aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-09-09drm/sun4i: tv: Include drm_atomic.hMaxime Ripard1-0/+1
Commit ec491291dc94 ("drm/sun4i: tv: Merge mode_set into atomic_enable") has introduced a call to drm_atomic_get_new_crtc_state(), but didn't include drm_atomic.h. On CONFIG_OF systems, this is fine because drm_atomic.h is included by drm_of.h through drm_bridge.h. However, whenever CONFIG_OF isn't set, we end up with a compilation error. Fixes: ec491291dc94 ("drm/sun4i: tv: Merge mode_set into atomic_enable") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220909093116.4141982-1-maxime@cerno.tech
2022-09-08drm/dp_mst: Avoid deleting payloads for connectors staying enabledImre Deak1-0/+3
When an MST connector stays enabled during a commit the connector's MST state needs to be added to the atomic state, but the corresponding MST payload allocation shouldn't be set for deletion; fix such modesets by ensuring the above even if the connector was already enabled before the modeset. The issue led to the following: [ 761.992923] i915 0000:00:02.0: drm_WARN_ON(payload->delete) [ 761.992949] WARNING: CPU: 6 PID: 1401 at drivers/gpu/drm/display/drm_dp_mst_topology.c:4221 drm_dp_atomic_find_time_slots+0x236/0x280 [drm_display_helper] [ 761.992955] Modules linked in: snd_hda_intel i915 drm_buddy drm_display_helper drm_kms_helper ttm drm snd_hda_codec_hdmi snd_intel_dspcfg snd_hda_codec snd_hwdep snd_hda_core snd_pcm prime_numbers i2c_algo_bit syscopyarea sysfillrect sysimgblt fb_sys_fops x86_pkg_temp_thermal cdc_ether coretemp crct10dif_pclmul usbnet crc32_pclmul mii ghash_clmulni_intel e1000e mei_me ptp i2c_i801 pps_core mei i2c_smbus intel_lpss_pci fuse [last unloaded: drm] [ 761.992986] CPU: 6 PID: 1401 Comm: testdisplay Tainted: G U 6.0.0-rc4-imre+ #565 [ 761.992989] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-P DDR5 RVP, BIOS ADLPFWI1.R00.3135.A00.2203251419 03/25/2022 [ 761.992990] RIP: 0010:drm_dp_atomic_find_time_slots+0x236/0x280 [drm_display_helper] [ 761.992994] Code: 4c 8b 67 50 4d 85 e4 75 03 4c 8b 27 e8 03 28 4e e1 48 c7 c1 8b 26 2c a0 4c 89 e2 48 c7 c7 a8 26 2c a0 48 89 c6 e8 31 d5 88 e1 <0f> 0b 49 8b 85 d0 00 00 00 4c 89 fa 48 c7 c6 a0 41 2c a0 48 8b 78 [ 761.992995] RSP: 0018:ffffc9000177ba60 EFLAGS: 00010286 [ 761.992998] RAX: 0000000000000000 RBX: ffff88810d2f1540 RCX: 0000000000000000 [ 761.992999] RDX: 0000000000000001 RSI: ffffffff82368a25 RDI: 00000000ffffffff [ 761.993000] RBP: ffff888142299d80 R08: ffff8884adbfdfe8 R09: 00000000ffefffff [ 761.993001] R10: ffff8884a6bfe000 R11: ffff8884ac443c30 R12: ffff888102972f90 [ 761.993002] R13: ffff8881163e2cf0 R14: 00000000000003ac R15: ffff88810c501000 [ 761.993003] FS: 00007f81e4c459c0(0000) GS:ffff888496500000(0000) knlGS:0000000000000000 [ 761.993004] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 761.993005] CR2: 0000555dac962a98 CR3: 0000000123a34006 CR4: 0000000000770ee0 [ 761.993006] PKRU: 55555554 [ 761.993007] Call Trace: [ 761.993009] <TASK> [ 761.993012] intel_dp_mst_compute_config+0x19a/0x350 [i915] [ 761.993090] intel_atomic_check+0xf37/0x3180 [i915] [ 761.993168] drm_atomic_check_only+0x5d3/0xa60 [drm] [ 761.993182] drm_atomic_commit+0x56/0xc0 [drm] [ 761.993192] ? drm_plane_get_damage_clips.cold+0x1c/0x1c [drm] [ 761.993204] drm_atomic_helper_set_config+0x78/0xc0 [drm_kms_helper] [ 761.993214] drm_mode_setcrtc+0x1ed/0x750 [drm] [ 761.993232] ? drm_mode_getcrtc+0x180/0x180 [drm] [ 761.993241] drm_ioctl_kernel+0xb5/0x150 [drm] [ 761.993252] drm_ioctl+0x203/0x3d0 [drm] [ 761.993261] ? drm_mode_getcrtc+0x180/0x180 [drm] [ 761.993276] __x64_sys_ioctl+0x8a/0xb0 [ 761.993281] do_syscall_64+0x38/0x90 [ 761.993285] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 761.993287] RIP: 0033:0x7f81e551aaff [ 761.993288] Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <41> 89 c0 3d 00 f0 ff ff 77 1f 48 8b 44 24 18 64 48 2b 04 25 28 00 [ 761.993290] RSP: 002b:00007fff4304af10 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 761.993292] RAX: ffffffffffffffda RBX: 00007fff4304afa0 RCX: 00007f81e551aaff [ 761.993293] RDX: 00007fff4304afa0 RSI: 00000000c06864a2 RDI: 0000000000000004 [ 761.993294] RBP: 00000000c06864a2 R08: 0000000000000000 R09: 0000555dac8a9c68 [ 761.993294] R10: 0000000000000000 R11: 0000000000000246 R12: 00000000000008c4 [ 761.993295] R13: 0000000000000004 R14: 0000555dac8a9c68 R15: 00007fff4304b098 [ 761.993301] </TASK> Fixes: 083351e96386 ("drm/display/dp_mst: Fix modeset tracking in drm_dp_atomic_release_vcpi_slots()") Testcase: igt@testdisplay Cc: Lyude Paul <lyude@redhat.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220907142542.1681994-1-imre.deak@intel.com
2022-09-08drm/panel-edp: Add Innolux N120ACA-EA1 panel entryChen-Yu Tsai1-0/+1
