aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-07-12i2c: recovery: if possible send STOP with recovery pulsesWolfram Sang1-1/+10
I2C clients may misunderstand recovery pulses if they can't read SDA to bail out early. In the worst case, as a write operation. To avoid that and if we can write SDA, try to send STOP to avoid the misinterpretation. Signed-off-by: Wolfram Sang <[email protected]> Reviewed-by: Peter Rosin <[email protected]> Signed-off-by: Wolfram Sang <[email protected]> Cc: [email protected]
2018-07-12tcp: allow user to create repair socket without window probesStefan Baranoff1-3/+5
Under rare conditions where repair code may be used it is possible that window probes are either unnecessary or undesired. If the user knows that window probes are not wanted or needed this change allows them to skip sending them when a socket comes out of repair. Signed-off-by: Stefan Baranoff <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-07-12tcp: fix sequence numbers for repaired sockets re-using TIME-WAIT socketsStefan Baranoff1-5/+18
This patch fixes a bug where the sequence numbers of a socket created using TCP repair functionality are lower than set after connect is called. This occurs when the repair socket overlaps with a TIME-WAIT socket and triggers the re-use code. The amount lower is equal to the number of times that a particular IP/port set is re-used and then put back into TIME-WAIT. Re-using the first time the sequence number is 1 lower, closing that socket and then re-opening (with repair) a new socket with the same addresses/ports puts the sequence number 2 lower than set via setsockopt. The third time is 3 lower, etc. I have not tested what the limit of this acrewal is, if any. The fix is, if a socket is in repair mode, to respect the already set sequence number and timestamp when it would have already re-used the TIME-WAIT socket. Signed-off-by: Stefan Baranoff <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-07-12bpf: don't leave partial mangled prog in jit_subprogs error pathDaniel Borkmann1-2/+9
syzkaller managed to trigger the following bug through fault injection: [...] [ 141.043668] verifier bug. No program starts at insn 3 [ 141.044648] WARNING: CPU: 3 PID: 4072 at kernel/bpf/verifier.c:1613 get_callee_stack_depth kernel/bpf/verifier.c:1612 [inline] [ 141.044648] WARNING: CPU: 3 PID: 4072 at kernel/bpf/verifier.c:1613 fixup_call_args kernel/bpf/verifier.c:5587 [inline] [ 141.044648] WARNING: CPU: 3 PID: 4072 at kernel/bpf/verifier.c:1613 bpf_check+0x525e/0x5e60 kernel/bpf/verifier.c:5952 [ 141.047355] CPU: 3 PID: 4072 Comm: a.out Not tainted 4.18.0-rc4+ #51 [ 141.048446] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),BIOS 1.10.2-1 04/01/2014 [ 141.049877] Call Trace: [ 141.050324] __dump_stack lib/dump_stack.c:77 [inline] [ 141.050324] dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113 [ 141.050950] ? dump_stack_print_info.cold.2+0x52/0x52 lib/dump_stack.c:60 [ 141.051837] panic+0x238/0x4e7 kernel/panic.c:184 [ 141.052386] ? add_taint.cold.5+0x16/0x16 kernel/panic.c:385 [ 141.053101] ? __warn.cold.8+0x148/0x1ba kernel/panic.c:537 [ 141.053814] ? __warn.cold.8+0x117/0x1ba kernel/panic.c:530 [ 141.054506] ? get_callee_stack_depth kernel/bpf/verifier.c:1612 [inline] [ 141.054506] ? fixup_call_args kernel/bpf/verifier.c:5587 [inline] [ 141.054506] ? bpf_check+0x525e/0x5e60 kernel/bpf/verifier.c:5952 [ 141.055163] __warn.cold.8+0x163/0x1ba kernel/panic.c:538 [ 141.055820] ? get_callee_stack_depth kernel/bpf/verifier.c:1612 [inline] [ 141.055820] ? fixup_call_args kernel/bpf/verifier.c:5587 [inline] [ 141.055820] ? bpf_check+0x525e/0x5e60 kernel/bpf/verifier.c:5952 [...] What happens in jit_subprogs() is that kcalloc() for the subprog func buffer is failing with NULL where we then bail out. Latter is a plain return -ENOMEM, and this is definitely not okay since earlier in the loop we are walking all subprogs and temporarily rewrite insn->off to remember the subprog id as well as insn->imm to temporarily point the call to __bpf_call_base + 1 for the initial JIT pass. Thus, bailing out in such state and handing this over to the interpreter is troublesome since later/subsequent e.g. find_subprog() lookups are based on wrong insn->imm. Therefore, once we hit this point, we need to jump to out_free path where we undo all changes from earlier loop, so that interpreter can work on unmodified insn->{off,imm}. Another point is that should find_subprog() fail in jit_subprogs() due to a verifier bug, then we also should not simply defer the program to the interpreter since also here we did partial modifications. Instead we should just bail out entirely and return an error to the user who is trying to load the program. Fixes: 1c2a088a6626 ("bpf: x64: add JIT support for multi-function programs") Reported-by: [email protected] Signed-off-by: Daniel Borkmann <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2018-07-12sch_fq_codel: zero q->flows_cnt when fq_codel_init failsJacob Keller1-7/+18
