aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-06-08zonefs: fix zonefs_iomap_begin() for readsDamien Le Moal1-30/+64
If a readahead is issued to a sequential zone file with an offset exactly equal to the current file size, the iomap type is set to IOMAP_UNWRITTEN, which will prevent an IO, but the iomap length is calculated as 0. This causes a WARN_ON() in iomap_iter(): [17309.548939] WARNING: CPU: 3 PID: 2137 at fs/iomap/iter.c:34 iomap_iter+0x9cf/0xe80 [...] [17309.650907] RIP: 0010:iomap_iter+0x9cf/0xe80 [...] [17309.754560] Call Trace: [17309.757078] <TASK> [17309.759240] ? lock_is_held_type+0xd8/0x130 [17309.763531] iomap_readahead+0x1a8/0x870 [17309.767550] ? iomap_read_folio+0x4c0/0x4c0 [17309.771817] ? lockdep_hardirqs_on_prepare+0x400/0x400 [17309.778848] ? lock_release+0x370/0x750 [17309.784462] ? folio_add_lru+0x217/0x3f0 [17309.790220] ? reacquire_held_locks+0x4e0/0x4e0 [17309.796543] read_pages+0x17d/0xb60 [17309.801854] ? folio_add_lru+0x238/0x3f0 [17309.807573] ? readahead_expand+0x5f0/0x5f0 [17309.813554] ? policy_node+0xb5/0x140 [17309.819018] page_cache_ra_unbounded+0x27d/0x450 [17309.825439] filemap_get_pages+0x500/0x1450 [17309.831444] ? filemap_add_folio+0x140/0x140 [17309.837519] ? lock_is_held_type+0xd8/0x130 [17309.843509] filemap_read+0x28c/0x9f0 [17309.848953] ? zonefs_file_read_iter+0x1ea/0x4d0 [zonefs] [17309.856162] ? trace_contention_end+0xd6/0x130 [17309.862416] ? __mutex_lock+0x221/0x1480 [17309.868151] ? zonefs_file_read_iter+0x166/0x4d0 [zonefs] [17309.875364] ? filemap_get_pages+0x1450/0x1450 [17309.881647] ? __mutex_unlock_slowpath+0x15e/0x620 [17309.888248] ? wait_for_completion_io_timeout+0x20/0x20 [17309.895231] ? lock_is_held_type+0xd8/0x130 [17309.901115] ? lock_is_held_type+0xd8/0x130 [17309.906934] zonefs_file_read_iter+0x356/0x4d0 [zonefs] [17309.913750] new_sync_read+0x2d8/0x520 [17309.919035] ? __x64_sys_lseek+0x1d0/0x1d0 Furthermore, this causes iomap_readahead() to loop forever as iomap_readahead_iter() always returns 0, making no progress. Fix this by treating reads after the file size as access to holes, setting the iomap type to IOMAP_HOLE, the iomap addr to IOMAP_NULL_ADDR and using the length argument as is for the iomap length. To simplify the code with this change, zonefs_iomap_begin() is split into the read variant, zonefs_read_iomap_begin() and zonefs_read_iomap_ops, and the write variant, zonefs_write_iomap_begin() and zonefs_write_iomap_ops. Reported-by: Jorgen Hansen <[email protected]> Fixes: 8dcc1a9d90c1 ("fs: New zonefs file system") Signed-off-by: Damien Le Moal <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Reviewed-by: Jorgen Hansen <[email protected]>
2022-06-08KVM: arm64: Warn if accessing timer pending state outside of vcpu contextMarc Zyngier1-0/+3
A recurrent bug in the KVM/arm64 code base consists in trying to access the timer pending state outside of the vcpu context, which makes zero sense (the pending state only exists when the vcpu is loaded). In order to avoid more embarassing crashes and catch the offenders red-handed, add a warning to kvm_arch_timer_get_input_level() and return the state as non-pending. This avoids taking the system down, and still helps tracking down silly bugs. Reviewed-by: Eric Auger <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-06-08KVM: arm64: Replace vgic_v3_uaccess_read_pending with vgic_uaccess_read_pendingMarc Zyngier2-39/+22
Now that GICv2 has a proper userspace accessor for the pending state, switch GICv3 over to it, dropping the local version, moving over the specific behaviours that CGIv3 requires (such as the distinction between pending latch and line level which were never enforced with GICv2). We also gain extra locking that isn't really necessary for userspace, but that's a small price to pay for getting rid of superfluous code. Signed-off-by: Marc Zyngier <[email protected]> Reviewed-by: Eric Auger <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-06-08ALSA: hda/realtek - Add HW8326 supporthuangwenhui2-0/+15
Added the support of new Huawei codec HW8326. The HW8326 is developed by Huawei with Realtek's IP Core, and it's compatible with ALC256. Signed-off-by: huangwenhui <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-06-08KVM: x86: do not report a vCPU as preempted outside instruction boundariesPaolo Bonzini4-0/+28
If a vCPU is outside guest mode and is scheduled out, it might be in the process of making a memory access. A problem occurs if another vCPU uses the PV TLB flush feature during the period when the vCPU is scheduled out, and a virtual address has already been translated but has not yet been accessed, because this is equivalent to using a stale TLB entry. To avoid this, only report a vCPU as preempted if sure that the guest is at an instruction boundary. A rescheduling request will be delivered to the host physical CPU as an external interrupt, so for simplicity consider any vmexit *not* instruction boundary except for external interrupts. It would in principle be okay to report the vCPU as preempted also if it is sleeping in kvm_vcpu_block(): a TLB flush IPI will incur the vmentry/vmexit overhead unnecessarily, and optimistic spinning is also unlikely to succeed. However, leave it for later because right now kvm_vcpu_check_block() is doing memory accesses. Even though the TLB flush issue only applies to virtual memory address, it's very much preferrable to be conservative. Reported-by: Jann Horn <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-06-08KVM: x86: do not set st->preempted when going back to user spacePaolo Bonzini2-14/+18
