aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-01-05i2c: use DIV_ROUND_UP macro to do calculationZheng Yongjun1-3/+3
Don't open-code DIV_ROUND_UP() kernel macro. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-05i2c: fix platform_get_irq.cocci warningsTian Tao1-3/+1
Remove dev_err() messages after platform_get_irq*() failures. drivers/i2c/busses/i2c-hix5hd2.c:417:2-9: line 417 is redundant because platform_get_irq() already prints an error Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-05i2c: gpio: fix MODULE_LICENCEWolfram Sang1-1/+1
Let MODULE_LICENCE match the SPDX header which is correctly based on the previous textual description. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-05i2c: iproc: handle rx fifo full interruptRayagonda Kokatanur1-4/+17
Add code to handle IS_S_RX_FIFO_FULL_SHIFT interrupt to support master write request with >= 64 bytes. Iproc has a slave rx fifo size of 64 bytes. Rx fifo full interrupt (IS_S_RX_FIFO_FULL_SHIFT) will be generated when RX fifo becomes full. This can happen if master issues write request of more than 64 bytes. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Acked-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-05i2c: iproc: handle master read requestRayagonda Kokatanur1-45/+170
Handle single or multi byte master read request with or without repeated start. Fixes: c245d94ed106 ("i2c: iproc: Add multi byte read-write support for slave mode") Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Acked-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-05i2c: iproc: fix typo in slave_isr functionRayagonda Kokatanur1-1/+1
Fix typo in bcm_iproc_i2c_slave_isr(). Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Acked-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-05i2c: iproc: update slave isr mask (ISR_MASK_SLAVE)Rayagonda Kokatanur1-1/+2
Update slave isr mask (ISR_MASK_SLAVE) to include remaining two slave interrupts. Fixes: c245d94ed106 ("i2c: iproc: Add multi byte read-write support for slave mode") Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Acked-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-05i2c: iproc: handle only slave interrupts which are enabledRayagonda Kokatanur1-4/+9
Handle only slave interrupts which are enabled. The IS_OFFSET register contains the interrupt status bits which will be set regardless of the enabling of the corresponding interrupt condition. One must therefore look at both IS_OFFSET and IE_OFFSET to determine whether an interrupt condition is set and enabled. Fixes: c245d94ed106 ("i2c: iproc: Add multi byte read-write support for slave mode") Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Acked-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-05i2c: iproc: handle Master aborted errorRayagonda Kokatanur1-3/+5
Handle Master aborted error by flushing tx and rx fifo and reinitializing the hw. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Acked-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-05i2c: rcar: protect against supurious interrupts on V3UWolfram Sang1-14/+43
V3U creates spurious interrupts which we need to handle. This costs time until BUS_PHASE_DATA can be activated which is problematic for Gen2 SoCs and earlier. Because of this we introduce two interrupt handlers here which will call a generic main irq function once the timing critical stuff is done. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-05i2c: rcar: make sure irq is not threaded on Gen2 and earlierWolfram Sang1-1/+5
Ensure this irq runs as fast as possible. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-05i2c: rcar: optimize cacheline to minimize HW race conditionWolfram Sang1-1/+1
'flags' and 'io' are needed first, so they should be at the beginning of the private struct. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-05i2c: rcar: faster irq code to minimize HW race conditionWolfram Sang1-7/+4
To avoid the HW race condition on R-Car Gen2 and earlier, we need to write to ICMCR as soon as possible in the interrupt handler. We can improve this by writing a static value instead of masking out bits. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-05i2c: qcom-geni: Store DMA mapping data in geni_i2c_dev structRoja Rani Yarubandi1-16/+43
