aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-06-25ALSA: seq: Fix missing channel at encoding RPN/NRPN MIDI2 messagesTakashi Iwai1-3/+5
The conversion from the legacy event to MIDI2 UMP for RPN and NRPN missed the setup of the channel number, resulting in always the channel 0. Fix it. Fixes: e9e02819a98a ("ALSA: seq: Automatic conversion of UMP events") Link: https://patch.msgid.link/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2024-06-24ASoC: Intel: sof_sdw: select PINCTRL_CS42L43 and SPI_CS42L43Bard Liao1-0/+2
Cs42l43 bridge mode needs the two configurations. Signed-off-by: Bard Liao <[email protected]> Signed-off-by: Pierre-Louis Bossart <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-24ASoC: Intel: sof_sdw: add quirk for Dell SKU 0B8CPierre-Louis Bossart1-0/+9
Jack detection needs to rely on JD2, as most other Dell AlderLake-based devices. Closes: https://github.com/thesofproject/linux/issues/5021 Signed-off-by: Pierre-Louis Bossart <[email protected]> Reviewed-by: Péter Ujfalusi <[email protected]> Reviewed-by: Bard Liao <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-24ASoC: Intel: maxim-common: add max_98373_get_tx_mask functionBrent Lu1-13/+43
Add a helper function max_98373_get_tx_mask() to get tx mask from max98373 ACPI device properties at runtime. Reviewed-by: Bard Liao <[email protected]> Signed-off-by: Brent Lu <[email protected]> Signed-off-by: Pierre-Louis Bossart <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-24ASoC: Intel: sof_sdw: fix jack detection on ADL-N variant RVPPierre-Louis Bossart1-0/+9
Experimental tests show that JD2_100K is required, otherwise the jack is detected always even with nothing plugged-in. To avoid matching with other known quirks the SKU information is used. Signed-off-by: Pierre-Louis Bossart <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-24ASoc: tas2781: Add name_prefix as the prefix name of firmwares and kcontrol ↵Shenghao Ding3-4/+11
to support corresponding TAS2563/TAS2781s Add name_prefix as the prefix name of firmwares and kcontrol to support corresponding TAS2563/TAS2781s. name_prefix is not mandatory. Signed-off-by: Shenghao Ding <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-24ASoC: SOF: ipc4-topology: Use correct queue_id for requesting input pin formatPeter Ujfalusi1-13/+15
It is incorrect to request the input pin format of the destination widget using the output pin index of the source module as the indexes are not necessarily matching. moduleA.out_pin1 can be connected to moduleB.in_pin0 for example. Use the dst_queue_id to request the input format of the destination module. This bug remained unnoticed likely because in nocodec topologies we don't have process modules after a module copier, thus the pin/queue index is ignored. For the process module case, the code was likely have been tested in a controlled way where all the pin/queue/format properties were present to work. Update the debug prints to have better information. Reviewed-by: Kai Vehmanen <[email protected]> Reviewed-by: Ranjani Sridharan <[email protected]> Reviewed-by: Bard Liao <[email protected]> Signed-off-by: Peter Ujfalusi <[email protected]> Signed-off-by: Pierre-Louis Bossart <[email protected]> Cc: [email protected] # v6.8+ Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-24ASoC: mediatek: mt6358: Add "Dmic Mode Switch" kcontrol for switch DMIC mode.Jiaxin Yu1-1/+37
There are two hardware connection methods for DMICs on the MT6358. In cases where more than two DMICs are used, we need to time-multiplex these DMICs. Therefore, we need to dynamically switch the modes of these DMICs based on the actual usage scenarios. ---- DMIC1 AU_VIN0 --- ---- DMIC2 AU_VIN2 --- ----DMIC3 When we want to use DMIC1/2, configure it to one-wire mode. When we want to use DMIC1/3, configure it to two-wire mode. Signed-off-by: Jiaxin Yu <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-24ASoC: codecs: ES8326: regcache_sync error issueZhang Yi1-0/+18
