aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2017-10-21cpu/hotplug: Reset node state after operationThomas Gleixner1-0/+5
The recent rework of the cpu hotplug internals changed the usage of the per cpu state->node field, but missed to clean it up after usage. So subsequent hotplug operations use the stale pointer from a previous operation and hand it into the callback functions. The callbacks then dereference a pointer which either belongs to a different facility or points to freed and potentially reused memory. In either case data corruption and crashes are the obvious consequence. Reset the node and the last pointers in the per cpu state to NULL after the operation which set them has completed. Fixes: 96abb968549c ("smp/hotplug: Allow external multi-instance rollback") Reported-by: Tvrtko Ursulin <tursulin@ursulin.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1710211606130.3213@nanos
2017-10-21Merge branch 'aquantia-fixes'David S. Miller12-146/+284
Igor Russkikh says: ==================== net: aquantia: Atlantic driver 10/2017 updates This patchset fixes various issues in driver, improves parameters for better performance on 10Gbit link ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-21net: aquantia: Bad udp rate on default interrupt coalescingIgor Russkikh1-6/+6
Default Tx rates cause very long ISR delays on Tx. 0xff is 510us delay, giving only ~ 2000 interrupts per seconds for Tx rings cleanup. With these settings udp tx rate was never higher than ~800Mbps on a single stream. Changing min delay to 0xF makes it way better with ~6Gbps TCP stream performance is almost unaffected by this change, since LSO optimizations play important role. CPU load is affected insignificantly by this change. Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-21net: aquantia: Enable coalescing management via ethtool interfaceIgor Russkikh9-62/+155
Aquantia NIC allows both TX and RX interrupt throttle rate (ITR) management, but this was used in a very limited way via predefined values. This patch allows to setup ITR default values via module command line arguments and via standard ethtool coalescing settings. Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-21net: aquantia: mmio unmap was not performed on driver removalIgor Russkikh1-0/+3
That may lead to mmio resource leakage. Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-21net: aquantia: Limit number of MSIX irqs to the number of cpusIgor Russkikh1-4/+7
There is no much practical use from having MSIX vectors more that number of cpus, thus cap this first with preconfigured limit, then with number of cpus online. Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-21net: aquantia: Fixed transient link up/down/up notificationIgor Russkikh1-0/+2
When doing ifconfig down/up, driver did not reported carrier_off neither in nic_stop nor in nic_start. That caused link to be visible as "up" during couple of seconds immediately after "ifconfig up". Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-21net: aquantia: Add queue restarts stats counterIgor Russkikh2-58/+37
Queue stat strings are cleaned up, duplicate stat name strings removed, queue restarts counter added Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-21net: aquantia: Reset nic statistics on interface up/downIgor Russkikh6-17/+75
Internal statistics system on chip never gets reset until hardware reboot. This is quite inconvenient in terms of ethtool statistics usage. This patch implements incremental statistics update inside of service callback. Upon nic initialization, first request is done to fetch initial stat data, current collected stat data gets cleared. Internal statistics mailbox readout is improved to save space and increase readability Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-21android: binder: Fix null ptr dereference in debug msgSherry Yang1-1/+1
