| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Make intel_pstate expose the ->adjust_perf() callback when it
operates in the passive mode with HWP enabled which causes the
schedutil governor to use that callback instead of ->fast_switch().
The minimum and target performance-level values passed by the
governor to ->adjust_perf() are converted to HWP.REQ.MIN and
HWP.REQ.DESIRED, respectively, which allows the processor to
adjust its configuration to maximize energy-efficiency while
providing sufficient capacity.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Acked-by: Srinivas Pandruvada <[email protected]>
Acked-by: Viresh Kumar <[email protected]>
|
|
First off, some cpufreq drivers (eg. intel_pstate) can pass hints
beyond the current target frequency to the hardware and there are no
provisions for doing that in the cpufreq framework. In particular,
today the driver has to assume that it should not allow the frequency
to fall below the one requested by the governor (or the required
capacity may not be provided) which may not be the case and which may
lead to excessive energy usage in some scenarios.
Second, the hints passed by these drivers to the hardware need not be
in terms of the frequency, so representing the utilization numbers
coming from the scheduler as frequency before passing them to those
drivers is not really useful.
Address the two points above by adding a special-purpose replacement
for the ->fast_switch callback, called ->adjust_perf, allowing the
governor to pass abstract performance level (rather than frequency)
values for the minimum (required) and target (desired) performance
along with the CPU capacity to compare them to.
Also update the schedutil governor to use the new callback instead
of ->fast_switch if present and if the utilization mertics are
frequency-invariant (that is requisite for the direct mapping
between the utilization and the CPU performance levels to be a
reasonable approximation).
Signed-off-by: Rafael J. Wysocki <[email protected]>
Acked-by: Viresh Kumar <[email protected]>
|
|
Instead of passing util and max between functions while computing the
utilization and capacity, store the former in struct sg_cpu (along
with the latter and bw_dl).
This will allow the current utilization value to be compared with the
one obtained previously (which is requisite for some code changes to
follow this one), but also it causes the code to look slightly more
consistent and cleaner.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Acked-by: Viresh Kumar <[email protected]>
|
|
The cppc_cpudata per-cpu storage was inefficient (1) additional to causing
functional issues (2) when CPUs are hotplugged out, due to per-cpu data
being improperly initialised.
(1) The amount of information needed for CPPC performance control in its
cpufreq driver depends on the domain (PSD) coordination type:
ANY: One set of CPPC control and capability data (e.g desired
performance, highest/lowest performance, etc) applies to all
CPUs in the domain.
ALL: Same as ANY. To be noted that this type is not currently
supported. When supported, information about which CPUs
belong to a domain is needed in order for frequency change
requests to be sent to each of them.
HW: It's necessary to store CPPC control and capability
information for all the CPUs. HW will then coordinate the
performance state based on their limitations and requests.
NONE: Same as HW. No HW coordination is expected.
Despite this, the previous initialisation code would indiscriminately
allocate memory for all CPUs (all_cpu_data) and unnecessarily
duplicate performance capabilities and the domain sharing mask and type
for each possible CPU.
(2) With the current per-cpu structure, when having ANY coordination,
the cppc_cpudata cpu information is not initialised (will remain 0)
for all CPUs in a policy, other than policy->cpu. When policy->cpu is
hotplugged out, the driver will incorrectly use the uninitialised (0)
value of the other CPUs when making frequency changes. Additionally,
the previous values stored in the perf_ctrls.desired_perf will be
lost when policy->cpu changes.
Therefore replace the array of per cpu data with a list. The memory for
each structure is allocated at policy init, where a single structure
can be allocated per policy, not per cpu. In order to accommodate the
struct list_head node in the cppc_cpudata structure, the now unused cpu
and cur_policy variables are removed.
For example, on a arm64 Juno platform with 6 CPUs: (0, 1, 2, 3) in PSD1,
(4, 5) in PSD2 - ANY coordination, the memory allocation comparison shows:
Before patch:
- ANY coordination:
total slack req alloc/free caller
0 0 0 0/1 _kernel_size_le_hi32+0x0xffff800008ff7810
0 0 0 0/6 _kernel_size_le_hi32+0x0xffff800008ff7808
128 80 48 1/0 _kernel_size_le_hi32+0x0xffff800008ffc070
768 0 768 6/0 _kernel_size_le_hi32+0x0xffff800008ffc0e4
After patch:
- ANY coordination:
total slack req alloc/free caller
256 0 256 2/0 _kernel_size_le_hi32+0x0xffff800008fed410
0 0 0 0/2 _kernel_size_le_hi32+0x0xffff800008fed274
Additional notes:
- A pointer to the policy's cppc_cpudata is stored in policy->driver_data
- Driver registration is skipped if _CPC entries are not present.