We modified the regmap_config members to fix cach sync error. There are several registers that should be read-only registers. If these registers are written while synchronizing the register values, the codec will enter an error state.So we create es8326_writeable_register, and set these registers to false Signed-off-by: Zhang Yi <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-24ASoC: codecs: ES8326: Minimize the pop noiseZhang Yi1-7/+24
Executing regcache_sync at initialization, we can hear a gentle pop noise. So we created es8326_init for initialization instead of executing es8326_resume Signed-off-by: Zhang Yi <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-24ASoC: codecs: ES8326: Slove headphone detection issueZhang Yi1-5/+6
We modified the headphone detection setting to avoid an error button state after codec resume from suspend state Signed-off-by: Zhang Yi <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-24ASoC: mediatek: mt8195: Add platform entry for ETDM1_OUT_BE dai linkChen-Yu Tsai1-0/+1
Commit e70b8dd26711 ("ASoC: mediatek: mt8195: Remove afe-dai component and rework codec link") removed the codec entry for the ETDM1_OUT_BE dai link entirely instead of replacing it with COMP_EMPTY(). This worked by accident as the remaining COMP_EMPTY() platform entry became the codec entry, and the platform entry became completely empty, effectively the same as COMP_DUMMY() since snd_soc_fill_dummy_dai() doesn't do anything for platform entries. This causes a KASAN out-of-bounds warning in mtk_soundcard_common_probe() in sound/soc/mediatek/common/mtk-soundcard-driver.c: for_each_card_prelinks(card, i, dai_link) { if (adsp_node && !strncmp(dai_link->name, "AFE_SOF", strlen("AFE_SOF"))) dai_link->platforms->of_node = adsp_node; else if (!dai_link->platforms->name && !dai_link->platforms->of_node) dai_link->platforms->of_node = platform_node; } where the code expects the platforms array to have space for at least one entry. Add an COMP_EMPTY() entry so that dai_link->platforms has space. Fixes: e70b8dd26711 ("ASoC: mediatek: mt8195: Remove afe-dai component and rework codec link") Signed-off-by: Chen-Yu Tsai <[email protected]> Reviewed-by: AngeloGioacchino Del Regno <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-23ASoC: nau8822: add MCLK supportMark Brown2-17/+60
Merge series from Andrejs Cainikovs <[email protected]>: This change adds local MCLK handling, which would cover a case when a reference audio clock is present in a system, but is not allowed to be changed, see [1]. [1]: https://lore.kernel.org/all/[email protected]/
2024-06-23ASoC: qcom: display port changesMark Brown5-0/+99
Merge series from [email protected]: This patchset adds support for. 1. parse Display Port module tokens from ASoC topology 2. add support to DP/HDMI Jack events. 3. fixes a typo in function name in sm8250 Verified these patches on X13s along with changes to tplg in https://git.codelinaro.org/linaro/qcomlt/audioreach-topology/-/tree/topic/x13s-dp?ref_type=heads and ucm changes from https://github.com/Srinivas-Kandagatla/alsa-ucm-conf/tree/topic/x13s-dp x1e80100 is verified by Krzysztof with his changes in tplg https://git.codelinaro.org/linaro/qcomlt/audioreach-topology/-/merge_requests/7/commits
2024-06-23ASoC: Few constifications (mostly arguments)Mark Brown13-55/+58
Merge series from Krzysztof Kozlowski <[email protected]>: Make few pointers in ASoC functions as pointers to const, so the code is clearer to read, a bit safer and allows further constifications (e.g. placing some data as rodata).
2024-06-23ASoC: Add ak4619 codec supportMark Brown4-0/+981
Merge series from Kuninori Morimoto <[email protected]>: This is v3 patch-set for ak4619 driver. It was created by Khanh, and I updated/adjusted to upstream. It was tested on Renesas V4M GrayH Link: https://lore.kernel.org/r/[email protected] Link: https://lore.kernel.org/r/[email protected]
2024-06-23ASoC: add compatible for ti,pcm5242Mark Brown3-1/+5
Merge series from Christian Hewitt <[email protected]>: Update bindings and add a driver compatible for the pcm5242 chip used on the Odroid HiFi-Shield2 i2c mezzanine board.
