| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Emitting a PSB+ can cause a CPU a slight delay. When doing timing analysis
of code with Intel PT, it is useful to know if a timing bubble was caused
by Intel PT or not. Add reporting of PSB events via perf script. PSB
events are printed with the existing itrace 'p' option which also prints
power and frequency changes. The PSB event contains the trace offset at
which the PSB occurs, to allow easy reference back to the PSB+ packets.
The PSB event timestamp is always the timestamp from the PSB+ TSC
packet, and the ip is always the address from the PSB+ FUP packet.
The code changes are non-trivial because the decoder must walk to the
PSB+ FUP address before outputting the PSB event.
Example:
$ perf record -e intel_pt/cyc,psb_period=0/u uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.046 MB perf.data ]
$ perf script --itrace=p --ns
perf 17981 [006] 25617.510820383: psb: psb offs: 0 0 [unknown] ([unknown])
perf 17981 [006] 25617.510820383: cbr: cbr: 42 freq: 4219 MHz (156%) 0 [unknown] ([unknown])
uname 17981 [006] 25617.510889753: psb: psb offs: 0xb50 7f78c12a212e __GI___tunables_init+0xee (/usr/lib/x86_64-linux-gnu/ld-2.31.so)
uname 17981 [006] 25617.510899162: psb: psb offs: 0x12d0 7f78c128af1c dl_main+0x93c (/usr/lib/x86_64-linux-gnu/ld-2.31.so)
uname 17981 [006] 25617.510939242: psb: psb offs: 0x1a50 7f78c128eefc _dl_map_object_from_fd+0x13c (/usr/lib/x86_64-linux-gnu/ld-2.31.so)
uname 17981 [006] 25617.510981274: psb: psb offs: 0x21c8 7f78c1296307 _dl_relocate_object+0x927 (/usr/lib/x86_64-linux-gnu/ld-2.31.so)
uname 17981 [006] 25617.510993034: psb: psb offs: 0x2948 7f78c12940e4 _dl_lookup_symbol_x+0x14 (/usr/lib/x86_64-linux-gnu/ld-2.31.so)
uname 17981 [006] 25617.511003871: psb: psb offs: 0x30c8 7f78c12937b3 do_lookup_x+0x2f3 (/usr/lib/x86_64-linux-gnu/ld-2.31.so)
uname 17981 [006] 25617.511019854: psb: psb offs: 0x3850 7f78c1295eed _dl_relocate_object+0x50d (/usr/lib/x86_64-linux-gnu/ld-2.31.so)
uname 17981 [006] 25617.511029015: psb: psb offs: 0x4390 7f78c12a855a strcmp+0xf6a (/usr/lib/x86_64-linux-gnu/ld-2.31.so)
uname 17981 [006] 25617.511064876: psb: psb offs: 0x4b10 0 [unknown] ([unknown])
uname 17981 [006] 25617.511080762: psb: psb offs: 0x5290 7f78c11db53d _dl_addr+0x13d (/usr/lib/x86_64-linux-gnu/libc-2.31.so)
uname 17981 [006] 25617.511086035: psb: psb offs: 0x5a08 7f78c11db538 _dl_addr+0x138 (/usr/lib/x86_64-linux-gnu/libc-2.31.so)
uname 17981 [006] 25617.511091381: psb: psb offs: 0x6190 7f78c11db534 _dl_addr+0x134 (/usr/lib/x86_64-linux-gnu/libc-2.31.so)
uname 17981 [006] 25617.511096681: psb: psb offs: 0x6910 7f78c11db4c3 _dl_addr+0xc3 (/usr/lib/x86_64-linux-gnu/libc-2.31.so)
uname 17981 [006] 25617.511119520: psb: psb offs: 0x7090 7f78c10ada5e _nl_intern_locale_data+0x12e (/usr/lib/x86_64-linux-gnu/libc-2.31.so)
uname 17981 [006] 25617.511126584: psb: psb offs: 0x7818 7f78c10ada50 _nl_intern_locale_data+0x120 (/usr/lib/x86_64-linux-gnu/libc-2.31.so)
uname 17981 [006] 25617.511132775: psb: psb offs: 0x8358 7f78c10c20c0 getenv+0xa0 (/usr/lib/x86_64-linux-gnu/libc-2.31.so)
uname 17981 [006] 25617.511134598: psb: psb offs: 0x8ad0 7f78c10ada09 _nl_intern_locale_data+0xd9 (/usr/lib/x86_64-linux-gnu/libc-2.31.so)
uname 17981 [006] 25617.511135685: psb: psb offs: 0x9258 7f78c10ada50 _nl_intern_locale_data+0x120 (/usr/lib/x86_64-linux-gnu/libc-2.31.so)
uname 17981 [006] 25617.511138322: psb: psb offs: 0x99d0 7f78c11fffd9 __strncmp_avx2+0x39 (/usr/lib/x86_64-linux-gnu/libc-2.31.so)
uname 17981 [006] 25617.511158907: psb: psb offs: 0xa150 0 [unknown] ([unknown])
Signed-off-by: Adrian Hunter <[email protected]>
Reviewed-by: Andi Kleen <[email protected]>
Cc: Jiri Olsa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The code assumed every CYC-eligible packet has a CYC packet, which is not
the case when CYC thresholds are used. Fix by checking if a CYC packet is
actually present in that case.
