aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-06-25locking/atomics: Provide the arch_atomic_ interface to generic codePeter Zijlstra2-1/+266
Architectures with instrumented (KASAN/KCSAN) atomic operations natively provide arch_atomic_ variants that are not instrumented. It turns out that some generic code also requires arch_atomic_ in order to avoid instrumentation, so provide the arch_atomic_ interface as a direct map into the regular atomic_ interface for non-instrumented architectures. Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Paul E. McKenney <[email protected]>
2020-06-25arm64: perf: Report the PC value in REGS_ABI_32 modeJiping Ma1-3/+22
A 32-bit perf querying the registers of a compat task using REGS_ABI_32 will receive zeroes from w15, when it expects to find the PC. Return the PC value for register dwarf register 15 when returning register values for a compat task to perf. Cc: <[email protected]> Acked-by: Mark Rutland <[email protected]> Signed-off-by: Jiping Ma <[email protected]> Link: https://lore.kernel.org/r/[email protected] [will: Shuffled code and added a comment] Signed-off-by: Will Deacon <[email protected]>
2020-06-25io_uring: fix current->mm NULL dereference on exitPavel Begunkov1-0/+9
Don't reissue requests from io_iopoll_reap_events(), the task may not have mm, which ends up with NULL. It's better to kill everything off on exit anyway. [ 677.734670] RIP: 0010:io_iopoll_complete+0x27e/0x630 ... [ 677.734679] Call Trace: [ 677.734695] ? __send_signal+0x1f2/0x420 [ 677.734698] ? _raw_spin_unlock_irqrestore+0x24/0x40 [ 677.734699] ? send_signal+0xf5/0x140 [ 677.734700] io_iopoll_getevents+0x12f/0x1a0 [ 677.734702] io_iopoll_reap_events.part.0+0x5e/0xa0 [ 677.734703] io_ring_ctx_wait_and_kill+0x132/0x1c0 [ 677.734704] io_uring_release+0x20/0x30 [ 677.734706] __fput+0xcd/0x230 [ 677.734707] ____fput+0xe/0x10 [ 677.734709] task_work_run+0x67/0xa0 [ 677.734710] do_exit+0x35d/0xb70 [ 677.734712] do_group_exit+0x43/0xa0 [ 677.734713] get_signal+0x140/0x900 [ 677.734715] do_signal+0x37/0x780 [ 677.734717] ? enqueue_hrtimer+0x41/0xb0 [ 677.734718] ? recalibrate_cpu_khz+0x10/0x10 [ 677.734720] ? ktime_get+0x3e/0xa0 [ 677.734721] ? lapic_next_deadline+0x26/0x30 [ 677.734723] ? tick_program_event+0x4d/0x90 [ 677.734724] ? __hrtimer_get_next_event+0x4d/0x80 [ 677.734726] __prepare_exit_to_usermode+0x126/0x1c0 [ 677.734741] prepare_exit_to_usermode+0x9/0x40 [ 677.734742] idtentry_exit_cond_rcu+0x4c/0x60 [ 677.734743] sysvec_reschedule_ipi+0x92/0x160 [ 677.734744] ? asm_sysvec_reschedule_ipi+0xa/0x20 [ 677.734745] asm_sysvec_reschedule_ipi+0x12/0x20 Signed-off-by: Pavel Begunkov <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-06-25io_uring: fix hanging iopoll in case of -EAGAINPavel Begunkov1-7/+2
io_do_iopoll() won't do anything with a request unless req->iopoll_completed is set. So io_complete_rw_iopoll() has to set it, otherwise io_do_iopoll() will poll a file again and again even though the request of interest was completed long time ago. Also, remove -EAGAIN check from io_issue_sqe() as it races with the changed lines. The request will take the long way and be resubmitted from io_iopoll*(). io_kiocb's result and iopoll_completed") Fixes: bbde017a32b3 ("io_uring: add memory barrier to synchronize Signed-off-by: Pavel Begunkov <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-06-25cpuidle: Rearrange s2idle-specific idle state entry codeRafael J. Wysocki2-7/+14
Implement call_cpuidle_s2idle() in analogy with call_cpuidle() for the s2idle-specific idle state entry and invoke it from cpuidle_idle_call() to make the s2idle-specific idle entry code path look more similar to the "regular" idle entry one. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <[email protected]> Acked-by: Chen Yu <[email protected]>
2020-06-25x86/entry: Fix #UD vs WARN morePeter Zijlstra1-34/+38
vmlinux.o: warning: objtool: exc_invalid_op()+0x47: call to probe_kernel_read() leaves .noinstr.text section Since we use UD2 as a short-cut for 'CALL __WARN', treat it as such. Have the bare exception handler do the report_bug() thing. Fixes: 15a416e8aaa7 ("x86/entry: Treat BUG/WARN as NMI-like entries") Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Acked-by: Andy Lutomirski <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-06-25x86/entry: Increase entry_stack size to a full pagePeter Zijlstra1-1/+1
Marco crashed in bad_iret with a Clang11/KCSAN build due to overflowing the stack. Now that we run C code on it, expand it to a full page. Suggested-by: Andy Lutomirski <[email protected]> Reported-by: Marco Elver <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Reviewed-by: Lai Jiangshan <[email protected]> Tested-by: Marco Elver <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-06-25x86/entry: Fixup bad_iret vs noinstrPeter Zijlstra2-3/+7
