aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-02-23net/mlx5: Fix possible deadlock on rule deletionMaor Gottlieb1-0/+2
Add missing call to up_write_ref_node() which releases the semaphore in case the FTE doesn't have destinations, such in drop rule case. Fixes: 465e7baab6d9 ("net/mlx5: Fix deletion of duplicate rules") Signed-off-by: Maor Gottlieb <[email protected]> Reviewed-by: Mark Bloch <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-02-23net/mlx5: Fix tc max supported prio for nic modeChris Mi1-0/+3
Only prio 1 is supported if firmware doesn't support ignore flow level for nic mode. The offending commit removed the check wrongly. Add it back. Fixes: 9a99c8f1253a ("net/mlx5e: E-Switch, Offload all chain 0 priorities when modify header and forward action is not supported") Signed-off-by: Chris Mi <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-02-23net/mlx5: Fix wrong limitation of metadata match on ecpfAriel Levkovich1-4/+0
Match metadata support check returns false for ecpf device. However, this support does exist for ecpf and therefore this limitation should be removed to allow feature such as stacked devices and internal port offloaded to be supported. Fixes: 92ab1eb392c6 ("net/mlx5: E-Switch, Enable vport metadata matching if firmware supports it") Signed-off-by: Ariel Levkovich <[email protected]> Reviewed-by: Maor Dickman <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-02-23net/mlx5: Update log_max_qp value to be 17 at mostMaher Sanalla1-1/+1
Currently, log_max_qp value is dependent on what FW reports as its max capability. In reality, due to a bug, some FWs report a value greater than 17, even though they don't support log_max_qp > 17. This FW issue led the driver to exhaust memory on startup. Thus, log_max_qp value is set to be no more than 17 regardless of what FW reports, as it was before the cited commit. Fixes: f79a609ea6bf ("net/mlx5: Update log_max_qp value to FW max capability") Signed-off-by: Maher Sanalla <[email protected]> Reviewed-by: Avihai Horon <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-02-23net/mlx5: DR, Fix the threshold that defines when pool sync is initiatedYevgeny Kliteynik1-4/+7
When deciding whether to start syncing and actually free all the "hot" ICM chunks, we need to consider the type of the ICM chunks that we're dealing with. For instance, the amount of available ICM for MODIFY_ACTION is significantly lower than the usual STE ICM, so the threshold should account for that - otherwise we can deplete MODIFY_ACTION memory just by creating and deleting the same modify header action in a continuous loop. This patch replaces the hard-coded threshold with a dynamic value. Fixes: 1c58651412bb ("net/mlx5: DR, ICM memory pools sync optimization") Signed-off-by: Yevgeny Kliteynik <[email protected]> Reviewed-by: Alex Vesker <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-02-23net/mlx5: DR, Don't allow match on IP w/o matching on full ethertype/ip_versionYevgeny Kliteynik3-17/+45
Currently SMFS allows adding rule with matching on src/dst IP w/o matching on full ethertype or ip_version, which is not supported by HW. This patch fixes this issue and adds the check as it is done in DMFS. Fixes: 26d688e33f88 ("net/mlx5: DR, Add Steering entry (STE) utilities") Signed-off-by: Yevgeny Kliteynik <[email protected]> Reviewed-by: Alex Vesker <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-02-23net/mlx5: DR, Fix slab-out-of-bounds in mlx5_cmd_dr_create_fteYevgeny Kliteynik1-7/+26
When adding a rule with 32 destinations, we hit the following out-of-band access issue: BUG: KASAN: slab-out-of-bounds in mlx5_cmd_dr_create_fte+0x18ee/0x1e70 This patch fixes the issue by both increasing the allocated buffers to accommodate for the needed actions and by checking the number of actions to prevent this issue when a rule with too many actions is provided. Fixes: 1ffd498901c1 ("net/mlx5: DR, Increase supported num of actions to 32") Signed-off-by: Yevgeny Kliteynik <[email protected]> Reviewed-by: Alex Vesker <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-02-23net/mlx5: DR, Cache STE shadow memoryYevgeny Kliteynik2-35/+79
During rule insertion on each ICM memory chunk we also allocate shadow memory used for management. This includes the hw_ste, dr_ste and miss list per entry. Since the scale of these allocations is large we noticed a performance hiccup that happens once malloc and free are stressed. In extreme usecases when ~1M chunks are freed at once, it might take up to 40 seconds to complete this, up to the point the kernel sees this as self-detected stall on CPU: rcu: INFO: rcu_sched self-detected stall on CPU To resolve this we will increase the reuse of shadow memory. Doing this we see that a time in the aforementioned usecase dropped from ~40 seconds to ~8-10 seconds. Fixes: 29cf8febd185 ("net/mlx5: DR, ICM pool memory allocator") Signed-off-by: Alex Vesker <[email protected]> Signed-off-by: Yevgeny Kliteynik <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-02-23net/mlx5: Update the list of the PCI supported devicesMeir Lichtinger1-0/+2