Fixes: 5b1dc0fd1da06 ("perf intel-pt: Add support for samples to contain IPC ratio")
Signed-off-by: Adrian Hunter <[email protected]>
Reviewed-by: Andi Kleen <[email protected]>
Cc: Jiri Olsa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The code assumed a change in cycle count means accurate IPC. That is not
correct, for example when sampling both branches and instructions, or at
a FUP packet (which is not CYC-eligible) address. Fix by using an explicit
flag to indicate when IPC can be sampled.
Fixes: 5b1dc0fd1da06 ("perf intel-pt: Add support for samples to contain IPC ratio")
Signed-off-by: Adrian Hunter <[email protected]>
Reviewed-by: Andi Kleen <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add missing CYC packet processing when walking through PSB+. This
improves the accuracy of timestamps that follow PSB+, until the next
MTC.
Fixes: 3d49807870f08 ("perf tools: Add new Intel PT packet definitions")
Signed-off-by: Adrian Hunter <[email protected]>
Reviewed-by: Andi Kleen <[email protected]>
Cc: Jiri Olsa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
When locating the DWARF module for a given address, __find_debuginfo()
requires a 'struct dso' passed via the userdata argument.
However, this field is only set in __report_module() if the module is
found in via dwfl_addrmodule(), not if it is found later via
dwfl_report_elf().
Set userdata irrespective of how the DWARF module was found, as long as
we found a module.
Fixes: bf53fc6b5f41 ("perf unwind: Fix separate debug info files when using elfutils' libdw's unwinder")
Signed-off-by: Dave Rigby <[email protected]>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=211801
Acked-by: Jan Kratochvil <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Link: https://lore.kernel.org/linux-perf-users/[email protected]/
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The DualSense features 5 player LEDs below its touchpad, which are
meant as player id indications. The LEDs are configured with a
player ID determined by an ID allocator, which assign player ids
to ps_device instances.
This patch is a combination of the following original patches
minus use of LED framework APIs:
- HID: playstation: add DualSense player LEDs support.
- HID: playstation: DualSense set LEDs to default player id.
Signed-off-by: Roderick Colenbrander <[email protected]>
Reviewed-by: Barnabás Pőcze <[email protected]>
Signed-off-by: Benjamin Tissoires <[email protected]>
|
|
The DualSense controller has a built-in microphone exposed as an
audio device over USB (or HID using Bluetooth). A dedicated
button on the controller handles mute, but software has to configure
the device to mute the audio stream.
This patch captures the mute button and schedules an output report
to mute/unmute the audio stream as well as toggle the mute LED.
Signed-off-by: Roderick Colenbrander <[email protected]>
Reviewed-by: Barnabás Pőcze <[email protected]>
Signed-off-by: Benjamin Tissoires <[email protected]>
|
|
Provide initial support for the DualSense lightbar and configure it
with a default PlayStation blue color.
