aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-09-13dt-bindings: clock: gcc-sdm845: add sdm670 global clocksRichard Acayan2-13/+47
The Snapdragon 670 clocks will be added into the sdm845 gcc driver. Most of the new clocks, GDSCs, and resets already have reserved IDs but there are some resources that don't. Add the new clock from Snapdragon 670 and document the differences between the SoC parent clocks. Signed-off-by: Richard Acayan <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-09-13clk: qcom: a53-pll: convert to use parent_data rather than parent_namesDmitry Baryshkov1-1/+3
Change a53-pll driver to use clk_parent_data rather than always looking up the xo clock in the system clock list. Note, this change also switches the a53-pll from the global `xo' clock to the `xo_board', the clock that is specified as the `xo' clock in the DT file. Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-09-13clk: qcom: gcc-msm8660: use parent_hws/_data instead of parent_namesDmitry Baryshkov1-100/+164
Convert the clock driver to specify parent data rather than parent names, to actually bind using 'clock-names' specified in the DTS rather than global clock names. Use parent_hws where possible to refer parent clocks directly, skipping the lookup. Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-09-13clk: qcom: gcc-msm8660: use ARRAY_SIZE instead of specifying num_parentsDmitry Baryshkov1-41/+41
Use ARRAY_SIZE() instead of manually specifying num_parents. This makes adding/removing entries to/from parent_data easy and errorproof. Signed-off-by: Dmitry Baryshkov <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-09-13dt-bindings: clock: qcom,gcc-msm8660: separate GCC bindings for MSM8660Dmitry Baryshkov2-3/+54
Create a separate DT bindings for Global Clock Controller on MSM8660 platform. Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-09-13clk: qcom: sm6115: Select QCOM_GDSCDang Huynh1-0/+1
While working on the Fxtec Pro1X device, this error shows up with my own minimal configuration: gcc-sm6115: probe of 1400000.clock-controller failed with error -38 The clock driver depends on CONFIG_QCOM_GDSC and after enabling that, the driver probes successfully. Signed-off-by: Dang Huynh <[email protected]> Fixes: cbe63bfdc54f ("clk: qcom: Add Global Clock controller (GCC) Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-09-13clk: qcom: lpass: Add support for resets & external mclk for SC7280Taniya Das2-2/+55
The clock gating control for TX/RX/WSA core bus clocks would be required to be reset(moved from hardware control) from audio core driver. Thus add the support for the reset clocks. Update the lpass_aon_cc_main_rcg_clk_src ops to park the RCG at XO after disable as this clock signal is used by hardware to turn ON memories in LPASS. Also add the external mclk to interface external MI2S. Fixes: a9dd26639d05 ("clk: qcom: lpass: Add support for LPASS clock controller for SC7280") Signed-off-by: Taniya Das <[email protected]> Reviewed-by: Stephen Boyd <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-09-13clk: qcom: lpass: Handle the regmap overlap of lpasscc and lpass_aonTaniya Das2-44/+44
Move registration of lpass_q6ss_ahbm_clk and lpass_q6ss_ahbs_clk to lpass_aon_cc_sc7280_probe and register them only if "qcom,adsp-pil-mode" is enabled in the lpass_aon DT node. Signed-off-by: Taniya Das <[email protected]> Signed-off-by: Satya Priya <[email protected]> Reviewed-by: Stephen Boyd <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-09-13Merge branch '[email protected]' ↵Bjorn Andersson4-7/+32
into clk-for-6.1
2022-09-13dt-bindings: clock: Add support for external MCLKs for LPASS on SC7280Taniya Das1-0/+2
