aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-11-19Merge tag 'regulator-fix-v5.10-rc4' of ↵Linus Torvalds3-24/+44
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "Mostly core fixes here, one set from Michał Mirosław which cleans up some issues introduced as part of the coupled regulators work, one memory leak during probe and two due to regulators which have an input supply name and regulator name which are identical, which is very unusual. There's also a fix for our handling of the similarly unusual case where we can't determine if a regulator is enabled during boot" * tag 'regulator-fix-v5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: ti-abb: Fix array out of bound read access on the first transition regulator: workaround self-referent regulators regulator: avoid resolve_supply() infinite recursion regulator: fix memory leak with repeated set_machine_constraints() regulator: pfuze100: limit pfuze-support-disable-sw to pfuze{100,200} regulator: core: don't disable regulator if is_enabled return error.
2020-11-19ipv6: Remove dependency of ipv6_frag_thdr_truncated on ipv6 moduleGeorg Kohmann4-33/+32
IPV6=m NF_DEFRAG_IPV6=y ld: net/ipv6/netfilter/nf_conntrack_reasm.o: in function `nf_ct_frag6_gather': net/ipv6/netfilter/nf_conntrack_reasm.c:462: undefined reference to `ipv6_frag_thdr_truncated' Netfilter is depending on ipv6 symbol ipv6_frag_thdr_truncated. This dependency is forcing IPV6=y. Remove this dependency by moving ipv6_frag_thdr_truncated out of ipv6. This is the same solution as used with a similar issues: Referring to commit 70b095c843266 ("ipv6: remove dependency of nf_defrag_ipv6 on ipv6 module") Fixes: 9d9e937b1c8b ("ipv6/netfilter: Discard first fragment not including all headers") Reported-by: Randy Dunlap <[email protected]> Reported-by: kernel test robot <[email protected]> Signed-off-by: Georg Kohmann <[email protected]> Acked-by: Pablo Neira Ayuso <[email protected]> Acked-by: Randy Dunlap <[email protected]> # build-tested Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-19Merge tag 'thermal-v5.10-rc5' of ↵Linus Torvalds1-2/+16
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal fix from Daniel Lezcano: "Disable the CPU PM notifier for OMAP4430 for suspend in order to prevent wrong temperature leading to a critical shutdown (Peter Ujfalusi)" * tag 'thermal-v5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: thermal: ti-soc-thermal: Disable the CPU PM notifier for OMAP4430
2020-11-19ALSA: mixart: Fix mutex deadlockTakashi Iwai1-3/+2
The code change for switching to non-atomic mode brought the unexpected mutex deadlock in get_msg(). It converted the spinlock with the existing mutex, but there were calls with the already holding the mutex. Since the only place that needs the extra lock is the code path from snd_mixart_send_msg(), remove the mutex lock in get_msg() and apply in the caller side for fixing the mutex deadlock. Fixes: 8d3a8b5cb57d ("ALSA: mixart: Use nonatomic PCM ops") Reported-by: Dan Carpenter <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2020-11-19xfs: don't allow NOWAIT DIO across extent boundariesDave Chinner1-0/+29
Jens has reported a situation where partial direct IOs can be issued and completed yet still return -EAGAIN. We don't want this to report a short IO as we want XFS to complete user DIO entirely or not at all. This partial IO situation can occur on a write IO that is split across an allocated extent and a hole, and the second mapping is returning EAGAIN because allocation would be required. The trivial reproducer: $ sudo xfs_io -fdt -c "pwrite 0 4k" -c "pwrite -V 1 -b 8k -N 0 8k" /mnt/scr/foo wrote 4096/4096 bytes at offset 0 4 KiB, 1 ops; 0.0001 sec (27.509 MiB/sec and 7042.2535 ops/sec) pwrite: Resource temporarily unavailable $ The pwritev2(0, 8kB, RWF_NOWAIT) call returns EAGAIN having done the first 4kB write: xfs_file_direct_write: dev 259:1 ino 0x83 size 0x1000 offset 0x0 count 0x2000 iomap_apply: dev 259:1 ino 0x83 pos 0 length 8192 flags WRITE|DIRECT|NOWAIT (0x31) ops xfs_direct_write_iomap_ops caller iomap_dio_rw actor iomap_dio_actor xfs_ilock_nowait: dev 259:1 ino 0x83 flags ILOCK_SHARED caller xfs_ilock_for_iomap xfs_iunlock: dev 259:1 ino 0x83 flags ILOCK_SHARED caller xfs_direct_write_iomap_begin xfs_iomap_found: dev 259:1 ino 0x83 size 0x1000 offset 0x0 count 8192 fork data startoff 0x0 startblock 24 blockcount 0x1 iomap_apply_dstmap: dev 259:1 ino 0x83 bdev 259:1 addr 102400 offset 0 length 4096 type MAPPED flags DIRTY Here the first iomap loop has mapped the first 4kB of the file and issued the IO, and we enter the second iomap_apply loop: iomap_apply: dev 259:1 ino 0x83 pos 4096 length 4096 flags WRITE|DIRECT|NOWAIT (0x31) ops xfs_direct_write_iomap_ops caller iomap_dio_rw actor iomap_dio_actor xfs_ilock_nowait: dev 259:1 ino 0x83 flags ILOCK_SHARED caller xfs_ilock_for_iomap xfs_iunlock: dev 259:1 ino 0x83 flags ILOCK_SHARED caller xfs_direct_write_iomap_begin And we exit with -EAGAIN out because we hit the allocate case trying to make the second 4kB block. Then IO completes on the first 4kB and the original IO context completes and unlocks the inode, returning -EAGAIN to userspace: xfs_end_io_direct_write: dev 259:1 ino 0x83 isize 0x1000 disize 0x1000 offset 0x0 count 4096 xfs_iunlock: dev 259:1 ino 0x83 flags IOLOCK_SHARED caller xfs_file_dio_aio_write There are other vectors to the same problem when we re-enter the mapping code if we have to make multiple mappinfs under NOWAIT conditions. e.g. failing trylocks, COW extents being found, allocation being required, and so on. Avoid all these potential problems by only allowing IOMAP_NOWAIT IO to go ahead if the mapping we retrieve for the IO spans an entire allocated extent. This avoids the possibility of subsequent mappings to complete the IO from triggering NOWAIT semantics by any means as NOWAIT IO will now only enter the mapping code once per NOWAIT IO. Reported-and-tested-by: Jens Axboe <[email protected]> Signed-off-by: Dave Chinner <[email protected]> Reviewed-by: Darrick J. Wong <[email protected]> Signed-off-by: Darrick J. Wong <[email protected]>
2020-11-19libbpf: Fix VERSIONED_SYM_COUNT number parsingJiri Olsa1-0/+2
We remove "other info" from "readelf -s --wide" output when parsing GLOBAL_SYM_COUNT variable, which was added in [1]. But we don't do that for VERSIONED_SYM_COUNT and it's failing the check_abi target on powerpc Fedora 33. The extra "other info" wasn't problem for VERSIONED_SYM_COUNT parsing until commit [2] added awk in the pipe, which assumes that the last column is symbol, but it can be "other info". Adding "other info" removal for VERSIONED_SYM_COUNT the same way as we did for GLOBAL_SYM_COUNT parsing. [1] aa915931ac3e ("libbpf: Fix readelf output parsing for Fedora") [2] 746f534a4809 ("tools/libbpf: Avoid counting local symbols in ABI check") Fixes: 746f534a4809 ("tools/libbpf: Avoid counting local symbols in ABI check") Signed-off-by: Jiri Olsa <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-11-19Merge tag 'nvme-5.10-2020-11-19' of git://git.infradead.org/nvme into block-5.10Jens Axboe3-13/+33
Pull NVMe fixes from Christoph: "nvme fixes for 5.10 - Doorbell Buffer freeing fix (Minwoo Im) - CSE log leak fix (Keith Busch)" * tag 'nvme-5.10-2020-11-19' of git://git.infradead.org/nvme: nvme: fix memory leak freeing command effects nvme: directly cache command effects log nvme: free sq/cq dbbuf pointers when dbbuf set fails
2020-11-19HID: logitech-dj: Fix Dinovo Mini when paired with a MX5x00 receiverHans de Goede2-0/+26
Some users are pairing the Dinovo keyboards with the MX5000 or MX5500 receivers, instead of with the Dinovo receivers. The receivers are mostly the same (and the air protocol obviously is compatible) but currently the Dinovo receivers are handled by hid-lg.c while the MX5x00 receivers are handled by logitech-dj.c. When using a Dinovo keyboard, with its builtin touchpad, through logitech-dj.c then the touchpad stops working because when asking the receiver for paired devices, we get only 1 paired device with a device_type of REPORT_TYPE_KEYBOARD. And since we don't see a paired mouse, we have nowhere to send mouse-events to, so we drop them. Extend the existing fix for the Dinovo Edge for this to also cover the Dinovo Mini keyboard and also add a mapping to logitech-hidpp for the Media key on the Dinovo Mini, so that that keeps working too. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1811424 Fixes: f2113c3020ef ("HID: logitech-dj: add support for Logitech Bluetooth Mini-Receiver") Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Benjamin Tissoires <[email protected]>
2020-11-19HID: logitech-dj: Fix an error in mse_bluetooth_descriptorHans de Goede1-1/+1
Fix an error in the mouse / INPUT(2) descriptor used for quad/bt2.0 combo receivers. Replace INPUT with INPUT (Data,Var,Abs) for the field for the 4 extra buttons which share their report-byte with the low-res hwheel. This is likely a copy and paste error. I've verified that the new 0x81, 0x02 value matches both the mouse descriptor for the currently supported MX5000 / MX5500 receivers, as well as the INPUT(2) mouse descriptors for the Dinovo receivers for which support is being worked on. Cc: [email protected] Fixes: f2113c3020ef ("HID: logitech-dj: add support for Logitech Bluetooth Mini-Receiver") Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Benjamin Tissoires <[email protected]>
2020-11-19Revert "iommu/vt-d: Take CONFIG_PCI_ATS into account"Thomas Gleixner1-2/+0
This reverts commit 8986f223bd777a73119f5d593c15b4d630ff49bb. The proper fix is queued in Will's tree now Signed-off-by: Thomas Gleixner <[email protected]>
2020-11-19Merge branch 'acpi-fan'Rafael J. Wysocki1-0/+1
* acpi-fan: ACPI: fan: Initialize performance state sysfs attribute
2020-11-19Merge branch 'pm-cpuidle'Rafael J. Wysocki1-2/+2
* pm-cpuidle: cpuidle: tegra: Annotate tegra_pm_set_cpu_in_lp2() with RCU_NONIDLE