vmlinux.o: warning: objtool: fixup_bad_iret()+0x8e: call to memcpy() leaves .noinstr.text section Worse, when KASAN there is no telling what memcpy() actually is. Force the use of __memcpy() which is our assmebly implementation. Reported-by: Marco Elver <[email protected]> Suggested-by: Marco Elver <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Tested-by: Marco Elver <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-06-25objtool: Don't consider vmlinux a C-filePeter Zijlstra1-1/+1
Avoids issuing C-file warnings for vmlinux. Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-06-25kasan: Fix required compiler versionMarco Elver1-1/+1
The first working GCC version to satisfy CC_HAS_WORKING_NOSANITIZE_ADDRESS is GCC 8.3.0. Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=89124 Reported-by: Stephen Rothwell <[email protected]> Signed-off-by: Marco Elver <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-06-25kdb: Make kdb_printf() console handling more robustSumit Garg1-0/+11
While rounding up CPUs via NMIs, its possible that a rounded up CPU maybe holding a console port lock leading to kgdb master CPU stuck in a deadlock during invocation of console write operations. A similar deadlock could also be possible while using synchronous breakpoints. So in order to avoid such a deadlock, set oops_in_progress to encourage the console drivers to disregard their internal spin locks: in the current calling context the risk of deadlock is a bigger problem than risks due to re-entering the console driver. We operate directly on oops_in_progress rather than using bust_spinlocks() because the calls bust_spinlocks() makes on exit are not appropriate for this calling context. Suggested-by: Sergey Senozhatsky <[email protected]> Signed-off-by: Sumit Garg <[email protected]> Reviewed-by: Douglas Anderson <[email protected]> Reviewed-by: Petr Mladek <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Daniel Thompson <[email protected]>
2020-06-25kdb: Check status of console prior to invoking handlersSumit Garg1-0/+2
Check if a console is enabled prior to invoking corresponding write handler. Suggested-by: Sergey Senozhatsky <[email protected]> Signed-off-by: Sumit Garg <[email protected]> Reviewed-by: Daniel Thompson <[email protected]> Reviewed-by: Douglas Anderson <[email protected]> Reviewed-by: Petr Mladek <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Daniel Thompson <[email protected]>
2020-06-25kdb: Re-factor kdb_printf() message write codeSumit Garg1-29/+28
Re-factor kdb_printf() message write code in order to avoid duplication of code and thereby increase readability. Signed-off-by: Sumit Garg <[email protected]> Reviewed-by: Douglas Anderson <[email protected]> Reviewed-by: Petr Mladek <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Daniel Thompson <[email protected]>
2020-06-25Merge tag 'amd-drm-fixes-5.8-2020-06-24' of ↵Dave Airlie6-6/+16
git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.8-2020-06-24: amdgpu: - Fix missed mutex unlock in DC error path - Fix firmware leak for sdma5 - DC bpc property fixes amdkfd: - Fix memleak in an error path radeon: - Fix copy paste typo in NI DPM spll validation Signed-off-by: Dave Airlie <[email protected]> From: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-06-24Merge branch 'net-bcmgenet-use-hardware-padding-of-runt-frames'David S. Miller1-83/+5
Doug Berger says: ==================== net: bcmgenet: use hardware padding of runt frames Now that scatter-gather and tx-checksumming are enabled by default it revealed a packet corruption issue that can occur for very short fragmented packets. When padding these frames to the minimum length it is possible for the non-linear (fragment) data to be added to the end of the linear header in an SKB. Since the number of fragments is read before the padding and used afterward without reloading, the fragment that should have been consumed can be tacked on in place of part of the padding. The third commit in this set corrects this by removing the software padding and allowing the hardware to add the pad bytes if necessary. The first two commits resolve warnings observed by the kbuild test robot and are included here for simplicity of application. ==================== Signed-off-by: David S. Miller <[email protected]>
2020-06-24net: bcmgenet: use hardware padding of runt framesDoug Berger1-5/+3
When commit 474ea9cafc45 ("net: bcmgenet: correctly pad short packets") added the call to skb_padto() it should have been located before the nr_frags parameter was read since that value could be changed when padding packets with lengths between 55 and 59 bytes (inclusive). The use of a stale nr_frags value can cause corruption of the pad data when tx-scatter-gather is enabled. This corruption of the pad can cause invalid checksum computation when hardware offload of tx-checksum is also enabled. Since the original reason for the padding was corrected by commit 7dd399130efb ("net: bcmgenet: fix skb_len in bcmgenet_xmit_single()") we can remove the software padding all together and make use of hardware padding of short frames as long as the hardware also always appends the FCS value to the frame. Fixes: 474ea9cafc45 ("net: bcmgenet: correctly pad short packets") Signed-off-by: Doug Berger <[email protected]> Acked-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-24net: bcmgenet: use __be16 for htons(ETH_P_IP)Doug Berger1-1/+2