Store DMA mapping data in geni_i2c_dev struct to enhance DMA mapping data scope. For example during shutdown callback to unmap DMA mapping, this stored DMA mapping data can be used to call geni_se_tx_dma_unprep and geni_se_rx_dma_unprep functions. Add two helper functions geni_i2c_rx_msg_cleanup and geni_i2c_tx_msg_cleanup to unwrap the things after rx/tx FIFO/DMA transfers, so that the same can be used in geni_i2c_stop_xfer() function during shutdown callback. Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org> Reviewed-by: Akash Asthana <akashast@codeaurora.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-05i2c: i801: Refactor mux code since platform_device_unregister() is NULL awareAndy Shevchenko1-7/+3
platform_device_unregister() is NULL-aware and thus doesn't required a duplication check in i801_del_mux(). Besides that it's also error pointer aware, and we may drop unneeded assignment in i801_add_mux() followed by conversion to PTR_ERR_OR_ZERO() for the returned value. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-05i2c: i801: Drop duplicate NULL check in i801_del_mux()Andy Shevchenko1-2/+1
Since gpiod_remove_lookup_table() is NULL-aware, no need to have this check in the caller. Drop duplicate NULL check. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-05gpiolib: Follow usual pattern for gpiod_remove_lookup_table() callAndy Shevchenko1-0/+4
The usual pattern for the remove calls, like gpiod_remove_lookup_table(), is to be NULL-aware, i.o.w. become a no-op whenever parameter is NULL. Update gpiod_remove_lookup_table() call to follow this pattern. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-05i2c: mlxcpld: Decrease polling time for performance improvementVadim Pasternak1-1/+1
Decrease polling time 'MLXCPLD_I2C_POLL_TIME' from 2000 usec to 400 usec. It greatly improves performance of I2C transactions. Reliability of setting polling time to 400 usec has been thoroughly validated across all the supported systems. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-05i2c: mlxcpld: Update module licenseVadim Pasternak1-29/+3
Update license to SPDX-License. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-05i2c: core: Do not print duplicate error when failing to register an ↵Hans de Goede1-5/+1
i2c-client from ACPI i2c_new_client_device() already prints an error when it fails. Some ACPI tables contain 2 ACPI devices describing the same i2c-client, leading to errors like this: [ 1.620847] i2c i2c-4: Failed to register i2c client MAGN0001:00 at 0x1d (-16) [ 1.620870] i2c i2c-4: failed to add I2C device MAGN0001:00 from ACPI There is nothing we can do about the first -EBUSY error being logged, but the second error does not really add any new information, so lets drop it. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-03Linux 5.11-rc2Linus Torvalds1-1/+1
2021-01-02Merge tag 's390-5.11-3' of ↵Linus Torvalds4-21/+35
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 cleanups from Vasily Gorbik: "Update defconfigs and sort config select list" * tag 's390-5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/Kconfig: sort config S390 select list once again s390: update defconfigs
2021-01-02Merge tag 'pm-5.11-rc2' of ↵Linus Torvalds4-5/+48
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix a crash in intel_pstate during resume from suspend-to-RAM that may occur after recent changes and two resource leaks in error paths in the operating performance points (OPP) framework, add a new C-states table to intel_idle and update the cpuidle MAINTAINERS entry to cover the governors too. Specifics: - Fix recently introduced crash in the intel_pstate driver that occurs if scale-invariance is disabled during resume from suspend-to-RAM due to inconsistent changes of APERF or MPERF MSR values made by the platform firmware (Rafael Wysocki). - Fix a memory leak and add a missing clk_put() in error paths in the OPP framework (Quanyang Wang, Viresh Kumar). - Add new C-states table for SnowRidge processors to the intel_idle driver (Artem Bityutskiy). - Update the MAINTAINERS entry for cpuidle to make it clear that the governors are covered by it too (Lukas Bulwahn)" * tag 'pm-5.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: intel_idle: add SnowRidge C-state table cpufreq: intel_pstate: Fix fast-switch fallback path opp: Call the missing clk_put() on error opp: fix memory leak in _allocate_opp_table MAINTAINERS: include governors into CPU IDLE TIME MANAGEMENT FRAMEWORK
2021-01-02Merge branches 'pm-cpufreq' and 'pm-cpuidle'Rafael J. Wysocki3-3/+41
* pm-cpufreq: cpufreq: intel_pstate: Fix fast-switch fallback path * pm-cpuidle: intel_idle: add SnowRidge C-state table MAINTAINERS: include governors into CPU IDLE TIME MANAGEMENT FRAMEWORK
2021-01-01Merge tag 'scsi-fixes' of ↵Linus Torvalds21-86/+208
