aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2010-04-09drm/nv50: Fix NEWCTX_DONE flag numberMarcin Kościelnicki1-3/+3
Signed-off-by: Marcin Kościelnicki <[email protected]> Signed-off-by: Ben Skeggs <[email protected]>
2010-04-08iwlwifi: need check for valid qos packet before freeWey-Yi Guy1-4/+9
For 4965, need to check it is valid qos frame before free, only valid QoS frame has the tid used to free the packets. Signed-off-by: Wey-Yi Guy <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2010-04-08loop: Update mtime when writing using aopsNikanth Karthikesan1-0/+2
Update mtime when writing to backing filesystem using the address space operations write_begin and write_end. Signed-off-by: Nikanth Karthikesan <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2010-04-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds3-4/+59
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: not overwriting file_lock structure after GET_LK cifs: Fix a kernel BUG with remote OS/2 server (try #3) [CIFS] initialize nbytes at the beginning of CIFSSMBWrite() [CIFS] Add mmap for direct, nobrl cifs mount types
2010-04-08tcp: Set CHECKSUM_UNNECESSARY in tcp_init_nondata_skbDavid S. Miller1-0/+1
Back in commit 04a0551c87363f100b04d28d7a15a632b70e18e7 ("loopback: Drop obsolete ip_summed setting") we stopped setting CHECKSUM_UNNECESSARY in the loopback xmit. This is because such a setting was a lie since it implies that the checksum field of the packet is properly filled in. Instead what happens normally is that CHECKSUM_PARTIAL is set and skb->csum is calculated as needed. But this was only happening for TCP data packets (via the skb->ip_summed assignment done in tcp_sendmsg()). It doesn't happen for non-data packets like ACKs etc. Fix this by setting skb->ip_summed in the common non-data packet constructor. It already is setting skb->csum to zero. But this reminds us that we still have things like ip_output.c's ip_dev_loopback_xmit() which sets skb->ip_summed to the value CHECKSUM_UNNECESSARY, which Herbert's patch teaches us is not valid. So we'll have to address that at some point too. Signed-off-by: David S. Miller <[email protected]>
2010-04-08udp: fix for unicast RX path optimizationJorge Boncompte [DTI2]2-4/+4
Commits 5051ebd275de672b807c28d93002c2fb0514a3c9 and 5051ebd275de672b807c28d93002c2fb0514a3c9 ("ipv[46]: udp: optimize unicast RX path") broke some programs. After upgrading a L2TP server to 2.6.33 it started to fail, tunnels going up an down, after the 10th tunnel came up. My modified rp-l2tp uses a global unconnected socket bound to (INADDR_ANY, 1701) and one connected socket per tunnel after parameter negotiation. After ten sockets were open and due to mixed parameters to udp[46]_lib_lookup2() kernel started to drop packets. Signed-off-by: Jorge Boncompte [DTI2] <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-04-08Merge branch 'upstream-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: Fix accesses at LBA28 boundary (old bug, but nasty) (v2)
2010-04-08libata: Fix accesses at LBA28 boundary (old bug, but nasty) (v2)Mark Lord1-2/+2
Most drives from Seagate, Hitachi, and possibly other brands, do not allow LBA28 access to sector number 0x0fffffff (2^28 - 1). So instead use LBA48 for such accesses. This bug could bite a lot of systems, especially when the user has taken care to align partitions to 4KB boundaries. On misaligned systems, it is less likely to be encountered, since a 4KB read would end at 0x10000000 rather than at 0x0fffffff. Signed-off-by: Mark Lord <[email protected]> Signed-off-by: Jeff Garzik <[email protected]>
2010-04-08Merge branch 'sched-fixes-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: Fix sched_getaffinity()
2010-04-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6Linus Torvalds5-6/+6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6: ide: Fix IDE taskfile with cfq scheduler ide: Must hold queue lock when requeueing ide: Requeue request after DMA timeout
2010-04-08Merge branch 'release' of ↵Linus Torvalds10-98/+131
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI / PM: Move ACPI video resume to a PM notifier ACPI: Reduce ACPI resource conflict message to KERN_WARNING, printk cleanup ACPI: battery drivers should call power_supply_changed() ACPI: battery: Fix CONFIG_ACPI_SYSFS_POWER=n PNPACPI: truncate _CRS windows with _LEN > _MAX - _MIN + 1 ACPI: Don't send KEY_UNKNOWN for random video notifications ACPI: NUMA: map pxms to low node ids ACPI: use _HID when supplied by root-level devices ACPI / ACPICA: Do not check reference counters in acpi_ev_enable_gpe() ACPI: fixes a false alarm from lockdep ACPI dock: support multiple ACPI dock devices ACPI: EC: Allow multibyte access to EC