Signed-off-by: Ionela Voinescu <[email protected]>
Tested-by: Mian Yousaf Kaukab <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Use the existing sysfs attribute "freqdomain_cpus" to expose
information to userspace about CPUs in the same frequency domain.
Signed-off-by: Ionela Voinescu <[email protected]>
Acked-by: Viresh Kumar <[email protected]>
Tested-by: Mian Yousaf Kaukab <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
The previous coordination type handling in the cppc_cpufreq init code
created some confusion: the comment mentioned "Support only SW_ANY for
now" while only the SW_ALL/ALL case resulted in a failure. The other
coordination types (HW_ALL/HW, NONE) were silently supported.
Clarify support for coordination types while describing in comments the
intended behavior.
Signed-off-by: Ionela Voinescu <[email protected]>
Acked-by: Viresh Kumar <[email protected]>
Tested-by: Mian Yousaf Kaukab <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Considering only the currently supported coordination types (ANY, HW,
NONE), this change only makes a difference for the ANY type, when
policy->cpu is hotplugged out. In that case the new policy->cpu will
be different from ((struct cppc_cpudata *)policy->driver_data)->cpu.
While in this case the controls of *ANY* CPU could be used to drive
frequency changes, it's more consistent to use policy->cpu as the
leading CPU, as used in all other cppc_cpufreq functions. Additionally,
the debug prints in cppc_set_perf() would no longer create confusion
when referring to a CPU that is hotplugged out.
Signed-off-by: Ionela Voinescu <[email protected]>
Acked-by: Viresh Kumar <[email protected]>
Tested-by: Mian Yousaf Kaukab <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
|
|
For errors parsing the _PSD domains, a separate domain is returned for
each CPU in the failed _PSD domain with no coordination (as per previous
comment). But contrary to the intention, the code was setting
CPUFREQ_SHARED_TYPE_ALL as coordination type.
Change shared_type to CPUFREQ_SHARED_TYPE_NONE in case of errors parsing
the domain information. The function still returns the error and the caller
is free to bail out the domain initialisation altogether in that case.
Given that both functions return domains with a single CPU, this change
does not affect the functionality, but clarifies the intention.
Signed-off-by: Ionela Voinescu <[email protected]>
Acked-by: Viresh Kumar <[email protected]>
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull ARM cpufreq updates for 5.11-rc1 from Viresh Kumar:
"This contains the following updates:
- Fix imx's NVMEM_IMX_OCOTP dependency (Arnd Bergmann).
- Add support for mt8167 and blacklist mt8516 (Fabien Parent).
- Some ->get() callback related cleanups to the tegra194 driver and
some optimizations in tegra186 driver (Jon Hunter and Sumit Gupta).
- Power scale improvements to arm_scmi driver (Lukasz Luba).
- Add missing MODULE_DEVICE_TABLE and MODULE_ALIAS to several drivers
(Pali Rohár).
- Fix error path in mediatek driver (Qinglang Miao).
- Fix memleak in ST's cpufreq driver (Yangtao Li)."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: (22 commits)
cpufreq: arm_scmi: Discover the power scale in performance protocol
firmware: arm_scmi: Add power_scale_mw_get() interface
cpufreq: tegra194: Rename tegra194_get_speed_common function
cpufreq: tegra194: Remove unnecessary frequency calculation
cpufreq: tegra186: Simplify cluster information lookup
cpufreq: tegra186: Fix sparse 'incorrect type in assignment' warning
cpufreq: imx: fix NVMEM_IMX_OCOTP dependency
cpufreq: vexpress-spc: Add missing MODULE_ALIAS
cpufreq: scpi: Add missing MODULE_ALIAS
cpufreq: loongson1: Add missing MODULE_ALIAS
cpufreq: sun50i: Add missing MODULE_DEVICE_TABLE
cpufreq: st: Add missing MODULE_DEVICE_TABLE
cpufreq: qcom: Add missing MODULE_DEVICE_TABLE
cpufreq: mediatek: Add missing MODULE_DEVICE_TABLE
cpufreq: highbank: Add missing MODULE_DEVICE_TABLE
cpufreq: ap806: Add missing MODULE_DEVICE_TABLE
cpufreq: mediatek: add missing platform_driver_unregister() on error in mtk_cpufreq_driver_init
cpufreq: tegra194: get consistent cpuinfo_cur_freq
cpufreq: blacklist mt8516 in cpufreq-dt-platdev
cpufreq: mediatek: Add support for mt8167
...