When fq_codel_init fails, qdisc_create_dflt will cleanup by using qdisc_destroy. This function calls the ->reset() op prior to calling the ->destroy() op. Unfortunately, during the failure flow for sch_fq_codel, the ->flows parameter is not initialized, so the fq_codel_reset function will null pointer dereference. kernel: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 kernel: IP: fq_codel_reset+0x58/0xd0 [sch_fq_codel] kernel: PGD 0 P4D 0 kernel: Oops: 0000 [#1] SMP PTI kernel: Modules linked in: i40iw i40e(OE) xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack tun bridge stp llc devlink ebtable_filter ebtables ip6table_filter ip6_tables rpcrdma ib_isert iscsi_target_mod sunrpc ib_iser libiscsi scsi_transport_iscsi ib_srpt target_core_mod ib_srp scsi_transport_srp ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm intel_rapl sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel intel_cstate iTCO_wdt iTCO_vendor_support intel_uncore ib_core intel_rapl_perf mei_me mei joydev i2c_i801 lpc_ich ioatdma shpchp wmi sch_fq_codel xfs libcrc32c mgag200 ixgbe drm_kms_helper isci ttm firewire_ohci kernel: mdio drm igb libsas crc32c_intel firewire_core ptp pps_core scsi_transport_sas crc_itu_t dca i2c_algo_bit ipmi_si ipmi_devintf ipmi_msghandler [last unloaded: i40e] kernel: CPU: 10 PID: 4219 Comm: ip Tainted: G OE 4.16.13custom-fq-codel-test+ #3 kernel: Hardware name: Intel Corporation S2600CO/S2600CO, BIOS SE5C600.86B.02.05.0004.051120151007 05/11/2015 kernel: RIP: 0010:fq_codel_reset+0x58/0xd0 [sch_fq_codel] kernel: RSP: 0018:ffffbfbf4c1fb620 EFLAGS: 00010246 kernel: RAX: 0000000000000400 RBX: 0000000000000000 RCX: 00000000000005b9 kernel: RDX: 0000000000000000 RSI: ffff9d03264a60c0 RDI: ffff9cfd17b31c00 kernel: RBP: 0000000000000001 R08: 00000000000260c0 R09: ffffffffb679c3e9 kernel: R10: fffff1dab06a0e80 R11: ffff9cfd163af800 R12: ffff9cfd17b31c00 kernel: R13: 0000000000000001 R14: ffff9cfd153de600 R15: 0000000000000001 kernel: FS: 00007fdec2f92800(0000) GS:ffff9d0326480000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 0000000000000008 CR3: 0000000c1956a006 CR4: 00000000000606e0 kernel: Call Trace: kernel: qdisc_destroy+0x56/0x140 kernel: qdisc_create_dflt+0x8b/0xb0 kernel: mq_init+0xc1/0xf0 kernel: qdisc_create_dflt+0x5a/0xb0 kernel: dev_activate+0x205/0x230 kernel: __dev_open+0xf5/0x160 kernel: __dev_change_flags+0x1a3/0x210 kernel: dev_change_flags+0x21/0x60 kernel: do_setlink+0x660/0xdf0 kernel: ? down_trylock+0x25/0x30 kernel: ? xfs_buf_trylock+0x1a/0xd0 [xfs] kernel: ? rtnl_newlink+0x816/0x990 kernel: ? _xfs_buf_find+0x327/0x580 [xfs] kernel: ? _cond_resched+0x15/0x30 kernel: ? kmem_cache_alloc+0x20/0x1b0 kernel: ? rtnetlink_rcv_msg+0x200/0x2f0 kernel: ? rtnl_calcit.isra.30+0x100/0x100 kernel: ? netlink_rcv_skb+0x4c/0x120 kernel: ? netlink_unicast+0x19e/0x260 kernel: ? netlink_sendmsg+0x1ff/0x3c0 kernel: ? sock_sendmsg+0x36/0x40 kernel: ? ___sys_sendmsg+0x295/0x2f0 kernel: ? ebitmap_cmp+0x6d/0x90 kernel: ? dev_get_by_name_rcu+0x73/0x90 kernel: ? skb_dequeue+0x52/0x60 kernel: ? __inode_wait_for_writeback+0x7f/0xf0 kernel: ? bit_waitqueue+0x30/0x30 kernel: ? fsnotify_grab_connector+0x3c/0x60 kernel: ? __sys_sendmsg+0x51/0x90 kernel: ? do_syscall_64+0x74/0x180 kernel: ? entry_SYSCALL_64_after_hwframe+0x3d/0xa2 kernel: Code: 00 00 48 89 87 00 02 00 00 8b 87 a0 01 00 00 85 c0 0f 84 84 00 00 00 31 ed 48 63 dd 83 c5 01 48 c1 e3 06 49 03 9c 24 90 01 00 00 <48> 8b 73 08 48 8b 3b e8 6c 9a 4f f6 48 8d 43 10 48 c7 03 00 00 kernel: RIP: fq_codel_reset+0x58/0xd0 [sch_fq_codel] RSP: ffffbfbf4c1fb620 kernel: CR2: 0000000000000008 kernel: ---[ end trace e81a62bede66274e ]--- This is caused because flows_cnt is non-zero, but flows hasn't been initialized. fq_codel_init has left the private data in a partially initialized state. To fix this, reset flows_cnt to 0 when we fail to initialize. Additionally, to make the state more consistent, also cleanup the flows pointer when the allocation of backlogs fails. This fixes the NULL pointer dereference, since both the for-loop and memset in fq_codel_reset will be no-ops when flow_cnt is zero. Signed-off-by: Jacob Keller <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-07-12Merge branch '10GbE' of ↵David S. Miller4-87/+141
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2018-07-12 This series contains updates to ixgbe and e100/e1000 kernel documentation. Alex fixes ixgbe to ensure that we are more explicit about the ordering of updates to the receive address register (RAR) table. Dan Carpenter fixes an issue where we were reading one element beyond the end of the array. Mauro Carvalho Chehab fixes formatting issues in the e100.rst and e1000.rst that were causing errors during 'make htmldocs'. ==================== Signed-off-by: David S. Miller <[email protected]>