The 16-bit value that holds a short in network byte order should be declared as a restricted big endian type to allow type checks to succeed during assignment. Fixes: 3e370952287c ("net: bcmgenet: add support for ethtool rxnfc flows") Reported-by: kbuild test robot <[email protected]> Signed-off-by: Doug Berger <[email protected]> Acked-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-24net: bcmgenet: re-remove bcmgenet_hfb_add_filterDoug Berger1-77/+0
This function was originally removed by Baoyou Xie in commit e2072600a241 ("net: bcmgenet: remove unused function in bcmgenet.c") to prevent a build warning. Some of the functions removed by Baoyou Xie are now used for WAKE_FILTER support so his commit was reverted, but this function is still unused and the kbuild test robot dutifully reported the warning. This commit once again removes the remaining unused hfb functions. Fixes: 14da1510fedc ("Revert "net: bcmgenet: remove unused function in bcmgenet.c"") Reported-by: kbuild test robot <[email protected]> Signed-off-by: Doug Berger <[email protected]> Acked-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-25Merge tag 'drm/tegra/for-5.8-rc3' of ↵Dave Airlie5-4/+37
git://anongit.freedesktop.org/tegra/linux into drm-fixes drm/tegra: Fixes for v5.8-rc3 This contains a fairly random assortment of fixes for various minor issues. Signed-off-by: Dave Airlie <[email protected]> From: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-06-25Merge tag 'du-fixes-20200621' of git://linuxtv.org/pinchartl/media into ↵Dave Airlie1-0/+1
drm-fixes Build fix for the R-Car DU DRM driver Signed-off-by: Dave Airlie <[email protected]> From: Laurent Pinchart <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-06-24Merge tag 'erofs-for-5.8-rc3-fixes' of ↵Linus Torvalds1-10/+10
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs Pull erofs fix from Gao Xiang: "Fix a regression which uses potential uninitialized high 32-bit value unexpectedly recently observed with specific compiler options" * tag 'erofs-for-5.8-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: erofs: fix partially uninitialized misuse in z_erofs_onlinepage_fixup
2020-06-25selftests: netfilter: add test case for conntrack helper assignmentFlorian Westphal2-1/+176
check that 'nft ... ct helper set <foo>' works: 1. configure ftp helper via nft and assign it to connections on port 2121 2. check with 'conntrack -L' that the next connection has the ftp helper attached to it. Also add a test for auto-assign (old behaviour). Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2020-06-25netfilter: ip6tables: Add a .pre_exit hook in all ip6table_foo.c.David Wilder5-6/+44
Using new helpers ip6t_unregister_table_pre_exit() and ip6t_unregister_table_exit(). Fixes: b9e69e127397 ("netfilter: xtables: don't hook tables by default") Signed-off-by: David Wilder <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2020-06-25netfilter: ip6tables: Split ip6t_unregister_table() into pre_exit and exit ↵David Wilder2-1/+17
helpers. The pre_exit will un-register the underlying hook and .exit will do the table freeing. The netns core does an unconditional synchronize_rcu after the pre_exit hooks insuring no packets are in flight that have picked up the pointer before completing the un-register. Fixes: b9e69e127397 ("netfilter: xtables: don't hook tables by default") Signed-off-by: David Wilder <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2020-06-25netfilter: iptables: Add a .pre_exit hook in all iptable_foo.c.David Wilder5-7/+44
Using new helpers ipt_unregister_table_pre_exit() and ipt_unregister_table_exit(). Fixes: b9e69e127397 ("netfilter: xtables: don't hook tables by default") Signed-off-by: David Wilder <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2020-06-25netfilter: iptables: Split ipt_unregister_table() into pre_exit and exit ↵David Wilder2-1/+20
helpers. The pre_exit will un-register the underlying hook and .exit will do the table freeing. The netns core does an unconditional synchronize_rcu after the pre_exit hooks insuring no packets are in flight that have picked up the pointer before completing the un-register. Fixes: b9e69e127397 ("netfilter: xtables: don't hook tables by default") Signed-off-by: David Wilder <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2020-06-25netfilter: Add MODULE_DESCRIPTION entries to kernel modulesRob Gill41-0/+41
The user tool modinfo is used to get information on kernel modules, including a description where it is available. This patch adds a brief MODULE_DESCRIPTION to netfilter kernel modules (descriptions taken from Kconfig file or code comments) Signed-off-by: Rob Gill <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2020-06-25netfilter: ipset: fix unaligned atomic accessRussell King1-0/+2
