| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The previous cleanup with devres may lead to the incorrect release
orders at the probe error handling due to the devres's nature. Until
we register the card, snd_card_free() has to be called at first for
releasing the stuff properly when the driver tries to manage and
release the stuff via card->private_free().
This patch fixes it by calling snd_card_free() on the error from the
probe callback using a new helper function.
Fixes: 0e175f665960 ("ALSA: als4000: Allocate resources with device-managed APIs")
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
The recent cleanup with devres may lead to the incorrect release
orders at the probe error handling due to the devres's nature. Until
we register the card, snd_card_free() has to be called at first for
releasing the stuff properly when the driver tries to manage and
release the stuff via card->private_free().
This patch fixes it by calling snd_card_free() on the error from the
probe callback using a new helper function.
Fixes: 1f0819979248 ("ALSA: ali5451: Allocate resources with device-managed APIs")
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
The previous cleanup with devres may lead to the incorrect release
orders at the probe error handling due to the devres's nature. Until
we register the card, snd_card_free() has to be called at first for
releasing the stuff properly when the driver tries to manage and
release the stuff via card->private_free().
This patch fixes it by calling snd_card_free() on the error from the
probe callback using a new helper function.
Fixes: 567f58754109 ("ALSA: ad1889: Allocate resources with device-managed APIs")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
The previous cleanup with devres may lead to the incorrect release
orders at the probe error handling due to the devres's nature. Until
we register the card, snd_card_free() has to be called at first for
releasing the stuff properly when the driver tries to manage and
release the stuff via card->private_free().
This patch fixes it by calling snd_card_free() on the error from the
probe callback using a new helper function.
Fixes: 111601ff76e9 ("ALSA: sc6000: Allocate resources with device-managed APIs")
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
The previous cleanup with devres may lead to the incorrect release
orders at the probe error handling due to the devres's nature. Until
we register the card, snd_card_free() has to be called at first for
releasing the stuff properly when the driver tries to manage and
release the stuff via card->private_free().
This patch fixes it by calling snd_card_free() on the error from the
probe callback using a new helper function.
Fixes: 35a245ec0619 ("ALSA: galaxy: Allocate resources with device-managed APIs")
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
io-wq work cancellation path can't take uring_lock as how it's done on
file assignment, we have to handle IO_WQ_WORK_CANCEL first, this fixes
encountered hangs.
Fixes: 6bf9c47a3989 ("io_uring: defer file assignment")
Signed-off-by: Pavel Begunkov <[email protected]>
Link: https://lore.kernel.org/r/0d9b9f37841645518503f6a207e509d14a286aba.1649773463.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <[email protected]>
|
|
Signed-off-by: Sven Schnelle <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
|
|
s390 defines current_stack_pointer as function while all other
architectures use 'register unsigned long asm("<stackptr reg>").
This make codes like the following from check_stack_object() fail:
if (IS_ENABLED(CONFIG_STACK_GROWSUP)) {
if ((void *)current_stack_pointer < obj + len)
return BAD_STACK;
} else {
if (obj < (void *)current_stack_pointer)
return BAD_STACK;
}
because this would compare the address of current_stack_pointer() and
not the stackpointer value.
Reported-by: Karsten Graul <[email protected]>
Fixes: 2792d84e6da5 ("usercopy: Check valid lifetime via stack depth")
Cc: Kees Cook <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Cc: Alexander Gordeev <[email protected]>
Signed-off-by: Sven Schnelle <[email protected]>
Reviewed-by: Heiko Carstens <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
|
|
The previous cleanup with devres may lead to the incorrect release
orders at the probe error handling due to the devres's nature. Until
we register the card, snd_card_free() has to be called at first for
releasing the stuff properly when the driver tries to manage and
release the stuff via card->private_free().
This patch fixes it by calling snd_card_free() on the error from the
probe callback using a new helper function.
Fixes: 9c211bf392bb ("ALSA: echoaudio: Allocate resources with device-managed APIs")
Reported-and-tested-by: Zheyu Ma <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/CAMhUBjm2AdyEZ_-EgexdNDN7SvY4f89=4=FwAL+c0Mg0O+X50A@mail.gmail.com
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
This is a small helper function to handle the error path more easily
when an error happens during the probe for the device with the
device-managed card. Since devres releases in the reverser order of
the creations, usually snd_card_free() gets called at the last in the
probe error path unless it already reached snd_card_register() calls.
Due to this nature, when a driver expects the resource releases in
card->private_free, this might be called too lately.
As a workaround, one should call the probe like:
static int __some_probe(...) { // do real probe.... }
static int some_probe(...)
{
return snd_card_free_on_error(dev, __some_probe(dev, ...));
}
so that the snd_card_free() is called explicitly at the beginning of
the error path from the probe.
This function will be used in the upcoming fixes to address the
regressions by devres usages.
