aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-07-19media: ti-vpe: cal: Inline CAL_VERSION macro in its only userLaurent Pinchart1-3/+1
The CAL_VERSION macro is used once only, in MODULE_VERSION(). This doesn't improve readability, inline it. Signed-off-by: Laurent Pinchart <[email protected]> Reviewed-by: Tomi Valkeinen <[email protected]> Reviewed-by: Benoit Parrot <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-07-19media: ti-vpe: cal: Merge all status variables in IRQ handlerLaurent Pinchart1-14/+14
The cal_irq() function reads three IRQ status registers and stores their values in three different variables. As each value is processed right after reading the corresponding register, a single variable is enough. Signed-off-by: Laurent Pinchart <[email protected]> Reviewed-by: Tomi Valkeinen <[email protected]> Reviewed-by: Benoit Parrot <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-07-19media: ti-vpe: cal: Index IRQ registersstarting at 0Laurent Pinchart2-23/+23
The datasheet numbers the IRQ registers starting from 0. Update the numbering scheme to match the datasheet. Signed-off-by: Laurent Pinchart <[email protected]> Reviewed-by: Tomi Valkeinen <[email protected]> Reviewed-by: Benoit Parrot <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-07-19media: ti-vpe: cal: Index CSI-2 port starting at 0Laurent Pinchart2-47/+47
The datasheet numbers the CSI-2 PHYs (external to the CAL) starting from 1, but the PPI inputs to the CAL starting from 0. Update the numbering scheme for csi2_port to match the datasheet, which also simplifies the driver by removing the need to constantly subtract 1 from the value. Signed-off-by: Laurent Pinchart <[email protected]> Reviewed-by: Tomi Valkeinen <[email protected]> Reviewed-by: Benoit Parrot <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-07-19media: ti-vpe: cal: Decouple CSI2 port and CPORTLaurent Pinchart1-3/+5
The CPORT mentioned in the CAL documentation has nothing to do with the CSI-2 ports. It's a remnant of CSI-3 support (or an attempt to achieve it), and now only serves as an arbitraty tag value used to associate data samples with contexts. Add a cport field to the cal_ctx structure and use it instead of the CSI-2 port number where a CPORT is required by the hardware. The value of the cport field is currently the same as the csi2_port field, so there's no functional change, but this will help reworking CPORT and CSI-2 port handling separately. Signed-off-by: Laurent Pinchart <[email protected]> Reviewed-by: Tomi Valkeinen <[email protected]> Reviewed-by: Benoit Parrot <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-07-19media: ti-vpe: cal: Avoid function forward declarationLaurent Pinchart1-56/+55
Move the cal_complete_ctx() function earlier in the file to avoid a foward declaration. There is no functional change. Signed-off-by: Laurent Pinchart <[email protected]> Reviewed-by: Tomi Valkeinen <[email protected]> Reviewed-by: Benoit Parrot <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-07-19media: ti-vpe: cal: Sort headers alphabeticallyLaurent Pinchart1-7/+8
Sorting headers alphabetically helps locating duplicates. Signed-off-by: Laurent Pinchart <[email protected]> Reviewed-by: Tomi Valkeinen <[email protected]> Reviewed-by: Benoit Parrot <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-07-19gspca: First camera mode is skippedFlorin Tudorache1-1/+1
If a device supports a resolution in 2 different formats, mode[0] is skipped on first iteration and a different format is selected. Example: 320x240/YUYV isn't reachable for OV534/ov772x Signed-off-by: Florin Tudorache <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-07-19media: s5p-g2d: Fix a memory leak in an error handling path in 'g2d_probe()'Christophe JAILLET1-13/+15
Memory allocated with 'v4l2_m2m_init()' must be freed by a corresponding call to 'v4l2_m2m_release()' Also reorder the code at the end of the probe function so that 'video_register_device()' is called last. Update the error handling path accordingly. Fixes: 5ce60d790a24 ("[media] s5p-g2d: Add DT based discovery support") Fixes: 918847341af0 ("[media] v4l: add G2D driver for s5p device family") Signed-off-by: Christophe JAILLET <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> [[email protected]: checkpatch: align with parenthesis] Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-07-19media: Add V4L2_TYPE_IS_CAPTURE helperEzequiel Garcia13-20/+21
