aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-09-03selftests/x86/test_vsyscall: Improve the process_vm_readv() testAndy Lutomirski1-2/+20
The existing code accepted process_vm_readv() success or failure as long as it didn't return garbage. This is too weak: if the vsyscall page is readable, then process_vm_readv() should succeed and, if the page is not readable, then it should fail. Signed-off-by: Andy Lutomirski <[email protected]> Signed-off-by: Dave Hansen <[email protected]> Cc: [email protected] Cc: Peter Zijlstra <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Jann Horn <[email protected]> Cc: John Hubbard <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Kirill A. Shutemov <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2020-09-03mm: fix pin vs. gup mismatch with gate pagesDave Hansen1-1/+1
Gate pages were missed when converting from get to pin_user_pages(). This can lead to refcount imbalances. This is reliably and quickly reproducible running the x86 selftests when vsyscall=emulate is enabled (the default). Fix by using try_grab_page() with appropriate flags passed. The long story: Today, pin_user_pages() and get_user_pages() are similar interfaces for manipulating page reference counts. However, "pins" use a "bias" value and manipulate the actual reference count by 1024 instead of 1 used by plain "gets". That means that pin_user_pages() must be matched with unpin_user_pages() and can't be mixed with a plain put_user_pages() or put_page(). Enter gate pages, like the vsyscall page. They are pages usually in the kernel image, but which are mapped to userspace. Userspace is allowed access to them, including interfaces using get/pin_user_pages(). The refcount of these kernel pages is manipulated just like a normal user page on the get/pin side so that the put/unpin side can work the same for normal user pages or gate pages. get_gate_page() uses try_get_page() which only bumps the refcount by 1, not 1024, even if called in the pin_user_pages() path. If someone pins a gate page, this happens: pin_user_pages() get_gate_page() try_get_page() // bump refcount +1 ... some time later unpin_user_pages() page_ref_sub_and_test(page, 1024)) ... and boom, we get a refcount off by 1023. This is reliably and quickly reproducible running the x86 selftests when booted with vsyscall=emulate (the default). The selftests use ptrace(), but I suspect anything using pin_user_pages() on gate pages could hit this. To fix it, simply use try_grab_page() instead of try_get_page(), and pass 'gup_flags' in so that FOLL_PIN can be respected. This bug traces back to the very beginning of the FOLL_PIN support in commit 3faa52c03f44 ("mm/gup: track FOLL_PIN pages"), which showed up in the 5.7 release. Signed-off-by: Dave Hansen <[email protected]> Fixes: 3faa52c03f44 ("mm/gup: track FOLL_PIN pages") Reported-by: Peter Zijlstra <[email protected]> Reviewed-by: John Hubbard <[email protected]> Acked-by: Andy Lutomirski <[email protected]> Cc: [email protected] Cc: Jann Horn <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Kirill A. Shutemov <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2020-09-04Merge branch 'linux-5.9' of git://github.com/skeggsb/linux into drm-fixesDave Airlie4-3/+12
A couple of minor fixes to the display changes that went in for 5.9. The most important of which is a workaround for a HW bug that was exposed by better push buffer space management, leading to random(ish...) display engine hangs. Signed-off-by: Dave Airlie <[email protected]> From: Ben Skeggs <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/ <CACAvsv5QDxyMihrxbPk+-sORnaYtjR6_dbM68gEhb2wxht_G1w@mail.gmail.com
2020-09-04Merge tag 'drm-intel-fixes-2020-09-03' of ↵Dave Airlie3-8/+31
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.9-rc4: - Clang build warning fix - HDCP fixes Signed-off-by: Dave Airlie <[email protected]> From: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-09-04Merge tag 'amd-drm-fixes-5.9-2020-09-03' of ↵Dave Airlie7-14/+41
git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.9-2020-09-03: amdgpu: - Fix for 32bit systems - SW CTF fix - Update for Sienna Cichlid - CIK bug fixes radeon: - PLL fix Signed-off-by: Dave Airlie <[email protected]> From: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-09-03Merge branch 'smc-fixes'David S. Miller3-8/+25
Karsten Graul says: ==================== net/smc: fixes 2020-09-03 Please apply the following patch series for smc to netdev's net tree. Patch 1 fixes the toleration of older SMC implementations. Patch 2 takes care of a problem that happens when SMCR is used after SMCD initialization failed. Patch 3 fixes a problem with freed send buffers, and patch 4 corrects refcounting when SMC terminates due to device removal. ==================== Signed-off-by: David S. Miller <[email protected]>
2020-09-03net/smc: fix sock refcounting in case of terminationUrsula Braun1-7/+8