Don't access next->data in kernel debug message when the next buffer is null. Acked-by: Arve Hjønnevåg <arve@android.com> Signed-off-by: Sherry Yang <sherryy@android.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-21android: binder: Don't get mm from taskSherry Yang2-14/+9
Use binder_alloc struct's mm_struct rather than getting a reference to the mm struct through get_task_mm to avoid a potential deadlock between lru lock, task lock and dentry lock, since a thread can be holding the task lock and the dentry lock while trying to acquire the lru lock. Acked-by: Arve Hjønnevåg <arve@android.com> Signed-off-by: Sherry Yang <sherryy@android.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-21udp: make some messages more descriptiveMatteo Croce1-2/+2
In the UDP code there are two leftover error messages with very few meaning. Replace them with a more descriptive error message as some users reported them as "strange network error". Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-21geneve: Fix function matching VNI and tunnel ID on big-endianStefano Brivio1-6/+0
On big-endian machines, functions converting between tunnel ID and VNI use the three LSBs of tunnel ID storage to map VNI. The comparison function eq_tun_id_and_vni(), on the other hand, attempted to map the VNI from the three MSBs. Fix it by using the same check implemented on LE, which maps VNI from the three LSBs of tunnel ID. Fixes: 2e0b26e10352 ("geneve: Optimize geneve device lookup.") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: Jakub Sitnicki <jkbs@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-21Merge tag 'linux-can-fixes-for-4.14-20171019' of ↵David S. Miller5-30/+98
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2017-10-19 this is a pull request of 11 patches for the upcoming 4.14 release. There are 6 patches by ZHU Yi for the flexcan driver, that work around the CAN error handling state transition problems found in various incarnations of the flexcan IP core. The patch by Colin Ian King fixes a potential NULL pointer deref in the CAN broad cast manager (bcm). One patch by me replaces a direct deref of a RCU protected pointer by rcu_access_pointer. My second patch adds missing OOM error handling in af_can. A patch by Stefan Mätje for the esd_usb2 driver fixes the dlc in received RTR frames. And the last patch is by Wolfgang Grandegger, it fixes a busy loop in the gs_usb driver in case it runs out of TX contexts. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-21hv_sock: add locking in the open/close/release code pathsDexuan Cui1-4/+18
Without the patch, when hvs_open_connection() hasn't completely established a connection (e.g. it has changed sk->sk_state to SS_CONNECTED, but hasn't inserted the sock into the connected queue), vsock_stream_connect() may see the sk_state change and return the connection to the userspace, and next when the userspace closes the connection quickly, hvs_release() may not see the connection in the connected queue; finally hvs_open_connection() inserts the connection into the queue, but we won't be able to purge the connection for ever. Signed-off-by: Dexuan Cui <decui@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Cathy Avery <cavery@redhat.com> Cc: Rolf Neugebauer <rolf.neugebauer@docker.com> Cc: Marcelo Cerri <marcelo.cerri@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-21net/ncsi: Fix length of GVI response packetGavin Shan1-1/+1
The length of GVI (GetVersionInfo) response packet should be 40 instead of 36. This issue was found from /sys/kernel/debug/ncsi/eth0/stats. # ethtool --ncsi eth0 swstats : RESPONSE OK TIMEOUT ERROR ======================================= GVI 0 0 2 With this applied, no error reported on GVI response packets: # ethtool --ncsi eth0 swstats : RESPONSE OK TIMEOUT ERROR ======================================= GVI 2 0 0 Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-21net/ncsi: Enforce failover on link monitor timeoutGavin Shan1-3/+5