Support external mclk to interface external MI2S clocks for SC7280. Fixes: 4185b27b3bef ("dt-bindings: clock: Add YAML schemas for LPASS clocks on SC7280") Acked-by: Rob Herring <[email protected]> Signed-off-by: Taniya Das <[email protected]> Reviewed-by: Stephen Boyd <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-09-13dt-bindings: clock: Add resets for LPASS audio clock controller for SC7280Taniya Das2-3/+21
Add support for LPASS audio clock gating for RX/TX/SWA core bus clocks for SC7280. Update reg property min/max items in YAML schema. Fixes: 4185b27b3bef ("dt-bindings: clock: Add YAML schemas for LPASS clocks on SC7280") Acked-by: Rob Herring <[email protected]> Signed-off-by: Taniya Das <[email protected]> Reviewed-by: Stephen Boyd <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-09-13dt-bindings: clock: Add "qcom,adsp-pil-mode" propertyTaniya Das2-4/+9
When this property is set, the remoteproc is used to boot the LPASS and therefore lpass_q6ss_ahbm_clk and lpass_q6ss_ahbs_clk clocks would be used to bring LPASS out of reset and the rest of the lpass clocks would be controlled directly by the remoteproc. This is a cleanup done to handle overlap of regmap of lpasscc and lpass_aon blocks. Signed-off-by: Taniya Das <[email protected]> Signed-off-by: Satya Priya <[email protected]> Reviewed-by: Rob Herring <[email protected]> Reviewed-by: Stephen Boyd <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-08-29clk: qcom: gcc-sdm660: Use floor ops for SDCC1 clockMarijn Suijten1-1/+1
In commit 3f905469c8ce ("clk: qcom: gcc: Use floor ops for SDCC clocks") floor ops were applied to SDCC2 only, but flooring is also required on the SDCC1 apps clock which is used by the eMMC card on Sony's Nile platform, and otherwise result in the typicial "Card appears overclocked" warnings observed on many other platforms before: mmc0: Card appears overclocked; req 52000000 Hz, actual 100000000 Hz mmc0: Card appears overclocked; req 52000000 Hz, actual 100000000 Hz mmc0: Card appears overclocked; req 104000000 Hz, actual 192000000 Hz Fixes: f2a76a2955c0 ("clk: qcom: Add Global Clock controller (GCC) driver for SDM660") Signed-off-by: Marijn Suijten <[email protected]> Tested-by: Alexey Minnekhanov <[email protected]> Reviewed-by: Stephen Boyd <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-08-29dt-bindings: clock: qcom,mmcc: define clocks/clock-names for MSM8996Dmitry Baryshkov1-2/+31
Define clock/clock-names properties of the MMCC device node to be used on MSM8996 platform. Acked-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-08-29dt-bindings: clock: qcom,mmcc: fix clocks/clock-names definitionsDmitry Baryshkov1-32/+117
Rather than defining (incorrect) global clocks and clock-names lists, define them per platform using conditionals. Also, while we are at it, mark these properties as required for all platforms for which DT files contained clocks/clock-names for the MMCC nodes from the beginning (in addition to existing MSM8998 this adds MSM8994, SDM630 and SDM660). Signed-off-by: Dmitry Baryshkov <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-08-29clk: qcom: gcc-msm8916: use parent_hws/_data instead of parent_namesDmitry Baryshkov1-333/+349
Convert the clock driver to specify parent data rather than parent names, to actually bind using 'clock-names' specified in the DTS rather than global clock names. Use parent_hws where possible to refer parent clocks directly, skipping the lookup. Reviewed-by: Marijn Suijten <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-08-29clk: qcom: gcc-msm8916: move gcc_mss_q6_bimc_axi_clk downDmitry Baryshkov1-17/+17
The gcc_mss_q6_bimc_axi_clk clock depends on the bimc_ddr_clk_src clock. Move it down in the file to come after the source clock. Reviewed-by: Marijn Suijten <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-08-29clk: qcom: gcc-msm8916: move GPLL definitions upDmitry Baryshkov1-108/+108
Move GPLL definitions up, before the clock parent tables, so that we can use gpll hw clock fields in the parent_data/parent_hws tables. Reviewed-by: Marijn Suijten <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-08-29clk: qcom: gcc-msm8916: use ARRAY_SIZE instead of specifying num_parentsDmitry Baryshkov1-54/+54
