aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2010-08-20kfifo: add explicit error checking in all the examplesAndrea Righi4-51/+144
Provide a check in all the kfifo examples to validate the correct execution of each testcase. Signed-off-by: Andrea Righi <[email protected]> Acked-by: Stefani Seibold <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2010-08-20kfifo: fix a memory leak in dma exampleAndrea Righi1-3/+1
We use a dynamically allocated kfifo in the dma example, so we need to free it when unloading the module. Signed-off-by: Andrea Righi <[email protected]> Acked-by: Stefani Seibold <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2010-08-20kfifo: fix kernel BUG in dma exampleAndrea Righi1-0/+1
The scatterlist is used uninitialized in kfifo_dma_in_prepare(). This triggers the following bug if CONFIG_DEBUG_SG=y: ------------[ cut here ]------------ kernel BUG at include/linux/scatterlist.h:65! invalid opcode: 0000 [#1] PREEMPT SMP ... Call Trace: [<ffffffff810a1eab>] setup_sgl+0x6b/0xe0 [<ffffffffa03d7000>] ? example_init+0x0/0x265 [dma_example] [<ffffffff810a2021>] __kfifo_dma_in_prepare+0x21/0x30 [<ffffffffa03d7124>] example_init+0x124/0x265 [dma_example] [<ffffffff810f9c55>] ? trace_module_notify+0x25/0x370 [<ffffffff81110c6e>] ? free_pages_prepare+0x11e/0x1e0 [<ffffffff8106f2b1>] ? get_parent_ip+0x11/0x50 [<ffffffff810f9c55>] ? trace_module_notify+0x25/0x370 [<ffffffff810b65fd>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff814beade>] ? mutex_unlock+0xe/0x10 [<ffffffff810f9c71>] ? trace_module_notify+0x41/0x370 [<ffffffff810a77d5>] ? __blocking_notifier_call_chain+0x45/0x80 [<ffffffff81137b7a>] ? vfree+0x2a/0x30 [<ffffffff810a6ac3>] ? up_read+0x23/0x40 [<ffffffff810a77f5>] ? __blocking_notifier_call_chain+0x65/0x80 [<ffffffff810001e3>] do_one_initcall+0x43/0x180 [<ffffffff810c577a>] sys_init_module+0xba/0x200 [<ffffffff8103819b>] system_call_fastpath+0x16/0x1b RIP [<ffffffff810a1e31>] setup_sgl_buf+0x1a1/0x1b0 RSP <ffff88006720dc98> ---[ end trace a72b979fd3c1d3a5 ]--- Add the proper initialization to avoid the bug. Signed-off-by: Andrea Righi <[email protected]> Acked-by: Stefani Seibold <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2010-08-20kfifo: add explicit error checking in byte stream exampleAndrea Righi1-6/+27
Provide a static array of expected items that kfifo should contain at the end of the test to validate it. Signed-off-by: Andrea Righi <[email protected]> Cc: Stefani Seibold <[email protected]> Cc: Greg KH <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2010-08-20kfifo: add kfifo_skip() testcaseAndrea Righi1-0/+4
Add a testcase for kfifo_skip() to the byte stream fifo example. Signed-off-by: Andrea Righi <[email protected]> Cc: Greg KH <[email protected]> Acked-by: Stefani Seibold <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2010-08-20kfifo: implement missing __kfifo_skip_r()Andrea Righi2-0/+11
kfifo_skip() is currently broken, due to the missing of the internal helper function. Add it. Signed-off-by: Andrea Righi <[email protected]> Cc: Greg KH <[email protected]> Acked-by: Stefani Seibold <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2010-08-20matroxfb: fix incorrect use of memcpy_toio()Ondrej Zary1-2/+2
Screen is completely corrupted since 2.6.34. Bisection revealed that it's caused by commit 6175ddf06b61720 ("x86: Clean up mem*io functions."). H. Peter Anvin explained that memcpy_toio() does not copy data in 32bit chunks anymore on x86. Signed-off-by: Ondrej Zary <[email protected]> Cc: Brian Gerst <[email protected]> Cc: H. Peter Anvin <[email protected]> Cc: Petr Vandrovec <[email protected]> Cc: Jean Delvare <[email protected]> Cc: <[email protected]> [2.6.34.x, 2.6.35.x] Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2010-08-20x86, tsc, sched: Recompute cyc2ns_offset's during resume from sleep statesSuresh Siddha3-0/+42