2020-11-19powerpc/64s: rename pnv|pseries_setup_rfi_flush to _setup_security_mitigationsDaniel Axtens4-9/+11
pseries|pnv_setup_rfi_flush already does the count cache flush setup, and we just added entry and uaccess flushes. So the name is not very accurate any more. In both platforms we then also immediately setup the STF flush. Rename them to _setup_security_mitigations and fold the STF flush in. Signed-off-by: Daniel Axtens <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2020-11-19selftests/powerpc: refactor entry and rfi_flush testsDaniel Axtens6-120/+96
For simplicity in backporting, the original entry_flush test contained a lot of duplicated code from the rfi_flush test. De-duplicate that code. Signed-off-by: Daniel Axtens <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2020-11-19selftests/powerpc: entry flush testDaniel Axtens3-1/+200
Add a test modelled on the RFI flush test which counts the number of L1D misses doing a simple syscall with the entry flush on and off. For simplicity of backporting, this test duplicates a lot of code from rfi_flush. We clean that up in the next patch. Signed-off-by: Daniel Axtens <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2020-11-19powerpc: Only include kup-radix.h for 64-bit Book3SMichael Ellerman3-6/+11
In kup.h we currently include kup-radix.h for all 64-bit builds, which includes Book3S and Book3E. The latter doesn't make sense, Book3E never uses the Radix MMU. This has worked up until now, but almost by accident, and the recent uaccess flush changes introduced a build breakage on Book3E because of the bad structure of the code. So disentangle things so that we only use kup-radix.h for Book3S. This requires some more stubs in kup.h and fixing an include in syscall_64.c. Signed-off-by: Michael Ellerman <[email protected]>
2020-11-19powerpc/64s: flush L1D after user accessesNicholas Piggin13-90/+233
IBM Power9 processors can speculatively operate on data in the L1 cache before it has been completely validated, via a way-prediction mechanism. It is not possible for an attacker to determine the contents of impermissible memory using this method, since these systems implement a combination of hardware and software security measures to prevent scenarios where protected data could be leaked. However these measures don't address the scenario where an attacker induces the operating system to speculatively execute instructions using data that the attacker controls. This can be used for example to speculatively bypass "kernel user access prevention" techniques, as discovered by Anthony Steinhauser of Google's Safeside Project. This is not an attack by itself, but there is a possibility it could be used in conjunction with side-channels or other weaknesses in the privileged code to construct an attack. This issue can be mitigated by flushing the L1 cache between privilege boundaries of concern. This patch flushes the L1 cache after user accesses. This is part of the fix for CVE-2020-4788. Signed-off-by: Nicholas Piggin <[email protected]> Signed-off-by: Daniel Axtens <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2020-11-19powerpc/64s: flush L1D on kernel entryNicholas Piggin11-2/+200
IBM Power9 processors can speculatively operate on data in the L1 cache before it has been completely validated, via a way-prediction mechanism. It is not possible for an attacker to determine the contents of impermissible memory using this method, since these systems implement a combination of hardware and software security measures to prevent scenarios where protected data could be leaked. However these measures don't address the scenario where an attacker induces the operating system to speculatively execute instructions using data that the attacker controls. This can be used for example to speculatively bypass "kernel user access prevention" techniques, as discovered by Anthony Steinhauser of Google's Safeside Project. This is not an attack by itself, but there is a possibility it could be used in conjunction with side-channels or other weaknesses in the privileged code to construct an attack. This issue can be mitigated by flushing the L1 cache between privilege boundaries of concern. This patch flushes the L1 cache on kernel entry. This is part of the fix for CVE-2020-4788. Signed-off-by: Nicholas Piggin <[email protected]> Signed-off-by: Daniel Axtens <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2020-11-19selftests/powerpc: rfi_flush: disable entry flush if presentRussell Currey1-6/+29
We are about to add an entry flush. The rfi (exit) flush test measures the number of L1D flushes over a syscall with the RFI flush enabled and disabled. But if the entry flush is also enabled, the effect of enabling and disabling the RFI flush is masked. If there is a debugfs entry for the entry flush, disable it during the RFI flush and restore it later. Reported-by: Spoorthy S <[email protected]> Signed-off-by: Russell Currey <[email protected]> Signed-off-by: Daniel Axtens <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2020-11-19ALSA: hda/ca0132: Fix compile warning without PCITakashi Iwai1-0/+2
