| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This reverts commit 31fae7c8b18c3f8029a2a5dce97a3182c1a167a0.
Tony writes:
I just noticed this causes the following regression in Linux
next when pressing a key on uart console after boot at least on
omap3. This seems to happen on serial_port_in(port, UART_RX) in
the quirk handling.
So let's drop this.
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Fixes: 31fae7c8b18c ("serial: 8250: 8250_omap: Fix possible interrupt storm")
Reported-by: Tony Lindgren <[email protected]>
Cc: Jan Kiszka <[email protected]>
Cc: Vignesh Raghavendra <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Interrupt handler processes multiple message write requests one after
another, till the driver message queue is drained. However if driver
encounters a read message without preceding START, it stops the I2C
transfer as it is an invalid condition for the controller. At least the
comment describes a requirement "the controller forces us to send a new
START when we change direction". This stop results in clearing the
message queue (i2c->msg = NULL).
The code however immediately jumped back to label "retry_write" which
dereferenced the "i2c->msg" making it a possible NULL pointer
dereference.
The Coverity analysis:
1. Condition !is_msgend(i2c), taking false branch.
if (!is_msgend(i2c)) {
2. Condition !is_lastmsg(i2c), taking true branch.
} else if (!is_lastmsg(i2c)) {
3. Condition i2c->msg->flags & 1, taking true branch.
if (i2c->msg->flags & I2C_M_RD) {
4. write_zero_model: Passing i2c to s3c24xx_i2c_stop, which sets i2c->msg to NULL.
s3c24xx_i2c_stop(i2c, -EINVAL);
5. Jumping to label retry_write.
goto retry_write;
6. var_deref_model: Passing i2c to is_msgend, which dereferences null i2c->msg.
if (!is_msgend(i2c)) {"
All previous calls to s3c24xx_i2c_stop() in this interrupt service
routine are followed by jumping to end of function (acknowledging
the interrupt and returning). This seems a reasonable choice also here
since message buffer was entirely emptied.
Addresses-Coverity: Explicit null dereferenced
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
The i2c controller driver do dma reset after transfer timeout,
but sometimes dma reset will trigger an unexpected DMA_ERR irq.
It will cause the i2c controller to continuously send interrupts
to the system and cause soft lock-up. So we need to disable i2c
start_en and clear intr_stat to stop i2c controller before dma
reset when transfer timeout.
Fixes: aafced673c06("i2c: mediatek: move dma reset before i2c reset")
Signed-off-by: Qii Wang <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
ssh://git.freedesktop.org/git/drm/drm-intel into drm-fixes
drm/i915 fixes for v5.13-rc4:
- Re-enable LTTPR non-transparent LT mode for DPCD_REV<1.4
Signed-off-by: Dave Airlie <[email protected]>
From: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
ssh://git.freedesktop.org/git/drm/drm-misc into drm-fixes
A fix in meson for a crash at shutdown and one for TTM to prevent
irrelevant swapout
Signed-off-by: Dave Airlie <[email protected]>
From: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20210527120828.3w7f53krzkslc4ii@gilmour
|
|
It seems the bpf_program__attach() returns a negative error code instead
of a NULL pointer in case of error.
Fixes: 7fac83aaf2ee ("perf stat: Introduce 'bperf' to share hardware PMCs with BPF")
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-5.13-2021-05-26:
amdgpu:
- MultiGPU fan fix
- VCN powergating fixes
amdkfd:
- Fix SDMA register offset error
Signed-off-by: Dave Airlie <[email protected]>
From: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following patchset contains Netfilter/IPVS fixes for net:
1) Fix incorrect sockopts unregistration from error path,
from Florian Westphal.
2) A few patches to provide better error reporting when missing kernel
netfilter options are missing in .config.
3) Fix dormant table flag updates.
4) Memleak in IPVS when adding service with IP_VS_SVC_F_HASHED flag.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
ipvs: ignore IP_VS_SVC_F_HASHED flag when adding service
netfilter: nf_tables: fix table flag updates
netfilter: nf_tables: extended netlink error reporting for chain type
netfilter: nf_tables: missing error reporting for not selected expressions
netfilter: conntrack: unregister ipv4 sockopts on error unwind
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu
Pull percpu fixes from Dennis Zhou:
"This contains a cleanup to lib/percpu-refcount.c and an update to the
MAINTAINERS file to more formally take over support for lib/percpu*"
* 'for-5.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
MAINTAINERS: Add lib/percpu* as part of percpu entry
percpu_ref: Don't opencode percpu_ref_is_dying
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Don't use contiguous or block mappings for the linear map when KFENCE
is enabled.
- Fix link in the arch_counter_enforce_ordering() comment.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mm: don't use CON and BLK mapping if KFENCE is enabled
arm64: Fix stale link in the arch_counter_enforce_ordering() comment
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM verity target's 'require_signatures' module_param permissions.
- Revert DM snapshot fix from v5.13-rc3 and then properly fix crash
when an origin has no snapshots. This allows only the proper fix to
go to stable@ (since the original fix was successfully dropped).
* tag 'for-5.13/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm snapshot: properly fix a crash when an origin has no snapshots
dm snapshot: revert "fix a crash when an origin has no snapshots"
dm verity: fix require_signatures module_param permissions
|
|
Fix current behavior of skipping template allocation in case the
ct action is in zone 0.
Skipping the allocation may cause the datapath ct code to ignore the
entire ct action with all its attributes (commit, nat) in case the ct
action in zone 0 was preceded by a ct clear action.
The ct clear action sets the ct_state to untracked and resets the
skb->_nfct pointer. Under these conditions and without an allocated
ct template, the skb->_nfct pointer will remain NULL which will
cause the tc ct action handler to exit without handling commit and nat
actions, if such exist.
For example, the following rule in OVS dp:
recirc_id(0x2),ct_state(+new-est-rel-rpl+trk),ct_label(0/0x1), \
in_port(eth0),actions:ct_clear,ct(commit,nat(src=10.11.0.12)), \
recirc(0x37a)
Will result in act_ct skipping the commit and nat actions in zone 0.
The change removes the skipping of template allocation for zone 0 and
treats it the same as any other zone.