The NCSI channel has been configured to provide service if its link monitor timer is enabled, regardless of its state (inactive or active). So the timeout event on the link monitor indicates the out-of-service on that channel, for which a failover is needed. This sets NCSI_DEV_RESHUFFLE flag to enforce failover on link monitor timeout, regardless the channel's original state (inactive or active). Also, the link is put into "down" state to give the failing channel lowest priority when selecting for the active channel. The state of failing channel should be set to active in order for deinitialization and failover to be done. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-21net/ncsi: Disable HWA mode when no channels are foundGavin Shan1-2/+10
When there are no NCSI channels probed, HWA (Hardware Arbitration) mode is enabled. It's not correct because HWA depends on the fact: NCSI channels exist and all of them support HWA mode. This disables HWA when no channels are probed. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-21net/ncsi: Stop monitor if channel times out or is inactiveSamuel Mendoza-Jonas1-6/+9
ncsi_channel_monitor() misses stopping the channel monitor in several places that it should, causing a WARN_ON_ONCE() to trigger when the monitor is re-started later, eg: [ 459.040000] WARNING: CPU: 0 PID: 1093 at net/ncsi/ncsi-manage.c:269 ncsi_start_channel_monitor+0x7c/0x90 [ 459.040000] CPU: 0 PID: 1093 Comm: kworker/0:3 Not tainted 4.10.17-gaca2fdd #140 [ 459.040000] Hardware name: ASpeed SoC [ 459.040000] Workqueue: events ncsi_dev_work [ 459.040000] [<80010094>] (unwind_backtrace) from [<8000d950>] (show_stack+0x20/0x24) [ 459.040000] [<8000d950>] (show_stack) from [<801dbf70>] (dump_stack+0x20/0x28) [ 459.040000] [<801dbf70>] (dump_stack) from [<80018d7c>] (__warn+0xe0/0x108) [ 459.040000] [<80018d7c>] (__warn) from [<80018e70>] (warn_slowpath_null+0x30/0x38) [ 459.040000] [<80018e70>] (warn_slowpath_null) from [<803f6a08>] (ncsi_start_channel_monitor+0x7c/0x90) [ 459.040000] [<803f6a08>] (ncsi_start_channel_monitor) from [<803f7664>] (ncsi_configure_channel+0xdc/0x5fc) [ 459.040000] [<803f7664>] (ncsi_configure_channel) from [<803f8160>] (ncsi_dev_work+0xac/0x474) [ 459.040000] [<803f8160>] (ncsi_dev_work) from [<8002d244>] (process_one_work+0x1e0/0x450) [ 459.040000] [<8002d244>] (process_one_work) from [<8002d510>] (worker_thread+0x5c/0x570) [ 459.040000] [<8002d510>] (worker_thread) from [<80033614>] (kthread+0x124/0x164) [ 459.040000] [<80033614>] (kthread) from [<8000a5e8>] (ret_from_fork+0x14/0x2c) This also updates the monitor instead of just returning if ncsi_xmit_cmd() fails to send the get-link-status command so that the monitor properly times out. Fixes: e6f44ed6d04d3 "net/ncsi: Package and channel management" Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-21net/ncsi: Fix AEN HNCDSC packet lengthSamuel Mendoza-Jonas1-1/+1
Correct the value of the HNCDSC AEN packet. Fixes: 7a82ecf4cfb85 "net/ncsi: NCSI AEN packet handler" Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-21packet: avoid panic in packet_getsockopt()Eric Dumazet1-8/+16
syzkaller got crashes in packet_getsockopt() processing PACKET_ROLLOVER_STATS command while another thread was managing to change po->rollover Using RCU will fix this bug. We might later add proper RCU annotations for sparse sake. In v2: I replaced kfree(rollover) in fanout_add() to kfree_rcu() variant, as spotted by John. Fixes: a9b6391814d5 ("packet: rollover statistics") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: John Sperbeck <jsperbeck@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-21tcp/dccp: fix ireq->opt racesEric Dumazet7-39/+34
