| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
On DG2, capturing OA reports while running heavy render workloads
sometimes results in invalid OA reports where 64-byte chunks inside
reports have stale values. Under memory pressure, high OA sampling rates
(13.3 us) and heavy render workload, occasionally, the OA HW TAIL
pointer does not progress as fast as the sampling rate. When these
glitches occur, the TAIL pointer takes approx. 200us to progress. While
this is expected behavior from the HW perspective, invalid reports are
not expected.
In oa_buffer_check_unlocked(), when we execute the if condition, we are
updating the oa_buffer.tail to the aging tail and then setting pollin
based on this tail value, however, we do not have a chance to rewind and
validate the reports prior to setting pollin. The validation happens
in a subsequent call to oa_buffer_check_unlocked(). If a read occurs
before this validation, then we end up reading reports up until this
oa_buffer.tail value which includes invalid reports. Though found on
DG2, this affects all platforms.
The aging tail logic is no longer necessary since we are explicitly
checking for landed reports.
Start by dropping the aging tail logic.
v2:
- Drop extra blank line
- Add reason to drop aging logic (Ashutosh)
- Add bug links (Ashutosh)
- rename aged_tail to read_tail
- Squash patches 3 and 1
v3: (Ashutosh)
- Remove extra spaces
- Remove gtt_offset from the pollin calculation
- s/Bug:/Link/ in commit message (checkpatch)
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7484
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7757
Signed-off-by: Umesh Nerlige Ramappa <[email protected]>
Reviewed-by: Ashutosh Dixit <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
To comply with the design that buffer objects shall have immutable
cache setting through out their life cycle, {set, get}_caching ioctl's
are no longer supported from MTL onward. With that change caching
policy can only be set at object creation time. The current code
applies a default (platform dependent) cache setting for all objects.
However this is not optimal for performance tuning. The patch extends
the existing gem_create uAPI to let user set PAT index for the object
at creation time.
The new extension is platform independent, so UMD's can switch to using
this extension for older platforms as well, while {set, get}_caching are
still supported on these legacy paltforms for compatibility reason.
However, since PAT index was not clearly defined for platforms prior to
GEN12 (TGL), so we are limiting this externsion to GEN12+ platforms
only. See ext_set_pat() in for the implementation details.
The documentation related to the PAT/MOCS tables is currently available
for Tiger Lake here:
https://www.intel.com/content/www/us/en/docs/graphics-for-linux/developer-reference/1-0/tiger-lake.html
The documentation for other platforms is currently being updated.
BSpec: 45101
Mesa support has been submitted in this merge request:
https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22878
The media driver supprt has bin submitted in this merge request:
https://github.com/intel/media-driver/pull/1680
The IGT test related to this change is
igt@gem_create@create-ext-set-pat
Signed-off-by: Fei Yang <[email protected]>
Cc: Chris Wilson <[email protected]>
Cc: Matt Roper <[email protected]>
Cc: Andi Shyti <[email protected]>
Reviewed-by: Andi Shyti <[email protected]>
Acked-by: Jordan Justen <[email protected]>
Tested-by: Jordan Justen <[email protected]>
Acked-by: Carl Zhang <[email protected]>
Tested-by: Lihao Gu <[email protected]>
Signed-off-by: Andi Shyti <[email protected]>
Acked-by: Tvrtko Ursulin <[email protected]>
Acked-by: Slawomir Milczarek <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
There were a bunch of defines and structures left over from an API
update a very long time ago. Remove them.
Signed-off-by: John Harrison <[email protected]>
Reviewed-by: Andi Shyti <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
_GTS as an abbreviation here leads to some confusion, match other
definitions and drop the s.
Cc: Matt Roper <[email protected]>
Cc: Ashutosh Dixit <[email protected]>
Cc: Andi Shyti <[email protected]>
Cc: Tvrtko Ursulin <[email protected]>
Cc: Umesh Nerlige Ramappa <[email protected]>
Signed-off-by: Matt Atwood <[email protected]>
Reviewed-by: Matt Roper <[email protected]>
Signed-off-by: Matt Roper <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
According to Ashutosh there is no current or planned product in i915 for
I915_MAX_GT to be 4 anymore.