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is a load of driver fixes (12 ufs, 1 mpt3sas, 1 cxgbi). The big core two fixes are for power management ("block: Do not accept any requests while suspended" and "block: Fix a race in the runtime power management code") which finally sorts out the resume problems we've occasionally been having. To make the resume fix, there are seven necessary precursors which effectively renames REQ_PREEMPT to REQ_PM, so every "special" request in block is automatically a power management exempt one. All of the non-PM preempt cases are removed except for the one in the SCSI Parallel Interface (spi) domain validation which is a genuine case where we have to run requests at high priority to validate the bus so this becomes an autopm get/put protected request" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (22 commits) scsi: cxgb4i: Fix TLS dependency scsi: ufs: Un-inline ufshcd_vops_device_reset function scsi: ufs: Re-enable WriteBooster after device reset scsi: ufs-mediatek: Use correct path to fix compile error scsi: mpt3sas: Signedness bug in _base_get_diag_triggers() scsi: block: Do not accept any requests while suspended scsi: block: Remove RQF_PREEMPT and BLK_MQ_REQ_PREEMPT scsi: core: Only process PM requests if rpm_status != RPM_ACTIVE scsi: scsi_transport_spi: Set RQF_PM for domain validation commands scsi: ide: Mark power management requests with RQF_PM instead of RQF_PREEMPT scsi: ide: Do not set the RQF_PREEMPT flag for sense requests scsi: block: Introduce BLK_MQ_REQ_PM scsi: block: Fix a race in the runtime power management code scsi: ufs-pci: Enable UFSHCD_CAP_RPM_AUTOSUSPEND for Intel controllers scsi: ufs-pci: Fix recovery from hibernate exit errors for Intel controllers scsi: ufs-pci: Ensure UFS device is in PowerDown mode for suspend-to-disk ->poweroff() scsi: ufs-pci: Fix restore from S4 for Intel controllers scsi: ufs-mediatek: Keep VCC always-on for specific devices scsi: ufs: Allow regulators being always-on scsi: ufs: Clear UAC for RPMB after ufshcd resets ...
2021-01-01Merge tag 'block-5.11-2021-01-01' of git://git.kernel.dk/linux-blockLinus Torvalds2-1/+2
Pull block fixes from Jens Axboe: "Two minor block fixes from this last week that should go into 5.11: - Add missing NOWAIT debugfs definition (Andres) - Fix kerneldoc warning introduced this merge window (Randy)" * tag 'block-5.11-2021-01-01' of git://git.kernel.dk/linux-block: block: add debugfs stanza for QUEUE_FLAG_NOWAIT fs: block_dev.c: fix kernel-doc warnings from struct block_device changes
2021-01-01Merge tag 'io_uring-5.11-2021-01-01' of git://git.kernel.dk/linux-blockLinus Torvalds3-21/+43
Pull io_uring fixes from Jens Axboe: "A few fixes that should go into 5.11, all marked for stable as well: - Fix issue around identity COW'ing and users that share a ring across processes - Fix a hang associated with unregistering fixed files (Pavel) - Move the 'process is exiting' cancelation a bit earlier, so task_works aren't affected by it (Pavel)" * tag 'io_uring-5.11-2021-01-01' of git://git.kernel.dk/linux-block: kernel/io_uring: cancel io_uring before task works io_uring: fix io_sqe_files_unregister() hangs io_uring: add a helper for setting a ref node io_uring: don't assume mm is constant across submits
2021-01-01depmod: handle the case of /sbin/depmod without /sbin in PATHLinus Torvalds1-0/+2
Commit 436e980e2ed5 ("kbuild: don't hardcode depmod path") stopped hard-coding the path of depmod, but in the process caused trouble for distributions that had that /sbin location, but didn't have it in the PATH (generally because /sbin is limited to the super-user path). Work around it for now by just adding /sbin to the end of PATH in the depmod.sh script. Reported-and-tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-30kernel/io_uring: cancel io_uring before task worksPavel Begunkov2-2/+2
For cancelling io_uring requests it needs either to be able to run currently enqueued task_works or having it shut down by that moment. Otherwise io_uring_cancel_files() may be waiting for requests that won't ever complete. Go with the first way and do cancellations before setting PF_EXITING and so before putting the task_work infrastructure into a transition state where task_work_run() would better not be called. Cc: stable@vger.kernel.org # 5.5+ Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-30io_uring: fix io_sqe_files_unregister() hangsPavel Begunkov1-2/+22