|
|
Make cpufreq_online() return negative error codes on all errors that
cause the policy to be destroyed, as appropriate.
Signed-off-by: Wang ShaoBo <[email protected]>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Fix up the remaining kerneldoc comments that don't adhere to the
expected format and clarify some of them a bit.
No functional changes.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Acked-by: Viresh Kumar <[email protected]>
|
|
local_clock() has better precision and accuracy as compared to jiffies,
lets use it for time management in cpufreq stats.
Signed-off-by: Viresh Kumar <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Rearrange a conditional to make it more straightforward.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Acked-by: Viresh Kumar <[email protected]>
|
|
Avoid doing the same assignment in both branches of a conditional,
do it after the whole conditional instead.
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
|
|
|
|
Add mechanism to discover the power scale present in the performance
protocol for all domains. Provide this information to Energy Model,
which then can be checked in other frameworks, e.g. thermal.
Suggested-by: Morten Rasmussen <[email protected]>
Signed-off-by: Lukasz Luba <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
|
|
Add a new interface to the existing perf_ops and export the information
about the power values scale.
This would be used by the cpufreq driver and Energy Model framework to
set the performance domains scale: milli-Watts or abstract scale.
Suggested-by: Morten Rasmussen <[email protected]>
Reviewed-by: Cristian Marussi <[email protected]>
Signed-off-by: Lukasz Luba <[email protected]>
Acked-by: Sudeep Holla <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
|
|
The function tegra194_get_speed_common() uses hardware timers to
calculate the current CPUFREQ and so rename this function to be
tegra194_calculate_speed() to reflect what it does.
Signed-off-by: Jon Hunter <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
|
|
The Tegra194 CPUFREQ driver sets the CPUFREQ_NEED_INITIAL_FREQ_CHECK
flag which means that the CPUFREQ framework will call the 'get' callback
on boot to determine the current frequency of the CPUs. Therefore, it is
not necessary for the Tegra194 CPUFREQ driver to internally call the
tegra194_get_speed_common() during initialisation to query the current
frequency as well. Fix this by removing the call to the
tegra194_get_speed_common() during initialisation and simplify the code.
Signed-off-by: Jon Hunter <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
|
|
The CPUFREQ driver framework references each individual CPUs when
getting and setting the speed. Tegra186 has 3 clusters of A57 CPUs and
1 cluster of Denver CPUs. Hence, the Tegra186 CPUFREQ driver need to
know which cluster a given CPU belongs to. The logic in the Tegra186
driver can be greatly simplified by storing the cluster ID associated
with each CPU in the tegra186_cpufreq_cpu structure. This allow us to
completely remove the Tegra cluster info structure from the driver and
simplifiy the code.
Signed-off-by: Jon Hunter <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
|
|
Sparse warns that the incorrect type is being assigned to the CPUFREQ
driver_data variable in the Tegra186 CPUFREQ driver. The Tegra186
CPUFREQ driver is assigned a type of 'void __iomem *' to a pointer of
type 'void *' ...
drivers/cpufreq/tegra186-cpufreq.c:72:37: sparse: sparse: incorrect
type in assignment (different address spaces) @@
expected void *driver_data @@ got void [noderef] __iomem * @@
...
drivers/cpufreq/tegra186-cpufreq.c:87:40: sparse: sparse: incorrect
type in initializer (different address spaces) @@
expected void [noderef] __iomem *edvd_reg @@ got void *driver_data @@
The Tegra186 CPUFREQ driver is using the policy->driver_data variable to
store and iomem pointer to a Tegra186 CPU register that is used to set
the clock speed for the CPU. This is not necessary because the register
base address is already stored in the driver data and the offset of the
register for each CPU is static. Therefore, fix this by adding a new
structure with the register offsets for each CPU and store this in the
main driver data structure along with the register base address. Please
note that a new structure has been added for storing the register
offsets rather than a simple array, because this will permit further
clean-ups and simplification of the driver.
