| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
eversion_t is version+epoch in userspace and is encoded in that order.
ceph_eversion is defined as epoch+version in rados.h, yet we memcpy it
in __send_request(). Reoder ceph_eversion fields.
Signed-off-by: Ilya Dryomov <[email protected]>
|
|
Given
struct foo {
u64 id;
struct rb_node bar_node;
};
generate insert_bar(), erase_bar() and lookup_bar() functions with
DEFINE_RB_FUNCS(bar, struct foo, id, bar_node)
The key is assumed to be an integer (u64, int, etc), compared with
< and >. nodefld has to be initialized with RB_CLEAR_NODE().
Start using it for MDS, MON and OSD requests and OSD sessions.
Signed-off-by: Ilya Dryomov <[email protected]>
|
|
They are called only once, from ceph_osdc_stop() and
handle_osds_timeout() respectively.
Signed-off-by: Ilya Dryomov <[email protected]>
|
|
Either unused or useless:
osdmap->mkfs_epoch
osd->o_marked_for_keepalive
monc->num_generic_requests
osdc->map_waiters
osdc->last_requested_map
osdc->timeout_tid
osd_req_op_cls_response_data()
osdmap_apply_incremental() @msgr arg
Signed-off-by: Ilya Dryomov <[email protected]>
|
|
Switch to ceph_object_id and use ceph_oid_aprintf() instead of a bare
const char *. This reduces noise in rbd_dev_header_name().
Signed-off-by: Ilya Dryomov <[email protected]>
|
|
Currently ceph_object_id can hold object names of up to 100
(CEPH_MAX_OID_NAME_LEN) characters. This is enough for all use cases,
expect one - long rbd image names:
- a format 1 header is named "<imgname>.rbd"
- an object that points to a format 2 header is named "rbd_id.<imgname>"
We operate on these potentially long-named objects during rbd map, and,
for format 1 images, during header refresh. (A format 2 header name is
a small system-generated string.)
Lift this 100 character limit by making ceph_object_id be able to point
to an externally-allocated string. Apart from being able to work with
almost arbitrarily-long named objects, this allows us to reduce the
size of ceph_object_id from >100 bytes to 64 bytes.
Signed-off-by: Ilya Dryomov <[email protected]>
|
|
For a message pool message, preallocate a page, just like we do for
osd_op. For a normal message, take ceph_object_id into account and
don't bother subtracting CEPH_OSD_SLAB_OPS ceph_osd_ops.
Signed-off-by: Ilya Dryomov <[email protected]>
|
|
The size of ->r_request and ->r_reply messages depends on the size of
the object name (ceph_object_id), while the size of ceph_osd_request is
fixed. Move message allocation into a separate function that would
have to be called after ceph_object_id and ceph_object_locator (which
is also going to become variable in size with RADOS namespaces) have
been filled in:
req = ceph_osdc_alloc_request(...);
<fill in req->r_base_oid>
<fill in req->r_base_oloc>
ceph_osdc_alloc_messages(req);
Signed-off-by: Ilya Dryomov <[email protected]>
|
|
ceph_osdc_build_request() is going away. Grab snapc and initialize
->r_snapid in ceph_osdc_alloc_request().
Signed-off-by: Ilya Dryomov <[email protected]>
|
|
Signed-off-by: Ilya Dryomov <[email protected]>
|
|
By the time we get to checking for_each_obj_request_safe(img_request)
terminating condition, all obj_requests may be complete and img_request
ref, that rbd_img_request_submit() takes away from its caller, may be
put. Moving the next_obj_request cursor is then a use-after-free on
img_request.
It's totally benign, as the value that's read is never used, but
I think it's still worth fixing.
Cc: Alex Elder <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These are two stable-candidate fixes (PM core, cpuidle) and a bunch of
cpufreq cleanups.
Specifics:
- Stable-candidate cpuidle fix to make it check the right variable
when deciding whether or not to enable interrupts on the local CPU
so as to avoid enabling iterrupts too early in some cases if the
system has both coupled and per-core idle states (Daniel Lezcano).
- Stable-candidate PM core fix to make it handle failures at the
"late suspend" stage of device suspend consistently for all devices
regardless of whether or not async suspend/resume is enabled for
them (Rafael Wysocki).