io_sqe_files_unregister() uninterruptibly waits for enqueued ref nodes, however requests keeping them may never complete, e.g. because of some userspace dependency. Make sure it's interruptible otherwise it would hang forever. Cc: stable@vger.kernel.org # 5.6+ Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-30io_uring: add a helper for setting a ref nodePavel Begunkov1-10/+12
Setting a new reference node to a file data is not trivial, don't repeat it, add and use a helper. Cc: stable@vger.kernel.org # 5.6+ Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-30Merge tag 'ceph-for-5.11-rc2' of git://github.com/ceph/ceph-clientLinus Torvalds3-36/+36
Pull ceph fixes from Ilya Dryomov: "A fix for an edge case in MClientRequest encoding and a couple of trivial fixups for the new msgr2 support" * tag 'ceph-for-5.11-rc2' of git://github.com/ceph/ceph-client: libceph: add __maybe_unused to DEFINE_MSGR2_FEATURE libceph: align session_key and con_secret to 16 bytes libceph: fix auth_signature buffer allocation in secure mode ceph: reencode gid_list when reconnecting
2020-12-30intel_idle: add SnowRidge C-state tableArtem Bityutskiy1-1/+40
Add C-state table for the SnowRidge SoC which is found on Intel Jacobsville platforms. The following has been changed. 1. C1E latency changed from 10us to 15us. It was measured using the open source "wult" tool (the "nic" method, 15us is the 99.99th percentile). 2. C1E power break even changed from 20us to 25us, which may result in less C1E residency in some workloads. 3. C6 latency changed from 50us to 130us. Measured the same way as C1E. The C6 C-state is supported only by some SnowRidge revisions, so add a C-state table commentary about this. On SnowRidge, C6 support is enumerated via the usual mechanism: "mwait" leaf of the "cpuid" instruction. The 'intel_idle' driver does check this leaf, so even though C6 is present in the table, the driver will only use it if the CPU does support it. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-12-30cpufreq: intel_pstate: Fix fast-switch fallback pathRafael J. Wysocki1-1/+0
When sugov_update_single_perf() falls back to the "frequency" path due to the missing scale-invariance, it will call cpufreq_driver_fast_switch() via sugov_fast_switch() and the driver's ->fast_switch() callback will be invoked, so it must not be NULL. However, after commit a365ab6b9dfb ("cpufreq: intel_pstate: Implement the ->adjust_perf() callback") intel_pstate sets ->fast_switch() to NULL when it is going to use intel_cpufreq_adjust_perf(), which is a mistake, because on x86 the scale-invariance may be turned off dynamically, so modify it to retain the original ->adjust_perf() callback pointer. Fixes: a365ab6b9dfb ("cpufreq: intel_pstate: Implement the ->adjust_perf() callback") Reported-by: Kenneth R. Crudup <kenny@panix.com> Tested-by: Kenneth R. Crudup <kenny@panix.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-12-30Merge branch 'opp/linux-next' of ↵Rafael J. Wysocki1-2/+7
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull operating performance points (OPP) framework fixes for 5.11-rc2 from Viresh Kumar: "This contains two patches to fix freeing of resources in error paths." * 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: opp: Call the missing clk_put() on error opp: fix memory leak in _allocate_opp_table
2020-12-30s390/Kconfig: sort config S390 select list once againHeiko Carstens1-14/+17
...and add comments at the top and bottom. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-12-30s390: update defconfigsHeiko Carstens3-7/+18
Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-12-29block: add debugfs stanza for QUEUE_FLAG_NOWAITAndres Freund1-0/+1
This was missed in 021a24460dc2. Leads to the numeric value of QUEUE_FLAG_NOWAIT (i.e. 29) showing up in /sys/kernel/debug/block/*/state. Fixes: 021a24460dc28e7412aecfae89f60e1847e685c0 Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andres Freund <andres@anarazel.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-29fs: block_dev.c: fix kernel-doc warnings from struct block_device changesRandy Dunlap1-1/+1
Fix new kernel-doc warnings in fs/block_dev.c: ../fs/block_dev.c:1066: warning: Excess function parameter 'whole' description in 'bd_abort_claiming' ../fs/block_dev.c:1837: warning: Function parameter or member 'dev' not described in 'lookup_bdev' Fixes: 4e7b5671c6a8 ("block: remove i_bdev") Fixes: 37c3fc9abb25 ("block: simplify the block device claiming interface") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Christoph Hellwig <hch@lst.de> Cc: linux-fsdevel@vger.kernel.org Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-29Merge branch 'akpm' (patches from Andrew)Linus Torvalds42-91/+101