Similar to the Xen path, only change the vCPU's reported state if the vCPU was actually preempted. The reason for KVM's behavior is that for example optimistic spinning might not be a good idea if the guest is doing repeated exits to userspace; however, it is confusing and unlikely to make a difference, because well-tuned guests will hardly ever exit KVM_RUN in the first place. Suggested-by: Sean Christopherson <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-06-08zonefs: Do not ignore explicit_open with active zone limitDamien Le Moal1-2/+5
A zoned device may have no limit on the number of open zones but may have a limit on the number of active zones it can support. In such case, the explicit_open mount option should not be ignored to ensure that the open() system call activates the zone with an explicit zone open command, thus guaranteeing that the zone can be written. Enforce this by ignoring the explicit_open mount option only for devices that have both the open and active zone limits equal to 0. Fixes: 87c9ce3ffec9 ("zonefs: Add active seq file accounting") Signed-off-by: Damien Le Moal <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]>
2022-06-08zonefs: fix handling of explicit_open option on mountDamien Le Moal1-6/+6
Ignoring the explicit_open mount option on mount for devices that do not have a limit on the number of open zones must be done after the mount options are parsed and set in s_mount_opts. Move the check to ignore the explicit_open option after the call to zonefs_parse_options() in zonefs_fill_super(). Fixes: b5c00e975779 ("zonefs: open/close zone on file open/close") Cc: <[email protected]> Signed-off-by: Damien Le Moal <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]>
2022-06-07net/mlx4_en: Fix wrong return value on ioctl EEPROM query failureGal Pressman1-1/+1
The ioctl EEPROM query wrongly returns success on read failures, fix that by returning the appropriate error code. Fixes: 7202da8b7f71 ("ethtool, net/mlx4_en: Cable info, get_module_info/eeprom ethtool support") Signed-off-by: Gal Pressman <[email protected]> Signed-off-by: Tariq Toukan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-06-07net: dsa: lantiq_gswip: Fix refcount leak in gswip_gphy_fw_listMiaoqian Lin1-1/+3
Every iteration of for_each_available_child_of_node() decrements the reference count of the previous node. when breaking early from a for_each_available_child_of_node() loop, we need to explicitly call of_node_put() on the gphy_fw_np. Add missing of_node_put() to avoid refcount leak. Fixes: 14fceff4771e ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Signed-off-by: Miaoqian Lin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-06-08libata: fix translation of concurrent positioning rangesTyler Erickson1-1/+1
Fixing the page length in the SCSI translation for the concurrent positioning ranges VPD page. It was writing starting in offset 3 rather than offset 2 where the MSB is supposed to start for the VPD page length. Cc: [email protected] Fixes: fe22e1c2f705 ("libata: support concurrent positioning ranges log") Signed-off-by: Tyler Erickson <[email protected]> Reviewed-by: Muhammad Ahmad <[email protected]> Tested-by: Michael English <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Signed-off-by: Damien Le Moal <[email protected]>
2022-06-08libata: fix reading concurrent positioning ranges logTyler Erickson1-8/+13
The concurrent positioning ranges log is not a fixed size and may depend on how many ranges are supported by the device. This patch uses the size reported in the GPL directory to determine the number of pages supported by the device before attempting to read this log page. This resolves this error from the dmesg output: ata6.00: Read log 0x47 page 0x00 failed, Emask 0x1 Cc: [email protected] Fixes: fe22e1c2f705 ("libata: support concurrent positioning ranges log") Signed-off-by: Tyler Erickson <[email protected]> Reviewed-by: Muhammad Ahmad <[email protected]> Tested-by: Michael English <[email protected]> Signed-off-by: Damien Le Moal <[email protected]>
2022-06-08LoongArch: Remove MIPS comment about cycle counterJason A. Donenfeld1-7/+0
This comment block was taken originally from the MIPS architecture code, where indeed there are particular assumptions one can make regarding SMP and !SMP and cycle counters. On LoongArch, however, the rdtime family of functions is always available. As Xuerui wrote: The rdtime family of instructions is in fact guaranteed to be available on LoongArch; LoongArch's subsets all contain them, even the 32-bit "Primary" subset intended for university teaching -- they provide the rdtimeh.w and rdtimel.w pair of instructions that access the same 64-bit counter. So this commit simply removes the incorrect comment block. Link: https://lore.kernel.org/lkml/[email protected]/ Fixes: b738c106f735 ("LoongArch: Add other common headers") Reviewed-by: WANG Xuerui <[email protected]> Signed-off-by: Jason A. Donenfeld <[email protected]> Signed-off-by: Huacai Chen <[email protected]>