2024-06-23ASoC: codecs: wcd family: cleanupsMark Brown13-185/+60
Merge series from Krzysztof Kozlowski <[email protected]>: Set of simple cleanups from similar issues in all Qualcomm WCD93xx codecs. The first patch "ASoC: codecs: wcd-mbhc: Constify passed MBHC reg fields" is a requirement for few others, but except this they are independent.
2024-06-23ASoC: dt-bindings: convert everest,es7134.txt &Mark Brown4-43/+129
Merge series from Neil Armstrong <[email protected]>: Convert the text bindings of the Everest ES7241/ES7134/7144/7154 2 channels I2S analog to digital converter to dt-schema.
2024-06-23tlv320adc3xxx: Allow MICBIAS pins to be used asMark Brown2-21/+108
Merge series from Ricard Wanderlof <[email protected]>: In some cases, depending on system design, the MICBIAS pins on the chip are not needed as such, but a couple of extra GPIO pins would be useful. This patch allows the MICBIAS pins to be configured in the device tree as general purpose output pins, controlled via the GPIO framework. Owing to their originally intended purpose there are some limitations: when the MICBIAS pins are deactivated, they will float, so will likely need a pulldown in many applications. When activated, they will assume the voltage specified by the micbias1-vg and micbias2-vg properties, respectively, meaning that the resulting output voltage will be 2.0 V, 2.5 V or AVDD .
2024-06-23Cirrus Logic Family of ADCsMark Brown6-0/+1364
Merge series from Paul Handrigan <[email protected]>: This patchset provides ASoC support for the latest family of Cirrus Logic multichannel, high performance audio ADCs. The devices that are supported are CS5302 (2 channel ADC), CS5304 (4 channel ADC), and CS5308 (8 channel ADC).
2024-06-22ASoC: dt-bindings: add ti,pcm5242 to pcm512xChristian Hewitt1-1/+1
Add ti,pcm5242 to the pcm512x driver file Signed-off-by: Christian Hewitt <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-22ASoC: Add support for ti,pcm5242 to the pcm512x driverChristian Hewitt2-0/+4
Add a compatible string to enable support for the ti,pcm5242 DAC chip in the pcm512x driver. Signed-off-by: Christian Hewitt <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-22ASoC: cs530x: Support for cs530x ADCsPaul Handrigan5-0/+1279
Add support for the cs530x family of high performance ADCs. Signed-off-by: Paul Handrigan <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-22ASoC: dt-bindings: cirrus,cs530x: Add initial DT bindingPaul Handrigan1-0/+85
Add the YAML DT bindings for the cs530x high performance audio ADCs. Signed-off-by: Paul Handrigan <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-21ASoc: PCM6240: Return directly after a failed devm_kzalloc() in ↵Hao Ge1-4/+2
pcmdevice_i2c_probe() The value “-ENOMEM” was assigned to the local variable “ret” in one if branch after a devm_kzalloc() call failed at the beginning. This error code will trigger then a pcmdevice_remove() call with a passed null pointer so that an undesirable dereference will be performed. Thus return the appropriate error code directly. Fixes: 1324eafd37aa ("ASoc: PCM6240: Create PCM6240 Family driver code") Signed-off-by: Hao Ge <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-21ASoC: amd: acp: add pcm constraints for buffer size and period sizeVijendar Mukunda1-0/+14
ACP common dma driver has a buffer size and period size restriction which should be 64 byte aligned. Add pcm constraints for the same. Signed-off-by: Vijendar Mukunda <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-21ASoC: amd: acp: move i2s clock generation sequenceVijendar Mukunda1-2/+2
I2S clock generation registers should be programmed before starting the I2S dma when I2S controller is programmed as clock master. Move i2s clock generation register programming sequence prior to i2s dma start. Signed-off-by: Vijendar Mukunda <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-21ASoC: amd: acp: modify conditional check for programming i2s mclkVijendar Mukunda3-4/+7
ACP provides different IO configurations(ACP PDM, I2S and SoundWire). I2S mclk should be programmed only when I2S configuration is selected and I2S controller is programmed as clock master. Modify the conditional check for programming i2s mclk. Signed-off-by: Vijendar Mukunda <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-21ASoC: amd: acp: remove unused variables from acp_resource structureVijendar Mukunda5-10/+0
Remove unused variables i2s_pin_cfg_offset and i2s_mode from acp_resource structure entries. Signed-off-by: Vijendar Mukunda <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-21ASoC: amd: acp: remove acp_i2s_probe functionVijendar Mukunda1-14/+0
In acp_i2s_probe(), acp_base null check is verified. As already acp_base null check will be verified in acp platform driver probe sequence, additional NULL check in acp_i2s_probe() is not needed. Remove acp_i2s_probe() function. Signed-off-by: Vijendar Mukunda <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-21ASoC: Merge up fixesMark Brown26-74/+144
We need some of the AMD fixes as a base for new work.
