aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2017-08-24net: bcmgenet: Be drop monitor friendlyFlorian Fainelli1-3/+3
There are 3 spots where we call dev_kfree_skb() but we are actually just doing a normal SKB consumption: __bcmgenet_tx_reclaim() for normal TX reclamation, bcmgenet_alloc_rx_buffers() during the initial RX ring setup and bcmgenet_free_rx_buffers() during RX ring cleanup. Fixes: d6707bec5986 ("net: bcmgenet: rewrite bcmgenet_rx_refill()") Fixes: f48bed16a756 ("net: bcmgenet: Free skb after last Tx frag") Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-24bpf: fix bpf_setsockopts return valueYuchung Cheng1-1/+0
This patch fixes a bug causing any sock operations to always return EINVAL. Fixes: a5192c52377e ("bpf: fix to bpf_setsockops"). Reported-by: Neal Cardwell <[email protected]> Signed-off-by: Yuchung Cheng <[email protected]> Acked-by: Neal Cardwell <[email protected]> Acked-by: Craig Gallek <[email protected]> Acked-by: Daniel Borkmann <[email protected]> Acked-by: Lawrence Brakmo <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-24net: systemport: Be drop monitor friendlyFlorian Fainelli1-1/+1
Utilize dev_consume_skb_any(cb->skb) in bcm_sysport_free_cb() which is used when a TX packet is completed, as well as when the RX ring is cleaned on shutdown. None of these two cases are packet drops, so be drop monitor friendly. Suggested-by: Eric Dumazet <[email protected]> Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-25Merge tag 'drm-misc-fixes-2017-08-24' of ↵Dave Airlie1-3/+3
git://anongit.freedesktop.org/git/drm-misc into drm-fixes Core Changes: - Release driver tracking before making the object available again (Chris) Cc: Chris Wilson <[email protected]> * tag 'drm-misc-fixes-2017-08-24' of git://anongit.freedesktop.org/git/drm-misc: drm: Release driver tracking before making the object available again
2017-08-25Merge tag 'drm-intel-fixes-2017-08-24' of ↵Dave Airlie6-12/+36
git://anongit.freedesktop.org/git/drm-intel into drm-fixes drm/i915 fixes for v4.13-rc7 * tag 'drm-intel-fixes-2017-08-24' of git://anongit.freedesktop.org/git/drm-intel: drm/i915/gvt: Fix the kernel null pointer error drm/i915: Clear lost context-switch interrupts across reset drm/i915/bxt: use NULL for GPIO connection ID drm/i915/cnl: Fix LSPCON support. drm/i915/vbt: ignore extraneous child devices for a port drm/i915: Initialize 'data' in intel_dsi_dcs_backlight.c
2017-08-24Input: ALPS - fix two-finger scroll breakage in right side on ALPS touchpadMasaki Ota2-10/+39
Fixed the issue that two finger scroll does not work correctly on V8 protocol. The cause is that V8 protocol X-coordinate decode is wrong at SS4 PLUS device. I added SS4 PLUS X decode definition. Mote notes: the problem manifests itself by the commit e7348396c6d5 ("Input: ALPS - fix V8+ protocol handling (73 03 28)"), where a fix for the V8+ protocol was applied. Although the culprit must have been present beforehand, the two-finger scroll worked casually even with the wrongly reported values by some reason. It got broken by the commit above just because it changed x_max value, and this made libinput correctly figuring the MT events. Since the X coord is reported as falsely doubled, the events on the right-half side go outside the boundary, thus they are no longer handled. This resulted as a broken two-finger scroll. One finger event is decoded differently, and it didn't suffer from this problem. The problem was only about MT events. --tiwai Fixes: e7348396c6d5 ("Input: ALPS - fix V8+ protocol handling (73 03 28)") Signed-off-by: Masaki Ota <[email protected]> Tested-by: Takashi Iwai <[email protected]> Tested-by: Paul Donohue <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2017-08-24Merge tag 'for-linus' of ↵Linus Torvalds5-6/+22
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull more rdma fixes from Doug Ledford: "Well, I thought we were going to be done for this -rc cycle. I should have known better than to say so though. We have four additional items that trickled in. One was a simple mistake on my part. I took a patch into my for-next thinking that the issue was less severe than it was. I was then notified that it needed to be in my -rc area instead. The other three were just found late in testing. Summary: - One core fix accidentally applied first to for-next and then cherry picked back because it needed to be in the -rc cycles instead - Another core fix - Two mlx5 fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: IB/mlx5: Always return success for RoCE modify port IB/mlx5: Fix Raw Packet QP event handler assignment IB/core: Avoid accessing non-allocated memory when inferring port type RDMA/uverbs: Initialize cq_context appropriately
2017-08-24net: sunrpc: svcsock: fix NULL-pointer exceptionVadim Lomovtsev1-2/+20
While running nfs/connectathon tests kernel NULL-pointer exception has been observed due to races in svcsock.c. Race is appear when kernel accepts connection by kernel_accept (which creates new socket) and start queuing ingress packets to new socket. This happens in ksoftirq context which could run concurrently on a different core while new socket setup is not done yet. The fix is to re-order socket user data init sequence and add write/read barrier calls to be sure that we got proper values for callback pointers before actually calling them. Test results: nfs/connectathon reports '0' failed tests for about 200+ iterations. Crash log: ---<-snip->--- [ 6708.638984] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 6708.647093] pgd = ffff0000094e0000 [ 6708.650497] [00000000] *pgd=0000010ffff90003, *pud=0000010ffff90003, *pmd=0000010ffff80003, *pte=0000000000000000 [ 6708.660761] Internal error: Oops: 86000005 [#1] SMP [ 6708.665630] Modules linked in: nfsv3 nfnetlink_queue nfnetlink_log nfnetlink rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache overlay xt_CONNSECMARK xt_SECMARK xt_conntrack iptable_security ip_tables ah4 xfrm4_mode_transport sctp tun binfmt_misc ext4 jbd2 mbcache loop tcp_diag udp_diag inet_diag rpcrdma ib_isert iscsi_target_mod ib_iser rdma_cm iw_cm libiscsi scsi_transport_iscsi ib_srpt target_core_mod ib_srp scsi_transport_srp ib_ipoib ib_ucm ib_uverbs ib_umad ib_cm ib_core nls_koi8_u nls_cp932 ts_kmp nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack vfat fat ghash_ce sha2_ce sha1_ce cavium_rng_vf i2c_thunderx sg thunderx_edac i2c_smbus edac_core cavium_rng nfsd auth_rpcgss nfs_acl lockd grace sunrpc xfs libcrc32c nicvf nicpf ast i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops [ 6708.736446] ttm drm i2c_core thunder_bgx thunder_xcv mdio_thunder mdio_cavium dm_mirror dm_region_hash dm_log dm_mod [last unloaded: stap_3c300909c5b3f46dcacd49aab3334af_87021] [ 6708.752275] CPU: 84 PID: 0 Comm: swapper/84 Tainted: G W OE 4.11.0-4.el7.aarch64 #1 [ 6708.760787] Hardware name: www.cavium.com CRB-2S/CRB-2S, BIOS 0.3 Mar 13 2017 [ 6708.767910] task: ffff810006842e80 task.stack: ffff81000689c000 [ 6708.773822] PC is at 0x0 [ 6708.776739] LR is at svc_data_ready+0x38/0x88 [sunrpc] [ 6708.781866] pc : [<0000000000000000>] lr : [<ffff0000029d7378>] pstate: 60000145 [ 6708.789248] sp : ffff810ffbad3900 [ 6708.792551] x29: ffff810ffbad3900 x28: ffff000008c73d58 [ 6708.797853] x27: 0000000000000000 x26: ffff81000bbe1e00 [ 6708.803156] x25: 0000000000000020 x24: ffff800f7410bf28 [ 6708.808458] x23: ffff000008c63000 x22: ffff000008c63000 [ 6708.813760] x21: ffff800f7410bf28 x20: ffff81000bbe1e00 [ 6708.819063] x19: ffff810012412400 x18: 00000000d82a9df2 [ 6708.824365] x17: 0000000000000000 x16: 0000000000000000 [ 6708.829667] x15: 0000000000000000 x14: 0000000000000001 [ 6708.834969] x13: 0000000000000000 x12: 722e736f622e676e [ 6708.840271] x11: 00000000f814dd99 x10: 0000000000000000 [ 6708.845573] x9 : 7374687225000000 x8 : 0000000000000000 [ 6708.850875] x7 : 0000000000000000 x6 : 0000000000000000 [ 6708.856177] x5 : 0000000000000028 x4 : 0000000000000000 [ 6708.861479] x3 : 0000000000000000 x2 : 00000000e5000000 [ 6708.866781] x1 : 0000000000000000 x0 : ffff81000bbe1e00 [ 6708.872084] [ 6708.873565] Process swapper/84 (pid: 0, stack limit = 0xffff81000689c000) [ 6708.880341] Stack: (0xffff810ffbad3900 to 0xffff8100068a0000) [ 6708.886075] Call trace: [ 6708.888513] Exception stack(0xffff810ffbad3710 to 0xffff810ffbad3840) [ 6708.894942] 3700: ffff810012412400 0001000000000000 [ 6708.902759] 3720: ffff810ffbad3900 0000000000000000 0000000060000145 ffff800f79300000 [ 6708.910577] 3740: ffff000009274d00 00000000000003ea 0000000000000015 ffff000008c63000 [ 6708.918395] 3760: ffff810ffbad3830 ffff800f79300000 000000000000004d 0000000000000000 [ 6708.926212] 3780: ffff810ffbad3890 ffff0000080f88dc ffff800f79300000 000000000000004d [ 6708.934030] 37a0: ffff800f7930093c ffff000008c63000 0000000000000000 0000000000000140 [ 6708.941848] 37c0: ffff000008c2c000 0000000000040b00 ffff81000bbe1e00 0000000000000000 [ 6708.949665] 37e0: 00000000e5000000 0000000000000000 0000000000000000 0000000000000028 [ 6708.957483] 3800: 0000000000000000 0000000000000000 0000000000000000 7374687225000000 [ 6708.965300] 3820: 0000000000000000 00000000f814dd99 722e736f622e676e 0000000000000000 [ 6708.973117] [< (null)>] (null) [ 6708.977824] [<ffff0000086f9fa4>] tcp_data_queue+0x754/0xc5c [ 6708.983386] [<ffff0000086fa64c>] tcp_rcv_established+0x1a0/0x67c [ 6708.989384] [<ffff000008704120>] tcp_v4_do_rcv+0x15c/0x22c [ 6708.994858] [<ffff000008707418>] tcp_v4_rcv+0xaf0/0xb58 [ 6709.000077] [<ffff0000086df784>] ip_local_deliver_finish+0x10c/0x254 [ 6709.006419] [<ffff0000086dfea4>] ip_local_deliver+0xf0/0xfc [ 6709.011980] [<ffff0000086dfad4>] ip_rcv_finish+0x208/0x3a4 [ 6709.017454] [<ffff0000086e018c>] ip_rcv+0x2dc/0x3c8 [ 6709.022328] [<ffff000008692fc8>] __netif_receive_skb_core+0x2f8/0xa0c [ 6709.028758] [<ffff000008696068>] __netif_receive_skb+0x38/0x84 [ 6709.034580] [<ffff00000869611c>] netif_receive_skb_internal+0x68/0xdc [ 6709.041010] [<ffff000008696bc0>] napi_gro_receive+0xcc/0x1a8 [ 6709.046690] [<ffff0000014b0fc4>] nicvf_cq_intr_handler+0x59c/0x730 [nicvf] [ 6709.053559] [<ffff0000014b1380>] nicvf_poll+0x38/0xb8 [nicvf] [ 6709.059295] [<ffff000008697a6c>] net_rx_action+0x2f8/0x464 [ 6709.064771] [<ffff000008081824>] __do_softirq+0x11c/0x308 [ 6709.070164] [<ffff0000080d14e4>] irq_exit+0x12c/0x174 [ 6709.075206] [<ffff00000813101c>] __handle_domain_irq+0x78/0xc4 [ 6709.081027] [<ffff000008081608>] gic_handle_irq+0x94/0x190 [ 6709.086501] Exception stack(0xffff81000689fdf0 to 0xffff81000689ff20) [ 6709.092929] fde0: 0000810ff2ec0000 ffff000008c10000 [ 6709.100747] fe00: ffff000008c70ef4 0000000000000001 0000000000000000 ffff810ffbad9b18 [ 6709.108565] fe20: ffff810ffbad9c70 ffff8100169d3800 ffff810006843ab0 ffff81000689fe80 [ 6709.116382] fe40: 0000000000000bd0 0000ffffdf979cd0 183f5913da192500 0000ffff8a254ce4 [ 6709.124200] fe60: 0000ffff8a254b78 0000aaab10339808 0000000000000000 0000ffff8a0c2a50 [ 6709.132018] fe80: 0000ffffdf979b10 ffff000008d6d450 ffff000008c10000 ffff000008d6d000 [ 6709.139836] fea0: 0000000000000054 ffff000008cd3dbc 0000000000000000 0000000000000000 [ 6709.147653] fec0: 0000000000000000 0000000000000000 0000000000000000 ffff81000689ff20 [ 6709.155471] fee0: ffff000008085240 ffff81000689ff20 ffff000008085244 0000000060000145 [ 6709.163289] ff00: ffff81000689ff10 ffff00000813f1e4 ffffffffffffffff ffff00000813f238 [ 6709.171107] [<ffff000008082eb4>] el1_irq+0xb4/0x140 [ 6709.175976] [<ffff000008085244>] arch_cpu_idle+0x44/0x11c [ 6709.181368] [<ffff0000087bf3b8>] default_idle_call+0x20/0x30 [ 6709.187020] [<ffff000008116d50>] do_idle+0x158/0x1e4 [ 6709.191973] [<ffff000008116ff4>] cpu_startup_entry+0x2c/0x30 [ 6709.197624] [<ffff00000808e7cc>] secondary_start_kernel+0x13c/0x160 [ 6709.203878] [<0000000001bc71c4>] 0x1bc71c4 [ 6709.207967] Code: bad PC value [ 6709.211061] SMP: stopping secondary CPUs [ 6709.218830] Starting crashdump kernel... [ 6709.222749] Bye! ---<-snip>--- Signed-off-by: Vadim Lomovtsev <[email protected]> Reviewed-by: Jeff Layton <[email protected]> Cc: [email protected] Signed-off-by: J. Bruce Fields <[email protected]>
2017-08-24nfsd: Limit end of page list when decoding NFSv4 WRITEChuck Lever1-4/+2
When processing an NFSv4 WRITE operation, argp->end should never point past the end of the data in the final page of the page list. Otherwise, nfsd4_decode_compound can walk into uninitialized memory. More critical, nfsd4_decode_write is failing to increment argp->pagelen when it increments argp->pagelist. This can cause later xdr decoders to assume more data is available than really is, which can cause server crashes on malformed requests. Signed-off-by: Chuck Lever <[email protected]> Cc: [email protected] Signed-off-by: J. Bruce Fields <[email protected]>
2017-08-24Merge tag 'acpi-4.13-rc7' of ↵Linus Torvalds5-16/+15
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These fix two recent regressions (in ACPICA and in the ACPI EC driver) and one bug in code introduced during the 4.12 cycle (ACPI device properties library routine). Specifics: - Fix a regression in the ACPI EC driver causing a kernel to crash during initialization on some systems due to a code ordering issue exposed by a recent change (Lv Zheng). - Fix a recent regression in ACPICA due to a change of the behavior of a library function in a way that is not backwards compatible with some existing callers of it (Rafael Wysocki). - Fix a coding mistake in a library function related to the handling of ACPI device properties introduced during the 4.12 cycle (Sakari Ailus)" * tag 'acpi-4.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: device property: Fix node lookup in acpi_graph_get_child_prop_value() ACPICA: Fix acpi_evaluate_object_typed() ACPI: EC: Fix regression related to wrong ECDT initialization order
2017-08-24Merge tag 'kbuild-fixes-v4.13' of ↵Linus Torvalds9-37/+48