Fixes: b57dc7c13ea9 ("net/sched: Introduce action ct")
Signed-off-by: Ariel Levkovich <[email protected]>
Acked-by: Marcelo Ricardo Leitner <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Currently established connections are not offloaded if the filter has a
"ct commit" action. This behavior will not offload connections of the
following scenario:
$ tc_filter add dev $DEV ingress protocol ip prio 1 flower \
ct_state -trk \
action ct commit action goto chain 1
$ tc_filter add dev $DEV ingress protocol ip chain 1 prio 1 flower \
action mirred egress redirect dev $DEV2
$ tc_filter add dev $DEV2 ingress protocol ip prio 1 flower \
action ct commit action goto chain 1
$ tc_filter add dev $DEV2 ingress protocol ip prio 1 chain 1 flower \
ct_state +trk+est \
action mirred egress redirect dev $DEV
Offload established connections, regardless of the commit flag.
Fixes: 46475bb20f4b ("net/sched: act_ct: Software offload of established flows")
Reviewed-by: Oz Shlomo <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Acked-by: Marcelo Ricardo Leitner <[email protected]>
Signed-off-by: Paul Blakey <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Physical port name, port number attributes do not belong to virtual port
flavour. When VF or SF virtual ports are registered they incorrectly
append "np0" string in the netdevice name of the VF/SF.
Before this fix, VF netdevice name were ens2f0np0v0, ens2f0np0v1 for VF
0 and 1 respectively.
After the fix, they are ens2f0v0, ens2f0v1.
With this fix, reading /sys/class/net/ens2f0v0/phys_port_name returns
-EOPNOTSUPP.
Also devlink port show example for 2 VFs on one PF to ensure that any
physical port attributes are not exposed.
$ devlink port show
pci/0000:06:00.0/65535: type eth netdev ens2f0np0 flavour physical port 0 splittable false
pci/0000:06:00.3/196608: type eth netdev ens2f0v0 flavour virtual splittable false
pci/0000:06:00.4/262144: type eth netdev ens2f0v1 flavour virtual splittable false
This change introduces a netdevice name change on systemd/udev
version 245 and higher which honors phys_port_name sysfs file for
generation of netdevice name.
This also aligns to phys_port_name usage which is limited to switchdev
ports as described in [1].
[1] https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/tree/Documentation/networking/switchdev.rst
Fixes: acf1ee44ca5d ("devlink: Introduce devlink port flavour virtual")
Signed-off-by: Parav Pandit <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
There are a few cases where cloning an inline extent requires copying data
into a page of the destination inode. For these cases we are allocating
the required data and metadata space while holding a leaf locked. This can
result in a deadlock when we are low on available space because allocating
the space may flush delalloc and two deadlock scenarios can happen:
1) When starting writeback for an inode with a very small dirty range that
fits in an inline extent, we deadlock during the writeback when trying
to insert the inline extent, at cow_file_range_inline(), if the extent
is going to be located in the leaf for which we are already holding a
read lock;
2) After successfully starting writeback, for non-inline extent cases,
the async reclaim thread will hang waiting for an ordered extent to
complete if the ordered extent completion needs to modify the leaf
for which the clone task is holding a read lock (for adding or
replacing file extent items). So the cloning task will wait forever
on the async reclaim thread to make progress, which in turn is
waiting for the ordered extent completion which in turn is waiting
to acquire a write lock on the same leaf.
So fix this by making sure we release the path (and therefore the leaf)
every time we need to copy the inline extent's data into a page of the
destination inode, as by that time we do not need to have the leaf locked.
Fixes: 05a5a7621ce66c ("Btrfs: implement full reflink support for inline extents")
CC: [email protected] # 5.10+
Signed-off-by: Filipe Manana <[email protected]>
Signed-off-by: David Sterba <[email protected]>
|
|
When doing a series of partial writes to different ranges of preallocated
extents with transaction commits and fsyncs in between, we can end up with
a checksum items in a log tree. This causes an fsync to fail with -EIO and
abort the transaction, turning the filesystem to RO mode, when syncing the
log.
For this to happen, we need to have a full fsync of a file following one
or more fast fsyncs.
The following example reproduces the problem and explains how it happens:
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt
# Create our test file with 2 preallocated extents. Leave a 1M hole
# between them to ensure that we get two file extent items that will
# never be merged into a single one. The extents are contiguous on disk,
# which will later result in the checksums for their data to be merged
# into a single checksum item in the csums btree.
#
$ xfs_io -f \
-c "falloc 0 1M" \
-c "falloc 3M 3M" \
/mnt/foobar
# Now write to the second extent and leave only 1M of it as unwritten,
# which corresponds to the file range [4M, 5M[.
#
# Then fsync the file to flush delalloc and to clear full sync flag from
# the inode, so that a future fsync will use the fast code path.
#
# After the writeback triggered by the fsync we have 3 file extent items
# that point to the second extent we previously allocated:
#
# 1) One file extent item of type BTRFS_FILE_EXTENT_REG that covers the
# file range [3M, 4M[
#
# 2) One file extent item of type BTRFS_FILE_EXTENT_PREALLOC that covers
# the file range [4M, 5M[
#
# 3) One file extent item of type BTRFS_FILE_EXTENT_REG that covers the
# file range [5M, 6M[
#
# All these file extent items have a generation of 6, which is the ID of
# the transaction where they were created. The split of the original file
# extent item is done at btrfs_mark_extent_written() when ordered extents
# complete for the file ranges [3M, 4M[ and [5M, 6M[.
#
$ xfs_io -c "pwrite -S 0xab 3M 1M" \
-c "pwrite -S 0xef 5M 1M" \
-c "fsync" \
/mnt/foobar
# Commit the current transaction. This wipes out the log tree created by
# the previous fsync.
sync
# Now write to the unwritten range of the second extent we allocated,
# corresponding to the file range [4M, 5M[, and fsync the file, which
# triggers the fast fsync code path.
#
# The fast fsync code path sees that there is a new extent map covering
# the file range [4M, 5M[ and therefore it will log a checksum item
# covering the range [1M, 2M[ of the second extent we allocated.
#
# Also, after the fsync finishes we no longer have the 3 file extent
# items that pointed to 3 sections of the second extent we allocated.
# Instead we end up with a single file extent item pointing to the whole
# extent, with a type of BTRFS_FILE_EXTENT_REG and a generation of 7 (the
# current transaction ID). This is due to the file extent item merging we
# do when completing ordered extents into ranges that point to unwritten
# (preallocated) extents. This merging is done at
# btrfs_mark_extent_written().
#
$ xfs_io -c "pwrite -S 0xcd 4M 1M" \
-c "fsync" \
/mnt/foobar
# Now do some write to our file outside the range of the second extent
# that we allocated with fallocate() and truncate the file size from 6M
# down to 5M.
#
# The truncate operation sets the full sync runtime flag on the inode,
# forcing the next fsync to use the slow code path. It also changes the
# length of the second file extent item so that it represents the file
# range [3M, 5M[ and not the range [3M, 6M[ anymore.
#
# Finally fsync the file. Since this is a fsync that triggers the slow
# code path, it will remove all items associated to the inode from the
# log tree and then it will scan for file extent items in the
# fs/subvolume tree that have a generation matching the current
# transaction ID, which is 7. This means it will log 2 file extent
# items:
#
# 1) One for the first extent we allocated, covering the file range
# [0, 1M[
#
# 2) Another for the first 2M of the second extent we allocated,
# covering the file range [3M, 5M[
#
# When logging the first file extent item we log a single checksum item
# that has all the checksums for the entire extent.
#
# When logging the second file extent item, we also lookup for the
# checksums that are associated with the range [0, 2M[ of the second
# extent we allocated (file range [3M, 5M[), and then we log them with
# btrfs_csum_file_blocks(). However that results in ending up with a log
# that has two checksum items with ranges that overlap:
#
# 1) One for the range [1M, 2M[ of the second extent we allocated,
# corresponding to the file range [4M, 5M[, which we logged in the
# previous fsync that used the fast code path;
#
# 2) One for the ranges [0, 1M[ and [0, 2M[ of the first and second
# extents, respectively, corresponding to the files ranges [0, 1M[
# and [3M, 5M[. This one was added during this last fsync that uses
# the slow code path and overlaps with the previous one logged by
# the previous fast fsync.
#
# This happens because when logging the checksums for the second
# extent, we notice they start at an offset that matches the end of the
# checksums item that we logged for the first extent, and because both
# extents are contiguous on disk, btrfs_csum_file_blocks() decides to
# extend that existing checksums item and append the checksums for the
# second extent to this item. The end result is we end up with two
# checksum items in the log tree that have overlapping ranges, as
# listed before, resulting in the fsync to fail with -EIO and aborting
# the transaction, turning the filesystem into RO mode.
#
$ xfs_io -c "pwrite -S 0xff 0 1M" \
-c "truncate 5M" \
-c "fsync" \
/mnt/foobar
fsync: Input/output error
After running the example, dmesg/syslog shows the tree checker complained
about the checksum items with overlapping ranges and we aborted the
transaction:
$ dmesg
(...)
[756289.557487] BTRFS critical (device sdc): corrupt leaf: root=18446744073709551610 block=30720000 slot=5, csum end range (16777216) goes beyond the start range (15728640) of the next csum item
[756289.560583] BTRFS info (device sdc): leaf 30720000 gen 7 total ptrs 7 free space 11677 owner 18446744073709551610
[756289.562435] BTRFS info (device sdc): refs 2 lock_owner 0 current 2303929
[756289.563654] item 0 key (257 1 0) itemoff 16123 itemsize 160
[756289.564649] inode generation 6 size 5242880 mode 100600
[756289.565636] item 1 key (257 12 256) itemoff 16107 itemsize 16
[756289.566694] item 2 key (257 108 0) itemoff 16054 itemsize 53
[756289.567725] extent data disk bytenr 13631488 nr 1048576
[756289.568697] extent data offset 0 nr 1048576 ram 1048576
[756289.569689] item 3 key (257 108 1048576) itemoff 16001 itemsize 53
[756289.570682] extent data disk bytenr 0 nr 0
[756289.571363] extent data offset 0 nr 2097152 ram 2097152
[756289.572213] item 4 key (257 108 3145728) itemoff 15948 itemsize 53
[756289.573246] extent data disk bytenr 14680064 nr 3145728
[756289.574121] extent data offset 0 nr 2097152 ram 3145728
[756289.574993] item 5 key (18446744073709551606 128 13631488) itemoff 12876 itemsize 3072
[756289.576113] item 6 key (18446744073709551606 128 15728640) itemoff 11852 itemsize 1024
[756289.577286] BTRFS error (device sdc): block=30720000 write time tree block corruption detected
[756289.578644] ------------[ cut here ]------------
[756289.579376] WARNING: CPU: 0 PID: 2303929 at fs/btrfs/disk-io.c:465 csum_one_extent_buffer+0xed/0x100 [btrfs]
[756289.580857] Modules linked in: btrfs dm_zero dm_dust loop dm_snapshot (...)
[756289.591534] CPU: 0 PID: 2303929 Comm: xfs_io Tainted: G W 5.12.0-rc8-btrfs-next-87 #1
[756289.592580] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[756289.594161] RIP: 0010:csum_one_extent_buffer+0xed/0x100 [btrfs]
[756289.595122] Code: 5d c3 e8 76 60 (...)