When an ISM device is removed, all its linkgroups are terminated, i.e. all the corresponding connections are killed. Connection killing invokes smc_close_active_abort(), which decreases the sock refcount for certain states to simulate passive closing. And it cancels the close worker and has to give up the sock lock for this timeframe. This opens the door for a passive close worker or a socket close to run in between. In this case smc_close_active_abort() and passive close worker resp. smc_release() might do a sock_put for passive closing. This causes: [ 1323.315943] refcount_t: underflow; use-after-free. [ 1323.316055] WARNING: CPU: 3 PID: 54469 at lib/refcount.c:28 refcount_warn_saturate+0xe8/0x130 [ 1323.316069] Kernel panic - not syncing: panic_on_warn set ... [ 1323.316084] CPU: 3 PID: 54469 Comm: uperf Not tainted 5.9.0-20200826.rc2.git0.46328853ed20.300.fc32.s390x+debug #1 [ 1323.316096] Hardware name: IBM 2964 NC9 702 (z/VM 6.4.0) [ 1323.316108] Call Trace: [ 1323.316125] [<00000000c0d4aae8>] show_stack+0x90/0xf8 [ 1323.316143] [<00000000c15989b0>] dump_stack+0xa8/0xe8 [ 1323.316158] [<00000000c0d8344e>] panic+0x11e/0x288 [ 1323.316173] [<00000000c0d83144>] __warn+0xac/0x158 [ 1323.316187] [<00000000c1597a7a>] report_bug+0xb2/0x130 [ 1323.316201] [<00000000c0d36424>] monitor_event_exception+0x44/0xc0 [ 1323.316219] [<00000000c195c716>] pgm_check_handler+0x1da/0x238 [ 1323.316234] [<00000000c151844c>] refcount_warn_saturate+0xec/0x130 [ 1323.316280] ([<00000000c1518448>] refcount_warn_saturate+0xe8/0x130) [ 1323.316310] [<000003ff801f2e2a>] smc_release+0x192/0x1c8 [smc] [ 1323.316323] [<00000000c169f1fa>] __sock_release+0x5a/0xe0 [ 1323.316334] [<00000000c169f2ac>] sock_close+0x2c/0x40 [ 1323.316350] [<00000000c1086de0>] __fput+0xb8/0x278 [ 1323.316362] [<00000000c0db1e0e>] task_work_run+0x76/0xb8 [ 1323.316393] [<00000000c0d8ab84>] do_exit+0x26c/0x520 [ 1323.316408] [<00000000c0d8af08>] do_group_exit+0x48/0xc0 [ 1323.316421] [<00000000c0d8afa8>] __s390x_sys_exit_group+0x28/0x38 [ 1323.316433] [<00000000c195c32c>] system_call+0xe0/0x2b4 [ 1323.316446] 1 lock held by uperf/54469: [ 1323.316456] #0: 0000000044125e60 (&sb->s_type->i_mutex_key#9){+.+.}-{3:3}, at: __sock_release+0x44/0xe0 The patch rechecks sock state in smc_close_active_abort() after smc_close_cancel_work() to avoid duplicate decrease of sock refcount for the same purpose. Fixes: 611b63a12732 ("net/smc: cancel tx worker in case of socket aborts") Reviewed-by: Karsten Graul <[email protected]> Signed-off-by: Ursula Braun <[email protected]> Signed-off-by: Karsten Graul <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-03net/smc: reset sndbuf_desc if freedUrsula Braun1-0/+1
When an SMC connection is created, and there is a problem to create an RMB or DMB, the previously created send buffer is thrown away as well including buffer descriptor freeing. Make sure the connection no longer references the freed buffer descriptor, otherwise bugs like this are possible: [71556.835148] ============================================================================= [71556.835168] BUG kmalloc-128 (Tainted: G B OE ): Poison overwritten [71556.835172] ----------------------------------------------------------------------------- [71556.835179] INFO: 0x00000000d20894be-0x00000000aaef63e9 @offset=2724. First byte 0x0 instead of 0x6b [71556.835215] INFO: Allocated in __smc_buf_create+0x184/0x578 [smc] age=0 cpu=5 pid=46726 [71556.835234] ___slab_alloc+0x5a4/0x690 [71556.835239] __slab_alloc.constprop.0+0x70/0xb0 [71556.835243] kmem_cache_alloc_trace+0x38e/0x3f8 [71556.835250] __smc_buf_create+0x184/0x578 [smc] [71556.835257] smc_buf_create+0x2e/0xe8 [smc] [71556.835264] smc_listen_work+0x516/0x6a0 [smc] [71556.835275] process_one_work+0x280/0x478 [71556.835280] worker_thread+0x66/0x368 [71556.835287] kthread+0x17a/0x1a0 [71556.835294] ret_from_fork+0x28/0x2c [71556.835301] INFO: Freed in smc_buf_create+0xd8/0xe8 [smc] age=0 cpu=5 pid=46726 [71556.835307] __slab_free+0x246/0x560 [71556.835311] kfree+0x398/0x3f8 [71556.835318] smc_buf_create+0xd8/0xe8 [smc] [71556.835324] smc_listen_work+0x516/0x6a0 [smc] [71556.835328] process_one_work+0x280/0x478 [71556.835332] worker_thread+0x66/0x368 [71556.835337] kthread+0x17a/0x1a0 [71556.835344] ret_from_fork+0x28/0x2c [71556.835348] INFO: Slab 0x00000000a0744551 objects=51 used=51 fp=0x0000000000000000 flags=0x1ffff00000010200 [71556.835352] INFO: Object 0x00000000563480a1 @offset=2688 fp=0x00000000289567b2 [71556.835359] Redzone 000000006783cde2: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835363] Redzone 00000000e35b876e: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835367] Redzone 0000000023074562: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835372] Redzone 00000000b9564b8c: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835376] Redzone 00000000810c6362: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835380] Redzone 0000000065ef52c3: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835384] Redzone 00000000c5dd6984: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835388] Redzone 000000004c480f8f: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835392] Object 00000000563480a1: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [71556.835397] Object 000000009c479d06: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [71556.835401] Object 000000006e1dce92: 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b 6b 6b 6b 6b kkkk....kkkkkkkk [71556.835405] Object 00000000227f7cf8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [71556.835410] Object 000000009a701215: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [71556.835414] Object 000000003731ce76: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [71556.835418] Object 00000000f7085967: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [71556.835422] Object 0000000007f99927: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 kkkkkkkkkkkkkkk. [71556.835427] Redzone 00000000579c4913: bb bb bb bb bb bb bb bb ........ [71556.835431] Padding 00000000305aef82: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ [71556.835435] Padding 00000000b1cdd722: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ [71556.835438] Padding 00000000c7568199: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ [71556.835442] Padding 00000000fad4c4d4: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ [71556.835451] CPU: 0 PID: 47939 Comm: kworker/0:15 Tainted: G B OE 5.9.0-rc1uschi+ #54 [71556.835456] Hardware name: IBM 3906 M03 703 (LPAR) [71556.835464] Workqueue: events smc_listen_work [smc] [71556.835470] Call Trace: [71556.835478] [<00000000d5eaeb10>] show_stack+0x90/0xf8 [71556.835493] [<00000000d66fc0f8>] dump_stack+0xa8/0xe8 [71556.835499] [<00000000d61a511c>] check_bytes_and_report+0x104/0x130 [71556.835504] [<00000000d61a57b2>] check_object+0x26a/0x2e0 [71556.835509] [<00000000d61a59bc>] alloc_debug_processing+0x194/0x238 [71556.835514] [<00000000d61a8c14>] ___slab_alloc+0x5a4/0x690 [71556.835519] [<00000000d61a9170>] __slab_alloc.constprop.0+0x70/0xb0 [71556.835524] [<00000000d61aaf66>] kmem_cache_alloc_trace+0x38e/0x3f8 [71556.835530] [<000003ff80549bbc>] __smc_buf_create+0x184/0x578 [smc] [71556.835538] [<000003ff8054a396>] smc_buf_create+0x2e/0xe8 [smc] [71556.835545] [<000003ff80540c16>] smc_listen_work+0x516/0x6a0 [smc] [71556.835549] [<00000000d5f0f448>] process_one_work+0x280/0x478 [71556.835554] [<00000000d5f0f6a6>] worker_thread+0x66/0x368 [71556.835559] [<00000000d5f18692>] kthread+0x17a/0x1a0 [71556.835563] [<00000000d6abf3b8>] ret_from_fork+0x28/0x2c [71556.835569] INFO: lockdep is turned off. [71556.835573] FIX kmalloc-128: Restoring 0x00000000d20894be-0x00000000aaef63e9=0x6b [71556.835577] FIX kmalloc-128: Marking all objects used Fixes: fd7f3a746582 ("net/smc: remove freed buffer from list") Reviewed-by: Karsten Graul <[email protected]> Signed-off-by: Ursula Braun <[email protected]> Signed-off-by: Karsten Graul <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-03net/smc: set rx_off for SMCR explicitlyUrsula Braun1-0/+2
SMC tries to make use of SMCD first. If a problem shows up, it tries to switch to SMCR. If the SMCD initializing problem shows up after the SMCD connection has already been initialized, field rx_off keeps the wrong SMCD value for SMCR, which results in corrupted data at the receiver. This patch adds an explicit (re-)setting of field rx_off to zero if the connection uses SMCR. Fixes: be244f28d22f ("net/smc: add SMC-D support in data transfer") Reviewed-by: Karsten Graul <[email protected]> Signed-off-by: Ursula Braun <[email protected]> Signed-off-by: Karsten Graul <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-03net/smc: fix toleration of fake add_link messagesKarsten Graul1-1/+14
Older SMCR implementations had no link failover support and used one link only. Because the handshake protocol requires to try the establishment of a second link the old code sent a fake add_link message and declined any server response afterwards. The current code supports multiple links and inspects the received fake add_link message more closely. To tolerate the fake add_link messages smc_llc_is_local_add_link() needs an improved check of the message to be able to separate between locally enqueued and fake add_link messages. And smc_llc_cli_add_link() needs to check if the provided qp_mtu size is invalid and reject the add_link request in that case. Fixes: c48254fa48e5 ("net/smc: move add link processing for new device into llc layer") Reviewed-by: Ursula Braun <[email protected]> Signed-off-by: Karsten Graul <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-03tg3: Fix soft lockup when tg3_reset_task() fails.Michael Chan1-4/+13
If tg3_reset_task() fails, the device state is left in an inconsistent state with IFF_RUNNING still set but NAPI state not enabled. A subsequent operation, such as ifdown or AER error can cause it to soft lock up when it tries to disable NAPI state. Fix it by bringing down the device to !IFF_RUNNING state when tg3_reset_task() fails. tg3_reset_task() running from workqueue will now call tg3_close() when the reset fails. We need to modify tg3_reset_task_cancel() slightly to avoid tg3_close() calling cancel_work_sync() to cancel tg3_reset_task(). Otherwise cancel_work_sync() will wait forever for tg3_reset_task() to finish. Reported-by: David Christensen <[email protected]> Reported-by: Baptiste Covolato <[email protected]> Fixes: db2199737990 ("tg3: Schedule at most one tg3_reset_task run") Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-03perf tools: Add bpf image check to __map__is_kmoduleJiri Olsa3-7/+24
When validating kcore modules the do_validate_kcore_modules function checks on every kernel module dso against modules record. The __map__is_kmodule check is used to get only kernel module dso objects through. Currently the bpf images are slipping through the check and making the validation to fail, so report falls back from kcore usage to kallsyms. Adding __map__is_bpf_image check for bpf image and adding it to __map__is_kmodule check. Fixes: 3c29d4483e85 ("perf annotate: Add basic support for bpf_image") Signed-off-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-09-03perf record/stat: Explicitly call out event modifiers in the documentationKim Phillips2-0/+8
Event modifiers are not mentioned in the perf record or perf stat manpages. Add them to orient new users more effectively by pointing them to the perf list manpage for details. Fixes: 2055fdaf8703 ("perf list: Document precise event sampling for AMD IBS") Signed-off-by: Kim Phillips <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexey Budankov <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Paul Clarke <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Tony Jones <[email protected]> Cc: [email protected] Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-09-03perf bench: The do_run_multi_threaded() function must use ↵YueHaibing1-2/+2
