aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2016-11-30ASoC: sun4i-codec: Add support for H3 codecChen-Yu Tsai2-0/+74
The codec on the H3 is similar to the one found on the A31. One key difference is the analog path controls are routed through the PRCM block. This is supported by the sun8i-codec-analog driver, and tied into this codec driver with the audio card's aux_dev. In addition, the H3 has no HP (headphone) and HBIAS support, and no MIC3 input. The FIFO related registers are slightly rearranged. Signed-off-by: Chen-Yu Tsai <[email protected]> Acked-by: Rob Herring <[email protected]> Acked-by: Maxime Ripard <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2016-11-30ASoC: sun4i-codec: Add support for A23 codecChen-Yu Tsai2-2/+117
The codec in the A23 is similar to the one found on the A31. One key difference is the analog path controls are routed through the PRCM block. This is supported by the sun8i-codec-analog driver, and tied into this codec driver with the audio card's aux_dev. In addition, the A23 does not have LINEOUT, and it does not support headset jack detection or buttons. Signed-off-by: Chen-Yu Tsai <[email protected]> Acked-by: Rob Herring <[email protected]> Acked-by: Maxime Ripard <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2016-11-30ASoC: cht_bsw_rt5672: Use HID translation unitTakashi Iwai1-2/+28
Instead of hard-coded "i2c-10EC5670:00", use the translation helper to avoid the mismatch between i2c-codec and ACPI strings just like what we've done for bytcr_rt5640. This gives more robust binding on funky devices like Dell Wyse 3040. Signed-off-by: Takashi Iwai <[email protected]> Reviewed-by: Pierre-Louis Bossart <[email protected]> Acked-by: Vinod Koul <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2016-11-30ASoC: intel: Fix crash at suspend/resume without card registrationTakashi Iwai1-0/+6
When ASoC Intel SST Medfield driver is probed but without codec / card assigned, it causes an Oops and freezes the kernel at suspend/resume, PM: Suspending system (freeze) Suspending console(s) (use no_console_suspend to debug) BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 IP: [<ffffffffc09d9409>] sst_soc_prepare+0x19/0xa0 [snd_soc_sst_mfld_platform] Oops: 0000 [#1] PREEMPT SMP CPU: 0 PID: 1552 Comm: systemd-sleep Tainted: G W 4.9.0-rc6-1.g5f5c2ad-default #1 Call Trace: [<ffffffffb45318f9>] dpm_prepare+0x209/0x460 [<ffffffffb4531b61>] dpm_suspend_start+0x11/0x60 [<ffffffffb40d3cc2>] suspend_devices_and_enter+0xb2/0x710 [<ffffffffb40d462e>] pm_suspend+0x30e/0x390 [<ffffffffb40d2eba>] state_store+0x8a/0x90 [<ffffffffb43c670f>] kobj_attr_store+0xf/0x20 [<ffffffffb42b0d97>] sysfs_kf_write+0x37/0x40 [<ffffffffb42b02bc>] kernfs_fop_write+0x11c/0x1b0 [<ffffffffb422be68>] __vfs_write+0x28/0x140 [<ffffffffb43728a8>] ? apparmor_file_permission+0x18/0x20 [<ffffffffb433b2ab>] ? security_file_permission+0x3b/0xc0 [<ffffffffb422d095>] vfs_write+0xb5/0x1a0 [<ffffffffb422e3d6>] SyS_write+0x46/0xa0 [<ffffffffb4719fbb>] entry_SYSCALL_64_fastpath+0x1e/0xad Add proper NULL checks in the PM code of mdfld driver. Signed-off-by: Takashi Iwai <[email protected]> Acked-by: Vinod Koul <[email protected]> Signed-off-by: Mark Brown <[email protected]> Cc: <[email protected]>
2016-11-30net: fec: cache statistics while device is downNikita Yushchenko2-4/+21
Execution 'ethtool -S' on fec device that is down causes OOPS on Vybrid board: Unhandled fault: external abort on non-linefetch (0x1008) at 0xe0898200 pgd = ddecc000 [e0898200] *pgd=9e406811, *pte=400d1653, *ppte=400d1453 Internal error: : 1008 [#1] SMP ARM ... Reason of OOPS is that fec_enet_get_ethtool_stats() accesses fec registers while IPG clock is stopped by PM. Fix that by caching statistics in fec_enet_private. Cache is initialized at device probe time, and updated at statistics request time if device is up, and also just before turning device off on down path. Additional locking is not needed, since cached statistics is accessed either before device is registered, or under rtnl_lock(). Signed-off-by: Nikita Yushchenko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-30ASoC: nau8825: lock longer to avoid playback pop upon resumeJohn Hsu1-6/+6