Cc: Matt Roper <[email protected]>
Cc: Ashutosh Dixit <[email protected]>
Cc: Andi Shyti <[email protected]>
Cc: Tvrtko Ursulin <[email protected]>
Cc: Umesh Nerlige Ramappa <[email protected]>
Signed-off-by: Matt Atwood <[email protected]>
Reviewed-by: Matt Roper <[email protected]>
Reviewed-by: Ashutosh Dixit <[email protected]>
Signed-off-by: Matt Roper <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Add some missing error propagation in live_parallel_switch.
To avoid needlessly burdening the various backport processes, note I am
not marking it as a fix against any patches and not copying stable since
it is debug/selftests only code.
Signed-off-by: Tvrtko Ursulin <[email protected]>
Reported-by: Dan Carpenter <[email protected]>
Cc: Andi Shyti <[email protected]>
Reviewed-by: Andi Shyti <[email protected]>
Fixes: 50d16d44cce4 ("drm/i915/selftests: Exercise context switching in parallel")
Fixes: 6407cf533217 ("drm/i915/selftests: Stop using kthread_stop()")
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Use the common fdinfo helper for printing the basics. Remove now unused
client id allocation code.
Signed-off-by: Tvrtko Ursulin <[email protected]>
Cc: Rob Clark <[email protected]>
Reviewed-by: Andi Shyti <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Follow the same logic as DG2, so just a meu binary with no version number.
Signed-off-by: Daniele Ceraolo Spurio <[email protected]>
Cc: Alan Previn <[email protected]>
Reviewed-by: John Harrison <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
On MTL, for obvious reasons, HuC is only available on the media tile.
We already disable SW support for HuC on the root gt due to the
absence of VCS engines, but we also need to update the getparam to point
to the HuC struct in the media GT.
Signed-off-by: Daniele Ceraolo Spurio <[email protected]>
Cc: John Harrison <[email protected]>
Reviewed-by: John Harrison <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The full authentication via the GSC requires an heci packet submission
to the GSC FW via the GSC CS. The GSC has new PXP command for this
(literally called NEW_HUC_AUTH).
The intel_huc_auth function is also updated to handle both authentication
types.
v2: check that the GuC auth for clear media has completed before
proceding with the full auth
v3: use a define for the object size (Alan)
Signed-off-by: Daniele Ceraolo Spurio <[email protected]>
Cc: Alan Previn <[email protected]>
Reviewed-by: Alan Previn <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Before we add the second step of the MTL HuC auth (via GSC), we need to
have the ability to differentiate between them. To do so, the huc
authentication check is duplicated for GuC and GSC auth, with
GSC-enabled binaries being considered fully authenticated only after
the GSC auth step.
To report the difference between the 2 auth steps, a new case is added
to the HuC getparam. This way, the clear media driver can start
submitting before full auth, as partial auth is enough for those
workloads.
v2: fix authentication status check for DG2
v3: add a better comment at the top of the HuC file to explain the
different approaches to load and auth (John)
v4: update call to intel_huc_is_authenticated in the pxp code to check
for GSC authentication
v5: drop references to meu and esclamation mark in huc_auth print (John)
Signed-off-by: Daniele Ceraolo Spurio <[email protected]>
Cc: Alan Previn <[email protected]>
Cc: John Harrison <[email protected]>
Reviewed-by: Alan Previn <[email protected]> #v2
Reviewed-by: John Harrison <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
In the previous patch we extracted the offset of the legacy-style HuC
binary located within the GSC-enabled blob, so now we can use that to
load the HuC via DMA if the fuse is set that way.