2018-07-12Merge tag 'mtd/fixes-for-4.18-rc5' of git://git.infradead.org/linux-mtdLinus Torvalds1-2/+4
Pull MTD fix from Boris Brezillon: "A SPI NOR fix to fix a timeout in the cadence QSPI controller driver" * tag 'mtd/fixes-for-4.18-rc5' of git://git.infradead.org/linux-mtd: mtd: spi-nor: cadence-quadspi: Fix direct mode write timeouts
2018-07-13kbuild: suppress warnings from 'getconf LFS_*'Masahiro Yamada1-3/+3
Suppress warnings for systems that do not recognize LFS_*. getconf: no such configuration parameter `LFS_CFLAGS' getconf: no such configuration parameter `LFS_LDFLAGS' getconf: no such configuration parameter `LFS_LIBS' Fixes: d7f14c66c273 ("kbuild: Enable Large File Support for hostprogs") Reported-by: Chen Feng <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]> Acked-by: Uwe Kleine-König <[email protected]>
2018-07-13scripts/tags.sh: add __ro_after_initConstantine Shulyupin1-1/+1
Signed-off-by: Constantine Shulyupin <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2018-07-13tools: build: Use HOSTLDFLAGS with fixdepLaura Abbott1-1/+1
The final link of fixdep uses LDFLAGS but not the existing HOSTLDFLAGS. Fix this. Signed-off-by: Laura Abbott <[email protected]> Acked-by: Jiri Olsa <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2018-07-13tools: build: Fixup host c flagsLaura Abbott2-2/+2
Commit 0c3b7e42616f ("tools build: Add support for host programs format") introduced host_c_flags which referenced CHOSTFLAGS. The actual name of the variable is HOSTCFLAGS. Fix this up. Fixes: 0c3b7e42616f ("tools build: Add support for host programs format") Signed-off-by: Laura Abbott <[email protected]> Acked-by: Jiri Olsa <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2018-07-13tools build: fix # escaping in .cmd files for future MakePaul Menzel1-2/+2
In 2016 GNU Make made a backwards incompatible change to the way '#' characters were handled in Makefiles when used inside functions or macros: http://git.savannah.gnu.org/cgit/make.git/commit/?id=c6966b323811c37acedff05b57 Due to this change, when attempting to run `make prepare' I get a spurious make syntax error: /home/earnest/linux/tools/objtool/.fixdep.o.cmd:1: *** missing separator. Stop. When inspecting `.fixdep.o.cmd' it includes two lines which use unescaped comment characters at the top: \# cannot find fixdep (/home/earnest/linux/tools/objtool//fixdep) \# using basic dep data This is because `tools/build/Build.include' prints these '\#' characters: printf '\# cannot find fixdep (%s)\n' $(fixdep) > $(dot-target).cmd; \ printf '\# using basic dep data\n\n' >> $(dot-target).cmd; \ This completes commit 9564a8cf422d ("Kbuild: fix # escaping in .cmd files for future Make"). Link: https://bugzilla.kernel.org/show_bug.cgi?id=197847 Cc: Randy Dunlap <[email protected]> Cc: Rasmus Villemoes <[email protected]> Cc: [email protected] Signed-off-by: Paul Menzel <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2018-07-12networking: e1000.rst: Get rid of Sphinx warningsMauro Carvalho Chehab1-75/+112
Documentation/networking/e1000.rst:83: ERROR: Unexpected indentation. Documentation/networking/e1000.rst:84: WARNING: Block quote ends without a blank line; unexpected unindent. Documentation/networking/e1000.rst:173: WARNING: Definition list ends without a blank line; unexpected unindent. Documentation/networking/e1000.rst:236: WARNING: Definition list ends without a blank line; unexpected unindent. While here, fix highlights and mark a table as such. Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2018-07-12networking: e100.rst: Get rid of Sphinx warningsMauro Carvalho Chehab1-10/+17
Documentation/networking/e100.rst:57: WARNING: Literal block expected; none found. Documentation/networking/e100.rst:68: WARNING: Literal block expected; none found. Documentation/networking/e100.rst:75: WARNING: Literal block expected; none found. Documentation/networking/e100.rst:84: WARNING: Literal block expected; none found. Documentation/networking/e100.rst:93: WARNING: Inline emphasis start-string without end-string. While here, fix some highlights. Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2018-07-12ixgbe: Off by one in ixgbe_ipsec_tx()Dan Carpenter1-1/+1
The ipsec->tx_tbl[] has IXGBE_IPSEC_MAX_SA_COUNT elements so the > needs to be changed to >= so we don't read one element beyond the end of the array. Fixes: 592594704761 ("ixgbe: process the Tx ipsec offload") Signed-off-by: Dan Carpenter <[email protected]> Acked-by: Shannon Nelson <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2018-07-12amd/dc/dce100: On dce100, set clocks to 0 on suspendDavid Francis1-3/+16