2022-06-08LoongArch: Fix copy_thread() build errorsHuacai Chen1-6/+8
Commit c5febea0956fd387 ("fork: Pass struct kernel_clone_args into copy_thread") change the prototype of copy_thread(), while commit 5bd2e97c868a8a44 ("fork: Generalize PF_IO_WORKER handling") change the structure of kernel_clone_args. They cause build errors, so fix it. Fixes: 5bd2e97c868a8a44 ("fork: Generalize PF_IO_WORKER handling") Fixes: c5febea0956fd387 ("fork: Pass struct kernel_clone_args into copy_thread") Signed-off-by: Huacai Chen <[email protected]>
2022-06-08LoongArch: Fix the !CONFIG_SMP buildHuacai Chen9-23/+23
1, We assume arch/loongarch/include/asm/smp.h be included in include/ linux/smp.h is valid and the reverse inclusion isn't. So remove the <linux/smp.h> in arch/loongarch/include/asm/smp.h. 2, arch/loongarch/include/asm/smp.h is only needed when CONFIG_SMP, and setup.c include it only because it need plat_smp_setup(). So, reorganize setup.c & smp.h, and then remove <asm/smp.h> in setup.c. 3, Fix cacheinfo.c and percpu.h build error by adding the missing header files when !CONFIG_SMP. 4, Fix acpi.c build error by adding CONFIG_SMP guards. 5, Move irq_stat definition from smp.c to irq.c and fix its declaration. 6, Select CONFIG_SMP for CONFIG_NUMA, similar as other architectures do. Signed-off-by: Huacai Chen <[email protected]>
2022-06-07scsi: pmcraid: Fix missing resource cleanup in error caseChengguang Xu1-1/+1
Fix missing resource cleanup (when '(--i) == 0') for error case in pmcraid_register_interrupt_handler(). Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Dan Carpenter <[email protected]> Signed-off-by: Chengguang Xu <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-06-07scsi: ipr: Fix missing/incorrect resource cleanup in error caseChengguang Xu1-2/+2
Fix missing resource cleanup (when '(--i) == 0') for error case in ipr_alloc_mem() and skip incorrect resource cleanup (when '(--i) == 0') for error case in ipr_request_other_msi_irqs() because variable i started from 1. Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Dan Carpenter <[email protected]> Acked-by: Brian King <[email protected]> Signed-off-by: Chengguang Xu <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-06-07scsi: mpt3sas: Fix out-of-bounds compiler warningHelge Deller1-11/+12
I'm facing this warning when building for the parisc64 architecture: drivers/scsi/mpt3sas/mpt3sas_base.c: In function ‘_base_make_ioc_operational’: drivers/scsi/mpt3sas/mpt3sas_base.c:5396:40: warning: array subscript ‘Mpi2SasIOUnitPage1_t {aka struct _MPI2_CONFIG_PAGE_SASIOUNIT_1}[0]’ is partly outside array bounds of ‘unsigned char[20]’ [-Warray-bounds] 5396 | (le16_to_cpu(sas_iounit_pg1->SASWideMaxQueueDepth)) ? drivers/scsi/mpt3sas/mpt3sas_base.c:5382:26: note: referencing an object of size 20 allocated by ‘kzalloc’ 5382 | sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL); | ^~~~~~~~~~~~~~~~~~~~~~~ The problem is, that only 20 bytes are allocated with kmalloc(), which is sufficient to hold the bytes which are needed. Nevertheless, gcc complains because the whole Mpi2SasIOUnitPage1_t struct is 32 bytes in size and thus doesn't fit into those 20 bytes. This patch simply allocates all 32 bytes (instead of 20) and thus avoids the warning. There is no functional change introduced by this patch. While touching the code I cleaned up to calculation of max_wideport_qd, max_narrowport_qd and max_sata_qd to make it easier readable. Test successfully tested on a HP C8000 PA-RISC workstation with 64-bit kernel. Link: https://lore.kernel.org/r/YpZ197iZdDZSCzrT@p100 Signed-off-by: Helge Deller <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-06-07scsi: lpfc: Update lpfc version to 14.2.0.4James Smart1-1/+1
Update lpfc version to 14.2.0.4 Link: https://lore.kernel.org/r/[email protected] Co-developed-by: Justin Tee <[email protected]> Signed-off-by: Justin Tee <[email protected]> Signed-off-by: James Smart <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-06-07scsi: lpfc: Allow reduced polling rate for nvme_admin_async_event cmd completionJames Smart2-2/+12
NVMe Asynchronous Event Request commands have no command timeout value per specifications. Set WQE option to allow a reduced FLUSH polling rate for I/O error detection specifically for nvme_admin_async_event commands. Link: https://lore.kernel.org/r/[email protected] Co-developed-by: Justin Tee <[email protected]> Signed-off-by: Justin Tee <[email protected]> Signed-off-by: James Smart <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-06-07scsi: lpfc: Add more logging of cmd and cqe information for aborted NVMe cmdsJames Smart1-8/+27