syzkaller found another bug in DCCP/TCP stacks [1] For the reasons explained in commit ce1050089c96 ("tcp/dccp: fix ireq->pktopts race"), we need to make sure we do not access ireq->opt unless we own the request sock. Note the opt field is renamed to ireq_opt to ease grep games. [1] BUG: KASAN: use-after-free in ip_queue_xmit+0x1687/0x18e0 net/ipv4/ip_output.c:474 Read of size 1 at addr ffff8801c951039c by task syz-executor5/3295 CPU: 1 PID: 3295 Comm: syz-executor5 Not tainted 4.14.0-rc4+ #80 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 print_address_description+0x73/0x250 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 [inline] kasan_report+0x25b/0x340 mm/kasan/report.c:409 __asan_report_load1_noabort+0x14/0x20 mm/kasan/report.c:427 ip_queue_xmit+0x1687/0x18e0 net/ipv4/ip_output.c:474 tcp_transmit_skb+0x1ab7/0x3840 net/ipv4/tcp_output.c:1135 tcp_send_ack.part.37+0x3bb/0x650 net/ipv4/tcp_output.c:3587 tcp_send_ack+0x49/0x60 net/ipv4/tcp_output.c:3557 __tcp_ack_snd_check+0x2c6/0x4b0 net/ipv4/tcp_input.c:5072 tcp_ack_snd_check net/ipv4/tcp_input.c:5085 [inline] tcp_rcv_state_process+0x2eff/0x4850 net/ipv4/tcp_input.c:6071 tcp_child_process+0x342/0x990 net/ipv4/tcp_minisocks.c:816 tcp_v4_rcv+0x1827/0x2f80 net/ipv4/tcp_ipv4.c:1682 ip_local_deliver_finish+0x2e2/0xba0 net/ipv4/ip_input.c:216 NF_HOOK include/linux/netfilter.h:249 [inline] ip_local_deliver+0x1ce/0x6e0 net/ipv4/ip_input.c:257 dst_input include/net/dst.h:464 [inline] ip_rcv_finish+0x887/0x19a0 net/ipv4/ip_input.c:397 NF_HOOK include/linux/netfilter.h:249 [inline] ip_rcv+0xc3f/0x1820 net/ipv4/ip_input.c:493 __netif_receive_skb_core+0x1a3e/0x34b0 net/core/dev.c:4476 __netif_receive_skb+0x2c/0x1b0 net/core/dev.c:4514 netif_receive_skb_internal+0x10b/0x670 net/core/dev.c:4587 netif_receive_skb+0xae/0x390 net/core/dev.c:4611 tun_rx_batched.isra.50+0x5ed/0x860 drivers/net/tun.c:1372 tun_get_user+0x249c/0x36d0 drivers/net/tun.c:1766 tun_chr_write_iter+0xbf/0x160 drivers/net/tun.c:1792 call_write_iter include/linux/fs.h:1770 [inline] new_sync_write fs/read_write.c:468 [inline] __vfs_write+0x68a/0x970 fs/read_write.c:481 vfs_write+0x18f/0x510 fs/read_write.c:543 SYSC_write fs/read_write.c:588 [inline] SyS_write+0xef/0x220 fs/read_write.c:580 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x40c341 RSP: 002b:00007f469523ec10 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000718000 RCX: 000000000040c341 RDX: 0000000000000037 RSI: 0000000020004000 RDI: 0000000000000015 RBP: 0000000000000086 R08: 0000000000000000 R09: 0000000000000000 R10: 00000000000f4240 R11: 0000000000000293 R12: 00000000004b7fd1 R13: 00000000ffffffff R14: 0000000020000000 R15: 0000000000025000 Allocated by task 3295: save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 [inline] kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:551 __do_kmalloc mm/slab.c:3725 [inline] __kmalloc+0x162/0x760 mm/slab.c:3734 kmalloc include/linux/slab.h:498 [inline] tcp_v4_save_options include/net/tcp.h:1962 [inline] tcp_v4_init_req+0x2d3/0x3e0 net/ipv4/tcp_ipv4.c:1271 tcp_conn_request+0xf6d/0x3410 net/ipv4/tcp_input.c:6283 tcp_v4_conn_request+0x157/0x210 net/ipv4/tcp_ipv4.c:1313 tcp_rcv_state_process+0x8ea/0x4850 net/ipv4/tcp_input.c:5857 tcp_v4_do_rcv+0x55c/0x7d0 net/ipv4/tcp_ipv4.c:1482 tcp_v4_rcv+0x2d10/0x2f80 net/ipv4/tcp_ipv4.c:1711 ip_local_deliver_finish+0x2e2/0xba0 net/ipv4/ip_input.c:216 NF_HOOK include/linux/netfilter.h:249 [inline] ip_local_deliver+0x1ce/0x6e0 net/ipv4/ip_input.c:257 dst_input include/net/dst.h:464 [inline] ip_rcv_finish+0x887/0x19a0 net/ipv4/ip_input.c:397 NF_HOOK include/linux/netfilter.h:249 [inline] ip_rcv+0xc3f/0x1820 net/ipv4/ip_input.c:493 __netif_receive_skb_core+0x1a3e/0x34b0 