[Why] When a dce100 asic was suspended, the clocks were not set to 0. Upon resume, the new clock was compared to the existing clock, they were found to be the same, and so the clock was not set. This resulted in a pernicious blackscreen. [How] In atomic commit, check to see if there are any active pipes. If no, set clocks to 0 Signed-off-by: David Francis <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-12drm/amd/display: Convert 10kHz clks from PPLib into kHz for VegaHarry Wentland1-2/+3
The driver is expecting clock frequency in kHz, while SMU returns the values in 10kHz, which causes the bandwidth validation to fail 4.18 has the faulty clock assignment in pp_to_dc_clock_levels_with_latency only, which is only used by Vega. Make sure we multiply these values by 10 here, as we do for other ASICs as powerplay assigned them wrong. 4.19 has the proper fix in powerplay. v2: Add Fixes tag v3: Fixes -> Bugzilla, with simplified link Bugzilla: https://bugs.freedesktop.org/107082 Signed-off-by: Mikita Lipski <[email protected]> Signed-off-by: Harry Wentland <[email protected]> Acked-by: Michel Dänzer <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-12ixgbe: Be more careful when modifying MAC filtersAlexander Duyck1-1/+11
This change makes it so that we are much more explicit about the ordering of updates to the receive address register (RAR) table. Prior to this patch I believe we may have been updating the table while entries were still active, or possibly allowing for reordering of things since we weren't explicitly flushing writes to either the lower or upper portion of the register prior to accessing the other half. Signed-off-by: Alexander Duyck <[email protected]> Reviewed-by: Shannon Nelson <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2018-07-12ARM: dts: am3517.dtsi: Disable reference to OMAP3 OTG controllerAdam Ford1-0/+5
The AM3517 has a different OTG controller location than the OMAP3, which is included from omap3.dtsi. This results in a hwmod error. Since the AM3517 has a different OTG controller address, this patch disabes one that is isn't available. Signed-off-by: Adam Ford <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2018-07-12Merge tag 'perf-urgent-for-mingo-4.18-20180711' of ↵Ingo Molnar14-81/+84
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: python interface fixes: - Make 'perf script -g python' generate scripts that are compatible with both python 2 and 3 (Jeremy Cline) - Fix python dictionary reference counting (Janne Huttunen) - Add python3 support for various python scripts (Jeremy Cline) - Use python-config --includes rather than --cflags, fixing the build on Fedora, where the python 3.7 started adding -flto to what perf stat fixes: - Remove needless extra header line in --interval_clear (Jiri Olsa) python-config --cflags generate, breaking the perf build (Jeremy Cline) Build fixes: - Fix compilation errors on gcc8 (Jiri Olsa) perf llvm-utils fixes: - Remove bashism from kernel include fetch script (Kim Phillips) perf test fixes: (Kim Phillips) - Replace '|&' with '2>&1 |' to work with more shells - Make perf's inet_pton test more portable - Prevent temporary editor files from being considered test scripts Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2018-07-12ARM: DRA7/OMAP5: Enable ACTLR[0] (Enable invalidates of BTB) for secondary coresNishanth Menon1-0/+41
Call secure services to enable ACTLR[0] (Enable invalidates of BTB with ICIALLU) when branch hardening is enabled for kernel. On GP devices OMAP5/DRA7, there is no possibility to update secure side since "secure world" is ROM and there are no override mechanisms possible. On HS devices, appropriate PPA should do the workarounds as well. However, the configuration is only done for secondary core, since it is expected that firmware/bootloader will have enabled the required configuration for the primary boot core (note: bootloaders typically will NOT enable secondary processors, since it has no need to do so). Signed-off-by: Nishanth Menon <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2018-07-12xen: remove global bit from __default_kernel_pte_mask for pv guestsJuergen Gross1-0/+1
When removing the global bit from __supported_pte_mask do the same for __default_kernel_pte_mask in order to avoid the WARN_ONCE() in check_pgprot() when setting a kernel pte before having called init_mem_mapping(). Cc: <[email protected]> # 4.17 Reported-by: Michael Young <[email protected]> Signed-off-by: Juergen Gross <[email protected]> Reviewed-by: Boris Ostrovsky <[email protected]> Signed-off-by: Juergen Gross <[email protected]>
2018-07-12Merge branch 'ieee802154-for-davem-2018-07-11' of ↵David S. Miller5-14/+46