When an NVMe command is aborted or completes with an ERSP, log the opcode and command ID fields to help provide more detail on the failed command. Link: https://lore.kernel.org/r/[email protected] Co-developed-by: Justin Tee <[email protected]> Signed-off-by: Justin Tee <[email protected]> Signed-off-by: James Smart <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-06-07scsi: lpfc: Fix port stuck in bypassed state after LIP in PT2PT topologyJames Smart1-1/+2
After issuing a LIP, a specific target vendor does not ACC the FLOGI that lpfc sends. However, it does send its own FLOGI that lpfc ACCs. The target then establishes the port IDs by sending a PLOGI. lpfc PLOGI_ACCs and starts the RPI registration for DID 0x000001. The target then sends a LOGO to the fabric DID. lpfc is currently treating the LOGO from the fabric DID as a link down and cleans up all the ndlps. The ndlp for DID 0x000001 is put back into NPR and discovery stops, leaving the port in stuck in bypassed mode. Change lpfc behavior such that if a LOGO is received for the fabric DID in PT2PT topology skip the lpfc_linkdown_port() routine and just move the fabric DID back to NPR. Link: https://lore.kernel.org/r/[email protected] Co-developed-by: Justin Tee <[email protected]> Signed-off-by: Justin Tee <[email protected]> Signed-off-by: James Smart <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-06-07scsi: lpfc: Resolve NULL ptr dereference after an ELS LOGO is abortedJames Smart1-12/+9
A use-after-free crash can occur after an ELS LOGO is aborted. Specifically, a nodelist structure is freed and then ndlp->vport->cfg_log_verbose is dereferenced in lpfc_nlp_get() when the discovery state machine is mistakenly called a second time with NLP_EVT_DEVICE_RM argument. Rework lpfc_cmpl_els_logo() to prevent the duplicate calls to release a nodelist structure. Link: https://lore.kernel.org/r/[email protected] Co-developed-by: Justin Tee <[email protected]> Signed-off-by: Justin Tee <[email protected]> Signed-off-by: James Smart <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-06-07scsi: lpfc: Address NULL pointer dereference after starget_to_rport()James Smart1-0/+6
Calls to starget_to_rport() may return NULL. Add check for NULL rport before dereference. Link: https://lore.kernel.org/r/[email protected] Fixes: bb21fc9911ee ("scsi: lpfc: Use fc_block_rport()") Cc: <[email protected]> # v5.18 Co-developed-by: Justin Tee <[email protected]> Signed-off-by: Justin Tee <[email protected]> Signed-off-by: James Smart <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-06-07scsi: lpfc: Resolve some cleanup issues following SLI path refactoringJames Smart2-14/+13
Following refactoring and consolidation in SLI processing, fix up some minor issues related to SLI path: - Correct the setting of LPFC_EXCHANGE_BUSY flag in response IOCB. - Fix some typographical errors. - Fix duplicate log messages. Link: https://lore.kernel.org/r/[email protected] Fixes: 1b64aa9eae28 ("scsi: lpfc: SLI path split: Refactor fast and slow paths to native SLI4") Cc: <[email protected]> # v5.18 Co-developed-by: Justin Tee <[email protected]> Signed-off-by: Justin Tee <[email protected]> Signed-off-by: James Smart <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-06-07scsi: lpfc: Resolve some cleanup issues following abort path refactoringJames Smart2-5/+5
Refactoring and consolidation of abort paths: - lpfc_sli4_abort_fcp_cmpl() and lpfc_sli_abort_fcp_cmpl() are combined into a single generic lpfc_sli_abort_fcp_cmpl() routine. Thus, remove extraneous lpfc_sli4_abort_fcp_cmpl() prototype declaration. - lpfc_nvme_abort_fcreq_cmpl() abort completion routine is called with a mismatched argument type. This may result in misleading log message content. Update to the correct argument type of lpfc_iocbq instead of lpfc_wcqe_complete. The lpfc_wcqe_complete should be derived from the lpfc_iocbq structure. Link: https://lore.kernel.org/r/[email protected] Fixes: 31a59f75702f ("scsi: lpfc: SLI path split: Refactor Abort paths") Cc: <[email protected]> # v5.18 Co-developed-by: Justin Tee <[email protected]> Signed-off-by: Justin Tee <[email protected]> Signed-off-by: James Smart <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-06-07scsi: lpfc: Correct BDE type for XMIT_SEQ64_WQE in lpfc_ct_reject_event()James Smart1-1/+1
A previous commit assumed all XMIT_SEQ64_WQEs are prepped with the correct BDE type in word 0-2. However, lpfc_ct_reject_event() routine was missed and is still filling out the incorrect BDE type. Fix lpfc_ct_reject_event() routine so that type BUFF_TYPE_BDE_64 is set instead of BUFF_TYPE_BLP_64. Link: https://lore.kernel.org/r/[email protected] Fixes: 596fc8adb171 ("scsi: lpfc: Fix dmabuf ptr assignment in lpfc_ct_reject_event()") Co-developed-by: Justin Tee <[email protected]> Signed-off-by: Justin Tee <[email protected]> Signed-off-by: James Smart <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-06-07scsi: vmw_pvscsi: Expand vcpuHint to 16 bitsWentao Wang1-2/+2
vcpuHint has been expanded to 16 bit on host to enable routing to more CPUs. Guest side should align with the change. This change has been tested with hosts with 8-bit and 16-bit vcpuHint, on both platforms host side can get correct value. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Wentao Wang <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-06-07scsi: sd: Fix interpretation of VPD B9h lengthTyler Erickson1-1/+1