When using ip_set with counters and comment, traffic causes the kernel to panic on 32-bit ARM: Alignment trap: not handling instruction e1b82f9f at [<bf01b0dc>] Unhandled fault: alignment exception (0x221) at 0xea08133c PC is at ip_set_match_extensions+0xe0/0x224 [ip_set] The problem occurs when we try to update the 64-bit counters - the faulting address above is not 64-bit aligned. The problem occurs due to the way elements are allocated, for example: set->dsize = ip_set_elem_len(set, tb, 0, 0); map = ip_set_alloc(sizeof(*map) + elements * set->dsize); If the element has a requirement for a member to be 64-bit aligned, and set->dsize is not a multiple of 8, but is a multiple of four, then every odd numbered elements will be misaligned - and hitting an atomic64_add() on that element will cause the kernel to panic. ip_set_elem_len() must return a size that is rounded to the maximum alignment of any extension field stored in the element. This change ensures that is the case. Fixes: 95ad1f4a9358 ("netfilter: ipset: Fix extension alignment") Signed-off-by: Russell King <[email protected]> Acked-by: Jozsef Kadlecsik <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2020-06-24drm/amd: fix potential memleak in err branchBernard Zhao1-0/+1
The function kobject_init_and_add alloc memory like: kobject_init_and_add->kobject_add_varg->kobject_set_name_vargs ->kvasprintf_const->kstrdup_const->kstrdup->kmalloc_track_caller ->kmalloc_slab, in err branch this memory not free. If use kmemleak, this path maybe catched. These changes are to add kobject_put in kobject_init_and_add failed branch, fix potential memleak. Signed-off-by: Bernard Zhao <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2020-06-24drm/amd/display: Fix ineffective setting of max bpc propertyStylon Wang1-1/+2
[Why] Regression was introduced where setting max bpc property has no effect on the atomic check and final commit. It has the same effect as max bpc being stuck at 8. [How] Correctly propagate max bpc with the new connector state. Signed-off-by: Stylon Wang <[email protected]> Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2020-06-24drm/amd/display: Enable output_bpc property on all outputsStylon Wang1-1/+3
[Why] Connector property output_bpc is available on DP/eDP only. New IGT tests would benifit if this property works on HDMI. [How] Enable this read-only property on all types of connectors. Signed-off-by: Stylon Wang <[email protected]> Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2020-06-24drm/amdgpu: add fw release for sdma v5_0Wenhui Sheng1-1/+5
sdma fw isn't released when module exit Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Wenhui Sheng <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2020-06-24qed: add missing error test for DBG_STATUS_NO_MATCHING_FRAMING_MODEColin Ian King1-1/+2
The error DBG_STATUS_NO_MATCHING_FRAMING_MODE was added to the enum enum dbg_status however there is a missing corresponding entry for this in the array s_status_str. This causes an out-of-bounds read when indexing into the last entry of s_status_str. Fix this by adding in the missing entry. Addresses-Coverity: ("Out-of-bounds read"). Fixes: 2d22bc8354b1 ("qed: FW 8.42.2.0 debug features") Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-24Merge branch 'net-phy-call-phy_disable_interrupts-in-phy_init_hw'David S. Miller3-1/+6
Jisheng Zhang says: ==================== net: phy: call phy_disable_interrupts() in phy_init_hw() We face an issue with rtl8211f, a pin is shared between INTB and PMEB, and the PHY Register Accessible Interrupt is enabled by default, so the INTB/PMEB pin is always active in polling mode case. As Heiner pointed out "I was thinking about calling phy_disable_interrupts() in phy_init_hw(), to have a defined init state as we don't know in which state the PHY is if the PHY driver is loaded. We shouldn't assume that it's the chip power-on defaults, BIOS or boot loader could have changed this. Or in case of dual-boot systems the other OS could leave the PHY in whatever state." patch1 makes phy_disable_interrupts() non-static so that it could be used in phy_init_hw() to have a defined init state. patch2 calls phy_disable_interrupts() in phy_init_hw() to have a defined init state. Since v3: - call phy_disable_interrupts() have interrupts disabled first then config_init, thank Florian Since v2: - Don't export phy_disable_interrupts() but just make it non-static Since v1: - EXPORT the correct symbol ==================== Signed-off-by: David S. Miller <[email protected]>
2020-06-24net: phy: call phy_disable_interrupts() in phy_init_hw()Jisheng Zhang1-0/+4
Call phy_disable_interrupts() in phy_init_hw() to "have a defined init state as we don't know in which state the PHY is if the PHY driver is loaded. We shouldn't assume that it's the chip power-on defaults, BIOS or boot loader could have changed this. Or in case of dual-boot systems the other OS could leave the PHY in whatever state." as pointed out by Heiner. Suggested-by: Heiner Kallweit <[email protected]> Signed-off-by: Jisheng Zhang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-24net: phy: make phy_disable_interrupts() non-staticJisheng Zhang2-1/+2
