aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-09-28x86/xen: Support kexec/kdump in HVM guests by doing a soft resetVitaly Kuznetsov2-0/+31
Currently there is a number of issues preventing PVHVM Xen guests from doing successful kexec/kdump: - Bound event channels. - Registered vcpu_info. - PIRQ/emuirq mappings. - shared_info frame after XENMAPSPACE_shared_info operation. - Active grant mappings. Basically, newly booted kernel stumbles upon already set up Xen interfaces and there is no way to reestablish them. In Xen-4.7 a new feature called 'soft reset' is coming. A guest performing kexec/kdump operation is supposed to call SCHEDOP_shutdown hypercall with SHUTDOWN_soft_reset reason before jumping to new kernel. Hypervisor (with some help from toolstack) will do full domain cleanup (but keeping its memory and vCPU contexts intact) returning the guest to the state it had when it was first booted and thus allowing it to start over. Doing SHUTDOWN_soft_reset on Xen hypervisors which don't support it is probably OK as by default all unknown shutdown reasons cause domain destroy with a message in toolstack log: 'Unknown shutdown reason code 5. Destroying domain.' which gives a clue to what the problem is and eliminates false expectations. Signed-off-by: Vitaly Kuznetsov <[email protected]> Cc: <[email protected]> Signed-off-by: David Vrabel <[email protected]>
2015-09-28xen/x86: Don't try to write syscall-related MSRs for PV guestsBoris Ostrovsky1-0/+1
For PV guests these registers are set up by hypervisor and thus should not be written by the guest. The comment in xen_write_msr_safe() says so but we still write the MSRs, causing the hypervisor to print a warning. Signed-off-by: Boris Ostrovsky <[email protected]> Reviewed-by: Konrad Rzeszutek Wilk <[email protected]> Signed-off-by: David Vrabel <[email protected]>
2015-09-28xen: use correct type for HYPERVISOR_memory_op()Juergen Gross2-3/+3
HYPERVISOR_memory_op() is defined to return an "int" value. This is wrong, as the Xen hypervisor will return "long". The sub-function XENMEM_maximum_reservation returns the maximum number of pages for the current domain. An int will overflow for a domain configured with 8TB of memory or more. Correct this by using the correct type. Signed-off-by: Juergen Gross <[email protected]> Signed-off-by: David Vrabel <[email protected]>
2015-09-28Revert "KVM: x86: zero kvmclock_offset when vcpu0 initializes kvmclock ↵Radim Krčmář2-4/+1
system MSR" Shifting pvclock_vcpu_time_info.system_time on write to KVM system time MSR is a change of ABI. Probably only 2.6.16 based SLES 10 breaks due to its custom enhancements to kvmclock, but KVM never declared the MSR only for one-shot initialization. (Doc says that only one write is needed.) This reverts commit b7e60c5aedd2b63f16ef06fde4f81ca032211bc5. And adds a note to the definition of PVCLOCK_COUNTS_FROM_ZERO. Signed-off-by: Radim Krčmář <[email protected]> Acked-by: Marcelo Tosatti <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2015-09-28watchdog: iTCO: Fix dependencies on I2CGuenter Roeck1-1/+2
If I2C is built as module, the iTCO watchdog driver must be built as module as well. I2C_I801 must only be selected if I2C is configured. This fixes the following build errors, seen if I2C=m and ITCO_WDT=y. i2c-i801.c:(.text+0x2bf055): undefined reference to `i2c_del_adapter' i2c-i801.c:(.text+0x2c13e0): undefined reference to `i2c_add_adapter' i2c-i801.c:(.text+0x2c17bd): undefined reference to `i2c_new_device' Fixes: 2a7a0e9bf7b3 ("watchdog: iTCO_wdt: Add support for TCO on Intel Sunrisepoint") Reviewed-by: Matt Fleming <[email protected]> Cc: Lee Jones <[email protected]> Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: Wim Van Sebroeck <[email protected]>
2015-09-28watchdog: bcm2835: Fix poweroff behaviourNoralf Trønnes1-2/+8
Currently poweroff/halt results in a reboot on the Raspberry Pi. The firmware uses the RSTS register to know which partiton to boot from. The partiton value is spread into bits 0, 2, 4, 6, 8, 10. Partiton 63 is a special partition used by the firmware to indicate halt. The firmware made this change in 19 Aug 2013 and was matched by the downstream commit: Changes for new NOOBS multi partition booting from gsh Signed-off-by: Noralf Trønnes <[email protected]> Tested-by: Stephen Warren <[email protected]> Acked-by: Stephen Warren <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Signed-off-by: Wim Van Sebroeck <[email protected]>
2015-09-28watchdog: Fix module autoload for OF platform driverLuis de Bethencourt3-0/+3
These platform drivers have a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Signed-off-by: Wim Van Sebroeck <[email protected]>
2015-09-28drm/i915/skl: Don't call intel_prepare_ddi when encoder list isn't yet ↵Rodrigo Vivi1-1/+2