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - fix linker script regression caused by dead code elimination support - fix typos and outdated comments - specify kselftest-clean as a PHONY target - fix "make dtbs_install" when $(srctree) includes shell special characters like '~' - Move -fshort-wchar to the global option list because defining it partially emits warnings * tag 'kbuild-fixes-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: update comments of Makefile.asm-generic kbuild: Do not use hyphen in exported variable name Makefile: add kselftest-clean to PHONY target list Kbuild: use -fshort-wchar globally fixdep: trivial: typo fix and correction kbuild: trivial cleanups on the comments kbuild: linker script do not match C names unless LD_DEAD_CODE_DATA_ELIMINATION is configured
2017-08-24Merge branch 'for-4.13-rc7' of ↵Linus Torvalds5-60/+64
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fix from David Sterba: "We have one more fixup that stems from the blk_status_t conversion that did not quite cover everything. The normal cases were not affected because the code is 0, but any error and retries could mix up new and old values" * 'for-4.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Btrfs: fix blk_status_t/errno confusion
2017-08-24Merge tag 'trace-v4.13-rc3' of ↵Linus Torvalds6-16/+38
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "Various bug fixes: - Two small memory leaks in error paths. - A missed return error code on an error path. - A fix to check the tracing ring buffer CPU when it doesn't exist (caused by setting maxcpus on the command line that is less than the actual number of CPUs, and then onlining them manually). - A fix to have the reset of boot tracers called by lateinit_sync() instead of just lateinit(). As some of the tracers register via lateinit(), and if the clear happens before the tracer is registered, it will never start even though it was told to via the kernel command line" * tag 'trace-v4.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix freeing of filter in create_filter() when set_str is false tracing: Fix kmemleak in tracing_map_array_free() ftrace: Check for null ret_stack on profile function graph entry function ring-buffer: Have ring_buffer_alloc_read_page() return error on offline CPU tracing: Missing error code in tracer_alloc_buffers() tracing: Call clear_boot_tracer() at lateinit_sync
2017-08-24tipc: Fix tipc_sk_reinit handling of -EAGAINBob Peterson1-3/+3
In 9dbbfb0ab6680c6a85609041011484e6658e7d3c function tipc_sk_reinit had additional logic added to loop in the event that function rhashtable_walk_next() returned -EAGAIN. No worries. However, if rhashtable_walk_start returns -EAGAIN, it does "continue", and therefore skips the call to rhashtable_walk_stop(). That has the effect of calling rcu_read_lock() without its paired call to rcu_read_unlock(). Since rcu_read_lock() may be nested, the problem may not be apparent for a while, especially since resize events may be rare. But the comments to rhashtable_walk_start() state: * ...Note that we take the RCU lock in all * cases including when we return an error. So you must always call * rhashtable_walk_stop to clean up. This patch replaces the continue with a goto and label to ensure a matching call to rhashtable_walk_stop(). Signed-off-by: Bob Peterson <[email protected]> Acked-by: Herbert Xu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-24Merge tag 'armsoc-fixes' of ↵Linus Torvalds6-6/+24
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "A small number of bugfixes, again nothing serious. - Alexander Dahl found multiple bugs in the Atmel memory interface driver - A randconfig build fix for at91 was incomplete, the second attempt fixes the remaining corner case - One fix for the TI Keystone queue handler - The Odroid XU4 HDMI port (added in 4.13) needs a small DT fix" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: exynos: add needs-hpd for Odroid-XU3/4 ARM: at91: don't select CONFIG_ARM_CPU_SUSPEND for old platforms soc: ti: knav: Add a NULL pointer check for kdev in knav_pool_create memory: atmel-ebi: Fix smc cycle xlate converter memory: atmel-ebi: Allow t_DF timings of zero ns memory: atmel-ebi: Fix smc timing return value evaluation
2017-08-24qlge: avoid memcpy buffer overflowArnd Bergmann1-1/+1
gcc-8.0.0 (snapshot) points out that we copy a variable-length string into a fixed length field using memcpy() with the destination length, and that ends up copying whatever follows the string: inlined from 'ql_core_dump' at drivers/net/ethernet/qlogic/qlge/qlge_dbg.c:1106:2: drivers/net/ethernet/qlogic/qlge/qlge_dbg.c:708:2: error: 'memcpy' reading 15 bytes from a region of size 14 [-Werror=stringop-overflow=] memcpy(seg_hdr->description, desc, (sizeof(seg_hdr->description)) - 1); Changing it to use strncpy() will instead zero-pad the destination, which seems to be the right thing to do here. The bug is probably harmless, but it seems like a good idea to address it in stable kernels as well, if only for the purpose of building with gcc-8 without warnings. Fixes: a61f80261306 ("qlge: Add ethtool register dump function.") Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-24pty: Repair TIOCGPTPEEREric W. Biederman4-53/+89
The implementation of TIOCGPTPEER has two issues. When /dev/ptmx (as opposed to /dev/pts/ptmx) is opened the wrong vfsmount is passed to dentry_open. Which results in the kernel displaying the wrong pathname for the peer. The second is simply by caching the vfsmount and dentry of the peer it leaves them open, in a way they were not previously Which because of the inreased reference counts can cause unnecessary behaviour differences resulting in regressions. To fix these move the ioctl into tty_io.c at a generic level allowing the ioctl to have access to the struct file on which the ioctl is being called. This allows the path of the slave to be derived when opening the slave through TIOCGPTPEER instead of requiring the path to the slave be cached. Thus removing the need for caching the path. A new function devpts_ptmx_path is factored out of devpts_acquire and used to implement a function devpts_mntget. The new function devpts_mntget takes a filp to perform the lookup on and fsi so that it can confirm that the superblock that is found by devpts_ptmx_path is the proper superblock. v2: Lots of fixes to make the code actually work v3: Suggestions by Linus - Removed the unnecessary initialization of filp in ptm_open_peer - Simplified devpts_ptmx_path as gotos are no longer required [ This is the fix for the issue that was reverted in commit 143c97cc6529, but this time without breaking 'pbuilder' due to increased reference counts - Linus ] Fixes: 54ebbfb16034 ("tty: add TIOCGPTPEER ioctl") Reported-by: Christian Brauner <[email protected]> Reported-and-tested-by: Stefan Lippers-Hollmann <[email protected]> Signed-off-by: "Eric W. Biederman" <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-08-24Merge branches 'acpica-fix', 'acpi-ec-fix' and 'acpi-properties-fix'Rafael J. Wysocki4-13/+8
* acpica-fix: ACPICA: Fix acpi_evaluate_object_typed() * acpi-ec-fix: ACPI: EC: Fix regression related to wrong ECDT initialization order * acpi-properties-fix: ACPI: device property: Fix node lookup in acpi_graph_get_child_prop_value()
2017-08-24um: Fix check for _xstate for older hostsFlorian Fainelli1-1/+1