git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan Stefan Schmidt says: ==================== pull-request: ieee802154 for net 2018-07-11 An update from ieee802154 for your *net* tree. Build system fix for a missing include from Arnd Bergmann. Setting the IFLA_LINK for the lowpan parent from Lubomir Rintel. Fixes for some RX corner cases in adf7242 driver by Michael Hennerich. And some small patches to cleanup our BUG_ON vs WARN_ON usage. ==================== Signed-off-by: David S. Miller <[email protected]>
2018-07-12ALSA: hda/ca0132: Update a pci quirk device nameAlastair Bridgewater1-1/+1
The PCI subsystem in question for this quirk rule has been identified as a Gigabyte GA-Z170X-Gaming 7 motherboard. Set the device name appropriately. Signed-off-by: Alastair Bridgewater <[email protected]> Reviewed-by: Connor McAdams <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2018-07-12ALSA: hda/ca0132: Add Recon3Di quirk for Gigabyte G1.Sniper Z97Alastair Bridgewater1-0/+1
These motherboards have Sound Core3D and apparently "support" Recon3Di. Added to the quirk list as QUIRK_R3DI. Issue report, PCI Subsystem ID, and testing by a contributor on IRC who wished to remain anonymous. Signed-off-by: Alastair Bridgewater <[email protected]> Reviewed-by: Connor McAdams <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2018-07-12Merge tag 'gvt-fixes-2018-07-11' of https://github.com/intel/gvt-linux into ↵Rodrigo Vivi5-1/+81
drm-intel-fixes gvt-fixes-2018-07-11 - Fix KBL virtual register update from LRI for GPU hang (Henry) Signed-off-by: Rodrigo Vivi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-07-12qed: fix spelling mistake "successffuly" -> "successfully"Ewan D. Milne1-1/+1
Trivial fix to spelling mistake in qed_probe message. Signed-off-by: Ewan D. Milne <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-07-12nvme-pci: fix memory leak on probe failureKeith Busch1-5/+7
The nvme driver specific structures need to be initialized prior to enabling the generic controller so we can unwind on failure with out using the reference counting callbacks so that 'probe' and 'remove' can be symmetric. The newly added iod_mempool is the only resource that was being allocated out of order, and a failure there would leak the generic controller memory. This patch just moves that allocation above the controller initialization. Fixes: 943e942e6266f ("nvme-pci: limit max IO size and segments to avoid high order allocations") Reported-by: Weiping Zhang <[email protected]> Signed-off-by: Keith Busch <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2018-07-11sfp: fix module initialisation with netdev already upRussell King1-2/+2
It was been observed that with a particular order of initialisation, the netdev can be up, but the SFP module still has its TX_DISABLE signal asserted. This occurs when the network device brought up before the SFP kernel module has been inserted by userspace. This occurs because sfp-bus layer does not hear about the change in network device state, and so assumes that it is still down. Set netdev->sfp when the upstream is registered to work around this problem. Signed-off-by: Russell King <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-07-11sfp: ensure we clean up properly on bus registration failureRussell King1-7/+24
We fail to correctly clean up after a bus registration failure, which can lead to an incorrect assumption about the registration state of the upstream or sfp cage. Signed-off-by: Russell King <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-07-11bpf: fix panic due to oob in bpf_prog_test_run_skbDaniel Borkmann2-4/+36
sykzaller triggered several panics similar to the below: [...] [ 248.851531] BUG: KASAN: use-after-free in _copy_to_user+0x5c/0x90 [ 248.857656] Read of size 985 at addr ffff8808017ffff2 by task a.out/1425 [...] [ 248.865902] CPU: 1 PID: 1425 Comm: a.out Not tainted 4.18.0-rc4+ #13 [ 248.865903] Hardware name: Supermicro SYS-5039MS-H12TRF/X11SSE-F, BIOS 2.1a 03/08/2018 [ 248.865905] Call Trace: [ 248.865910] dump_stack+0xd6/0x185 [ 248.865911] ? show_regs_print_info+0xb/0xb [ 248.865913] ? printk+0x9c/0xc3 [ 248.865915] ? kmsg_dump_rewind_nolock+0xe4/0xe4 [ 248.865919] print_address_description+0x6f/0x270 [ 248.865920] kasan_report+0x25b/0x380 [ 248.865922] ? _copy_to_user+0x5c/0x90 [ 248.865924] check_memory_region+0x137/0x190 [ 248.865925] kasan_check_read+0x11/0x20 [ 248.865927] _copy_to_user+0x5c/0x90 [ 248.865930] bpf_test_finish.isra.8+0x4f/0xc0 [ 248.865932] bpf_prog_test_run_skb+0x6a0/0xba0 [...] After scrubbing the BPF prog a bit from the noise, turns out it called bpf_skb_change_head() for the lwt_xmit prog with headroom of 2. Nothing wrong in that, however, this was run with repeat >> 0 in