[756289.597509] RSP: 0018:ffffb51b416cb898 EFLAGS: 00010282
[756289.598142] RAX: 0000000000000000 RBX: fffff02b8a365bc0 RCX: 0000000000000000
[756289.598970] RDX: 0000000000000000 RSI: ffffffffa9112421 RDI: 00000000ffffffff
[756289.599798] RBP: ffffa06500880000 R08: 0000000000000000 R09: 0000000000000000
[756289.600619] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
[756289.601456] R13: ffffa0652b1d8980 R14: ffffa06500880000 R15: 0000000000000000
[756289.602278] FS: 00007f08b23c9800(0000) GS:ffffa0682be00000(0000) knlGS:0000000000000000
[756289.603217] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[756289.603892] CR2: 00005652f32d0138 CR3: 000000025d616003 CR4: 0000000000370ef0
[756289.604725] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[756289.605563] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[756289.606400] Call Trace:
[756289.606704] btree_csum_one_bio+0x244/0x2b0 [btrfs]
[756289.607313] btrfs_submit_metadata_bio+0xb7/0x100 [btrfs]
[756289.608040] submit_one_bio+0x61/0x70 [btrfs]
[756289.608587] btree_write_cache_pages+0x587/0x610 [btrfs]
[756289.609258] ? free_debug_processing+0x1d5/0x240
[756289.609812] ? __module_address+0x28/0xf0
[756289.610298] ? lock_acquire+0x1a0/0x3e0
[756289.610754] ? lock_acquired+0x19f/0x430
[756289.611220] ? lock_acquire+0x1a0/0x3e0
[756289.611675] do_writepages+0x43/0xf0
[756289.612101] ? __filemap_fdatawrite_range+0xa4/0x100
[756289.612800] __filemap_fdatawrite_range+0xc5/0x100
[756289.613393] btrfs_write_marked_extents+0x68/0x160 [btrfs]
[756289.614085] btrfs_sync_log+0x21c/0xf20 [btrfs]
[756289.614661] ? finish_wait+0x90/0x90
[756289.615096] ? __mutex_unlock_slowpath+0x45/0x2a0
[756289.615661] ? btrfs_log_inode_parent+0x3c9/0xdc0 [btrfs]
[756289.616338] ? lock_acquire+0x1a0/0x3e0
[756289.616801] ? lock_acquired+0x19f/0x430
[756289.617284] ? lock_acquire+0x1a0/0x3e0
[756289.617750] ? lock_release+0x214/0x470
[756289.618221] ? lock_acquired+0x19f/0x430
[756289.618704] ? dput+0x20/0x4a0
[756289.619079] ? dput+0x20/0x4a0
[756289.619452] ? lockref_put_or_lock+0x9/0x30
[756289.619969] ? lock_release+0x214/0x470
[756289.620445] ? lock_release+0x214/0x470
[756289.620924] ? lock_release+0x214/0x470
[756289.621415] btrfs_sync_file+0x46a/0x5b0 [btrfs]
[756289.621982] do_fsync+0x38/0x70
[756289.622395] __x64_sys_fsync+0x10/0x20
[756289.622907] do_syscall_64+0x33/0x80
[756289.623438] entry_SYSCALL_64_after_hwframe+0x44/0xae
[756289.624063] RIP: 0033:0x7f08b27fbb7b
[756289.624588] Code: 0f 05 48 3d 00 (...)
[756289.626760] RSP: 002b:00007ffe2583f940 EFLAGS: 00000293 ORIG_RAX: 000000000000004a
[756289.627639] RAX: ffffffffffffffda RBX: 00005652f32cd0f0 RCX: 00007f08b27fbb7b
[756289.628464] RDX: 00005652f32cbca0 RSI: 00005652f32cd110 RDI: 0000000000000003
[756289.629323] RBP: 00005652f32cd110 R08: 0000000000000000 R09: 00007f08b28c4be0
[756289.630172] R10: fffffffffffff39a R11: 0000000000000293 R12: 0000000000000001
[756289.631007] R13: 00005652f32cd0f0 R14: 0000000000000001 R15: 00005652f32cc480
[756289.631819] irq event stamp: 0
[756289.632188] hardirqs last enabled at (0): [<0000000000000000>] 0x0
[756289.632911] hardirqs last disabled at (0): [<ffffffffa7e97c29>] copy_process+0x879/0x1cc0
[756289.633893] softirqs last enabled at (0): [<ffffffffa7e97c29>] copy_process+0x879/0x1cc0
[756289.634871] softirqs last disabled at (0): [<0000000000000000>] 0x0
[756289.635606] ---[ end trace 0a039fdc16ff3fef ]---
[756289.636179] BTRFS: error (device sdc) in btrfs_sync_log:3136: errno=-5 IO failure
[756289.637082] BTRFS info (device sdc): forced readonly
Having checksum items covering ranges that overlap is dangerous as in some
cases it can lead to having extent ranges for which we miss checksums
after log replay or getting the wrong checksum item. There were some fixes
in the past for bugs that resulted in this problem, and were explained and
fixed by the following commits:
27b9a8122ff71a ("Btrfs: fix csum tree corruption, duplicate and outdated checksums")
b84b8390d6009c ("Btrfs: fix file read corruption after extent cloning and fsync")
40e046acbd2f36 ("Btrfs: fix missing data checksums after replaying a log tree")
e289f03ea79bbc ("btrfs: fix corrupt log due to concurrent fsync of inodes with shared extents")
Fix the issue by making btrfs_csum_file_blocks() taking into account the
start offset of the next checksum item when it decides to extend an
existing checksum item, so that it never extends the checksum to end at a
range that goes beyond the start range of the next checksum item.
When we can not access the next checksum item without releasing the path,
simply drop the optimization of extending the previous checksum item and
fallback to inserting a new checksum item - this happens rarely and the
optimization is not significant enough for a log tree in order to justify
the extra complexity, as it would only save a few bytes (the size of a
struct btrfs_item) of leaf space.
This behaviour is only needed when inserting into a log tree because
for the regular checksums tree we never have a case where we try to
insert a range of checksums that overlap with a range that was previously
inserted.
A test case for fstests will follow soon.
Reported-by: Philipp Fent <[email protected]>
Link: https://lore.kernel.org/linux-btrfs/[email protected]/
CC: [email protected] # 5.4+
Tested-by: Anand Jain <[email protected]>
Signed-off-by: Filipe Manana <[email protected]>
Signed-off-by: David Sterba <[email protected]>
|
|
Error injection stress uncovered a problem where we'd leave a dangling
inode ref if we failed during a rename_exchange. This happens because
we insert the inode ref for one side of the rename, and then for the
other side. If this second inode ref insert fails we'll leave the first
one dangling and leave a corrupt file system behind. Fix this by
aborting if we did the insert for the first inode ref.
CC: [email protected] # 4.9+
Signed-off-by: Josef Bacik <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
|
|
Error injection testing uncovered a case where we ended up with invalid
link counts on an inode. This happened because we failed to notice an
error when updating the inode while replaying the tree log, and
committed the transaction with an invalid file system.
Fix this by checking the return value of btrfs_update_inode. This
resolved the link count errors I was seeing, and we already properly
handle passing up the error values in these paths.
CC: [email protected] # 4.4+
Reviewed-by: Johannes Thumshirn <[email protected]>
Reviewed-by: Qu Wenruo <[email protected]>
Signed-off-by: Josef Bacik <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
|
|
This function has the following pattern
while (1) {
ret = whatever();
if (ret)
goto out;
}
ret = 0
out:
return ret;
However several places in this while loop we simply break; when there's
a problem, thus clearing the return value, and in one case we do a
return -EIO, and leak the memory for the path.