Commit 0a987645672e ("um: Allow building and running on older hosts") attempted to check for PTRACE_{GET,SET}REGSET under the premise that these ptrace(2) parameters were directly linked with the presence of the _xstate structure. After Richard's commit 61e8d462457f ("um: Correctly check for PTRACE_GETRESET/SETREGSET") which properly included linux/ptrace.h instead of asm/ptrace.h, we could get into the original build failure that I reported: arch/x86/um/user-offsets.c: In function 'foo': arch/x86/um/user-offsets.c:54: error: invalid application of 'sizeof' to incomplete type 'struct _xstate' On this particular host, we do have PTRACE_GETREGSET and PTRACE_SETREGSET defined in linux/ptrace.h, but not the structure _xstate that should be pulled from the following include chain: signal.h -> bits/sigcontext.h. Correctly fix this by checking for FP_XSTATE_MAGIC1 which is the correct way to see if struct _xstate is available or not on the host. Fixes: 61e8d462457f ("um: Correctly check for PTRACE_GETRESET/SETREGSET") Fixes: 0a987645672e ("um: Allow building and running on older hosts") Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
2017-08-24IB/mlx5: Always return success for RoCE modify portMajd Dibbiny1-0/+6
CM layer calls ib_modify_port() regardless of the link layer. For the Ethernet ports, qkey violation and Port capabilities are meaningless. Therefore, always return success for ib_modify_port calls on the Ethernet ports. Cc: Selvin Xavier <[email protected]> Signed-off-by: Majd Dibbiny <[email protected]> Reviewed-by: Moni Shoua <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
2017-08-24IB/mlx5: Fix Raw Packet QP event handler assignmentMajd Dibbiny1-0/+1
In case we have SQ and RQ for Raw Packet QP, the SQ's event handler wasn't assigned. Fixing this by assigning event handler for each WQ after creation. [ 1877.145243] Call Trace: [ 1877.148644] <IRQ> [ 1877.150580] [<ffffffffa07987c5>] ? mlx5_rsc_event+0x105/0x210 [mlx5_core] [ 1877.159581] [<ffffffffa0795bd7>] ? mlx5_cq_event+0x57/0xd0 [mlx5_core] [ 1877.167137] [<ffffffffa079208e>] mlx5_eq_int+0x53e/0x6c0 [mlx5_core] [ 1877.174526] [<ffffffff8101a679>] ? sched_clock+0x9/0x10 [ 1877.180753] [<ffffffff810f717e>] handle_irq_event_percpu+0x3e/0x1e0 [ 1877.188014] [<ffffffff810f735d>] handle_irq_event+0x3d/0x60 [ 1877.194567] [<ffffffff810f9fe7>] handle_edge_irq+0x77/0x130 [ 1877.201129] [<ffffffff81014c3f>] handle_irq+0xbf/0x150 [ 1877.207244] [<ffffffff815ed78a>] ? atomic_notifier_call_chain+0x1a/0x20 [ 1877.214829] [<ffffffff815f434f>] do_IRQ+0x4f/0xf0 [ 1877.220498] [<ffffffff815e94ad>] common_interrupt+0x6d/0x6d [ 1877.227025] <EOI> [ 1877.228967] [<ffffffff814834e2>] ? cpuidle_enter_state+0x52/0xc0 [ 1877.236990] [<ffffffff81483615>] cpuidle_idle_call+0xc5/0x200 [ 1877.243676] [<ffffffff8101bc7e>] arch_cpu_idle+0xe/0x30 [ 1877.249831] [<ffffffff810b4725>] cpu_startup_entry+0xf5/0x290 [ 1877.256513] [<ffffffff815cfee1>] start_secondary+0x265/0x27b [ 1877.263111] Code: Bad RIP value. [ 1877.267296] RIP [< (null)>] (null) [ 1877.273264] RSP <ffff88046fd63df8> [ 1877.277531] CR2: 0000000000000000 Fixes: 19098df2da78 ("IB/mlx5: Refactor mlx5_ib_qp to accommodate other QP types") Signed-off-by: Majd Dibbiny <[email protected]> Reviewed-by: Yishai Hadas <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
2017-08-24IB/core: Avoid accessing non-allocated memory when inferring port typeNoa Osherovich3-5/+14
Commit 44c58487d51a ("IB/core: Define 'ib' and 'roce' rdma_ah_attr types") introduced the concept of type in ah_attr: * During ib_register_device, each port is checked for its type which is stored in ib_device's port_immutable array. * During uverbs' modify_qp, the type is inferred using the port number in ib_uverbs_qp_dest struct (address vector) by accessing the relevant port_immutable array and the type is passed on to providers. IB spec (version 1.3) enforces a valid port value only in Reset to Init. During Init to RTR, the address vector must be valid but port number is not mentioned as a field in the address vector, so its value is not validated, which leads to accesses to a non-allocated memory when inferring the port type. Save the real port number in ib_qp during modify to Init (when the comp_mask indicates that the port number is valid) and use this value to infer the port type. Avoid copying the address vector fields if the matching bit is not set in the attr_mask. Address vector can't be modified before the port, so no valid flow is affected. Fixes: 44c58487d51a ('IB/core: Define 'ib' and 'roce' rdma_ah_attr types') Signed-off-by: Noa Osherovich <[email protected]> Reviewed-by: Yishai Hadas <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
2017-08-24virtio_net: be drop monitor friendlyEric Dumazet1-1/+1
This change is needed to not fool drop monitor. (perf record ... -e skb:kfree_skb ) Packets were properly sent and are consumed after TX completion. Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller6-24/+30
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for your net tree, they are: 1) Fix use after free of struct proc_dir_entry in ipt_CLUSTERIP, patch from Sabrina Dubroca. 2) Fix spurious EINVAL errors from iptables over nft compatibility layer. 3) Reload pointer to ip header only if there is non-terminal verdict, ie. XT_CONTINUE, otherwise invalid memory access may happen, patch from Taehee Yoo. 4) Fix interaction between SYNPROXY and NAT, SYNPROXY adds sequence adjustment already, however from nf_nat_setup() assumes there's not. Patch from Xin Long. 5) Fix burst arithmetics in nft_limit as Joe Stringer mentioned during NFWS in Faro. Patch from Andy Zhou. ==================== Signed-off-by: David S. Miller <[email protected]>
2017-08-24drm/bridge/sii8620: Fix memory corruptionMaciej Purski1-2/+2
Function sii8620_mt_read_devcap_reg_recv() used to read array index from a wrong msg register, which caused writing out of array bounds. It led to writing on other fields of struct sii8620. Signed-off-by: Maciej Purski <[email protected]> Fixes: e9c6da270 ("drm/bridge/sii8620: add reading device capability registers") Signed-off-by: Andrzej Hajda <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-08-24cpuset: Fix incorrect memory_pressure control file mappingWaiman Long1-0/+1
The memory_pressure control file was incorrectly set up without a private value (0, by default). As a result, this control file was treated like memory_migrate on read. By adding back the FILE_MEMORY_PRESSURE private value, the correct memory pressure value will be returned. Signed-off-by: Waiman Long <[email protected]> Signed-off-by: Tejun Heo <[email protected]> Fixes: 7dbdb199d3bf ("cgroup: replace cftype->mode with CFTYPE_WORLD_WRITABLE") Cc: [email protected] # v4.4+
2017-08-24ASoC: rt5677: Reintroduce I2C device IDsTom Rini1-0/+1