Note that we now need to differentiate between "GSC-enabled binary" and
"loaded by GSC", so the former case has been renamed to "has GSC headers"
for clarity, while the latter is now based on the fuse instead of the
binary format. This way, all the legacy load paths are automatically
taken (including the auth by GuC) without having to implement further
code changes.
v2: s/is_meu_binary/has_gsc_headers/, clearer logs (John)
v3: split check for GSC access, better comments (John)
Signed-off-by: Daniele Ceraolo Spurio <[email protected]>
Cc: Alan Previn <[email protected]>
Cc: John Harrison <[email protected]>
Reviewed-by: John Harrison <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The new binaries that support the 2-step authentication contain the
legacy-style binary, which we can use for loading the HuC via DMA. To
find out where this is located in the image, we need to parse the
manifest of the GSC-enabled HuC binary. The manifest consist of a
partition header followed by entries, one of which contains the offset
we're looking for.
Note that the DG2 GSC binary contains entries with the same names, but
it doesn't contain a full legacy binary, so we need to skip assigning
the dma offset in that case (which we can do by checking the ccs).
Also, since we're now parsing the entries, we can extract the HuC
version that way instead of using hardcoded offsets.
Note that the GSC binary uses the same structures in its binary header,
so they've been added in their own header file.
v2: fix structure names to match meu defines (s/CPT/CPD/), update commit
message, check ccs validity, drop old version location defines.
v3: drop references to the MEU tool to reduce confusion, fix log (John)
v4: fix log for real (John)
Signed-off-by: Daniele Ceraolo Spurio <[email protected]>
Cc: Alan Previn <[email protected]>
Cc: John Harrison <[email protected]>
Reviewed-by: Alan Previn <[email protected]> #v2
Reviewed-by: John Harrison <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Now that each FW has its own reserved area, we can keep them always
pinned and skip the pin/unpin dance on reset. This will make things
easier for the 2-step HuC authentication, which requires the FW to be
pinned in GGTT after the xfer is completed.
Since the vma is now valid for a long time and not just for the quick
pin-load-unpin dance, the name "dummy" is no longer appropriare and has
been replaced with vma_res. All the functions have also been updated to
operate on vma_res for consistency.
Given that we pin the vma behind the allocator's back (which is ok
because we do the pinning in an area that was previously reserved for
thus purpose), we do need to explicitly re-pin on resume because the
automated helper won't cover us.
v2: better comments and commit message, s/dummy/vma_res/
Signed-off-by: Daniele Ceraolo Spurio <[email protected]>
Cc: Alan Previn <[email protected]>
Cc: John Harrison <[email protected]>
Reviewed-by: John Harrison <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
For conflict avoidance we need the following commit:
c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers
Signed-off-by: Tvrtko Ursulin <[email protected]>
|
|
For mtl, workaround suggests that, SW insert a
dummy PIPE_CONTROL prior to PIPE_CONTROL which
contains a post sync: Timestamp or Write Immediate.