There is an issue about pop noise in NAU88L25 as follows. Issue 54078: Chell_headphone pop back from S3 (1)Play directly to hw, bypassing CRAS: sox -b 16 -n -t alsa hw:0,0 synth sine 200 sine 200 (2)Close lid or powerd_dbus_suspend, then press a key to resume. (3)no audio after resume (4)Audio will be back after close then reopen the pcm device. After verification, we find one defect is that semaphone lock is not long enough and expired. In this situation, the playback comes back early but pauses a while to wait for the crosstalk detection done. But the detection spends too much time and lock time is up. Therefore, the playback and jack detection sequence interfere to each other. That breaks sequence and makes noise. The driver extends the lock time for the issue. Signed-off-by: John Hsu <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2016-11-30ASoC: intel: Replace kthread with workTakashi Iwai7-48/+24
The usage pattern of kthread worker in Intel SST drivers can be replaced gracefully with the normal workqueue, which is more light- weight and easier to manage in general. Let's do it. While in the replacement, move the schedule_work() call inside the spinlock for excluding the race, too. Signed-off-by: Takashi Iwai <[email protected]> Acked-by: Vinod Koul <[email protected]> Tested-by: Subhransu S. Prusty <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2016-11-30ASoC: arizona: Use component pin control functionsRichard Fitzgerald6-9/+18
We need to modify the state of some of our own pins and are currently not taking account that the pin name may have a name_prefix applied to it. Replace the snd_soc_dapm_x_pin functions with the equivalent snd_soc_component_x_pin functions so that any name_prefix will be handled automatically. Signed-off-by: Richard Fitzgerald <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2016-11-30Merge branch 'topic/dapm-pin' of ↵Mark Brown2-0/+219
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-arizona
2016-11-30ASoC: core: Add component pin control functionsRichard Fitzgerald2-0/+219
It's often the case that a codec driver will need to control its own pins. However, if a name_prefix has been applied to this codec it must be included in the name passed to any of the snd_soc_dapm_x_pin() functions. The behaviour of the existing pin control functions is reasonable, since you may want to search for a fully-specified name within the scope of an entire card. This means that we can't apply the prefix in these functions because it will break card-scope searches. Constructing a prefixed string "manually" in codec drivers leads to a lot of repetition of the same code. To make this tidier in codec drivers this patch adds a new set of equivalent functions that take a struct snd_soc_component instead of a dapm context and automatically add the component's name_prefix to the given name. This makes it a simple change in codec drivers to be prefix-safe. The new functions are not quite trivial enough to be inlines and the compiler won't be able to compile-away any part of them. Although it looks somewhat inefficient to have to allocate a temporary buffer and combine strings, the current design of the widget list doesn't lend itself to a more optimized implementation - it's a single list of all widgets on a card and is searched linearly for a matching string. As pin state changes are generally low-frequency events it's unlikely to be a significant issue - at least not enough to rewrite the widget list handling just for this. Signed-off-by: Richard Fitzgerald <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2016-11-30vxlan: fix a potential issue when create a new vxlan fdb entry.Haishuang Yan1-3/+7
vxlan_fdb_append may return error, so add the proper check, otherwise it will cause memory leak. Signed-off-by: Haishuang Yan <[email protected]> Changes in v2: - Unnecessary to initialize rc to zero. Acked-by: Jiri Benc <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-30Input: change KEY_DATA from 0x275 to 0x277Ping Cheng1-1/+1