This panel has the same delay timing as N116BCA-EA1 from the same company, which is also the same as delay_200_500_e80_d50. Add an entry for it. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220908085454.1024167-2-wenst@chromium.org
2022-09-08drm/sun4i: tv: Merge mode_set into atomic_enableMaxime Ripard1-15/+10
Our mode_set implementation can be merged into our atomic_enable implementation to simplify things, so let's do this. Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220728-rpi-analog-tv-properties-v2-36-459522d653a7@cerno.tech
2022-09-08drm/i915: Set correct domains values at _i915_vma_move_to_activeNirmoy Das1-1/+2
Fix regression introduced by commit: "drm/i915: Individualize fences before adding to dma_resv obj" which sets obj->read_domains to 0 for both read and write paths. Also set obj->write_domain to 0 on read path which was removed by the commit. References: https://gitlab.freedesktop.org/drm/intel/-/issues/6639 Fixes: 420a07b841d0 ("drm/i915: Individualize fences before adding to dma_resv obj") Signed-off-by: Nirmoy Das <nirmoy.das@intel.com> Cc: <stable@vger.kernel.org> # v5.16+ Cc: Matthew Auld <matthew.auld@intel.com> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220907172641.12555-1-nirmoy.das@intel.com
2022-09-08drm/i915: Rename ggtt_view as gtt_viewNiranjana Vishwanathapura19-149/+149
So far, different views (normal, partial, rotated and remapped) into the same object are only supported for GGTT mappings. But with the upcoming VM_BIND feature, PPGTT will also use the partial view mapping. Hence rename ggtt_view to more generic gtt_view. Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220901183854.3446-1-niranjana.vishwanathapura@intel.com
2022-09-08drm/ssd130x: Replace simple display helpers with the atomic helpersJavier Martinez Canillas2-80/+189
The simple display pipeline is a set of helpers that can be used by DRM drivers to avoid dealing with all the needed components and just define a few functions to operate a simple display device with one full-screen scanout buffer feeding a single output. But it is arguable that this provides the correct level of abstraction for simple drivers, and recently some have been ported from using these simple display helpers to use the regular atomic helpers instead. The rationale for this is that the simple display pipeline helpers don't hide that much of the DRM complexity, while adding an indirection layer that conflates the concepts of CRTCs and planes. This makes the helpers less flexible and harder to be reused among different graphics drivers. Also, for simple drivers, using the full atomic helpers doesn't require a lot of additional code. So adding a simple display pipeline layer may not be worth it. For these reasons, let's follow that trend and make ssd130x a plain DRM driver that creates its own primary plane, CRTC, enconder and connector. Suggested-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220905222759.2597186-1-javierm@redhat.com
2022-09-07drm/amd/amdgpu: Add missing CGTS*TCC_DISABLE to 10.3 headersTom St Denis2-0/+14
The TCC_DISABLE registers were not included in the 10.3 headers and instead just placed directly in the gfx_v10_0.c source. This patch adds them to the headers so tools like umr can scan them and support them. Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-07drm/amdgpu: prevent toc firmware memory leakGuchun Chen1-2/+5
It's missed in psp fini. Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-07drm/amdgpu: correct doorbell range/size value for CSDMA_DOORBELL_RANGEYifan Zhang1-6/+0
current function mixes CSDMA_DOORBELL_RANGE and SDMA0_DOORBELL_RANGE range/size manipulation, while these 2 registers have difference size field mask. Remove range/size manipulation for SDMA0_DOORBELL_RANGE. Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by: Xiaojian Du <Xiaojian.Du@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-07drm/amdkfd: print address in hex format rather than decimalYifan Zhang1-1/+1
Addresses should be printed in hex format. Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-07drm/amd/display: Remove the unneeded result variablezhang songyi1-5/+1
Return the enable_link_dp() directly instead of storing it in another redundant variable. Reported-by: Zeal Robot <zealci@zte.com.cn> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: zhang songyi <zhang.songyi@zte.com.cn> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-07drm/amd/display: fix memory leak when using debugfs_lookup()Greg Kroah-Hartman1-0/+1