Fix this by re-arranging the loop to deal with ret == 1 coming from
btrfs_search_slot, and then simply delete the
ret = 0;
out:
bit so everybody can break if there is an error, which will allow for
proper error handling to occur.
CC: [email protected] # 4.4+
Signed-off-by: Josef Bacik <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
|
|
While doing error injection testing I saw that sometimes we'd get an
abort that wouldn't stop the current transaction commit from completing.
This abort was coming from finish ordered IO, but at this point in the
transaction commit we should have gotten an error and stopped.
It turns out the abort came from finish ordered io while trying to write
out the free space cache. It occurred to me that any failure inside of
finish_ordered_io isn't actually raised to the person doing the writing,
so we could have any number of failures in this path and think the
ordered extent completed successfully and the inode was fine.
Fix this by marking the ordered extent with BTRFS_ORDERED_IOERR, and
marking the mapping of the inode with mapping_set_error, so any callers
that simply call fdatawait will also get the error.
With this we're seeing the IO error on the free space inode when we fail
to do the finish_ordered_io.
CC: [email protected] # 4.19+
Signed-off-by: Josef Bacik <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
|
|
We are unconditionally returning 0 in cleanup_ref_head, despite the fact
that btrfs_del_csums could fail. We need to return the error so the
transaction gets aborted properly, fix this by returning ret from
btrfs_del_csums in cleanup_ref_head.
Reviewed-by: Qu Wenruo <[email protected]>
CC: [email protected] # 4.19+
Signed-off-by: Josef Bacik <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
|
|
Error injection stress would sometimes fail with checksums on disk that
did not have a corresponding extent. This occurred because the pattern
in btrfs_del_csums was
while (1) {
ret = btrfs_search_slot();
if (ret < 0)
break;
}
ret = 0;
out:
btrfs_free_path(path);
return ret;
If we got an error from btrfs_search_slot we'd clear the error because
we were breaking instead of goto out. Instead of using goto out, simply
handle the cases where we may leave a random value in ret, and get rid
of the
ret = 0;
out:
pattern and simply allow break to have the proper error reporting. With
this fix we properly abort the transaction and do not commit thinking we
successfully deleted the csum.
Reviewed-by: Qu Wenruo <[email protected]>
CC: [email protected] # 4.4+
Signed-off-by: Josef Bacik <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
|
|
[BUG]
When running btrfs/027 with "-o compress" mount option, it always
crashes with the following call trace:
BTRFS critical (device dm-4): mapping failed logical 298901504 bio len 12288 len 8192
------------[ cut here ]------------
kernel BUG at fs/btrfs/volumes.c:6651!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 5 PID: 31089 Comm: kworker/u24:10 Tainted: G OE 5.13.0-rc2-custom+ #26
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Workqueue: btrfs-delalloc btrfs_work_helper [btrfs]
RIP: 0010:btrfs_map_bio.cold+0x58/0x5a [btrfs]
Call Trace:
btrfs_submit_compressed_write+0x2d7/0x470 [btrfs]
submit_compressed_extents+0x3b0/0x470 [btrfs]
? mark_held_locks+0x49/0x70
btrfs_work_helper+0x131/0x3e0 [btrfs]
process_one_work+0x28f/0x5d0
worker_thread+0x55/0x3c0
? process_one_work+0x5d0/0x5d0
kthread+0x141/0x160
? __kthread_bind_mask+0x60/0x60
ret_from_fork+0x22/0x30
---[ end trace 63113a3a91f34e68 ]---
[CAUSE]
The critical message before the crash means we have a bio at logical
bytenr 298901504 length 12288, but only 8192 bytes can fit into one
stripe, the remaining 4096 bytes go to another stripe.
In btrfs, all bios are properly split to avoid cross stripe boundary,
but commit 764c7c9a464b ("btrfs: zoned: fix parallel compressed writes")
changed the behavior for compressed writes.
Previously if we find our new page can't be fitted into current stripe,
ie. "submit == 1" case, we submit current bio without adding current
page.
submit = btrfs_bio_fits_in_stripe(page, PAGE_SIZE, bio, 0);
page->mapping = NULL;
if (submit || bio_add_page(bio, page, PAGE_SIZE, 0) <
PAGE_SIZE) {
But after the modification, we will add the page no matter if it crosses
stripe boundary, leading to the above crash.
submit = btrfs_bio_fits_in_stripe(page, PAGE_SIZE, bio, 0);
if (pg_index == 0 && use_append)
len = bio_add_zone_append_page(bio, page, PAGE_SIZE, 0);
else
len = bio_add_page(bio, page, PAGE_SIZE, 0);
page->mapping = NULL;
if (submit || len < PAGE_SIZE) {
[FIX]
It's no longer possible to revert to the original code style as we have
two different bio_add_*_page() calls now.
The new fix is to skip the bio_add_*_page() call if @submit is true.
Also to avoid @len to be uninitialized, always initialize it to zero.
If @submit is true, @len will not be checked.
If @submit is not true, @len will be the return value of
bio_add_*_page() call.
Either way, the behavior is still the same as the old code.
Reported-by: Josef Bacik <[email protected]>
Fixes: 764c7c9a464b ("btrfs: zoned: fix parallel compressed writes")
Reviewed-by: Johannes Thumshirn <[email protected]>
Signed-off-by: Qu Wenruo <[email protected]>
Signed-off-by: David Sterba <[email protected]>
|
|
Make CIFS_FULL_KEY_DUMP ioctl able to return variable-length keys.
* userspace needs to pass the struct size along with optional
session_id and some space at the end to store keys
* if there is enough space kernel returns keys in the extra space and
sets the length of each key via xyz_key_length fields
This also fixes the build error for get_user() on ARM.