0x275 is used by KEY_FASTREVERSE. Fixes: 488326947cd1 ("Input: add HDMI CEC specific keycodes") Signed-off-by: Ping Cheng <[email protected]> Acked-by: Hans Verkuil <[email protected]> Cc: [email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2016-11-30ASoC: rt5670: Add missing 10EC5072 ACPI IDTakashi Iwai1-0/+1
rt5670 driver supports also RT5672 codec, but its ACPI ID is missing. This was found on Dell Wyse 3040 box. Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2016-11-30ASoC: rt5670: Enable Braswell platform workaround for Dell Wyse 3040Takashi Iwai1-0/+7
Dell Wyse 3040 requires the platform workaround for enabling dmic and jack detection as defined for Braswell CRB. Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2016-11-30ASoC: Intel: Add missing 10EC5672 ACPI ID matching for Cherry TrailTakashi Iwai1-0/+2
Add the missing ACPI ID 10EC5672 for Cherry Trail, which bounds with cht-bsw-rt5672 driver. This combination was found on Dell Wyse 3040. Signed-off-by: Takashi Iwai <[email protected]> Acked-by: Vinod Koul <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2016-11-30openvswitch: Fix skb leak in IPv6 reassembly.Daniele Di Proietto1-1/+4
If nf_ct_frag6_gather() returns an error other than -EINPROGRESS, it means that we still have a reference to the skb. We should free it before returning from handle_fragments, as stated in the comment above. Fixes: daaa7d647f81 ("netfilter: ipv6: avoid nf_iterate recursion") CC: Florian Westphal <[email protected]> CC: Pravin B Shelar <[email protected]> CC: Joe Stringer <[email protected]> Signed-off-by: Daniele Di Proietto <[email protected]> Acked-by: Pravin B Shelar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-30crypto: rsa - Add Makefile dependencies to fix parallel buildsDavid Michael1-0/+1
Both asn1 headers are included by rsa_helper.c, so rsa_helper.o should explicitly depend on them. Signed-off-by: David Michael <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2016-11-30crypto: chcr - Fix memory corruptionHarsh Jain1-1/+2
Fix memory corruption done by *((u32 *)dec_key + k) operation. Signed-off-by: Jitendra Lulla <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2016-11-30crypto: drbg - prevent invalid SG mappingsStephan Mueller2-5/+26
When using SGs, only heap memory (memory that is valid as per virt_addr_valid) is allowed to be referenced. The CTR DRBG used to reference the caller-provided memory directly in an SG. In case the caller provided stack memory pointers, the SG mapping is not considered to be valid. In some cases, this would even cause a paging fault. The change adds a new scratch buffer that is used unconditionally to catch the cases where the caller-provided buffer is not suitable for use in an SG. The crypto operation of the CTR DRBG produces its output with that scratch buffer and finally copies the content of the scratch buffer to the caller's buffer. The scratch buffer is allocated during allocation time of the CTR DRBG as its access is protected with the DRBG mutex. Signed-off-by: Stephan Mueller <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2016-11-30esp6: Fix integrity verification when ESN are usedTobias Brunner1-1/+1
When handling inbound packets, the two halves of the sequence number stored on the skb are already in network order. Fixes: 000ae7b2690e ("esp6: Switch to new AEAD interface") Signed-off-by: Tobias Brunner <[email protected]> Acked-by: Herbert Xu <[email protected]> Signed-off-by: Steffen Klassert <[email protected]>
2016-11-30esp4: Fix integrity verification when ESN are usedTobias Brunner1-1/+1
When handling inbound packets, the two halves of the sequence number stored on the skb are already in network order. Fixes: 7021b2e1cddd ("esp4: Switch to new AEAD interface") Signed-off-by: Tobias Brunner <[email protected]> Acked-by: Herbert Xu <[email protected]> Signed-off-by: Steffen Klassert <[email protected]>
2016-11-30drm/i915: drop the struct_mutex when wedged or trying to resetMatthew Auld1-1/+2