Fixing the interpretation of the length of the B9h VPD page (Concurrent Positioning Ranges). Adding 4 is necessary as the first 4 bytes of the page is the header with page number and length information. Adding 3 was likely a misinterpretation of the SBC-5 specification which sets all offsets starting at zero. This fixes the error in dmesg: [ 9.014456] sd 1:0:0:0: [sda] Invalid Concurrent Positioning Ranges VPD page Link: https://lore.kernel.org/r/[email protected] Fixes: e815d36548f0 ("scsi: sd: add concurrent positioning ranges support") Cc: [email protected] Tested-by: Michael English <[email protected]> Reviewed-by: Muhammad Ahmad <[email protected]> Reviewed-by: Damien Le Moal <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Signed-off-by: Tyler Erickson <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-06-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfJakub Kicinski8-35/+98
Pablo Neira Ayuso says: ==================== Netfilter fixes for net 1) Fix NAT support for NFPROTO_INET without layer 3 address, from Florian Westphal. 2) Use kfree_rcu(ptr, rcu) variant in nf_tables clean_net path. 3) Use list to collect flowtable hooks to be deleted. 4) Initialize list of hook field in flowtable transaction. 5) Release hooks on error for flowtable updates. 6) Memleak in hardware offload rule commit and abort paths. 7) Early bail out in case device does not support for hardware offload. This adds a new interface to net/core/flow_offload.c to check if the flow indirect block list is empty. * git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: bail out early if hardware offload is not supported netfilter: nf_tables: memleak flow rule from commit path netfilter: nf_tables: release new hooks on unsupported flowtable flags netfilter: nf_tables: always initialize flowtable hook list in transaction netfilter: nf_tables: delete flowtable hooks via transaction list netfilter: nf_tables: use kfree_rcu(ptr, rcu) to release hooks in clean_net path netfilter: nat: really support inet nat without l3 address ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-06-07Merge tag 'input-for-v5.19-rc1' of ↵Linus Torvalds3-3/+9
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - proper annotation of USB buffers in bcm5974 touchpad dirver - a quirk in SOC button driver to handle Lenovo Yoga Tablet2 1051F - a fix for missing dependency in raspberrypi-ts driver to avoid compile breakages with random configs. * tag 'input-for-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: soc_button_array - also add Lenovo Yoga Tablet2 1051F to dmi_use_low_level_irq Input: bcm5974 - set missing URB_NO_TRANSFER_DMA_MAP urb flag Input: raspberrypi-ts - add missing HAS_IOMEM dependency
2022-06-07Merge tag 'mmc-v5.19-2' of ↵Linus Torvalds4-4/+7
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "MMC core: - Fix CQE recovery reset success for block I/O MMC host: - sdhci-pci-gli: Fix support for runtime resume - Fix unevaluatedProperties warnings in DT examples" * tag 'mmc-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: dt-bindings: mmc: Fix unevaluatedProperties warnings in examples mmc: block: Fix CQE recovery reset success mmc: sdhci-pci-gli: Fix GL9763E runtime PM when the system resumes from suspend
2022-06-07Input: soc_button_array - also add Lenovo Yoga Tablet2 1051F to ↵Marius Hoch1-2/+2
dmi_use_low_level_irq Commit 223f61b8c5ad ("Input: soc_button_array - add Lenovo Yoga Tablet2 1051L to the dmi_use_low_level_irq list") added the 1051L to this list already, but the same problem applies to the 1051F. As there are no further 1051 variants (just the F/L), we can just DMI match 1051. Tested on a Lenovo Yoga Tablet2 1051F: Without this patch the home-button stops working after a wakeup from suspend. Signed-off-by: Marius Hoch <[email protected]> Reviewed-by: Hans de Goede <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2022-06-07Input: bcm5974 - set missing URB_NO_TRANSFER_DMA_MAP urb flagMathias Nyman1-1/+6
The bcm5974 driver does the allocation and dma mapping of the usb urb data buffer, but driver does not set the URB_NO_TRANSFER_DMA_MAP flag to let usb core know the buffer is already mapped. usb core tries to map the already mapped buffer, causing a warning: "xhci_hcd 0000:00:14.0: rejecting DMA map of vmalloc memory" Fix this by setting the URB_NO_TRANSFER_DMA_MAP, letting usb core know buffer is already mapped by bcm5974 driver Signed-off-by: Mathias Nyman <[email protected]> Cc: [email protected] Link: https://bugzilla.kernel.org/show_bug.cgi?id=215890 Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2022-06-07drm/amdgpu: Add MODE register to wave debug info in gfx11Joseph Greathouse1-0/+1
All other chips, from gfx6-gfx10, now include the MODE register at the end of the wave debug state. This appears to have been missed in gfx11, so this patch adds in MODE to the debug state for gfx11. Signed-off-by: Joseph Greathouse <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-06-07Revert "drm/amd/display: Pass the new context into disable OTG WA"Nicholas Kazlauskas3-12/+12