When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. Fix this up by properly calling dput(). Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Wayne Lin <Wayne.Lin@amd.com> Cc: hersen wu <hersenxs.wu@amd.com> Cc: Wenjing Liu <wenjing.liu@amd.com> Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: Thelford Williams <tdwilliamsiv@gmail.com> Cc: Fangzhi Zuo <Jerry.Zuo@amd.com> Cc: Yongzhi Liu <lyz_cs@pku.edu.cn> Cc: Mikita Lipski <mikita.lipski@amd.com> Cc: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Cc: Bhanuprakash Modem <bhanuprakash.modem@intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Cc: stable@vger.kernel.org Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-07drm/amd/pm: add missing SetMGpuFanBoostLimitRpm mapping for SMU 13.0.7Evan Quan1-0/+1
Missing SetMGpuFanBoostLimitRpm mapping leads to loading failure for SMU 13.0.7. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-07drm/amd/amdgpu: add rlc_firmware_header_v2_4 to amdgpu_firmware_headerChengming Gui1-0/+1
Add missing structure to avoid incorrect size and version check. Signed-off-by: Chengming Gui <Jack.Gui@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-07drm/amdgpu: TA unload messages are not actually sent to psp when amdgpu is ↵YiPeng Chai2-4/+3
uninstalled V1: The psp_cmd_submit_buf function is called by psp_hw_fini to send TA unload messages to psp to terminate ras, asd and tmr. But when amdgpu is uninstalled, drm_dev_unplug is called earlier than psp_hw_fini in amdgpu_pci_remove, the calling order as follows: static void amdgpu_pci_remove(struct pci_dev *pdev) { drm_dev_unplug ...... amdgpu_driver_unload_kms->amdgpu_device_fini_hw->... ->.hw_fini->psp_hw_fini->... ->psp_ta_unload->psp_cmd_submit_buf ...... } The program will return when calling drm_dev_enter in psp_cmd_submit_buf. So the call to drm_dev_enter in psp_cmd_submit_buf should be removed, so that the TA unload messages can be sent to the psp when amdgpu is uninstalled. V2: 1. Restore psp_cmd_submit_buf to its original code. 2. Move drm_dev_unplug call after amdgpu_driver_unload_kms in amdgpu_pci_remove. 3. Since amdgpu_device_fini_hw is called by amdgpu_driver_unload_kms, remove the unplug check to release device mmio resource in amdgpu_device_fini_hw before calling drm_dev_unplug. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-07drm/i915/uc: Add patch level version number supportJohn Harrison5-19/+47
With the move to un-versioned filenames, it becomes more difficult to know exactly what version of a given firmware is being used. So add the patch level version number to the debugfs output. Also, support matching by patch level when selecting code paths for firmware compatibility. While a patch level change cannot be backwards breaking, it is potentially possible that a new feature only works from a given patch level onwards (even though it was theoretically added in an earlier version that bumped the major or minor version). Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220906230147.479945-2-daniele.ceraolospurio@intel.com
2022-09-07drm/i915/uc: Support for version reduced and multiple firmware filesJohn Harrison5-186/+319
There was a misunderstanding in how firmware file compatibility should be managed within i915. This has been clarified as: i915 must support all existing firmware releases forever new minor firmware releases should replace prior versions only backwards compatibility breaking releases should be a new file This patch cleans up the single fallback file support that was added as a quick fix emergency effort. That is now removed in preference to supporting arbitrary numbers of firmware files per platform. The patch also adds support for having GuC firmware files that are named by major version only (because the major version indicates backwards breaking changes that affect the KMD) and for having HuC firmware files with no version number at all (because the KMD has no interface requirements with the HuC). For GuC, the driver will report via dmesg if the found file is older than expected. For HuC, the KMD will no longer require updating for any new HuC release so will not be able to report what the latest expected version is. Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220906230147.479945-1-daniele.ceraolospurio@intel.com
2022-09-07drm/gma500: fix repeated words in commentsJilin Yuan1-1/+1
Delete the redundant word 'for'. Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com> Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220907113927.35305-1-yuanjilin@cdjrlc.com
2022-09-07drm/qxl: fix the suspend/resume issue on qxl deviceZongmin Zhou1-1/+2