It's all too easy to get confused by the V4L2_TYPE_IS_OUTPUT macro, when it's used as !V4L2_TYPE_IS_OUTPUT. Reduce the risk of confusion with macro to explicitly check for the CAPTURE queue type case. This change does not affect functionality, and it's only intended to make the code more readable. Suggested-by: Nicolas Dufresne <[email protected]> Signed-off-by: Ezequiel Garcia <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> [[email protected]: checkpatch: align with parenthesis] Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-07-19media: pci: dt3155: fix spelling mistakeFlavio Suligoi2-2/+2
Fix typo: "TRIGER" --> "TRIGGER" Signed-off-by: Flavio Suligoi <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-07-19media: docs: pvrusb2: replace http references with https onesAlexander A. Klimov1-1/+1
PVRUSB2 VIDEO4LINUX DRIVER: Replace HTTP links with HTTPS ones Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-07-19media: gspca: replace http references with https onesAlexander A. Klimov1-1/+1
GSPCA USB WEBCAM DRIVER: Replace HTTP links with HTTPS ones Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-07-19media: atmel: atmel-isc: rework component offsetsEugen Hristev3-39/+25
The component offsets were computed in a negative way: they were subtracted from the actual color component value. So, a higher offset was reducing the component value. This is not really desirable, as the offset is a 2's complements number with 1 bit for sign and 12 value bits, so we would like to be able to also add to the component, not only subtract. The reported number in v4l2 is fine, a range from -4095 to +4095. However when configuring a negative value for the offset, this would in fact not function, because with the old code, the number was subtracted from the max value. By setting something negative, it was overflowing in fact. Reworked the component offsets by placing the real value as the v4l2 ctrls. Now, the values are the real number that is added or subtracted from the component. The negative values received from v4l2 are already in 2's complements, so there is no need for conversion. This actually simplifies a lot the computation procedure, eliminating the need for the macros that convert from v4l2 values to ISC values and viceversa. Also the ZERO_VAL is eliminated, as 0 is now 0, as it's supposed to be. Example after this change: # v4l2-ctl --set-ctrl=red_component_offset=-150 -L User Controls brightness 0x00980900 (int) : min=-1024 max=1023 step=1 default=0 value=0 flags=slider contrast 0x00980901 (int) : min=-2048 max=2047 step=1 default=16 value=20 flags=slider white_balance_automatic 0x0098090c (bool) : default=1 value=0 flags=update do_white_balance 0x0098090d (button) : flags=inactive, write-only, execute-on-write gamma 0x00980910 (int) : min=0 max=3 step=1 default=3 value=3 flags=slider red_component_gain 0x009819c0 (int) : min=0 max=8191 step=1 default=512 value=512 flags=slider blue_component_gain 0x009819c1 (int) : min=0 max=8191 step=1 default=512 value=512 flags=slider green_red_component_gain 0x009819c2 (int) : min=0 max=8191 step=1 default=512 value=512 flags=slider green_blue_component_gain 0x009819c3 (int) : min=0 max=8191 step=1 default=512 value=512 flags=slider red_component_offset 0x009819c4 (int) : min=-4095 max=4095 step=1 default=0 value=-150 flags=slider blue_component_offset 0x009819c5 (int) : min=-4095 max=4095 step=1 default=0 value=0 flags=slider green_red_component_offset 0x009819c6 (int) : min=-4095 max=4095 step=1 default=0 value=0 flags=slider green_blue_component_offset 0x009819c7 (int) : min=-4095 max=4095 step=1 default=0 value=0 flags=slider The auto white balance algorithm is unchanged, but the obtained value to 'subtract' is now converted to negative and saved as a v4l2 control and displayed properly. Signed-off-by: Eugen Hristev <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-07-19media: davinci: replace http references with httpsAlexander A. Klimov6-6/+6