Fixes: e8ad415b7a55 ("ALSA: core: Add managed card creation")
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Since commit 6e1acfa387b9 ("netfilter: nf_tables: validate registers
coming from userspace.") nft_parse_register can return a negative value,
but the function prototype is still returning an unsigned int.
Fixes: 6e1acfa387b9 ("netfilter: nf_tables: validate registers coming from userspace.")
Signed-off-by: Antoine Tenart <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers fixes from Hans de Goede:
- Documentation and compilation warning fixes
- Kconfig dep fixes
- Misc small code cleanups
* tag 'platform-drivers-x86-v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: amd-pmc: Fix compilation without CONFIG_SUSPEND
platform/x86: acerhdf: Cleanup str_starts_with()
Documentation/ABI: sysfs-class-firmware-attributes: Misc. cleanups
Documentation/ABI: sysfs-class-firmware-attributes: Fix Sphinx errors
Documentation/ABI: sysfs-driver-intel_sdsi: Fix sphinx warnings
platform/x86: barco-p50-gpio: Fix duplicate included linux/io.h
platform/x86: samsung-laptop: Fix an unsigned comparison which can never be negative
platform/x86: think-lmi: certificate support clean ups
|
|
Horatiu Vultur says:
====================
net: lan966x: lan966x fixes
This contains different fixes for lan966x in different areas like PTP, MAC,
Switchdev and IGMP processing.
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Currently when getting a new MAC is learn, the HW generates an
interrupt. So then the SW will check the new entry and checks if it
arrived on a correct port. If it didn't just generate a warning.
But this could still crash the system. Therefore stop processing that
entry when an issue is seen.
Fixes: 5ccd66e01cbef8 ("net: lan966x: add support for interrupts from analyzer")
Signed-off-by: Horatiu Vultur <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
On lan966x it is not allowed to have foreign interfaces under a bridge
which already contains lan966x ports. So when a port leaves the bridge
it would call switchdev_bridge_port_unoffload which eventually will
notify the other ports that bridge left the vlan group but that is not
true because the bridge is still part of the vlan group.
Therefore when a port leaves the bridge, stop generating replays because
already the HW cleared after itself and the other ports don't need to do
anything else.
Fixes: cf2f60897e921e ("net: lan966x: Add support to offload the forwarding.")
Signed-off-by: Horatiu Vultur <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
In case an IGMP frame has a vlan tag, then the function
lan966x_hw_offload couldn't figure out that is a IGMP frame. Therefore
the SW thinks that the frame was already forward by the HW which is not
true.
Extend lan966x_hw_offload to pop the vlan tag if are any and then check
for IGMP frames.
Fixes: 47aeea0d57e80c ("net: lan966x: Implement the callback SWITCHDEV_ATTR_ID_BRIDGE_MC_DISABLED ")
Signed-off-by: Horatiu Vultur <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The clk_per_cfg register represents the value added to the system clock
for each clock cycle. The issue is that the default value is wrong,
meaning that in case the DUT was a grandmaster then everone in the
network was too slow. In case there was a grandmaster, then there is no
issue because the DUT will configure clk_per_cfg register based on the
master frequency.
Fixes: d096459494a887 ("net: lan966x: Add support for ptp clocks")
Signed-off-by: Horatiu Vultur <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Function sctp_do_peeloff() wrongly initializes daddr of the original
socket instead of the peeled off socket, which makes getpeername()
return zeroes instead of the primary address. Initialize the new socket
instead.
Fixes: d570ee490fb1 ("[SCTP]: Correctly set daddr for IPv6 sockets during peeloff")
Signed-off-by: Petr Malat <[email protected]>
Acked-by: Marcelo Ricardo Leitner <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
I've been doing a lot of iscsi patches because Oracle is paying me to work
on iSCSI again. It was supposed to be temp assignment, but my co-worker
that was working on iscsi moved to a new group so it looks like I'm back on
this code again. After talking to Chris and Lee this patch adds me back as
co-maintainer, so I can help them and people remember to cc me on issues.
Link: https://lore.kernel.org/r/[email protected]
Tested-by: Manish Rangankar <[email protected]>
Acked-by: Lee Duncan <[email protected]>
Acked-by: Chris Leech <[email protected]>
Signed-off-by: Mike Christie <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
We set the qedi_ep state to EP_STATE_OFLDCONN_START when the ep is
created. Then in qedi_set_path we kick off the offload work. If userspace
times out the connection and calls ep_disconnect, qedi will only flush the
offload work if the qedi_ep state has transitioned away from
EP_STATE_OFLDCONN_START. If we can't connect we will not have transitioned
state and will leave the offload work running, and we will free the qedi_ep
from under it.
This patch just has us init the work when we create the ep, then always
flush it.