Details: Currently, when trying to suspend and resume with qxl device， there are some error messages after resuming, eventually caused to black screen and can't be recovered. The first error message: [ 64.668577][ C3] [drm] driver is in bug mode This error is due to guest qxl driver will call qxl_reinit_memslots(qdev) during system resume, but didn't call qxl_io_reset(qdev) before this, Then will cause the QXL_IO_MEMSLOT_ADD operation to fail on QEMU, qxl->guest_bug flag will be set，As a result, the QXL device can't communicate with guest qxl driver through the IO port. after fix the first error,can success to resume and login to desktop, but shortly after that will observe the second error message : [ 353.095343][ T863] qxl 0000:00:02.0: object_init failed for (262144, 0x00000001) [ 353.096660][ T863] [drm:qxl_gem_object_create [qxl]] *ERROR* Failed to allocate GEM object (260852, 1, 4096, -12) [ 353.097277][ T863] [drm:qxl_alloc_ioctl [qxl]] *ERROR* qxl_alloc_ioctl: failed to create gem ret=-12 [ 368.197538][ T863] qxl 0000:00:02.0: object_init failed for (3149824, 0x00000001) [ 368.197541][ T863] [drm:qxl_alloc_bo_reserved [qxl]] *ERROR* failed to allocate VRAM BO The problem is caused by calling qxl_ring_init_hdr(qdev->release_ring) in qxl_drm_resume() function. When do QXL_IO_RESET,QEMU will call init_qxl_ram(), so params like prod,cons,notify_on_cons and notify_on_prod will be set to default value. Ring push/pop actions for release_ring can be performed normally. But call qxl_ring_init_hdr(qdev->release_ring) will eventually set notify_on_prod to number of QXL_RELEASE_RING_SIZE, affect the value of notify in qxl_push_free_res() function always be false, QEMU will no longer send events of QXL_INTERRUPT_DISPLAY to the guest qxl driver，so qxl_ring_pop() will never been called anymore， and can't do dma_fence_signal(),result to ttm_bo_wait_ctx(bo, ctx) always return EBUSY,fail to call qxl_bo_create(). Test scenario: 1) start virtual machine with qemu command "-device qxl-vga" 2) click suspend botton to enter suspend mode 3) resume and observe the error message in kernel logs,screen will be black Let's fix this by reset io and remove the qxl_ring_init_hdr calling. Signed-off-by: Zongmin Zhou<zhouzongmin@kylinos.cn> Suggested-by: Ming Xie<xieming@kylinos.cn> Link: http://patchwork.freedesktop.org/patch/msgid/20220907094423.93581-1-min_halo@163.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2022-09-07drm/bochs: fix blankingGerd Hoffmann1-0/+2
VGA_IS1_RC is the color mode register (VGA_IS1_RM the one for monochrome mode, note C vs. M at the end). So when using VGA_IS1_RC make sure the vga device is actually in color mode and set the corresponding bit in the misc register. Reproducible when booting VMs in UEFI mode with some edk2 versions (edk2 fix is on the way too). Doesn't happen in BIOS mode because in that case the vgabios already flips the bit. Fixes: 250e743915d4 ("drm/bochs: Add screen blanking support") Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/20220906142957.2763577-1-kraxel@redhat.com
2022-09-07drm/virtio: set fb_modifiers_not_supportedChia-I Wu1-0/+2
Without this, the drm core advertises LINEAR modifier which is incorrect. Also userspace virgl does not support modifiers. For example, it causes chrome on ozone/drm to fail with "Failed to create scanout buffer". Fixes: 2af104290da5 ("drm: introduce fb_modifiers_not_supported flag in mode_config") Suggested-by: Shao-Chuan Lee <shaochuan@chromium.org> Signed-off-by: Chia-I Wu <olvaffe@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/20220831190601.1295129-1-olvaffe@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2022-09-07drm/sun4i: tv: Add missing reset assertionMaxime Ripard1-0/+1
The reset line is deasserted at bind, and asserted if we ever encounter an error there. However, it's never asserted in unbind which will lead to a resource unbalance. Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220728-rpi-analog-tv-properties-v2-40-459522d653a7@cerno.tech
2022-09-07drm/sun4i: tv: Rename error labelMaxime Ripard1-2/+2
The other error labels in sun4i_tv_bind() are named after the task they perform (err_disable_clk to call clk_disable_unprepare for example). However, the err_cleanup_connector is named after the calling site (drm_connector_init failing) and will actually cleanup the encoder. Let's rename it to err_cleanup_encoder to be consistent. Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220728-rpi-analog-tv-properties-v2-39-459522d653a7@cerno.tech
2022-09-07drm/sun4i: tv: Remove useless destroy functionMaxime Ripard1-7/+1
Our destroy implementation is just calling the generic helper, so let's just remove our function and directly use the helper. Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220728-rpi-analog-tv-properties-v2-38-459522d653a7@cerno.tech
2022-09-07drm/sun4i: tv: Remove useless functionMaxime Ripard1-7/+0