2024-06-21ALSA: hda: Use imply for suggesting CONFIG_SERIAL_MULTI_INSTANTIATETakashi Iwai1-2/+2
The recent fix introduced a reverse selection of CONFIG_SERIAL_MULTI_INSTANTIATE, but its condition isn't always met. Use a weak reverse selection to suggest the config for avoiding such inconsistencies, instead. Fixes: 9b1effff19cd ("ALSA: hda: cs35l56: Select SERIAL_MULTI_INSTANTIATE") Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/ Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/ Reviewed-by: Richard Fitzgerald <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2024-06-21ALSA: hda/realtek: Add quirk for Lenovo Yoga Pro 7 14AHP9Pablo Caño1-0/+1
Lenovo Yoga Pro 7 14AHP9 (PCI SSID 17aa:3891) seems requiring a similar workaround like Yoga 9 model and Yoga 7 Pro 14APH8 for the bass speaker. Cc: <[email protected]> Link: https://lore.kernel.org/all/[email protected]/ Signed-off-by: Pablo Caño <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2024-06-20ASoC: fsl-asoc-card: set priv->pdev before using itElinor Montmasson1-1/+2
priv->pdev pointer was set after being used in fsl_asoc_card_audmux_init(). Move this assignment at the start of the probe function, so sub-functions can correctly use pdev through priv. fsl_asoc_card_audmux_init() dereferences priv->pdev to get access to the dev struct, used with dev_err macros. As priv is zero-initialised, there would be a NULL pointer dereference. Note that if priv->dev is dereferenced before assignment but never used, for example if there is no error to be printed, the driver won't crash probably due to compiler optimisations. Fixes: 708b4351f08c ("ASoC: fsl: Add Freescale Generic ASoC Sound Card with ASRC support") Signed-off-by: Elinor Montmasson <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-20ASoC: dt-bindings: convert everest,es7134.txt to dt-schemaNeil Armstrong2-15/+62
Convert the text bindings of the Everest ES7134/7144/7154 2 channels I2S analog to digital converter to dt-schema. Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Link: https://patch.msgid.link/20240620-topic-amlogic-upstream-bindings-convert-everest-v2-2-660985615522@linaro.org Signed-off-by: Mark Brown <[email protected]>
2024-06-20ASoC: dt-bindings: convert everest,es7241.txt to dt-schemaNeil Armstrong2-28/+67
Convert the text biddings for the Everest ES7241 2 channels I2S analog to digital converter to dt-schema. Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Link: https://patch.msgid.link/20240620-topic-amlogic-upstream-bindings-convert-everest-v2-1-660985615522@linaro.org Signed-off-by: Mark Brown <[email protected]>
2024-06-20ASoC: dt-bindings: add missing vender prefix on filenameKuninori Morimoto12-12/+12
Many Sound yaml files doesn't have vender prefix on filename. Add missing vender prefix for these files. Signed-off-by: Kuninori Morimoto <[email protected]> Reviewed-by: Daniel Baluta <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-20ALSA: hda: cs35l56: Select SERIAL_MULTI_INSTANTIATESimon Trimmer1-0/+2
The ACPI IDs used in the CS35L56 HDA drivers are all handled by the serial multi-instantiate driver which starts multiple Linux device instances from a single ACPI Device() node. As serial multi-instantiate is not an optional part of the system add it as a dependency in Kconfig so that it is not overlooked. Signed-off-by: Simon Trimmer <[email protected]> Link: https://lore.kernel.org/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2024-06-19ASoC: amd: acp: move chip->flag variable assignmentVijendar Mukunda1-1/+1
chip->flag variable assignment will be skipped when acp platform device creation is skipped. In this case chip>flag value will not be set. chip->flag variable should be assigned along with other structure variables for 'chip' structure. Move chip->flag variable assignment prior to acp platform device creation. Fixes: 3a94c8ad0aae ("ASoC: amd: acp: add code for scanning acp pdm controller") Signed-off-by: Vijendar Mukunda <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-19ASoC: amd: acp: remove i2s configuration check in acp_i2s_probe()Vijendar Mukunda1-8/+0