We grab the struct_mutex in intel_crtc_page_flip, but if we are wedged or a reset is in progress we bail early but never seem to actually release the lock. Fixes: 7f1847ebf48b ("drm/i915: Simplify checking of GPU reset_counter in display pageflips") Cc: Chris Wilson <[email protected]> Signed-off-by: Matthew Auld <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Joonas Lahtinen <[email protected]> Reviewed-by: Chris Wilson <[email protected]> Signed-off-by: Chris Wilson <[email protected]> Cc: <[email protected]> # v4.7+ (cherry picked from commit ddbb271aea87fc6004d3c8bcdb0710e980c7ec85) Signed-off-by: Jani Nikula <[email protected]>
2016-11-30drm/i915: Don't touch NULL sg on i915_gem_object_get_pages_gtt() errorChris Wilson1-2/+3
On the DMA mapping error path, sg may be NULL (it has already been marked as the last scatterlist entry), and we should avoid dereferencing it again. Reported-by: Dan Carpenter <[email protected]> Fixes: e227330223a7 ("drm/i915: avoid leaking DMA mappings") Signed-off-by: Chris Wilson <[email protected]> Cc: Imre Deak <[email protected]> Cc: [email protected] Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Matthew Auld <[email protected]> (cherry picked from commit b17993b7b29612369270567643bcff814f4b3d7f) Signed-off-by: Jani Nikula <[email protected]>
2016-11-30xfrm_user: fix return value from xfrm_user_rcv_msgYi Zhao1-1/+1
It doesn't support to run 32bit 'ip' to set xfrm objdect on 64bit host. But the return value is unknown for user program: ip xfrm policy list RTNETLINK answers: Unknown error 524 Replace ENOTSUPP with EOPNOTSUPP: ip xfrm policy list RTNETLINK answers: Operation not supported Signed-off-by: Yi Zhao <[email protected]> Signed-off-by: Steffen Klassert <[email protected]>
2016-11-30drm: Don't call drm_for_each_crtc with a non-KMS driverMichel Dänzer1-4/+6
Fixes oops if userspace calls DRM_IOCTL_GET_CAP for DRM_CAP_PAGE_FLIP_TARGET on a non-KMS device node. (Normal userspace doesn't do that, discovered by syzkaller) Reported-by: Dmitry Vyukov <[email protected]> Fixes: f837297ad824 ("drm: Add DRM_MODE_PAGE_FLIP_TARGET_ABSOLUTE/RELATIVE flags v2") Cc: [email protected] Signed-off-by: Michel Dänzer <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
2016-11-30Merge branch 'for-upstream/hdlcd' of git://linux-arm.org/linux-ld into drm-fixesDave Airlie1-1/+1
Thanks for pulling the previous patch for HDLCD. Unfortunately, yesterday Robin Murphy discovered another issue while playing with CMA allocation sizes, which he has submitted a fix for. * 'for-upstream/hdlcd' of git://linux-arm.org/linux-ld: drm: hdlcd: Fix cleanup order
2016-11-29Merge branch 'fixed-phy-phydev-leaks'David S. Miller18-54/+152
Johan Hovold says: ==================== net: fix fixed-link phydev leaks This series fixes failures to deregister and free fixed-link phydevs that have been registered using the of_phy_register_fixed_link() interface. All but two drivers currently fail to do this and this series fixes most of them with the exception of a staging driver and the stmmac drivers which will be fixed by follow-on patches. Included are also a couple of fixes for related of-node leaks. Note that all patches except the of_mdio one have been compile-tested only. Also note that the series is against net due to dependencies not yet in net-next. ==================== Signed-off-by: David S. Miller <[email protected]>
2016-11-29net: dsa: slave: fix fixed-link phydev leaksJohan Hovold1-1/+11
Make sure to deregister and free any fixed-link PHY registered using of_phy_register_fixed_link() on slave-setup errors and on slave destroy. Fixes: 0d8bcdd383b8 ("net: dsa: allow for more complex PHY setups") Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-29net: ethernet: ti: davinci_emac: fix fixed-link phydev and of-node leaksJohan Hovold1-1/+9
Make sure to deregister and free any fixed-link PHY registered using of_phy_register_fixed_link() on probe errors and on driver unbind. Also remember to put the of-node reference on probe errors. Fixes: 1bb6aa56bb38 ("net: davinci_emac: Add support for fixed-link PHY") Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-29net: ethernet: dwc_eth_qos: fix fixed-link phydev leaksJohan Hovold1-7/+13
Make sure to deregister and free any fixed-link PHY registered using of_phy_register_fixed_link() on probe errors and on driver unbind. Fixes: 077742dac2c7 ("dwc_eth_qos: Add support for Synopsys DWC Ethernet QoS") Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-29net: ethernet: renesas: ravb: fix fixed-link phydev leaksJohan Hovold1-3/+14