IS_ERR(perf_session__new()) In case of error, the function perf_session__new() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR() Committer notes: This wasn't compiling due to an extraneous '{' not matched by a '}', fix it. Fixes: 13edc237200c ("perf bench: Add a multi-threaded synthesize benchmark") Signed-off-by: YueHaibing <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-09-03perf stat: Turn off summary for interval mode by defaultJin Yao3-3/+9
There's a risk that outputting interval mode summaries by default breaks CSV consumers. It already broke pmu-tools/toplev. So now we turn off the summary by default but we create a new option '--summary' to enable the summary. This is active even when not using CSV mode. Before: root@kbl-ppc:~# perf stat -I1000 --interval-count 2 # time counts unit events 1.000265904 8,005.73 msec cpu-clock # 8.006 CPUs utilized 1.000265904 601 context-switches # 0.075 K/sec 1.000265904 10 cpu-migrations # 0.001 K/sec 1.000265904 0 page-faults # 0.000 K/sec 1.000265904 66,746,521 cycles # 0.008 GHz 1.000265904 71,874,398 instructions # 1.08 insn per cycle 1.000265904 13,356,781 branches # 1.668 M/sec 1.000265904 298,756 branch-misses # 2.24% of all branches 2.001857667 8,012.52 msec cpu-clock # 8.013 CPUs utilized 2.001857667 164 context-switches # 0.020 K/sec 2.001857667 10 cpu-migrations # 0.001 K/sec 2.001857667 2 page-faults # 0.000 K/sec 2.001857667 5,822,188 cycles # 0.001 GHz 2.001857667 2,186,170 instructions # 0.38 insn per cycle 2.001857667 442,378 branches # 0.055 M/sec 2.001857667 44,750 branch-misses # 10.12% of all branches Performance counter stats for 'system wide': 16,018.25 msec cpu-clock # 7.993 CPUs utilized 765 context-switches # 0.048 K/sec 20 cpu-migrations # 0.001 K/sec 2 page-faults # 0.000 K/sec 72,568,709 cycles # 0.005 GHz 74,060,568 instructions # 1.02 insn per cycle 13,799,159 branches # 0.861 M/sec 343,506 branch-misses # 2.49% of all branches 2.004118489 seconds time elapsed After: root@kbl-ppc:~# perf stat -I1000 --interval-count 2 # time counts unit events 1.001336393 8,013.28 msec cpu-clock # 8.013 CPUs utilized 1.001336393 82 context-switches # 0.010 K/sec 1.001336393 8 cpu-migrations # 0.001 K/sec 1.001336393 0 page-faults # 0.000 K/sec 1.001336393 4,199,121 cycles # 0.001 GHz 1.001336393 1,373,991 instructions # 0.33 insn per cycle 1.001336393 270,681 branches # 0.034 M/sec 1.001336393 31,659 branch-misses # 11.70% of all branches 2.003905006 8,020.52 msec cpu-clock # 8.021 CPUs utilized 2.003905006 184 context-switches # 0.023 K/sec 2.003905006 8 cpu-migrations # 0.001 K/sec 2.003905006 2 page-faults # 0.000 K/sec 2.003905006 5,446,190 cycles # 0.001 GHz 2.003905006 2,312,547 instructions # 0.42 insn per cycle 2.003905006 451,691 branches # 0.056 M/sec 2.003905006 37,925 branch-misses # 8.40% of all branches root@kbl-ppc:~# perf stat -I1000 --interval-count 2 --summary # time counts unit events 1.001313128 8,013.20 msec cpu-clock # 8.013 CPUs utilized 1.001313128 83 context-switches # 0.010 K/sec 1.001313128 8 cpu-migrations # 0.001 K/sec 1.001313128 0 page-faults # 0.000 K/sec 1.001313128 4,470,950 cycles # 0.001 GHz 1.001313128 1,440,045 instructions # 0.32 insn per cycle 1.001313128 283,222 branches # 0.035 M/sec 1.001313128 33,576 branch-misses # 11.86% of all branches 2.003857385 8,020.34 msec cpu-clock # 8.020 CPUs utilized 2.003857385 154 context-switches # 0.019 K/sec 2.003857385 8 cpu-migrations # 0.001 K/sec 2.003857385 2 page-faults # 0.000 K/sec 2.003857385 4,515,676 cycles # 0.001 GHz 2.003857385 2,180,449 instructions # 0.48 insn per cycle 2.003857385 435,254 branches # 0.054 M/sec 2.003857385 31,179 branch-misses # 7.16% of all branches Performance counter stats for 'system wide': 16,033.53 msec cpu-clock # 7.992 CPUs utilized 237 context-switches # 0.015 K/sec 16 cpu-migrations # 0.001 K/sec 2 page-faults # 0.000 K/sec 8,986,626 cycles # 0.001 GHz 3,620,494 instructions # 0.40 insn per cycle 718,476 branches # 0.045 M/sec 64,755 branch-misses # 9.01% of all branches 2.006124542 seconds time elapsed Fixes: c7e5b328a8d4 ("perf stat: Report summary for interval mode") Signed-off-by: Jin Yao <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-09-03libtraceevent: Fix build warning on 32-bit archesTzvetomir Stoyanov (VMware)1-1/+1
Fixed a compilation warning for casting to pointer from integer of different size on 32-bit platforms. Reported-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Tzvetomir Stoyanov (VMware) <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]> Cc: [email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-09-03perf jevents: Fix suspicious code in fixregex()Namhyung Kim1-1/+1
The new string should have enough space for the original string and the back slashes IMHO. Fixes: fbc2844e84038ce3 ("perf vendor events: Use more flexible pattern matching for CPU identification for mapfile.csv") Signed-off-by: Namhyung Kim <[email protected]> Reviewed-by: Ian Rogers <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: William Cohen <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-09-03perf parse-events: Use uintptr_t when casting numbers to pointersArnaldo Carvalho de Melo1-4/+4