Signed-off-by: Jon Hunter <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
|
|
A driver should not 'select' drivers from another subsystem.
If NVMEM is disabled, this one results in a warning:
WARNING: unmet direct dependencies detected for NVMEM_IMX_OCOTP
Depends on [n]: NVMEM [=n] && (ARCH_MXC [=y] || COMPILE_TEST [=y]) && HAS_IOMEM [=y]
Selected by [y]:
- ARM_IMX6Q_CPUFREQ [=y] && CPU_FREQ [=y] && (ARM || ARM64 [=y]) && ARCH_MXC [=y] && REGULATOR_ANATOP [=y]
Change the 'select' to 'depends on' to prevent it from going wrong,
and allow compile-testing without that driver, since it is only
a runtime dependency.
Fixes: 2782ef34ed23 ("cpufreq: imx: Select NVMEM_IMX_OCOTP")
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
|
|
This patch adds missing MODULE_ALIAS for automatic loading of this cpufreq
driver when it is compiled as an external module.
Signed-off-by: Pali Rohár <[email protected]>
Fixes: 47ac9aa165540 ("cpufreq: arm_big_little: add vexpress SPC interface driver")
Signed-off-by: Viresh Kumar <[email protected]>
|
|
This patch adds missing MODULE_ALIAS for automatic loading of this cpufreq
driver when it is compiled as an external module.
Signed-off-by: Pali Rohár <[email protected]>
Fixes: 8def31034d033 ("cpufreq: arm_big_little: add SCPI interface driver")
Signed-off-by: Viresh Kumar <[email protected]>
|
|
This patch adds missing MODULE_ALIAS for automatic loading of this cpufreq
driver when it is compiled as an external module.
Signed-off-by: Pali Rohár <[email protected]>
Fixes: a0a22cf14472f ("cpufreq: Loongson1: Add cpufreq driver for Loongson1B")
Signed-off-by: Viresh Kumar <[email protected]>
|
|
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this cpufreq driver when it is
compiled as an external module.
Signed-off-by: Pali Rohár <[email protected]>
Fixes: f328584f7bff8 ("cpufreq: Add sun50i nvmem based CPU scaling driver")
Reviewed-by: Yangtao Li <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
|
|
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this cpufreq driver when it is
compiled as an external module.
Signed-off-by: Pali Rohár <[email protected]>
Fixes: ab0ea257fc58d ("cpufreq: st: Provide runtime initialised driver for ST's platforms")
Signed-off-by: Viresh Kumar <[email protected]>
|
|
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this cpufreq driver when it is
compiled as an external module.
Signed-off-by: Pali Rohár <[email protected]>
Fixes: 46e2856b8e188 ("cpufreq: Add Kryo CPU scaling driver")
Signed-off-by: Viresh Kumar <[email protected]>
|
|
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this cpufreq driver when it is
compiled as an external module.
Signed-off-by: Pali Rohár <[email protected]>
Fixes: 501c574f4e3a5 ("cpufreq: mediatek: Add support of cpufreq to MT2701/MT7623 SoC")
Signed-off-by: Viresh Kumar <[email protected]>
|
|
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this cpufreq driver when it is
compiled as an external module.
Signed-off-by: Pali Rohár <[email protected]>
Fixes: 6754f556103be ("cpufreq / highbank: add support for highbank cpufreq")
Signed-off-by: Viresh Kumar <[email protected]>
|
|
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this cpufreq driver when it is
compiled as an external module.
Signed-off-by: Pali Rohár <[email protected]>
Fixes: f525a670533d9 ("cpufreq: ap806: add cpufreq driver for Armada 8K")
Signed-off-by: Viresh Kumar <[email protected]>
|
|
mtk_cpufreq_driver_init
Add the missing platform_driver_unregister() before return from
mtk_cpufreq_driver_init in the error handling case when failed
to register mtk-cpufreq platform device
Signed-off-by: Qinglang Miao <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
|
|
Frequency returned by 'cpuinfo_cur_freq' using counters is not fixed
and keeps changing slightly. This change returns a consistent value
from freq_table. If the reconstructed frequency has acceptable delta
from the last written value, then return the frequency corresponding
to the last written ndiv value from freq_table. Otherwise, print a
warning and return the reconstructed freq.