- Cleanups in the cpufreq core, the schedutil governor and the
intel_pstate driver (Rafael Wysocki, Pankaj Gupta, Viresh Kumar)"
* tag 'pm-4.7-rc1-more' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / sleep: Handle failures in device_suspend_late() consistently
cpufreq: schedutil: Improve prints messages with pr_fmt
cpuidle: Fix cpuidle_state_is_coupled() argument in cpuidle_enter()
cpufreq: simplified goto out in cpufreq_register_driver()
cpufreq: governor: CPUFREQ_GOV_STOP never fails
cpufreq: governor: CPUFREQ_GOV_POLICY_EXIT never fails
intel_pstate: Simplify conditional in intel_pstate_set_policy()
|
|
the only case when we should skip the iterate_and_advance() guts
is when nothing's left in the iterator, _not_ just when requested
amount is 0. Said guts will do nothing in the latter case anyway;
the problem we tried to deal with in the aforementioned commit is
that when there's nothing left *and* the amount requested is 0,
we might end up deferencing one iovec too many; the value we fetch
from there is discarded in that case, but theoretically it might
oops if the iovec array ends exactly at the end of page with the
next page not mapped.
Bailing out on zero size requested had an unexpected side effect -
zero-length segment in the beginning of iovec array ended up
throwing do_loop_readv_writev() into infinite spin; we do not
advance past the empty segment at all. Reproducer is trivial:
echo '#include <sys/uio.h>' >a.c
echo 'main() {char c; struct iovec v[] = {{&c,0},{&c,1}}; readv(0,v,2);}' >>a.c
cc a.c && ./a.out </proc/uptime
which should end up with the process not hanging. Probably ought to
go into LTP or xfstests...
Signed-off-by: Al Viro <[email protected]>
|
|
Signed-off-by: Al Viro <[email protected]>
|
|
Commit 98e9cb57 improved the xattr name checks in xattr_resolve_name but
didn't update the NULL attribute name check appropriately, so NULL
attribute names lead to NULL pointer dereferences. Turn that into
-EINVAL results instead.
Signed-off-by: Andreas Gruenbacher <[email protected]>
fs/xattr.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
Signed-off-by: Al Viro <[email protected]>
|
|
|
|
|
|
|
|
Signed-off-by: Nicholas D Steeves <[email protected]>
Signed-off-by: David Sterba <[email protected]>
|
|
We usually call btrfs_put_bbio() when btrfs_map_block() failed,
btrfs_put_bbio() works right whether bbio is a valid value, or NULL.
But there is a exception, in some case, btrfs_map_block() will return
fail without touching *bbio(keeping its original value), and if bbio
was not initialized yet, invalid memory accessing will happened.
Above case is in scrub_missing_raid56_pages(), and similar case in
scrub_raid56_parity().
Signed-off-by: Zhao Lei <[email protected]>
Signed-off-by: David Sterba <[email protected]>
|
|
* acpi-battery:
ACPI / battery: Correctly serialise with the pending async probe
|
|
* pm-cpufreq:
cpufreq: schedutil: Improve prints messages with pr_fmt
cpufreq: simplified goto out in cpufreq_register_driver()
cpufreq: governor: CPUFREQ_GOV_STOP never fails
cpufreq: governor: CPUFREQ_GOV_POLICY_EXIT never fails
intel_pstate: Simplify conditional in intel_pstate_set_policy()
* pm-cpuidle:
cpuidle: Fix cpuidle_state_is_coupled() argument in cpuidle_enter()
* pm-core:
PM / sleep: Handle failures in device_suspend_late() consistently
|
|
In IB networks, and specifically in IPoIB/rdmacm traffic, the device
address of an IPoIB interface is used as a means to exchange information
between nodes needed for communication.
Currently an IPoIB interface will always be created with a device
address based on its node GUID without a way to change that.
This change adds the ability to set the device address of an IPoIB
interface by value. We use the set mac address ndo to do that.
The flow should be broken down to two:
1) The GID value is already in the GID table,
in this case the interface will be able to set carrier up.
2) The GID value is not yet in the GID table,
in this case the interface won't try to join the multicast group
and will wait (listen on GID_CHANGE event) until the GID is inserted.
In order to track those changes, we add a new flag:
* IPOIB_FLAG_DEV_ADDR_SET.
When set, it means the dev_addr is a based on a value in the gid
table. this bit will be cleared upon a dev_addr change triggered
by the user and set after validation.
Per IB spec the port GUID can't change if the module is loaded.
port GUID is the basis for GID at index 0 which is the basis for
the default device address of a ipoib interface.