CONFIG_PCI=n leads to a compile warning like: sound/pci/hda/patch_ca0132.c:8214:10: warning: no case matching constant switch condition '0' due to the missed handling of QUIRK_NONE in ca0132_mmio_init(). Fix it. Fixes: bf2aa9ccc8e5 ("ALSA: hda/ca0132 - Cleanup ca0132_mmio_init function.") Reported-by: kernel test robot <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2020-11-19MAINTAINERS: Temporarily add myself to the IOMMU entryWill Deacon1-0/+1
Joerg is recovering from an injury, so temporarily add myself to the IOMMU MAINTAINERS entry so that I'm more likely to get CC'd on patches while I help to look after the tree for him. Suggested-by: Joerg Roedel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2020-11-19iommu/vt-d: Fix compile error with CONFIG_PCI_ATS not setLu Baolu1-1/+3
Fix the compile error below (CONFIG_PCI_ATS not set): drivers/iommu/intel/dmar.c: In function ‘vf_inherit_msi_domain’: drivers/iommu/intel/dmar.c:338:59: error: ‘struct pci_dev’ has no member named ‘physfn’; did you mean ‘is_physfn’? 338 | dev_set_msi_domain(&pdev->dev, dev_get_msi_domain(&pdev->physfn->dev)); | ^~~~~~ | is_physfn Fixes: ff828729be44 ("iommu/vt-d: Cure VF irqdomain hickup") Reported-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Lu Baolu <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: https://lore.kernel.org/linux-iommu/CAMuHMdXA7wfJovmfSH2nbAhN0cPyCiFHodTvg4a8Hm9rx5Dj-w@mail.gmail.com/ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2020-11-19Merge tag 'x86-urgent-2020-11-15' of ↵Will Deacon3-14/+21
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into for-next/iommu/fixes Pull in x86 fixes from Thomas, as they include a change to the Intel DMAR code on which we depend: * tag 'x86-urgent-2020-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: iommu/vt-d: Cure VF irqdomain hickup x86/platform/uv: Fix copied UV5 output archtype x86/platform/uv: Drop last traces of uv_flush_tlb_others
2020-11-19Merge tag 'drm/sun4i-dma-fix-pull-request' of ↵Maxime Ripard1-1/+7
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-misc-fixes Fix for drm/sun4i shared with arm-soc This patch is a preliminary fix that will conflict with subsequent work merged through arm-soc. Signed-off-by: Maxime Ripard <[email protected]> # gpg: Signature made Wed 18 Nov 2020 09:51:53 AM CET # gpg: using EDDSA key 5C1337A45ECA9AEB89060E9EE3EF0D6F671851C5 # gpg: Good signature from "Maxime Ripard <[email protected]>" [unknown] # gpg: aka "Maxime Ripard <[email protected]>" [unknown] # gpg: aka "Maxime Ripard (Work Address) <[email protected]>" [unknown] # gpg: aka "Maxime Ripard (Work Address) <[email protected]>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: BE56 75C3 7E81 8C8B 5764 241C 254B CFC5 6BF6 CE8D # Subkey fingerprint: 5C13 37A4 5ECA 9AEB 8906 0E9E E3EF 0D6F 6718 51C5 From: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-11-19Merge tag 'gvt-fixes-2020-11-17' of https://github.com/intel/gvt-linux into ↵Rodrigo Vivi3-3/+6
drm-intel-fixes gvt-fixes-2020-11-17 - Temporarily disable VFIO edid on BXT/APL (Colin) - Fix emulated DPCD for version 1.2 (Tina) - Fix error return when failing to take module reference (Xiongfeng) Signed-off-by: Rodrigo Vivi <[email protected]> From: Zhenyu Wang <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-11-19drm/i915/gt: Remember to free the virtual breadcrumbsChris Wilson1-0/+1
Since we allocate some breadcrumbs for the virtual engine, and the virtual engine has a custom destructor, we also need to free the breadcrumbs after use. Fixes: b3786b29379c ("drm/i915/gt: Distinguish the virtual breadcrumbs from the irq breadcrumbs") Signed-off-by: Chris Wilson <[email protected]> Cc: Tvrtko Ursulin <[email protected]> Reviewed-by: Tvrtko Ursulin <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 45e50f48b7907e650cfbbc7879abfe3a0c419c73) Signed-off-by: Rodrigo Vivi <[email protected]>
2020-11-19drm/i915: Handle max_bpc==16Ville Syrjälä1-1/+2
EDID can declare the maximum supported bpc up to 16, and apparently there are displays that do so. Currently we assume 12 bpc is tha max. Fix the assumption and toss in a MISSING_CASE() for any other value we don't expect to see. This fixes modesets with a display with EDID max bpc > 12. Previously any modeset would just silently fail on platforms that didn't otherwise limit this via the max_bpc property. In particular we don't add the max_bpc property to HDMI ports on gmch platforms, and thus we would see the raw max_bpc coming from the EDID. I suppose we could already adjust this to also allow 16bpc, but seeing as no current platform supports that there is little point. Cc: [email protected] Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2632 Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: José Roberto de Souza <[email protected]> (cherry picked from commit 2ca5a7b85b0c2b97ef08afbd7799b022e29f192e) Signed-off-by: Rodrigo Vivi <[email protected]>