TI DAVINCI SERIES MEDIA DRIVER: Replace HTTP links with HTTPS ones Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <[email protected]> Reviewed-by: Kieran Bingham <[email protected]> Reviewed-by: Lad Prabhakar <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-07-19media: solo6x10: replace http references with httpsAlexander A. Klimov16-16/+16
Replace HTTP links with HTTPS ones: SOFTLOGIC 6x10 MPEG CODEC Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <[email protected]> Signed-off-by: Ismael Luceno <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-07-19Documentation: userspace-api/media: drop doubled wordsRandy Dunlap6-9/+8
Drop duplicated words in Documentation/userspace-api/media/. This addresses the words "struct" and "value". Signed-off-by: Randy Dunlap <[email protected]> Cc: Jonathan Corbet <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> [[email protected]: dev-sdr.rst: there is two -> there are two] Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-07-19sun4i-csi: call _vb2_fop_release instead of v4l2_fh_releaseHans Verkuil1-1/+2
This driver didn't call _vb2_fop_release in the sun4i_csi_release function. Without that call the vb2 queue is not properly canceled and buffers may not be freed. Signed-off-by: Hans Verkuil <[email protected]> Acked-by: Maxime Ripard <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-07-19sun4i-csi: drop read/write, enable VB2_DMABUFHans Verkuil2-3/+1
For no obvious reason VB2_DMABUF was not enabled. Add this. Also both read and write file ops were set, but this was not enabled in the vb2 io_modes or in the device_caps capabilities. Drop this. Signed-off-by: Hans Verkuil <[email protected]> Acked-by: Maxime Ripard <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-07-19sunxi-csi: fill in bus_info of media deviceHans Verkuil2-0/+4
This fixes a v4l2-compliance warning: Required ioctls: warn: v4l2-test-media.cpp(52): empty bus_info test MEDIA_IOC_DEVICE_INFO: OK Signed-off-by: Hans Verkuil <[email protected]> Acked-by: Maxime Ripard <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-07-19media: gspca: remove redundant initialization of variable statusColin Ian King1-1/+1
The variable status is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-07-19v4l2-core: Print control name in VIDIOC_S/G_(EXT)_CTRL(S)Ezequiel Garcia1-4/+10
While debugging, it's currently really hard to identify controls by their ID. Print the control name making the print more helpful. With this change, the print changes from: video1: VIDIOC_S_EXT_CTRLS: which=0xf010000, count=5, error_idx=4, request_fd=45, id/size=0x990ce8/1048, id/size=0x990ce9/12, id/size=0x990cea/480, id/size=0x990ceb/896, id/size=0x990cec/400 video1: VIDIOC_S_EXT_CTRLS: which=0xf010000, count=5, error_idx=4, request_fd=42, name=H264 Sequence Parameter Set, id/size=0x990ce8/1048, name=H264 Picture Parameter Set, id/size=0x990ce9/12, name=H264 Scaling Matrix, id/size=0x990cea/480, name=H264 Slice Parameters, id/size=0x990ceb/896, name=H264 Decode Parameters, id/size=0x990cec/400 For instance, this is specially helpful when the ioctl fails. Consider the following example: v4l2-ctrls: prepare_ext_ctrls: video1: pointer control id 0x990cec size too small, 400 bytes but 784 bytes needed v4l2-ctrls: try_set_ext_ctrls: video1: video1: try_set_ext_ctrls_common failed (-14) video1: VIDIOC_S_EXT_CTRLS: error -14: which=0xf010000, count=5, error_idx=5, request_fd=39, name=H264 Sequence Parameter Set, id/size=0x990ce8/1048, name=H264 Picture Parameter Set, id/size=0x990ce9/12, name=H264 Scaling Matrix, id/size=0x990cea/480, name=H264 Slice Parameters, id/size=0x990ceb/896, name=H264 Decode Parameters, id/size=0x990cec/400 Signed-off-by: Ezequiel Garcia <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-07-19include/media/v4l2-subdev.h: fix typoHans Verkuil1-1/+1
Typo in comment block: v4l2_subdev_get_try_crop -> v4l2_subdev_get_try_compose Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-07-19cec-api: prevent leaking memory through hole in structureHans Verkuil1-1/+7
Fix this smatch warning: drivers/media/cec/core/cec-api.c:156 cec_adap_g_log_addrs() warn: check that 'log_addrs' doesn't leak information (struct has a hole after 'features') Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-07-19go7007: add sanity checking for endpointsOliver Neukum1-1/+10