We face an issue with rtl8211f, a pin is shared between INTB and PMEB, and the PHY Register Accessible Interrupt is enabled by default, so the INTB/PMEB pin is always active in polling mode case. As Heiner pointed out "I was thinking about calling phy_disable_interrupts() in phy_init_hw(), to have a defined init state as we don't know in which state the PHY is if the PHY driver is loaded. We shouldn't assume that it's the chip power-on defaults, BIOS or boot loader could have changed this. Or in case of dual-boot systems the other OS could leave the PHY in whatever state." Make phy_disable_interrupts() non-static so that it could be used in phy_init_hw() to have a defined init state. Suggested-by: Heiner Kallweit <[email protected]> Signed-off-by: Jisheng Zhang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-24net: ethernet: mvneta: Add back interface mode validationSascha Hauer1-3/+19
When writing the serdes configuration register was moved to mvneta_config_interface() the whole code block was removed from mvneta_port_power_up() in the assumption that its only purpose was to write the serdes configuration register. As mentioned by Russell King its purpose was also to check for valid interface modes early so that later in the driver we do not have to care for unexpected interface modes. Add back the test to let the driver bail out early on unhandled interface modes. Fixes: b4748553f53f ("net: ethernet: mvneta: Fix Serdes configuration for SoCs without comphy") Signed-off-by: Sascha Hauer <[email protected]> Reviewed-by: Russell King <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-24net: ethernet: mvneta: Do not error out in non serdes modesSascha Hauer1-1/+1
In mvneta_config_interface() the RGMII modes are catched by the default case which is an error return. The RGMII modes are valid modes for the driver, so instead of returning an error add a break statement to return successfully. This avoids this warning for non comphy SoCs which use RGMII, like SolidRun Clearfog: WARNING: CPU: 0 PID: 268 at drivers/net/ethernet/marvell/mvneta.c:3512 mvneta_start_dev+0x220/0x23c Fixes: b4748553f53f ("net: ethernet: mvneta: Fix Serdes configuration for SoCs without comphy") Signed-off-by: Sascha Hauer <[email protected]> Reviewed-by: Russell King <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-24dsa: Allow forwarding of redirected IGMP trafficDaniel Mack1-3/+34
The driver for Marvell switches puts all ports in IGMP snooping mode which results in all IGMP/MLD frames that ingress on the ports to be forwarded to the CPU only. The bridge code in the kernel can then interpret these frames and act upon them, for instance by updating the mdb in the switch to reflect multicast memberships of stations connected to the ports. However, the IGMP/MLD frames must then also be forwarded to other ports of the bridge so external IGMP queriers can track membership reports, and external multicast clients can receive query reports from foreign IGMP queriers. Currently, this is impossible as the EDSA tagger sets offload_fwd_mark on the skb when it unwraps the tagged frames, and that will make the switchdev layer prevent the skb from egressing on any other port of the same switch. To fix that, look at the To_CPU code in the DSA header and make forwarding of the frame possible for trapped IGMP packets. Introduce some #defines for the frame types to make the code a bit more comprehensive. This was tested on a Marvell 88E6352 variant. Signed-off-by: Daniel Mack <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Tested-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-24openvswitch: take into account de-fragmentation/gso_size in ↵Lorenzo Bianconi1-2/+7
execute_check_pkt_len ovs connection tracking module performs de-fragmentation on incoming fragmented traffic. Take info account if traffic has been de-fragmented in execute_check_pkt_len action otherwise we will perform the wrong nested action considering the original packet size. This issue typically occurs if ovs-vswitchd adds a rule in the pipeline that requires connection tracking (e.g. OVN stateful ACLs) before execute_check_pkt_len action. Moreover take into account GSO fragment size for GSO packet in execute_check_pkt_len routine Fixes: 4d5ec89fc8d14 ("net: openvswitch: Add a new action check_pkt_len") Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-24Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds9-35/+207
Pull virtio fixes from Michael Tsirkin: "Fixes all over the place. This includes a couple of tests that I would normally defer, but since they have already been helpful in catching some bugs, don't build for any users at all, and having them upstream makes life easier for everyone, I think it's ok even at this late stage" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: tools/virtio: Use tools/include/list.h instead of stubs tools/virtio: Reset index in virtio_test --reset. tools/virtio: Extract virtqueue initialization in vq_reset tools/virtio: Use __vring_new_virtqueue in virtio_test.c tools/virtio: Add --reset tools/virtio: Add --batch=random option tools/virtio: Add --batch option virtio-mem: add memory via add_memory_driver_managed() virtio-mem: silence a static checker warning vhost_vdpa: Fix potential underflow in vhost_vdpa_mmap() vdpa: fix typos in the comments for __vdpa_alloc_device()