Signed-off-by: Sumit Gupta <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
|
|
Add MT8516 to cpufreq-dt-platdev blacklist since the actual scaling is
handled by the 'mediatek-cpufreq' driver.
Signed-off-by: Fabien Parent <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
|
|
Add compatible string for mediatek mt8167
Signed-off-by: Fabien Parent <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
|
|
Use dev_pm_opp_put_prop_name() to avoid mem leak, which free opp_table.
Signed-off-by: Yangtao Li <[email protected]>
Signed-off-by: Yangtao Li <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
|
|
'shared_cpu_map', stored as part of the per-processor
acpi_processor_performance structre, is used to store CPUs that share
a performance domain. By definition it contains the owning CPU.
While building the 'shared_cpu_map' it is being set twice - once while
initialising the performance domains and again when matching CPUs
belonging to the same domain.
Drop the unnecessary initialisation.
Signed-off-by: Punit Agrawal <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull SCMI cpufreq driver fix for 5.10-rc6 from Viresh Kumar:
"This fixes a build issues with SCMI cpufreq driver in the
!CONFIG_COMMON_CLK case."
* 'cpufreq/arm/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: scmi: Fix build for !CONFIG_COMMON_CLK
|
|
Commit 8410e7f3b31e ("cpufreq: scmi: Fix OPP addition failure with a
dummy clock provider") registers a dummy clock provider using
devm_of_clk_add_hw_provider. These *_hw_provider functions are defined
only when CONFIG_COMMON_CLK=y. One possible fix is to add the Kconfig
dependency, but since we plan to move away from the clock dependency
for scmi cpufreq, it is preferrable to avoid that.
Let us just conditionally compile out the offending call to
devm_of_clk_add_hw_provider. It also uses the variable 'dev' outside
of the #ifdef block to avoid build warning.
Fixes: 8410e7f3b31e ("cpufreq: scmi: Fix OPP addition failure with a dummy clock provider")
Cc: Rafael J. Wysocki <[email protected]>
Cc: Viresh Kumar <[email protected]>
Signed-off-by: Sudeep Holla <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- Various functionality / regression fixes for Logitech devices from
Hans de Goede
- Fix for (recently added) GPIO support in mcp2221 driver from Lars
Povlsen
- Power management handling fix/quirk in i2c-hid driver for certain
BIOSes that have strange aproach to power-cycle from Hans de Goede
- a few device ID additions and device-specific quirks
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: logitech-dj: Fix Dinovo Mini when paired with a MX5x00 receiver
HID: logitech-dj: Fix an error in mse_bluetooth_descriptor
HID: Add Logitech Dinovo Edge battery quirk
HID: logitech-hidpp: Add HIDPP_CONSUMER_VENDOR_KEYS quirk for the Dinovo Edge
HID: logitech-dj: Handle quad/bluetooth keyboards with a builtin trackpad
HID: add HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE for Gamevice devices
HID: mcp2221: Fix GPIO output handling
HID: hid-sensor-hub: Fix issue with devices with no report ID
HID: i2c-hid: Put ACPI enumerated devices in D3 on shutdown
HID: add support for Sega Saturn
HID: cypress: Support Varmilo Keyboards' media hotkeys
HID: ite: Replace ABS_MISC 120/121 events with touchpad on/off keypresses
HID: logitech-hidpp: Add PID for MX Anywhere 2
HID: uclogic: Add ID for Trust Flex Design Tablet
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
"A couple of scheduler fixes:
- Make the conditional update of the overutilized state work
correctly by caching the relevant flags state before overwriting
them and checking them afterwards.
- Fix a data race in the wakeup path which caused loadavg on ARM64
platforms to become a random number generator.
- Fix the ordering of the iowaiter accounting operations so it can't
be decremented before it is incremented.
- Fix a bug in the deadline scheduler vs. priority inheritance when a
non-deadline task A has inherited the parameters of a deadline task
B and then blocks on a non-deadline task C.