2020-11-18Merge tag 'linux-can-fixes-for-5.10-20201118' of ↵Jakub Kicinski4-12/+14
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2020-11-18 Jimmy Assarsson provides two patches for the kvaser_pciefd and kvaser_usb drivers, where the can_bittiming_const are fixed. The next patch is by me and fixes an erroneous flexcan_transceiver_enable() during bus-off recovery in the flexcan driver. Jarkko Nikula's patch for the m_can driver fixes the IRQ handler to only process the interrupts if the device is not suspended. * tag 'linux-can-fixes-for-5.10-20201118' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: m_can: process interrupt only when not runtime suspended can: flexcan: flexcan_chip_start(): fix erroneous flexcan_transceiver_enable() during bus-off recovery can: kvaser_usb: kvaser_usb_hydra: Fix KCAN bittiming limits can: kvaser_pciefd: Fix KCAN bittiming limits ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-18net/mlx4_core: Fix init_hca fields offsetAya Levin2-5/+5
Slave function read the following capabilities from the wrong offset: 1. log_mc_entry_sz 2. fs_log_entry_sz 3. log_mc_hash_sz Fix that by adjusting these capabilities offset to match firmware layout. Due to the wrong offset read, the following issues might occur: 1+2. Negative value reported at max_mcast_qp_attach. 3. Driver to init FW with multicast hash size of zero. Fixes: a40ded604365 ("net/mlx4_core: Add masking for a few queries on HCA caps") Signed-off-by: Aya Levin <[email protected]> Reviewed-by: Moshe Shemesh <[email protected]> Reviewed-by: Eran Ben Elisha <[email protected]> Signed-off-by: Tariq Toukan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-18Merge tag 'mlx5-fixes-2020-11-17' of ↵Jakub Kicinski10-34/+54
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2020-11-17 This series introduces some fixes to mlx5 driver. * tag 'mlx5-fixes-2020-11-17' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: fix error return code in mlx5e_tc_nic_init() net/mlx5: E-Switch, Fail mlx5_esw_modify_vport_rate if qos disabled net/mlx5: Disable QoS when min_rates on all VFs are zero net/mlx5: Clear bw_share upon VF disable net/mlx5: Add handling of port type in rule deletion net/mlx5e: Fix check if netdev is bond slave net/mlx5e: Fix IPsec packet drop by mlx5e_tc_update_skb net/mlx5e: Set IPsec WAs only in IP's non checksum partial case. net/mlx5e: Fix refcount leak on kTLS RX resync ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-18atm: nicstar: Unmap DMA on send errorSebastian Andrzej Siewior1-0/+2
The `skb' is mapped for DMA in ns_send() but does not unmap DMA in case push_scqe() fails to submit the `skb'. The memory of the `skb' is released so only the DMA mapping is leaking. Unmap the DMA mapping in case push_scqe() failed. Fixes: 864a3ff635fa7 ("atm: [nicstar] remove virt_to_bus() and support 64-bit platforms") Cc: Chas Williams <[email protected]> Signed-off-by: Sebastian Andrzej Siewior <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-18page_frag: Recover from memory pressureDongli Zhang1-0/+5
The ethernet driver may allocate skb (and skb->data) via napi_alloc_skb(). This ends up to page_frag_alloc() to allocate skb->data from page_frag_cache->va. During the memory pressure, page_frag_cache->va may be allocated as pfmemalloc page. As a result, the skb->pfmemalloc is always true as skb->data is from page_frag_cache->va. The skb will be dropped if the sock (receiver) does not have SOCK_MEMALLOC. This is expected behaviour under memory pressure. However, once kernel is not under memory pressure any longer (suppose large amount of memory pages are just reclaimed), the page_frag_alloc() may still re-use the prior pfmemalloc page_frag_cache->va to allocate skb->data. As a result, the skb->pfmemalloc is always true unless page_frag_cache->va is re-allocated, even if the kernel is not under memory pressure any longer. Here is how kernel runs into issue. 1. The kernel is under memory pressure and allocation of PAGE_FRAG_CACHE_MAX_ORDER in __page_frag_cache_refill() will fail. Instead, the pfmemalloc page is allocated for page_frag_cache->va. 2: All skb->data from page_frag_cache->va (pfmemalloc) will have skb->pfmemalloc=true. The skb will always be dropped by sock without SOCK_MEMALLOC. This is an expected behaviour. 3. Suppose a large amount of pages are reclaimed and kernel is not under memory pressure any longer. We expect skb->pfmemalloc drop will not happen. 4. Unfortunately, page_frag_alloc() does not proactively re-allocate page_frag_alloc->va and will always re-use the prior pfmemalloc page. The skb->pfmemalloc is always true even kernel is not under memory pressure any longer. Fix this by freeing and re-allocating the page instead of recycling it. References: https://lore.kernel.org/lkml/[email protected]/ References: https://lore.kernel.org/linux-mm/[email protected]/ Suggested-by: Matthew Wilcox (Oracle) <[email protected]> Cc: Aruna Ramakrishna <[email protected]> Cc: Bert Barbe <[email protected]> Cc: Rama Nichanamatlu <[email protected]> Cc: Venkat Venkatsubra <[email protected]> Cc: Manjunath Patil <[email protected]> Cc: Joe Jin <[email protected]> Cc: SRINIVAS <[email protected]> Fixes: 79930f5892e1 ("net: do not deplete pfmemalloc reserve") Signed-off-by: Dongli Zhang <[email protected]> Acked-by: Vlastimil Babka <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-18drm/amd/display: Always get CRTC updated constant values inside commit tailRodrigo Siqueira1-1/+2