bpf_prog_test_run_skb() and the same skb thus keeps changing until the pskb_expand_head() called from skb_cow() keeps bailing out in atomic alloc context with -ENOMEM. So upon return we'll basically have 0 headroom left yet blindly do the __skb_push() of 14 bytes and keep copying data from there in bpf_test_finish() out of bounds. Fix to check if we have enough headroom and if pskb_expand_head() fails, bail out with error. Another bug independent of this fix (but related in triggering above) is that BPF_PROG_TEST_RUN should be reworked to reset the skb/xdp buffer to it's original state from input as otherwise repeating the same test in a loop won't work for benchmarking when underlying input buffer is getting changed by the prog each time and reused for the next run leading to unexpected results. Fixes: 1cf1cae963c2 ("bpf: introduce BPF_PROG_TEST_RUN command") Reported-by: [email protected] Reported-by: [email protected] Signed-off-by: Daniel Borkmann <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2018-07-11ARM: 8780/1: ftrace: Only set kernel memory back to read-only after bootSteven Rostedt (VMware)1-0/+9
Dynamic ftrace requires modifying the code segments that are usually set to read-only. To do this, a per arch function is called both before and after the ftrace modifications are performed. The "before" function will set kernel code text to read-write to allow for ftrace to make the modifications, and the "after" function will set the kernel code text back to "read-only" to keep the kernel code text protected. The issue happens when dynamic ftrace is tested at boot up. The test is done before the kernel code text has been set to read-only. But the "before" and "after" calls are still performed. The "after" call will change the kernel code text to read-only prematurely, and other boot code that expects this code to be read-write will fail. The solution is to add a variable that is set when the kernel code text is expected to be converted to read-only, and make the ftrace "before" and "after" calls do nothing if that variable is not yet set. This is similar to the x86 solution from commit 162396309745 ("ftrace, x86: make kernel text writable only for conversions"). Link: http://lkml.kernel.org/r/[email protected] Reported-by: Stefan Agner <[email protected]> Tested-by: Stefan Agner <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]> Signed-off-by: Russell King <[email protected]>
2018-07-11bpf: btf: Fix bitfield extraction for big endianOkash Khawaja1-17/+13
When extracting bitfield from a number, btf_int_bits_seq_show() builds a mask and accesses least significant byte of the number in a way specific to little-endian. This patch fixes that by checking endianness of the machine and then shifting left and right the unneeded bits. Thanks to Martin Lau for the help in navigating potential pitfalls when dealing with endianess and for the final solution. Fixes: b00b8daec828 ("bpf: btf: Add pretty print capability for data with BTF type info") Signed-off-by: Okash Khawaja <[email protected]> Acked-by: Martin KaFai Lau <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2018-07-11bpf: fix availability probing for seg6 helpersMathieu Xhonneux1-15/+8
bpf_lwt_seg6_* helpers require CONFIG_IPV6_SEG6_BPF, and currently return -EOPNOTSUPP to indicate unavailability. This patch forces the BPF verifier to reject programs using these helpers when !CONFIG_IPV6_SEG6_BPF, allowing users to more easily probe if they are available or not. Signed-off-by: Mathieu Xhonneux <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2018-07-11RDMA/mlx5: Fix memory leak in mlx5_ib_create_srq() error pathKamal Heib1-6/+12
Fix memory leak in the error path of mlx5_ib_create_srq() by making sure to free the allocated srq. Fixes: c2b37f76485f ("IB/mlx5: Fix integer overflows in mlx5_ib_create_srq") Signed-off-by: Kamal Heib <[email protected]> Acked-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2018-07-11Merge tag 'trace-v4.18-rc3-2' of ↵Linus Torvalds1-1/+5
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull kprobe fix from Steven Rostedt: "This fixes a memory leak in the kprobe code" * tag 'trace-v4.18-rc3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing/kprobe: Release kprobe print_fmt properly
2018-07-11tracing/kprobe: Release kprobe print_fmt properlyJiri Olsa1-1/+5
We don't release tk->tp.call.print_fmt when destroying local uprobe. Also there's missing print_fmt kfree in create_local_trace_kprobe error path. Link: http://lkml.kernel.org/r/[email protected] Cc: [email protected] Fixes: e12f03d7031a ("perf/core: Implement the 'perf_kprobe' PMU") Acked-by: Song Liu <[email protected]> Acked-by: Masami Hiramatsu <[email protected]> Signed-off-by: Jiri Olsa <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2018-07-11Merge branch 'for-4.18-fixes' of ↵Linus Torvalds10-47/+122