ACP supports different pin configurations for I2S IO. Checking ACP pin configuration value against specific value breaks the functionality for other I2S pin configurations. This check is no longer required in i2s dai driver probe call as i2s configuration check will be verified during acp platform device creation sequence. Remove i2s_mode check in acp_i2s_probe() function. Fixes: b24484c18b10 ("ASoC: amd: acp: ACP code generic to support newer platforms") Signed-off-by: Vijendar Mukunda <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-19ASoC: amd: acp: add a null check for chip_pdev structureVijendar Mukunda1-4/+6
When acp platform device creation is skipped, chip->chip_pdev value will remain NULL. Add NULL check for chip->chip_pdev structure in snd_acp_resume() function to avoid null pointer dereference. Fixes: 088a40980efb ("ASoC: amd: acp: add pm ops support for acp pci driver") Signed-off-by: Vijendar Mukunda <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-19ASoC: rt1318: Add RT1318 audio amplifier driverJack Yu5-0/+1719
This is the initial i2s-based amplifier driver for rt1318. Signed-off-by: Jack Yu <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-19ASoC: dt-bindings: ak4619: Add initial DT bindingKuninori Morimoto1-0/+62
Add Asahi Kasei ak4619 audio codec bindings. Signed-off-by: Kuninori Morimoto <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-19ASoC: Add ak4619 codec supportKhanh Le3-0/+919
Add support for the Asahi Kasei AK4619 audio codec. [Kuninori cleanuped and adjusted to upstream code] Signed-off-by: Khanh Le <[email protected]> Signed-off-by: Kuninori Morimoto <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-19ASoC: cs35l56: Accept values greater than 0 as IRQ numbersSimon Trimmer1-1/+1
IRQ lookup functions such as those in ACPI can return error values when an IRQ is not defined. The i2c core driver converts the error codes to a value of 0 and the SPI bus driver passes them unaltered to client device drivers. The cs35l56 driver should only accept positive non-zero values as IRQ numbers. Signed-off-by: Simon Trimmer <[email protected]> Fixes: 8a731fd37f8b ("ASoC: cs35l56: Move utility functions to shared file") Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-18ASoC: Intel: soc-acpi: mtl: fix speaker no sound on Dell SKU 0C64Shuming Fan1-1/+1
Dell SKU 0C64 has a single rt1318 amplifier. The prefix name of control still needs to be set rt1318-1 corresponding to UCM config. Signed-off-by: Shuming Fan <[email protected]> Reviewed-by: Bard Liao <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-18ASoC: codecs: wcd939x: Drop unused num_ports fieldKrzysztof Kozlowski1-1/+0
The driver does not use few 'num_ports' in 'struct wcd939x_sdw_priv'. Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Link: https://msgid.link/r/20240612-asoc-wcd9xxx-wide-cleanups-v1-23-0d15885b2a06@linaro.org Signed-off-by: Mark Brown <[email protected]>
2024-06-18ASoC: codecs: wcd939x: Drop unused RX/TX direction enumKrzysztof Kozlowski1-5/+0
The enum with RX/TX soundwire direction is not used. Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Link: https://msgid.link/r/20240612-asoc-wcd9xxx-wide-cleanups-v1-22-0d15885b2a06@linaro.org Signed-off-by: Mark Brown <[email protected]>
2024-06-18ASoC: codecs: wcd939x: Constify wcd939x_sdw_ch_infoKrzysztof Kozlowski3-4/+4
Driver does not modify static wcd939x_sdw_ch_info array, so it can be made const for code safety. Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Link: https://msgid.link/r/20240612-asoc-wcd9xxx-wide-cleanups-v1-21-0d15885b2a06@linaro.org Signed-off-by: Mark Brown <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.