We recently improved our display atomic commit and tail sequence to avoid some issues related to concurrency. One of the major changes consisted of moving the interrupt disable and the stream release from our atomic commit to our atomic tail (commit 6d90a208cfff ("drm/amd/display: Move disable interrupt into commit tail")) . However, the new code introduced inside our commit tail function was inserted right after the function drm_atomic_helper_update_legacy_modeset_state(), which has routines for updating internal data structs related to timestamps. As a result, in certain conditions, the display module can reach a situation where we update our constants and, after that, clean it. This situation generates the following warning: amdgpu 0000:03:00.0: drm_WARN_ON_ONCE(drm_drv_uses_atomic_modeset(dev)) WARNING: CPU: 6 PID: 1269 at drivers/gpu/drm/drm_vblank.c:722 drm_crtc_vblank_helper_get_vblank_timestamp_internal+0x32b/0x340 [drm] ... RIP: 0010:drm_crtc_vblank_helper_get_vblank_timestamp_internal+0x32b/0x340 [drm] ... Call Trace: ? dc_stream_get_vblank_counter+0x57/0x60 [amdgpu] drm_crtc_vblank_helper_get_vblank_timestamp+0x1c/0x20 [drm] drm_get_last_vbltimestamp+0xad/0xc0 [drm] drm_reset_vblank_timestamp+0x63/0xd0 [drm] drm_crtc_vblank_on+0x85/0x150 [drm] amdgpu_dm_atomic_commit_tail+0xaf1/0x2330 [amdgpu] commit_tail+0x99/0x130 [drm_kms_helper] drm_atomic_helper_commit+0x123/0x150 [drm_kms_helper] amdgpu_dm_atomic_commit+0x11/0x20 [amdgpu] drm_atomic_commit+0x4a/0x50 [drm] drm_atomic_helper_set_config+0x7c/0xc0 [drm_kms_helper] drm_mode_setcrtc+0x20b/0x7e0 [drm] ? tomoyo_path_number_perm+0x6f/0x200 ? drm_mode_getcrtc+0x190/0x190 [drm] drm_ioctl_kernel+0xae/0xf0 [drm] drm_ioctl+0x245/0x400 [drm] ? drm_mode_getcrtc+0x190/0x190 [drm] amdgpu_drm_ioctl+0x4e/0x80 [amdgpu] __x64_sys_ioctl+0x91/0xc0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 ... For fixing this issue we rely upon a refactor introduced on drm_atomic_helper_update_legacy_modeset_state ("Remove the timestamping constant update from drm_atomic_helper_update_legacy_modeset_state()") which decouples constant values update from drm_atomic_helper_update_legacy_modeset_state to a new helper. Basically, this commit uses this new helper and place it right after our release module to avoid a situation where our CRTC struct gets wrong values. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1373 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1349 Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-11-18Merge tag 'gfs2-v5.10-rc4-fixes' of ↵Linus Torvalds1-1/+12
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull gfs2 fix from Andreas Gruenbacher: "Fix gfs2 freeze/thaw" * tag 'gfs2-v5.10-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: Fix regression in freeze_go_sync
2020-11-18Merge tag 'nfsd-5.10-2' of git://linux-nfs.org/~bfields/linuxLinus Torvalds1-1/+2
Pull nfsd fix from Bruce Fields: "Just one quick fix for a tracing oops" * tag 'nfsd-5.10-2' of git://linux-nfs.org/~bfields/linux: SUNRPC: Fix oops in the rpc_xdr_buf event class
2020-11-18Merge tag 'linux-kselftest-kunit-fixes-5.10-rc5' of ↵Linus Torvalds9-54/+80
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kunit fixes from Shuah Khan: "Several fixes to Kunit documentation and tools, and to not pollute the source directory. Also remove the incorrect kunit .gitattributes file" * tag 'linux-kselftest-kunit-fixes-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: fix display of failed expectations for strings kunit: tool: fix extra trailing \n in raw + parsed test output kunit: tool: print out stderr from make (like build warnings) KUnit: Docs: usage: wording fixes KUnit: Docs: style: fix some Kconfig example issues KUnit: Docs: fix a wording typo kunit: Do not pollute source directory with generated files (test.log) kunit: Do not pollute source directory with generated files (.kunitconfig) kunit: tool: fix pre-existing python type annotation errors kunit: Fix kunit.py parse subcommand (use null build_dir) kunit: tool: unmark test_data as binary blobs
2020-11-18net: dsa: mv88e6xxx: Wait for EEPROM done after HW resetAndrew Lunn3-0/+34