Link: https://lore.kernel.org/r/[email protected]
Tested-by: Manish Rangankar <[email protected]>
Reviewed-by: Lee Duncan <[email protected]>
Reviewed-by: Chris Leech <[email protected]>
Acked-by: Manish Rangankar <[email protected]>
Signed-off-by: Mike Christie <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
If a offload driver doesn't use the xmit workqueue, then when we are doing
ep_disconnect libiscsi can still inject PDUs to the driver. This adds a
check for if the connection is bound before trying to inject PDUs.
Link: https://lore.kernel.org/r/[email protected]
Tested-by: Manish Rangankar <[email protected]>
Reviewed-by: Lee Duncan <[email protected]>
Reviewed-by: Chris Leech <[email protected]>
Signed-off-by: Mike Christie <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Move the tx and rx suspend fields into one flags field.
Link: https://lore.kernel.org/r/[email protected]
Tested-by: Manish Rangankar <[email protected]>
Reviewed-by: Lee Duncan <[email protected]>
Reviewed-by: Chris Leech <[email protected]>
Signed-off-by: Mike Christie <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
If a driver raises a connection error before the connection is bound, we
can leave a cleanup_work queued that can later run and disconnect/stop a
connection that is logged in. The problem is that drivers can call
iscsi_conn_error_event for endpoints that are connected but not yet bound
when something like the network port they are using is brought down.
iscsi_cleanup_conn_work_fn will check for this and exit early, but if the
cleanup_work is stuck behind other works, it might not get run until after
userspace has done ep_disconnect. Because the endpoint is not yet bound
there was no way for ep_disconnect to flush the work.
The bug of leaving stop_conns queued was added in:
Commit 23d6fefbb3f6 ("scsi: iscsi: Fix in-kernel conn failure handling")
and:
Commit 0ab710458da1 ("scsi: iscsi: Perform connection failure entirely in
kernel space")
was supposed to fix it, but left this case.
This patch moves the conn state check to before we even queue the work so
we can avoid queueing.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 0ab710458da1 ("scsi: iscsi: Perform connection failure entirely in kernel space")
Tested-by: Manish Rangankar <[email protected]>
Reviewed-by: Lee Duncan <lduncan@@suse.com>
Reviewed-by: Chris Leech <[email protected]>
Signed-off-by: Mike Christie <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
If iscsid is doing a stop_conn at the same time the kernel is starting
error recovery we can hit a race that allows the cleanup work to run on a
valid connection. In the race, iscsi_if_stop_conn sees the cleanup bit set,
but it calls flush_work on the clean_work before iscsi_conn_error_event has
queued it. The flush then returns before the queueing and so the
cleanup_work can run later and disconnect/stop a conn while it's in a
connected state.
The patch:
Commit 0ab710458da1 ("scsi: iscsi: Perform connection failure entirely in
kernel space")
added the late stop_conn call bug originally, and the patch:
Commit 23d6fefbb3f6 ("scsi: iscsi: Fix in-kernel conn failure handling")
attempted to fix it but only fixed the normal EH case and left the above
race for the iscsid restart case. For the normal EH case we don't hit the
race because we only signal userspace to start recovery after we have done
the queueing, so the flush will always catch the queued work or see it
completed.
For iscsid restart cases like boot, we can hit the race because iscsid will
call down to the kernel before the kernel has signaled any error, so both
code paths can be running at the same time. This adds a lock around the
setting of the cleanup bit and queueing so they happen together.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 0ab710458da1 ("scsi: iscsi: Perform connection failure entirely in kernel space")
Tested-by: Manish Rangankar <[email protected]>
Reviewed-by: Lee Duncan <[email protected]>
Reviewed-by: Chris Leech <[email protected]>
Signed-off-by: Mike Christie <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
This patch fixes a bug where when using iSCSI offload we can free an
endpoint while userspace still thinks it's active. That then causes the
endpoint ID to be reused for a new connection's endpoint while userspace
still thinks the ID is for the original connection. Userspace will then end
up disconnecting a running connection's endpoint or trying to bind to
another connection's endpoint.
This bug is a regression added in:
Commit 23d6fefbb3f6 ("scsi: iscsi: Fix in-kernel conn failure handling")
where we added a in kernel ep_disconnect call to fix a bug in:
Commit 0ab710458da1 ("scsi: iscsi: Perform connection failure entirely in
kernel space")
where we would call stop_conn without having done ep_disconnect. This early
ep_disconnect call will then free the endpoint and it's ID while userspace
still thinks the ID is valid.