The drm_connector_to_sun4i_tv() function isn't used anywhere in the driver, so let's remove it. Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220728-rpi-analog-tv-properties-v2-37-459522d653a7@cerno.tech
2022-09-07drm/sun4i: tv: Convert to atomic hooksMaxime Ripard1-4/+6
The sun4i TV driver still uses legacy enable and disable hook implementation. Let's convert to the atomic variants. Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220728-rpi-analog-tv-properties-v2-35-459522d653a7@cerno.tech
2022-09-07drm/sun4i: tv: Remove unused mode_validMaxime Ripard1-8/+0
The mode_valid implementation is pretty much a nop, let's remove it. Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220728-rpi-analog-tv-properties-v2-34-459522d653a7@cerno.tech
2022-09-07drm/vc4: vec: Fix timings for VEC modesMateusz Kwiatkowski1-2/+2
This commit fixes vertical timings of the VEC (composite output) modes to accurately represent the 525-line ("NTSC") and 625-line ("PAL") ITU-R standards. Previous timings were actually defined as 502 and 601 lines, resulting in non-standard 62.69 Hz and 52 Hz signals being generated, respectively. Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com> Acked-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220728-rpi-analog-tv-properties-v2-28-459522d653a7@cerno.tech
2022-09-07drm/vc4: vec: Remove redundant atomic_mode_setMateusz Kwiatkowski1-14/+4
Let's remove the superfluous tv_mode field, which was redundant with the mode field in struct drm_tv_connector_state. Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com> Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220728-rpi-analog-tv-properties-v2-27-459522d653a7@cerno.tech
2022-09-07drm/vc4: vec: Refactor VEC TV mode settingMateusz Kwiatkowski1-65/+23
Change the mode_set function pointer logic to declarative config0, config1 and custom_freq fields, to make TV mode setting logic more concise and uniform. Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com> Reviewed-by: Noralf Trønnes <noralf@tronnes.org> [Maxime: Fixed != 0 check, added tv_mode variable] Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220728-rpi-analog-tv-properties-v2-26-459522d653a7@cerno.tech
2022-09-07drm/vc4: vec: Convert to atomic helpersMaxime Ripard1-4/+6
The VC4 VEC driver still uses legacy enable and disable hook implementation. Let's convert to the atomic variants. Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220728-rpi-analog-tv-properties-v2-25-459522d653a7@cerno.tech
2022-09-07drm/vc4: vec: Remove empty mode_fixupMaxime Ripard1-9/+0
The mode_fixup hooks are deprecated, and the behaviour we implement is the default one anyway. Let's remove it. Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220728-rpi-analog-tv-properties-v2-24-459522d653a7@cerno.tech
2022-09-07drm/ttm: Remove unnecessary '0' values from retLi zeming1-1/+1
The variable ret is assigned in the judgment branch statement, he does not need to initialize the assignment. Signed-off-by: Li zeming <zeming@nfschina.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220907032934.4490-1-zeming@nfschina.com Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
2022-09-07drm/via: Add new condition to via_dma_cleanup()Alisa Khabibrakhmanova1-1/+1
Pointer dev_priv->mmio, which was checked for NULL at via_do_init_map(), is passed to via_do_cleanup_map() and is dereferenced there without check. The patch adds the condition in via_dma_cleanup() which prevents potential NULL pointer dereference. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 22f579c621e2 ("drm: Add via unichrome support") Signed-off-by: Alisa Khabibrakhmanova <khabibrakhmanova@ispras.ru> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220729090643.240778-1-khabibrakhmanova@ispras.ru
2022-09-06drm/panel-edp: Fix typo in kerneldoc comment (appers=>appears)Douglas Anderson1-1/+1
Ever since I got the spell-check working in my editor this one has been bugging me. Fix it. Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220720162314.1.Ieef5bc3848df40b71605b70bb571d6429e8978de@changeid
2022-09-06drm/i915: Don't try to disable host RPS when this was never enabled.Rodrigo Vivi1-0/+3
Specially in GT reset case this could be triggered and try to disable things that had never been enabled. Let's add some protection here. Cc: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Acked-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220902095126.373036-1-rodrigo.vivi@intel.com
2022-09-06drm/scheduler: quieten kernel-doc warningsRandy Dunlap2-5/+7