To address these errors found when cross building from x86_64 to MIPS little endian 32-bit: CC /tmp/build/perf/util/parse-events-bison.o util/parse-events.y: In function 'parse_events_parse': util/parse-events.y:514:6: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] 514 | (void *) $2, $6, $4); | ^ util/parse-events.y:531:7: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] 531 | (void *) $2, NULL, $4)) { | ^ util/parse-events.y:547:6: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] 547 | (void *) $2, $4, 0); | ^ util/parse-events.y:564:7: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] 564 | (void *) $2, NULL, 0)) { | ^ Fixes: cabbf26821aa210f ("perf parse: Before yyabort-ing free components") Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Martin KaFai Lau <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Yonghong Song <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-09-03doc: net: dsa: Fix typo in config code samplePaul Barker1-1/+1
In the "single port" example code for configuring a DSA switch without tagging support from userspace the command to bring up the "lan2" link was typo'd. Signed-off-by: Paul Barker <[email protected]> Acked-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-03Merge tag 'fixes-2020-09-03' of ↵Linus Torvalds2-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock Pull misc build failure fixes from Mike Rapoport: "Fix min_low_pfn/max_low_pfn build errors on ia64 and microblaze. Some configurations of ia64 and microblaze use min_low_pfn and max_low_pfn in pfn_valid(). This causes build failures for modules that use pfn_valid(). The fix is to add EXPORT_SYMBOL() for these variables on ia64 and microblaze" * tag 'fixes-2020-09-03' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: ia64: fix min_low_pfn/max_low_pfn build errors microblaze: fix min_low_pfn/max_low_pfn build errors
2020-09-03Merge tag 'affs-for-5.9-tag' of ↵Linus Torvalds3-7/+62
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull affs fix from David Sterba: "One fix to make permissions work the same way as on AmigaOS" * tag 'affs-for-5.9-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: affs: fix basic permission bits to actually work
2020-09-03Merge tag 'media/v5.9-2' of ↵Linus Torvalds8-55/+71
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - a compilation fix issue with ti-vpe on arm 32 bits - two Kconfig fixes for imx214 and max9286 drivers - a kernel information leak at v4l2-core on time32 compat ioctls - some fixes at rc core unbind logic - a fix at mceusb driver for it to not use GFP_ATOMIC - fixes at cedrus and vicodec drivers at the control handling logic - a fix at gpio-ir-tx to avoid disabling interruts on a spinlock * tag 'media/v5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: mceusb: Avoid GFP_ATOMIC where it is not needed media: gpio-ir-tx: spinlock is not needed to disable interrupts media: rc: do not access device via sysfs after rc_unregister_device() media: rc: uevent sysfs file races with rc_unregister_device() media: max9286: Depend on OF_GPIO media: i2c: imx214: select V4L2_FWNODE media: cedrus: Add missing v4l2_ctrl_request_hdl_put() media: vicodec: add missing v4l2_ctrl_request_hdl_put() media: media/v4l2-core: Fix kernel-infoleak in video_put_user() media: ti-vpe: cal: Fix compilation on 32-bit ARM
2020-09-03ALSA: hda/realtek - Improved routing for Thinkpad X1 7th/8th GenTakashi Iwai1-1/+41
There've been quite a few regression reports about the lowered volume (reduced to ca 65% from the previous level) on Lenovo Thinkpad X1 after the commit d2cd795c4ece ("ALSA: hda - fixup for the bass speaker on Lenovo Carbon X1 7th gen"). Although the commit itself does the right thing from HD-audio POV in order to have a volume control for bass speakers, it seems that the machine has some secret recipe under the hood. Through experiments, Benjamin Poirier found out that the following routing gives the best result: * DAC1 (NID 0x02) -> Speaker pin (NID 0x14) * DAC2 (NID 0x03) -> Shared by both Bass Speaker pin (NID 0x17) & Headphone pin (0x21) * DAC3 (NID 0x06) -> Unused DAC1 seems to have some equalizer internally applied, and you'd get again the output in a bad quality if you connect this to the headphone pin. Hence the headphone is connected to DAC2, which is now shared with the bass speaker pin. DAC3 has no volume amp, hence it's not connected at all. For achieving the routing above, this patch introduced a couple of workarounds: * The connection list of bass speaker pin (NID 0x17) is reduced not to include DAC3 (NID 0x06) * Pass preferred_pairs array to specify the fixed connection Here, both workarounds are needed because the generic parser prefers the individual DAC assignment over others. When the routing above is applied, the generic parser creates the two volume controls "Front" and "Bass Speaker". Since we have only two DACs for three output pins, those are not fully controlling each output individually, and it would confuse PulseAudio. For avoiding the pitfall, in this patch, we rename those volume controls to some unique ones ("DAC1" and "DAC2"). Then PulseAudio ignore them and concentrate only on the still good-working "Master" volume control. If a user still wants to control each DAC volume, they can still change manually via "DAC1" and "DAC2" volume controls. Fixes: d2cd795c4ece ("ALSA: hda - fixup for the bass speaker on Lenovo Carbon X1 7th gen") Reported-by: Benjamin Poirier <[email protected]> Reviewed-by: Jaroslav Kysela <[email protected]> Tested-by: Benjamin Poirier <[email protected]> Cc: <[email protected]> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207407#c10 BugLink: https://gist.github.com/hamidzr/dd81e429dc86f4327ded7a2030e7d7d9#gistcomment-3214171 BugLink: https://gist.github.com/hamidzr/dd81e429dc86f4327ded7a2030e7d7d9#gistcomment-3276276 Link: https://lore/kernel.org/r/[email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2020-09-03MIPS: SNI: Fix SCSI interruptThomas Bogendoerfer1-2/+2