Fix the early release of the ID by having the in kernel recovery code keep
a reference to the endpoint until userspace has called into the kernel to
finish cleaning up the endpoint/connection. It requires the previous commit
"scsi: iscsi: Release endpoint ID when its freed" which moved the freeing
of the ID until when the endpoint is released.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 23d6fefbb3f6 ("scsi: iscsi: Fix in-kernel conn failure handling")
Tested-by: Manish Rangankar <[email protected]>
Reviewed-by: Lee Duncan <[email protected]>
Reviewed-by: Chris Leech <[email protected]>
Signed-off-by: Mike Christie <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
We can't release the endpoint ID until all references to the endpoint have
been dropped or it could be allocated while in use. This has us use an idr
instead of looping over all conns to find a free ID and then free the ID
when all references have been dropped instead of when the device is only
deleted.
Link: https://lore.kernel.org/r/[email protected]
Tested-by: Manish Rangankar <[email protected]>
Reviewed-by: Lee Duncan <[email protected]>
Reviewed-by: Chris Leech <[email protected]>
Reviewed-by: Wu Bo <[email protected]>
Signed-off-by: Mike Christie <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
When userspace restarts during boot or upgrades it won't know about the
offload driver's endpoint and connection mappings. iscsid will start by
cleaning up the old session by doing a stop_conn call. Later, if we are
able to create a new connection, we clean up the old endpoint during the
binding stage. The problem is that if we do stop_conn before doing the
ep_disconnect call offload, drivers can still be executing I/O. We then
might free tasks from the under the card/driver.
This moves the ep_disconnect call to before we do the stop_conn call for
this case. It will then work and look like a normal recovery/cleanup
procedure from the driver's point of view.
Link: https://lore.kernel.org/r/[email protected]
Tested-by: Manish Rangankar <[email protected]>
Reviewed-by: Lee Duncan <[email protected]>
Reviewed-by: Chris Leech <[email protected]>
Signed-off-by: Mike Christie <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
This patch moves iscsi_ep_disconnect() so it can be called earlier in the
next patch.
Link: https://lore.kernel.org/r/[email protected]
Tested-by: Manish Rangankar <[email protected]>
Reviewed-by: Lee Duncan <[email protected]>
Reviewed-by: Chris Leech <[email protected]>
Signed-off-by: Mike Christie <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Executing driver on servers with more than 32 CPUs were faced with command
timeouts. This is because we were not geting completions for commands
submitted on IQ32 - IQ63.
Set E64Q bit to enable upper inbound and outbound queues 32 to 63 in the
MPI main configuration table.
Added 500ms delay after successful MPI initialization as mentioned in
controller datasheet.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 05c6c029a44d ("scsi: pm80xx: Increase number of supported queues")
Reviewed-by: Damien Le Moal <[email protected]>
Acked-by: Jack Wang <[email protected]>
Signed-off-by: Ajish Koshy <[email protected]>
Signed-off-by: Viswas G <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
When upper inbound and outbound queues 32-63 are enabled, we see upper
vectors 32-63 in interrupt service routine. We need corresponding registers
to handle masking and unmasking of these upper interrupts.
To achieve this, we use registers MSGU_ODMR_U(0x34) to mask and
MSGU_ODMR_CLR_U(0x3C) to unmask the interrupts. In these registers bit 0-31
represents interrupt vectors 32-63.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 05c6c029a44d ("scsi: pm80xx: Increase number of supported queues")
Reviewed-by: John Garry <[email protected]>
Acked-by: Jack Wang <[email protected]>
Signed-off-by: Ajish Koshy <[email protected]>
Signed-off-by: Viswas G <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Revert the patch mentioned in the subject since it blocks I/O after module
unload has started while this is a legitimate use case. For e.g. blktests
test case srp/001 that patch causes a command timeout to be triggered for
the following call stack:
__schedule+0x4c3/0xd20
schedule+0x82/0x110
schedule_timeout+0x122/0x200
io_schedule_timeout+0x7b/0xc0
__wait_for_common+0x2bc/0x380
wait_for_completion_io_timeout+0x1d/0x20
blk_execute_rq+0x1db/0x200
__scsi_execute+0x1fb/0x310
sd_sync_cache+0x155/0x2c0 [sd_mod]
sd_shutdown+0xbb/0x190 [sd_mod]
sd_remove+0x5b/0x80 [sd_mod]
device_remove+0x9a/0xb0
device_release_driver_internal+0x2c5/0x360
device_release_driver+0x12/0x20
bus_remove_device+0x1aa/0x270
device_del+0x2d4/0x640
__scsi_remove_device+0x168/0x1a0
scsi_forget_host+0xa8/0xb0
scsi_remove_host+0x9b/0x150
sdebug_driver_remove+0x3d/0x140 [scsi_debug]
device_remove+0x6f/0xb0
device_release_driver_internal+0x2c5/0x360
device_release_driver+0x12/0x20
bus_remove_device+0x1aa/0x270
device_del+0x2d4/0x640
device_unregister+0x18/0x70
sdebug_do_remove_host+0x138/0x180 [scsi_debug]
scsi_debug_exit+0x45/0xd5 [scsi_debug]
__do_sys_delete_module.constprop.0+0x210/0x320
__x64_sys_delete_module+0x1f/0x30
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Link: https://lore.kernel.org/r/[email protected]
Fixes: 2aad3cd85370 ("scsi: scsi_debug: Address races following module load")
Cc: Douglas Gilbert <[email protected]>
Cc: Yi Zhang <[email protected]>
Cc: Bob Pearson <[email protected]>
Reported-by: Yi Zhang <[email protected]>
Tested-by: Yi Zhang <[email protected]>
Acked-by: Douglas Gilbert <[email protected]>
Signed-off-by: Bart Van Assche <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
When building with CONFIG_PM=y and CONFIG_PM_SLEEP=n (such as ARCH=riscv
allmodconfig), the following warnings/errors occur:
drivers/gpu/drm/msm/adreno/adreno_device.c:679:12: error: 'adreno_system_resume' defined but not used [-Werror=unused-function]
679 | static int adreno_system_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/msm/adreno/adreno_device.c:655:12: error: 'adreno_system_suspend' defined but not used [-Werror=unused-function]
655 | static int adreno_system_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
These functions are only used in SET_SYSTEM_SLEEP_PM_OPS(), which
evaluates to empty when CONFIG_PM_SLEEP is not set, making these
functions unused.