2020-06-24Merge tag 'for-linus-2020-06-24' of ↵Linus Torvalds4-6/+18
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull thread fix from Christian Brauner: "This fixes a regression introduced with 303cc571d107 ("nsproxy: attach to namespaces via pidfds"). The LTP testsuite reported a regression where users would now see EBADF returned instead of EINVAL when an fd was passed that referred to an open file but the file was not a namespace file. Fix this by continuing to report EINVAL and add a regression test" * tag 'for-linus-2020-06-24' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: tests: test for setns() EINVAL regression nsproxy: restore EINVAL for non-namespace file descriptor
2020-06-24drm/fb-helper: Fix vt restoreDaniel Vetter3-15/+52
In the past we had a pile of hacks to orchestrate access between fbdev emulation and native kms clients. We've tried to streamline this, by always preferring the kms side above fbdev calls when a drm master exists, because drm master controls access to the display resources. Unfortunately this breaks existing userspace, specifically Xorg. When exiting Xorg first restores the console to text mode using the KDSET ioctl on the vt. This does nothing, because a drm master is still around. Then it drops the drm master status, which again does nothing, because logind is keeping additional drm fd open to be able to orchestrate vt switches. In the past this is the point where fbdev was restored, as part of the ->lastclose hook on the drm side. Now to fix this regression we don't want to go back to letting fbdev restore things whenever it feels like, or to the pile of hacks we've had before. Instead try and go with a minimal exception to make the KDSET case work again, and nothing else. This means that if userspace does a KDSET call when switching between graphical compositors, there will be some flickering with fbcon showing up for a bit. But a) that's not a regression and b) userspace can fix it by improving the vt switching dance - logind should have all the information it needs. While pondering all this I'm also wondering wheter we should have a SWITCH_MASTER ioctl to allow race-free master status handover. But that's for another day. v2: Somehow forgot to cc all the fbdev people. v3: Fix typo Alex spotted. Reviewed-by: Alex Deucher <[email protected]> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=208179 Cc: [email protected] Reported-and-Tested-by: [email protected] Cc: Michel Dänzer <[email protected]> Fixes: 64914da24ea9 ("drm/fbdev-helper: don't force restores") Cc: Noralf Trønnes <[email protected]> Cc: Thomas Zimmermann <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: Maarten Lankhorst <[email protected]> Cc: Maxime Ripard <[email protected]> Cc: David Airlie <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: [email protected] Cc: <[email protected]> # v5.7+ Cc: Bartlomiej Zolnierkiewicz <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Cc: Nathan Chancellor <[email protected]> Cc: Qiujun Huang <[email protected]> Cc: Peter Rosin <[email protected]> Cc: [email protected] Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-06-24IB/hfi1: Add atomic triggered sleep/wakeupMike Marciniszyn2-20/+53
When running iperf in a two host configuration the following trace can occur: [ 319.728730] NETDEV WATCHDOG: ib0 (hfi1): transmit queue 0 timed out The issue happens because the current implementation relies on the netif txq being stopped to control the flushing of the tx list. There are two resources that the transmit logic can wait on and stop the txq: - SDMA descriptors - Ring space to hold completions The ring space is tested on the sending side and relieved when the ring is consumed in the napi tx reaping. Unfortunately, that reaping can run conncurrently with the workqueue flushing of the txlist. If the txq is started just before the workitem executes, the txlist will never be flushed, leading to the txq being stuck. Fix by: - Adding sleep/wakeup wrappers * Use an atomic to control the call to the netif routines inside the wrappers - Use another atomic to record ring space exhaustion * Only wakeup when the a ring space exhaustion has happened and it relieved Add additional wrappers to clarify the ring space resource handling. Fixes: d99dc602e2a5 ("IB/hfi1: Add functions to transmit datagram ipoib packets") Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Kaike Wan <[email protected]> Signed-off-by: Mike Marciniszyn <[email protected]> Signed-off-by: Dennis Dalessandro <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-06-24IB/hfi1: Correct -EBUSY handling in tx codeMike Marciniszyn1-17/+18