TSC's get reset after suspend/resume (even on cpu's with invariant TSC which runs at a constant rate across ACPI P-, C- and T-states). And in some systems BIOS seem to reinit TSC to arbitrary large value (still sync'd across cpu's) during resume. This leads to a scenario of scheduler rq->clock (sched_clock_cpu()) less than rq->age_stamp (introduced in 2.6.32). This leads to a big value returned by scale_rt_power() and the resulting big group power set by the update_group_power() is causing improper load balancing between busy and idle cpu's after suspend/resume. This resulted in multi-threaded workloads (like kernel-compilation) go slower after suspend/resume cycle on core i5 laptops. Fix this by recomputing cyc2ns_offset's during resume, so that sched_clock() continues from the point where it was left off during suspend. Reported-by: Florian Pritz <[email protected]> Signed-off-by: Suresh Siddha <[email protected]> Cc: <[email protected]> # [v2.6.32+] Signed-off-by: Peter Zijlstra <[email protected]> LKML-Reference: <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2010-08-20sched: Fix rq->clock synchronization when migrating tasksPeter Zijlstra1-0/+2
sched_fork() -- we do task placement in ->task_fork_fair() ensure we update_rq_clock() so we work with current time. We leave the vruntime in relative state, so the time delay until wake_up_new_task() doesn't matter. wake_up_new_task() -- Since task_fork_fair() left p->vruntime in relative state we can safely migrate, the activate_task() on the remote rq will call update_rq_clock() and causes the clock to be synced (enough). Tested-by: Jack Daniel <[email protected]> Tested-by: Philby John <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> LKML-Reference: <1281002322.1923.1708.camel@laptop> Signed-off-by: Ingo Molnar <[email protected]>
2010-08-20makefile: not need to regenerate kernel.release file when make kernelreleaseAmerigo Wang1-2/+2
Brice reported that 'kernelrelease' has a dependence on include/config/kernel.release, causes this file to be regenerated every time when invoke it. It doesn't have to. Reported-by: Brice Goglin <[email protected]> Tested-by: Brice Goglin <[email protected]> Signed-off-by: WANG Cong <[email protected]> Signed-off-by: Michal Marek <[email protected]>
2010-08-20Merge commit 'v2.6.36-rc1' into kbuild/rc-fixesMichal Marek8479-568572/+517122
2010-08-20x86, apic: Fix apic=debug boot crashDaniel Kiper1-0/+2
Fix a boot crash when apic=debug is used and the APIC is not properly initialized. This issue appears during Xen Dom0 kernel boot but the fix is generic and the crash could occur on real hardware as well. Signed-off-by: Daniel Kiper <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: <[email protected]> # .35.x, .34.x, .33.x, .32.x LKML-Reference: <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2010-08-20ALSA: hda - Fix stream and channel-ids codec-bus wideTakashi Iwai2-14/+21
The new sticky PCM parameter introduced the delayed clean-ups of stream- and channel-id tags. In the current implementation, this check (adding dirty flag) and actual clean-ups are done only for the codec chip. However, with HD-audio architecture, multiple codecs can be on a single bus, and the controller assign stream- and channel-ids in the bus-wide. In this patch, the stream-id and channel-id are checked over all codecs connected to the corresponding bus. Together with it, the mutex is moved to struct hda_bus, as this becomes also bus-wide. Reported-and-tested-by: Stephen Warren <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2010-08-20ALSA: hda - Fix conflict of sticky PCM parameter in HDMI codecsTakashi Iwai3-36/+1
Intel and Nvidia HDMI codec drivers have own implementations of sticky PCM parameters. Now HD-audio core part already has it, thus both setups conflict. The fix is simply remove the part in patch_intelhdmi.c and patch_nvhdmi.c and simply call snd_hda_codec_setup_stream() as usual. Reported-and-tested-by: Stephen Warren <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2010-08-20drm/radeon/kms: set encoder type to DVI for HDMI on evergreenAlex Deucher1-9/+23