A malicious USB device may lack endpoints the driver assumes to exist Accessing them leads to NULL pointer accesses. This patch introduces sanity checking. Reported-and-tested-by: [email protected] Signed-off-by: Oliver Neukum <[email protected]> Fixes: 866b8695d67e8 ("Staging: add the go7007 video driver") Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-07-19media: staging: tegra-vde: Power-cycle hardware on probeDmitry Osipenko1-0/+8
VDE partition is left turned ON after bootloader on most devices, hence let's ensure that it's turned OFF in order to lower power leakage while hardware is idling by turning it ON and OFF during of the driver's probe. Signed-off-by: Dmitry Osipenko <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-07-19media: staging: tegra-vde: Turn ON power domain on shutdownDmitry Osipenko1-0/+19
On some devices bootloader isn't ready to a clamped VDE power, and thus, machine hangs on a warm reboot (CPU reset). The VDE power partition is turned ON by default on a cold boot, hence VDE driver should keep power partition enabled on system's reboot too. This fixes hang on a warm reboot on a Tegra20 Acer A500 device, which is handy if Embedded Controller driver is unavailable, i.e. cold reboot can't be performed. Signed-off-by: Dmitry Osipenko <[email protected]> Acked-by: Thierry Reding <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-07-19media: staging: tegra-vde: Runtime PM is always available on TegraDmitry Osipenko1-16/+0
Runtime PM is always available on Tegra nowadays since commit 40b2bb1b132a ("ARM: tegra: enforce PM requirement"), hence the case of unavailable RPM doesn't need to be handled. Signed-off-by: Dmitry Osipenko <[email protected]> Acked-by: Thierry Reding <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-07-04media: cros-ec-cec: do not bail on device_init_wakeup failureDariusz Marcinkiewicz1-5/+1
Do not fail probing when device_init_wakeup fails. device_init_wakeup fails when the device is already enabled as wakeup device. Hence, the driver fails to probe the device if: - The device has already been enabled for wakeup (by e.g. sysfs) - The driver has been unloaded and is being loaded again. This goal of the patch is to fix the above cases. Overwhelming majority of the drivers do not check device_init_wakeup return code. Fixes: cd70de2d356ee ("media: platform: Add ChromeOS EC CEC driver") Signed-off-by: Dariusz Marcinkiewicz <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-07-04media: rockchip: rga: Only set output CSC mode for RGB inputPaul Kocialkowski1-1/+7
Setting the output CSC mode is required for a YUV output, but must not be set when the input is also YUV. Doing this (as tested with a YUV420P to YUV420P conversion) results in wrong colors. Adapt the logic to only set the output CSC mode when the output is YUV and the input is RGB. Also add a comment to clarify the rationale. Fixes: f7e7b48e6d79 ("[media] rockchip/rga: v4l2 m2m support") Signed-off-by: Paul Kocialkowski <[email protected]> Reviewed-by: Ezequiel Garcia <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-07-04media: rockchip: rga: Introduce color fmt macros and refactor CSC mode logicPaul Kocialkowski2-13/+15
This introduces two macros: RGA_COLOR_FMT_IS_YUV and RGA_COLOR_FMT_IS_RGB which allow quick checking of the colorspace familily of a RGA color format. These macros are then used to refactor the logic for CSC mode selection. The two nested tests for input colorspace are simplified into a single one, with a logical and, making the whole more readable. Signed-off-by: Paul Kocialkowski <[email protected]> Reviewed-by: Ezequiel Garcia <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-07-04media: exynos4-is: Add missed check for pinctrl_lookup_state()Chuhong Yuan1-0/+3
fimc_md_get_pinctrl() misses a check for pinctrl_lookup_state(). Add the missed check to fix it. Fixes: 4163851f7b99 ("[media] s5p-fimc: Use pinctrl API for camera ports configuration]") Signed-off-by: Chuhong Yuan <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-07-04media: staging: rkisp1: set more precise size errors in debugfsDafna Hirschfeld3-4/+16