The current code mishandles -EBUSY in two ways: - The flow change doesn't test the return from the flush and runs on to process the current packet racing with the wakeup processing - The -EBUSY handling for a single packet inserts the tx into the txlist after the submit call, racing with the same wakeup processing Fix the first by dropping the skb and returning NETDEV_TX_OK. Fix the second by insuring the the list entry within the txreq is inited when allocated. This enables the sleep routine to detect that the txreq has used the non-list api and queue the packet to the txlist. Both flaws can lead to having the flushing thread executing in causing two threads to manipulate the txlist. Fixes: d99dc602e2a5 ("IB/hfi1: Add functions to transmit datagram ipoib packets") Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Kaike Wan <[email protected]> Signed-off-by: Mike Marciniszyn <[email protected]> Signed-off-by: Dennis Dalessandro <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-06-24IB/hfi1: Fix module use count flaw due to leftover module put callsDennis Dalessandro1-17/+2
When the try_module_get calls were removed from opening and closing of the i2c debugfs file, the corresponding module_put calls were missed. This results in an inaccurate module use count that requires a power cycle to fix. Fixes: 09fbca8e6240 ("IB/hfi1: No need to use try_module_get for debugfs") Link: https://lore.kernel.org/r/[email protected] Cc: <[email protected]> Reviewed-by: Kaike Wan <[email protected]> Reviewed-by: Mike Marciniszyn <[email protected]> Signed-off-by: Dennis Dalessandro <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-06-24IB/hfi1: Restore kfree in dummy_netdev cleanupDennis Dalessandro1-1/+1
We need to do some rework on the dummy netdev. Calling the free_netdev() would normally make sense, and that will be addressed in an upcoming patch. For now just revert the behavior to what it was before keeping the unused variable removal part of the patch. The dd->dumm_netdev is mainly used for packet receiving through alloc_netdev_mqs() for typical net devices. A a result, it should be freed with kfree instead of free_netdev() that leads to a crash when unloading the hfi1 module: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 8000000855b54067 P4D 8000000855b54067 PUD 84a4f5067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 73 PID: 10299 Comm: modprobe Not tainted 5.6.0-rc5+ #1 Hardware name: Intel Corporation S2600WT2R/S2600WT2R, BIOS SE5C610.86B.01.01.0016.033120161139 03/31/2016 RIP: 0010:__hw_addr_flush+0x12/0x80 Code: 40 00 48 83 c4 08 4c 89 e7 5b 5d 41 5c e9 76 77 18 00 66 0f 1f 44 00 00 0f 1f 44 00 00 41 54 49 89 fc 55 53 48 8b 1f 48 39 df <48> 8b 2b 75 08 eb 4a 48 89 eb 48 89 c5 48 89 df e8 99 bf d0 ff 84 RSP: 0018:ffffb40e08783db8 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000002 RDX: ffffb40e00000000 RSI: 0000000000000246 RDI: ffff88ab13662298 RBP: ffff88ab13662000 R08: 0000000000001549 R09: 0000000000001549 R10: 0000000000000001 R11: 0000000000aaaaaa R12: ffff88ab13662298 R13: ffff88ab1b259e20 R14: ffff88ab1b259e42 R15: 0000000000000000 FS: 00007fb39b534740(0000) GS:ffff88b31f940000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000084d3ea004 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: dev_addr_flush+0x15/0x30 free_netdev+0x7e/0x130 hfi1_netdev_free+0x59/0x70 [hfi1] remove_one+0x65/0x110 [hfi1] pci_device_remove+0x3b/0xc0 device_release_driver_internal+0xec/0x1b0 driver_detach+0x46/0x90 bus_remove_driver+0x58/0xd0 pci_unregister_driver+0x26/0xa0 hfi1_mod_cleanup+0xc/0xd54 [hfi1] __x64_sys_delete_module+0x16c/0x260 ? exit_to_usermode_loop+0xa4/0xc0 do_syscall_64+0x5b/0x200 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 193ba03141bb ("IB/hfi1: Use free_netdev() in hfi1_netdev_free()") Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Mike Marciniszyn <[email protected]> Signed-off-by: Kaike Wan <[email protected]> Signed-off-by: Dennis Dalessandro <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-06-24nvme-multipath: fix bogus request queue reference putSagi Grimberg1-0/+8
The mpath disk node takes a reference on the request mpath request queue when adding live path to the mpath gendisk. However if we connected to an inaccessible path device_add_disk is not called, so if we disconnect and remove the mpath gendisk we endup putting an reference on the request queue that was never taken [1]. Fix that to check if we ever added a live path (using NVME_NS_HEAD_HAS_DISK flag) and if not, clear the disk->queue reference. [1]: ------------[ cut here ]------------ refcount_t: underflow; use-after-free. WARNING: CPU: 1 PID: 1372 at lib/refcount.c:28 refcount_warn_saturate+0xa6/0xf0 CPU: 1 PID: 1372 Comm: nvme Tainted: G O 5.7.0-rc2+ #3 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1 04/01/2014 RIP: 0010:refcount_warn_saturate+0xa6/0xf0 RSP: 0018:ffffb29e8053bdc0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8b7a2f4fc060 RCX: 0000000000000007 RDX: 0000000000000007 RSI: 