Fixes the pink line that shows up with some hdmi monitors. This will need to be revisited when audio support is added. Fixes: http://bugs.freedesktop.org/show_bug.cgi?id=27452 Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-08-20cifs: correction of unicode header filesIgor Druzhinin2-15/+19
This patch corrects a problem of compilation errors at removal of UNIUPR_NOLOWER definition and adds include guards to cifs_unicode.h. Signed-off-by: Igor Druzhinin <[email protected]> Acked-by: Jeff Layton <[email protected]> Signed-off-by: Steve French <[email protected]>
2010-08-19Merge branch 'master' of ↵David S. Miller24-137/+174
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-08-20drm/radeon/kms: add back missing break in info ioctlAlex Deucher1-0/+1
This seems to have gotten lost in the hyper-z merge. Noticed by legume on IRC. Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-08-20drm/radeon/kms: don't enable MSIs on AGP boardsAlex Deucher1-2/+3
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=29327 Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] Signed-off-by: Dave Airlie <[email protected]>
2010-08-20drm/radeon/kms: fix agp mode setup on cards that use pcie bridgesAlex Deucher1-1/+7
Asics that use an AGP to PCIE bridge don't have the AGP_STATUS register so just use whatever mode the host side setup. Signed-off-by: Alex Deucher <[email protected]> Cc: Jerome Glisse <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-08-19e1000e: don't check for alternate MAC addr on parts that don't support itBruce Allan3-13/+31
From: Bruce Allan <[email protected]> The alternate MAC address feature is only supported by 80003ES2LAN and 82571 LOMs as well as a couple 82571 mezzanine cards. Checking for an alternate MAC address on other parts can fail leading to the driver not able to load. This patch limits the check for an alternate MAC address to be done only for parts that support the feature. This issue has been around since support for the feature was introduced to the e1000e driver in 2.6.34. Signed-off-by: Bruce Allan <[email protected]> Reported-by: Fabio Varesano <[email protected]> Cc: [email protected] Signed-off-by: Jeff Kirsher <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-08-20drm: move dereference below checkDan Carpenter1-1/+2
"fb_helper_conn" is dereferenced before the check for NULL. It's never actually NULL here, so this is mostly to keep the static checkers happy. Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-08-20drm: fix end of loop testDan Carpenter1-1/+1
"agpmem" is never NULL here because it is the list cursor of a list_for_each_entry() list. Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-08-19e1000e: disable ASPM L1 on 82573Bruce Allan1-0/+1
On the e1000-devel mailing list, Nils Faerber reported latency issues with the 82573 LOM on a ThinkPad X60. It was found to be caused by ASPM L1; disabling it resolves the latency. The issue is present in kernels back to 2.6.34 and possibly 2.6.33. Reported-by: Nils Faerber <[email protected]> Signed-off-by: Bruce Allan <[email protected]> Cc: [email protected] Signed-off-by: Jeff Kirsher <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-08-20drm/radeon/kms: rework radeon_dp_detect() logicAlex Deucher1-10/+11
If the connector is eDP, it can only be DP, not TMDS. Always set the detected sink type. If the sink is detected as non-DP, but there is no EDID, you can still manually force the port on. If the sink type is DP and there's no DPCD, there's no way to force the monitor on since you need both ends to train the link. Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-08-20drm/radeon/kms: add missing asic callback assignment for evergreenAlex Deucher1-0/+1
Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-08-20drm/radeon/kms/DCE3+: switch pads to ddc mode when going i2cAlex Deucher1-0/+7
The pins for ddc and aux are shared so you need to switch the mode when doing ddc. The ProcessAuxChannel table already sets the pin mode to DP. This should fix unreliable ddc issues on DP ports using non-DP monitors. Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] Signed-off-by: Dave Airlie <[email protected]>
2010-08-20drm/radeon/kms/pm: bail early if nothing's changingAlex Deucher1-0/+5
If we aren't changing the power state, no need to take locks and schedule fences, etc. There seem to be lock ordering issues in the CP and fence code in some cases; see bug 29140 below. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=29140 Possibly also: https://bugzilla.kernel.org/show_bug.cgi?id=16581 Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] Signed-off-by: Dave Airlie <[email protected]>
2010-08-20drm/radeon/kms/atom: clean up dig atom handlingAlex Deucher1-62/+53
This allows the tables to be run in some additional cases where the connector info isn't necessary. Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-08-20drm/radeon/kms: DCE3/4 transmitter fixesAlex Deucher1-5/+4
- INIT action takes the actual connector type id, not the enum id - some evergreen cards have the ENABLE_OUTPUT/DISABLE_OUTPUT actions Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-08-20drm/radeon/kms: rework encoder handlingAlex Deucher7-111/+116
On most newer asics, digital encoders have two links each and they can be used independantly. As such, treat them as separate encoders otherwise the individual links will not get programmed properly at modeset time. Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-08-20drm/radeon/kms: DCE3/4 AdjustPixelPll updatesAlex Deucher1-7/+44
Add options necessary bits for: - SS on DP - SS on LVDS - set clocks right for DP - deep color on hdmi (needs additional encoder and edid work as well) Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-08-20drm/radeon: Fix stack data leakJean Delvare1-0/+2
Always zero-init a structure on the stack which is returned by a function. Otherwise you may leak random stack data from previous function calls. This fixes the following warning I was seeing: CC [M] drivers/gpu/drm/radeon/radeon_atombios.o drivers/gpu/drm/radeon/radeon_atombios.c: In function "radeon_atom_get_hpd_info_from_gpio": drivers/gpu/drm/radeon/radeon_atombios.c:261: warning: "hpd.plugged_state" is used uninitialized in this function Signed-off-by: Jean Delvare <[email protected]> Cc: David Airlie <[email protected]> Cc: Alex Deucher <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-08-20drm/radeon/kms: fix GTT/VRAM overlapping testJerome Glisse1-1/+1
GTT/VRAM overlapping test had a typo which leaded to not detecting case when vram_end > gtt_end. This patch fix the logic and should fix #16574 Signed-off-by: Jerome Glisse <[email protected]> Cc: [email protected] Signed-off-by: Dave Airlie <[email protected]>
2010-08-19x86, hotplug: Serialize CPU hotplug to avoid bringup concurrency issuesBorislav Petkov2-0/+24
When testing cpu hotplug code on 32-bit we kept hitting the "CPU%d: Stuck ??" message due to multiple cores concurrently accessing the cpu_callin_mask, among others. Since these codepaths are not protected from concurrent access due to the fact that there's no sane reason for making an already complex code unnecessarily more complex - we hit the issue only when insanely switching cores off- and online - serialize hotplugging cores on the sysfs level and be done with it. [ v2.1: fix !HOTPLUG_CPU build ] Cc: <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> LKML-Reference: <20100819181029.GC17171@aftab> Signed-off-by: H. Peter Anvin <[email protected]>
2010-08-19sparc64: Fill a missing delay slot.Mikulas Patocka1-0/+1