Signed-off-by: Roderick Colenbrander <[email protected]>
Reviewed-by: Barnabás Pőcze <[email protected]>
Signed-off-by: Benjamin Tissoires <[email protected]>
|
|
Commit da231338ec9c0987 ("perf record: Use an eventfd to wakeup when
done") uses eventfd() to solve a rare race where the setting and
checking of 'done' which add done_fd to pollfd. When draining buffer,
revents of done_fd is 0 and evlist__filter_pollfd function returns a
non-zero value. As a result, perf record does not stop profiling.
The following simple scenarios can trigger this condition:
# sleep 10 &
# perf record -p $!
After the sleep process exits, perf record should stop profiling and exit.
However, perf record keeps running.
If pollfd revents contains only POLLERR or POLLHUP, perf record
indicates that buffer is draining and need to stop profiling. Use
fdarray_flag__nonfilterable() to set done eventfd to nonfilterable
objects, so that evlist__filter_pollfd() does not filter and check done
eventfd.
Fixes: da231338ec9c0987 ("perf record: Use an eventfd to wakeup when done")
Signed-off-by: Yang Jihong <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Tested-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexey Budankov <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Linux 5.11
Merged to resolve conflicts with RDMA rc commits
- drivers/infiniband/sw/rxe/rxe_net.c
The final logic is to call rxe_get_dev_from_net() again with the master
netdev if the packet was rx'd on a vlan. To keep the elimination of the
local variables requires a trivial edit to the code in -rc
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
If no n_latch value will be provided at driver probe then all pins will
be used as an input:
gpio->out = ~n_latch;
In that case initial state for all pins is "one":
gpio->status = gpio->out;
So if pcf857x IRQ happens with change pin value from "zero" to "one"
then we miss it, because of "one" from IRQ and "one" from initial state
leaves corresponding pin unchanged:
change = (gpio->status ^ status) & gpio->irq_enabled;
The right solution will be to read actual state at driver probe.
Cc: [email protected]
Fixes: 6e20a0a429bd ("gpio: pcf857x: enable gpio_to_irq() support")
Signed-off-by: Maxim Kiselev <[email protected]>
Signed-off-by: Bartosz Golaszewski <[email protected]>
|
|
Fix the following coccicheck warnings:
./tools/perf/util/header.c:3809:18-20: WARNING !A || A && B is
equivalent to !A || B.
Reported-by: Abaci Robot <[email protected]>
Signed-off-by: Jiapeng Chong <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Andrii Nakryiko <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: John Fastabend <[email protected]>
Cc: KP Singh <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Martin KaFai Lau <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Yonghong Song <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: http://lore.kernel.org/lkml/1612497255-87189-1-git-send-email-jiapeng.chong@linux.alibaba.com
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add JSON metrics for imx8mp DDR Perf.
Signed-off-by: Joakim Zhang <[email protected]>
Reviewed-by: John Garry <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Sascha Hauer <[email protected]> <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add JSON metrics for imx8mq DDR Perf.
Signed-off-by: Joakim Zhang <[email protected]>
Reviewed-by: John Garry <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Sascha Hauer <[email protected]> <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add JSON metrics for imx8mn DDR Perf.
Signed-off-by: Joakim Zhang <[email protected]>
Reviewed-by: John Garry <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Sascha Hauer <[email protected]> <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Fix indentation of brackets in imx8mm metrics.
Signed-off-by: Joakim Zhang <[email protected]>
Reviewed-by: John Garry <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Sascha Hauer <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This reverts commit 7c86ff9925cbc83e8a21f164a8fdc2767e03531e.
There are too many special cases for MIPS not covered by this patch.
In the end it might be better to implement single stepping in userland
than emulating it in the kernel.
Signed-off-by: Thomas Bogendoerfer <[email protected]>
|
|
The `wacom_feature_mapping` function is careful to only set the the
touch_max value a single time, but this care does not extend to the
`wacom_wac_finger_event` function. In particular, if a device sends
multiple HID_DG_CONTACTMAX items in a single feature report, the
driver will end up retaining the value of last item.