To resolve this, use the SYSTEM_SLEEP_PM_OPS() and RUNTIME_PM_OPS()
macros, which were introduced in commit 1a3c7bb08826 ("PM: core: Add new
*_PM_OPS macros, deprecate old ones"). They are designed to avoid these
compiler warnings while still guarding their use on
CONFIG_PM{,_SLEEP}=y.
Fixes: 7e4167c9e021 ("drm/msm/gpu: Park scheduler threads for system suspend")
Signed-off-by: Nathan Chancellor <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Clark <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-04-08
Alexander fixes a use after free issue with aRFS for ice driver.
Mateusz reverts a commit that introduced issues related to device
resets for iavf driver.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
Revert "iavf: Fix deadlock occurrence during resetting VF interface"
ice: arfs: fix use-after-free when freeing @rx_cpu_rmap
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Karsten Graul says:
====================
net/smc: fixes 2022-04-08
Patch 1 fixes two usages of snprintf() with non null-terminated
string which results into an out-of-bounds read.
Pach 2 fixes a syzbot finding where a pointer check was missed
before the call to dev_name().
Patch 3 fixes a crash when already released memory is used as
a function pointer.
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Child sockets may inherit the af_ops from the parent listen socket.
When the listen socket is released then the af_ops of the child socket
points to released memory.
Solve that by restoring the original af_ops for child sockets which
inherited the parent af_ops. And clear any inherited user_data of the
parent socket.
Fixes: 8270d9c21041 ("net/smc: Limit backlog connections")
Reviewed-by: Wenjia Zhang <[email protected]>
Signed-off-by: Karsten Graul <[email protected]>
Reviewed-by: D. Wythe <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
dev_name() was called with dev.parent as argument but without to
NULL-check it before.
Solve this by checking the pointer before the call to dev_name().
Fixes: af5f60c7e3d5 ("net/smc: allow PCI IDs as ib device names in the pnet table")
Reported-by: [email protected]
Signed-off-by: Karsten Graul <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Using snprintf() to convert not null-terminated strings to null
terminated strings may cause out of bounds read in the source string.
Therefore use memcpy() and terminate the target string with a null
afterwards.
Fixes: fa0866625543 ("net/smc: add support for user defined EIDs")
Fixes: 3c572145c24e ("net/smc: add generic netlink support for system EID")
Signed-off-by: Karsten Graul <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The function is not generally applicable enough to be included in the core
kernel header. Move it to block since it's the only subsystem using it.
Suggested-by: Linus Torvalds <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
commit 4298388574da ("net: macb: restart tx after tx used bit read")
added support for restarting transmission. Restarting tx does not work
in case controller asserts TXUBR interrupt and TQBP is already at the end
of the tx queue. In that situation, restarting tx will immediately cause
assertion of another TXUBR interrupt. The driver will end up in an infinite
interrupt loop which it cannot break out of.
For cases where TQBP is at the end of the tx queue, instead
only clear TX_USED interrupt. As more data gets pushed to the queue,
transmission will resume.
This issue was observed on a Xilinx Zynq-7000 based board.
During stress test of the network interface,
driver would get stuck on interrupt loop within seconds or minutes
causing CPU to stall.
Signed-off-by: Tomas Melin <[email protected]>
Tested-by: Claudiu Beznea <[email protected]>
Reviewed-by: Claudiu Beznea <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
There are two reasons why this isn't the best idea:
- It's an odd area to grab a bit of storage space, hence it's an odd area
to grab storage from.