If the code were already aligned to 64 bytes, wr instruction would be executed twice --- once in delay slot and once in the jump target. Signed-off-by: Mikulas Patocka <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-08-19Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds4-26/+96
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: kprobes/x86: Fix the return address of multiple kretprobes perf tools: Fix build error on read only source. perf, x86: Fix Intel-nhm PMU programming errata workaround
2010-08-19mtd: nand: Fix regression in BBM detectionBrian Norris1-7/+3
Commit c7b28e25cb9beb943aead770ff14551b55fa8c79 ("mtd: nand: refactor BB marker detection") caused a regression in detection of factory-set bad block markers, especially for certain small-page NAND. This fix removes some unneeded constraints on using NAND_SMALL_BADBLOCK_POS, making the detection code more correct. This regression can be seen, for example, in Hynix HY27US081G1M and similar. Signed-off-by: Brian Norris <[email protected]> Tested-by: Michael Guntsche <[email protected]> Signed-off-by: David Woodhouse <[email protected]>
2010-08-19tracing: Fix timer tracingArjan van de Ven1-2/+6
PowerTOP would like to be able to trace timers. Unfortunately, the current timer tracing is not very useful: the actual timer function is not recorded in the trace at the start of timer execution. Although this is recorded for timer "start" time (when it gets armed), this is not useful; most timers get started early, and a tracer like PowerTOP will never see this event, but will only see the actual running of the timer. This patch just adds the function to the timer tracing; I've verified with PowerTOP that now it can get useful information about timers. Signed-off-by: Arjan van de Ven <[email protected]> Cc: [email protected] Cc: Steven Rostedt <[email protected]> Cc: Frederic Weisbecker <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: <[email protected]> # .35.x, .34.x, .33.x LKML-Reference: <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2010-08-19kprobes/x86: Fix the return address of multiple kretprobesKUMANO Syuhei1-3/+22
Fix the return address of subsequent kretprobes when multiple kretprobes are set on the same function. For example: # cd /sys/kernel/debug/tracing # echo "r:event1 sys_symlink" > kprobe_events # echo "r:event2 sys_symlink" >> kprobe_events # echo 1 > events/kprobes/enable # ln -s /tmp/foo /tmp/bar (without this patch) # cat trace ln-897 [000] 20404.133727: event1: (kretprobe_trampoline+0x0/0x4c <- sys_symlink) ln-897 [000] 20404.133747: event2: (system_call_fastpath+0x16/0x1b <- sys_symlink) (with this patch) # cat trace ln-740 [000] 13799.491076: event1: (system_call_fastpath+0x16/0x1b <- sys_symlink) ln-740 [000] 13799.491096: event2: (system_call_fastpath+0x16/0x1b <- sys_symlink) Signed-off-by: KUMANO Syuhei <[email protected]> Reviewed-by: Masami Hiramatsu <[email protected]> Cc: Frederic Weisbecker <[email protected]> Cc: Ananth N Mavinakayanahalli <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: YOSHIFUJI Hideaki <[email protected]> LKML-Reference: <1281853084.3254.11.camel@camp10-laptop> Signed-off-by: Ingo Molnar <[email protected]>
2010-08-19Merge branch 'perf/urgent' of ↵Ingo Molnar2-5/+11
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux-2.6 into perf/urgent
2010-08-19ll_temac: Fix poll implementationMichal Simek1-2/+2
Functions ll_temac_rx_irq and ll_temac_tx_irq have pointer to net_device as second parameter not pointer to temac_local. Signed-off-by: Michal Simek <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-08-19netxen: fix a race in netxen_nic_get_stats()Eric Dumazet1-2/+0
Dont clear netdev->stats, it might give transient wrong values to concurrent stat readers. Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-08-19qlnic: fix a race in qlcnic_get_stats()Eric Dumazet1-2/+0