On RM400(a20r) machines ISA and SCSI interrupts share the same interrupt line. Commit 49e6e07e3c80 ("MIPS: pass non-NULL dev_id on shared request_irq()") accidently dropped the IRQF_SHARED bit, which breaks registering SCSI interrupt. Put back IRQF_SHARED and add dev_id for ISA interrupt. Fixes: 49e6e07e3c80 ("MIPS: pass non-NULL dev_id on shared request_irq()") Signed-off-by: Thomas Bogendoerfer <[email protected]>
2020-09-03MIPS: add missing MSACSR and upper MSA initializationHuang Pei1-0/+12
In cc97ab235f3f ("MIPS: Simplify FP context initialization), init_fp_ctx just initialize the fp/msa context, and own_fp_inatomic just restore FCSR and 64bit FP regs from it, but miss MSACSR and upper MSA regs for MSA, so MSACSR and MSA upper regs's value from previous task on current cpu can leak into current task and cause unpredictable behavior when MSA context not initialized. Fixes: cc97ab235f3f ("MIPS: Simplify FP context initialization") Signed-off-by: Huang Pei <[email protected]> Signed-off-by: Thomas Bogendoerfer <[email protected]>
2020-09-03dmaengine: ti: k3-udma: Update rchan_oes_offset for am654 SYSFW ABI 3.0Peter Ujfalusi1-2/+2
SYSFW ABI 3.0 has changed the rchan_oes_offset value for am654 to support SR2. Since the kernel now needs SYSFW API 3.0 to work because the merged irqchip update, we need to also update the am654 rchan_oes_offset. Signed-off-by: Peter Ujfalusi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2020-09-03drm/nouveau/kms/nv50-gp1xx: add WAR for EVO push buffer HW bugBen Skeggs1-0/+6
Thanks to NVIDIA for confirming this workaround, and clarifying which HW is affected. Signed-off-by: Ben Skeggs <[email protected]> Tested-by: Alexander Kapshuk <[email protected]>
2020-09-03drm/nouveau/kms/nv50-gp1xx: disable notifies again after core updateBen Skeggs1-1/+4
This was lost during the header conversion. Signed-off-by: Ben Skeggs <[email protected]>
2020-09-03drm/nouveau/kms/nv50-: add some whitespace before debug messageBen Skeggs1-1/+1
Signed-off-by: Ben Skeggs <[email protected]>
2020-09-03drm/nouveau/kms/gv100-: Include correct push header in crcc37d.cLyude Paul1-1/+1
Looks like when we converted everything over to Nvidia's class headers, we mistakenly included the nvif/push507b.h instead of nvif/pushc37b.h, which resulted in breaking CRC reporting for volta+: nouveau 0000:1f:00.0: disp: chid 0 stat 10003361 reason 3 [RESERVED_METHOD] mthd 0d84 data 00000000 code 00000000 nouveau 0000:1f:00.0: disp: chid 0 stat 10003360 reason 3 [RESERVED_METHOD] mthd 0d80 data 00000000 code 00000000 nouveau 0000:1f:00.0: DRM: CRC notifier ctx for head 3 not finished after 50ms So, fix that. Signed-off-by: Lyude Paul <[email protected]> Fixes: c4b27bc8682c ("drm/nouveau/kms/nv50-: convert core crc_set_src() to new push macros") Signed-off-by: Ben Skeggs <[email protected]>
2020-09-03drm/radeon: Prefer lower feedback dividersKai-Heng Feng1-1/+1
Commit 2e26ccb119bd ("drm/radeon: prefer lower reference dividers") fixed screen flicker for HP Compaq nx9420 but breaks other laptops like Asus X50SL. Turns out we also need to favor lower feedback dividers. Users confirmed this change fixes the regression and doesn't regress the original fix. Fixes: 2e26ccb119bd ("drm/radeon: prefer lower reference dividers") BugLink: https://bugs.launchpad.net/bugs/1791312 BugLink: https://bugs.launchpad.net/bugs/1861554 Reviewed-by: Christian König <[email protected]> Signed-off-by: Kai-Heng Feng <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-09-03drm/amdgpu: Fix bug in reporting voltage for CIKSandeep Raghuraman1-1/+2
On my R9 390, the voltage was reported as a constant 1000 mV. This was due to a bug in smu7_hwmgr.c, in the smu7_read_sensor() function, where some magic constants were used in a condition, to determine whether the voltage should be read from PLANE2_VID or PLANE1_VID. The VDDC mask was incorrectly used, instead of the VDDGFX mask. This patch changes the code to use the correct defined constants (and apply the correct bitshift), thus resulting in correct voltage reporting. Signed-off-by: Sandeep Raghuraman <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-09-03drm/amdgpu: Specify get_argument function for ci_smu_funcsSandeep Raghuraman1-0/+2
Starting in Linux 5.8, the graphics and memory clock frequency were not being reported for CIK cards. This is a regression, since they were reported correctly in Linux 5.7. After investigation, I discovered that the smum_send_msg_to_smc() function, attempts to call the corresponding get_argument() function of ci_smu_funcs. However, the get_argument() function is not defined in ci_smu_funcs. This patch fixes the bug by specifying the correct get_argument() function. Fixes: a0ec225633d9f6 ("drm/amd/powerplay: unified interfaces for message issuing and response checking") Signed-off-by: Sandeep Raghuraman <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2020-09-03drm/amd/pm: enable MP0 DPM for sienna_cichlidJiansong Chen1-1/+3
Enable MP0 clock DPM for sienna_cichlid. Signed-off-by: Jiansong Chen <[email protected]> Reviewed-by: Tao Zhou <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-09-03drm/amd/pm: avoid false alarm due to confusing softwareshutdowntemp settingEvan Quan1-2/+12