Merge misc fixes from Andrew Morton: "16 patches Subsystems affected by this patch series: mm (selftests, hugetlb, pagecache, mremap, kasan, and slub), kbuild, checkpatch, misc, and lib" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm: slub: call account_slab_page() after slab page initialization zlib: move EXPORT_SYMBOL() and MODULE_LICENSE() out of dfltcc_syms.c lib/zlib: fix inflating zlib streams on s390 lib/genalloc: fix the overflow when size is too big kdev_t: always inline major/minor helper functions sizes.h: add SZ_8G/SZ_16G/SZ_32G macros local64.h: make <asm/local64.h> mandatory kasan: fix null pointer dereference in kasan_record_aux_stack mm: generalise COW SMC TLB flushing race comment mm/mremap.c: fix extent calculation mm: memmap defer init doesn't work as expected mm: add prototype for __add_to_page_cache_locked() checkpatch: prefer strscpy to strlcpy Revert "kbuild: avoid static_assert for genksyms" mm/hugetlb: fix deadlock in hugetlb_cow error path selftests/vm: fix building protection keys test
2020-12-29mm: slub: call account_slab_page() after slab page initializationRoman Gushchin1-3/+2
It's convenient to have page->objects initialized before calling into account_slab_page(). In particular, this information can be used to pre-alloc the obj_cgroup vector. Let's call account_slab_page() a bit later, after the initialization of page->objects. This commit doesn't bring any functional change, but is required for further optimizations. [akpm@linux-foundation.org: undo changes needed by forthcoming mm-memcg-slab-pre-allocate-obj_cgroups-for-slab-caches-with-slab_account.patch] Link: https://lkml.kernel.org/r/20201110195753.530157-1-guro@fb.com Signed-off-by: Roman Gushchin <guro@fb.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Christoph Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-29zlib: move EXPORT_SYMBOL() and MODULE_LICENSE() out of dfltcc_syms.cRandy Dunlap4-19/+9
In commit 11fb479ff5d9 ("zlib: export S390 symbols for zlib modules"), I added EXPORT_SYMBOL()s to dfltcc_inflate.c but then Mikhail said that these should probably be in dfltcc_syms.c with the other EXPORT_SYMBOL()s. However, that is contrary to the current kernel style, which places EXPORT_SYMBOL() immediately after the function that it applies to, so move all EXPORT_SYMBOL()s to their respective function locations and drop the dfltcc_syms.c file. Also move MODULE_LICENSE() from the deleted file to dfltcc.c. [rdunlap@infradead.org: remove dfltcc_syms.o from Makefile] Link: https://lkml.kernel.org/r/20201227171837.15492-1-rdunlap@infradead.org Link: https://lkml.kernel.org/r/20201219052530.28461-1-rdunlap@infradead.org Fixes: 11fb479ff5d9 ("zlib: export S390 symbols for zlib modules") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Zaslonko Mikhail <zaslonko@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-29lib/zlib: fix inflating zlib streams on s390Ilya Leoshkevich1-2/+2
Decompressing zlib streams on s390 fails with "incorrect data check" error. Userspace zlib checks inflate_state.flags in order to byteswap checksums only for zlib streams, and s390 hardware inflate code, which was ported from there, tries to match this behavior. At the same time, kernel zlib does not use inflate_state.flags, so it contains essentially random values. For many use cases either zlib stream is zeroed out or checksum is not used, so this problem is masked, but at least SquashFS is still affected. Fix by always passing a checksum to and from the hardware as is, which matches zlib_inflate()'s expectations. Link: https://lkml.kernel.org/r/20201215155551.894884-1-iii@linux.ibm.com Fixes: 126196100063 ("lib/zlib: add s390 hardware support for kernel zlib_inflate") Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Mikhail Zaslonko <zaslonko@linux.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Mikhail Zaslonko <zaslonko@linux.ibm.com> Cc: <stable@vger.kernel.org> [5.6+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-29lib/genalloc: fix the overflow when size is too bigHuang Shijie1-12/+13
Some graphic card has very big memory on chip, such as 32G bytes. In the following case, it will cause overflow: pool = gen_pool_create(PAGE_SHIFT, NUMA_NO_NODE); ret = gen_pool_add(pool, 0x1000000, SZ_32G, NUMA_NO_NODE); va = gen_pool_alloc(pool, SZ_4G); The overflow occurs in gen_pool_alloc_algo_owner(): .... size = nbits << order; .... The @nbits is "int" type, so it will overflow. Then the gen_pool_avail() will return the wrong value. This patch converts some "int" to "unsigned long", and changes the compare code in while. Link: https://lkml.kernel.org/r/20201229060657.3389-1-sjhuang@iluvatar.ai Signed-off-by: Huang Shijie <sjhuang@iluvatar.ai> Reported-by: Shi Jiasheng <jiasheng.shi@iluvatar.ai> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-29kdev_t: always inline major/minor helper functionsJosh Poimboeuf1-11/+11