Add the upcoming BlueField-4 and ConnectX-8 device IDs. Fixes: 2e9d3e83ab82 ("net/mlx5: Update the list of the PCI supported devices") Signed-off-by: Meir Lichtinger <[email protected]> Reviewed-by: Gal Pressman <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-02-23drm/amdgpu: check vm ready by amdgpu_vm->evicting flagQiang Yu1-2/+7
Workstation application ANSA/META v21.1.4 get this error dmesg when running CI test suite provided by ANSA/META: [drm:amdgpu_gem_va_ioctl [amdgpu]] *ERROR* Couldn't update BO_VA (-16) This is caused by: 1. create a 256MB buffer in invisible VRAM 2. CPU map the buffer and access it causes vm_fault and try to move it to visible VRAM 3. force visible VRAM space and traverse all VRAM bos to check if evicting this bo is valuable 4. when checking a VM bo (in invisible VRAM), amdgpu_vm_evictable() will set amdgpu_vm->evicting, but latter due to not in visible VRAM, won't really evict it so not add it to amdgpu_vm->evicted 5. before next CS to clear the amdgpu_vm->evicting, user VM ops ioctl will pass amdgpu_vm_ready() (check amdgpu_vm->evicted) but fail in amdgpu_vm_bo_update_mapping() (check amdgpu_vm->evicting) and get this error log This error won't affect functionality as next CS will finish the waiting VM ops. But we'd better clear the error log by checking the amdgpu_vm->evicting flag in amdgpu_vm_ready() to stop calling amdgpu_vm_bo_update_mapping() later. Another reason is amdgpu_vm->evicted list holds all BOs (both user buffer and page table), but only page table BOs' eviction prevent VM ops. amdgpu_vm->evicting flag is set only for page table BOs, so we should use evicting flag instead of evicted list in amdgpu_vm_ready(). The side effect of this change is: previously blocked VM op (user buffer in "evicted" list but no page table in it) gets done immediately. v2: update commit comments. Acked-by: Paul Menzel <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Qiang Yu <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2022-02-23drm/amdgpu: bypass tiling flag check in virtual display case (v2)Guchun Chen1-1/+1
vkms leverages common amdgpu framebuffer creation, and also as it does not support FB modifier, there is no need to check tiling flags when initing framebuffer when virtual display is enabled. This can fix below calltrace: amdgpu 0000:00:08.0: GFX9+ requires FB check based on format modifier WARNING: CPU: 0 PID: 1023 at drivers/gpu/drm/amd/amdgpu/amdgpu_display.c:1150 amdgpu_display_framebuffer_init+0x8e7/0xb40 [amdgpu] v2: check adev->enable_virtual_display instead as vkms can be enabled in bare metal as well. Signed-off-by: Leslie Shi <[email protected]> Signed-off-by: Guchun Chen <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-02-23Revert "drm/amdgpu: add modifiers in amdgpu_vkms_plane_init()"Guchun Chen1-2/+1
This reverts commit 4046afcebfc3c8c0dd5666c2671b2c192b344f78. No need to support modifier in virtual kms, otherwise, in SRIOV mode, when lanuching X server, set crtc will fail due to mismatch between primary plane modifier and framebuffer modifier. Signed-off-by: Guchun Chen <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-02-23drm/amdgpu: do not enable asic reset for raven2Chen Gong1-2/+2
The GPU reset function of raven2 is not maintained or tested, so it should be very unstable. Now the amdgpu_asic_reset function is added to amdgpu_pmops_suspend, which causes the S3 test of raven2 to fail, so the asic_reset of raven2 is ignored here. Fixes: daf8de0874ab5b ("drm/amdgpu: always reset the asic in suspend (v2)") Signed-off-by: Chen Gong <[email protected]> Acked-by: Alex Deucher <[email protected]> Reviewed-by: Mario Limonciello <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2022-02-23drm/amd/display: Fix stream->link_enc unassigned during stream removalNicholas Kazlauskas1-4/+0
[Why] Found when running igt@kms_atomic. Userspace attempts to do a TEST_COMMIT when 0 streams which calls dc_remove_stream_from_ctx. This in turn calls link_enc_unassign which ends up modifying stream->link = NULL directly, causing the global link_enc to be removed preventing further link activity and future link validation from passing. [How] We take care of link_enc unassignment at the start of link_enc_cfg_link_encs_assign so this call is no longer necessary. Fixes global state from being modified while unlocked. Reviewed-by: Jimmy Kizito <[email protected]> Acked-by: Jasdeep Dhillon <[email protected]> Signed-off-by: Nicholas Kazlauskas <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2022-02-23drm/amd: Check if ASPM is enabled from PCIe subsystemMario Limonciello1-0/+3