Not all devices with ACPI and this combination of sound devices will have the required information provided via ACPI. Reintroduce the I2C device ID to restore sound functionality on on the Chromebook 'Samus' model. [ More background note: the commit a36afb0ab648 ("ASoC: rt5677: Introduce proper table...") moved the i2c ID probed via ACPI ("RT5677CE:00") to a proper acpi_device_id table. Although the action itself is correct per se, the overseen issue is the reference id->driver_data at rt5677_i2c_probe() for retrieving the corresponding chip model for the given id. Since id=NULL is passed for ACPI matching case, we get an Oops now. We already have queued more fixes for 4.14 and they already address the issue, but they are bigger changes that aren't preferable for the late 4.13-rc stage. So, this patch just papers over the bug as a once-off quick fix for a particular ACPI matching. -- tiwai ] Fixes: a36afb0ab648 ("ASoC: rt5677: Introduce proper table for ACPI enumeration") Signed-off-by: Tom Rini <[email protected]> Acked-by: Mark Brown <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2017-08-24Btrfs: fix blk_status_t/errno confusionOmar Sandoval5-60/+64
This fixes several instances of blk_status_t and bare errno ints being mixed up, some of which are real bugs. In the normal case, 0 matches BLK_STS_OK, so we don't observe any effects of the missing conversion, but in case of errors or passes through the repair/retry paths, the errors get mixed up. The changes were identified using 'sparse', we don't have reports of the buggy behaviour. Fixes: 4e4cbee93d56 ("block: switch bios to blk_status_t") Signed-off-by: Omar Sandoval <[email protected]> Reviewed-by: Liu Bo <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2017-08-25kbuild: update comments of Makefile.asm-genericCao jin1-2/+2
Signed-off-by: Cao jin <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2017-08-24netfilter: nf_tables: Fix nft limit burst handlingandy zhou1-11/+14
Current implementation treats the burst configuration the same as rate configuration. This can cause the per packet cost to be lower than configured. In effect, this bug causes the token bucket to be refilled at a higher rate than what user has specified. This patch changes the implementation so that the token bucket size is controlled by "rate + burst", while maintain the token bucket refill rate the same as user specified. Fixes: 96518518cc41 ("netfilter: add nftables") Signed-off-by: Andy Zhou <[email protected]> Acked-by: Joe Stringer <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2017-08-24bsg-lib: fix kernel panic resulting from missing allocation of reply-bufferBenjamin Block3-31/+46
Since we split the scsi_request out of struct request bsg fails to provide a reply-buffer for the drivers. This was done via the pointer for sense-data, that is not preallocated anymore. Failing to allocate/assign it results in illegal dereferences because LLDs use this pointer unquestioned. An example panic on s390x, using the zFCP driver, looks like this (I had debugging on, otherwise NULL-pointer dereferences wouldn't even panic on s390x): Unable to handle kernel pointer dereference in virtual kernel address space Failing address: 6b6b6b6b6b6b6000 TEID: 6b6b6b6b6b6b6403 Fault in home space mode while using kernel ASCE. AS:0000000001590007 R3:0000000000000024 Oops: 0038 ilc:2 [#1] PREEMPT SMP DEBUG_PAGEALLOC Modules linked in: <Long List> CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.12.0-bsg-regression+ #3 Hardware name: IBM 2964 N96 702 (z/VM 6.4.0) task: 0000000065cb0100 task.stack: 0000000065cb4000 Krnl PSW : 0704e00180000000 000003ff801e4156 (zfcp_fc_ct_els_job_handler+0x16/0x58 [zfcp]) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3 Krnl GPRS: 0000000000000001 000000005fa9d0d0 000000005fa9d078 0000000000e16866 000003ff00000290 6b6b6b6b6b6b6b6b 0000000059f78f00 000000000000000f 00000000593a0958 00000000593a0958 0000000060d88800 000000005ddd4c38 0000000058b50100 07000000659cba08 000003ff801e8556 00000000659cb9a8 Krnl Code: 000003ff801e4146: e31020500004 lg %r1,80(%r2) 000003ff801e414c: 58402040 l %r4,64(%r2) #000003ff801e4150: e35020200004 lg %r5,32(%r2) >000003ff801e4156: 50405004 st %r4,4(%r5) 000003ff801e415a: e54c50080000 mvhi 8(%r5),0 000003ff801e4160: e33010280012 lt %r3,40(%r1) 000003ff801e4166: a718fffb lhi %r1,-5 000003ff801e416a: 1803 lr %r0,%r3 Call Trace: ([<000003ff801e8556>] zfcp_fsf_req_complete+0x726/0x768 [zfcp]) [<000003ff801ea82a>] zfcp_fsf_reqid_check+0x102/0x180 [zfcp] [<000003ff801eb980>] zfcp_qdio_int_resp+0x230/0x278 [zfcp] [<00000000009b91b6>] qdio_kick_handler+0x2ae/0x2c8 [<00000000009b9e3e>] __tiqdio_inbound_processing+0x406/0xc10 [<00000000001684c2>] tasklet_action+0x15a/0x1d8 [<0000000000bd28ec>] __do_softirq+0x3ec/0x848 [<00000000001675a4>] irq_exit+0x74/0xf8 [<000000000010dd6a>] do_IRQ+0xba/0xf0 [<0000000000bd19e8>] io_int_handler+0x104/0x2d4 [<00000000001033b6>] enabled_wait+0xb6/0x188 ([<000000000010339e>] enabled_wait+0x9e/0x188) [<000000000010396a>] arch_cpu_idle+0x32/0x50 [<0000000000bd0112>] default_idle_call+0x52/0x68 [<00000000001cd0fa>] do_idle+0x102/0x188 [<00000000001cd41e>] cpu_startup_entry+0x3e/0x48 [<0000000000118c64>] smp_start_secondary+0x11c/0x130 [<0000000000bd2016>] restart_int_handler+0x62/0x78 [<0000000000000000>] (null) INFO: lockdep is turned off. Last Breaking-Event-Address: [<000003ff801e41d6>] zfcp_fc_ct_job_handler+0x3e/0x48 [zfcp] Kernel panic - not syncing: Fatal exception in interrupt This patch moves bsg-lib to allocate and setup struct bsg_job ahead of time, including the allocation of a buffer for the reply-data. This means, struct bsg_job is not allocated separately anymore, but as part of struct request allocation - similar to struct scsi_cmd. Reflect this in the function names that used to handle creation/destruction of struct bsg_job. Reported-by: Steffen Maier <[email protected]> Suggested-by: Christoph Hellwig <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Benjamin Block <[email protected]> Fixes: 82ed4db499b8 ("block: split scsi_request out of struct request") Cc: <[email protected]> #4.11+ Signed-off-by: Jens Axboe <[email protected]>
2017-08-24netfilter: check for seqadj ext existence before adding it in nf_nat_setup_infoXin Long1-1/+1
Commit 4440a2ab3b9f ("netfilter: synproxy: Check oom when adding synproxy and seqadj ct extensions") wanted to drop the packet when it fails to add seqadj ext due to no memory by checking if nfct_seqadj_ext_add returns NULL. But that nfct_seqadj_ext_add returns NULL can also happen when seqadj ext already exists in a nf_conn. It will cause that userspace protocol doesn't work when both dnat and snat are configured. Li Shuang found this issue in the case: Topo: ftp client router ftp server 10.167.131.2 <-> 10.167.131.254 10.167.141.254 <-> 10.167.141.1 Rules: # iptables -t nat -A PREROUTING -i eth1 -p tcp -m tcp --dport 21 -j \ DNAT --to-destination 10.167.141.1 # iptables -t nat -A POSTROUTING -o eth2 -p tcp -m tcp --dport 21 -j \ SNAT --to-source 10.167.141.254 In router, when both dnat and snat are added, nf_nat_setup_info will be called twice. The packet can be dropped at the 2nd time for DNAT due to seqadj ext is already added at the 1st time for SNAT. This patch is to fix it by checking for seqadj ext existence before adding it, so that the packet will not be dropped if seqadj ext already exists. Note that as Florian mentioned, as a long term, we should review ext_add() behaviour, it's better to return a pointer to the existing ext instead. Fixes: 4440a2ab3b9f ("netfilter: synproxy: Check oom when adding synproxy and seqadj ct extensions") Reported-by: Li Shuang <[email protected]> Acked-by: Florian Westphal <[email protected]> Signed-off-by: Xin Long <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2017-08-24tracing: Fix freeing of filter in create_filter() when set_str is falseSteven Rostedt (VMware)1-0/+4
