+0x185/0x550 ? __pfx_vfs_writev+0x10/0x10 ? __handle_mm_fault+0x9bd/0x1c90 ? find_held_lock+0x2d/0x110 ? lock_release+0x362/0x620 ? find_held_lock+0x2d/0x110 ? lock_release+0x362/0x620 ? __up_read+0x1ea/0x720 ? do_pwritev+0x136/0x1f0 do_pwritev+0x136/0x1f0 ? __pfx_do_pwritev+0x10/0x10 ? syscall_enter_from_user_mode+0x22/0x90 ? lockdep_hardirqs_on+0x7d/0x100 do_syscall_64+0x58/0x80 This error depends on the hardware used, specifically on the max zone append bytes and max_[hw_]sectors limits. Tests using AMD Epyc machines that have low limits did not reveal this issue while runs on Intel Xeon machines with larger limits trigger it. Manually splitting the zone append BIO using bio_split_rw() can solve this issue but also requires issuing the fragment BIOs synchronously with submit_bio_wait(), to avoid potential reordering of the zone append BIO fragments, which would lead to data corruption. That is, this solution is not better than using regular write BIOs which are subject to serialization using zone write locking at the IO scheduler level. Given this, fix the issue by removing zone append support and using regular write BIOs for synchronous direct writes. This allows preseving the use of iomap and having identical synchronous and asynchronous sequential file write path. Zone append support will be reintroduced later through io_uring commands to ensure that the needed special handling is done correctly. Reported-by: Shin'ichiro Kawasaki <[email protected]> Fixes: 16d7fd3cfa72 ("zonefs: use iomap for synchronous direct writes") Cc: [email protected] Signed-off-by: Damien Le Moal <[email protected]> Tested-by: Shin'ichiro Kawasaki <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]>
2023-08-09Merge branch 'bug fixes for sockmap'Martin KaFai Lau5-8/+101
Xu Kuohai says: ==================== bug fixes and a new test case for sockmap. v3: fix bpf ci failure v2: https://lore.kernel.org/bpf/[email protected] add a test case v1: https://lore.kernel.org/bpf/[email protected] https://lore.kernel.org/bpf/[email protected] ==================== Signed-off-by: Martin KaFai Lau <[email protected]>
2023-08-09selftests/bpf: Add sockmap test for redirecting partial skb dataXu Kuohai2-0/+86
Add a test case to check whether sockmap redirection works correctly when data length returned by stream_parser is less than skb->len. In addition, this test checks whether strp_done is called correctly. The reason is that we returns skb->len - 1 from the stream_parser, so the last byte in the skb will be held by strp->skb_head. Therefore, if strp_done is not called to free strp->skb_head, we'll get a memleak warning. Signed-off-by: Xu Kuohai <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin KaFai Lau <[email protected]>
2023-08-09selftests/bpf: fix a CI failure caused by vsock sockmap testXu Kuohai1-1/+1
BPF CI has reported the following failure: Error: #200/79 sockmap_listen/sockmap VSOCK test_vsock_redir Error: #200/79 sockmap_listen/sockmap VSOCK test_vsock_redir ./test_progs:vsock_unix_redir_connectible:1506: egress: write: Transport endpoint is not connected vsock_unix_redir_connectible:FAIL:1506 ./test_progs:vsock_unix_redir_connectible:1506: ingress: write: Transport endpoint is not connected vsock_unix_redir_connectible:FAIL:1506 ./test_progs:vsock_unix_redir_connectible:1506: egress: write: Transport endpoint is not connected vsock_unix_redir_connectible:FAIL:1506 ./test_progs:vsock_unix_redir_connectible:1514: ingress: recv() err, errno=11 vsock_unix_redir_connectible:FAIL:1514 ./test_progs:vsock_unix_redir_connectible:1518: ingress: vsock socket map failed, a != b vsock_unix_redir_connectible:FAIL:1518 ./test_progs:vsock_unix_redir_connectible:1525: ingress: want pass count 1, have 0 It’s because the recv(... MSG_DONTWAIT) syscall in the test case is called before the queued work sk_psock_backlog() in the kernel finishes executing. So the data to be read is still queued in psock->ingress_skb and cannot be read by the user program. Therefore, the non-blocking recv() reads nothing and reports an EAGAIN error. So replace recv(... MSG_DONTWAIT) with xrecv_nonblock(), which calls select() to wait for data to be readable or timeout before calls recv(). Fixes: d61bd8c1fd02 ("selftests/bpf: add a test case for vsock sockmap") Signed-off-by: Xu Kuohai <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin KaFai Lau <[email protected]>
2023-08-09bpf, sockmap: Fix bug that strp_done cannot be calledXu Kuohai2-2/+9
strp_done is only called when psock->progs.stream_parser is not NULL, but stream_parser was set to NULL by sk_psock_stop_strp(), called by sk_psock_drop() earlier. So, strp_done can never be called. Introduce SK_PSOCK_RX_ENABLED to mark whether there is strp on psock. Change the condition for calling strp_done from judging whether stream_parser is set to judging whether this flag is set. This flag is only set once when strp_init() succeeds, and will never be cleared later. Fixes: c0d95d3380ee ("bpf, sockmap: Re-evaluate proto ops when psock is removed from sockmap") Signed-off-by: Xu Kuohai <[email protected]> Reviewed-by: John Fastabend <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin KaFai Lau <[email protected]>
2023-08-09bpf, sockmap: Fix map type error in sock_map_del_linkXu Kuohai1-5/+5
sock_map_del_link() operates on both SOCKMAP and SOCKHASH, although both types have member named "progs", the offset of "progs" member in these two types is different, so "progs" should be accessed with the real map type. Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: Xu Kuohai <[email protected]> Reviewed-by: John Fastabend <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin KaFai Lau <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.