The issue is that there are devices that don't follow the spec,
they change the port GUID while HCA is powered on, so in order
not to break userspace applications. We need to check if the
user wanted to control the device address and we assume that
if he sets the device address back to be based on GID index 0,
he no longer wishs to control it.
In order to track this, we add an additional flag:
* IPOIB_FLAG_DEV_ADDR_CTRL
When setting the device address, there is no validation of the upper
twelve bytes of the device address (flags, qpn, subnet prefix) as those
bytes are not under the control of the user.
Signed-off-by: Mark Bloch <[email protected]>
Reviewed-by: Leon Romanovsky <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>
|
|
Check (via an SA query) if the SM supports the new option for SendOnly
multicast joins.
If the SM supports that option it will use the new join state to create
such multicast group.
If SendOnlyFullMember is supported, we wouldn't use faked FullMember state
join for SendOnly MCG, use the correct state if supported.
This check is performed at every invocation of mcast_restart task, to be
sure that the driver stays in sync with the current state of the SM.
Signed-off-by: Erez Shitrit <[email protected]>
Reviewed-by: Leon Romanovsky <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>
|
|
There are four types for MCG, FullMember, NonMember, SendOnlyNonMember,
and the new added type: SendOnlyFullMember.
Add support for the new SendOnlyFullMember join state.
The new type allows host to send join request as sendonly, it will cause the
group to be created but without getting packets from this multicast back to the
host.
Signed-off-by: Erez Shitrit <[email protected]>
Reviewed-by: Leon Romanovsky <[email protected]>
Reviewed-by: Christoph Lameter <[email protected]>
Reviewed-by: Ira Weiny <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>
|
|
New SA query function to return the ClassPortInfo struct from the SA.
If the SM supports FullMemberSendOnly mode for MCG's, it sets a
capability bit in the capability_mask2 field of the response.
Signed-off-by: Erez Shitrit <[email protected]>
Reviewed-by: Leon Romanovsky <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>
|
|
Change struct ib_class_port_info to conform to IB Spec 1.3
That in order to get specific capability mask from ClassPortInfo mad.
>From the IB Spec, ClassPortInfo section:
"CapabilityMask2 Bits 0-26: Additional class-specific capabilities...
RespTimeValue the rest 5 bits"
The new struct now has one field for capabilitymask2 (previously was the
reserved field) and the resp_time field.
And it fixes up qib and srpt, use of the field repurposed to be used as
capabilitymask2:
IB/qib: Change pma_get_classportinfo
IB/srpt: Adjust the use of ib_class_port_info
Signed-off-by: Erez Shitrit <[email protected]>
Reviewed-by: Leon Romanovsky <[email protected]>
Reviewed-by: Hal Rosenstock <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>
|
|
'asoc/fix/kirkwood' and 'asoc/fix/twl6040' into asoc-linus
|
|
ASoC: Updates for v4.7
The updates this time around are almost all driver code:
- Further slow progress on the topology code.
- Substantial updates and improvements for the da7219, es8328, fsl-ssi
Intel and rcar drivers.
# gpg: Signature made Mon 16 May 2016 12:08:43 BST using RSA key ID 5D5487D0
# gpg: Good signature from "Mark Brown <[email protected]>"
# gpg: aka "Mark Brown <[email protected]>"
# gpg: aka "Mark Brown <[email protected]>"
# gpg: aka "Mark Brown <[email protected]>"
# gpg: aka "Mark Brown <[email protected]>"
# gpg: aka "Mark Brown <[email protected]>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 3F25 68AA C269 98F9 E813 A1C5 C3F4 36CA 30F5 D8EB
# Subkey fingerprint: ADE6 68AA 6757 18B5 9FE2 9FEA 24D6 8B72 5D54 87D0
|
|
btrfs's fiemap is supposed to return 0 on success and return < 0 on
error. however, ret becomes 1 after looking up the last file extent:
btrfs_lookup_file_extent ->
btrfs_search_slot(..., ins_len=0, cow=0)
and if the offset is beyond EOF, we'll get 'path' pointed to the place
of potentail insertion, and ret == 1.
This may confuse applications using ioctl(FIEL_IOC_FIEMAP).
Signed-off-by: Liu Bo <[email protected]>
Signed-off-by: David Sterba <[email protected]>
|
|
While reading sys_chunk_array in superblock, btrfs creates a temporary
extent buffer. Since we don't use it after finishing reading
sys_chunk_array, we don't need to keep it in memory.