When the switch is hardware reset, it reads the contents of the EEPROM. This can contain instructions for programming values into registers and to perform waits between such programming. Reading the EEPROM can take longer than the 100ms mv88e6xxx_hardware_reset() waits after deasserting the reset GPIO. So poll the EEPROM done bit to ensure it is complete. Signed-off-by: Andrew Lunn <[email protected]> Signed-off-by: Ruslan Sushko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-18Merge branch 'mlxsw-couple-of-fixes'Jakub Kicinski2-2/+3
Ido Schimmel says: ==================== mlxsw: Couple of fixes Patch #1 fixes firmware flashing when CONFIG_MLXSW_CORE=y and CONFIG_MLXFW=m. Patch #2 prevents EMAD transactions from needlessly failing when the system is under heavy load by using exponential backoff. Please consider patch #2 for stable. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-18mlxsw: core: Use variable timeout for EMAD retriesIdo Schimmel1-1/+2
The driver sends Ethernet Management Datagram (EMAD) packets to the device for configuration purposes and waits for up to 200ms for a reply. A request is retried up to 5 times. When the system is under heavy load, replies are not always processed in time and EMAD transactions fail. Make the process more robust to such delays by using exponential backoff. First wait for up to 200ms, then retransmit and wait for up to 400ms and so on. Fixes: caf7297e7ab5 ("mlxsw: core: Introduce support for asynchronous EMAD register access") Reported-by: Denis Yulevich <[email protected]> Tested-by: Denis Yulevich <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-18mlxsw: Fix firmware flashingIdo Schimmel1-1/+1
The commit cited below moved firmware flashing functionality from mlxsw_spectrum to mlxsw_core, but did not adjust the Kconfig dependencies. This makes it possible to have mlxsw_core as built-in and mlxfw as a module. The mlxfw code is therefore not reachable from mlxsw_core and firmware flashing fails: # devlink dev flash pci/0000:01:00.0 file mellanox/mlxsw_spectrum-13.2008.1310.mfa2 devlink answers: Operation not supported Fix by having mlxsw_core select mlxfw. Fixes: b79cb787ac70 ("mlxsw: Move fw flashing code into core.c") Signed-off-by: Ido Schimmel <[email protected]> Reported-by: Vadim Pasternak <[email protected]> Tested-by: Vadim Pasternak <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-18net: Have netpoll bring-up DSA management interfaceFlorian Fainelli1-4/+18
DSA network devices rely on having their DSA management interface up and running otherwise their ndo_open() will return -ENETDOWN. Without doing this it would not be possible to use DSA devices as netconsole when configured on the command line. These devices also do not utilize the upper/lower linking so the check about the netpoll device having upper is not going to be a problem. The solution adopted here is identical to the one done for net/ipv4/ipconfig.c with 728c02089a0e ("net: ipv4: handle DSA enabled master network devices"), with the network namespace scope being restricted to that of the process configuring netpoll. Fixes: 04ff53f96a93 ("net: dsa: Add netconsole support") Tested-by: Vladimir Oltean <[email protected]> Signed-off-by: Florian Fainelli <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-18atl1e: fix error return code in atl1e_probe()Zhang Changzhong1-2/+2
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: a6a5325239c2 ("atl1e: Atheros L1E Gigabit Ethernet driver") Reported-by: Hulk Robot <[email protected]> Signed-off-by: Zhang Changzhong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-18atl1c: fix error return code in atl1c_probe()Zhang Changzhong1-2/+2
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 43250ddd75a3 ("atl1c: Atheros L1C Gigabit Ethernet driver") Reported-by: Hulk Robot <[email protected]> Signed-off-by: Zhang Changzhong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-18ah6: fix error return code in ah6_input()Zhang Changzhong1-1/+2
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Hulk Robot <[email protected]> Signed-off-by: Zhang Changzhong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-18net: usb: qmi_wwan: Set DTR quirk for MR400Filip Moc1-1/+1
LTE module MR400 embedded in TL-MR6400 v4 requires DTR to be set. Signed-off-by: Filip Moc <[email protected]> Acked-by: Bjørn Mork <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-18regulator: ti-abb: Fix array out of bound read access on the first transitionNishanth Menon1-1/+11
At the start of driver initialization, we do not know what bias setting the bootloader has configured the system for and we only know for certain the very first time we do a transition. However, since the initial value of the comparison index is -EINVAL, this negative value results in an array out of bound access on the very first transition. Since we don't know what the setting is, we just set the bias configuration as there is nothing to compare against. This prevents the array out of bound access. NOTE: Even though we could use a more relaxed check of "< 0" the only valid values(ignoring cosmic ray induced bitflips) are -EINVAL, 0+. Fixes: 40b1936efebd ("regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver") Link: https://lore.kernel.org/linux-mm/CA+G9fYuk4imvhyCN7D7T6PMDH6oNp6HDCRiTUKMQ6QXXjBa4ag@mail.gmail.com/ Reported-by: Naresh Kamboju <[email protected]> Reviewed-by: Arnd Bergmann <[email protected]> Signed-off-by: Nishanth Menon <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2020-11-18ASOC: Intel: kbl_rt5663_rt5514_max98927: Do not try to disable disabled clockGuenter Roeck1-0/+2