The second inheritance step used the static deadline parameters of
task A, which are usually 0, instead of further propagating task
B's parameters. The zero initialized parameters trigger a bug in
the deadline scheduler"
* tag 'sched-urgent-2020-11-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/deadline: Fix priority inheritance with multiple scheduling classes
sched: Fix rq->nr_iowait ordering
sched: Fix data-race in wakeup
sched/fair: Fix overutilized update in enqueue_task_fair()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fix from Thomas Gleixner:
"A single fix for the x86 perf sysfs interfaces which used kobject
attributes instead of device attributes and therefore making clang's
control flow integrity checker upset"
* tag 'perf-urgent-2020-11-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86: fix sysfs type mismatches
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Thomas Gleixner:
"A single fix for lockdep which makes the recursion protection cover
graph lock/unlock"
* tag 'locking-urgent-2020-11-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
lockdep: Put graph lock/unlock under lock_recursion protection
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Borislav Petkov:
"Forwarded EFI fixes from Ard Biesheuvel:
- fix memory leak in efivarfs driver
- fix HYP mode issue in 32-bit ARM version of the EFI stub when built
in Thumb2 mode
- avoid leaking EFI pgd pages on allocation failure"
* tag 'efi-urgent-for-v5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/x86: Free efi_pgd with free_pages()
efivarfs: fix memory leak in efivarfs_create()
efi/arm: set HSCTLR Thumb2 bit correctly for HVC calls from HYP
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- An IOMMU VT-d build fix when CONFIG_PCI_ATS=n along with a revert of
same because the proper one is going through the IOMMU tree (Thomas
Gleixner)
- An Intel microcode loader fix to save the correct microcode patch to
apply during resume (Chen Yu)
- A fix to not access user memory of other processes when dumping
opcode bytes (Thomas Gleixner)
* tag 'x86_urgent_for_v5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "iommu/vt-d: Take CONFIG_PCI_ATS into account"
x86/dumpstack: Do not try to access user space code of other tasks
x86/microcode/intel: Check patch signature before saving microcode for early loading
iommu/vt-d: Take CONFIG_PCI_ATS into account
|
|
Merge misc fixes from Andrew Morton:
"8 patches.
Subsystems affected by this patch series: mm (madvise, pagemap,
readahead, memcg, userfaultfd), kbuild, and vfs"
* emailed patches from Andrew Morton <[email protected]>:
mm: fix madvise WILLNEED performance problem
libfs: fix error cast of negative value in simple_attr_write()
mm/userfaultfd: do not access vma->vm_mm after calling handle_userfault()
mm: memcg/slab: fix root memcg vmstats
mm: fix readahead_page_batch for retry entries
mm: fix phys_to_target_node() and memory_add_physaddr_to_nid() exports
compiler-clang: remove version check for BPF Tracing
mm/madvise: fix memory leak from process_madvise
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging and IIO fixes from Greg KH:
"Here are some small Staging and IIO driver fixes for 5.10-rc5. They
include:
- IIO fixes for reported regressions and problems
- new device ids for IIO drivers
- new device id for rtl8723bs driver
- staging ralink driver Kconfig dependency fix
- staging mt7621-pci bus resource fix
All of these have been in linux-next all week with no reported issues"
* tag 'staging-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: accel: kxcjk1013: Add support for KIOX010A ACPI DSM for setting tablet-mode
iio: accel: kxcjk1013: Replace is_smo8500_device with an acpi_type enum
docs: ABI: testing: iio: stm32: remove re-introduced unsupported ABI
iio: light: fix kconfig dependency bug for VCNL4035
iio/adc: ingenic: Fix AUX/VBAT readings when touchscreen is used
iio/adc: ingenic: Fix battery VREF for JZ4770 SoC
staging: rtl8723bs: Add 024c:0627 to the list of SDIO device-ids
staging: ralink-gdma: fix kconfig dependency bug for DMA_RALINK
staging: mt7621-pci: avoid to request pci bus resources
iio: imu: st_lsm6dsx: set 10ms as min shub slave timeout
counter/ti-eqep: Fix regmap max_register
iio: adc: stm32-adc: fix a regression when using dma and irq
iio: adc: mediatek: fix unset field
iio: cros_ec: Use default frequencies when EC returns invalid information
|