Signed-off-by: Liu Bo <[email protected]>
Signed-off-by: David Sterba <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"This set of changes introduces an atomic API to the PWM subsystem.
This is influenced by the DRM atomic API that was introduced a while
back, though it is obviously a lot simpler. The fundamental idea
remains the same, though: drivers provide a single callback to
implement the atomic configuration of a PWM channel.
As a side-effect the PWM subsystem gains the ability for initial state
retrieval, so that the logical state mirrors that of the hardware.
Many use-cases don't care about this, but for others it is essential.
These new features require changes in all users, which these patches
take care of. The core is transitioned to use the atomic callback if
available and provides a fallback mechanism for other drivers.
Changes to transition users and drivers to the atomic API are
postponed to v4.8"
* tag 'pwm/for-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (30 commits)
pwm: Add information about polarity, duty cycle and period to debugfs
pwm: Switch to the atomic API
pwm: Update documentation
pwm: Add core infrastructure to allow atomic updates
pwm: Add hardware readout infrastructure
pwm: Move the enabled/disabled info into pwm_state
pwm: Introduce the pwm_state concept
pwm: Keep PWM state in sync with hardware state
ARM: Explicitly apply PWM config extracted from pwm_args
drm: i915: Explicitly apply PWM config extracted from pwm_args
input: misc: pwm-beeper: Explicitly apply PWM config extracted from pwm_args
input: misc: max8997: Explicitly apply PWM config extracted from pwm_args
backlight: lm3630a: explicitly apply PWM config extracted from pwm_args
backlight: lp855x: Explicitly apply PWM config extracted from pwm_args
backlight: lp8788: Explicitly apply PWM config extracted from pwm_args
backlight: pwm_bl: Use pwm_get_args() where appropriate
fbdev: ssd1307fb: Use pwm_get_args() where appropriate
regulator: pwm: Use pwm_get_args() where appropriate
leds: pwm: Use pwm_get_args() where appropriate
input: misc: max77693: Use pwm_get_args() where appropriate
...
|
|
The mds can inform the client not to use the IOMODE_RW layout
segment for doing READs. I.e., it is basically a
IOMODE_WRITE layout segment.
It would do this to not interfere with the WRITEs.
Signed-off-by: Tom Haynes <[email protected]>
Signed-off-by: Anna Schumaker <[email protected]>
|
|
Pull watchdog updates from Wim Van Sebroeck:
- add support for Fintek F81865 Super-IO chip
- add support for watchdogs (RWDT and SWDT) found on RCar Gen3 based
SoCs from Renesas
- octeon: Handle the FROZEN hot plug notifier actions
- f71808e_wdt fixes and cleanups
- some small improvements in code and documentation
* git://www.linux-watchdog.org/linux-watchdog:
MAINTAINERS: Add file patterns for watchdog device tree bindings
Documentation: Add ebc-c384_wdt watchdog-parameters.txt entry
watchdog: shwdt: Use setup_timer()
watchdog: cpwd: Use setup_timer()
arm64: defconfig: enable Renesas Watchdog Timer
watchdog: renesas-wdt: add driver
watchdog: remove error message when unable to allocate watchdog device
watchdog: f71808e_wdt: Fix WDTMOUT_STS register read
watchdog: f71808e_wdt: Fix typo
watchdog: f71808e_wdt: Add F81865 support
watchdog: sp5100_tco: properly check for new register layouts
watchdog: core: Fix circular locking dependency
watchdog: core: fix trivial typo in a comment
watchdog: hpwdt: Adjust documentation to match latest kernel module parameters.
watchdog: imx2_wdt: add external reset support via dt prop
watchdog: octeon: Handle the FROZEN hot plug notifier actions.
watchdog: qcom: Report reboot reason
|
|
Since the patch "NFS: Allow multiple commit requests in flight per file"
we can run multiple simultaneous commits on the same inode. This
introduced a race over collecting pages to commit that made it possible
to call nfs_init_commit() with an empty list - which causes crashes like
the one below.
The fix is to catch this race and avoid calling nfs_init_commit and
initiate_commit when there is no work to do.