commit 0064b0ce85bb ("drm/amd/pm: enable ASPM by default") enabled ASPM by default but a variety of hardware configurations it turns out that this caused a regression. * PPC64LE hardware does not support ASPM at a hardware level. CONFIG_PCIEASPM is often disabled on these architectures. * Some dGPUs on ALD platforms don't work with ASPM enabled and PCIe subsystem disables it Check with the PCIe subsystem to see that ASPM has been enabled or not. Fixes: 0064b0ce85bb ("drm/amd/pm: enable ASPM by default") Link: https://wiki.raptorcs.com/w/images/a/ad/P9_PHB_version1.0_27July2018_pub.pdf Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1723 Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1739 Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1885 Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1907 Tested-by: [email protected] Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Mario Limonciello <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2022-02-23gpio: Return EPROBE_DEFER if gc->to_irq is NULLShreeya Patel1-0/+10
We are racing the registering of .to_irq when probing the i2c driver. This results in random failure of touchscreen devices. Following explains the race condition better. [gpio driver] gpio driver registers gpio chip [gpio consumer] gpio is acquired [gpio consumer] gpiod_to_irq() fails with -ENXIO [gpio driver] gpio driver registers irqchip gpiod_to_irq works at this point, but -ENXIO is fatal We could see the following errors in dmesg logs when gc->to_irq is NULL [2.101857] i2c_hid i2c-FTS3528:00: HID over i2c has not been provided an Int IRQ [2.101953] i2c_hid: probe of i2c-FTS3528:00 failed with error -22 To avoid this situation, defer probing until to_irq is registered. Returning -EPROBE_DEFER would be the first step towards avoiding the failure of devices due to the race in registration of .to_irq. Final solution to this issue would be to avoid using gc irq members until they are fully initialized. This issue has been reported many times in past and people have been using workarounds like changing the pinctrl_amd to built-in instead of loading it as a module or by adding a softdep for pinctrl_amd into the config file. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=209413 Reviewed-by: Linus Walleij <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Reported-by: kernel test robot <[email protected]> Signed-off-by: Shreeya Patel <[email protected]> Signed-off-by: Bartosz Golaszewski <[email protected]>
2022-02-23Merge tag 'for-5.17/parisc-4' of ↵Linus Torvalds1-7/+7
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc unaligned handler fixes from Helge Deller: "Two patches which fix a few bugs in the unalignment handlers. The fldd and fstd instructions weren't handled at all on 32-bit kernels, the stw instruction didn't check for fault errors and the fldw_l and ldw_m were handled wrongly as integer vs floating point instructions. Both patches are tagged for stable series" * tag 'for-5.17/parisc-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc/unaligned: Fix ldw() and stw() unalignment handlers parisc/unaligned: Fix fldd and fstd unaligned handlers on 32-bit kernel
2022-02-23Merge tag 'hwmon-for-v5.17-rc6' of ↵Linus Torvalds3-7/+14
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Fix two old bugs and one new bug in the hwmon subsystem: - In pmbus core, clear pmbus fault/warning status bits after read to follow PMBus standard - In hwmon core, handle failure to register sensor with thermal zone correctly - In ntc_thermal driver, use valid thermistor names for Samsung thermistors" * tag 'hwmon-for-v5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (pmbus) Clear pmbus fault/warning bits after read hwmon: Handle failure to register sensor with thermal zone correctly hwmon: (ntc_thermistor) Underscore Samsung thermistor
2022-02-23Merge tag 'slab-for-5.17-rc6' of ↵Linus Torvalds2-17/+16
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab Pull slab fixes from Vlastimil Babka: - Build fix (workaround) for clang. - Fix a /proc/kcore based slabinfo script broken by struct slab changes in 5.17-rc1. * tag 'slab-for-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: tools/cgroup/slabinfo: update to work with struct slab slab: remove __alloc_size attribute from __kmalloc_track_caller
2022-02-23RDMA/ib_srp: Fix a deadlockBart Van Assche1-2/+4
Remove the flush_workqueue(system_long_wq) call since flushing system_long_wq is deadlock-prone and since that call is redundant with a preceding cancel_work_sync() Link: https://lore.kernel.org/r/[email protected] Fixes: ef6c49d87c34 ("IB/srp: Eliminate state SRP_TARGET_DEAD") Reported-by: [email protected] Signed-off-by: Bart Van Assche <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2022-02-23PCI: Mark all AMD Navi10 and Navi14 GPU ATS as brokenAlex Deucher1-5/+9