net/core/dev.c:4476 __netif_receive_skb+0x2c/0x1b0 net/core/dev.c:4514 netif_receive_skb_internal+0x10b/0x670 net/core/dev.c:4587 netif_receive_skb+0xae/0x390 net/core/dev.c:4611 tun_rx_batched.isra.50+0x5ed/0x860 drivers/net/tun.c:1372 tun_get_user+0x249c/0x36d0 drivers/net/tun.c:1766 tun_chr_write_iter+0xbf/0x160 drivers/net/tun.c:1792 call_write_iter include/linux/fs.h:1770 [inline] new_sync_write fs/read_write.c:468 [inline] __vfs_write+0x68a/0x970 fs/read_write.c:481 vfs_write+0x18f/0x510 fs/read_write.c:543 SYSC_write fs/read_write.c:588 [inline] SyS_write+0xef/0x220 fs/read_write.c:580 entry_SYSCALL_64_fastpath+0x1f/0xbe Freed by task 3306: save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 [inline] kasan_slab_free+0x71/0xc0 mm/kasan/kasan.c:524 __cache_free mm/slab.c:3503 [inline] kfree+0xca/0x250 mm/slab.c:3820 inet_sock_destruct+0x59d/0x950 net/ipv4/af_inet.c:157 __sk_destruct+0xfd/0x910 net/core/sock.c:1560 sk_destruct+0x47/0x80 net/core/sock.c:1595 __sk_free+0x57/0x230 net/core/sock.c:1603 sk_free+0x2a/0x40 net/core/sock.c:1614 sock_put include/net/sock.h:1652 [inline] inet_csk_complete_hashdance+0xd5/0xf0 net/ipv4/inet_connection_sock.c:959 tcp_check_req+0xf4d/0x1620 net/ipv4/tcp_minisocks.c:765 tcp_v4_rcv+0x17f6/0x2f80 net/ipv4/tcp_ipv4.c:1675 ip_local_deliver_finish+0x2e2/0xba0 net/ipv4/ip_input.c:216 NF_HOOK include/linux/netfilter.h:249 [inline] ip_local_deliver+0x1ce/0x6e0 net/ipv4/ip_input.c:257 dst_input include/net/dst.h:464 [inline] ip_rcv_finish+0x887/0x19a0 net/ipv4/ip_input.c:397 NF_HOOK include/linux/netfilter.h:249 [inline] ip_rcv+0xc3f/0x1820 net/ipv4/ip_input.c:493 __netif_receive_skb_core+0x1a3e/0x34b0 net/core/dev.c:4476 __netif_receive_skb+0x2c/0x1b0 net/core/dev.c:4514 netif_receive_skb_internal+0x10b/0x670 net/core/dev.c:4587 netif_receive_skb+0xae/0x390 net/core/dev.c:4611 tun_rx_batched.isra.50+0x5ed/0x860 drivers/net/tun.c:1372 tun_get_user+0x249c/0x36d0 drivers/net/tun.c:1766 tun_chr_write_iter+0xbf/0x160 drivers/net/tun.c:1792 call_write_iter include/linux/fs.h:1770 [inline] new_sync_write fs/read_write.c:468 [inline] __vfs_write+0x68a/0x970 fs/read_write.c:481 vfs_write+0x18f/0x510 fs/read_write.c:543 SYSC_write fs/read_write.c:588 [inline] SyS_write+0xef/0x220 fs/read_write.c:580 entry_SYSCALL_64_fastpath+0x1f/0xbe Fixes: e994b2f0fb92 ("tcp: do not lock listener to process SYN packets") Fixes: 079096f103fa ("tcp/dccp: install syn_recv requests into ehash table") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds4-1/+18
Pull ARM fixes from Russell King: "Three fixes this time around: - ensure sparse realises that we're building for a 32-bit arch on 64-bit hosts. - use the correct instruction for semihosting on v7m (nommu) CPUs. - reserve address 0 to prevent the first page of memory being used on nommu systems" * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8704/1: semihosting: use proper instruction on v7m processors ARM: 8701/1: fix sparse flags for build on 64bit machines ARM: 8700/1: nommu: always reserve address 0 away
2017-10-20Merge tag 'armsoc-fixes' of ↵Linus Torvalds25-62/+92
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "Here is another set of bugfixes for ARM SoCs, mostly harmless: - a boot regression fix on ux500 - PCIe interrupts on NXP i.MX7 and on Marvell Armada 7K/8K were wired up wrong, in different ways - Armada XP support for large memory never worked - the socfpga reset controller now builds on 64-bit - minor device tree corrections on gemini, mvebu, r-pi 3, rockchip and at91" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: ux500: Fix regression while init PM domains ARM: dts: fix PCLK name on Gemini and MOXA ART arm64: dts: rockchip: fix typo in iommu nodes arm64: dts: rockchip: correct vqmmc voltage for rk3399 platforms ARM: dts: imx7d: Invert legacy PCI irq