The HID descriptor for the Cintiq Companion 2 does exactly this. It
incorrectly sets a "Report Count" of 2, which will cause the driver
to process two HID_DG_CONTACTCOUNT items. The first item has the actual
count, while the second item should have been declared as a constant
zero. The constant zero is the value the driver ends up using, however,
since it is the last HID_DG_CONTACTCOUNT in the report.
Report ID (16),
Usage (Contact Count Maximum), ; Contact count maximum (55h, static value)
Report Count (2),
Logical Maximum (10),
Feature (Variable),
To address this, we add a check that the touch_max is not already set
within the `wacom_wac_finger_event` function that processes the
HID_DG_TOUCHMAX item. We emit a warning if the value is set and ignore
the updated value.
This could potentially cause problems if there is a tablet which has
a similar issue but requires the last item to be used. This is unlikely,
however, since it would have to have a different non-zero value for
HID_DG_CONTACTMAX earlier in the same report, which makes no sense
except in the case of a firmware bug. Note that cases where the
HID_DG_CONTACTMAX items are in different reports is already handled
(and similarly ignored) by `wacom_feature_mapping` as mentioned above.
Link: https://github.com/linuxwacom/input-wacom/issues/223
Fixes: 184eccd40389 ("HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report")
Signed-off-by: Jason Gerecke <[email protected]>
CC: [email protected]
Signed-off-by: Jiri Kosina <[email protected]>
|
|
Per ZBC/ZAC/ZNS specifications, write pointers may not have valid values
when zones are in full condition. However, when zonefs mounts a zoned
block device, zonefs refers write pointers to set file size even when
the zones are in full condition. This results in wrong file size. To fix
this, refer maximum file size in place of write pointers for zones in
full condition.
Signed-off-by: Shin'ichiro Kawasaki <[email protected]>
Fixes: 8dcc1a9d90c1 ("fs: New zonefs file system")
Cc: <[email protected]> # 5.6+
Signed-off-by: Damien Le Moal <[email protected]>
|
|
Static checkers complained about an off by one read overflow in
otx2_get_fecparam() and we applied two conflicting fixes for it.
Correct: b0aae0bde26f ("octeontx2: Fix condition.")
Wrong: 93efb0c65683 ("octeontx2-pf: Fix out-of-bounds read in otx2_get_fecparam()")
Revert the incorrect fix.
Fixes: 93efb0c65683 ("octeontx2-pf: Fix out-of-bounds read in otx2_get_fecparam()")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
These defines are used with set_bit() and test_bit() which take a bit
number. In other words, the code is doing:
if (BIT(BIT(1)) & pf->hw.cap_flag) {
This was done consistently so it did not cause a problem at runtime but
it's still worth fixing.
Fixes: facede8209ef ("octeontx2-pf: cn10k: Add mbox support for CN10K")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This patch populates the PCI bus info in the ethtool driver query data.
Users will be able to view PCI bus info using 'ethtool -i <interface>'.
Signed-off-by: Wong Vee Khee <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Vincent Cheng says:
====================
ptp: ptp_clockmatrix: Fix output 1 PPS alignment.
This series fixes a race condition that may result in the output clock
not aligned to internal 1 PPS clock.
Part of device initialization is to align the rising edge of output
clocks to the internal rising edge of the 1 PPS clock. If the system
APLL and DPLL are not locked when this alignment occurs, the alignment
fails and a fixed offset between the internal 1 PPS clock and the
output clock occurs.
If a clock is dynamically enabled after power-up, the output clock
also needs to be aligned to the internal 1 PPS clock.
v3:
Suggested by: Jakub Kicinski <[email protected]>
- Remove unnecessary 'err' variable
- Increase msleep()/loop accuracy by using jiffies in while()
- No empty lines between variables
- No empty lines between call and the if
- parenthesis around a == b are unnecessary
- Inconsistent \n usage in dev_()
- Remove unnecessary empty line
- Leave string format in place so static code checkers can
validate arguments
v2:
Suggested by: Richard Cochran <[email protected]>
- Added const to "char * fmt"
- Break unrelated header change into separate patch
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Code clean-up.
Signed-off-by: Vincent Cheng <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Code clean-up.
Signed-off-by: Vincent Cheng <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Code clean-up.
* Remove blank line between variable declarations.