There are enough VBIOS escapes without the proper workaround that some users still hit this. Microsoft never productized ATS on Windows so OEM platforms that were Windows-only didn't always validate ATS. The advantages of ATS are not worth it compared to the potential instabilities on harvested boards. Disable ATS on all Navi10 and Navi14 boards. Symptoms include: amdgpu 0000:07:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0007 address=0xffffc02000 flags=0x0000] AMD-Vi: Event logged [IO_PAGE_FAULT device=07:00.0 domain=0x0007 address=0xffffc02000 flags=0x0000] [drm:amdgpu_job_timedout [amdgpu]] *ERROR* ring sdma0 timeout, signaled seq=6047, emitted seq=6049 amdgpu 0000:07:00.0: amdgpu: GPU reset begin! amdgpu 0000:07:00.0: amdgpu: GPU reset succeeded, trying to resume amdgpu 0000:07:00.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring sdma0 test failed (-110) [drm:amdgpu_device_ip_resume_phase2 [amdgpu]] *ERROR* resume of IP block <sdma_v4_0> failed -110 amdgpu 0000:07:00.0: amdgpu: GPU reset(1) failed Related commits: e8946a53e2a6 ("PCI: Mark AMD Navi14 GPU ATS as broken") a2da5d8cc0b0 ("PCI: Mark AMD Raven iGPU ATS as broken in some platforms") 45beb31d3afb ("PCI: Mark AMD Navi10 GPU rev 0x00 ATS as broken") 5e89cd303e3a ("PCI: Mark AMD Navi14 GPU rev 0xc5 ATS as broken") d28ca864c493 ("PCI: Mark AMD Stoney Radeon R7 GPU ATS as broken") 9b44b0b09dec ("PCI: Mark AMD Stoney GPU ATS as broken") [bhelgaas: add symptoms and related commits] Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1760 Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Christian König <[email protected]> Acked-by: Guchun Chen <[email protected]>
2022-02-23parisc/unaligned: Fix ldw() and stw() unalignment handlersHelge Deller1-3/+3
Fix 3 bugs: a) emulate_stw() doesn't return the error code value, so faulting instructions are not reported and aborted. b) Tell emulate_ldw() to handle fldw_l as floating point instruction c) Tell emulate_ldw() to handle ldw_m as integer instruction Signed-off-by: Helge Deller <[email protected]> Cc: [email protected]
2022-02-23parisc/unaligned: Fix fldd and fstd unaligned handlers on 32-bit kernelHelge Deller1-4/+4
Usually the kernel provides fixup routines to emulate the fldd and fstd floating-point instructions if they load or store 8-byte from/to a not natuarally aligned memory location. On a 32-bit kernel I noticed that those unaligned handlers didn't worked and instead the application got a SEGV. While checking the code I found two problems: First, the OPCODE_FLDD_L and OPCODE_FSTD_L cases were ifdef'ed out by the CONFIG_PA20 option, and as such those weren't built on a pure 32-bit kernel. This is now fixed by moving the CONFIG_PA20 #ifdef to prevent the compilation of OPCODE_LDD_L and OPCODE_FSTD_L only, and handling the fldd and fstd instructions. The second problem are two bugs in the 32-bit inline assembly code, where the wrong registers where used. The calculation of the natural alignment used %2 (vall) instead of %3 (ior), and the first word was stored back to address %1 (valh) instead of %3 (ior). Signed-off-by: Helge Deller <[email protected]> Cc: [email protected]
2022-02-23btrfs: autodefrag: only scan one inode onceQu Wenruo1-62/+22
Although we have btrfs_requeue_inode_defrag(), for autodefrag we are still just exhausting all inode_defrag items in the tree. This means, it doesn't make much difference to requeue an inode_defrag, other than scan the inode from the beginning till its end. Change the behaviour to always scan from offset 0 of an inode, and till the end. By this we get the following benefit: - Straight-forward code - No more re-queue related check - Fewer members in inode_defrag We still keep the same btrfs_get_fs_root() and btrfs_iget() check for each loop, and added extra should_auto_defrag() check per-loop. Note: the patch needs to be backported and is intentionally written to minimize the diff size, code will be cleaned up later. CC: [email protected] # 5.16 Signed-off-by: Qu Wenruo <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2022-02-23btrfs: defrag: don't use merged extent map for their generation checkQu Wenruo3-0/+24
For extent maps, if they are not compressed extents and are adjacent by logical addresses and file offsets, they can be merged into one larger extent map. Such merged extent map will have the higher generation of all the original ones. But this brings a problem for autodefrag, as it relies on accurate extent_map::generation to determine if one extent should be defragged. For merged extent maps, their higher generation can mark some older extents to be defragged while the original extent map doesn't meet the minimal generation threshold. Thus this will cause extra IO. So solve the problem, here we introduce a new flag, EXTENT_FLAG_MERGED, to indicate if the extent map is merged from one or more ems. And for autodefrag, if we find a merged extent map, and its generation meets the generation requirement, we just don't use this one, and go back to defrag_get_extent() to read extent maps from subvolume trees. This could cause more read IO, but should result less defrag data write, so in the long run it should be a win for autodefrag. Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Qu Wenruo <[email protected]> Signed-off-by: David Sterba <[email protected]>