Here is the crash:
[600522.076832] BUG: unable to handle kernel NULL pointer dereference at 0000000000000040
[600522.078475] IP: [<ffffffffa0479e72>] nfs_init_commit+0x22/0x130 [nfs]
[600522.078745] PGD 4272b1067 PUD 4272cb067 PMD 0
[600522.078972] Oops: 0000 [#1] SMP
[600522.079204] Modules linked in: nfsv3 nfs_layout_flexfiles rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache dcdbas ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw vmw_vsock_vmci_transport vsock bonding ipmi_devintf ipmi_msghandler coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ppdev vmw_balloon parport_pc parport acpi_cpufreq vmw_vmci i2c_piix4 shpchp nfsd auth_rpcgss nfs_acl lockd grace sunrpc xfs libcrc32c vmwgfx drm_kms_helper ttm drm crc32c_intel serio_raw vmxnet3
[600522.081380] vmw_pvscsi ata_generic pata_acpi
[600522.081809] CPU: 3 PID: 15667 Comm: /usr/bin/python Not tainted 4.1.9-100.pd.88.el7.x86_64 #1
[600522.082281] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 09/30/2014
[600522.082814] task: ffff8800bbbfa780 ti: ffff88042ae84000 task.ti: ffff88042ae84000
[600522.083378] RIP: 0010:[<ffffffffa0479e72>] [<ffffffffa0479e72>] nfs_init_commit+0x22/0x130 [nfs]
[600522.083973] RSP: 0018:ffff88042ae87438 EFLAGS: 00010246
[600522.084571] RAX: 0000000000000000 RBX: ffff880003485e40 RCX: ffff88042ae87588
[600522.085188] RDX: 0000000000000000 RSI: ffff88042ae874b0 RDI: ffff880003485e40
[600522.085756] RBP: ffff88042ae87448 R08: ffff880003486010 R09: ffff88042ae874b0
[600522.086332] R10: 0000000000000000 R11: 0000000000000005 R12: ffff88042ae872d0
[600522.086905] R13: ffff88042ae874b0 R14: ffff880003485e40 R15: ffff88042704c840
[600522.087484] FS: 00007f4728ff2740(0000) GS:ffff88043fd80000(0000) knlGS:0000000000000000
[600522.088070] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[600522.088663] CR2: 0000000000000040 CR3: 000000042b6aa000 CR4: 00000000001406e0
[600522.089327] Stack:
[600522.089926] 0000000000000001 ffff88042ae87588 ffff88042ae874f8 ffffffffa04f09fa
[600522.090549] 0000000000017840 0000000000017840 ffff88042ae87588 ffff8803258d9930
[600522.091169] ffff88042ae87578 ffffffffa0563d80 0000000000000000 ffff88042704c840
[600522.091789] Call Trace:
[600522.092420] [<ffffffffa04f09fa>] pnfs_generic_commit_pagelist+0x1da/0x320 [nfsv4]
[600522.093052] [<ffffffffa0563d80>] ? ff_layout_commit_prepare_v3+0x30/0x30 [nfs_layout_flexfiles]
[600522.093696] [<ffffffffa0562645>] ff_layout_commit_pagelist+0x15/0x20 [nfs_layout_flexfiles]
[600522.094359] [<ffffffffa047bc78>] nfs_generic_commit_list+0xe8/0x120 [nfs]
[600522.095032] [<ffffffffa047bd6a>] nfs_commit_inode+0xba/0x110 [nfs]
[600522.095719] [<ffffffffa046ac54>] nfs_release_page+0x44/0xd0 [nfs]
[600522.096410] [<ffffffff811a8122>] try_to_release_page+0x32/0x50
[600522.097109] [<ffffffff811bd4f1>] shrink_page_list+0x961/0xb30
[600522.097812] [<ffffffff811bdced>] shrink_inactive_list+0x1cd/0x550
[600522.098530] [<ffffffff811bea65>] shrink_lruvec+0x635/0x840
[600522.099250] [<ffffffff811bed60>] shrink_zone+0xf0/0x2f0
[600522.099974] [<ffffffff811bf312>] do_try_to_free_pages+0x192/0x470
[600522.100709] [<ffffffff811bf6ca>] try_to_free_pages+0xda/0x170
[600522.101464] [<ffffffff811b2198>] __alloc_pages_nodemask+0x588/0x970
[600522.102235] [<ffffffff811fbbd5>] alloc_pages_vma+0xb5/0x230
[600522.103000] [<ffffffff813a1589>] ? cpumask_any_but+0x39/0x50
[600522.103774] [<ffffffff811d6115>] wp_page_copy.isra.55+0x95/0x490
[600522.104558] [<ffffffff810e3438>] ? __wake_up+0x48/0x60
[600522.105357] [<ffffffff811d7d3b>] do_wp_page+0xab/0x4f0
[600522.106137] [<ffffffff810a1bbb>] ? release_task+0x36b/0x470