initialized. In case something goes wrong with power well initialization we were calling intel_prepare_ddi during boot while encoder list isnt't initilized. [ 9.618747] i915 0000:00:02.0: Invalid ROM contents [ 9.631446] [drm] failed to find VBIOS tables [ 9.720036] BUG: unable to handle kernel NULL pointer dereference at 00000000 00000058 [ 9.721986] IP: [<ffffffffa014eb72>] ddi_get_encoder_port+0x82/0x190 [i915] [ 9.723736] PGD 0 [ 9.724286] Oops: 0000 [#1] PREEMPT SMP [ 9.725386] Modules linked in: intel_powerclamp snd_hda_intel(+) coretemp crc 32c_intel snd_hda_codec snd_hda_core serio_raw snd_pcm snd_timer i915(+) parport _pc parport pinctrl_sunrisepoint pinctrl_intel nfsd nfs_acl [ 9.730635] CPU: 0 PID: 497 Comm: systemd-udevd Not tainted 4.3.0-rc2-eywa-10 967-g72de2cfd-dirty #2 [ 9.732785] Hardware name: Intel Corporation Cannonlake Client platform/Skyla ke DT DDR4 RVP8, BIOS CNLSE2R1.R00.X021.B00.1508040310 08/04/2015 [ 9.735785] task: ffff88008a704700 ti: ffff88016a1ac000 task.ti: ffff88016a1a c000 [ 9.737584] RIP: 0010:[<ffffffffa014eb72>] [<ffffffffa014eb72>] ddi_get_enco der_port+0x82/0x190 [i915] [ 9.739934] RSP: 0000:ffff88016a1af710 EFLAGS: 00010296 [ 9.741184] RAX: 000000000000004e RBX: ffff88008a9edc98 RCX: 0000000000000001 [ 9.742934] RDX: 000000000000004e RSI: ffffffff81fc1e82 RDI: 00000000ffffffff [ 9.744634] RBP: ffff88016a1af730 R08: 0000000000000000 R09: 0000000000000578 [ 9.746333] R10: 0000000000001065 R11: 0000000000000578 R12: fffffffffffffff8 [ 9.748033] R13: ffff88016a1af7a8 R14: ffff88016a1af794 R15: 0000000000000000 [ 9.749733] FS: 00007eff2e1e07c0(0000) GS:ffff88016fc00000(0000) knlGS:00000 00000000000 [ 9.751683] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9.753083] CR2: 0000000000000058 CR3: 000000016922b000 CR4: 00000000003406f0 [ 9.754782] Stack: [ 9.755332] ffff88008a9edc98 ffff88008a9ed800 ffffffffa01d07b0 00000000fffb9 09e [ 9.757232] ffff88016a1af7d8 ffffffffa0154ea7 0000000000000246 ffff88016a370 080 [ 9.759182] ffff88016a370080 ffff88008a9ed800 0000000000000246 ffff88008a9ed c98 [ 9.761132] Call Trace: [ 9.761782] [<ffffffffa0154ea7>] intel_prepare_ddi+0x67/0x860 [i915] [ 9.763332] [<ffffffff81a56996>] ? _raw_spin_unlock_irqrestore+0x26/0x40 [ 9.765031] [<ffffffffa00fad01>] ? gen9_read32+0x141/0x360 [i915] [ 9.766531] [<ffffffffa00b43e1>] skl_set_power_well+0x431/0xa80 [i915] [ 9.768181] [<ffffffffa00b4a63>] skl_power_well_enable+0x13/0x20 [i915] [ 9.769781] [<ffffffffa00b2188>] intel_power_well_enable+0x28/0x50 [i915] [ 9.771481] [<ffffffffa00b4d52>] intel_display_power_get+0x92/0xc0 [i915] [ 9.773180] [<ffffffffa00b4fcb>] intel_display_set_init_power+0x3b/0x40 [i91 5] [ 9.774980] [<ffffffffa00b5170>] intel_power_domains_init_hw+0x120/0x520 [i9 15] [ 9.776780] [<ffffffffa0194c61>] i915_driver_load+0xb21/0xf40 [i915] So let's protect this case. My first attempt was to remove the intel_prepare_ddi, but Daniel had pointed out this is really needed to restore those registers values. And Imre pointed out that this case was without the flag protection and this was actually where things were going bad. So I've just checked and this indeed solves my issue. The regressing intel_prepare_ddi call was added in commit 1d2b9526a790d55b7ae870934a74937081f62de2 Author: Damien Lespiau <[email protected]> Date: Fri Mar 6 18:50:53 2015 +0000 drm/i915/skl: Restore the DDI translation tables when enabling PW1 Cc: Imre Deak <[email protected]> Cc: Daniel Vetter <[email protected]> Signed-off-by: Rodrigo Vivi <[email protected]> Reviewed-by: Imre Deak <[email protected]> [Jani: regression reference] Signed-off-by: Jani Nikula <[email protected]>
2015-09-28m68k/defconfig: Update defconfigs for v4.3-rc1Geert Uytterhoeven12-12/+96
Signed-off-by: Geert Uytterhoeven <[email protected]>
2015-09-28m68k: Define asmlinkage_protectAndreas Schwab1-0/+30
Make sure the compiler does not modify arguments of syscall functions. This can happen if the compiler generates a tailcall to another function. For example, without asmlinkage_protect sys_openat is compiled into this function: sys_openat: clr.l %d0 move.w 18(%sp),%d0 move.l %d0,16(%sp) jbra do_sys_open Note how the fourth argument is modified in place, modifying the register %d4 that gets restored from this stack slot when the function returns to user-space. The caller may expect the register to be unmodified across system calls. Signed-off-by: Andreas Schwab <[email protected]> Signed-off-by: Geert Uytterhoeven <[email protected]> Cc: [email protected]
2015-09-28m68k: Wire up membarrierGeert Uytterhoeven3-1/+3
$ ./membarrier_test membarrier MEMBARRIER_CMD_QUERY syscall available. membarrier: MEMBARRIER_CMD_SHARED success. membarrier: tests done! $ Signed-off-by: Geert Uytterhoeven <[email protected]> Acked-by: Greg Ungerer <[email protected]>
2015-09-28m68k: Wire up userfaultfdGeert Uytterhoeven3-1/+3
$ ./userfaultfd 10 99 nr_pages: 2560, nr_pages_per_cpu: 2560 bounces: 98, mode: racing, userfaults: 1121 bounces: 97, mode: rnd, userfaults: 977 bounces: 96, mode:, userfaults: 1119 bounces: 95, mode: rnd racing ver poll, userfaults: 1040 bounces: 94, mode: racing ver poll, userfaults: 1022 bounces: 93, mode: rnd ver poll, userfaults: 946 bounces: 92, mode: ver poll, userfaults: 1115 bounces: 91, mode: rnd racing poll, userfaults: 977 bounces: 90, mode: racing poll, userfaults: 899 bounces: 89, mode: rnd poll, userfaults: 881 bounces: 88, mode: poll, userfaults: 1069 bounces: 87, mode: rnd racing ver, userfaults: 1114 bounces: 86, mode: racing ver, userfaults: 1109 bounces: 85, mode: rnd ver, userfaults: 1165 bounces: 84, mode: ver, userfaults: 1107 bounces: 83, mode: rnd racing, userfaults: 1134 bounces: 82, mode: racing, userfaults: 1105 bounces: 81, mode: rnd, userfaults: 1323 bounces: 80, mode:, userfaults: 1103 bounces: 79, mode: rnd racing ver poll, userfaults: 909 bounces: 78, mode: racing ver poll, userfaults: 1095 bounces: 77, mode: rnd ver poll, userfaults: 951 bounces: 76, mode: ver poll, userfaults: 1099 bounces: 75, mode: rnd racing poll, userfaults: 1035 bounces: 74, mode: racing poll, userfaults: 1097 bounces: 73, mode: rnd poll, userfaults: 1159 bounces: 72, mode: poll, userfaults: 