2022-02-23btrfs: defrag: bring back the old file extent search behaviorQu Wenruo1-4/+157
For defrag, we don't really want to use btrfs_get_extent() to iterate all extent maps of an inode. The reasons are: - btrfs_get_extent() can merge extent maps And the result em has the higher generation of the two, causing defrag to mark unnecessary part of such merged large extent map. This in fact can result extra IO for autodefrag in v5.16+ kernels. However this patch is not going to completely solve the problem, as one can still using read() to trigger extent map reading, and got them merged. The completely solution for the extent map merging generation problem will come as an standalone fix. - btrfs_get_extent() caches the extent map result Normally it's fine, but for defrag the target range may not get another read/write for a long long time. Such cache would only increase the memory usage. - btrfs_get_extent() doesn't skip older extent map Unlike the old find_new_extent() which uses btrfs_search_forward() to skip the older subtree, thus it will pick up unnecessary extent maps. This patch will fix the regression by introducing defrag_get_extent() to replace the btrfs_get_extent() call. This helper will: - Not cache the file extent we found It will search the file extent and manually convert it to em. - Use btrfs_search_forward() to skip entire ranges which is modified in the past This should reduce the IO for autodefrag. Reported-by: Filipe Manana <[email protected]> Fixes: 7b508037d4ca ("btrfs: defrag: use defrag_one_cluster() to implement btrfs_defrag_file()") Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Qu Wenruo <[email protected]> Signed-off-by: David Sterba <[email protected]>
2022-02-23btrfs: defrag: remove an ambiguous condition for rejectionQu Wenruo1-4/+0
From the very beginning of btrfs defrag, there is a check to reject extents which meet both conditions: - Physically adjacent We may want to defrag physically adjacent extents to reduce the number of extents or the size of subvolume tree. - Larger than 128K This may be there for compressed extents, but unfortunately 128K is exactly the max capacity for compressed extents. And the check is > 128K, thus it never rejects compressed extents. Furthermore, the compressed extent capacity bug is fixed by previous patch, there is no reason for that check anymore. The original check has a very small ranges to reject (the target extent size is > 128K, and default extent threshold is 256K), and for compressed extent it doesn't work at all. So it's better just to remove the rejection, and allow us to defrag physically adjacent extents. CC: [email protected] # 5.16 Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Qu Wenruo <[email protected]> Signed-off-by: David Sterba <[email protected]>
2022-02-23btrfs: defrag: don't defrag extents which are already at max capacityQu Wenruo1-0/+20
[BUG] For compressed extents, defrag ioctl will always try to defrag any compressed extents, wasting not only IO but also CPU time to compress/decompress: mkfs.btrfs -f $DEV mount -o compress $DEV $MNT xfs_io -f -c "pwrite -S 0xab 0 128K" $MNT/foobar sync xfs_io -f -c "pwrite -S 0xcd 128K 128K" $MNT/foobar sync echo "=== before ===" xfs_io -c "fiemap -v" $MNT/foobar btrfs filesystem defrag $MNT/foobar sync echo "=== after ===" xfs_io -c "fiemap -v" $MNT/foobar Then it shows the 2 128K extents just get COW for no extra benefit, with extra IO/CPU spent: === before === /mnt/btrfs/file1: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..255]: 26624..26879 256 0x8 1: [256..511]: 26632..26887 256 0x9 === after === /mnt/btrfs/file1: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..255]: 26640..26895 256 0x8 1: [256..511]: 26648..26903 256 0x9 This affects not only v5.16 (after the defrag rework), but also v5.15 (before the defrag rework). [CAUSE] From the very beginning, btrfs defrag never checks if one extent is already at its max capacity (128K for compressed extents, 128M otherwise). And the default extent size threshold is 256K, which is already beyond the compressed extent max size. This means, by default btrfs defrag ioctl will mark all compressed extent which is not adjacent to a hole/preallocated range for defrag. [FIX] Introduce a helper to grab the maximum extent size, and then in defrag_collect_targets() and defrag_check_next_extent(), reject extents which are already at their max capacity. Reported-by: Filipe Manana <[email protected]> CC: [email protected] # 5.16 Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Qu Wenruo <[email protected]> Signed-off-by: David Sterba <[email protected]>
2022-02-23btrfs: defrag: don't try to merge regular extents with preallocated extentsQu Wenruo1-6/+11