Normally softwareshutdowntemp should be greater than Thotspotlimit. However, on some VEGA10 ASIC, the softwareshutdowntemp is 91C while Thotspotlimit is 105C. This seems not right and may trigger some false alarms. Signed-off-by: Evan Quan <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2020-09-03drm/amd/pm: fix is_dpm_running() run error on 32bit systemKevin Wang3-9/+21
v1: the C type "unsigned long" size is 32bit on 32bit system, it will cause code logic error, so replace it with "uint64_t". v2: remove duplicate cast operation. Signed-off-by: Kevin <[email protected]> Suggest-by: Jiansong Chen <[email protected]> Reviewed-by: Jiansong Chen <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-09-03kconfig: remove redundant assignment prompt = promptDenis Efremov1-1/+0
Semi-automatic removing of localization macros changed the line from "prompt = _(prompt);" to "prompt = prompt;". Drop the reduntand assignment. Fixes: 694c49a7c01c ("kconfig: drop localization support") Signed-off-by: Denis Efremov <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2020-09-03kbuild: Documentation: clean up makefiles.rstRandy Dunlap1-9/+9
This is a general cleanup of kbuild/makefiles.rst: * Use "Chapter" for major heading references and use "section" for the next-level heading references, for consistency. * Section 3.8 was deleted long ago. * Drop the ending ':' in section names in the contents list. * Correct some section numbering references. * Correct verb agreement typo. * Fix run-on sentence punctuation. Signed-off-by: Randy Dunlap <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2020-09-03kconfig: streamline_config.pl: check defined(ENV variable) before using itRandy Dunlap1-1/+4
A user reported: 'Use of uninitialized value $ENV{"LMC_KEEP"} in split at ./scripts/kconfig/streamline_config.pl line 596.' so first check that $ENV{LMC_KEEP} is defined before trying to use it. Fixes: c027b02d89fd ("streamline_config.pl: add LMC_KEEP to preserve some kconfigs") Signed-off-by: Randy Dunlap <[email protected]> Acked-by: Steven Rostedt (VMware) <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2020-09-02block: allow for_each_bvec to support zero len bvecMing Lei1-1/+8
Block layer usually doesn't support or allow zero-length bvec. Since commit 1bdc76aea115 ("iov_iter: use bvec iterator to implement iterate_bvec()"), iterate_bvec() switches to bvec iterator. However, Al mentioned that 'Zero-length segments are not disallowed' in iov_iter. Fixes for_each_bvec() so that it can move on after seeing one zero length bvec. Fixes: 1bdc76aea115 ("iov_iter: use bvec iterator to implement iterate_bvec()") Reported-by: syzbot <[email protected]> Signed-off-by: Ming Lei <[email protected]> Tested-by: Tetsuo Handa <[email protected]> Cc: Al Viro <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: <[email protected]> Link: https://www.mail-archive.com/[email protected]/msg2262077.html Signed-off-by: Jens Axboe <[email protected]>
2020-09-02net: dp83867: Fix WoL SecureOn passwordDan Murphy1-2/+2
Fix the registers being written to as the values were being over written when writing the same registers. Fixes: caabee5b53f5 ("net: phy: dp83867: support Wake on LAN") Signed-off-by: Dan Murphy <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-02nfp: flower: fix ABI mismatch between driver and firmwareLouis Peens1-0/+2
Fix an issue where the driver wrongly detected ipv6 neighbour updates from the NFP as corrupt. Add a reserved field on the kernel side so it is similar to the ipv4 version of the struct and has space for the extra bytes from the card. Fixes: 9ea9bfa12240 ("nfp: flower: support ipv6 tunnel keep-alive messages from fw") Signed-off-by: Louis Peens <[email protected]> Signed-off-by: Simon Horman <[email protected]> Acked-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-02tipc: fix shutdown() of connectionless socketTetsuo Handa1-3/+6
syzbot is reporting hung task at nbd_ioctl() [1], for there are two problems regarding TIPC's connectionless socket's shutdown() operation. ---------- #include <fcntl.h> #include <sys/socket.h> #include <sys/ioctl.h> #include <linux/nbd.h> #include <unistd.h> int main(int argc, char *argv[]) { const int fd = open("/dev/nbd0", 3); alarm(5); ioctl(fd, NBD_SET_SOCK, socket(PF_TIPC, SOCK_DGRAM, 0)); ioctl(fd, NBD_DO_IT, 0); /* To be interrupted by SIGALRM. */ return 0; } ---------- One problem is that wait_for_completion() from flush_workqueue() from nbd_start_device_ioctl() from nbd_ioctl() cannot be completed when nbd_start_device_ioctl() received a signal at wait_event_interruptible(), for tipc_shutdown() from kernel_sock_shutdown(SHUT_RDWR) from nbd_mark_nsock_dead() from sock_shutdown() from nbd_start_device_ioctl() is failing to wake up a WQ thread sleeping at wait_woken() from tipc_wait_for_rcvmsg() from sock_recvmsg() from sock_xmit() from nbd_read_stat() from recv_work() scheduled by nbd_start_device() from nbd_start_device_ioctl(). Fix this problem by always invoking sk->sk_state_change() (like inet_shutdown() does) when tipc_shutdown() is called. The other problem is that tipc_wait_for_rcvmsg() cannot return when tipc_shutdown() is called, for tipc_shutdown() sets sk->sk_shutdown to SEND_SHUTDOWN (despite "how" is SHUT_RDWR) while tipc_wait_for_rcvmsg() needs sk->sk_shutdown set to RCV_SHUTDOWN or SHUTDOWN_MASK. Fix this problem by setting sk->sk_shutdown to SHUTDOWN_MASK (like inet_shutdown() does) when the socket is connectionless. [1] https://syzkaller.appspot.com/bug?id=3fe51d307c1f0a845485cf1798aa059d12bf18b2 Reported-by: syzbot <[email protected]> Signed-off-by: Tetsuo Handa <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-02ipv6: Fix sysctl max for fib_multipath_hash_policyIdo Schimmel1-1/+2