Make sure to deregister and free any fixed-link PHY registered using of_phy_register_fixed_link() on initialisation errors and on device close after having disconnected the PHY. Fixes: b4bc88a868ed ("ravb: Add fixed-link support") Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-29net: ethernet: mediatek: fix fixed-link phydev leaksJohan Hovold1-0/+4
Make sure to deregister and free any fixed-link PHY registered using of_phy_register_fixed_link() on initialisation errors and on uninit. Fixes: 0c72c50f6f93 ("net-next: mediatek: add fixed-phy support") Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-29net: ethernet: marvell: mvneta: fix fixed-link phydev leaksJohan Hovold1-0/+5
Make sure to deregister and free any fixed-link PHY registered using of_phy_register_fixed_link() on probe errors and on driver unbind. Fixes: 83895bedeee6 ("net: mvneta: add support for fixed links") Signed-off-by: Johan Hovold <[email protected]> Reviewed-by: Thomas Petazzoni <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-29net: ethernet: ucc_geth: fix fixed-link phydev leaksJohan Hovold1-7/+16
Make sure to deregister and free any fixed-link PHY registered using of_phy_register_fixed_link() on probe errors and on driver unbind. Fixes: 87009814cdbb ("ucc_geth: use the new fixed PHY helpers") Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-29net: ethernet: gianfar: fix fixed-link phydev leaksJohan Hovold1-0/+8
Make sure to deregister and free any fixed-link PHY registered using of_phy_register_fixed_link() on probe errors and on driver unbind. Fixes: be40364544bd ("gianfar: use the new fixed PHY helpers") Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-29net: ethernet: fs_enet: fix fixed-link phydev leaksJohan Hovold1-1/+6
Make sure to deregister and free any fixed-link PHY registered using of_phy_register_fixed_link() on probe errors and on driver unbind. Fixes: bb74d9a4a87b ("fs_enet: use the new fixed PHY helpers") Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-29net: ethernet: fec: fix fixed-link phydev leaksJohan Hovold1-0/+5
Make sure to deregister and free any fixed-link PHY registered using of_phy_register_fixed_link() on probe errors and on driver unbind. Fixes: 407066f8f371 ("net: fec: Support phys probed from devicetree and fixed-link") Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-29net: ethernet: bcmgenet: fix fixed-link phydev leaksJohan Hovold1-0/+6
Make sure to deregister and free any fixed-link PHY registered using of_phy_register_fixed_link() on probe errors and on driver unbind. Note that we're still leaking any fixed-link PHY registered in the non-OF probe path. Fixes: 9abf0c2b717a ("net: bcmgenet: use the new fixed PHY helpers") Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-29net: ethernet: bcmsysport: fix fixed-link phydev leaksJohan Hovold1-5/+12
Make sure to deregister and free any fixed-link PHY registered using of_phy_register_fixed_link() on probe errors and on driver unbind. Fixes: 186534a3f832 ("net: systemport: use the new fixed PHY helpers") Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-29net: ethernet: aurora: nb8800: fix fixed-link phydev leaksJohan Hovold1-2/+7
Make sure to deregister and free any fixed-link PHY registered using of_phy_register_fixed_link() on probe errors and on driver unbind. Fixes: c7dfe3abf40e ("net: ethernet: nb8800: support fixed-link DT node") Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-29net: ethernet: altera: fix fixed-link phydev leaksJohan Hovold1-1/+8
Make sure to deregister and free any fixed-link PHY registered using of_phy_register_fixed_link() on probe errors and on driver unbind. Fixes: 7cdbc6f74f8e ("altera tse: add support for fixed-links.") Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-29of_mdio: add helper to deregister fixed-link PHYsJohan Hovold4-24/+23
Add helper to deregister fixed-link PHYs registered using of_phy_register_fixed_link(). Convert the two drivers that care to deregister their fixed-link PHYs to use the new helper, but note that most drivers currently fail to do so. Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-29net: dsa: slave: fix of-node leak and phy priorityJohan Hovold1-2/+5