Fix kernel-doc warnings in gpu_scheduler.h and sched_main.c. Quashes these warnings: include/drm/gpu_scheduler.h:332: warning: missing initial short description on line: * struct drm_sched_backend_ops include/drm/gpu_scheduler.h:412: warning: missing initial short description on line: * struct drm_gpu_scheduler include/drm/gpu_scheduler.h:461: warning: Function parameter or member 'dev' not described in 'drm_gpu_scheduler' drivers/gpu/drm/scheduler/sched_main.c:201: warning: missing initial short description on line: * drm_sched_dependency_optimized drivers/gpu/drm/scheduler/sched_main.c:995: warning: Function parameter or member 'dev' not described in 'drm_sched_init' Fixes: 2d33948e4e00 ("drm/scheduler: add documentation") Fixes: 8ab62eda177b ("drm/sched: Add device pointer to drm_gpu_scheduler") Fixes: 542cff7893a3 ("drm/sched: Avoid lockdep spalt on killing a processes") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Cc: Nayan Deshmukh <nayan26deshmukh@gmail.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Jiawei Gu <Jiawei.Gu@amd.com> Cc: dri-devel@lists.freedesktop.org Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220404213040.12912-1-rdunlap@infradead.org
2022-09-06drm/bridge: anx7625: Set HPD irq detect window to 2msXin Ji2-0/+20
Some panels trigger HPD irq due to noise, the HPD debounce may be 1.8ms, exceeding the default irq detect window, ~1.4ms. This patch set HPD irq detection window to 2ms to tolerate the HPD noise. Signed-off-by: Xin Ji <xji@analogixsemi.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220903130833.541463-1-xji@analogixsemi.com
2022-09-06Merge tag 'drm-misc-next-2022-08-20-1' of ↵Daniel Vetter478-14656/+16283
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v6.1: UAPI Changes: Cross-subsystem Changes: - DMA-buf: documentation updates. - Assorted small fixes to vga16fb - Fix fbdev drivers to use the aperture helpers. - Make removal of conflicting drivers work correctly without fbdev enabled. Core Changes: - bridge, scheduler, dp-mst: Assorted small fixes. - Add more format helpers to fourcc, and use it to replace the cpp usage. - Add DRM_FORMAT_Cxx, DRM_FORMAT_Rxx (single channel), and DRM_FORMAT_Dxx ("darkness", inverted single channel) - Add packed AYUV8888 and XYUV8888 formats. - Assorted documentation updates. - Rename ttm_bo_init to ttm_bo_init_validate. - Allow TTM bo's to exist without backing store. - Convert drm selftests to kunit. - Add managed init functions for (panel) bridge, crtc, encoder and connector. - Fix endianness handling in various format conversion helpers. - Make tests pass on big-endian platforms, and add test for rgb888 -> rgb565 - Move DRM_PLANE_HELPER_NO_SCALING to atomic helpers and rename, so drm_plane_helper is no longer needed in most drivers. - Use idr_init_base instead of idr_init. - Rename FB and GEM CMA helpers to DMA helpers. - Rework XRGB8888 related conversion helpers, and add drm_fb_blit() that takes a iosys_map. Make drm_fb_memcpy take an iosys_map too. - Move edid luminance calculation to core, and use it in i915. Driver Changes: - bridge/{adv7511,ti-sn65dsi86,parade-ps8640}, panel/{simple,nt35510,tc358767}, nouveau, sun4i, mipi-dsi, mgag200, bochs, arm, komeda, vmwgfx, pl111: Assorted small fixes and doc updates. - vc4: Rework hdmi power up, and depend on PM. - panel/simple: Add Samsung LTL101AL01. - ingenic: Add JZ4760(B) support, avoid a modeset when sharpness property is unchanged, and use the new PM ops. - Revert some amdgpu commits that cause garbaged graphics when starting X, and reapply them with the real problem fixed. - Completely rework vc4 init to use managed helpers. - Rename via_drv to via_dri1, and move all stuff there only used by the dri1 implementation in preperation for atomic modeset. - Use regmap bulk write in ssd130x. - Power sequence and clock updates to it6505. - Split panel-sitrox-st7701 init sequence and rework mode programming code. - virtio: Improve error and edge conditions handling, and convert to use managed helpers. - Add Samsung LTL101AL01, B120XAN01.0, R140NWF5 RH, DMT028VGHMCMI-1A T, panels. - Add generic fbdev support to komeda. - Split mgag200 modeset handling to make it more model-specific. - Convert simpledrm to use atomic helpers. - Improve udl suspend/disconnect handling. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/f0c71766-61e8-19b7-763a-5fbcdefc633d@linux.intel.com
2022-09-06drm/i915: consider HAS_FLAT_CCS() in needs_ccs_pagesMatthew Auld2-1/+4
Just move the HAS_FLAT_CCS() check into needs_ccs_pages. This also then fixes i915_ttm_memcpy_allowed() which was incorrectly reporting true on DG1, even though it doesn't have small-BAR or flat-CCS. References: https://gitlab.freedesktop.org/drm/intel/-/issues/6605 Fixes: efeb3caf4341 ("drm/i915/ttm: disallow CPU fallback mode for ccs pages") Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220905105329.41455-1-matthew.auld@intel.com
2022-09-05drm: vkms: Add support to the RGB565 formatIgor Torrente3-3/+76