mapping bus: mbus: fix window size calculation for 4GB windows ARM: dts: at91: sama5d2: add ADC hw trigger edge type ARM: dts: at91: sama5d2_xplained: enable ADTRG pin ARM: dts: at91: at91-sama5d27_som1: fix PHY ID ARM: dts: bcm283x: Fix console path on RPi3 reset: socfpga: fix for 64-bit compilation ARM: dts: Fix I2C repeated start issue on Armada-38x arm64: dts: marvell: fix interrupt-map property for Armada CP110 PCIe controller arm64: dts: salvator-common: add 12V regulator to backlight ARM: dts: sun6i: Fix endpoint IDs in second display pipeline arm64: allwinner: a64: pine64: Use dcdc1 regulator for mmc0
2017-10-20Merge tag 'sunxi-fixes-for-4.14' of ↵Arnd Bergmann2-16/+9
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into fixes Pull "Allwinner fixes for 4.14" from Maxime Ripard: Two fixes, one for the A31 DRM binding, and one for a missing regulator on the pine MMC controller. * tag 'sunxi-fixes-for-4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun6i: Fix endpoint IDs in second display pipeline arm64: allwinner: a64: pine64: Use dcdc1 regulator for mmc0
2017-10-20waitid(): Avoid unbalanced user_access_end() on access_ok() errorKees Cook1-2/+2
As pointed out by Linus and David, the earlier waitid() fix resulted in a (currently harmless) unbalanced user_access_end() call. This fixes it to just directly return EFAULT on access_ok() failure. Fixes: 96ca579a1ecc ("waitid(): Add missing access_ok() checks") Acked-by: David Daney <david.daney@cavium.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-20lkdtm: Constify the crashtypes tableKees Cook1-9/+9
Since nothing in the crashtypes table ever changes, mark it const. Adds some missing "static" markings as well. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-20lkdtm: Convert from jprobe to kprobeKees Cook1-109/+45
The jprobe subsystem is being removed, so convert to using kprobe instead. Cc: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-20nvmem: add a driver for the Amlogic Meson6/Meson8/Meson8b SoCsMartin Blumenstingl3-0/+277
This adds a driver to access the efuse on Amlogic Meson6, Meson8 and Meson8b SoCs. These SoCs are accessing the efuse IP block directly through the registers in the "secbus" region. This makes it different from the Meson GX efuse driver which uses the "secure monitor" firmware to access the efuse. The efuse on Meson6 can only read one byte at a time, while the efuse on Meson8 and Meson8b always reads 4 bytes at a time. The new driver supports both, but due to lack of hardware Meson6 support was not tested. The hardware also supports writing. However, this is currently not supported by the driver. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-20nvmem: meson-efuse: indicate that this driver is only for Meson GX SoCsMartin Blumenstingl3-5/+5
The current Amlogic Meson eFuse driver only supports the 64-bit SoCs (GXBB and newer). Older SoCs cannot be supported by the same driver because they do not use the meson secure monitor firmware to access the hardware. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-20dt-bindings: nvmem: Describe the Amlogic Meson6/Meson8/Meson8b efuseMartin Blumenstingl1-0/+22
Amlogic Meson6, Meson8 and Meson8b SoCs have an efuse which contains calibration data from the factory (for the internal temperature sensor and some CVBS connector settings). Some manufacturers also store the MAC address or serial number in the efuse. This documents the devicetree bindings for the efuse on these SoCs. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-20nvmem: rockchip: add support for RK3368Romain Perier2-0/+5
This adds the necessary function for handling support on RK3368 SoCs Signed-off-by: Romain Perier <romain.perier@collabora.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-20vmbus: initialize reserved fields in messagesStephen Hemminger1-0/+2