When a size error is signaled, it is possible to read a register to see where the error comes from. So, in debugfs the general error 'pic_size_err' can be replaced with 3 more precise errors. Signed-off-by: Dafna Hirschfeld <[email protected]> Acked-by: Helen Koike <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-07-04media: tvp5150: Add missed media_entity_cleanup()Chuhong Yuan1-2/+6
This driver does not call media_entity_cleanup() in the error handler of tvp5150_registered() and tvp5150_remove(), while it has called media_entity_pads_init() at first. Add the missed calls to fix it. Fixes: 0556f1d580d4 ("media: tvp5150: add input source selection of_graph support") Signed-off-by: Chuhong Yuan <[email protected]> Reviewed-by: Marco Felsch <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-07-04media: pxa_camera: remove an impossible conditionDan Carpenter1-11/+8
It's not possible for "pcdev->mclk" to be zero because we check for that earlier and set it to 20000000 in that situation. If it were possible, that would be a problem because it could have lead to an Oops in the error handling when we call v4l2_clk_unregister(pcdev->mclk_clk); Signed-off-by: Dan Carpenter <[email protected]> Acked-by: Robert Jarzmik <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-07-04media: rcar-csi2: Rename confirm_start() to phy_post_init() to match its usageNiklas Söderlund1-7/+7
Since the driver was picked-up the starting of the PHY have changed quiet a bit. An artifact of these changes is the now poorly named callback confirm_start(). It used to confirm start of the PHY but now performs post PHY start initialization, rename it to phy_post_init() to reflect this. Signed-off-by: Niklas Söderlund <[email protected]> Acked-by: Jacopo Mondi <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-07-04media: docs: dev-decoder: Add one more reason for dynamic changeStanimir Varbanov1-1/+3
Add bit-depth change as one more reason which could change in the middle of the stream. For the worst case the stream is 8bit at the beginning but later in the bit-stream it changes to 10bit. That change should be propagated to the client so that it can take the appropriate action. In that case it has to stop the streaming on the capture queue, re-negotiate the pixel format, allocate new buffers and start the streaming again. Signed-off-by: Stanimir Varbanov <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-07-04media: test_drivers: vivid-core: Use array_size() helperGustavo A. R. Silva1-2/+2
The tpg_alloc() and vmalloc() functions have no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This issue was found with the help of Coccinelle and, audited and fixed manually. Addresses-KSPP-ID: https://github.com/KSPP/linux/issues/83 Signed-off-by: Gustavo A. R. Silva <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-07-04media: videobuf2: Fix length check for single plane dmabuf queueingJohn Cox1-1/+2
Check against length in v4l2_buffer rather than vb2_buffer when the buffer is a dmabuf. This makes the single plane test the same as the existing multiplanar test. Signed-off-by: John Cox <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-07-04media: staging: rkisp1: rsz: fix resolution limitation on sink padHelen Koike1-4/+4
Resizer sink pad is limited by what the ISP can generate. The configurations describes what the resizer can produce. This was tested on a Scarlet device with ChromiumOs, where the selfpath receives 2592x1944 and produces 1600x1200 (which isn't possible without this fix). Fixes: 56e3b29f9f6b2 ("media: staging: rkisp1: add streaming paths") Signed-off-by: Helen Koike <[email protected]> Reviewed-by: Tomasz Figa <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-07-04media: samsung: Rename Samsung and Exynos to lowercaseKrzysztof Kozlowski4-6/+6
Fix up inconsistent usage of upper and lowercase letters in "Samsung" and "Exynos" names. "SAMSUNG" and "EXYNOS" are not abbreviations but regular trademarked names. Therefore they should be written with lowercase letters starting with capital letter. The lowercase "Exynos" name is promoted by its manufacturer Samsung Electronics Co., Ltd., in advertisement materials and on website. Although advertisement materials usually use uppercase "SAMSUNG", the lowercase version is used in all legal aspects (e.g. on Wikipedia and in privacy/legal statements on https://www.samsung.com/semiconductor/privacy-global/). Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-07-04media: staging: rkisp1: rsz: set default format if the given format is not ↵Dafna Hirschfeld3-4/+4