2010-04-08udf: add speciffic ->setattr callbackDmitry Monakhov4-4/+12
generic setattr not longer responsible for quota transfer. use udf_setattr for all udf's inodes. Signed-off-by: Dmitry Monakhov <[email protected]> Signed-off-by: Jan Kara <[email protected]>
2010-04-08udf: potential integer overflowDan Carpenter1-6/+4
bloc->logicalBlockNum is unsigned so it's never less than zero. When I saw that, it made me worry that "bloc->logicalBlockNum + count" could overflow. That's why I changed the check for less than zero to an overflow check. (The test works because "count" is also unsigned.) Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Jan Kara <[email protected]>
2010-04-08Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6Russell King14-70/+382
Conflicts: arch/arm/mach-mx3/mach-pcm037.c
2010-04-07myri10ge: fix rx_pause in myri10ge_set_pauseparamBrice Goglin1-1/+1
Fix rx_pause management in myri10ge_set_pauseparam(). Signed-off-by: Brice Goglin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-04-07net: corrected documentation for hardware time stampingPatrick Loschmidt1-30/+46
The current documentation for hardware time stamping does not correctly specify the available kernel functions since the implementation was changed later on. Signed-off-by: Patrick Loschmidt <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-04-07stmmac: use resource_size()Dan Carpenter1-5/+5
Resource size should be calculated as end - start + 1 because we start counting at zero. I changed the code to resource_size() to do the calculation. Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-04-07x.25 attempts to negotiate invalid throughputJohn Hughes2-7/+28
The current X.25 code has some bugs in throughput negotiation: 1. It does negotiation in all cases, usually there is no need 2. It incorrectly attempts to negotiate the throughput class in one direction only. There are separate throughput classes for input and output and if either is negotiated both mist be negotiates. This is bug https://bugzilla.kernel.org/show_bug.cgi?id=15681 This bug was first reported by Daniel Ferenci to the linux-x25 mailing list on 6/8/2004, but is still present. The current (2.6.34) x.25 code doesn't seem to know that the X.25 throughput facility includes two values, one for the required throughput outbound, one for inbound. This causes it to attempt to negotiate throughput 0x0A, which is throughput 9600 inbound and the illegal value "0" for inbound throughput. Because of this some X.25 devices (e.g. Cisco 1600) refuse to connect to Linux X.25. The following patch fixes this behaviour. Unless the user specifies a required throughput it does not attempt to negotiate. If the user does not specify a throughput it accepts the suggestion of the remote X.25 system. If the user requests a throughput then it validates both the input and output throughputs and correctly negotiates them with the remote end. Signed-off-by: John Hughes <[email protected]> Tested-by: Andrew Hendry <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-04-07x25: Patch to fix bug 15678 - x25 accesses fields beyond end of packet.John Hughes4-6/+72
Here is a patch to stop X.25 examining fields beyond the end of the packet. For example, when a simple CALL ACCEPTED was received: 10 10 0f x25_parse_facilities was attempting to decode the FACILITIES field, but this packet contains no facilities field. Signed-off-by: John Hughes <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-04-07bridge: Fix IGMP3 report parsingHerbert Xu1-1/+1
The IGMP3 report parsing is looking at the wrong address for group records. This patch fixes it. Reported-by: Banyeer <[email protected]> Signed-off-by: Herbert Xu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-04-07cnic: Fix crash during bnx2x MTU change.Michael Chan1-5/+5
cnic_service_bnx2x() irq handler can be called during chip reset from MTU change. Need to check that the cnic's device state is up before handling the irq. Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-04-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linusLinus Torvalds4-51/+54