[BUG] With older kernels (before v5.16), btrfs will defrag preallocated extents. While with newer kernels (v5.16 and newer) btrfs will not defrag preallocated extents, but it will defrag the extent just before the preallocated extent, even it's just a single sector. This can be exposed by the following small script: mkfs.btrfs -f $dev > /dev/null mount $dev $mnt xfs_io -f -c "pwrite 0 4k" -c sync -c "falloc 4k 16K" $mnt/file xfs_io -c "fiemap -v" $mnt/file btrfs fi defrag $mnt/file sync xfs_io -c "fiemap -v" $mnt/file The output looks like this on older kernels: /mnt/btrfs/file: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..7]: 26624..26631 8 0x0 1: [8..39]: 26632..26663 32 0x801 /mnt/btrfs/file: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..39]: 26664..26703 40 0x1 Which defrags the single sector along with the preallocated extent, and replace them with an regular extent into a new location (caused by data COW). This wastes most of the data IO just for the preallocated range. On the other hand, v5.16 is slightly better: /mnt/btrfs/file: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..7]: 26624..26631 8 0x0 1: [8..39]: 26632..26663 32 0x801 /mnt/btrfs/file: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..7]: 26664..26671 8 0x0 1: [8..39]: 26632..26663 32 0x801 The preallocated range is not defragged, but the sector before it still gets defragged, which has no need for it. [CAUSE] One of the function reused by the old and new behavior is defrag_check_next_extent(), it will determine if we should defrag current extent by checking the next one. It only checks if the next extent is a hole or inlined, but it doesn't check if it's preallocated. On the other hand, out of the function, both old and new kernel will reject preallocated extents. Such inconsistent behavior causes above behavior. [FIX] - Also check if next extent is preallocated If so, don't defrag current extent. - Add comments for each branch why we reject the extent This will reduce the IO caused by defrag ioctl and autodefrag. CC: [email protected] # 5.16 Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Qu Wenruo <[email protected]> Signed-off-by: David Sterba <[email protected]>
2022-02-23nvme-tcp: send H2CData PDUs based on MAXH2CDATAVarun Prakash2-14/+50
As per NVMe/TCP specification (revision 1.0a, section 3.6.2.3) Maximum Host to Controller Data length (MAXH2CDATA): Specifies the maximum number of PDU-Data bytes per H2CData PDU in bytes. This value is a multiple of dwords and should be no less than 4,096. Current code sets H2CData PDU data_length to r2t_length, it does not check MAXH2CDATA value. Fix this by setting H2CData PDU data_length to min(req->h2cdata_left, queue->maxh2cdata). Also validate MAXH2CDATA value returned by target in ICResp PDU, if it is not a multiple of dword or if it is less than 4096 return -EINVAL from nvme_tcp_init_connection(). Signed-off-by: Varun Prakash <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2022-02-23nvme: also mark passthrough-only namespaces ready in nvme_update_ns_infoChristoph Hellwig1-3/+3
Commit e7d65803e2bb ("nvme-multipath: revalidate paths during rescan") introduced the NVME_NS_READY flag, which nvme_path_is_disabled() uses to check if a path can be used or not. We also need to set this flag for devices that fail the ZNS feature validation and which are available through passthrough devices only to that they can be used in multipathing setups. Fixes: e7d65803e2bb ("nvme-multipath: revalidate paths during rescan") Reported-by: Kanchan Joshi <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Reviewed-by: Daniel Wagner <[email protected]> Tested-by: Kanchan Joshi <[email protected]>
2022-02-23nvme: don't return an error from nvme_configure_metadataChristoph Hellwig1-8/+5
When a fabrics controller claims to support an invalidate metadata configuration we already warn and disable metadata support. No need to also return an error during revalidation. Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Reviewed-by: Daniel Wagner <[email protected]> Tested-by: Kanchan Joshi <[email protected]>
2022-02-23drm/edid: Always set RGB444Maxime Ripard1-1/+1
In order to fill the drm_display_info structure each time an EDID is read, the code currently will call drm_add_display_info with the parsed EDID. drm_add_display_info will then call drm_reset_display_info to reset all the fields to 0, and then set them to the proper value depending on the EDID. In the color_formats case, we will thus report that we don't support any color format, and then fill it back with RGB444 plus the additional formats described in the EDID Feature Support byte. However, since that byte only contains format-related bits since the 1.4 specification, this doesn't happen if the EDID is following an earlier specification. In turn, it means that for one of these EDID, we end up with color_formats set to 0. The EDID 1.3 specification never really specifies what it means by RGB exactly, but since both HDMI and DVI will use RGB444, it's fairly safe to assume it's supposed to be RGB444. Let's move the addition of RGB444 to color_formats earlier in drm_add_display_info() so that it's always set for a digital display. Fixes: da05a5a71ad8 ("drm: parse color format support for digital displays") Cc: Ville Syrjälä <[email protected]> Reported-by: Matthias Reichl <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-02-23Merge branch 'ftgmac100-fixes'David S. Miller1-114/+129