Use ARRAY_SIZE() instead of manually specifying num_parents. This makes adding/removing entries to/from parent_data easy and errorproof. This conversion fixes an issue present since the first version of this driver. For the gp1_clk_src, gp2_clk_src and gp3_clk_src it was impossible to select sleep_clk as a prent of the clock, since num_parents was limited to 3 rather than 4. Switching to use num_parents automatically makes sleep_clk available for selection. Fixes: 3966fab8b6ab ("clk: qcom: Add MSM8916 Global Clock Controller support") Cc: Georgi Djakov <[email protected]> Reviewed-by: Marijn Suijten <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Dmitry Baryshkov <[email protected]> Acked-by: Georgi Djakov <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-08-29dt-bindings: clock: separate bindings for MSM8916 GCC deviceDmitry Baryshkov2-1/+61
Separate bindings for GCC on Qualcomm MSM8916 platforms. This adds new clocks/clock-names properties to be used for clock links. Reviewed-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Marijn Suijten <[email protected]> Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-08-29dt-bindings: clk: qcom,gcc-*: use qcom,gcc.yamlDmitry Baryshkov19-367/+76
Use qcom,gcc.yaml which contains a set of properties common to most Qualcomm GCC bindings. Reviewed-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Marijn Suijten <[email protected]> Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-08-18clk: gcc-sc8280xp: keep USB power-domains always-onJohan Hovold1-0/+7
The Qualcomm DWC3 driver suspend implementation appears to be incomplete for SC8280XP so keep the USB power domains always-on for now so that the controller survives a suspend cycle. Signed-off-by: Johan Hovold <[email protected]> Reviewed-by: Manivannan Sadhasivam <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-08-18clk: gcc-sc8280xp: keep PCIe power-domains always-onJohan Hovold1-5/+9
The Qualcomm PCIe driver does not yet implement suspend so to keep the PCIe power domains always-on for now to avoid crashing during resume. Signed-off-by: Johan Hovold <[email protected]> Reviewed-by: Manivannan Sadhasivam <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-08-14Linux 6.0-rc1Linus Torvalds1-4/+4
2022-08-14radix-tree: replace gfp.h inclusion with gfp_types.hYury Norov1-1/+1
Radix tree header includes gfp.h for __GFP_BITS_SHIFT only. Now we have gfp_types.h for this. Fixes powerpc allmodconfig build: In file included from include/linux/nodemask.h:97, from include/linux/mmzone.h:17, from include/linux/gfp.h:7, from include/linux/radix-tree.h:12, from include/linux/idr.h:15, from include/linux/kernfs.h:12, from include/linux/sysfs.h:16, from include/linux/kobject.h:20, from include/linux/pci.h:35, from arch/powerpc/kernel/prom_init.c:24: include/linux/random.h: In function 'add_latent_entropy': >> include/linux/random.h:25:46: error: 'latent_entropy' undeclared (first use in this function); did you mean 'add_latent_entropy'? 25 | add_device_randomness((const void *)&latent_entropy, sizeof(latent_entropy)); | ^~~~~~~~~~~~~~ | add_latent_entropy include/linux/random.h:25:46: note: each undeclared identifier is reported only once for each function it appears in Reported-by: kernel test robot <[email protected]> CC: Andy Shevchenko <[email protected]> CC: Andrew Morton <[email protected]> CC: Jason A. Donenfeld <[email protected]> Signed-off-by: Yury Norov <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2022-08-14Merge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds1-0/+3
Pull vfs lseek fix from Al Viro: "Fix proc_reg_llseek() breakage. Always had been possible if somebody left NULL ->proc_lseek, became a practical issue now" * tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: take care to handle NULL ->proc_lseek()