Make sure to drop the reference taken by of_parse_phandle() before returning from dsa_slave_phy_setup(). Note that this also modifies the PHY priority so that any fixed-link node is only parsed when no phy-handle is given, which is in accordance with the common scheme for this. Fixes: 0d8bcdd383b8 ("net: dsa: allow for more complex PHY setups") Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-30Merge branch 'drm-fixes-4.9' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie3-5/+22
into drm-fixes Regression fixes for PX and a powerplay fix. * 'drm-fixes-4.9' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: fix check for port PM availability drm/amdgpu: fix check for port PM availability drm/amd/powerplay: initialize the soft_regs offset in struct smu7_hwmgr
2016-11-29Merge tag 'arc-4.9-final' of ↵Linus Torvalds3-6/+7
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fixes from Vineet Gupta: - fix PAE40 crash [Yuriy] - disable IO-Coherency by default - use a different inline asm constraint for Zero Overhead loops * tag 'arc-4.9-final' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: mm: PAE40: Fix crash at munmap ARC: mm: IOC: Don't enable IOC by default ARC: Don't use "+l" inline asm constraint
2016-11-29GSO: Reload iph after pskb_may_pullArnaldo Carvalho de Melo1-1/+1
As it may get stale and lead to use after free. Acked-by: Eric Dumazet <[email protected]> Cc: Alexander Duyck <[email protected]> Cc: Andrey Konovalov <[email protected]> Fixes: cbc53e08a793 ("GSO: Add GSO type for fixed IPv4 ID") Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Acked-by: Alexander Duyck <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-29sched: cls_flower: remove from hashtable only in case skip sw flag is not setJiri Pirko1-4/+6
Be symmetric to hashtable insert and remove filter from hashtable only in case skip sw flag is not set. Fixes: e69985c67c33 ("net/sched: cls_flower: Introduce support in SKIP SW flag") Signed-off-by: Jiri Pirko <[email protected]> Reviewed-by: Amir Vadai <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-29net/dccp: fix use-after-free in dccp_invalid_packetEric Dumazet1-5/+7
pskb_may_pull() can reallocate skb->head, we need to reload dh pointer in dccp_invalid_packet() or risk use after free. Bug found by Andrey Konovalov using syzkaller. Signed-off-by: Eric Dumazet <[email protected]> Reported-by: Andrey Konovalov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-29net: macb: ensure ordering write to re-enable RX smoothlyZumeng Chen1-0/+2
When a hardware issue happened as described by inline comments, the register write pattern looks like the following: <write ~MACB_BIT(RE)> + wmb(); <write MACB_BIT(RE)> There might be a memory barrier between these two write operations, so add wmb to ensure an flip from 0 to 1 for NCR. Signed-off-by: Zumeng Chen <[email protected]> Acked-by: Nicolas Ferre <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-29net: macb: fix the RX queue reset in macb_rx()Cyrille Pitchen1-2/+1
On macb only (not gem), when a RX queue corruption was detected from macb_rx(), the RX queue was reset: during this process the RX ring buffer descriptor was initialized by macb_init_rx_ring() but we forgot to also set bp->rx_tail to 0. Indeed, when processing the received frames, bp->rx_tail provides the macb driver with the index in the RX ring buffer of the next buffer to process. So when the whole ring buffer is reset we must also reset bp->rx_tail so the driver is synchronized again with the hardware. Since macb_init_rx_ring() is called from many locations, currently from macb_rx() and macb_init_rings(), we'd rather add the "bp->rx_tail = 0;" line inside macb_init_rx_ring() than add the very same line after each call of this function. Without this fix, the rx queue is not reset properly to recover from queue corruption and connection drop may occur. Signed-off-by: Cyrille Pitchen <[email protected]> Fixes: 9ba723b081a2 ("net: macb: remove BUG_ON() and reset the queue to handle RX errors") Acked-by: Nicolas Ferre <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.