This reverts commit 8440f57532496d398a461887e56ca6f45089fbcf. Causes a hang when hotplugging DP, shutting down system, or enabling dual eDP. Reviewed-by: Dmytro Laktyushkin <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Nicholas Kazlauskas <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-06-07Revert "drm/amdgpu: Ensure the DMA engine is deactivated during set ups"Guchun Chen1-64/+45
This reverts commit b992a19085885c096b19625a85c674cb89829ca1. This causes regression in GPU reset related test. Cc: Alexander Deucher <[email protected]> Cc: [email protected] Signed-off-by: Guchun Chen <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-06-07ixgbe: fix unexpected VLAN Rx in promisc mode on VFOlivier Matz1-2/+2
When the promiscuous mode is enabled on a VF, the IXGBE_VMOLR_VPE bit (VLAN Promiscuous Enable) is set. This means that the VF will receive packets whose VLAN is not the same than the VLAN of the VF. For instance, in this situation: ┌────────┐ ┌────────┐ ┌────────┐ │ │ │ │ │ │ │ │ │ │ │ │ │ VF0├────┤VF1 VF2├────┤VF3 │ │ │ │ │ │ │ └────────┘ └────────┘ └────────┘ VM1 VM2 VM3 vf 0: vlan 1000 vf 1: vlan 1000 vf 2: vlan 1001 vf 3: vlan 1001 If we tcpdump on VF3, we see all the packets, even those transmitted on vlan 1000. This behavior prevents to bridge VF1 and VF2 in VM2, because it will create a loop: packets transmitted on VF1 will be received by VF2 and vice-versa, and bridged again through the software bridge. This patch remove the activation of VLAN Promiscuous when a VF enables the promiscuous mode. However, the IXGBE_VMOLR_UPE bit (Unicast Promiscuous) is kept, so that a VF receives all packets that has the same VLAN, whatever the destination MAC address. Fixes: 8443c1a4b192 ("ixgbe, ixgbevf: Add new mbox API xcast mode") Cc: [email protected] Cc: Nicolas Dichtel <[email protected]> Signed-off-by: Olivier Matz <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-06-07ixgbe: fix bcast packets Rx on VF after promisc removalOlivier Matz1-2/+2
After a VF requested to remove the promiscuous flag on an interface, the broadcast packets are not received anymore. This breaks some protocols like ARP. In ixgbe_update_vf_xcast_mode(), we should keep the IXGBE_VMOLR_BAM bit (Broadcast Accept) on promiscuous removal. This flag is already set by default in ixgbe_set_vmolr() on VF reset. Fixes: 8443c1a4b192 ("ixgbe, ixgbevf: Add new mbox API xcast mode") Cc: [email protected] Cc: Nicolas Dichtel <[email protected]> Signed-off-by: Olivier Matz <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-06-07kernel/reboot: Fix powering off using a non-syscall code pathsDmitry Osipenko1-20/+26
There are other methods of powering off machine than the reboot syscall. Previously we missed to cover those methods and it created power-off regression for some machines, like the PowerPC e500. Fix this problem by moving the legacy sys-off handler registration to the latest phase of power-off process and making the kernel_can_power_off() check the legacy pm_power_off presence. Tested-by: Michael Ellerman <[email protected]> # ppce500 Reported-by: Michael Ellerman <[email protected]> # ppce500 Fixes: da007f171fc9 ("kernel/reboot: Change registration order of legacy power-off handler") Signed-off-by: Dmitry Osipenko <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2022-06-07selftests/bpf: Add selftest for calling global functions from freplaceToke Høiland-Jørgensen2-0/+32
Add a selftest that calls a global function with a context object parameter from an freplace function to check that the program context type is correctly converted to the freplace target when fetching the context type from the kernel BTF. v2: - Trim includes - Get rid of global function - Use __noinline Signed-off-by: Toke Høiland-Jørgensen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2022-06-07bpf: Fix calling global functions from BPF_PROG_TYPE_EXT programsToke Høiland-Jørgensen1-1/+2
The verifier allows programs to call global functions as long as their argument types match, using BTF to check the function arguments. One of the allowed argument types to such global functions is PTR_TO_CTX; however the check for this fails on BPF_PROG_TYPE_EXT functions because the verifier uses the wrong type to fetch the vmlinux BTF ID for the program context type. This failure is seen when an XDP program is loaded using libxdp (which loads it as BPF_PROG_TYPE_EXT and attaches it to a global XDP type program). Fix the issue by passing in the target program type instead of the BPF_PROG_TYPE_EXT type to bpf_prog_get_ctx() when checking function argument compatibility. The first Fixes tag refers to the latest commit that touched the code in question, while the second one points to the code that first introduced the global function call verification. v2: - Use resolve_prog_type() Fixes: 3363bd0cfbb8 ("bpf: Extend kfunc with PTR_TO_CTX, PTR_TO_MEM argument support") Fixes: 51c39bb1d5d1 ("bpf: Introduce function-by-function verification") Reported-by: Simon Sundberg <[email protected]> Signed-off-by: Toke Høiland-Jørgensen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2022-06-07bpf: Use safer kvmalloc_array() where possibleDan Carpenter1-4/+4