Performing the following task with kmemleak enabled: # cd /sys/kernel/tracing/events/irq/irq_handler_entry/ # echo 'enable_event:kmem:kmalloc:3 if irq >' > trigger # echo 'enable_event:kmem:kmalloc:3 if irq > 31' > trigger # echo scan > /sys/kernel/debug/kmemleak # cat /sys/kernel/debug/kmemleak unreferenced object 0xffff8800b9290308 (size 32): comm "bash", pid 1114, jiffies 4294848451 (age 141.139s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81cef5aa>] kmemleak_alloc+0x4a/0xa0 [<ffffffff81357938>] kmem_cache_alloc_trace+0x158/0x290 [<ffffffff81261c09>] create_filter_start.constprop.28+0x99/0x940 [<ffffffff812639c9>] create_filter+0xa9/0x160 [<ffffffff81263bdc>] create_event_filter+0xc/0x10 [<ffffffff812655e5>] set_trigger_filter+0xe5/0x210 [<ffffffff812660c4>] event_enable_trigger_func+0x324/0x490 [<ffffffff812652e2>] event_trigger_write+0x1a2/0x260 [<ffffffff8138cf87>] __vfs_write+0xd7/0x380 [<ffffffff8138f421>] vfs_write+0x101/0x260 [<ffffffff8139187b>] SyS_write+0xab/0x130 [<ffffffff81cfd501>] entry_SYSCALL_64_fastpath+0x1f/0xbe [<ffffffffffffffff>] 0xffffffffffffffff The function create_filter() is passed a 'filterp' pointer that gets allocated, and if "set_str" is true, it is up to the caller to free it, even on error. The problem is that the pointer is not freed by create_filter() when set_str is false. This is a bug, and it is not up to the caller to free the filter on error if it doesn't care about the string. Link: http://lkml.kernel.org/r/[email protected] Cc: [email protected] Fixes: 38b78eb85 ("tracing: Factorize filter creation") Reported-by: Chunyu Hu <[email protected]> Tested-by: Chunyu Hu <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2017-08-24tracing: Fix kmemleak in tracing_map_array_free()Chunyu Hu1-4/+7
kmemleak reported the below leak when I was doing clear of the hist trigger. With this patch, the kmeamleak is gone. unreferenced object 0xffff94322b63d760 (size 32): comm "bash", pid 1522, jiffies 4403687962 (age 2442.311s) hex dump (first 32 bytes): 00 01 00 00 04 00 00 00 08 00 00 00 ff 00 00 00 ................ 10 00 00 00 00 00 00 00 80 a8 7a f2 31 94 ff ff ..........z.1... backtrace: [<ffffffff9e96c27a>] kmemleak_alloc+0x4a/0xa0 [<ffffffff9e424cba>] kmem_cache_alloc_trace+0xca/0x1d0 [<ffffffff9e377736>] tracing_map_array_alloc+0x26/0x140 [<ffffffff9e261be0>] kretprobe_trampoline+0x0/0x50 [<ffffffff9e38b935>] create_hist_data+0x535/0x750 [<ffffffff9e38bd47>] event_hist_trigger_func+0x1f7/0x420 [<ffffffff9e38893d>] event_trigger_write+0xfd/0x1a0 [<ffffffff9e44dfc7>] __vfs_write+0x37/0x170 [<ffffffff9e44f552>] vfs_write+0xb2/0x1b0 [<ffffffff9e450b85>] SyS_write+0x55/0xc0 [<ffffffff9e203857>] do_syscall_64+0x67/0x150 [<ffffffff9e977ce7>] return_from_SYSCALL_64+0x0/0x6a [<ffffffffffffffff>] 0xffffffffffffffff unreferenced object 0xffff9431f27aa880 (size 128): comm "bash", pid 1522, jiffies 4403687962 (age 2442.311s) hex dump (first 32 bytes): 00 00 8c 2a 32 94 ff ff 00 f0 8b 2a 32 94 ff ff ...*2......*2... 00 e0 8b 2a 32 94 ff ff 00 d0 8b 2a 32 94 ff ff ...*2......*2... backtrace: [<ffffffff9e96c27a>] kmemleak_alloc+0x4a/0xa0 [<ffffffff9e425348>] __kmalloc+0xe8/0x220 [<ffffffff9e3777c1>] tracing_map_array_alloc+0xb1/0x140 [<ffffffff9e261be0>] kretprobe_trampoline+0x0/0x50 [<ffffffff9e38b935>] create_hist_data+0x535/0x750 [<ffffffff9e38bd47>] event_hist_trigger_func+0x1f7/0x420 [<ffffffff9e38893d>] event_trigger_write+0xfd/0x1a0 [<ffffffff9e44dfc7>] __vfs_write+0x37/0x170 [<ffffffff9e44f552>] vfs_write+0xb2/0x1b0 [<ffffffff9e450b85>] SyS_write+0x55/0xc0 [<ffffffff9e203857>] do_syscall_64+0x67/0x150 [<ffffffff9e977ce7>] return_from_SYSCALL_64+0x0/0x6a [<ffffffffffffffff>] 0xffffffffffffffff Link: http://lkml.kernel.org/r/[email protected] Cc: [email protected] Fixes: 08d43a5fa063 ("tracing: Add lock-free tracing_map") Signed-off-by: Chunyu Hu <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2017-08-24ftrace: Check for null ret_stack on profile function graph entry functionSteven Rostedt (VMware)1-0/+4
There's a small race when function graph shutsdown and the calling of the registered function graph entry callback. The callback must not reference the task's ret_stack without first checking that it is not NULL. Note, when a ret_stack is allocated for a task, it stays allocated until the task exits. The problem here, is that function_graph is shutdown, and a new task was created, which doesn't have its ret_stack allocated. But since some of the functions are still being traced, the callbacks can still be called. The normal function_graph code handles this, but starting with commit 8861dd303c ("ftrace: Access ret_stack->subtime only in the function profiler") the profiler code references the ret_stack on function entry, but doesn't check if it is NULL first. Link: https://bugzilla.kernel.org/show_bug.cgi?id=196611 Cc: [email protected] Fixes: 8861dd303c ("ftrace: Access ret_stack->subtime only in the function profiler") Reported-by: [email protected] Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2017-08-24iwlwifi: pcie: move rx workqueue initialization to iwl_trans_pcie_alloc()Luca Coelho3-9/+12
Work queues cannot be allocated when a mutex is held because the mutex may be in use and that would make it sleep. Doing so generates the following splat with 4.13+: [ 19.513298] ====================================================== [ 19.513429] WARNING: possible circular locking dependency detected [ 19.513557] 4.13.0-rc5+ #6 Not tainted [ 19.513638] ------------------------------------------------------ [ 19.513767] cpuhp/0/12 is trying to acquire lock: [ 19.513867] (&tz->lock){+.+.+.}, at: [<ffffffff924afebb>] thermal_zone_get_temp+0x5b/0xb0 [ 19.514047] [ 19.514047] but task is already holding lock: [ 19.514166] (cpuhp_state){+.+.+.}, at: [<ffffffff91cc4baa>] cpuhp_thread_fun+0x3a/0x210 [ 19.514338] [ 19.514338] which lock already depends on the new lock. This lock dependency already existed with previous kernel versions, but it was not detected until commit 49dfe2a67797 ("cpuhotplug: Link lock stacks for hotplug callbacks") was introduced. Reported-by: David Weinehall <[email protected]> Reported-by: Jiri Kosina <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2017-08-24c6x: Convert to using %pOF instead of full_nameRob Herring3-17/+17
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <[email protected]> Cc: Mark Salter <[email protected]> Cc: Aurelien Jacquiot <[email protected]> Cc: [email protected] Signed-off-by: Mark Salter <[email protected]>
2017-08-24c6x: defconfig: Cleanup from old Kconfig optionsKrzysztof Kozlowski5-10/+0