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fixes from Tejun Heo: - Jens's patches to expand the usable command depth from 31 to 32 broke sata_fsl due to a subtle command iteration bug. Fixed by introducing explicit iteration helpers and using the correct variant. - On some laptops, enabling LPM by default reportedly led to occasional hard hangs. Blacklist the affected cases. - Other misc fixes / changes. * 'for-4.18-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ata: Remove depends on HAS_DMA in case of platform dependency ata: Fix ZBC_OUT all bit handling ata: Fix ZBC_OUT command block check ahci: Add Intel Ice Lake LP PCI ID ahci: Disable LPM on Lenovo 50 series laptops with a too old BIOS sata_nv: remove redundant pointers sdev0 and sdev1 sata_fsl: remove dead code in tag retrieval sata_fsl: convert to command iterator libata: convert eh to command iterators libata: add command iterator helpers ata: ahci_mvebu: ahci_mvebu_stop_engine() can be static libahci: Fix possible Spectre-v1 pmp indexing in ahci_led_store()
2018-07-11sample: vfio-mdev: avoid deadlock in mdev_access()Alexey Khoroshilov1-1/+3
mdev_access() calls mbochs_get_page() with mdev_state->ops_lock held, while mbochs_get_page() locks the mutex by itself. It leads to unavoidable deadlock. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <[email protected]> Signed-off-by: Alex Williamson <[email protected]>
2018-07-11ARC: mm: allow mprotect to make stack mappings executableVineet Gupta1-1/+1
mprotect(EXEC) was failing for stack mappings as default vm flags was missing MAYEXEC. This was triggered by glibc test suite nptl/tst-execstack testcase What is surprising is that despite running LTP for years on, we didn't catch this issue as it lacks a directed test case. gcc dejagnu tests with nested functions also requiring exec stack work fine though because they rely on the GNU_STACK segment spit out by compiler and handled in kernel elf loader. This glibc case is different as the stack is non exec to begin with and a dlopen of shared lib with GNU_STACK segment triggers the exec stack proceedings using a mprotect(PROT_EXEC) which was broken. CC: [email protected] Signed-off-by: Vineet Gupta <[email protected]>
2018-07-11nfit: fix unchecked dereference in acpi_nfit_ctlDave Jiang1-2/+4
Incremental patch to fix the unchecked dereference in acpi_nfit_ctl. Reported by Dan Carpenter: "acpi/nfit: fix cmd_rc for acpi_nfit_ctl to always return a value" from Jun 28, 2018, leads to the following Smatch complaint: drivers/acpi/nfit/core.c:578 acpi_nfit_ctl() warn: variable dereferenced before check 'cmd_rc' (see line 411) drivers/acpi/nfit/core.c 410 411 *cmd_rc = -EINVAL; ^^^^^^^^^^^^^^^^^^ Patch adds unchecked dereference. Fixes: c1985cefd844 ("acpi/nfit: fix cmd_rc for acpi_nfit_ctl to always return a value") Signed-off-by: Dave Jiang <[email protected]>
2018-07-11Merge tag 'char-misc-4.18-rc5' of ↵Linus Torvalds9-66/+126
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fixes from Greg KH: "Here are a few char/misc driver fixes for 4.18-rc5. The "largest" stuff here is fixes for the UIO changes in 4.18-rc1 that caused breakages for some people. Thanks to Xiubo Li for fixing them quickly. Other than that, minor fixes for thunderbolt, vmw_balloon, nvmem, mei, ibmasm, and mei drivers. There's also a MAINTAINERS update where Rafael is offering to help out with reviewing driver core patches. All of these have been in linux-next with no reported issues" * tag 'char-misc-4.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: nvmem: Don't let a NULL cell_id for nvmem_cell_get() crash us thunderbolt: Notify userspace when boot_acl is changed uio: fix crash after the device is unregistered uio: change to use the mutex lock instead of the spin lock uio: use request_threaded_irq instead fpga: altera-cvp: Fix an error handling path in 'altera_cvp_probe()' ibmasm: don't write out of bounds in read handler MAINTAINERS: Add myself as driver core changes reviewer mei: discard messages from not connected client during power down. vmw_balloon: fix inflation with batching
2018-07-11Merge tag 'staging-4.18-rc5' of ↵Linus Torvalds3-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging fixes from Greg KH: "Here are two tiny staging driver fixes for reported issues for 4.18-rc5. One fixes the r8822be driver to properly work on lots of new laptops, the other is for the rtl8723bs driver to fix an underflow error. Both have been in linux-next for a while with no reported issues" * tag 'staging-4.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: r8822be: Fix RTL8822be can't find any wireless AP staging: rtl8723bs: Prevent an underflow in rtw_check_beacon_data().