* Remove blank line between:
err = blah(...)
if (err)
...
* Remove unnecessary blank line before/after loop constructs.
Signed-off-by: Vincent Cheng <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Code clean-up.
* Remove unnecessary \n termination from dev_*() messages.
* Remove 'char *fmt' to define strings to stay within 80 column
limit. Not needed since coding guidelines increased to
100 columns limit.
Keeping format in place allows static code checkers to
validate the arguments.
* Tighten up vertical spacing.
Signed-off-by: Vincent Cheng <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Removed unused header declarations.
Signed-off-by: Vincent Cheng <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
When enabling output using PTP_CLK_REQ_PEROUT, need to align the output
clock to the internal 1 PPS clock.
Signed-off-by: Vincent Cheng <[email protected]>
Acked-by: Richard Cochran <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Part of the device initialization aligns the rising edge of the output
clock to the internal 1 PPS clock. If the system APLL and DPLL is not
locked, then the alignment will fail and there will be a fixed offset
between the internal 1 PPS clock and the output clock.
After loading the device firmware, poll the system APLL and DPLL for
locked state prior to initialization, timing out after 2 seconds.
Signed-off-by: Vincent Cheng <[email protected]>
Acked-by: Richard Cochran <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Samuel Holland says:
====================
dwmac-sun8i cleanup and shutdown hook
These patches clean up some things I noticed while fixing suspend/resume
behavior. The first four are minor code improvements. The last one adds
a shutdown hook to minimize power consumption on boards without a PMIC.
Changes v1 to v2:
- Note the assumption of exclusive reset controller access in patch 3
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
The Ethernet MAC and PHY are usually major consumers of power on boards
which may not be able to fully power off (those with no PMIC). Powering
down the MAC and internal PHY saves power while these boards are "off".
Reviewed-by: Chen-Yu Tsai <[email protected]>
Signed-off-by: Samuel Holland <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Adjust the spacing and use an explicit "return 0" in the success path
to make the function easier to parse.
Reviewed-by: Chen-Yu Tsai <[email protected]>
Signed-off-by: Samuel Holland <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Use the appropriate function instead of reimplementing it,
and update the error message to match the code.
Reviewed-by: Chen-Yu Tsai <[email protected]>
Signed-off-by: Samuel Holland <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
sun8i_dwmac_unpower_internal_phy already checks if the PHY is powered,
so there is no need to do it again here.
Reviewed-by: Chen-Yu Tsai <[email protected]>
Signed-off-by: Samuel Holland <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This is a deinitialization function that always returned zero, and that
return value was always ignored. Have it return void instead.
Reviewed-by: Chen-Yu Tsai <[email protected]>
Signed-off-by: Samuel Holland <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Use macro pm_ptr(), this helps to avoid some ifdeffery.
Signed-off-by: Heiner Kallweit <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Add two helper functions to release one table and hooks from
the netns and netlink event path.
2) Add table ownership infrastructure, this new infrastructure allows
users to bind a table (and its content) to a process through the
netlink socket.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
We have no in-tree users, also update the sfp-phylink.rst documentation
to indicate that phy_attach_direct() is used instead of of_phy_attach().
Signed-off-by: Florian Fainelli <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Ocelot now uses include/linux/dsa/ocelot.h which makes use of
CONFIG_PACKING to pack/unpack bits into the Injection/Extraction Frame
Headers. So it needs to explicitly select it, otherwise there might be
build errors due to the missing dependency.
Fixes: 40d3f295b5fe ("net: mscc: ocelot: use common tag parsing code with DSA")
Reported-by: Naresh Kamboju <[email protected]>
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add rules to select SOF driver for Alder Lake systems if a digital
microphone or SoundWire codecs are present in the system. This is
following same rules as for older Tiger Lake systems.
Signed-off-by: Kai Vehmanen <[email protected]>
Reviewed-by: Xiuli Pan <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.12
Another quiet release in terms of features, though several of the
drivers got quite a bit of work and there were a lot of general changes
resulting from Morimoto-san's ongoing cleanup work.
- As ever, lots of hard work by Morimoto-san cleaning up the code and
making it more consistent.
- Many improvements in the Intel drivers including a wide range of
quirks and bug fixes.