The kvmalloc_array() function is safer because it has a check for integer overflows. These sizes come from the user and I was not able to see any bounds checking so an integer overflow seems like a realistic concern. Fixes: 0dcac2725406 ("bpf: Add multi kprobe link") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/Yo9VRVMeHbALyjUH@kili Signed-off-by: Alexei Starovoitov <[email protected]>
2022-06-07bpf, arm64: Clear prog->jited_len along prog->jitedEric Dumazet1-0/+1
syzbot reported an illegal copy_to_user() attempt from bpf_prog_get_info_by_fd() [1] There was no repro yet on this bug, but I think that commit 0aef499f3172 ("mm/usercopy: Detect vmalloc overruns") is exposing a prior bug in bpf arm64. bpf_prog_get_info_by_fd() looks at prog->jited_len to determine if the JIT image can be copied out to user space. My theory is that syzbot managed to get a prog where prog->jited_len has been set to 43, while prog->bpf_func has ben cleared. It is not clear why copy_to_user(uinsns, NULL, ulen) is triggering this particular warning. I thought find_vma_area(NULL) would not find a vm_struct. As we do not hold vmap_area_lock spinlock, it might be possible that the found vm_struct was garbage. [1] usercopy: Kernel memory exposure attempt detected from vmalloc (offset 792633534417210172, size 43)! kernel BUG at mm/usercopy.c:101! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 25002 Comm: syz-executor.1 Not tainted 5.18.0-syzkaller-10139-g8291eaafed36 #0 Hardware name: linux,dummy-virt (DT) pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : usercopy_abort+0x90/0x94 mm/usercopy.c:101 lr : usercopy_abort+0x90/0x94 mm/usercopy.c:89 sp : ffff80000b773a20 x29: ffff80000b773a30 x28: faff80000b745000 x27: ffff80000b773b48 x26: 0000000000000000 x25: 000000000000002b x24: 0000000000000000 x23: 00000000000000e0 x22: ffff80000b75db67 x21: 0000000000000001 x20: 000000000000002b x19: ffff80000b75db3c x18: 00000000fffffffd x17: 2820636f6c6c616d x16: 76206d6f72662064 x15: 6574636574656420 x14: 74706d6574746120 x13: 2129333420657a69 x12: 73202c3237313031 x11: 3237313434333533 x10: 3336323937207465 x9 : 657275736f707865 x8 : ffff80000a30c550 x7 : ffff80000b773830 x6 : ffff80000b773830 x5 : 0000000000000000 x4 : ffff00007fbbaa10 x3 : 0000000000000000 x2 : 0000000000000000 x1 : f7ff000028fc0000 x0 : 0000000000000064 Call trace: usercopy_abort+0x90/0x94 mm/usercopy.c:89 check_heap_object mm/usercopy.c:186 [inline] __check_object_size mm/usercopy.c:252 [inline] __check_object_size+0x198/0x36c mm/usercopy.c:214 check_object_size include/linux/thread_info.h:199 [inline] check_copy_size include/linux/thread_info.h:235 [inline] copy_to_user include/linux/uaccess.h:159 [inline] bpf_prog_get_info_by_fd.isra.0+0xf14/0xfdc kernel/bpf/syscall.c:3993 bpf_obj_get_info_by_fd+0x12c/0x510 kernel/bpf/syscall.c:4253 __sys_bpf+0x900/0x2150 kernel/bpf/syscall.c:4956 __do_sys_bpf kernel/bpf/syscall.c:5021 [inline] __se_sys_bpf kernel/bpf/syscall.c:5019 [inline] __arm64_sys_bpf+0x28/0x40 kernel/bpf/syscall.c:5019 __invoke_syscall arch/arm64/kernel/syscall.c:38 [inline] invoke_syscall+0x48/0x114 arch/arm64/kernel/syscall.c:52 el0_svc_common.constprop.0+0x44/0xec arch/arm64/kernel/syscall.c:142 do_el0_svc+0xa0/0xc0 arch/arm64/kernel/syscall.c:206 el0_svc+0x44/0xb0 arch/arm64/kernel/entry-common.c:624 el0t_64_sync_handler+0x1ac/0x1b0 arch/arm64/kernel/entry-common.c:642 el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:581 Code: aa0003e3 d00038c0 91248000 97fff65f (d4210000) Fixes: db496944fdaa ("bpf: arm64: add JIT support for multi-function programs") Reported-by: syzbot <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Song Liu <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2022-06-07workqueue: Fix type of cpu in trace eventWonhyuk Yang1-4/+4
The trace event "workqueue_queue_work" use unsigned int type for req_cpu, cpu. This casue confusing cpu number like below log. $ cat /sys/kernel/debug/tracing/trace cat-317 [001] ...: workqueue_queue_work: ... req_cpu=8192 cpu=4294967295 So, change unsigned type to signed type in the trace event. After applying this patch, cpu number will be printed as -1 instead of 4294967295 as folllows. $ cat /sys/kernel/debug/tracing/trace cat-1338 [002] ...: workqueue_queue_work: ... req_cpu=8192 cpu=-1 Cc: Baik Song An <[email protected]> Cc: Hong Yeon Kim <[email protected]> Cc: Taeung Song <[email protected]> Cc: [email protected] Signed-off-by: Wonhyuk Yang <[email protected]> Signed-off-by: Tejun Heo <[email protected]>
2022-06-07workqueue: Wrap flush_workqueue() using a macroTetsuo Handa2-12/+68