Make sure and initialize reserved fields in messages to host, rather than passing stack junk. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-20Merge tag 'vme-next-4.14-rc4' of https://gitlab.collabora.com/martyn/linux ↵Greg Kroah-Hartman4-228/+157
into char-misc-next Martyn writes: VME Subsystem changes for master v4.14-rc4: - Corrections across the VME subsystem to better align with the preferred kernel coding style.
2017-10-20binder: pr_err() strings should end with newlinesArvind Yadav1-1/+1
pr_err() messages should terminated with a new-line to avoid other messages being concatenated onto the end. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-20android: binder: Change binder_shrinker to staticSherry Yang1-1/+1
binder_shrinker struct is not used anywhere outside of binder_alloc.c and should be static. Acked-by: Arve Hjønnevåg <arve@android.com> Signed-off-by: Sherry Yang <sherryy@android.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-20android: binder: Remove unused vma argumentSherry Yang1-9/+7
The vma argument in update_page_range is no longer used after 74310e06 ("android: binder: Move buffer out of area shared with user space"), since mmap_handler no longer calls update_page_range with a vma. Acked-by: Arve Hjønnevåg <arve@android.com> Signed-off-by: Sherry Yang <sherryy@android.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-20parport: make parport_ip32_ops const and __initconstBhumika Goyal1-1/+1
Make this const as it is only used during a copy operation. This usage is inside init function and the structure is not referenced after initialisation, so make it __initconst too. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-20tracing, mei: Remove unused trace event mei_pci_cfg_writeSteven Rostedt (VMware)2-20/+0
Commit a96c548291 ("mei: trace pci configuration space io") added the trace event mei_pci_cfg_write but never used it. As trace events that are defined take up space for data structures and functions created for them, it is a waste of memory to have one defined but not used. Remove this trace event. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-20pcmcia: m32r: Convert timers to use timer_setup()Kees Cook2-10/+4
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Cc: linux-pcmcia@lists.infradead.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-20char: pcmcia: Convert timers to use timer_setup()Kees Cook3-11/+10
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Harald Welte <laforge@gnumonks.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jarod Wilson <jarod@redhat.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-20doc: coresight: correct usage for disabling idle statesLeo Yan1-5/+17
In the coresight CPU debug document it suggests to use 'echo' command to set latency request to /dev/cpu_dma_latency so can disable all CPU idle states, but in fact this doesn't work. This is because when the command 'echo' exits, it releases the device node's file descriptor and the kernel release function removes the QoS constraint; finally when the command 'echo' finished there have no constraint imposed on cpu_dma_latency. This patch changes to use 'exec' to access '/dev/cpu_dma_latency', the command 'exec' can avoid the file descriptor to be closed so we can keep the constraint on cpu_dma_latency. This patch also adds the info for reference docs for PM QoS and cpuidle sysfs. Cc: Jonathan Corbet <corbet@lwn.net> Cc: Sudeep Holla <sudeep.holla@arm.com> Reported-by: Kim Phillips <kim.phillips@arm.com> Suggested-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-20coresight: Extend the PIDR mask to cover relevant bits in PIDR2Suzuki K Poulose7-26/+26