0000000000000092 RDI: ffff8b7a3ec99980 RBP: ffff8b7a2f4fc000 R08: 00000000000002e1 R09: 0000000000000004 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 R13: fffffffffffffff2 R14: ffffb29e8053bf08 R15: ffff8b7a320e2da0 FS: 00007f135d4ca800(0000) GS:ffff8b7a3ec80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005651178c0c30 CR3: 000000003b650005 CR4: 0000000000360ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: disk_release+0xa2/0xc0 device_release+0x28/0x80 kobject_put+0xa5/0x1b0 nvme_put_ns_head+0x26/0x70 [nvme_core] nvme_put_ns+0x30/0x60 [nvme_core] nvme_remove_namespaces+0x9b/0xe0 [nvme_core] nvme_do_delete_ctrl+0x43/0x5c [nvme_core] nvme_sysfs_delete.cold+0x8/0xd [nvme_core] kernfs_fop_write+0xc1/0x1a0 vfs_write+0xb6/0x1a0 ksys_write+0x5f/0xe0 do_syscall_64+0x52/0x1a0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Reported-by: Anton Eidelman <[email protected]> Tested-by: Anton Eidelman <[email protected]> Signed-off-by: Sagi Grimberg <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2020-06-24nvme-multipath: fix deadlock due to head->lockAnton Eidelman2-2/+4
In the following scenario scan_work and ana_work will deadlock: When scan_work calls nvme_mpath_add_disk() this holds ana_lock and invokes nvme_parse_ana_log(), which may issue IO in device_add_disk() and hang waiting for an accessible path. While nvme_mpath_set_live() only called when nvme_state_is_live(), a transition may cause NVME_SC_ANA_TRANSITION and requeue the IO. Since nvme_mpath_set_live() holds ns->head->lock, an ana_work on ANY ctrl will not be able to complete nvme_mpath_set_live() on the same ns->head, which is required in order to update the new accessible path and remove NVME_NS_ANA_PENDING.. Therefore IO never completes: deadlock [1]. Fix: Move device_add_disk out of the head->lock and protect it with an atomic test_and_set for a new NVME_NS_HEAD_HAS_DISK bit. [1]: kernel: INFO: task kworker/u8:2:160 blocked for more than 120 seconds. kernel: Tainted: G OE 5.3.5-050305-generic #201910071830 kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kernel: kworker/u8:2 D 0 160 2 0x80004000 kernel: Workqueue: nvme-wq nvme_ana_work [nvme_core] kernel: Call Trace: kernel: __schedule+0x2b9/0x6c0 kernel: schedule+0x42/0xb0 kernel: schedule_preempt_disabled+0xe/0x10 kernel: __mutex_lock.isra.0+0x182/0x4f0 kernel: __mutex_lock_slowpath+0x13/0x20 kernel: mutex_lock+0x2e/0x40 kernel: nvme_update_ns_ana_state+0x22/0x60 [nvme_core] kernel: nvme_update_ana_state+0xca/0xe0 [nvme_core] kernel: nvme_parse_ana_log+0xa1/0x180 [nvme_core] kernel: nvme_read_ana_log+0x76/0x100 [nvme_core] kernel: nvme_ana_work+0x15/0x20 [nvme_core] kernel: process_one_work+0x1db/0x380 kernel: worker_thread+0x4d/0x400 kernel: kthread+0x104/0x140 kernel: ret_from_fork+0x35/0x40 kernel: INFO: task kworker/u8:4:439 blocked for more than 120 seconds. kernel: Tainted: G OE 5.3.5-050305-generic #201910071830 kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kernel: kworker/u8:4 D 0 439 2 0x80004000 kernel: Workqueue: nvme-wq nvme_scan_work [nvme_core] kernel: Call Trace: kernel: __schedule+0x2b9/0x6c0 kernel: schedule+0x42/0xb0 kernel: io_schedule+0x16/0x40 kernel: do_read_cache_page+0x438/0x830 kernel: read_cache_page+0x12/0x20 kernel: read_dev_sector+0x27/0xc0 kernel: read_lba+0xc1/0x220 kernel: efi_partition+0x1e6/0x708 kernel: check_partition+0x154/0x244 kernel: rescan_partitions+0xae/0x280 kernel: __blkdev_get+0x40f/0x560 kernel: blkdev_get+0x3d/0x140 kernel: __device_add_disk+0x388/0x480 kernel: device_add_disk+0x13/0x20 kernel: nvme_mpath_set_live+0x119/0x140 [nvme_core] kernel: nvme_update_ns_ana_state+0x5c/0x60 [nvme_core] kernel: nvme_mpath_add_disk+0xbe/0x100 [nvme_core] kernel: nvme_validate_ns+0x396/0x940 [nvme_core] kernel: nvme_scan_work+0x256/0x390 [nvme_core] kernel: process_one_work+0x1db/0x380 kernel: worker_thread+0x4d/0x400 kernel: kthread+0x104/0x140 kernel: ret_from_fork+0x35/0x40 Fixes: 0d0b660f214d ("nvme: add ANA support") Signed-off-by: Anton Eidelman <[email protected]> Signed-off-by: Sagi Grimberg <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2020-06-24nvme: don't protect ns mutation with ns->head->lockSagi Grimberg1-8/+4
Right now ns->head->lock is protecting namespace mutation which is wrong and unneeded. Move it to only protect against head mutations. While we're at it, remove unnecessary ns->head reference as we already have head pointer. The problem with this is that the head->lock spans mpath disk node I/O that may block under some conditions (if for example the controller is disconnecting or the path became inaccessible), The locking scheme does not allow any other path to enable itself, preventing blocked I/O to complete and forward-progress from there. This is a preparation patch for the fix in a subsequent patch where the disk I/O will also be done outside the head->lock. Fixes: 0d0b660f214d ("nvme: add ANA support") Signed-off-by: Anton Eidelman <[email protected]> Signed-off-by: Sagi Grimberg <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.