Heyi Guo says: ==================== drivers/net/ftgmac100: fix occasional DHCP failure This patch set is to fix the issues discussed in the mail thread: https://lore.kernel.org/netdev/[email protected]/ and follows the advice from Andrew Lunn. The first 2 patches refactors the code to enable adjust_link calling reset function directly. ==================== Signed-off-by: David S. Miller <[email protected]>
2022-02-23drivers/net/ftgmac100: fix DHCP potential failure with systemdHeyi Guo1-2/+11
DHCP failures were observed with systemd 247.6. The issue could be reproduced by rebooting Aspeed 2600 and then running ifconfig ethX down/up. It is caused by below procedures in the driver: 1. ftgmac100_open() enables net interface and call phy_start() 2. When PHY is link up, it calls netif_carrier_on() and then adjust_link callback 3. ftgmac100_adjust_link() will schedule the reset task 4. ftgmac100_reset_task() will then reset the MAC in another schedule After step 2, systemd will be notified to send DHCP discover packet, while the packet might be corrupted by MAC reset operation in step 4. Call ftgmac100_reset() directly instead of scheduling task to fix the issue. Signed-off-by: Heyi Guo <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-23drivers/net/ftgmac100: adjust code place for function call dependencyHeyi Guo1-111/+111
This is to prepare for ftgmac100_adjust_link() to call ftgmac100_reset() directly. Only code places are changed. Signed-off-by: Heyi Guo <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-23drivers/net/ftgmac100: refactor ftgmac100_reset_task to enable direct ↵Heyi Guo1-3/+9
function call This is to prepare for ftgmac100_adjust_link() to call reset function directly, instead of task schedule. Signed-off-by: Heyi Guo <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-23net: sched: avoid newline at end of message in NL_SET_ERR_MSG_MODWan Jiabing1-1/+1
Fix following coccicheck warning: ./net/sched/act_api.c:277:7-49: WARNING avoid newline at end of message in NL_SET_ERR_MSG_MOD Signed-off-by: Wan Jiabing <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-23MAINTAINERS: add myself as co-maintainer for Realtek DSA switch driversAlvin Šipraga1-0/+1
Adding myself (Alvin Šipraga) as another maintainer for the Realtek DSA switch drivers. I intend to help Linus out with reviewing and testing changes to these drivers, particularly the rtl8365mb driver which I authored and have hardware access to. Cc: Linus Walleij <[email protected]> Signed-off-by: Alvin Šipraga <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-23tipc: Fix end of loop tests for list_for_each_entry()Dan Carpenter2-2/+2
These tests are supposed to check if the loop exited via a break or not. However the tests are wrong because if we did not exit via a break then "p" is not a valid pointer. In that case, it's the equivalent of "if (*(u32 *)sr == *last_key) {". That's going to work most of the time, but there is a potential for those to be equal. Fixes: 1593123a6a49 ("tipc: add name table dump to new netlink api") Fixes: 1a1a143daf84 ("tipc: add publication dump to new netlink api") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-23udp_tunnel: Fix end of loop test in udp_tunnel_nic_unregister()Dan Carpenter1-1/+1
This test is checking if we exited the list via break or not. However if it did not exit via a break then "node" does not point to a valid udp_tunnel_nic_shared_node struct. It will work because of the way the structs are laid out it's the equivalent of "if (info->shared->udp_tunnel_nic_info != dev)" which will always be true, but it's not the right way to test. Fixes: 74cc6d182d03 ("udp_tunnel: add the ability to share port tables") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-23vhost/vsock: don't check owner in vhost_vsock_stop() while releasingStefano Garzarella1-7/+14
vhost_vsock_stop() calls vhost_dev_check_owner() to check the device ownership. It expects current->mm to be valid. vhost_vsock_stop() is also called by vhost_vsock_dev_release() when the user has not done close(), so when we are in do_exit(). In this case current->mm is invalid and we're releasing the device, so we should clean it anyway. Let's check the owner only when vhost_vsock_stop() is called by an ioctl. When invoked from release we can not fail so we don't check return code of vhost_vsock_stop(). We need to stop vsock even if it's not the owner. Fixes: 433fc58e6bf2 ("VSOCK: Introduce vhost_vsock.ko") Cc: [email protected] Reported-by: [email protected] Reported-and-tested-by: [email protected] Signed-off-by: Stefano Garzarella <[email protected]> Acked-by: Jason Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-23drm/tegra: dpaux: Populate AUX busThierry Reding2-0/+8