2022-08-14take care to handle NULL ->proc_lseek()Al Viro1-0/+3
Easily done now, just by clearing FMODE_LSEEK in ->f_mode during proc_reg_open() for such entries. Fixes: 868941b14441 "fs: remove no_llseek" Signed-off-by: Al Viro <[email protected]>
2022-08-14Merge tag 'for-linus-6.0-rc1b-tag' of ↵Linus Torvalds16-36/+116
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull more xen updates from Juergen Gross: - fix the handling of the "persistent grants" feature negotiation between Xen blkfront and Xen blkback drivers - a cleanup of xen.config and adding xen.config to Xen section in MAINTAINERS - support HVMOP_set_evtchn_upcall_vector, which is more compliant to "normal" interrupt handling than the global callback used up to now - further small cleanups * tag 'for-linus-6.0-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: MAINTAINERS: add xen config fragments to XEN HYPERVISOR sections xen: remove XEN_SCRUB_PAGES in xen.config xen/pciback: Fix comment typo xen/xenbus: fix return type in xenbus_file_read() xen-blkfront: Apply 'feature_persistent' parameter when connect xen-blkback: Apply 'feature_persistent' parameter when connect xen-blkback: fix persistent grants negotiation x86/xen: Add support for HVMOP_set_evtchn_upcall_vector
2022-08-14Merge tag 'perf-tools-fixes-for-v6.0-2022-08-13' of ↵Linus Torvalds112-4871/+93678
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tool updates from Arnaldo Carvalho de Melo: - 'perf c2c' now supports ARM64, adjust its output to cope with differences with what is in x86_64. Now go find false sharing on ARM64 (at least Neoverse) as well! - Refactor the JSON processing, making the output more compact and thus reducing the size of the resulting perf binary - Improvements for 'perf offcpu' profiling, including tracking child processes - Update Intel JSON metrics and events files for broadwellde, broadwellx, cascadelakex, haswellx, icelakex, ivytown, jaketown, knightslanding, sapphirerapids, skylakex and snowridgex - Add 'perf stat' JSON output and a 'perf test' entry for it - Ignore memfd and anonymous mmap events if jitdump present - Refactor 'perf test' shell tests allowing subdirs - Fix an error handling path in 'parse_perf_probe_command()' - Fixes for the guest Intel PT tracing patchkit in the 1st batch of this merge window - Print debuginfod queries if -v option is used, to explain delays in processing when debuginfo servers are enabled to fetch DSOs with richer symbol tables - Improve error message for 'perf record -p not_existing_pid' - Fix openssl and libbpf feature detection - Add PMU pai_crypto event description for IBM z16 on 'perf list' - Fix typos and duplicated words on comments in various places * tag 'perf-tools-fixes-for-v6.0-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (81 commits) perf test: Refactor shell tests allowing subdirs perf vendor events: Update events for snowridgex perf vendor events: Update events and metrics for skylakex perf vendor events: Update metrics for sapphirerapids perf vendor events: Update events for knightslanding perf vendor events: Update metrics for jaketown perf vendor events: Update metrics for ivytown perf vendor events: Update events and metrics for icelakex perf vendor events: Update events and metrics for haswellx perf vendor events: Update events and metrics for cascadelakex perf vendor events: Update events and metrics for broadwellx perf vendor events: Update metrics for broadwellde perf jevents: Fold strings optimization perf jevents: Compress the pmu_events_table perf metrics: Copy entire pmu_event in find metric perf pmu-events: Hide the pmu_events perf pmu-events: Don't assume pmu_event is an array perf pmu-events: Move test events/metrics to JSON perf test: Use full metric resolution perf pmu-events: Hide pmu_events_map ...