This commit also adds new helper macros to deal with fixed-point arithmetic. It was done to improve the precision of the conversion to ARGB16161616 since the "conversion ratio" is not an integer. V3: Adapt the handlers to the new format introduced in patch 7 V3. V5: Minor improvements V6: Minor improvements (Pekka Paalanen) Reviewed-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Igor Torrente <igormtorrente@gmail.com> Signed-off-by: Melissa Wen <melissa.srw@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220905190811.25024-10-igormtorrente@gmail.com
2022-09-05drm: vkms: Adds XRGB_16161616 and ARGB_1616161616 formatsIgor Torrente3-1/+82
This will be useful to write tests that depends on these formats. ARGB and XRGB follows the a similar implementation of the former formats. Just adjusting for 16 bits per channel. V3: Adapt the handlers to the new format introduced in patch 7 V3. V5: Minor improvements Added le16_to_cpu/cpu_to_le16 to the 16 bits color read/writes. Reviewed-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Igor Torrente <igormtorrente@gmail.com> Signed-off-by: Melissa Wen <melissa.srw@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220905190811.25024-9-igormtorrente@gmail.com
2022-09-05drm: vkms: Supports to the case where primary plane doesn't match the CRTCIgor Torrente3-33/+33
We will remove the current assumption that the primary plane has the same size and position as CRTC and that the primary plane is the bottom-most in zpos order, or is even enabled. At least as far as the blending machinery is concerned. For that we will add CRTC dimension information to `vkms_crtc_state` and add a opaque black backgound color. Because now we need to fill the background, we had a loss in performance with this change. Results running the IGT[1] test `igt@kms_cursor_crc@pipe-a-cursor-512x512-onscreen` ten times: | Frametime | |:--------------------------------------------:| | Implementation | Previous | This commit | |:---------------:|:---------:|:--------------:| | frametime range | 5~18 ms | 10~22 ms | | Average | 8.47 ms | 12.32 ms | [1] IGT commit id: bc3f6833a12221a46659535dac06ebb312490eb4 V6: Improve the commit description (Pekka Paalanen). Update some comments (Pekka Paalanen). Remove some fields from `vkms_crtc_state` and move where some variables are set (Pekka Paalanen). Reviewed-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Igor Torrente <igormtorrente@gmail.com> Signed-off-by: Melissa Wen <melissa.srw@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220905190811.25024-8-igormtorrente@gmail.com
2022-09-05drm: vkms: Refactor the plane composer to accept new formatsIgor Torrente7-182/+318
Currently the blend function only accepts XRGB_8888 and ARGB_8888 as a color input. This patch refactors all the functions related to the plane composition to overcome this limitation. The pixels blend is done using the new internal format. And new handlers are being added to convert a specific format to/from this internal format. So the blend operation depends on these handlers to convert to this common format. The blended result, if necessary, is converted to the writeback buffer format. This patch introduces three major differences to the blend function. 1 - All the planes are blended at once. 2 - The blend calculus is done as per line instead of per pixel. 3 - It is responsible to calculates the CRC and writing the writeback buffer(if necessary). These changes allow us to allocate way less memory in the intermediate buffer to compute these operations. Because now we don't need to have the entire intermediate image lines at once, just one line is enough. | Memory consumption (output dimensions) | |:--------------------------------------:| | Current | This patch | |:------------------:|:-----------------:| | Width * Heigth | 2 * Width | Beyond memory, we also have a minor performance benefit from all these changes. Results running the IGT[1] test `igt@kms_cursor_crc@pipe-a-cursor-512x512-onscreen` ten times: | Frametime | |:------------------------------------------:| | Implementation | Current | This commit | |:---------------:|:---------:|:------------:| | frametime range | 9~22 ms | 5~17 ms | | Average | 11.4 ms | 7.8 ms | [1] IGT commit id: bc3f6833a12221a46659535dac06ebb312490eb4 V2: Improves the performance drastically, by performing the operations per-line and not per-pixel(Pekka Paalanen). Minor improvements(Pekka Paalanen). V3: Changes the code to blend the planes all at once. This improves performance, memory consumption, and removes much of the weirdness of the V2(Pekka Paalanen and me). Minor improvements(Pekka Paalanen and me). V4: Rebase the code and adapt it to the new NUM_OVERLAY_PLANES constant. V5: Minor checkpatch fixes and the removal of TO-DO item(Melissa Wen). Several security/robustness improvents(Pekka Paalanen). Removes check_planes_x_bounds function and allows partial partly off-screen(Pekka Paalanen). V6: Fix a mismatch of some variable sizes (Pekka Paalanen). Several minor improvements (Pekka Paalanen). Reviewed-by: Melissa Wen <mwen@igalia.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Igor Torrente <igormtorrente@gmail.com> Signed-off-by: Melissa Wen <melissa.srw@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220905190811.25024-7-igormtorrente@gmail.com