Sample program:
#include <stdlib.h>
#include <stdio.h>
#include <stdint.h>
#include <sys/fcntl.h>
#include <sys/ioctl.h>
struct smb3_full_key_debug_info {
uint32_t in_size;
uint64_t session_id;
uint16_t cipher_type;
uint8_t session_key_length;
uint8_t server_in_key_length;
uint8_t server_out_key_length;
uint8_t data[];
/*
* return this struct with the keys appended at the end:
* uint8_t session_key[session_key_length];
* uint8_t server_in_key[server_in_key_length];
* uint8_t server_out_key[server_out_key_length];
*/
} __attribute__((packed));
#define CIFS_IOCTL_MAGIC 0xCF
#define CIFS_DUMP_FULL_KEY _IOWR(CIFS_IOCTL_MAGIC, 10, struct smb3_full_key_debug_info)
void dump(const void *p, size_t len) {
const char *hex = "0123456789ABCDEF";
const uint8_t *b = p;
for (int i = 0; i < len; i++)
printf("%c%c ", hex[(b[i]>>4)&0xf], hex[b[i]&0xf]);
putchar('\n');
}
int main(int argc, char **argv)
{
struct smb3_full_key_debug_info *keys;
uint8_t buf[sizeof(*keys)+1024] = {0};
size_t off = 0;
int fd, rc;
keys = (struct smb3_full_key_debug_info *)&buf;
keys->in_size = sizeof(buf);
fd = open(argv[1], O_RDONLY);
if (fd < 0)
perror("open"), exit(1);
rc = ioctl(fd, CIFS_DUMP_FULL_KEY, keys);
if (rc < 0)
perror("ioctl"), exit(1);
printf("SessionId ");
dump(&keys->session_id, 8);
printf("Cipher %04x\n", keys->cipher_type);
printf("SessionKey ");
dump(keys->data+off, keys->session_key_length);
off += keys->session_key_length;
printf("ServerIn Key ");
dump(keys->data+off, keys->server_in_key_length);
off += keys->server_in_key_length;
printf("ServerOut Key ");
dump(keys->data+off, keys->server_out_key_length);
return 0;
}
Usage:
$ gcc -o dumpkeys dumpkeys.c
Against Windows Server 2020 preview (with AES-256-GCM support):
# mount.cifs //$ip/test /mnt -o "username=administrator,password=foo,vers=3.0,seal"
# ./dumpkeys /mnt/somefile
SessionId 0D 00 00 00 00 0C 00 00
Cipher 0002
SessionKey AB CD CC 0D E4 15 05 0C 6F 3C 92 90 19 F3 0D 25
ServerIn Key 73 C6 6A C8 6B 08 CF A2 CB 8E A5 7D 10 D1 5B DC
ServerOut Key 6D 7E 2B A1 71 9D D7 2B 94 7B BA C4 F0 A5 A4 F8
# umount /mnt
With 256 bit keys:
# echo 1 > /sys/module/cifs/parameters/require_gcm_256
# mount.cifs //$ip/test /mnt -o "username=administrator,password=foo,vers=3.11,seal"
# ./dumpkeys /mnt/somefile
SessionId 09 00 00 00 00 0C 00 00
Cipher 0004
SessionKey 93 F5 82 3B 2F B7 2A 50 0B B9 BA 26 FB 8C 8B 03
ServerIn Key 6C 6A 89 B2 CB 7B 78 E8 04 93 37 DA 22 53 47 DF B3 2C 5F 02 26 70 43 DB 8D 33 7B DC 66 D3 75 A9
ServerOut Key 04 11 AA D7 52 C7 A8 0F ED E3 93 3A 65 FE 03 AD 3F 63 03 01 2B C0 1B D7 D7 E5 52 19 7F CC 46 B4
Signed-off-by: Aurelien Aptel <[email protected]>
Reviewed-by: Ronnie Sahlberg <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
Now that the i2c-i801 driver supports interrupts, setting the KILL bit
in a attempt to recover from a timed out transaction triggers an
interrupt. Unfortunately, the interrupt handler (i801_isr) is not
prepared for this situation and will try to process the interrupt as
if it was signaling the end of a successful transaction. In the case
of a block transaction, this can result in an out-of-range memory
access.
This condition was reproduced several times by syzbot:
https://syzkaller.appspot.com/bug?extid=ed71512d469895b5b34e
https://syzkaller.appspot.com/bug?extid=8c8dedc0ba9e03f6c79e
https://syzkaller.appspot.com/bug?extid=c8ff0b6d6c73d81b610e
https://syzkaller.appspot.com/bug?extid=33f6c360821c399d69eb
https://syzkaller.appspot.com/bug?extid=be15dc0b1933f04b043a
https://syzkaller.appspot.com/bug?extid=b4d3fd1dfd53e90afd79
So disable interrupts while trying to reset the bus. Interrupts will
be enabled again for the following transaction.
Fixes: 636752bcb517 ("i2c-i801: Enable IRQ for SMBus transactions")
Reported-by: [email protected]
Signed-off-by: Jean Delvare <[email protected]>
Acked-by: Andy Shevchenko <[email protected]>
Cc: Jarkko Nikula <[email protected]>
Tested-by: Jarkko Nikula <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
The P2040/P2041 has an erratum where the normal i2c recovery mechanism
does not work. Implement the alternative recovery mechanism documented
in the P2040 Chip Errata Rev Q.
Signed-off-by: Chris Packham <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
The i2c controllers on the P1010 have an erratum where the documented
scheme for i2c bus recovery will not work (A-004447). A different
mechanism is needed which is documented in the P1010 Chip Errata Rev L.
Signed-off-by: Chris Packham <[email protected]>
Acked-by: Michael Ellerman <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
The i2c controllers on the P2040/P2041 have an erratum where the
documented scheme for i2c bus recovery will not work (A-004447). A
different mechanism is needed which is documented in the P2040 Chip
Errata Rev Q (latest available at the time of writing).
Signed-off-by: Chris Packham <[email protected]>
Acked-by: Michael Ellerman <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
Document the fsl,i2c-erratum-a004447 flag which indicates the presence
of an i2c erratum on some QorIQ SoCs.
Signed-off-by: Chris Packham <[email protected]>
Acked-by: Rob Herring <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/i2c/busses/i2c-stm32f4.c:321: warning: expecting prototype for stm32f4_i2c_write_ byte()(). Prototype was for stm32f4_i2c_write_byte() instead
Signed-off-by: Lee Jones <[email protected]>
Reviewed-by: Alain Volmat <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/i2c/busses/i2c-st.c:531: warning: expecting prototype for st_i2c_handle_write(). Prototype was for st_i2c_handle_read() instead
drivers/i2c/busses/i2c-st.c:566: warning: expecting prototype for st_i2c_isr(). Prototype was for st_i2c_isr_thread() instead
Fix the "enmpty" typo while here.