[600522.106902] [<ffffffff8126dbd7>] ? eventfd_ctx_read+0x67/0x1c0
[600522.107659] [<ffffffff811da2a8>] handle_mm_fault+0xc78/0x1900
[600522.108431] [<ffffffff81067ef1>] __do_page_fault+0x181/0x420
[600522.109173] [<ffffffff811446a6>] ? __audit_syscall_exit+0x1e6/0x280
[600522.109893] [<ffffffff810681c0>] do_page_fault+0x30/0x80
[600522.110594] [<ffffffff81024f36>] ? syscall_trace_leave+0xc6/0x120
[600522.111288] [<ffffffff81790a58>] page_fault+0x28/0x30
[600522.111947] Code: 5d c3 0f 1f 80 00 00 00 00 0f 1f 44 00 00 55 4c 8d 87 d0 01 00 00 48 89 e5 53 48 89 fb 48 83 ec 08 4c 8b 0e 49 8b 41 18 4c 39 ce <48> 8b 40 40 4c 8b 50 30 74 24 48 8b 87 d0 01 00 00 48 8b 7e 08
[600522.113343] RIP [<ffffffffa0479e72>] nfs_init_commit+0x22/0x130 [nfs]
[600522.114003] RSP <ffff88042ae87438>
[600522.114636] CR2: 0000000000000040
Fixes: af7cf057 (NFS: Allow multiple commit requests in flight per file)
CC: [email protected]
Signed-off-by: Weston Andros Adamson <[email protected]>
Signed-off-by: Anna Schumaker <[email protected]>
|
|
Pull VFIO updates from Alex Williamson:
- Hide INTx on certain known broken devices (Alex Williamson)
- Additional backdoor reset detection (Alex Williamson)
- Remove unused iommudata reference (Alexey Kardashevskiy)
- Use cfg_size to avoid probing extended config space (Alexey
Kardashevskiy)
* tag 'vfio-v4.7-rc1' of git://github.com/awilliam/linux-vfio:
vfio_pci: Test for extended capabilities if config space > 256 bytes
vfio_iommu_spapr_tce: Remove unneeded iommu_group_get_iommudata
vfio/pci: Add test for BAR restore
vfio/pci: Hide broken INTx support from user
|
|
git://people.freedesktop.org/~airlied/linux
Pull header warning fix from Dave Airlie:
"Here is the C++ guards warning fix from Arnd"
[ Background: there are 'extern "C" { }' guards in include/uapi for the
GPU headers.
They should arguably be wrapped somehow, but as it is they caused
checkpatch to warn because it would trigger on the 'extern' and think
it's exporting a function or variable from the kernel to user space.
This just fixes checkpatch. Whether we wrap the C++ guards some way
in the future will be an independent issue. ]
* tag 'drm-4.7-rc1-headers-fix' of git://people.freedesktop.org/~airlied/linux:
headers_check: don't warn about c++ guards
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
- Add native high-resolution timing code for sched_clock() and other
timing functions based on the processor internal cr16 cycle counters
- Add syscall tracepoint support
- Add regset support
- Speed up get_user() and put_user() functions
- Updated futex.h to match generic implementation (John David Anglin)
- A few smaller ftrace build fixes
- Fixed thuge-gen kernel self test to utilize architectured MAP_HUGETLB
value
- Added parisc architecture to seccomp_bpf kernel self test
- Various typo fixes (Andrea Gelmini)
* 'parisc-4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Whitespace cleanups in unistd.h
parisc: Use long jump to reach ftrace_return_to_handler()
parisc: Fix typo in fpudispatch.c
parisc: Fix typos in eisa_eeprom.h
parisc: Fix typo in ldcw.h
parisc: Fix typo in pdc.h
parisc: Update futex.h to match generic implementation
parisc: Merge ftrace C-helper and assembler functions into .text.hot section
selftests/thuge-gen: Use platform specific MAP_HUGETLB value
parisc: Add native high-resolution sched_clock() implementation
parisc: Add ARCH_TRACEHOOK and regset support
parisc: Add 64bit get_user() and put_user() for 32bit kernel
parisc: Simplify and speed up get_user() and put_user()
parisc: Add syscall tracepoint support
|
|
nfs_create_request() doesn't return NULL, it returns error pointers.