2022-08-14Merge tag 'powerpc-6.0-2' of ↵Linus Torvalds6-30/+25
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Ensure we never emit lwarx with EH=1 on 32-bit, because some 32-bit CPUs trap on it rather than ignoring it as they should. - Fix ftrace when building with clang, which was broken by some refactoring. - A couple of other minor fixes. Thanks to Christophe Leroy, Naveen N. Rao, Nick Desaulniers, Ondrej Mosnacek, Pali Rohár, Russell Currey, and Segher Boessenkool. * tag 'powerpc-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/kexec: Fix build failure from uninitialised variable powerpc/ppc-opcode: Fix PPC_RAW_TW() powerpc64/ftrace: Fix ftrace for clang builds powerpc: Make eh value more explicit when using lwarx powerpc: Don't hide eh field of lwarx behind a macro powerpc: Fix eh field when calling lwarx on PPC32
2022-08-13Merge tag 'pull-work.misc' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull /proc/mounts fix from Al Viro: "Fix for /proc/mounts escaping - escape the '#' character too" * tag 'pull-work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: vfs: escape hash as well
2022-08-13Merge tag '5.20-rc-smb3-client-fixes-part2' of ↵Linus Torvalds19-445/+528
git://git.samba.org/sfrench/cifs-2.6 Pull more cifs updates from Steve French: - two fixes for stable, one for a lock length miscalculation, and another fixes a lease break timeout bug - improvement to handle leases, allows the close timeout to be configured more safely - five restructuring/cleanup patches * tag '5.20-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: Do not access tcon->cfids->cfid directly from is_path_accessible cifs: Add constructor/destructors for tcon->cfid SMB3: fix lease break timeout when multiple deferred close handles for the same file. smb3: allow deferred close timeout to be configurable cifs: Do not use tcon->cfid directly, use the cfid we get from open_cached_dir cifs: Move cached-dir functions into a separate file cifs: Remove {cifs,nfs}_fscache_release_page() cifs: fix lock length calculation
2022-08-13afs: Enable multipage folio supportDavid Howells2-1/+3
Enable multipage folio support for the afs filesystem. Support has already been implemented in netfslib, fscache and cachefiles and in most of afs, but I've waited for Matthew Wilcox's latest folio changes. Note that it does require a change to afs_write_begin() to return the correct subpage. This is a "temporary" change as we're working on getting rid of the need for ->write_begin() and ->write_end() completely, at least as far as network filesystems are concerned - but it doesn't prevent afs from making use of the capability. Signed-off-by: David Howells <[email protected]> Acked-by: Matthew Wilcox (Oracle) <[email protected]> Tested-by: [email protected] Cc: Marc Dionne <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/lkml/[email protected]/ Signed-off-by: Linus Torvalds <[email protected]>
2022-08-13Merge tag 'timers-urgent-2022-08-13' of ↵Linus Torvalds4-4/+8
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Ingo Molnar: "Misc timer fixes: - fix a potential use-after-free bug in posix timers - correct a prototype - address a build warning" * tag 'timers-urgent-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: posix-cpu-timers: Cleanup CPU timers before freeing them during exec time: Correct the prototype of ns_to_kernel_old_timeval and ns_to_timespec64 posix-timers: Make do_clock_gettime() static
2022-08-13Merge tag 'x86-urgent-2022-08-13' of ↵Linus Torvalds2-12/+27
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Ingo Molnar: "Fix the 'IBPB mitigated RETBleed' mode of operation on AMD CPUs (not turned on by default), which also need STIBP enabled (if available) to be '100% safe' on even the shortest speculation windows" * tag 'x86-urgent-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/bugs: Enable STIBP for IBPB mitigated RETBleed
2022-08-13Merge tag 'i2c-for-5.20-part2' of ↵Linus Torvalds59-181/+370