- It puts the 3rd io_kiocb cacheline into the hot path, where normal hot
path just needs the first two.
Use 'cflags' for joint fd/cflags storage. We only need fd until we
successfully issue, and we only need cflags once a request is done and is
completed.
Fixes: 6bf9c47a3989 ("io_uring: defer file assignment")
Signed-off-by: Jens Axboe <[email protected]>
|
|
In preparation for fixing a regression with pulling in an extra cacheline
for IO that doesn't usually touch the last cacheline of the io_kiocb,
move the cached location of apoll->events to space shared with some other
completion data. Like cflags, this isn't used until after the request
has been completed, so we can piggy back on top of comp_list.
Fixes: 81459350d581 ("io_uring: cache req->apoll->events in req->cflags")
Signed-off-by: Jens Axboe <[email protected]>
|
|
-1 tells use to use the current position, but we check if the file is
a stream regardless of that. Fix up io_kiocb_update_pos() to only
dip into file if we need to. This is both more efficient and also drops
12 bytes of text on aarch64 and 64 bytes on x86-64.
Fixes: b4aec4001595 ("io_uring: do not recalculate ppos unnecessarily")
Signed-off-by: Jens Axboe <[email protected]>
|
|
The following WARN is triggered from kvm_vm_ioctl_set_clock():
WARNING: CPU: 10 PID: 579353 at arch/x86/kvm/../../../virt/kvm/kvm_main.c:3161 mark_page_dirty_in_slot+0x6c/0x80 [kvm]
...
CPU: 10 PID: 579353 Comm: qemu-system-x86 Tainted: G W O 5.16.0.stable #20
Hardware name: LENOVO 20UF001CUS/20UF001CUS, BIOS R1CET65W(1.34 ) 06/17/2021
RIP: 0010:mark_page_dirty_in_slot+0x6c/0x80 [kvm]
...
Call Trace:
<TASK>
? kvm_write_guest+0x114/0x120 [kvm]
kvm_hv_invalidate_tsc_page+0x9e/0xf0 [kvm]
kvm_arch_vm_ioctl+0xa26/0xc50 [kvm]
? schedule+0x4e/0xc0
? __cond_resched+0x1a/0x50
? futex_wait+0x166/0x250
? __send_signal+0x1f1/0x3d0
kvm_vm_ioctl+0x747/0xda0 [kvm]
...
The WARN was introduced by commit 03c0304a86bc ("KVM: Warn if
mark_page_dirty() is called without an active vCPU") but the change seems
to be correct (unlike Hyper-V TSC page update mechanism). In fact, there's
no real need to actually write to guest memory to invalidate TSC page, this
can be done by the first vCPU which goes through kvm_guest_time_update().
Reported-by: Maxim Levitsky <[email protected]>
Reported-by: Naresh Kamboju <[email protected]>
Suggested-by: Sean Christopherson <[email protected]>
Signed-off-by: Vitaly Kuznetsov <[email protected]>
Message-Id: <[email protected]>
|
|
Since current AVIC implementation cannot support encrypted memory,
inhibit AVIC for SEV-enabled guest.
Signed-off-by: Suravee Suthikulpanit <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
+new file mode 100644
+WARNING: Missing or malformed SPDX-License-Identifier tag in line 1
+#27: FILE: Documentation/virt/kvm/x86/errata.rst:1:
Opportunistically update all other non-added KVM documents and
remove a new extra blank line at EOF for x86/errata.rst.
Signed-off-by: Like Xu <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
The tsc_scaling_sync's binary should be present in the .gitignore
file for the git to ignore it.
Signed-off-by: Like Xu <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
into HEAD
KVM/riscv fixes for 5.18, take #1
- Remove hgatp zeroing in kvm_arch_vcpu_put()
- Fix alignment of the guest_hang() in KVM selftest
- Fix PTE A and D bits in KVM selftest
- Missing #include in vcpu_fp.c
|
|
There is possible circular locking dependency detected on event_mutex
(see below logs). This is due to set fail safe mode is done at
dp_panel_read_sink_caps() within event_mutex scope. To break this
possible circular locking, this patch move setting fail safe mode
out of event_mutex scope.
[ 23.958078] ======================================================
[ 23.964430] WARNING: possible circular locking dependency detected
[ 23.970777] 5.17.0-rc2-lockdep-00088-g05241de1f69e #148 Not tainted
[ 23.977219] ------------------------------------------------------
[ 23.983570] DrmThread/1574 is trying to acquire lock:
[ 23.988763] ffffff808423aab0 (&dp->event_mutex){+.+.}-{3:3}, at: msm_dp_displ ay_enable+0x58/0x164
[ 23.997895]
[ 23.997895] but task is already holding lock:
[ 24.003895] ffffff808420b280 (&kms->commit_lock[i]/1){+.+.}-{3:3}, at: lock_c rtcs+0x80/0x8c
[ 24.012495]
[ 24.012495] which lock already depends on the new lock.