- A KUnit testsuite for the topology code.
- Support for Ingenic JZ4760(B), Intel AlderLake-P, DT configured
nVidia cards, Qualcomm lpass-rx-macro and lpass-tx-macro
- Removal of obsolete SIRF prima/atlas, Txx9 and ZTE zx drivers.
|
|
|
|
|
|
2-in-1 models" from Hans de Goede <[email protected]>:
Hi All,
Here is a patch series adding quirks with device-specific settings for
4 more tablet / 2-in-1 models.
Regards,
Hans
Hans de Goede (4):
ASoC: Intel: bytcr_rt5640: Add quirk for the Estar Beauty HD MID 7316R tablet
ASoC: Intel: bytcr_rt5640: Add quirk for the Voyo Winpad A15 tablet
ASoC: Intel: bytcr_rt5651: Add quirk for the Jumper EZpad 7 tablet
ASoC: Intel: bytcr_rt5640: Add quirk for the Acer One S1002 tablet
sound/soc/intel/boards/bytcr_rt5640.c | 37 +++++++++++++++++++++++++++
sound/soc/intel/boards/bytcr_rt5651.c | 13 ++++++++++
2 files changed, 50 insertions(+)
--
2.30.1
|
|
This patch takes advantage of the new glock holder sharing feature for
resource groups. We have already introduced local resource group
locking in a previous patch, so competing accesses of local processes
are already under control.
Signed-off-by: Bob Peterson <[email protected]>
Signed-off-by: Andreas Gruenbacher <[email protected]>
|
|
Introduce a new LM_FLAG_NODE_SCOPE glock holder flag: when taking a
glock in LM_ST_EXCLUSIVE (EX) mode and with the LM_FLAG_NODE_SCOPE flag
set, the exclusive lock is shared among all local processes who are
holding the glock in EX mode and have the LM_FLAG_NODE_SCOPE flag set.
From the point of view of other nodes, the lock is still held
exclusively.
A future patch will start using this flag to improve performance with
rgrp sharing.
Signed-off-by: Bob Peterson <[email protected]>
Signed-off-by: Andreas Gruenbacher <[email protected]>
|
|
Prepare for treating resource group glocks as exclusive among nodes but
shared among all tasks running on a node: introduce another layer of
node-specific locking that the local tasks can use to coordinate their
accesses.
Signed-off-by: Andreas Gruenbacher <[email protected]>
|
|
Add a rs_reserved field to struct gfs2_blkreserv to keep track of the number of
blocks reserved by this particular reservation, and a rd_reserved field to
struct gfs2_rgrpd to keep track of the total number of reserved blocks in the
resource group. Those blocks are exclusively reserved, as opposed to the
rs_requested / rd_requested blocks which are tracked in the reservation tree
(rd_rstree) and which can be stolen if necessary.
When making a reservation with gfs2_inplace_reserve, rs_reserved is set to
somewhere between ap->min_target and ap->target depending on the number of free
blocks in the resource group. When allocating blocks with gfs2_alloc_blocks,
rs_reserved is decremented accordingly. Eventually, any reserved but not
consumed blocks are returned to the resource group by gfs2_inplace_release.
Signed-off-by: Andreas Gruenbacher <[email protected]>
|
|
We keep track of what we've so far been referring to as reservations in
rd_rstree: the nodes in that tree indicate where in a resource group we'd
like to allocate the next couple of blocks for a particular inode. Local
processes take those as hints, but they may still "steal" blocks from those
extents, so when actually allocating a block, we must double check in the
bitmap whether that block is actually still free. Likewise, other cluster
nodes may "steal" such blocks as well.
One of the following patches introduces resource group glock sharing, i.e.,
sharing of an exclusively locked resource group glock among local processes to
speed up allocations. To make that work, we'll need to keep track of how many
blocks we've actually reserved for each inode, so we end up with two different
kinds of reservations.
Distinguish these two kinds by referring to blocks which are reserved but may
still be "stolen" as "requested". This rename also makes it more obvious that
rs_requested and rd_requested are strongly related.
Signed-off-by: Andreas Gruenbacher <[email protected]>
|