Cited commit added the possible value of '2', but it cannot be set. Fix it by adjusting the maximum value to '2'. This is consistent with the corresponding IPv4 sysctl. Before: # sysctl -w net.ipv6.fib_multipath_hash_policy=2 sysctl: setting key "net.ipv6.fib_multipath_hash_policy": Invalid argument net.ipv6.fib_multipath_hash_policy = 2 # sysctl net.ipv6.fib_multipath_hash_policy net.ipv6.fib_multipath_hash_policy = 0 After: # sysctl -w net.ipv6.fib_multipath_hash_policy=2 net.ipv6.fib_multipath_hash_policy = 2 # sysctl net.ipv6.fib_multipath_hash_policy net.ipv6.fib_multipath_hash_policy = 2 Fixes: d8f74f0975d8 ("ipv6: Support multipath hashing on inner IP pkts") Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Stephen Suryaputra <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-02drivers/net/wan/hdlc: Change the default of hard_header_len to 0Xie He1-1/+1
Change the default value of hard_header_len in hdlc.c from 16 to 0. Currently there are 6 HDLC protocol drivers, among them: hdlc_raw_eth, hdlc_cisco, hdlc_ppp, hdlc_x25 set hard_header_len when attaching the protocol, overriding the default. So this patch does not affect them. hdlc_raw and hdlc_fr don't set hard_header_len when attaching the protocol. So this patch will change the hard_header_len of the HDLC device for them from 16 to 0. This is the correct change because both hdlc_raw and hdlc_fr don't have header_ops, and the code in net/packet/af_packet.c expects the value of hard_header_len to be consistent with header_ops. In net/packet/af_packet.c, in the packet_snd function, for AF_PACKET/DGRAM sockets it would reserve a headroom of hard_header_len and call dev_hard_header to fill in that headroom, and for AF_PACKET/RAW sockets, it does not reserve the headroom and does not call dev_hard_header, but checks if the user has provided a header of length hard_header_len (in function dev_validate_header). Cc: Krzysztof Halasa <[email protected]> Cc: Martin Schiller <[email protected]> Signed-off-by: Xie He <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-02net: gemini: Fix another missing clk_disable_unprepare() in probeDan Carpenter1-17/+17
We recently added some calls to clk_disable_unprepare() but we missed the last error path if register_netdev() fails. I made a couple cleanups so we avoid mistakes like this in the future. First I reversed the "if (!ret)" condition and pulled the code in one indent level. Also, the "port->netdev = NULL;" is not required because "port" isn't used again outside this function so I deleted that line. Fixes: 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-02Merge branch 'for-linus' of ↵Linus Torvalds8-15/+57
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Jiri Kosina: - data sanitization and validtion fixes for report descriptor parser from Marc Zyngier - memory leak fix for hid-elan driver from Dinghao Liu - two device-specific quirks * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: core: Sanitize event code and type when mapping input HID: core: Correctly handle ReportSize being zero HID: elan: Fix memleak in elan_input_configured HID: microsoft: Add rumble support for the 8bitdo SN30 Pro+ controller HID: quirks: Set INCREMENT_USAGE_ON_DUPLICATE for all Saitek X52 devices
2020-09-02net: bcmgenet: fix mask check in bcmgenet_validate_flow()Denis Efremov1-1/+1
VALIDATE_MASK(eth_mask->h_source) is checked twice in a row in bcmgenet_validate_flow(). Add VALIDATE_MASK(eth_mask->h_dest) instead. Fixes: 3e370952287c ("net: bcmgenet: add support for ethtool rxnfc flows") Signed-off-by: Denis Efremov <[email protected]> Acked-by: Doug Berger <[email protected]> Acked-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-02amd-xgbe: Add support for new port modeShyam Sundar S K1-0/+13
Add support for a new port mode that is a backplane connection without support for auto negotiation. Signed-off-by: Shyam Sundar S K <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-02Merge tag 'for-5.9/dm-fixes' of ↵Linus Torvalds7-22/+60
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - writecache fix to allow dax_direct_access() to partitioned pmem devices. - multipath fix to avoid any Path Group initialization if 'pg_init_in_progress' isn't set. - crypt fix to use DECLARE_CRYPTO_WAIT() for onstack wait structures. - integrity fix to properly check integrity after device creation when in bitmap mode. - thinp and cache target __create_persistent_data_objects() fixes to reset the metadata's dm_block_manager pointer from PTR_ERR to NULL before returning from error path. - persistent-data block manager fix to guard against dm_block_manager NULL pointer dereference in dm_bm_is_read_only() and update various opencoded bm->read_only checks to use dm_bm_is_read_only() instead. * tag 'for-5.9/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm thin metadata: Fix use-after-free in dm_bm_set_read_only dm thin metadata: Avoid returning cmd->bm wild pointer on error dm cache metadata: Avoid returning cmd->bm wild pointer on error dm integrity: fix error reporting in bitmap mode after creation dm crypt: Initialize crypto wait structures dm mpath: fix racey management of PG initialization dm writecache: handle DAX to partitions on persistent memory correctly
Powered by cgit, Gruvboxed by Blaster4385.