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull more i2c updates from Wolfram Sang: - two driver fixes for issues introduced this cycle - one trivial driver improvement regarding ACPI - more DTS conversion and additions - documentation updates - subsystem-wide move from strlcpy to strscpy * tag 'i2c-for-5.20-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: docs: i2c: i2c-sysfs: fix hyperlinks docs: i2c: i2c-sysfs: improve wording docs: i2c: instantiating-devices: add syntax coloring to dts and C blocks docs: i2c: smbus-protocol: improve DataLow/DataHigh definition docs: i2c: i2c-protocol: remove unused legend items docs: i2c: i2c-protocol,smbus-protocol: remove nonsense words docs: i2c: i2c-protocol: update introductory paragraph i2c: move core from strlcpy to strscpy i2c: move drivers from strlcpy to strscpy i2c: kempld: Support ACPI I2C device declaration i2c: mediatek: add i2c compatible for MT8188 dt-bindings: i2c: update bindings for mt8188 soc i2c: microchip-corei2c: fix erroneous late ack send dt-bindings: i2c: qcom,i2c-cci: convert to dtschema i2c: qcom-geni: Fix GPI DMA buffer sync-back
2022-08-13Merge tag 'ntb-5.20' of https://github.com/jonmason/ntbLinus Torvalds14-25/+1822
Pull NTB updates from Jon Mason: "Non-Transparent Bridge updates. Fix of heap data and clang warnings, support for a new Intel NTB device, and NTB EndPoint Function (EPF) support and the various fixes for that" * tag 'ntb-5.20' of https://github.com/jonmason/ntb: MAINTAINERS: add PCI Endpoint NTB drivers to NTB files NTB: EPF: Tidy up some bounds checks NTB: EPF: Fix error code in epf_ntb_bind() PCI: endpoint: pci-epf-vntb: reduce several globals to statics PCI: endpoint: pci-epf-vntb: fix error handle in epf_ntb_mw_bar_init() PCI: endpoint: Fix Kconfig dependency NTB: EPF: set pointer addr to null using NULL rather than 0 Documentation: PCI: extend subheading underline for "lspci output" section Documentation: PCI: Use code-block block for scratchpad registers diagram Documentation: PCI: Add specification for the PCI vNTB function device PCI: endpoint: Support NTB transfer between RC and EP NTB: epf: Allow more flexibility in the memory BAR map method PCI: designware-ep: Allow pci_epc_set_bar() update inbound map address ntb: intel: add GNR support for Intel PCIe gen5 NTB NTB: ntb_tool: uninitialized heap data in tool_fn_write() ntb: idt: fix clang -Wformat warnings
2022-08-13Merge tag 'xfs-5.20-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds5-46/+193
Pull more xfs updates from Darrick Wong: "There's not a lot this time around, just the usual bug fixes and corrections for missing error returns. - Return error codes from block device flushes to userspace - Fix a deadlock between reclaim and mount time quotacheck - Fix an unnecessary ENOSPC return when doing COW on a filesystem with severe free space fragmentation - Fix a miscalculation in the transaction reservation computations for file removal operations" * tag 'xfs-5.20-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: fix inode reservation space for removing transaction xfs: Fix false ENOSPC when performing direct write on a delalloc extent in cow fork xfs: fix intermittent hang during quotacheck xfs: check return codes when flushing block devices
2022-08-13Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds21-99/+124
Pull more SCSI updates from James Bottomley: "Mostly small bug fixes and trivial updates. The major new core update is a change to the way device, target and host reference counting is done to try to make it more robust (this change has soaked for a while to try to winkle out any bugs)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: pm8001: Fix typo 'the the' in comment scsi: megaraid_sas: Remove redundant variable cmd_type scsi: FlashPoint: Remove redundant variable bm_int_st scsi: zfcp: Fix missing auto port scan and thus missing target ports scsi: core: Call blk_mq_free_tag_set() earlier scsi: core: Simplify LLD module reference counting scsi: core: Make sure that hosts outlive targets scsi: core: Make sure that targets outlive devices scsi: ufs: ufs-pci: Correct check for RESET DSM scsi: target: core: De-RCU of se_lun and se_lun acl scsi: target: core: Fix race during ACL removal scsi: ufs: core: Correct ufshcd_shutdown() flow scsi: ufs: core: Increase the maximum data buffer size scsi: lpfc: Check the return value of alloc_workqueue()