Remove old, dead Kconfig options (in order appearing in this commit): - EXPERIMENTAL is gone since v3.9; - MISC_DEVICES: commit 7c5763b8453a ("drivers: misc: Remove MISC_DEVICES config option"); Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Mark Salter <[email protected]>
2017-08-24net: xfrm: don't double-hold dst when sk_policy in use.Lorenzo Colitti1-1/+0
While removing dst_entry garbage collection, commit 52df157f17e5 ("xfrm: take refcnt of dst when creating struct xfrm_dst bundle") changed xfrm_resolve_and_create_bundle so it returns an xdst with a refcount of 1 instead of 0. However, it did not delete the dst_hold performed by xfrm_lookup when a per-socket policy is in use. This means that when a socket policy is in use, dst entries returned by xfrm_lookup have a refcount of 2, and are not freed when no longer in use. Cc: Wei Wang <[email protected]> Fixes: 52df157f17 ("xfrm: take refcnt of dst when creating struct xfrm_dst bundle") Tested: https://android-review.googlesource.com/417481 Tested: https://android-review.googlesource.com/418659 Tested: https://android-review.googlesource.com/424463 Tested: https://android-review.googlesource.com/452776 passes on net-next Signed-off-by: Lorenzo Colitti <[email protected]> Acked-by: Wei Wang <[email protected]> Signed-off-by: Steffen Klassert <[email protected]>
2017-08-24KVM: PPC: Book3S HV: Add missing barriers to XIVE code and document themBenjamin Herrenschmidt1-2/+55
This adds missing memory barriers to order updates/tests of the virtual CPPR and MFRR, thus fixing a lost IPI problem. While at it also document all barriers in this file. This fixes a bug causing guest IPIs to occasionally get lost. The symptom then is hangs or stalls in the guest. Signed-off-by: Benjamin Herrenschmidt <[email protected]> Tested-by: Guilherme G. Piccoli <[email protected]> Signed-off-by: Paul Mackerras <[email protected]>
2017-08-24KVM: PPC: Book3S HV: Workaround POWER9 DD1.0 bug causing IPB bit lossBenjamin Herrenschmidt1-1/+10
This adds a workaround for a bug in POWER9 DD1 chips where changing the CPPR (Current Processor Priority Register) can cause bits in the IPB (Interrupt Pending Buffer) to get lost. Thankfully it only happens when manually manipulating CPPR which is quite rare. When it does happen it can cause interrupts to be delayed or lost. Signed-off-by: Benjamin Herrenschmidt <[email protected]> Signed-off-by: Paul Mackerras <[email protected]>
2017-08-24KVM: PPC: Book3S HV: Use msgsync with hypervisor doorbells on POWER9Nicholas Piggin1-0/+3
When msgsnd is used for IPIs to other cores, msgsync must be executed by the target to order stores performed on the source before its msgsnd (provided the source executes the appropriate sync). Fixes: 1704a81ccebc ("KVM: PPC: Book3S HV: Use msgsnd for IPIs to other cores on POWER9") Signed-off-by: Nicholas Piggin <[email protected]> Signed-off-by: Paul Mackerras <[email protected]>
2017-08-24timers: Fix excessive granularity of new timers after a nohz idleNicholas Piggin1-9/+41
When a timer base is idle, it is forwarded when a new timer is added to ensure that granularity does not become excessive. When not idle, the timer tick is expected to increment the base. However there are several problems: - If an existing timer is modified, the base is forwarded only after the index is calculated. - The base is not forwarded by add_timer_on. - There is a window after a timer is restarted from a nohz idle, after it is marked not-idle and before the timer tick on this CPU, where a timer may be added but the ancient base does not get forwarded. These result in excessive granularity (a 1 jiffy timeout can blow out to 100s of jiffies), which cause the rcu lockup detector to trigger, among other things. Fix this by keeping track of whether the timer base has been idle since it was last run or forwarded, and if so then forward it before adding a new timer. There is still a case where mod_timer optimises the case of a pending timer mod with the same expiry time, where the timer can see excessive granularity relative to the new, shorter interval. A comment is added, but it's not changed because it is an important fastpath for networking. This has been tested and found to fix the RCU softlockup messages. Testing was also done with tracing to measure requested versus achieved wakeup latencies for all non-deferrable timers in an idle system (with no lockup watchdogs running). Wakeup latency relative to absolute latency is calculated (note this suffers from round-up skew at low absolute times) and analysed: max avg std upstream 506.0 1.20 4.68 patched 2.0 1.08 0.15 The bug was noticed due to the lockup detector Kconfig changes dropping it out of people's .configs and resulting in larger base clk skew When the lockup detectors are enabled, no CPU can go idle for longer than 4 seconds, which limits the granularity errors. Sub-optimal timer behaviour is observable on a smaller scale in that case: max avg std upstream 9.0 1.05 0.19 patched 2.0 1.04 0.11 Fixes: Fixes: a683f390b93f ("timers: Forward the wheel clock whenever possible") Signed-off-by: Nicholas Piggin <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: Jonathan Cameron <[email protected]> Tested-by: David Miller <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: Stephen Boyd <[email protected]> Cc: [email protected] Cc: [email protected] Cc: John Stultz <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected]
2017-08-23Merge branch 'bnxt_en-bug-fixes'David S. Miller2-12/+31
Michael Chan says: ==================== bnxt_en: bug fixes. 3 bug fixes related to XDP ring accounting in bnxt_setup_tc(), freeing MSIX vectors when bnxt_re unregisters, and preserving the user-administered PF MAC address when disabling SRIOV. ==================== Signed-off-by: David S. Miller <[email protected]>
2017-08-23bnxt_en: Do not setup MAC address in bnxt_hwrm_func_qcaps().Michael Chan1-12/+28
bnxt_hwrm_func_qcaps() is called during probe to get all device resources and it also sets up the factory MAC address. The same function is called when SRIOV is disabled to reclaim all resources. If the MAC address has been overridden by a user administered MAC address, calling this function will overwrite it. Separate the logic that sets up the default MAC address into a new function bnxt_init_mac_addr() that is only called during probe time. Fixes: 4a21b49b34c0 ("bnxt_en: Improve VF resource accounting.") Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-23bnxt_en: Free MSIX vectors when unregistering the device from bnxt_re.Michael Chan1-0/+2
Take back ownership of the MSIX vectors when unregistering the device from bnxt_re. Fixes: a588e4580a7e ("bnxt_en: Add interface to support RDMA driver.") Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-23bnxt_en: Fix .ndo_setup_tc() to include XDP rings.Michael Chan1-0/+1
When the number of TX rings is changed in bnxt_setup_tc(), we need to include the XDP rings in the total TX ring count. Fixes: 38413406277f ("bnxt_en: Add support for XDP_TX action.") Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-23nfp: TX time stamp packets before HW doorbell is rungJakub Kicinski1-2/+2