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: hvc_console: Fix race between hvc_close and hvc_remove virtio: disable multiport console support. virtio: console makes incorrect assumption about virtio API virtio: console: Fix early_put_chars usage MAINTAINERS: Put the virtio-console entry in correct alphabetical order
2010-04-08hvc_console: Fix race between hvc_close and hvc_removeAnton Blanchard1-4/+0
I don't claim to understand the tty layer, but it seems like hvc_open and hvc_close should be balanced in their kref reference counting. Right now we get a kref every call to hvc_open: if (hp->count++ > 0) { tty_kref_get(tty); <----- here spin_unlock_irqrestore(&hp->lock, flags); hvc_kick(); return 0; } /* else count == 0 */ tty->driver_data = hp; hp->tty = tty_kref_get(tty); <------ or here if hp->count was 0 But hvc_close has: tty_kref_get(tty); if (--hp->count == 0) { ... /* Put the ref obtained in hvc_open() */ tty_kref_put(tty); ... } tty_kref_put(tty); Since the outside kref get/put balance we only do a single kref_put when count reaches 0. The patch below changes things to call tty_kref_put once for every hvc_close call, and with that my machine boots fine. Signed-off-by: Anton Blanchard <[email protected]> Acked-by: Amit Shah <[email protected]> Signed-off-by: Rusty Russell <[email protected]>
2010-04-08virtio: disable multiport console support.Michael S. Tsirkin2-31/+41
Move MULTIPORT feature and related config changes out of exported headers, and disable the feature at runtime. At this point, it seems less risky to keep code around until we can enable it than rip it out completely. Signed-off-by: Michael S. Tsirkin <[email protected]> Signed-off-by: Rusty Russell <[email protected]>
2010-04-08virtio: console makes incorrect assumption about virtio APIRusty Russell1-7/+3
The get_buf() API sets the second arg to the number of bytes *written* by the other side; in this case it should be zero as these are output buffers. lguest gets this right (obviously kvm's console doesn't), resulting in continual buildup of console writes. Signed-off-by: Rusty Russell <[email protected]> Acked-by: Amit Shah <[email protected]>
2010-04-08virtio: console: Fix early_put_chars usageFrançois Diakhaté1-3/+3
Currently early_put_chars is not used by virtio_console because it can only be used once a port has been found, at which point it's too late because it is no longer needed. This patch should fix it. Acked-by: Christian Borntraeger <[email protected]> Signed-off-by: Amit Shah <[email protected]> Signed-off-by: Rusty Russell <[email protected]>
2010-04-08MAINTAINERS: Put the virtio-console entry in correct alphabetical orderAmit Shah1-6/+7
Move around the entry for virtio-console to keep the file sorted. Signed-off-by: Amit Shah <[email protected]> Signed-off-by: Rusty Russell <[email protected]>
2010-04-07Merge branch 'vhost' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostDavid S. Miller1-0/+4
2010-04-07qlcnic: fix set mac addrAmit Kumar Salecha1-0/+3
If interface is down, mac address request are not sent to fw but it is getting add in driver mac list. Driver mac list should be in sync with fw i.e addresses communicated to fw. Signed-off-by: Amit Kumar Salecha <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-04-07r6040: fix r6040_multicast_listFlorian Fainelli1-7/+4
As reported in <https://bugzilla.kernel.org/show_bug.cgi?id=15355>, r6040_ multicast_list currently crashes. This is due a wrong maximum of multicast entries. This patch fixes the following issues with multicast: - number of maximum entries if off-by-one (4 instead of 3) - the writing of the hash table index is not necessary and leads to invalid values being written into the MCR1 register, so the MAC is simply put in a non coherent state - when we exceed the maximum number of mutlticast address, writing the broadcast address should be done in registers MID_1{L,M,H} instead of MID_O{L,M,H}, otherwise we would loose the adapter's MAC address Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-04-07Merge branch 'master' of ↵David S. Miller9-60/+153
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-04-07rwsem generic spinlock: use IRQ save/restore spinlocksKevin Hilman1-6/+8