1042 bounces: 71, mode: rnd racing ver, userfaults: 848 bounces: 70, mode: racing ver, userfaults: 1093 bounces: 69, mode: rnd ver, userfaults: 892 bounces: 68, mode: ver, userfaults: 1091 bounces: 67, mode: rnd racing, userfaults: 1219 bounces: 66, mode: racing, userfaults: 1089 bounces: 65, mode: rnd, userfaults: 988 bounces: 64, mode:, userfaults: 1087 bounces: 63, mode: rnd racing ver poll, userfaults: 882 bounces: 62, mode: racing ver poll, userfaults: 984 bounces: 61, mode: rnd ver poll, userfaults: 701 bounces: 60, mode: ver poll, userfaults: 1071 bounces: 59, mode: rnd racing poll, userfaults: 1137 bounces: 58, mode: racing poll, userfaults: 1032 bounces: 57, mode: rnd poll, userfaults: 911 bounces: 56, mode: poll, userfaults: 1079 bounces: 55, mode: rnd racing ver, userfaults: 1106 bounces: 54, mode: racing ver, userfaults: 1077 bounces: 53, mode: rnd ver, userfaults: 886 bounces: 52, mode: ver, userfaults: 1075 bounces: 51, mode: rnd racing, userfaults: 1101 bounces: 50, mode: racing, userfaults: 1073 bounces: 49, mode: rnd, userfaults: 1070 bounces: 48, mode:, userfaults: 1071 bounces: 47, mode: rnd racing ver poll, userfaults: 1077 bounces: 46, mode: racing ver poll, userfaults: 910 bounces: 45, mode: rnd ver poll, userfaults: 1063 bounces: 44, mode: ver poll, userfaults: 1028 bounces: 43, mode: rnd racing poll, userfaults: 1043 bounces: 42, mode: racing poll, userfaults: 1065 bounces: 41, mode: rnd poll, userfaults: 912 bounces: 40, mode: poll, userfaults: 1063 bounces: 39, mode: rnd racing ver, userfaults: 880 bounces: 38, mode: racing ver, userfaults: 1061 bounces: 37, mode: rnd ver, userfaults: 1144 bounces: 36, mode: ver, userfaults: 1059 bounces: 35, mode: rnd racing, userfaults: 967 bounces: 34, mode: racing, userfaults: 1057 bounces: 33, mode: rnd, userfaults: 1076 bounces: 32, mode:, userfaults: 1055 bounces: 31, mode: rnd racing ver poll, userfaults: 997 bounces: 30, mode: racing ver poll, userfaults: 1053 bounces: 29, mode: rnd ver poll, userfaults: 968 bounces: 28, mode: ver poll, userfaults: 978 bounces: 27, mode: rnd racing poll, userfaults: 1008 bounces: 26, mode: racing poll, userfaults: 1049 bounces: 25, mode: rnd poll, userfaults: 900 bounces: 24, mode: poll, userfaults: 1047 bounces: 23, mode: rnd racing ver, userfaults: 988 bounces: 22, mode: racing ver, userfaults: 1045 bounces: 21, mode: rnd ver, userfaults: 1027 bounces: 20, mode: ver, userfaults: 1043 bounces: 19, mode: rnd racing, userfaults: 1017 bounces: 18, mode: racing, userfaults: 1041 bounces: 17, mode: rnd, userfaults: 979 bounces: 16, mode:, userfaults: 1039 bounces: 15, mode: rnd racing ver poll, userfaults: 1134 bounces: 14, mode: racing ver poll, userfaults: 1037 bounces: 13, mode: rnd ver poll, userfaults: 1046 bounces: 12, mode: ver poll, userfaults: 1035 bounces: 11, mode: rnd racing poll, userfaults: 1060 bounces: 10, mode: racing poll, userfaults: 1033 bounces: 9, mode: rnd poll, userfaults: 1003 bounces: 8, mode: poll, userfaults: 929 bounces: 7, mode: rnd racing ver, userfaults: 964 bounces: 6, mode: racing ver, userfaults: 1029 bounces: 5, mode: rnd ver, userfaults: 1053 bounces: 4, mode: ver, userfaults: 1027 bounces: 3, mode: rnd racing, userfaults: 863 bounces: 2, mode: racing, userfaults: 1025 bounces: 1, mode: rnd, userfaults: 1043 bounces: 0, mode:, userfaults: 950 Signed-off-by: Geert Uytterhoeven <[email protected]> Acked-by: Greg Ungerer <[email protected]>
2015-09-28m68k: Wire up direct socket callsGeert Uytterhoeven3-2/+35
Signed-off-by: Geert Uytterhoeven <[email protected]> Acked-by: Greg Ungerer <[email protected]>
2015-09-28Merge branch 'for-mingo' of ↵Ingo Molnar2-6/+10
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/urgent Pull RCU fixes from Paul E. McKenney, for two regressions introduced in this merge window: - Fix bug with recent GCCs. - Fix false positive lockdep splat. Signed-off-by: Ingo Molnar <[email protected]>
2015-09-27Input: serio - fix blocking of parportSudip Mukherjee1-0/+1
If parkbd_allocate_serio() fails to allocate memory we are releasing the parport but we missed unregistering the device. As a result this device with exclusive access to that parport remains registered. And no other device will be able to use that parport even though this driver has failed to load. Signed-off-by: Sudip Mukherjee <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2015-09-27Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds14-81/+290
Pull MIPS fixes from Ralf Baechle: - Properly setup irq handling for ATH79 platforms - Fix bootmem mapstart calculation for contiguous maps - Handle little endian and older CPUs correct in BPF - Fix console for Fulong 2E systems - Handle FTLB correctly on R6 CPUs - Fixes for CM, GIC and MAAR support code * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Initialise MAARs on secondary CPUs MIPS: print MAAR configuration during boot MIPS: mm: compile maar_init unconditionally irqchip: mips-gic: Fix pending & mask reads for MIPS64 with 32b GIC. irqchip: mips-gic: Convert CPU numbers to VP IDs. MIPS: CM: Provide a function to map from CPU to VP ID. MIPS: Fix FTLB detection for R6 MIPS: cpu-features: Add cpu_has_ftlb MIPS: ATH79: Add irq chip ar7240-misc-intc MIPS: ATH79: Set missing irq ack handler for ar7100-misc-intc irq chip MIPS: BPF: Fix build on pre-R2 little endian CPUs MIPS: BPF: Avoid unreachable code on little endian MIPS: bootmem: Fix mapstart calculation for contiguous maps MIPS: Fix console output for Fulong2e system