2022-08-13Merge tag 'block-6.0-2022-08-12' of git://git.kernel.dk/linux-blockLinus Torvalds6-7/+19
Pull block fixes from Jens Axboe: - NVMe pull request - print nvme connect Linux error codes properly (Amit Engel) - fix the fc_appid_store return value (Christoph Hellwig) - fix a typo in an error message (Christophe JAILLET) - add another non-unique identifier quirk (Dennis P. Kliem) - check if the queue is allocated before stopping it in nvme-tcp (Maurizio Lombardi) - restart admin queue if the caller needs to restart queue in nvme-fc (Ming Lei) - use kmemdup instead of kmalloc + memcpy in nvme-auth (Zhang Xiaoxu) - __alloc_disk_node() error handling fix (Rafael) * tag 'block-6.0-2022-08-12' of git://git.kernel.dk/linux-block: block: Do not call blk_put_queue() if gendisk allocation fails nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA XPG GAMMIX S70 nvme-tcp: check if the queue is allocated before stopping it nvme-fabrics: Fix a typo in an error message nvme-fabrics: parse nvme connect Linux error codes nvmet-auth: use kmemdup instead of kmalloc + memcpy nvme-fc: fix the fc_appid_store return value nvme-fc: restart admin queue if the caller needs to restart queue
2022-08-13Merge tag 'io_uring-6.0-2022-08-13' of git://git.kernel.dk/linux-blockLinus Torvalds26-183/+178
Pull io_uring fixes from Jens Axboe: - Regression fix for this merge window, fixing a wrong order of arguments for io_req_set_res() for passthru (Dylan) - Fix for the audit code leaking context memory (Peilin) - Ensure that provided buffers are memcg accounted (Pavel) - Correctly handle short zero-copy sends (Pavel) - Sparse warning fixes for the recvmsg multishot command (Dylan) - Error handling fix for passthru (Anuj) - Remove randomization of struct kiocb fields, to avoid it growing in size if re-arranged in such a fashion that it grows more holes or padding (Keith, Linus) - Small series improving type safety of the sqe fields (Stefan) * tag 'io_uring-6.0-2022-08-13' of git://git.kernel.dk/linux-block: io_uring: add missing BUILD_BUG_ON() checks for new io_uring_sqe fields io_uring: make io_kiocb_to_cmd() typesafe fs: don't randomize struct kiocb fields io_uring: consistently make use of io_notif_to_data() io_uring: fix error handling for io_uring_cmd io_uring: fix io_recvmsg_prep_multishot sparse warnings io_uring/net: send retry for zerocopy io_uring: mem-account pbuf buckets audit, io_uring, io-wq: Fix memory leak in io_sq_thread() and io_wqe_worker() io_uring: pass correct parameters to io_req_set_res
2022-08-13perf test: Refactor shell tests allowing subdirsCarsten Haitzler4-134/+238
This is a prelude to adding more tests to shell tests and in order to support putting those tests into subdirectories, I need to change the test code that scans/finds and runs them. To support subdirs I have to recurse so it's time to refactor the code to allow this and centralize the shell script finding into one location and only one single scan that builds a list of all the found tests in memory instead of it being duplicated in 3 places. This code also optimizes things like knowing the max width of desciption strings (as we can do that while we scan instead of a whole new pass of opening files). It also more cleanly filters scripts to see only *.sh files thus skipping random other files in directories like *~ backup files, other random junk/data files that may appear and the scripts must be executable to make the cut (this ensures the script lib dir is not seen as scripts to run). This avoids perf test running previous older versions of test scripts that are editor backup files as well as skipping perf.data files that may appear and so on. Reviewed-by: Leo Yan <[email protected]> Signed-off-by: Carsten Haitzler <[email protected]> Tested-by: Leo Yan <[email protected]> Cc: Mathieu Poirier <[email protected]> Cc: Mike Leach <[email protected]> Cc: Suzuki Poulouse <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-08-13perf vendor events: Update events for snowridgexZhengjun Xing1-84/+27