In kabylake_set_bias_level(), enabling mclk may fail if the clock has already been enabled by the firmware. Attempts to disable that clock later will fail with a warning backtrace. mclk already disabled WARNING: CPU: 2 PID: 108 at drivers/clk/clk.c:952 clk_core_disable+0x1b6/0x1cf ... Call Trace: clk_disable+0x2d/0x3a kabylake_set_bias_level+0x72/0xfd [snd_soc_kbl_rt5663_rt5514_max98927] snd_soc_card_set_bias_level+0x2b/0x6f snd_soc_dapm_set_bias_level+0xe1/0x209 dapm_pre_sequence_async+0x63/0x96 async_run_entry_fn+0x3d/0xd1 process_one_work+0x2a9/0x526 ... Only disable the clock if it has been enabled. Fixes: 15747a802075 ("ASoC: eve: implement set_bias_level function for rt5514") Cc: Brent Lu <[email protected]> Cc: Curtis Malainey <[email protected]> Signed-off-by: Guenter Roeck <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2020-11-18xfs: return corresponding errcode if xfs_initialize_perag() failYu Kuai1-3/+8
In xfs_initialize_perag(), if kmem_zalloc(), xfs_buf_hash_init(), or radix_tree_preload() failed, the returned value 'error' is not set accordingly. Reported-as-fixing: 8b26c5825e02 ("xfs: handle ENOMEM correctly during initialisation of perag structures") Fixes: 9b2471797942 ("xfs: cache unlinked pointers in an rhashtable") Reported-by: Hulk Robot <[email protected]> Signed-off-by: Yu Kuai <[email protected]> Reviewed-by: Darrick J. Wong <[email protected]> Signed-off-by: Darrick J. Wong <[email protected]>
2020-11-18xfs: ensure inobt record walks always make forward progressDarrick J. Wong1-3/+24
The aim of the inode btree record iterator function is to call a callback on every record in the btree. To avoid having to tear down and recreate the inode btree cursor around every callback, it caches a certain number of records in a memory buffer. After each batch of callback invocations, we have to perform a btree lookup to find the next record after where we left off. However, if the keys of the inode btree are corrupt, the lookup might put us in the wrong part of the inode btree, causing the walk function to loop forever. Therefore, we add extra cursor tracking to make sure that we never go backwards neither when performing the lookup nor when jumping to the next inobt record. This also fixes an off by one error where upon resume the lookup should have been for the inode /after/ the point at which we stopped. Found by fuzzing xfs/460 with keys[2].startino = ones causing bulkstat and quotacheck to hang. Fixes: a211432c27ff ("xfs: create simplified inode walk function") Signed-off-by: Darrick J. Wong <[email protected]> Reviewed-by: Chandan Babu R <[email protected]>
2020-11-18xfs: fix forkoff miscalculation related to XFS_LITINO(mp)Gao Xiang1-1/+7
Currently, commit e9e2eae89ddb dropped a (int) decoration from XFS_LITINO(mp), and since sizeof() expression is also involved, the result of XFS_LITINO(mp) is simply as the size_t type (commonly unsigned long). Considering the expression in xfs_attr_shortform_bytesfit(): offset = (XFS_LITINO(mp) - bytes) >> 3; let "bytes" be (int)340, and "XFS_LITINO(mp)" be (unsigned long)336. on 64-bit platform, the expression is offset = ((unsigned long)336 - (int)340) >> 3 = (int)(0xfffffffffffffffcUL >> 3) = -1 but on 32-bit platform, the expression is offset = ((unsigned long)336 - (int)340) >> 3 = (int)(0xfffffffcUL >> 3) = 0x1fffffff instead. so offset becomes a large positive number on 32-bit platform, and cause xfs_attr_shortform_bytesfit() returns maxforkoff rather than 0. Therefore, one result is "ASSERT(new_size <= XFS_IFORK_SIZE(ip, whichfork));" assertion failure in xfs_idata_realloc(), which was also the root cause of the original bugreport from Dennis, see: https://bugzilla.redhat.com/show_bug.cgi?id=1894177 And it can also be manually triggered with the following commands: $ touch a; $ setfattr -n user.0 -v "`seq 0 80`" a; $ setfattr -n user.1 -v "`seq 0 80`" a on 32-bit platform. Fix the case in xfs_attr_shortform_bytesfit() by bailing out "XFS_LITINO(mp) < bytes" in advance suggested by Eric and a misleading comment together with this bugfix suggested by Darrick. It seems the other users of XFS_LITINO(mp) are not impacted. Fixes: e9e2eae89ddb ("xfs: only check the superblock version for dinode size calculation") Cc: <[email protected]> # 5.7+ Reported-and-tested-by: Dennis Gilmore <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Gao Xiang <[email protected]> Reviewed-by: Darrick J. Wong <[email protected]> Signed-off-by: Darrick J. Wong <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.