TX completion may happen any time after HW queue was kicked. We can't access the skb afterwards. Move the time stamping before ringing the doorbell. Fixes: 4c3523623dc0 ("net: add driver for Netronome NFP4000/NFP6000 NIC VFs") Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-23sctp: Avoid out-of-bounds reads from address storageStefano Brivio2-4/+6
inet_diag_msg_sctp{,l}addr_fill() and sctp_get_sctp_info() copy sizeof(sockaddr_storage) bytes to fill in sockaddr structs used to export diagnostic information to userspace. However, the memory allocated to store sockaddr information is smaller than that and depends on the address family, so we leak up to 100 uninitialized bytes to userspace. Just use the size of the source structs instead, in all the three cases this is what userspace expects. Zero out the remaining memory. Unused bytes (i.e. when IPv4 addresses are used) in source structs sctp_sockaddr_entry and sctp_transport are already cleared by sctp_add_bind_addr() and sctp_transport_new(), respectively. Noticed while testing KASAN-enabled kernel with 'ss': [ 2326.885243] BUG: KASAN: slab-out-of-bounds in inet_sctp_diag_fill+0x42c/0x6c0 [sctp_diag] at addr ffff881be8779800 [ 2326.896800] Read of size 128 by task ss/9527 [ 2326.901564] CPU: 0 PID: 9527 Comm: ss Not tainted 4.11.0-22.el7a.x86_64 #1 [ 2326.909236] Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017 [ 2326.917585] Call Trace: [ 2326.920312] dump_stack+0x63/0x8d [ 2326.924014] kasan_object_err+0x21/0x70 [ 2326.928295] kasan_report+0x288/0x540 [ 2326.932380] ? inet_sctp_diag_fill+0x42c/0x6c0 [sctp_diag] [ 2326.938500] ? skb_put+0x8b/0xd0 [ 2326.942098] ? memset+0x31/0x40 [ 2326.945599] check_memory_region+0x13c/0x1a0 [ 2326.950362] memcpy+0x23/0x50 [ 2326.953669] inet_sctp_diag_fill+0x42c/0x6c0 [sctp_diag] [ 2326.959596] ? inet_diag_msg_sctpasoc_fill+0x460/0x460 [sctp_diag] [ 2326.966495] ? __lock_sock+0x102/0x150 [ 2326.970671] ? sock_def_wakeup+0x60/0x60 [ 2326.975048] ? remove_wait_queue+0xc0/0xc0 [ 2326.979619] sctp_diag_dump+0x44a/0x760 [sctp_diag] [ 2326.985063] ? sctp_ep_dump+0x280/0x280 [sctp_diag] [ 2326.990504] ? memset+0x31/0x40 [ 2326.994007] ? mutex_lock+0x12/0x40 [ 2326.997900] __inet_diag_dump+0x57/0xb0 [inet_diag] [ 2327.003340] ? __sys_sendmsg+0x150/0x150 [ 2327.007715] inet_diag_dump+0x4d/0x80 [inet_diag] [ 2327.012979] netlink_dump+0x1e6/0x490 [ 2327.017064] __netlink_dump_start+0x28e/0x2c0 [ 2327.021924] inet_diag_handler_cmd+0x189/0x1a0 [inet_diag] [ 2327.028045] ? inet_diag_rcv_msg_compat+0x1b0/0x1b0 [inet_diag] [ 2327.034651] ? inet_diag_dump_compat+0x190/0x190 [inet_diag] [ 2327.040965] ? __netlink_lookup+0x1b9/0x260 [ 2327.045631] sock_diag_rcv_msg+0x18b/0x1e0 [ 2327.050199] netlink_rcv_skb+0x14b/0x180 [ 2327.054574] ? sock_diag_bind+0x60/0x60 [ 2327.058850] sock_diag_rcv+0x28/0x40 [ 2327.062837] netlink_unicast+0x2e7/0x3b0 [ 2327.067212] ? netlink_attachskb+0x330/0x330 [ 2327.071975] ? kasan_check_write+0x14/0x20 [ 2327.076544] netlink_sendmsg+0x5be/0x730 [ 2327.080918] ? netlink_unicast+0x3b0/0x3b0 [ 2327.085486] ? kasan_check_write+0x14/0x20 [ 2327.090057] ? selinux_socket_sendmsg+0x24/0x30 [ 2327.095109] ? netlink_unicast+0x3b0/0x3b0 [ 2327.099678] sock_sendmsg+0x74/0x80 [ 2327.103567] ___sys_sendmsg+0x520/0x530 [ 2327.107844] ? __get_locked_pte+0x178/0x200 [ 2327.112510] ? copy_msghdr_from_user+0x270/0x270 [ 2327.117660] ? vm_insert_page+0x360/0x360 [ 2327.122133] ? vm_insert_pfn_prot+0xb4/0x150 [ 2327.126895] ? vm_insert_pfn+0x32/0x40 [ 2327.131077] ? vvar_fault+0x71/0xd0 [ 2327.134968] ? special_mapping_fault+0x69/0x110 [ 2327.140022] ? __do_fault+0x42/0x120 [ 2327.144008] ? __handle_mm_fault+0x1062/0x17a0 [ 2327.148965] ? __fget_light+0xa7/0xc0 [ 2327.153049] __sys_sendmsg+0xcb/0x150 [ 2327.157133] ? __sys_sendmsg+0xcb/0x150 [ 2327.161409] ? SyS_shutdown+0x140/0x140 [ 2327.165688] ? exit_to_usermode_loop+0xd0/0xd0 [ 2327.170646] ? __do_page_fault+0x55d/0x620 [ 2327.175216] ? __sys_sendmsg+0x150/0x150 [ 2327.179591] SyS_sendmsg+0x12/0x20 [ 2327.183384] do_syscall_64+0xe3/0x230 [ 2327.187471] entry_SYSCALL64_slow_path+0x25/0x25 [ 2327.192622] RIP: 0033:0x7f41d18fa3b0 [ 2327.196608] RSP: 002b:00007ffc3b731218 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 2327.205055] RAX: ffffffffffffffda RBX: 00007ffc3b731380 RCX: 00007f41d18fa3b0 [ 2327.213017] RDX: 0000000000000000 RSI: 00007ffc3b731340 RDI: 0000000000000003 [ 2327.220978] RBP: 0000000000000002 R08: 0000000000000004 R09: 0000000000000040 [ 2327.228939] R10: 00007ffc3b730f30 R11: 0000000000000246 R12: 0000000000000003 [ 2327.236901] R13: 00007ffc3b731340 R14: 00007ffc3b7313d0 R15: 0000000000000084 [ 2327.244865] Object at ffff881be87797e0, in cache kmalloc-64 size: 64 [ 2327.251953] Allocated: [ 2327.254581] PID = 9484 [ 2327.257215] save_stack_trace+0x1b/0x20 [ 2327.261485] save_stack+0x46/0xd0 [ 2327.265179] kasan_kmalloc+0xad/0xe0 [ 2327.269165] kmem_cache_alloc_trace+0xe6/0x1d0 [ 2327.274138] sctp_add_bind_addr+0x58/0x180 [sctp] [ 2327.279400] sctp_do_bind+0x208/0x310 [sctp] [ 2327.284176] sctp_bind+0x61/0xa0 [sctp] [ 2327.288455] inet_bind+0x5f/0x3a0 [ 2327.292151] SYSC_bind+0x1a4/0x1e0 [ 2327.295944] SyS_bind+0xe/0x10 [ 2327.299349] do_syscall_64+0xe3/0x230 [ 2327.303433] return_from_SYSCALL_64+0x0/0x6a [ 2327.308194] Freed: [ 2327.310434] PID = 4131 [ 2327.313065] save_stack_trace+0x1b/0x20 [ 2327.317344] save_stack+0x46/0xd0 [ 2327.321040] kasan_slab_free+0x73/0xc0 [ 2327.325220] kfree+0x96/0x1a0 [ 2327.328530] dynamic_kobj_release+0x15/0x40 [ 2327.333195] kobject_release+0x99/0x1e0 [ 2327.337472] kobject_put+0x38/0x70 [ 2327.341266] free_notes_attrs+0x66/0x80 [ 2327.345545] mod_sysfs_teardown+0x1a5/0x270 [ 2327.350211] free_module+0x20/0x2a0 [ 2327.354099] SyS_delete_module+0x2cb/0x2f0 [ 2327.358667] do_syscall_64+0xe3/0x230 [ 2327.362750] return_from_SYSCALL_64+0x0/0x6a [ 2327.367510] Memory state around the buggy address: [ 2327.372855] ffff881be8779700: fc fc fc fc 00 00 00 00 00 00 00 00 fc fc fc fc [ 2327.380914] ffff881be8779780: fb fb fb fb fb fb fb fb fc fc fc fc 00 00 00 00 [ 2327.388972] >ffff881be8779800: 00 00 00 00 fc fc fc fc fb fb fb fb fb fb fb fb [ 2327.397031] ^ [ 2327.401792] ffff881be8779880: fc fc fc fc fb fb fb fb fb fb fb fb fc fc fc fc [ 2327.409850] ffff881be8779900: 00 00 00 00 00 04 fc fc fc fc fc fc 00 00 00 00 [ 2327.417907] ================================================================== This fixes CVE-2017-7558. References: https://bugzilla.redhat.com/show_bug.cgi?id=1480266 Fixes: 8f840e47f190 ("sctp: add the sctp_diag.c file") Cc: Xin Long <[email protected]> Cc: Vlad Yasevich <[email protected]> Cc: Neil Horman <[email protected]> Signed-off-by: Stefano Brivio <[email protected]> Acked-by: Marcelo Ricardo Leitner <[email protected]> Reviewed-by: Xin Long <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-23net: dsa: use consume_skb()Eric Dumazet2-2/+2
Two kfree_skb() should be consume_skb(), to be friend with drop monitor (perf record ... -e skb:kfree_skb) Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.