2015-09-27Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds18-96/+214
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Thomas Gleixner: "Another pile of fixes for perf: - Plug overflows and races in the core code - Sanitize the flow of the perf syscall so we error out before handling the more complex and hard to undo setups - Improve and fix Broadwell and Skylake hardware support - Revert a fix which broke what it tried to fix in perf tools - A couple of smaller fixes in various places of perf tools" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tools: Fix copying of /proc/kcore perf intel-pt: Remove no_force_psb from documentation perf probe: Use existing routine to look for a kernel module by dso->short_name perf/x86: Change test_aperfmperf() and test_intel() to static tools lib traceevent: Fix string handling in heterogeneous arch environments perf record: Avoid infinite loop at buildid processing with no samples perf: Fix races in computing the header sizes perf: Fix u16 overflows perf: Restructure perf syscall point of no return perf/x86/intel: Fix Skylake FRONTEND MSR extrareg mask perf/x86/intel/pebs: Add PEBS frontend profiling for Skylake perf/x86/intel: Make the CYCLE_ACTIVITY.* constraint on Broadwell more specific perf tools: Bool functions shouldn't return -1 tools build: Add test for presence of __get_cpuid() gcc builtin tools build: Add test for presence of numa_num_possible_cpus() in libnuma Revert "perf symbols: Fix mismatched declarations for elf_getphdrnum" perf stat: Fix per-pkg event reporting bug
2015-09-27Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds1-3/+11
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Thomas Gleixner: "A single bug fix for the scheduler to prevent dequeueing of the idle task when setting the cpus allowed mask" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Fix crash trying to dequeue/enqueue the idle thread
2015-09-27Merge branch 'locking-urgent-for-linus' of ↵Linus Torvalds1-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fix from Thomas Gleixner: "A single bugfix for lockdep to preserve the pinning counter when rebuilding the lock stack" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/lockdep: Fix hlock->pin_count reset on lock stack rebuilds
2015-09-27Merge branch 'turbostat' of ↵Rafael J. Wysocki1-5/+34
https://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux into pm-tools Pull turbostat updates for v4.3 from Len Brown. * 'turbostat' of https://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbosat: update version number tools/power turbostat: SKL: Adjust for TSC difference from base frequency tools/power turbostat: KNL workaround for %Busy and Avg_MHz tools/power turbostat: IVB Xeon: fix --debug regression
2015-09-27Merge branch 'cpuidle' of ↵Rafael J. Wysocki1-2/+10
https://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux into pm-cpuidle Pull an intel_idle update for v4.3 from Len Brown. * 'cpuidle' of https://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: intel_idle: Skylake Client Support - updated
2015-09-27MIPS: Initialise MAARs on secondary CPUsPaul Burton3-3/+36
MAARs should be initialised on each CPU (or rather, core) in the system in order to achieve consistent behaviour & performance. Previously they have only been initialised on the boot CPU which leads to performance problems if tasks are later scheduled on a secondary CPU, particularly if those tasks make use of unaligned vector accesses where some CPUs don't handle any cases in hardware for non-speculative memory regions. Fix this by recording the MAAR configuration from the boot CPU and applying it to secondary CPUs as part of their bringup. Reported-by: Doug Gilmore <[email protected]> Signed-off-by: Paul Burton <[email protected]> Cc: [email protected] Cc: Rusty Russell <[email protected]> Cc: Steven J. Hill <[email protected]> Cc: Andrew Bresticker <[email protected]> Cc: Bjorn Helgaas <[email protected]> Cc: David Hildenbrand <[email protected]> Cc: [email protected] Cc: Aaro Koskinen <[email protected]> Cc: James Hogan <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Markos Chandras <[email protected]> Cc: Hemmo Nieminen <[email protected]> Cc: Alex Smith <[email protected]> Cc: Peter Zijlstra (Intel) <[email protected]> Patchwork: https://patchwork.linux-mips.org/patch/11239/ Signed-off-by: Ralf Baechle <[email protected]>
2015-09-27MIPS: print MAAR configuration during bootPaul Burton1-0/+29
Verifying that the MAAR configuration is as expected is useful when debugging the performance of a system. Print out the memory regions configured via MAAR along with their attributes. Signed-off-by: Paul Burton <[email protected]> Cc: [email protected] Cc: Steven J. Hill <[email protected]> Cc: David Hildenbrand <[email protected]> Cc: [email protected] Cc: Peter Zijlstra (Intel) <[email protected]> Patchwork: https://patchwork.linux-mips.org/patch/11238/ Signed-off-by: Ralf Baechle <[email protected]>
2015-09-27MIPS: mm: compile maar_init unconditionallyPaul Burton1-63/+63
maar_init was previously only compiled when CONFIG_NEED_MULTIPLE_NODES was not set, which has been fine since it is only called from the standard implementation of mem_init which has the same condition. In preparation for calling it from the SMP startup code on secondary CPUs, move maar_init outside of the #ifndef such that it is always compiled. Signed-off-by: Paul Burton <[email protected]> Cc: Markos Chandras <[email protected]> Cc: [email protected] Cc: Steven J. Hill <[email protected]> Cc: David Hildenbrand <[email protected]> Cc: [email protected] Cc: Ingo Molnar <[email protected]> Patchwork: https://patchwork.linux-mips.org/patch/11237/ Signed-off-by: Ralf Baechle <[email protected]>