Signed-off-by: Lee Jones <[email protected]>
Reviewed-by: Alain Volmat <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/i2c/busses/i2c-pnx.c:147: warning: Function parameter or member 'alg_data' not described in 'i2c_pnx_start'
drivers/i2c/busses/i2c-pnx.c:147: warning: Excess function parameter 'adap' description in 'i2c_pnx_start'
drivers/i2c/busses/i2c-pnx.c:202: warning: Function parameter or member 'alg_data' not described in 'i2c_pnx_stop'
drivers/i2c/busses/i2c-pnx.c:202: warning: Excess function parameter 'adap' description in 'i2c_pnx_stop'
drivers/i2c/busses/i2c-pnx.c:231: warning: Function parameter or member 'alg_data' not described in 'i2c_pnx_master_xmit'
drivers/i2c/busses/i2c-pnx.c:231: warning: Excess function parameter 'adap' description in 'i2c_pnx_master_xmit'
drivers/i2c/busses/i2c-pnx.c:301: warning: Function parameter or member 'alg_data' not described in 'i2c_pnx_master_rcv'
drivers/i2c/busses/i2c-pnx.c:301: warning: Excess function parameter 'adap' description in 'i2c_pnx_master_rcv'
Signed-off-by: Lee Jones <[email protected]>
Acked-by: Vladimir Zapolskiy <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
documentation headers
Fixes the following W=1 kernel build warning(s):
drivers/i2c/busses/i2c-ocores.c:253: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/i2c/busses/i2c-ocores.c:267: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/i2c/busses/i2c-ocores.c:299: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/i2c/busses/i2c-ocores.c:347: warning: expecting prototype for It handles an IRQ(). Prototype was for ocores_process_polling() instead
Signed-off-by: Lee Jones <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Reviewed-by: Peter Korsgaard <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
'msgs' param
Fixes the following W=1 kernel build warning(s):
drivers/i2c/busses/i2c-eg20t.c:151: warning: bad line: PCH i2c controller
drivers/i2c/busses/i2c-eg20t.c:369: warning: Function parameter or member 'msgs' not described in 'pch_i2c_writebytes'
Signed-off-by: Lee Jones <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/i2c/busses/i2c-designware-master.c:176: warning: expecting prototype for i2c_dw_init(). Prototype was for i2c_dw_init_master() instead
Signed-off-by: Lee Jones <[email protected]>
Acked-by: Jarkko Nikula <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/i2c/busses/i2c-cadence.c:157: warning: expecting prototype for enum cdns_i2c_slave_mode. Prototype was for enum cdns_i2c_slave_state instead
Signed-off-by: Lee Jones <[email protected]>
Reviewed-by: Michal Simek <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/i2c/busses/i2c-ali1563.c:24: warning: expecting prototype for i2c(). Prototype was for ALI1563_MAX_TIMEOUT() instead
Signed-off-by: Lee Jones <[email protected]>
Reviewed-by: Jean Delvare <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/i2c/muxes/i2c-arb-gpio-challenge.c:43: warning: Function parameter or member 'muxc' not described in 'i2c_arbitrator_select'
drivers/i2c/muxes/i2c-arb-gpio-challenge.c:43: warning: Function parameter or member 'chan' not described in 'i2c_arbitrator_select'
drivers/i2c/muxes/i2c-arb-gpio-challenge.c:86: warning: Function parameter or member 'muxc' not described in 'i2c_arbitrator_deselect'
drivers/i2c/muxes/i2c-arb-gpio-challenge.c:86: warning: Function parameter or member 'chan' not described in 'i2c_arbitrator_deselect'
Signed-off-by: Lee Jones <[email protected]>
Acked-by: Douglas Anderson <[email protected]>
Acked-by: Peter Rosin <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/i2c/busses/i2c-nomadik.c:184: warning: Function parameter or member 'timeout' not described in 'nmk_i2c_dev'
Signed-off-by: Lee Jones <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
We missed using the variable length string macros in several
tracepoints. Fixed them in this change.
There's probably more useful macros that we can use to print
others like flags etc. But I'll submit sepawrate patches for
those at a future date.
Signed-off-by: Shyam Prasad N <[email protected]>
Cc: <[email protected]> # v5.12
Signed-off-by: Steve French <[email protected]>
|
|
SMB3.0 doesn't have encryption negotiate context but simply uses
the SMB2_GLOBAL_CAP_ENCRYPTION flag.
When that flag is present in the neg response cifs.ko uses AES-128-CCM
which is the only cipher available in this context.
cipher_type was set to the server cipher only when parsing encryption
negotiate context (SMB3.1.1).
For SMB3.0 it was set to 0. This means cipher_type value can be 0 or 1
for AES-128-CCM.
Fix this by checking for SMB3.0 and encryption capability and setting
cipher_type appropriately.
Signed-off-by: Aurelien Aptel <[email protected]>
Cc: <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix a recent ACPI power management regression causing boot issues to
occur on some systems due to attempts to turn off ACPI power resources
that are already off (which should work according to the ACPI
specification)"
* tag 'acpi-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: power: Refine turning off unused power resources
|
|
The ccache tool can be used to speed up cross-compilation, by calling the
compiler and binutils through ccache. For example, following should work:
$ export ARCH=arm64 CROSS_COMPILE="ccache aarch64-linux-gnu-"
$ make M=drivers/gpu/drm/rockchip/
but pahole fails to extract the BTF info from DWARF, breaking the build:
CC [M] drivers/gpu/drm/rockchip//rockchipdrm.mod.o
LD [M] drivers/gpu/drm/rockchip//rockchipdrm.ko
BTF [M] drivers/gpu/drm/rockchip//rockchipdrm.ko
aarch64-linux-gnu-objcopy: invalid option -- 'J'
Usage: aarch64-linux-gnu-objcopy [option(s)] in-file [out-file]
Copies a binary file, possibly transforming it in the process
...
make[1]: *** [scripts/Makefile.modpost:156: __modpost] Error 2
make: *** [Makefile:1866: modules] Error 2
this fails because OBJCOPY is set to "ccache aarch64-linux-gnu-copy" and
later pahole is executed with the following command line:
LLVM_OBJCOPY=$(OBJCOPY) $(PAHOLE) -J --btf_base vmlinux $@
which gets expanded to:
LLVM_OBJCOPY=ccache aarch64-linux-gnu-objcopy pahole -J ...
instead of:
LLVM_OBJCOPY="ccache aarch64-linux-gnu-objcopy" pahole -J ...