The DPAUX hardware block exposes an DP AUX interface that provides access to an AUX bus and the devices on that bus. Use the DP AUX bus infrastructure that was recently introduced to probe devices on this bus from DT. Signed-off-by: Thierry Reding <[email protected]>
2022-02-23drm/radeon: fix variable typeChristian König1-4/+4
When we switch to dma_resv_wait_timeout() the returned type changes as well. Signed-off-by: Christian König <[email protected]> Fixes: 89aae41d740f ("drm/radeon: use dma_resv_wait_timeout() instead of manually waiting") Bug: https://bugzilla.kernel.org/show_bug.cgi?id=215600 Reviewed-by: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-02-22ibmvnic: schedule failover only if vioctl failsSukadev Bhattiprolu1-1/+5
If client is unable to initiate a failover reset via H_VIOCTL hcall, then it should schedule a failover reset as a last resort. Otherwise, there is no need to do a last resort. Fixes: 334c42414729 ("ibmvnic: improve failover sysfs entry") Reported-by: Cris Forno <[email protected]> Signed-off-by: Sukadev Bhattiprolu <[email protected]> Signed-off-by: Dany Madden <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-22net: dsa: fix panic when removing unoffloaded port from bridgeAlvin Šipraga1-1/+8
If a bridged port is not offloaded to the hardware - either because the underlying driver does not implement the port_bridge_{join,leave} ops, or because the operation failed - then its dp->bridge pointer will be NULL when dsa_port_bridge_leave() is called. Avoid dereferncing NULL. This fixes the following splat when removing a port from a bridge: Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT_RT SMP CPU: 3 PID: 1119 Comm: brctl Tainted: G O 5.17.0-rc4-rt4 #1 Call trace: dsa_port_bridge_leave+0x8c/0x1e4 dsa_slave_changeupper+0x40/0x170 dsa_slave_netdevice_event+0x494/0x4d4 notifier_call_chain+0x80/0xe0 raw_notifier_call_chain+0x1c/0x24 call_netdevice_notifiers_info+0x5c/0xac __netdev_upper_dev_unlink+0xa4/0x200 netdev_upper_dev_unlink+0x38/0x60 del_nbp+0x1b0/0x300 br_del_if+0x38/0x114 add_del_if+0x60/0xa0 br_ioctl_stub+0x128/0x2dc br_ioctl_call+0x68/0xb0 dev_ifsioc+0x390/0x554 dev_ioctl+0x128/0x400 sock_do_ioctl+0xb4/0xf4 sock_ioctl+0x12c/0x4e0 __arm64_sys_ioctl+0xa8/0xf0 invoke_syscall+0x4c/0x110 el0_svc_common.constprop.0+0x48/0xf0 do_el0_svc+0x28/0x84 el0_svc+0x1c/0x50 el0t_64_sync_handler+0xa8/0xb0 el0t_64_sync+0x17c/0x180 Code: f9402f00 f0002261 f9401302 913cc021 (a9401404) ---[ end trace 0000000000000000 ]--- Fixes: d3eed0e57d5d ("net: dsa: keep the bridge_dev and bridge_num as part of the same structure") Signed-off-by: Alvin Šipraga <[email protected]> Reviewed-by: Vladimir Oltean <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-23ata: pata_hpt37x: disable primary channel on HPT371Sergey Shtylyov1-0/+14
The HPT371 chip physically has only one channel, the secondary one, however the primary channel registers do exist! Thus we have to manually disable the non-existing channel if the BIOS hasn't done this already. Similarly to the pata_hpt3x2n driver, always disable the primary channel. Fixes: 669a5db411d8 ("[libata] Add a bunch of PATA drivers.") Cc: [email protected] Signed-off-by: Sergey Shtylyov <[email protected]> Signed-off-by: Damien Le Moal <[email protected]>
2022-02-22net: __pskb_pull_tail() & pskb_carve_frag_list() drop_monitor friendsEric Dumazet1-2/+2
Whenever one of these functions pull all data from an skb in a frag_list, use consume_skb() instead of kfree_skb() to avoid polluting drop monitoring. Fixes: 6fa01ccd8830 ("skbuff: Add pskb_extract() helper function") Signed-off-by: Eric Dumazet <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-22perf script: Fix error when printing 'weight' fieldGerman Gomez1-1/+1
In SPE traces the 'weight' field can't be printed in 'perf script' because the 'dummy:u' event doesn't have the WEIGHT attribute set. Use evsel__do_check_stype(..) to check this field, as it's done with other fields such as "phys_addr". Before: $ perf record -e arm_spe_0// -- sleep 1 $ perf script -F event,ip,weight Samples for 'dummy:u' event do not have WEIGHT attribute set. Cannot print 'weight' field. After: $ perf script -F event,ip,weight l1d-access: 12 ffffaf629d4cb320 tlb-access: 12 ffffaf629d4cb320 memory: 12 ffffaf629d4cb320 Fixes: b0fde9c6e291e528 ("perf arm-spe: Add SPE total latency as PERF_SAMPLE_WEIGHT") Signed-off-by: German Gomez <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-02-22Merge branch 'for-5.17-fixes' of ↵Linus Torvalds3-7/+25
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fixes from Tejun Heo: - Fix for a subtle bug in the recent release_agent permission check update - Fix for a long-standing race condition between cpuset and cpu hotplug - Comment updates * 'for-5.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cpuset: Fix kernel-doc cgroup-v1: Correct privileges check in release_agent writes cgroup: clarify cgroup_css_set_fork() cgroup/cpuset: Fix a race between cpuset_attach() and cpu hotplug
Powered by cgit, Gruvboxed by Blaster4385.