2015-09-27irqchip: mips-gic: Fix pending & mask reads for MIPS64 with 32b GIC.Paul Burton1-0/+8
gic_handle_shared_int reads the GIC interrupt pending & mask registers directly into a bitmap, which is defined as an array of unsigned longs. The GIC pending registers may be 32 bits wide if the CM is older than CM3, regardless of the bit width of the CPU, but for MIPS64 kernels the unsigned longs in the bitmap will be 64 bits wide. In this case we need to perform 2 x 32 bit reads per 64 bit unsigned long in order to avoid missing interrupts. Signed-off-by: Paul Burton <[email protected]> Acked-by: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: Marc Zyngier <[email protected]> Cc: Jason Cooper <[email protected]> Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/11213/ Signed-off-by: Ralf Baechle <[email protected]>
2015-09-27irqchip: mips-gic: Convert CPU numbers to VP IDs.Paul Burton1-2/+2
Make use of the mips_cm_vp_id function to convert from Linux CPU numbers to the VP IDs used by hardware, which are not identical in all systems. Without doing so we map interrupts to incorrect VP(E)s. Signed-off-by: Paul Burton <[email protected]> Acked-by: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: Paul Burton <[email protected]> Cc: Marc Zyngier <[email protected]> Cc: Jason Cooper <[email protected]> Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/11212/ Signed-off-by: Ralf Baechle <[email protected]>
2015-09-27MIPS: CM: Provide a function to map from CPU to VP ID.Paul Burton1-0/+39
The VP ID of a given CPU may not match up with the CPU number used by Linux. For example, if the width of the VP part of the VP ID is wider than log2(number of VPs per core) and the system has multiple cores then this will be the case. Alternatively, if a pre-r6 system implements the MT ASE with multiple VPEs per core and Linux is built without support for the MT ASE then the numbers won't match up either. Provide a function to convert from CPU number to VP ID. Signed-off-by: Paul Burton <[email protected]> Acked-by: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: [email protected] Cc: James Hogan <[email protected]> Cc: Markos Chandras <[email protected]> Patchwork: https://patchwork.linux-mips.org/patch/11211/ Signed-off-by: Ralf Baechle <[email protected]>
2015-09-27Linux 4.3-rc3Linus Torvalds1-1/+1
2015-09-27Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds2-5/+27
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "Two bugfixes from Andy addressing at least some of the subtle NMI related wreckage which has been reported by Sasha Levin" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/nmi/64: Fix a paravirt stack-clobbering bug in the NMI code x86/paravirt: Replace the paravirt nop with a bona fide empty function
2015-09-27Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds1-8/+16
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Thomass Gleixner: "A bugfix for the atmel aic5 irq chip driver which caches the wrong data and thereby breaking resume" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/atmel-aic5: Use per chip mask caches in mask/unmask()
2015-09-27Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds4-6/+30
Pull ARM fixes from Russell King: "Just two fixes: wire up the new system calls added during the last merge window, and fix another user access site" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: alignment: fix alignment handling for uaccess changes ARM: wire up new syscalls
2015-09-27Merge tag 'armsoc-fixes' of ↵Linus Torvalds34-162/+278
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Our first real batch of fixes this release cycle. Nothing really concerning, and diffstat is a bit inflated due to some DT contents moving around on STi platforms. There's a collection of them here: - A fixup for a build breakage that hits on arm64 allmodconfig in QCOM SCM firmware drivers - MMC fixes for OMAP that had quite a bit of breakage this merge window. - Misc build/warning fixes on PXA and OMAP - A couple of minor fixes for Beagleboard X15 which is now starting to see a few more users in the wild" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits) ARM: sti: dt: adapt DT to fix probe/bind issues in DRM driver ARM: dts: fix omap2+ address translation for pbias firmware: qcom: scm: Add function stubs for ARM64 ARM: dts: am57xx-beagle-x15: use palmas-usb for USB2 ARM: omap2plus_defconfig: enable GPIO_PCA953X ARM: dts: omap5-uevm.dts: fix i2c5 pinctrl offsets ARM: OMAP2+: AM43XX: Enable autoidle for clks in am43xx_init_late ARM: dts: am57xx-beagle-x15: Update Phy supplies ARM: pxa: balloon3: Fix build error ARM: dts: Fixup model name for HP t410 dts ARM: dts: DRA7: fix a typo in ethernet ARM: omap2plus_defconfig: make PCF857x built-in ARM: dts: Use ti,pbias compatible string for pbias ARM: OMAP5: Cleanup options for SoC only build ARM: DRA7: Select missing options for SoC only build ARM: OMAP2+: board-generic: Remove stale of_irq macros ARM: OMAP4+: PM: erratum is used by OMAP5 and DRA7 as well ARM: dts: omap3-igep: Move eth IRQ pinmux to IGEPv2 common dtsi ARM: dts: am57xx-beagle-x15: Add wakeup irq for mcp79410 ARM: dts: am335x-phycore-som: Fix mpu voltage ...