rwsems can be used with IRQs disabled, particularily in early boot before IRQs are enabled. Currently the spin_unlock_irq() usage in the slow-patch will unconditionally enable interrupts and cause problems since interrupts are not yet initialized or enabled. This patch uses save/restore versions of IRQ spinlocks in the slowpath to ensure interrupts are not unintentionally disabled. Signed-off-by: Kevin Hilman <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2010-04-07Have nfs ->d_revalidate() report errors properlyAl Viro1-2/+1
If nfs atomic open implementation ends up doing open request from ->d_revalidate() codepath and gets an error from server, return that error to caller explicitly and don't bother with lookup_instantiate_filp() at all. ->d_revalidate() can return an error itself just fine... See http://bugzilla.kernel.org/show_bug.cgi?id=15674 http://marc.info/?l=linux-kernel&m=126988782722711&w=2 for original report. Reported-by: Daniel J Blueman <[email protected]> Signed-off-by: Al Viro <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2010-04-07IB/mlx4: Check correct variable for allocation failureDan Carpenter1-1/+1
The intent here is to check the "mfrpl->mapped_page_list" allocation. We checked "mfrpl->ibfrpl.page_list" earlier. Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Roland Dreier <[email protected]>
2010-04-07RDMA/nes: Correct cap.max_inline_data assignment in nes_query_qp()Chien Tung1-5/+4
cap.max_inline_data is incorrectly set in init_attr instead of attr. Set it in attr so subsequent init_attr.cap assignment will get the correct value. Signed-off-by: Chien Tung <[email protected]> Signed-off-by: Roland Dreier <[email protected]>
2010-04-07RDMA/cm: Set num_paths when manually assigning path recordsSean Hefty1-0/+1
When manually assigning the path records to use for a connection, save the number of paths that were set. Otherwise, checks against num_path will show 0, even though path record data is available. This was discovered by manually setting the path records from user space, then querying the kernel to see if the correct path records were assigned, only to discover that the kernel returned 0 path records to the query. Signed-off-by: Sean Hefty <[email protected]> Signed-off-by: Roland Dreier <[email protected]>
2010-04-07Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds2-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf, x86: Enable Nehalem-EX support perf kmem: Fix breakage introduced by 5a0e3ad slab.h script
2010-04-07ARM: 6031/1: fix Thumb-2 decompressorRabin Vincent1-1/+1
98e12b5a6e05413 ("ARM: Fix decompressor's kernel size estimation for ROM=y") broke the Thumb-2 decompressor because it added an entry in the LC0 table but didn't adjust the offset the Thumb-2 code uses to load the SP from that table. Fix it. Cc: stable <[email protected]> Signed-off-by: Rabin Vincent <[email protected]> Signed-off-by: Russell King <[email protected]>
2010-04-07ARM: 6029/1: ep93xx: gpio.c: local functions should be staticHartley Sweeten1-3/+3
The functions ep93xx_gpio_update_int_params and ep93xx_gpio_int_mask are not exported and should be static. This was overlooked when moving the code from core.c. Also, change a comment to better indicate what the code is for. Signed-off-by: H Hartley Sweeten <[email protected]> Acked-by: Ryan Mallon <[email protected]> Signed-off-by: Russell King <[email protected]>
2010-04-07ARM: 6028/1: ARM: add MAINTAINERS for U300Linus Walleij1-0/+10
This adds myself as maintainer of the U300 machine and associated system-on-chip drivers. Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: Russell King <[email protected]>
2010-04-07ARM: 6024/1: bcmring: fix missing down on semaphore in dma.cLeo Chen1-3/+10
Added missing down on the memMap->lock semaphore. Also fixed a return statement so that we always exit with an up (i.e. early exit via return is not allowed) Signed-off-by: Leo Hao Chen <[email protected]> Signed-off-by: Russell King <[email protected]>
2010-04-07Merge branch 'davinci-fixes-for-linus' of ↵Linus Torvalds4-5/+13
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci * 'davinci-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci: davinci: fix compile warning: <mach/da8xx.h>: #include <linux/platform_device.h> davinci: DM365: fix duplicate default IRQ priorities davinci: edma: clear events in edma_start() davinci: da8xx/omap-l1: fix build error when CONFIG_DAVINCI_MUX is undefined davinci: timers: don't enable timer until clocksource is initialized
2010-04-07Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds10-26/+82