As per coresight standards, PIDR2 register has the following format : [2-0] - JEP106_bits6to4 [3] - JEDEC, designer ID is specified by JEDEC. However some of the drivers only use mask of 0x3 for the PIDR2 leaving bits [3-2] unchecked, which could potentially match the component for a different device altogether. This patch fixes the mask and the corresponding id bits for the existing devices. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-20vmbus: hvsock: add proper sync for vmbus_hvsock_device_unregister()Dexuan Cui1-1/+4
Without the patch, vmbus_hvsock_device_unregister() can destroy the device prematurely when close() is called, and can cause NULl dereferencing or potential data loss (the last portion of the data stream may be dropped prematurely). Signed-off-by: Dexuan Cui <decui@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-20Merge branch 'sockmap-fixes'David S. Miller11-34/+74
John Fastabend says: ==================== sockmap fixes for net The following implements a set of fixes for sockmap and changes the API slightly in a few places to reduce preempt_disable/enable scope. We do this here in net because it requires an API change and this avoids getting stuck with legacy API going forward. The short description: Access to skb mark is removed, it is problematic when we add features in the future because mark is a union and used by the TCP/socket code internally. We don't want to expose this to the BPF programs or let programs change the values. The other change is caching metadata in the skb itself between when the BPF program returns a redirect code and the core code implements the redirect. This avoids having per cpu metadata. Finally, tighten restriction on using sockmap to CAP_NET_ADMIN and only SOCK_STREAM sockets. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20bpf: require CAP_NET_ADMIN when using devmapJohn Fastabend1-0/+3
Devmap is used with XDP which requires CAP_NET_ADMIN so lets also make CAP_NET_ADMIN required to use the map. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20bpf: require CAP_NET_ADMIN when using sockmap mapsJohn Fastabend1-0/+3
Restrict sockmap to CAP_NET_ADMIN. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20bpf: remove mark access for SK_SKB program typesJohn Fastabend2-3/+15
The skb->mark field is a union with reserved_tailroom which is used in the TCP code paths from stream memory allocation. Allowing SK_SKB programs to set this field creates a conflict with future code optimizations, such as "gifting" the skb to the egress path instead of creating a new skb and doing a memcpy. Because we do not have a released version of SK_SKB yet lets just remove it for now. A more appropriate scratch pad to use at the socket layer is dev_scratch, but lets add that in future kernels when needed. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20bpf: avoid preempt enable/disable in sockmap using tcp_skb_cb regionJohn Fastabend8-30/+36
SK_SKB BPF programs are run from the socket/tcp context but early in the stack before much of the TCP metadata is needed in tcp_skb_cb. So we can use some unused fields to place BPF metadata needed for SK_SKB programs when implementing the redirect function. This allows us to drop the preempt disable logic. It does however require an API change so sk_redirect_map() has been updated to additionally provide ctx_ptr to skb. Note, we do however continue to disable/enable preemption around actual BPF program running to account for map updates. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20bpf: enforce TCP only support for sockmapJohn Fastabend2-1/+17
Only TCP sockets have been tested and at the moment the state change callback only handles TCP sockets. This adds a check to ensure that sockets actually being added are TCP sockets. For net-next we can consider UDP support. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Powered by cgit, Gruvboxed by Blaster4385.