2015-09-27Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds3-19/+126
Pull CIFS fixes from Steve French: "Four fixes from testing at the recent SMB3 Plugfest including two important authentication ones (one fixes authentication problems to some popular servers when clock times differ more than two hours between systems, the other fixes Kerberos authentication for SMB3)" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: fix encryption error checks on mount [SMB3] Fix sec=krb5 on smb3 mounts cifs: use server timestamp for ntlmv2 authentication disabling oplocks/leases via module parm enable_oplocks broken for SMB3
2015-09-26r8169: fix handling rtl_readphy resultAndrzej Hajda1-1/+1
The function can return negative value. The problem has been detected using proposed semantic patch scripts/coccinelle/tests/assign_signed_to_unsigned.cocci [1]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2046107 Signed-off-by: Andrzej Hajda <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-09-26net: hisilicon: fix handling platform_get_irq resultAndrzej Hajda1-1/+1
The function can return negative value. The problem has been detected using proposed semantic patch scripts/coccinelle/tests/assign_signed_to_unsigned.cocci [1]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2046107 Signed-off-by: Andrzej Hajda <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-09-26Merge tag 'pxa-fixes-v4.3' of https://github.com/rjarzmik/linux into fixesOlof Johansson4-3/+28
ARM: pxa: fixes for v4.3 These fixes are mainly regression fixes triggered by irq changes, common clock framework introduction and sound side-effect of other platforms. * tag 'pxa-fixes-v4.3' of https://github.com/rjarzmik/linux: ARM: pxa: balloon3: Fix build error ARM: pxa: ssp: Fix build error by removing originally incorrect DT binding ARM: pxa: fix DFI bus lockups on startup Signed-off-by: Olof Johansson <[email protected]>
2015-09-26Merge tag 'omap-for-v4.3/fixes-rc2' of ↵Olof Johansson16-46/+119
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Fixes for omaps for v4.3-rc cycle: - Two more patches to fix most of the MMC regressions with the PBIAS regulator changes. At least two MMC driver related issues still seems to remain for omap3 legacy booting and omap4 duovero. Note that the dts changes depend on a recent regulator fix, and are based on the regulator commit now in mainline kernel - Enable autoidle for am43xx clocks to prevent clocks from staying always on - Fix i2c5 pinctrl offsets for omap5-uevm - Enable PCA953X as that's needed for HDMI to work on omap5 - Update phy supplies for beagle x15 beta board - Use palmas-usb for on beagle x15 to start using the related driver that recently got merged * tag 'omap-for-v4.3/fixes-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: fix omap2+ address translation for pbias ARM: dts: am57xx-beagle-x15: use palmas-usb for USB2 ARM: omap2plus_defconfig: enable GPIO_PCA953X ARM: dts: omap5-uevm.dts: fix i2c5 pinctrl offsets ARM: OMAP2+: AM43XX: Enable autoidle for clks in am43xx_init_late ARM: dts: am57xx-beagle-x15: Update Phy supplies regulator: pbias: program pbias register offset in pbias driver ARM: omap2plus_defconfig: Enable MUSB DMA support ARM: DRA752: Add ID detect for ES2.0 ARM: OMAP3: vc: fix 'or' always true warning ARM: OMAP2+: Fix booting if no timer parent clock is available ARM: OMAP2+: omap-device: fix race deferred probe of omap_hsmmc vs omap_device_late_init Signed-off-by: Olof Johansson <[email protected]>
2015-09-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds5-12/+40
Pull crypto fixes from Herbert Xu: "This fixes the following issues: - check the return value of platform_get_irq as signed int in xgene. - skip adf_dev_restore on virtual functions in qat. - fix double-free with backlogged requests in marvell_cesa" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: hwrng: xgene - fix handling platform_get_irq crypto: qat - VF should never trigger SBR on PH crypto: marvell - properly handle CRYPTO_TFM_REQ_MAY_BACKLOG-flagged requests
2015-09-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds9-166/+299
Pull SCSI target fixes from Nicholas Bellinger: "This includes a iser-target series from Jenny + Sagi @ Mellanox that addresses the few remaining active I/O shutdown bugs, along with a patch to support zero-copy for immediate data payloads that gives a nice performance improvement for small block WRITEs. Also included are some recent >= v4.2 regression bug-fixes. The most notable is a RCU conversion regression for SPC-3 PR registrations, and recent removal of obsolete RFC-3720 markers that introduced a login regression bug with MSFT iSCSI initiators. Thanks to everyone who has been testing + reporting bugs for v4.x" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: iscsi-target: Avoid OFMarker + IFMarker negotiation target: Make TCM_WRITE_PROTECT failure honor D_SENSE bit target: Fix target_sense_desc_format NULL pointer dereference target: Propigate backend read-only to core_tpg_add_lun target: Fix PR registration + APTPL RCU conversion regression iser-target: Skip data copy if all the command data comes as immediate iser-target: Change the recv buffers posting logic iser-target: Fix pending connections handling in target stack shutdown sequnce iser-target: Remove np_ prefix from isert_np members iser-target: Remove unused variables iser-target: Put the reference on commands waiting for unsol data iser-target: remove command with state ISTATE_REMOVE