RKISP1_ISP_SD_SRC When setting the sink format of the 'rkisp1_resizer' the format should be supported by 'rkisp1_isp' on the video source pad. This patch checks this condition and sets the format to default if the condition is false. Fixes: 56e3b29f9f6b "media: staging: rkisp1: add streaming paths" Signed-off-by: Dafna Hirschfeld <[email protected]> Reviewed-by: Tomasz Figa <[email protected]> Acked-by: Helen Koike <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-07-04media: staging: rkisp1: rename macros 'RKISP1_DIR_*' to 'RKISP1_ISP_SD_*'Dafna Hirschfeld1-23/+23
The macros 'RKISP1_DIR_*' are flags that indicate on which pads of the isp subdevice the media bus code is supported. So the prefix RKISP1_ISP_SD_ is better. Signed-off-by: Dafna Hirschfeld <[email protected]> Acked-by: Helen Koike <[email protected]> Reviewed-by: Tomasz Figa <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-07-04media: staging: rkisp1: remove macro RKISP1_DIR_SINK_SRCDafna Hirschfeld1-13/+12
The macro RKISP1_DIR_SINK_SRC is a mask of two flags. The macro hides the fact that it's a mask and the code is actually more clear if we replace it the with bitwise-or explicitly. Signed-off-by: Dafna Hirschfeld <[email protected]> Acked-by: Helen Koike <[email protected]> Reviewed-by: Tomasz Figa <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-07-04media: staging: rkisp1: rsz: supported formats are the isp's src formats, ↵Dafna Hirschfeld1-2/+2
not sink formats The rkisp1_resizer's enum callback 'rkisp1_rsz_enum_mbus_code' calls the enum callback of the 'rkisp1_isp' on it's video sink pad. This is a bug, the resizer should support the same formats supported by the 'rkisp1_isp' on the source pad (not the sink pad). Fixes: 56e3b29f9f6b "media: staging: rkisp1: add streaming paths" Signed-off-by: Dafna Hirschfeld <[email protected]> Acked-by: Helen Koike <[email protected]> Reviewed-by: Tomasz Figa <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-07-04media: allegro: Fix some NULL vs IS_ERR() checks in probeDan Carpenter1-4/+4
The devm_ioremap() function doesn't return error pointers, it returns NULL on error. Fixes: f20387dfd065 ("media: allegro: add Allegro DVT video IP core driver") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-07-04media: vb2: Print the queue pointer in debug messagesLaurent Pinchart4-137/+174
When debugging issues that involve more than one video queue, messages related to multiple queues get interleaved without any easy way to tell which queue they relate to. Fix this by adding a queue name to vb2_queue, and printing it in all debug messages in the vb2 core and V4L2 layers. If the name isn't set by drivers, it is automatically filled with the queue direction and address. Signed-off-by: Laurent Pinchart <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-07-04media: use v4l2_rect_enclosed helperBenoit Parrot4-60/+11
Several drivers implement the same enclosed_rectangle() function to check if a rectangle is enclosed into another. Replace this with the newly added v4l2_rect_enclosed() helper function. Signed-off-by: Benoit Parrot <[email protected]> Acked-by: Andrzej Pietrasiewicz <[email protected]> Reviewed-by: Lad Prabhakar <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-07-04media: v4l2-rect.h: add enclosed rectangle helperBenoit Parrot1-0/+20
Add a helper function to check if one rectangle is enclosed inside another. Signed-off-by: Benoit Parrot <[email protected]> Acked-by: Andrzej Pietrasiewicz <[email protected]> Reviewed-by: Lad Prabhakar <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-07-04media: rcar-csi2: Add support for MEDIA_BUS_FMT_SRGGB8_1X8 formatLad Prabhakar1-0/+1
This patch adds support for MEDIA_BUS_FMT_SRGGB8_1X8 format for CSI2 input. Signed-off-by: Lad Prabhakar <[email protected]> Reviewed-by: Niklas Söderlund <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.