Since flush operation synchronously waits for completion, flushing system-wide WQs (e.g. system_wq) might introduce possibility of deadlock due to unexpected locking dependency. Tejun Heo commented at [1] that it makes no sense at all to call flush_workqueue() on the shared WQs as the caller has no idea what it's gonna end up waiting for. Although there is flush_scheduled_work() which flushes system_wq WQ with "Think twice before calling this function! It's very easy to get into trouble if you don't take great care." warning message, syzbot found a circular locking dependency caused by flushing system_wq WQ [2]. Therefore, let's change the direction to that developers had better use their local WQs if flush_scheduled_work()/flush_workqueue(system_*_wq) is inevitable. Steps for converting system-wide WQs into local WQs are explained at [3], and a conversion to stop flushing system-wide WQs is in progress. Now we want some mechanism for preventing developers who are not aware of this conversion from again start flushing system-wide WQs. Since I found that WARN_ON() is complete but awkward approach for teaching developers about this problem, let's use __compiletime_warning() for incomplete but handy approach. For completeness, we will also insert WARN_ON() into __flush_workqueue() after all in-tree users stopped calling flush_scheduled_work(). Link: https://lore.kernel.org/all/YgnQGZWT%[email protected]/ [1] Link: https://syzkaller.appspot.com/bug?extid=bde0f89deacca7c765b8 [2] Link: https://lkml.kernel.org/r/[email protected] [3] Signed-off-by: Tetsuo Handa <[email protected]> Signed-off-by: Tejun Heo <[email protected]>
2022-06-08kbuild: avoid regex RS for POSIX awkKevin Locke1-2/+2
In 22f26f21774f8 awk was added to deduplicate *.mod files. The awk invocation passes -v RS='( |\n)' to match a space or newline character as the record separator. Unfortunately, POSIX states[1] > If RS contains more than one character, the results are unspecified. Some implementations (such as the One True Awk[2] used by the BSDs) do not treat RS as a regular expression. When awk does not support regex RS, build failures such as the following are produced (first error using allmodconfig): CC [M] arch/x86/events/intel/uncore.o CC [M] arch/x86/events/intel/uncore_nhmex.o CC [M] arch/x86/events/intel/uncore_snb.o CC [M] arch/x86/events/intel/uncore_snbep.o CC [M] arch/x86/events/intel/uncore_discovery.o LD [M] arch/x86/events/intel/intel-uncore.o ld: cannot find uncore_nhmex.o: No such file or directory ld: cannot find uncore_snb.o: No such file or directory ld: cannot find uncore_snbep.o: No such file or directory ld: cannot find uncore_discovery.o: No such file or directory make[3]: *** [scripts/Makefile.build:422: arch/x86/events/intel/intel-uncore.o] Error 1 make[2]: *** [scripts/Makefile.build:487: arch/x86/events/intel] Error 2 make[1]: *** [scripts/Makefile.build:487: arch/x86/events] Error 2 make: *** [Makefile:1839: arch/x86] Error 2 To avoid this, use printf(1) to produce a newline between each object path, instead of the space produced by echo(1), so that the default RS can be used by awk. [1]: https://pubs.opengroup.org/onlinepubs/9699919799/utilities/awk.html [2]: https://github.com/onetrueawk/awk Fixes: 22f26f21774f ("kbuild: get rid of duplication in *.mod files") Signed-off-by: Kevin Locke <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2022-06-07dt-bindings: Drop more redundant 'maxItems/minItems' in if/then schemasRob Herring3-5/+0
Another round from new cases in 5.19-rc of removing redundant minItems/maxItems when 'items' list is specified. This time it is in if/then schemas as the meta-schema was failing to check this case. If a property has an 'items' list, then a 'minItems' or 'maxItems' with the same size as the list is redundant and can be dropped. Note that is DT schema specific behavior and not standard json-schema behavior. The tooling will fixup the final schema adding any unspecified minItems/maxItems. Signed-off-by: Rob Herring <[email protected]> Acked-by: Guenter Roeck <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Acked-by: Ulf Hansson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-06-07dt-bindings: nvme: apple,nvme-ans: Drop 'maxItems' from 'apple,sart'Rob Herring1-1/+0
A 'phandle' type is always a single cell, so 'maxItems: 1' is redundant. Fixes: 82b96552f15a ("dt-bindings: nvme: Add Apple ANS NVMe") Signed-off-by: Rob Herring <[email protected]> Reviewed-by: Sven Peter <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-06-07KVM: SVM: fix tsc scaling cache logicMaxim Levitsky3-15/+23
SVM uses a per-cpu variable to cache the current value of the tsc scaling multiplier msr on each cpu. Commit 1ab9287add5e2 ("KVM: X86: Add vendor callbacks for writing the TSC multiplier") broke this caching logic. Refactor the code so that all TSC scaling multiplier writes go through a single function which checks and updates the cache. This fixes the following scenario: 1. A CPU runs a guest with some tsc scaling ratio. 2. New guest with different tsc scaling ratio starts on this CPU and terminates almost immediately. This ensures that the short running guest had set the tsc scaling ratio just once when it was set via KVM_SET_TSC_KHZ. Due to the bug, the per-cpu cache is not updated. 3. The original guest continues to run, it doesn't restore the msr value back to its own value, because the cache matches, and thus continues to run with a wrong tsc scaling ratio. Fixes: 1ab9287add5e2 ("KVM: X86: Add vendor callbacks for writing the TSC multiplier") Signed-off-by: Maxim Levitsky <[email protected]> Message-Id: <[email protected]> Cc: [email protected] Signed-off-by: Paolo Bonzini <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.