2015-09-26Merge tag 'usb-4.3-rc3' of ↵Linus Torvalds29-177/+288
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some USB driver fixes for 4.3-rc3. There's the usual assortment of new device ids, combined with xhci and gadget driver fixes. Full details in the shortlog. All of these have been in linux-next with no reported problems" * tag 'usb-4.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (34 commits) MAINTAINERS: remove amd5536udc USB gadget driver maintainer USB: whiteheat: fix potential null-deref at probe xhci: init command timeout timer earlier to avoid deleting it uninitialized xhci: change xhci 1.0 only restrictions to support xhci 1.1 usb: xhci: exit early in xhci_setup_device() if we're halted or dying usb: xhci: stop everything on the first call to xhci_stop usb: xhci: Clear XHCI_STATE_DYING on start usb: xhci: lock mutex on xhci_stop xhci: Move xhci_pme_quirk() behind #ifdef CONFIG_PM xhci: give command abortion one more chance before killing xhci usb: Use the USB_SS_MULT() macro to get the burst multiplier. usb: dwc3: gadget: Fix BUG in RT config usb: musb: fix cppi channel teardown for isoch transfer usb: phy: isp1301: Export I2C module alias information usb: gadget: drop null test before destroy functions usb: gadget: dummy_hcd: in transfer(), return data sent, not limit usb: gadget: dummy_hcd: fix rescan logic for transfer usb: gadget: dummy_hcd: fix unneeded else-if condition usb: gadget: dummy_hcd: emulate sending zlp in packet logic usb: musb: dsps: fix polling in device-only mode ...
2015-09-26Merge tag 'tty-4.3-rc3' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull serial driver fix from Greg KH: "Here is one serial driver fix for 4.3-rc3 that resolves a module loading issue due to splitting up of the 8250 driver into smaller pieces. It's been in linux-next with no reported problems" * tag 'tty-4.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: serial: Add missing module license for 8250_base.ko
2015-09-26Merge tag 'staging-4.3-rc3' of ↵Linus Torvalds15-47/+66
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fixes from Greg KH: "Here are some tiny staging driver and documentation fixes for 4.3-rc3. All of these resolve reported issues that people have found and have been in the linux-next tree for a while with no problems" * tag 'staging-4.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: MAINTAINERS: Update email address for Martyn Welch staging: ion: fix corruption of ion_import_dma_buf staging: dgap: Remove myself from the MAINTAINERS file staging: most: Add dependency to HAS_IOMEM staging: unisys: remove reference of visorutil staging: unisys: visornic: handle error return from device registration staging: unisys: stop device registration before visorbus registration staging: unisys: visorbus: Unregister driver on error staging: unisys: visornic: Fix receive bytes statistics staging: unisys: unregister netdev when create debugfs fails staging: fbtft: replace master->setup() with spi_setup() staging: fbtft: fix 9-bit SPI support detection staging/lustre: change Lustre URLs and mailing list staging/android: Update ION TODO per LPC discussion Staging: most: MOST and MOSTCORE should depend on HAS_DMA staging: most: fix HDM_USB dependencies and build errors
2015-09-26Merge tag 'driver-core-4.3-rc3' of ↵Linus Torvalds1-2/+8
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fix from Greg KH: "Here is one driver core fix for 4.3-rc3 that resolves a reported oops" * tag 'driver-core-4.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: cpu/cacheinfo: Fix teardown path
2015-09-26Merge tag 'char-misc-4.3-rc3' of ↵Linus Torvalds4-3/+21
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here's some tiny char and misc driver fixes that resolve some reported errors for 4.3-rc3. All of these have been in linux-next with no problems for a while" * tag 'char-misc-4.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: extcon: Fix attached value returned by is_extcon_changed Drivers: hv: vmbus: fix init_vp_index() for reloading hv_netvsc mei: fix debugfs files leak on error path thunderbolt: Allow loading of module on recent Apple MacBooks with thunderbolt 2 controller
2015-09-26[SMB3] Missing null tcon checkSteve French1-1/+1
Pointed out by Dan Carpenter via smatch code analysis tool CC: Dan Carpenter <[email protected]> Signed-off-by: Steve French <[email protected]>
2015-09-26tools/power turbosat: update version numberLen Brown1-1/+1
Signed-off-by: Len Brown <[email protected]>
2015-09-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds117-639/+1697