Update the events to v1.20, update events for snowridgex by the latest event converter tools. Use script at: https://github.com/intel/event-converter-for-linux-perf/blob/master/download_and_gen.py to download and generate the latest events and metrics. Manually copy the snowridgex files into perf. Signed-off-by: Xing Zhengjun <[email protected]> Tested-by: Ian Rogers <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-08-13perf vendor events: Update events and metrics for skylakexZhengjun Xing4-1157/+24918
Update the events to v1.28, the metrics are based on TMA 4.4 full, update events and metrics for skylakex by the latest event converter tools. Use script at: https://github.com/intel/event-converter-for-linux-perf/blob/master/download_and_gen.py to download and generate the latest events and metrics. Manually copy the skylakex files into perf. Signed-off-by: Xing Zhengjun <[email protected]> Tested-by: Ian Rogers <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-08-13perf vendor events: Update metrics for sapphirerapidsZhengjun Xing1-0/+6
The metrics are based on TMA 4.4 full, add new metrics “UNCORE_FREQ” for sapphirerapids. Use script at: https://github.com/intel/event-converter-for-linux-perf/blob/master/download_and_gen.py to download and generate the latest events and metrics. Manually copy the sapphirerapids files into perf. Signed-off-by: Xing Zhengjun <[email protected]> Tested-by: Ian Rogers <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-08-13perf vendor events: Update events for knightslandingZhengjun Xing1-0/+213
Update the events to v9, update events for knightslanding by the latest event converter tools. Use script at: https://github.com/intel/event-converter-for-linux-perf/blob/master/download_and_gen.py to download and generate the latest events and metrics. Manually copy the knightslanding files into perf. Signed-off-by: Xing Zhengjun <[email protected]> Tested-by: Ian Rogers <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-08-13perf vendor events: Update metrics for jaketownZhengjun Xing1-0/+6
The metrics are based on TMA 4.4 full, add new metrics “UNCORE_FREQ” for jaketown. Use script at: https://github.com/intel/event-converter-for-linux-perf/blob/master/download_and_gen.py to download and generate the latest events and metrics. Manually copy the jaketown files into perf. Signed-off-by: Xing Zhengjun <[email protected]> Tested-by: Ian Rogers <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-08-13perf vendor events: Update metrics for ivytownZhengjun Xing1-0/+6
The metrics are based on TMA 4.4 full, add new metrics “UNCORE_FREQ” for ivytown. Use script at: https://github.com/intel/event-converter-for-linux-perf/blob/master/download_and_gen.py to download and generate the latest events and metrics. Manually copy the ivytown files into perf. Signed-off-by: Xing Zhengjun <[email protected]> Tested-by: Ian Rogers <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-08-13perf vendor events: Update events and metrics for icelakexZhengjun Xing4-556/+38332
Update the events to v1.15, the metrics are based on TMA 4.4 full, update events and metrics for icelakex by the latest event converter tools. Use script at: https://github.com/intel/event-converter-for-linux-perf/blob/master/download_and_gen.py to download and generate the latest events and metrics. Manually copy the icelakex files into perf. Signed-off-by: Xing Zhengjun <[email protected]> Tested-by: Ian Rogers <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-08-13perf vendor events: Update events and metrics for haswellxZhengjun Xing2-171/+413
Update the events to v25, the metrics are based on TMA 4.4 full, update events and metrics for haswellx by the latest event converter tools. Use script at: https://github.com/intel/event-converter-for-linux-perf/blob/master/download_and_gen.py to download and generate the latest events and metrics. Manually copy the haswellx files into perf. Signed-off-by: Xing Zhengjun <[email protected]> Tested-by: Ian Rogers <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.