Fixes: 67911c8f18b5 ('NFS: Add nfs_commit_file()')
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Anna Schumaker <[email protected]>
|
|
A lot of the code works with the perf events about which only sparse
documentation was available until 2012. Having that information now,
we can clarify what is done in the code.
Signed-off-by: Janosch Frank <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Having stats for single VMs can help to determine the problem of a VM
without the need of running other tools like perf.
The tracepoints already allowed pid level monitoring, but kvm_stat
didn't have support for it till now. Support for the newly implemented
debugfs vm monitoring was also implemented.
Signed-off-by: Janosch Frank <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
This patch adds a kvm debugfs subdirectory for each VM, which is named
after its pid and file descriptor. The directories contain the same
kind of files that are already in the kvm debugfs directory, but the
data exported through them is now VM specific.
This makes the debugfs kvm data a convenient alternative to the
tracepoints which already have per VM data. The debugfs data is easy
to read and low overhead.
CC: Dan Carpenter <[email protected]> [includes fixes by Dan Carpenter]
Signed-off-by: Janosch Frank <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
The new kvm subdirectory in tools contains kvm related scripts.
Signed-off-by: Janosch Frank <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
kvm_stat script is failing to execute on powerpc :
# ./kvm_stat
Traceback (most recent call last):
File "./kvm_stat", line 825, in <module>
main()
File "./kvm_stat", line 813, in main
providers = get_providers(options)
File "./kvm_stat", line 778, in get_providers
providers.append(TracepointProvider())
File "./kvm_stat", line 416, in __init__
self.filters = get_filters()
File "./kvm_stat", line 315, in get_filters
if ARCH.exit_reasons:
AttributeError: 'ArchPPC' object has no attribute 'exit_reasons'
This is because, its trying to access a non-defined attribute.
Also, the IOCTL number of RESET is incorrect for powerpc. The correct
number has been added.
Signed-off-by: Hemant Kumar <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Converted from the Texinfo source in QEMU to asciidoc. The a2x
incantation was provided by Janosch Frank.
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
This tool displays kvm vm exit statistics to ease vm monitoring. It
takes its data from the kvm debugfs files or the vm tracepoints and
outputs them as a curses ui or simple text.
It was moved from qemu, as it is dependent on the kernel whereas qemu
works with a large number of kernel versions, some of which may break
the script.
Signed-off-by: Janosch Frank <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
The function to update APICv on/off state (in particular, to deactivate
it when enabling Hyper-V SynIC) is incomplete: it doesn't adjust
APICv-related fields among secondary processor-based VM-execution
controls. As a result, Windows 2012 guests get stuck when SynIC-based
auto-EOI interrupt intersected with e.g. an IPI in the guest.
In addition, the MSR intercept bitmap isn't updated every time "virtualize
x2APIC mode" is toggled. This path can only be triggered by a malicious
guest, because Windows didn't use x2APIC but rather their own synthetic
APIC access MSRs; however a guest running in a SynIC-enabled VM could
switch to x2APIC and thus obtain direct access to host APIC MSRs
(CVE-2016-4440).
The patch fixes those omissions.
Signed-off-by: Roman Kagan <[email protected]>
Reported-by: Steve Rutherford <[email protected]>
Reported-by: Yang Zhang <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
The DRM_AMD_ACP option doesn't have any dependencies and selects
MFD_CORE, which results in MFD_CORE=y. Since the code is only called
from DRM_AMDGPU, it should depend on it. Adding the dependency results
in MFD_CORE being selected as a module again if amdgpu is also a module.
Signed-off-by: Jeff Mahoney <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
When porting the hdmi deep color detection code from
radeon-kms to amdgpu-kms apparently some kind of
copy and paste error happened, attaching an else
branch to the wrong if statement.
The result is that hdmi deep color mode is always
disabled, regardless of gpu and display capabilities and
user wishes, as the code mistakenly thinks that the display
doesn't provide the required max_tmds_clock limit and falls
back to 8 bpc.
This patch fixes deep color support, as tested on a
R9 380 Tonga Pro + suitable display, and should be
backported to all kernels with amdgpu-kms support.
Signed-off-by: Mario Kleiner <[email protected]>
Cc: [email protected]
Cc: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Using wrong counter for walking fences. Fixes
a crash when unloading the driver.
Signed-off-by: Monk Liu <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|