Pull networking fixes from David Miller: 1) When we run a tap on netlink sockets, we have to copy mmap'd SKBs instead of cloning them. From Daniel Borkmann. 2) When converting classical BPF into eBPF, fix the setting of the source reg to BPF_REG_X. From Tycho Andersen. 3) Fix igmpv3/mldv2 report parsing in the bridge multicast code, from Linus Lussing. 4) Fix dst refcounting for ipv6 tunnels, from Martin KaFai Lau. 5) Set NLM_F_REPLACE flag properly when replacing ipv6 routes, from Roopa Prabhu. 6) Add some new cxgb4 PCI device IDs, from Hariprasad Shenai. 7) Fix headroom tests and SKB leaks in ipv6 fragmentation code, from Florian Westphal. 8) Check DMA mapping errors in bna driver, from Ivan Vecera. 9) Several 8139cp bug fixes (dev_kfree_skb_any in interrupt context, misclearing of interrupt status in TX timeout handler, etc.) from David Woodhouse. 10) In tipc, reset SKB header pointer after skb_linearize(), from Erik Hugne. 11) Fix autobind races et al. in netlink code, from Herbert Xu with help from Tejun Heo and others. 12) Missing SET_NETDEV_DEV in sunvnet driver, from Sowmini Varadhan. 13) Fix various races in timewait timer and reqsk_queue_hadh_req, from Eric Dumazet. 14) Fix array overruns in mac80211, from Johannes Berg and Dan Carpenter. 15) Fix data race in rhashtable_rehash_one(), from Dmitriy Vyukov. 16) Fix race between poll_one_napi and napi_disable, from Neil Horman. 17) Fix byte order in geneve tunnel port config, from John W Linville. 18) Fix handling of ARP replies over lightweight tunnels, from Jiri Benc. 19) We can loop when fib rule dumps cross multiple SKBs, fix from Wilson Kok and Roopa Prabhu. 20) Several reference count handling bug fixes in the PHY/MDIO layer from Russel King. 21) Fix lockdep splat in ppp_dev_uninit(), from Guillaume Nault. 22) Fix crash in icmp_route_lookup(), from David Ahern. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits) net: Fix panic in icmp_route_lookup net: update docbook comment for __mdiobus_register() ppp: fix lockdep splat in ppp_dev_uninit() net: via/Kconfig: GENERIC_PCI_IOMAP required if PCI not selected phy: marvell: add link partner advertised modes net: fix net_device refcounting phy: add phy_device_remove() phy: fixed-phy: properly validate phy in fixed_phy_update_state() net: fix phy refcounting in a bunch of drivers of_mdio: fix MDIO phy device refcounting phy: add proper phy struct device refcounting phy: fix mdiobus module safety net: dsa: fix of_mdio_find_bus() device refcount leak phy: fix of_mdio_find_bus() device refcount leak ip6_tunnel: Reduce log level in ip6_tnl_err() to debug ip6_gre: Reduce log level in ip6gre_err() to debug fib_rules: fix fib rule dumps across multiple skbs bnx2x: byte swap rss_key to comply to Toeplitz specs net: revert "net_sched: move tp->root allocation into fw_init()" lwtunnel: remove source and destination UDP port config option ...
2015-09-26Merge tag 'perf-urgent-for-mingo' of ↵Ingo Molnar3-43/+20
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: - Fix copying of /proc/kcore made to the ~/.debug/ DSO cache to allow using objdump with kcore files. (Adrian Hunter) - Fix adding perf probes in kernel module functions. (Arnaldo Carvalho de Melo) Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2015-09-26tools/power turbostat: SKL: Adjust for TSC difference from base frequencyLen Brown1-2/+20
On a Skylake with 1500MHz base frequency, the TSC runs at 1512MHz. This is because the TSC is no longer in the n*100 MHz BCLK domain, but is now in the m*24MHz crystal clock domain. (24 MHz * 63 = 1512 MHz) This adds error to several calculations in turbostat, unless the TSC sample sizes are adjusted for this difference. Note that calculations in the time domain are immune from this issue, as the timing sub-system has already calibrated the TSC against a known wall clock. AVG_MHz = APERF_delta/measurement_interval need no adjustment. APERF_delta is in the BCLK domain, and measurement_interval is in the time domain. TSC_MHz = TSC_delta/measurement_interval needs no adjustment -- as we really do want to report the actual measured TSC delta here, and measurement_interval is in the accurate time domain. %Busy = MPERF_delta/TSC_delta needs adjustment to use TSC_BCLK_DOMAIN_delta. TSC_BCLK_DOMAIN_delta = TSC_delta * base_hz / tsc_hz Bzy_MHz = TSC_delta/APERF_delta/MPERF_delta/measurement_interval need adjustment as above. No other metrics in turbostat need to be adjusted. Before: CPU Avg_MHz %Busy Bzy_MHz TSC_MHz - 550 24.84 2216 1512 0 2191 98.73 2219 1514 2 0 0.01 2130 1512 1 9 0.43 2016 1512 3 2 0.08 2016 1512 After: CPU Avg_MHz %Busy Bzy_MHz TSC_MHz - 550 25.05 2198 1512 0 2190 99.62 2199 1512 2 0 0.01 2152 1512 1 9 0.46 2000 1512 3 2 0.10 2000 1512 Note that in this example, the "Before" Bzy_MHz was reported as exceeding the 2200 max turbo rate. Also, even a pinned spin loop would not be reported as over 99% busy. Signed-off-by: Len Brown <[email protected]>
2015-09-26tools/power turbostat: KNL workaround for %Busy and Avg_MHzHubert Chrzaniuk1-0/+13
KNL increments APERF and MPERF every 1024 clocks. This is compliant with the architecture specification, which requires that only the ratio of APERF/MPERF need be valid. However, turbostat takes advantage of the fact that these two MSRs increment every un-halted clock at the actual and base frequency: AVG_MHz = APERF_delta/measurement_interval %Busy = MPERF_delta/TSC_delta This quirk is needed for these calculations to also work on KNL, which would otherwise show a value 1024x smaller than expected. Signed-off-by: Hubert Chrzaniuk <[email protected]> Signed-off-by: Len Brown <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.