Silly GCC doesn't always inline these trivial functions. Fixes the following warning: arch/x86/kernel/sys_ia32.o: warning: objtool: cp_stat64()+0xd8: call to new_encode_dev() with UACCESS enabled Link: https://lkml.kernel.org/r/984353b44a4484d86ba9f73884b7306232e25e30.1608737428.git.jpoimboe@redhat.com Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> [build-tested] Cc: Peter Zijlstra <peterz@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-29sizes.h: add SZ_8G/SZ_16G/SZ_32G macrosHuang Shijie1-0/+3
Add these macros, since we can use them in drivers. Link: https://lkml.kernel.org/r/20201229072819.11183-1-sjhuang@iluvatar.ai Signed-off-by: Huang Shijie <sjhuang@iluvatar.ai> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-29local64.h: make <asm/local64.h> mandatoryRandy Dunlap22-21/+1
Make <asm-generic/local64.h> mandatory in include/asm-generic/Kbuild and remove all arch/*/include/asm/local64.h arch-specific files since they only #include <asm-generic/local64.h>. This fixes build errors on arch/c6x/ and arch/nios2/ for block/blk-iocost.c. Build-tested on 21 of 25 arch-es. (tools problems on the others) Yes, we could even rename <asm-generic/local64.h> to <linux/local64.h> and change all #includes to use <linux/local64.h> instead. Link: https://lkml.kernel.org/r/20201227024446.17018-1-rdunlap@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Suggested-by: Christoph Hellwig <hch@infradead.org> Reviewed-by: Masahiro Yamada <masahiroy@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Aurelien Jacquiot <jacquiot.aurelien@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-29kasan: fix null pointer dereference in kasan_record_aux_stackWalter Wu1-0/+2
Syzbot reported the following [1]: BUG: kernel NULL pointer dereference, address: 0000000000000008 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 2d993067 P4D 2d993067 PUD 19a3c067 PMD 0 Oops: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 3852 Comm: kworker/1:2 Not tainted 5.10.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: events free_ipc RIP: 0010:kasan_record_aux_stack+0x77/0xb0 Add null checking slab object from kasan_get_alloc_meta() in order to avoid null pointer dereference. [1] https://syzkaller.appspot.com/x/log.txt?x=10a82a50d00000 Link: https://lkml.kernel.org/r/20201228080018.23041-1-walter-zh.wu@mediatek.com Signed-off-by: Walter Wu <walter-zh.wu@mediatek.com> Suggested-by: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-29mm: generalise COW SMC TLB flushing race commentNicholas Piggin1-3/+5
I'm not sure if I'm completely missing something here, but AFAIKS the reference to the mysterious "COW SMC race" confuses the issue. The original changelog and mailing list thread didn't help me either. This SMC race is where the problem was detected, but isn't the general problem bigger and more obvious: that the new PTE could be picked up at any time by any TLB while entries for the old PTE exist in other TLBs before the TLB flush takes effect? The case where the iTLB and dTLB of a CPU are pointing at different pages is an interesting one but follows from the general problem. The other (minor) thing with the comment I think it makes it a bit clearer to say what the old code was doing (i.e., it avoids the race as opposed to what?). References: 4ce072f1faf29 ("mm: fix a race condition under SMC + COW") Link: https://lkml.kernel.org/r/20201215121119.351650-1-npiggin@gmail.com Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Suresh Siddha <sbsiddha@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-29mm/mremap.c: fix extent calculationKalesh Singh1-1/+3
When `next < old_addr`, `next - old_addr` arithmetic underflows causing `extent` to be incorrect. Make `extent` the smaller of `next - old_addr` or `old_end - old_addr`. Link: https://lkml.kernel.org/r/20201219170433.2418867-1-kaleshsingh@google.com Fixes: c49dd34018026 ("mm: speedup mremap on 1GB or larger regions") Signed-off-by: Kalesh Singh <kaleshsingh@google.com> Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Helge Deller <deller@gmx.de> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Powered by cgit, Gruvboxed by Blaster4385.