2022-09-05drm: vkms: Add fb information to `vkms_writeback_job`Igor Torrente2-8/+35
This commit is the groundwork to introduce new formats to the planes and writeback buffer. As part of it, a new buffer metadata field is added to `vkms_writeback_job`, this metadata is represented by the `vkms_frame_info` struct. Also adds two new function pointers (`line_to_frame_func` and `frame_to_line_func`) are defined to handle format conversion from/to internal format. A new internal format(`struct pixel_argb_u16`) is introduced to deal with all possible inputs. It consists of 16 bits fields that represent each of the channels. These things will allow us, in the future, to have different compositing and wb format types. V2: Change the code to get the drm_framebuffer reference and not copy its contents (Thomas Zimmermann). V3: Drop the refcount in the wb code (Thomas Zimmermann). V5: Add {wb,plane}_format_transform_func to vkms_writeback_job and vkms_plane_state (Pekka Paalanen) V6: Improvements to some struct/struct members names (Pekka Paalanen). Splits this patch in two (Pekka Paalanen). V7: Replace line_to_frame_func and frame_to_line_func typedefs with the function signature and void* (Melissa Wen). Reviewed-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Igor Torrente <igormtorrente@gmail.com> Signed-off-by: Melissa Wen <melissa.srw@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220905190811.25024-6-igormtorrente@gmail.com
2022-09-05drm: vkms: get the reference to `drm_framebuffer` instead if coping itIgor Torrente3-8/+8
Instead of coping `drm_framebuffer` - which can cause problems - we just get the reference and add the ref count. Reviewed-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Igor Torrente <igormtorrente@gmail.com> Signed-off-by: Melissa Wen <melissa.srw@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220905190811.25024-5-igormtorrente@gmail.com
2022-09-05drm: drm_atomic_helper: Add a new helper to deal with the writeback ↵Igor Torrente3-5/+46
connector validation Add a helper function to validate the connector configuration received in the encoder atomic_check by the drivers. So the drivers don't need to do these common validations themselves. V2: Move the format verification to a new helper at the drm_atomic_helper.c (Thomas Zimmermann). V3: Format check improvements (Leandro Ribeiro). Minor improvements(Thomas Zimmermann). V5: Fix some grammar issues in the commit message (André Almeida). Reviewed-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Igor Torrente <igormtorrente@gmail.com> Signed-off-by: Melissa Wen <melissa.srw@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220905190811.25024-4-igormtorrente@gmail.com
2022-09-05drm: vkms: Rename `vkms_composer` to `vkms_frame_info`Igor Torrente3-65/+66
Changes the name of this struct to a more meaningful name. A name that represents better what this struct is about. Composer is the code that do the compositing of the planes. This struct contains information on the frame used in the output composition. Thus, vkms_frame_info is a better name to represent this. V5: Fix a commit message typo(Melissa Wen). V6: Fix wrong iosys_map_is_null verification at compose_plane (Melissa Wen). Reviewed-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Igor Torrente <igormtorrente@gmail.com> Signed-off-by: Melissa Wen <melissa.srw@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220905190811.25024-3-igormtorrente@gmail.com
2022-09-05drm: vkms: Replace hardcoded value of `vkms_composer.map` to ↵Igor Torrente1-1/+1
DRM_FORMAT_MAX_PLANES The `map` vector at `vkms_composer` uses a hardcoded value to define its size. If someday the maximum number of planes increases, this hardcoded value can be a problem. This value is being replaced with the DRM_FORMAT_MAX_PLANES macro. Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Igor Torrente <igormtorrente@gmail.com> Signed-off-by: Melissa Wen <melissa.srw@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220905190811.25024-2-igormtorrente@gmail.com
Powered by cgit, Gruvboxed by Blaster4385.