[ 24.012495]
[ 24.020886]
[ 24.020886] the existing dependency chain (in reverse order) is:
[ 24.028570]
[ 24.028570] -> #5 (&kms->commit_lock[i]/1){+.+.}-{3:3}:
[ 24.035472] __mutex_lock+0xc8/0x384
[ 24.039695] mutex_lock_nested+0x54/0x74
[ 24.044272] lock_crtcs+0x80/0x8c
[ 24.048222] msm_atomic_commit_tail+0x1e8/0x3d0
[ 24.053413] commit_tail+0x7c/0xfc
[ 24.057452] drm_atomic_helper_commit+0x158/0x15c
[ 24.062826] drm_atomic_commit+0x60/0x74
[ 24.067403] drm_mode_atomic_ioctl+0x6b0/0x908
[ 24.072508] drm_ioctl_kernel+0xe8/0x168
[ 24.077086] drm_ioctl+0x320/0x370
[ 24.081123] drm_compat_ioctl+0x40/0xdc
[ 24.085602] __arm64_compat_sys_ioctl+0xe0/0x150
[ 24.090895] invoke_syscall+0x80/0x114
[ 24.095294] el0_svc_common.constprop.3+0xc4/0xf8
[ 24.100668] do_el0_svc_compat+0x2c/0x54
[ 24.105242] el0_svc_compat+0x4c/0xe4
[ 24.109548] el0t_32_sync_handler+0xc4/0xf4
[ 24.114381] el0t_32_sync+0x178
[ 24.118688]
[ 24.118688] -> #4 (&kms->commit_lock[i]){+.+.}-{3:3}:
[ 24.125408] __mutex_lock+0xc8/0x384
[ 24.129628] mutex_lock_nested+0x54/0x74
[ 24.134204] lock_crtcs+0x80/0x8c
[ 24.138155] msm_atomic_commit_tail+0x1e8/0x3d0
[ 24.143345] commit_tail+0x7c/0xfc
[ 24.147382] drm_atomic_helper_commit+0x158/0x15c
[ 24.152755] drm_atomic_commit+0x60/0x74
[ 24.157323] drm_atomic_helper_set_config+0x68/0x90
[ 24.162869] drm_mode_setcrtc+0x394/0x648
[ 24.167535] drm_ioctl_kernel+0xe8/0x168
[ 24.172102] drm_ioctl+0x320/0x370
[ 24.176135] drm_compat_ioctl+0x40/0xdc
[ 24.180621] __arm64_compat_sys_ioctl+0xe0/0x150
[ 24.185904] invoke_syscall+0x80/0x114
[ 24.190302] el0_svc_common.constprop.3+0xc4/0xf8
[ 24.195673] do_el0_svc_compat+0x2c/0x54
[ 24.200241] el0_svc_compat+0x4c/0xe4
[ 24.204544] el0t_32_sync_handler+0xc4/0xf4
[ 24.209378] el0t_32_sync+0x174/0x178
[ 24.213680] -> #3 (crtc_ww_class_mutex){+.+.}-{3:3}:
[ 24.220308] __ww_mutex_lock.constprop.20+0xe8/0x878
[ 24.225951] ww_mutex_lock+0x60/0xd0
[ 24.230166] modeset_lock+0x190/0x19c
[ 24.234467] drm_modeset_lock+0x34/0x54
[ 24.238953] drmm_mode_config_init+0x550/0x764
[ 24.244065] msm_drm_bind+0x170/0x59c
[ 24.248374] try_to_bring_up_master+0x244/0x294
[ 24.253572] __component_add+0xf4/0x14c
[ 24.258057] component_add+0x2c/0x38
[ 24.262273] dsi_dev_attach+0x2c/0x38
[ 24.266575] dsi_host_attach+0xc4/0x120
[ 24.271060] mipi_dsi_attach+0x34/0x48
[ 24.275456] devm_mipi_dsi_attach+0x28/0x68
[ 24.280298] ti_sn_bridge_probe+0x2b4/0x2dc
[ 24.285137] auxiliary_bus_probe+0x78/0x90
[ 24.289893] really_probe+0x1e4/0x3d8
[ 24.294194] __driver_probe_device+0x14c/0x164
[ 24.299298] driver_probe_device+0x54/0xf8
[ 24.304043] __device_attach_driver+0xb4/0x118
[ 24.309145] bus_for_each_drv+0xb0/0xd4
[ 24.313628] __device_attach+0xcc/0x158
[ 24.318112] device_initial_probe+0x24/0x30
[ 24.322954] bus_probe_device+0x38/0x9c
[ 24.327439] deferred_probe_work_func+0xd4/0xf0
[ 24.332628] process_one_work+0x2f0/0x498
[ 24.337289] process_scheduled_works+0x44/0x48
[ 24.342391] worker_thread+0x1e4/0x26c
[ 24.346788] kthread+0xe4/0xf4
[ 24.350470] ret_from_fork+0x10/0x20
[ 24.354683]
[ 24.354683]
[ 24.354683] -> #2 (crtc_ww_class_acquire){+.+.}-{0:0}:
[ 24.361489] drm_modeset_acquire_init+0xe4/0x138
[ 24.366777] drm_helper_probe_detect_ctx+0x44/0x114