git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip: x86: Fix double enable_IR_x2apic() call on SMP kernel on !SMP boards x86: Increase CONFIG_NODES_SHIFT max to 10 ibft, x86: Change reserve_ibft_region() to find_ibft_region() x86, hpet: Fix bug in RTC emulation x86, hpet: Erratum workaround for read after write of HPET comparator bootmem, x86: Fix 32bit numa system without RAM on node 0 nobootmem, x86: Fix 32bit numa system without RAM on node 0 x86: Handle overlapping mptables x86: Make e820_remove_range to handle all covered case x86-32, resume: do a global tlb flush in S4 resume
2010-04-07davinci: fix compile warning: <mach/da8xx.h>: #include <linux/platform_device.h>Sergei Shtylyov1-1/+3
This hushes the following warning: arch/arm/mach-davinci/include/mach/da8xx.h:104: warning: ‘struct platform_device’ declared inside parameter list arch/arm/mach-davinci/include/mach/da8xx.h:104: warning: its scope is only this definition or declaration, which is probably not what you want Signed-off-by: Sergei Shtylyov <[email protected]> Signed-off-by: Kevin Hilman <[email protected]>
2010-04-07Merge branch 'for-linus' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds5-12/+10
* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Remove unused variable from ptrace microblaze: io.h: Add io big-endian function microblaze: Enable memory leak detector microblaze: Fix futex code microblaze: Fix ftrace_update_ftrace_func panic
2010-04-07Merge branch 'for-linus' of ↵Linus Torvalds36-212/+408
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: mixart: range checking proc file ALSA: hda - Fix a wrong array range check in patch_realtek.c ALSA: ASoC: move dma_data from snd_soc_dai to snd_soc_pcm_stream ALSA: hda - Enable amplifiers on Acer Inspire 6530G ASoC: Only do WM8994 bias off transition from standby ASoC: Don't use DCS_DATAPATH_BUSY for WM hubs devices ASoC: Don't do runtime wm_hubs DC servo updates if using offset correction ASoC: Support second DC servo readback method for wm_hubs ASoC: Avoid wraparound in wm_hubs DC servo correction ALSA: echoaudio - Eliminate use after free ALSA: i2c: cleanup: change parameter to pointer ALSA: hda - Add MSI blacklist for Aopen MZ915-M ASoC: OMAP: Fix capture pointer handling for OMAP1510 to work correctly with recent ALSA PCM code ALSA: hda - Update document about MSI and interrupts ALSA: hda: Fix 0 dB offset for Lenovo Thinkpad models using AD1981 ALSA: hda - Add missing printk argument in previous patch ASoC: Fix passing platform_data to ac97 bus users and fix a leak ALSA: hda - Fix ADC/MUX assignment of ALC269 codec ALSA: hda - Fix invalid bit values passed to snd_hda_codec_amp_stereo() ASoC: wm8994: playback => capture
2010-04-07Merge branch 'slabh' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/miscLinus Torvalds1-1/+1
* 'slabh' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc: nodemask: include slab.h from drivers/base/node.c
2010-04-07fs-cache: order the debugfs stats correctlyDavid Howells1-2/+2
Order the debugfs statistics correctly. The values displayed through a seq_printf() statement should be in the same order as the names in the format string. In the 'Lookups' line, objects created ('crt=') and lookups timed out ('tmo=') have their values transposed. Signed-off-by: David Howells <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2010-04-07frv: fix kernel/user segment handling in NOMMU modeDavid Howells2-5/+3
In NOMMU mode, the FRV segment handling is broken because KERNEL_DS == USER_DS. This causes tests of the following sort: /* don't pin down non-user-based iovecs */ if (segment_eq(get_fs(), KERNEL_DS)) return NULL; to malfunction. To fix this, make USER_DS the top of RAM instead of the top of the non-IO address space, and make KERNEL_DS one more than the top of the non-IO address space. Also get rid of FRV's __addr_ok() as nothing uses it. Signed-off-by: David Howells <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2010-04-07frv: hide uncached_access() when pgprot_noncached is not #definedDavid Howells1-0/+2
Hide uncached_access() when pgprot_noncached is not #defined. This prevents the following warning: CC drivers/char/mem.o drivers/char/mem.c:229: warning: 'uncached_access' defined but not used Repairs d7d4d849b4e3acc405ec222884936800ffb26d48 ("drivers/char/mem.c: cleanups"). Signed-off-by: David Howells <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.