Fixes: 5f9ae91f7c0d ("kbuild: Build kernel module BTFs if BTF is enabled and pahole supports it")
Signed-off-by: Javier Martinez Canillas <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Acked-by: Arnaldo Carvalho de Melo <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
In the case where the AUX provides an I2C-over-AUX DDC channel, a
reference is taken on the AUX parent device of the DDC channel rather
than the DDC channel like it would be for regular I2C controllers. To
make sure the correct reference is dropped, move the unreferencing code
into the SOR driver and make sure not to drop the I2C adapter reference
in that case.
Signed-off-by: Thierry Reding <[email protected]>
|
|
While we're taking a reference of the DDC adapter for a DP AUX channel in
tegra_sor_probe() because we're going to be using that adapter with the
SOR, now that we've moved where AUX registration happens the actual device
structure for the DDC adapter isn't initialized yet. Which means that we
can't really take a reference from it to try to keep it around anymore.
This should be fine though, because we can just take a reference of its
parent instead.
v2:
* Avoid calling i2c_put_adapter() in tegra_output_remove() for eDP/DP cases
Signed-off-by: Lyude Paul <[email protected]>
Fixes: 39c17ae60ea9 ("drm/tegra: Don't register DP AUX channels before connectors")
Cc: Lyude Paul <[email protected]>
Cc: Thierry Reding <[email protected]>
Cc: Jonathan Hunter <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Thierry Reding <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Important fix for the AMD IOMMU driver in the recently added
page-specific invalidation code to fix a calculation.
- Fix a NULL-ptr dereference in the AMD IOMMU driver when a device
switches domain types.
- Fixes for the Intel VT-d driver to check for allocation failure and
do correct cleanup.
- Another fix for Intel VT-d to not allow supervisor page requests from
devices when using second level page translation.
- Add a MODULE_DEVICE_TABLE to the VIRTIO IOMMU driver
* tag 'iommu-fixes-v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Fix sysfs leak in alloc_iommu()
iommu/vt-d: Use user privilege for RID2PASID translation
iommu/vt-d: Check for allocation failure in aux_detach_device()
iommu/virtio: Add missing MODULE_DEVICE_TABLE
iommu/amd: Fix wrong parentheses on page-specific invalidations
iommu/amd: Clear DMA ops when switching domain
|
|
This avoids segfaults during option handlers that use pr_err. For
example, "perf --debug nopager list" segfaults before this change.
Fixes: 8abceacff87d (perf debug: Add debug_set_file function)
Signed-off-by: Ian Rogers <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Fix rename of one directory over another such that the nlink on the deleted
directory is cleared to 0 rather than being decremented to 1.
This was causing the generic/035 xfstest to fail.
Fixes: e49c7b2f6de7 ("afs: Build an abstraction around an "operation" concept")
Signed-off-by: David Howells <[email protected]>
Reviewed-by: Marc Dionne <[email protected]>
cc: [email protected]
Link: https://lore.kernel.org/r/162194384460.3999479.7605572278074191079.stgit@warthog.procyon.org.uk/ # v1
Signed-off-by: Linus Torvalds <[email protected]>
|
|
In the cleanup routine for failed initialization of HCI device,
the flush_work(&hdev->rx_work) need to be finished before the
flush_work(&hdev->cmd_work). Otherwise, the hci_rx_work() can
possibly invoke new cmd_work and cause a bug, like double free,
in late processings.
This was assigned CVE-2021-3564.
This patch reorder the flush_work() to fix this bug.
Cc: Marcel Holtmann <[email protected]>
Cc: Johan Hedberg <[email protected]>
Cc: Luiz Augusto von Dentz <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Lin Ma <[email protected]>
Signed-off-by: Hao Xiong <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
|
|
large directory block size operations are assert failing because
xfs_bunmapi() is not completely removing fragmented directory blocks
like so:
XFS: Assertion failed: done, file: fs/xfs/libxfs/xfs_dir2.c, line: 677
....
Call Trace:
xfs_dir2_shrink_inode+0x1a8/0x210
xfs_dir2_block_to_sf+0x2ae/0x410
xfs_dir2_block_removename+0x21a/0x280
xfs_dir_removename+0x195/0x1d0
xfs_rename+0xb79/0xc50
? avc_has_perm+0x8d/0x1a0
? avc_has_perm_noaudit+0x9a/0x120
xfs_vn_rename+0xdb/0x150
vfs_rename+0x719/0xb50
? __lookup_hash+0x6a/0xa0
do_renameat2+0x413/0x5e0
__x64_sys_rename+0x45/0x50
do_syscall_64+0x3a/0x70
entry_SYSCALL_64_after_hwframe+0x44/0xae
We are aborting the bunmapi() pass because of this specific chunk of
code:
/*
* Make sure we don't touch multiple AGF headers out of order
* in a single transaction, as that could cause AB-BA deadlocks.
*/
if (!wasdel && !isrt) {
agno = XFS_FSB_TO_AGNO(mp, del.br_startblock);
if (prev_agno != NULLAGNUMBER && prev_agno > agno)
break;
prev_agno = agno;
}
This is designed to prevent deadlocks in AGF locking when freeing
multiple extents by ensuring that we only ever lock in increasing
AG number order. Unfortunately, this also violates the "bunmapi will
always succeed" semantic that some high level callers depend on,
such as xfs_dir2_shrink_inode(), xfs_da_shrink_inode() and
xfs_inactive_symlink_rmt().
This AG lock ordering was introduced back in 2017 to fix deadlocks
triggered by generic/299 as reported here:
https://lore.kernel.org/linux-xfs/[email protected]/
This codebase is old enough that it was before we were defering all
AG based extent freeing from within xfs_bunmapi(). THat is, we never
actually lock AGs in xfs_bunmapi() any more - every non-rt based
extent free is added to the defer ops list, as is all BMBT block
freeing. And RT extents are not RT based, so there's no lock
ordering issues associated with them.
Hence this AGF lock ordering code is both broken and dead. Let's
just remove it so that the large directory block code works reliably
again.
Tested against xfs/538 and generic/299 which is the original test
that exposed the deadlocks that this code fixed.
Fixes: 5b094d6dac04 ("xfs: fix multi-AG deadlock in xfs_bunmapi")
Signed-off-by: Dave Chinner <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Signed-off-by: Darrick J. Wong <[email protected]>
|