[ 24.372327] check_connector_changed+0xbc/0x198
[ 24.377517] drm_helper_hpd_irq_event+0xcc/0x11c
[ 24.382804] dsi_hpd_worker+0x24/0x30
[ 24.387104] process_one_work+0x2f0/0x498
[ 24.391762] worker_thread+0x1d0/0x26c
[ 24.396158] kthread+0xe4/0xf4
[ 24.399840] ret_from_fork+0x10/0x20
[ 24.404053]
[ 24.404053] -> #1 (&dev->mode_config.mutex){+.+.}-{3:3}:
[ 24.411032] __mutex_lock+0xc8/0x384
[ 24.415247] mutex_lock_nested+0x54/0x74
[ 24.419819] dp_panel_read_sink_caps+0x23c/0x26c
[ 24.425108] dp_display_process_hpd_high+0x34/0xd4
[ 24.430570] dp_display_usbpd_configure_cb+0x30/0x3c
[ 24.436205] hpd_event_thread+0x2ac/0x550
[ 24.440864] kthread+0xe4/0xf4
[ 24.444544] ret_from_fork+0x10/0x20
[ 24.448757]
[ 24.448757] -> #0 (&dp->event_mutex){+.+.}-{3:3}:
[ 24.455116] __lock_acquire+0xe2c/0x10d8
[ 24.459690] lock_acquire+0x1ac/0x2d0
[ 24.463988] __mutex_lock+0xc8/0x384
[ 24.468201] mutex_lock_nested+0x54/0x74
[ 24.472773] msm_dp_display_enable+0x58/0x164
[ 24.477789] dp_bridge_enable+0x24/0x30
[ 24.482273] drm_atomic_bridge_chain_enable+0x78/0x9c
[ 24.488006] drm_atomic_helper_commit_modeset_enables+0x1bc/0x244
[ 24.494801] msm_atomic_commit_tail+0x248/0x3d0
[ 24.499992] commit_tail+0x7c/0xfc
[ 24.504031] drm_atomic_helper_commit+0x158/0x15c
[ 24.509404] drm_atomic_commit+0x60/0x74
[ 24.513976] drm_mode_atomic_ioctl+0x6b0/0x908
[ 24.519079] drm_ioctl_kernel+0xe8/0x168
[ 24.523650] drm_ioctl+0x320/0x370
[ 24.527689] drm_compat_ioctl+0x40/0xdc
[ 24.532175] __arm64_compat_sys_ioctl+0xe0/0x150
[ 24.537463] invoke_syscall+0x80/0x114
[ 24.541861] el0_svc_common.constprop.3+0xc4/0xf8
[ 24.547235] do_el0_svc_compat+0x2c/0x54
[ 24.551806] el0_svc_compat+0x4c/0xe4
[ 24.556106] el0t_32_sync_handler+0xc4/0xf4
[ 24.560948] el0t_32_sync+0x174/0x178
Changes in v2:
-- add circular lockiing trace
Fixes: d4aca422539c ("drm/msm/dp: always add fail-safe mode into connector mode list")
Signed-off-by: Kuogee Hsieh <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/481396/
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Rob Clark <[email protected]>
|
|
The member 'msm_dsi->connector' isn't assigned until
msm_dsi_manager_connector_init() returns (see msm_dsi_modeset_init() and
how it assigns the return value). Therefore this pointer is going to be
NULL here. Let's use 'connector' which is what was intended.
Cc: Dmitry Baryshkov <[email protected]>
Cc: Sean Paul <[email protected]>
Fixes: 6d5e78406991 ("drm/msm/dsi: Move dsi panel init into modeset init path")
Signed-off-by: Stephen Boyd <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/478693/
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Rob Clark <[email protected]>
|
|
Even if some IOMMU has registered itself on the platform "bus", that
doesn't necessarily mean it provides translation for the device we
care about. Replace iommu_present() with a more appropriate check.
Signed-off-by: Robin Murphy <[email protected]>
Reviewed-by: Rob Clark <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/480707/
Link: https://lore.kernel.org/r/5ab4f4574d7f3e042261da702d493ee40d003356.1649168268.git.robin.murphy@arm.com
Signed-off-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Rob Clark <[email protected]>
|