2018-07-11Merge tag 'usb-4.18-rc5' of ↵Linus Torvalds12-27/+38
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a number of small USB fixes for 4.18-rc5. Nothing major here, just the normal set of new device ids, xhci fixes, and some typec fixes. The typec fix required some tiny changes in an i2c driver, which that maintainer acked to come through my tree. All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: yurex: fix out-of-bounds uaccess in read handler usb: quirks: add delay quirks for Corsair Strafe xhci: xhci-mem: off by one in xhci_stream_id_to_ring() usb/gadget: aspeed-vhub: add USB_LIBCOMPOSITE dependency docs: kernel-parameters.txt: document xhci-hcd.quirks parameter USB: serial: mos7840: fix status-register error handling USB: serial: keyspan_pda: fix modem-status error handling USB: serial: cp210x: add another USB ID for Qivicon ZigBee stick USB: serial: ch341: fix type promotion bug in ch341_control_in() i2c-cht-wc: Fix bq24190 supplier typec: tcpm: Correctly report power_supply current and voltage for non pd supply usb: xhci: dbc: Don't decrement runtime PM counter if DBC is not started
2018-07-11Merge tag 'mmc-v4.18-rc3' of ↵Linus Torvalds5-24/+28
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "MMC core: - Fixup devname in /proc/interrupts for card detect GPIO MMC host: - sdhci-esdhc-imx: Allow 1.8V speed-modes without 100/200MHz pinctrls - sunxi: Disable IRQ in low power state to prevent IRQ storm - dw_mmc: Fix card threshold control configuration - renesas_sdhi_internal_dmac: Fixup DMA error paths" * tag 'mmc-v4.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-esdhc-imx: allow 1.8V modes without 100/200MHz pinctrl states mmc: sunxi: Disable irq during pm_suspend mmc: dw_mmc: fix card threshold control configuration mmc: core: cd_label must be last entry of mmc_gpio struct mmc: renesas_sdhi_internal_dmac: Cannot clear the RX_IN_USE in abort mmc: renesas_sdhi_internal_dmac: Fix missing unmap in error patch
2018-07-11Merge tag 'acpi-4.18-rc5' of ↵Linus Torvalds1-4/+11
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Address a regression in ACPICA that ceased to clear the status of GPEs and fixed events before entering the ACPI S5 (off) system state during the 4.17 cycle which caused some systems to power up immediately after they had been turned off" * tag 'acpi-4.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPICA: Clear status of all events when entering S5
2018-07-11arm64: neon: Fix function may_use_simd() return error statusYandong Zhao1-12/+7
It does not matter if the caller of may_use_simd() migrates to another cpu after the call, but it is still important that the kernel_neon_busy percpu instance that is read matches the cpu the task is running on at the time of the read. This means that raw_cpu_read() is not sufficient. kernel_neon_busy may appear true if the caller migrates during the execution of raw_cpu_read() and the next task to be scheduled in on the initial cpu calls kernel_neon_begin(). This patch replaces raw_cpu_read() with this_cpu_read() to protect against this race. Cc: <[email protected]> Fixes: cb84d11e1625 ("arm64: neon: Remove support for nested or hardirq kernel-mode NEON") Acked-by: Ard Biesheuvel <[email protected]> Reviewed-by: Dave Martin <[email protected]> Reviewed-by: Mark Rutland <[email protected]> Signed-off-by: Yandong Zhao <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2018-07-11bsg: fix bogus EINVAL on non-data commandsTony Battersby1-2/+0
Fix a regression introduced in Linux kernel 4.17 where sending a SCSI command that does not transfer data (such as TEST UNIT READY) via /dev/bsg/* results in EINVAL. Fixes: 17cb960f29c2 ("bsg: split handling of SCSI CDBs vs transport requeues") Cc: <[email protected]> # 4.17+ Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Tony Battersby <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2018-07-11perf tools: Use python-config --includes rather than --cflagsJeremy Cline1-2/+1
Builds started failing in Fedora on Python 3.7 with: `.gnu.debuglto_.debug_macro' referenced in section `.gnu.debuglto_.debug_macro' of util/scripting-engines/trace-event-python.o: defined in discarded section In Fedora, Python 3.7 added -flto to the list of --cflags and since it was only applied to util/scripting-engines/trace-event-python.c and scripts/python/Perf-Trace-Util/Context.c, linking failed. It's not the first time the addition of flags has broken builds: commit c6707fdef7e2 ("perf tools: Fix up build in hardnened environments") appears to have fixed a similar problem. "python-config --includes" provides the proper -I flags and doesn't introduce additional CFLAGS. Signed-off-by: Jeremy Cline <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-07-11perf script python: Fix dict reference countingJanne Huttunen1-6/+2
The dictionaries are attached to the parameter tuple that steals the references and takes care of releasing them when appropriate. The code should not decrement the reference counts explicitly. E.g. if libpython has been built with reference debugging enabled, the superfluous DECREFs will trigger this error when running perf script: Fatal Python error: Objects/tupleobject.c:238 object at 0x7f10f2041b40 has negative ref count -1 Aborted (core dumped) If the reference debugging is not enabled, the superfluous DECREFs might cause the dict objects to be silently released while they are still in use. This may trigger various other assertions or just cause perf crashes and/or weird and unexpected data changes in the stored Python objects. Signed-off-by: Janne Huttunen <[email protected]> Acked-by: Jiri Olsa <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jaroslav Skarvada <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.