Dont clear netdev->stats, it might give transient wrong values to concurrent stat readers. Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-08-19irda: fix a race in irlan_eth_xmit()Eric Dumazet1-1/+3
After skb is queued, its illegal to dereference it. Cache skb->len into a temporary variable. Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-08-19net: sh_eth: remove unused variableKuninori Morimoto1-1/+1
Signed-off-by: Kuninori Morimoto <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-08-19netxen: update version 4.0.74Amit Kumar Salecha1-2/+2
Signed-off-by: Amit Kumar Salecha <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-08-19netxen: fix inconsistent lock stateAmit Kumar Salecha1-4/+0
Spin lock rds_ring->lock is used in poll routine, so other users should use spin_lock_bh(). While posting rx buffers from netxen_nic_attach, rds_ring->lock is not required, so cleaning it instead of fixing it by spin_lock_bh(). Signed-off-by: Amit Kumar Salecha <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-08-19vlan: Match underlying dev carrier on vlan addPhil Oester1-1/+2
When adding a new vlan, if the underlying interface has no carrier, then the newly added vlan interface should also have no carrier. At present, this is not true - the newly added vlan is added with carrier up. Fix by checking state of real device. Signed-off-by: Phil Oester <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-08-19ibmveth: Fix opps during MTU change on an active deviceRobert Jennings1-17/+15
This fixes the following opps which can occur when trying to deallocate receive buffer pools when changing the MTU of an active ibmveth device. Oops: Kernel access of bad area, sig: 11 [#1] NIP: d000000004db00e8 LR: d000000004db00ac CTR: 0000000000591038 REGS: c00000007fff39d0 TRAP: 0300 Not tainted (2.6.36-rc1) MSR: 8000000000009032 <EE,ME,IR,DR> CR: 22248244 XER: 00000002 DAR: 0000000000000488, DSISR: 0000000042000000 TASK = c00000007c463790[6531] 'netserver' THREAD: c00000007a154000 CPU: 0 GPR00: 0000000000000000 c00000007fff3c50 d000000004dbd360 0000000000000001 GPR04: 0000000000000001 1fffffffffffffff 000000000000043c c00000007a8e9f60 GPR08: c00000007a8e9e20 0000000000000245 0000000000000488 0000000000000000 GPR12: 00000000000000c0 c000000006d70000 c00000007bfec098 c00000007bfebc2c GPR16: c00000007a157c78 0000000000000000 0000000000000001 0000000000000000 GPR20: 0000000000000001 0000000000000010 c000000000b51180 c00000007a8e9d90 GPR24: c00000007a8e9da0 c00000007a8e9580 00000000000005ea 00000000000002ff GPR28: 0000000000000004 0000000000000080 c000000000a946f8 c00000007a8e9d80 NIP [d000000004db00e8] .ibmveth_remove_buffer_from_pool+0xe8/0x130 [ibmveth] LR [d000000004db00ac] .ibmveth_remove_buffer_from_pool+0xac/0x130 [ibmveth] Call Trace: [c00000007fff3c50] [d000000004db00ac] .ibmveth_remove_buffer_from_pool+0xac/0x130 [ibmveth] (unreliable) [c00000007fff3cf0] [d000000004db31dc] .ibmveth_poll+0x30c/0x460 [ibmveth] [c00000007fff3dd0] [c00000000042c4b8] .net_rx_action+0x178/0x278 [c00000007fff3eb0] [c000000000093cf0] .__do_softirq+0x118/0x1f8 [c00000007fff3f90] [c00000000002ab3c] .call_do_softirq+0x14/0x24 [c00000007a157600] [c00000000000e3e4] .do_softirq+0xec/0x110 [c00000007a1576a0] [c000000000093394] .local_bh_enable_ip+0xb4/0xe0 [c00000007a157720] [c0000000004f0bac] ._raw_spin_unlock_bh+0x3c/0x50 [c00000007a157790] [c0000000004186e0] .release_sock+0x158/0x188 [c00000007a157840] [c000000000479660] .tcp_recvmsg+0x560/0x9b8 [c00000007a157970] [c0000000004a0d78] .inet_recvmsg+0x80/0xd8 [c00000007a157a00] [c000000000413e28] .sock_recvmsg+0x128/0x178 [c00000007a157bf0] [c0000000004164ac] .SyS_recvfrom+0xb4/0x148 [c00000007a157d70] [c000000000411f3c] .SyS_socketcall+0x274/0x360 [c00000007a157e30] [c0000000000085b4] syscall_exit+0x0/0x40 Reported-by: Rafael Camarda Silva Folco <[email protected]> Signed-off-by: Robert Jennings <[email protected]> Acked-by: Brian King <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.