Bspec: 72197
V5:
- Remove ret variable - Andi
V4:
- Update commit message, avoid returing cs - Andi/Matt
V3:
- Wrap dummy pipe control stuff in API - Andi
V2:
- Fix kernel test robot warnings
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Signed-off-by: Tejas Upadhyay <[email protected]>
Reviewed-by: Andi Shyti <[email protected]>
Reviewed-by: Andrzej Hajda <[email protected]>
Signed-off-by: Andi Shyti <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
When building ARCH=i386 allmodconfig, the following warning occurs:
In file included from include/linux/device.h:15,
from include/linux/node.h:18,
from include/linux/cpu.h:17,
from include/linux/static_call.h:135,
from arch/x86/include/asm/perf_event.h:5,
from include/linux/perf_event.h:25,
from drivers/gpu/drm/i915/i915_pmu.h:11,
from drivers/gpu/drm/i915/gt/intel_engine_types.h:21,
from drivers/gpu/drm/i915/gt/intel_context_types.h:18,
from drivers/gpu/drm/i915/gem/i915_gem_context_types.h:20,
from drivers/gpu/drm/i915/i915_request.h:34,
from drivers/gpu/drm/i915/i915_active.h:13,
from drivers/gpu/drm/i915/gt/intel_context.h:13,
from drivers/gpu/drm/i915/pxp/intel_pxp_gsccs.c:8:
drivers/gpu/drm/i915/pxp/intel_pxp_gsccs.c: In function 'gsccs_send_message':
include/drm/drm_print.h:456:39: error: format '%ld' expects argument of type 'long int', but argument 4 has type 'size_t' {aka 'unsigned int'} [-Werror=format=]
456 | dev_##level##type((drm)->dev, "[drm] " fmt, ##__VA_ARGS__)
| ^~~~~~~~
include/linux/dev_printk.h:110:30: note: in definition of macro 'dev_printk_index_wrap'
110 | _p_func(dev, fmt, ##__VA_ARGS__); \
| ^~~
include/linux/dev_printk.h:146:61: note: in expansion of macro 'dev_fmt'
146 | dev_printk_index_wrap(_dev_warn, KERN_WARNING, dev, dev_fmt(fmt), ##__VA_ARGS__)
| ^~~~~~~
include/drm/drm_print.h:456:9: note: in expansion of macro 'dev_warn'
456 | dev_##level##type((drm)->dev, "[drm] " fmt, ##__VA_ARGS__)
| ^~~~
include/drm/drm_print.h:466:9: note: in expansion of macro '__drm_printk'
466 | __drm_printk((drm), warn,, fmt, ##__VA_ARGS__)
| ^~~~~~~~~~~~
drivers/gpu/drm/i915/pxp/intel_pxp_gsccs.c:146:17: note: in expansion of macro 'drm_warn'
146 | drm_warn(&i915->drm, "caller with insufficient PXP reply size %u (%ld)\n",
| ^~~~~~~~
cc1: all warnings being treated as errors
Use the '%zu' format specifier, as the variable is a 'size_t'.
Fixes: dc9ac125d81f ("drm/i915/pxp: Add GSC-CS backend to send GSC fw messages")
Signed-off-by: Nathan Chancellor <[email protected]>
Reviewed-by: Andi Shyti <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
In case system is short on mappable memory (256MB on SmallBar) allocation
of two 1GB buffers will fail.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8300
Signed-off-by: Andrzej Hajda <[email protected]>
Reviewed-by: Andi Shyti <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.5:
UAPI Changes:
Cross-subsystem Changes:
* fbdev:
* Add Kconfig options and initializer macros for file I/O, convert
DRM fbdev emulation
Core Changes:
* Unify handling of struct file_operations.show_fdinfo
* Use .probe in all i2c code (interface cleanup)
* TTM:
* Remove unused code
Driver Changes:
* amdgpu:
* Use shared show_fdinfo code
* Fix building without procfs
* bridge:
* display-conenctor: Add support for external power supply
* samsung-dsim: Fix enabling; Support variable clocking
* tc358767: Fixes
* ti-sn65dsi83: Fix enabling
* msm:
* Use shared show_fdinfo code
* msxfb:
* Add support for i.MX93 LCDIF
* panel:
* Add support for Ampire AM-800480L1TMQW-T00H plus DT bindings
* panel-edp: Convert .remove to return void
* stm:
* dsi: Use devm_ helper
* ltdc: Fix potential invalid pointer deref
Signed-off-by: Dave Airlie <[email protected]>
From: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20230601112246.GA10882@linux-uq9g
|
|
When building with clang's -Wincompatible-function-pointer-types-strict,
the following warnings occur:
drivers/gpu/drm/i915/gt/intel_ggtt_gmch.c:102:23: error: incompatible function pointer types assigning to 'void (*)(struct i915_address_space *, dma_addr_t, u64, unsigned int, u32)' (aka 'void (*)(struct i915_address_space *, unsigned int, unsigned long long, unsigned int, unsigned int)') from 'void (struct i915_address_space *, dma_addr_t, u64, enum i915_cache_level, u32)' (aka 'void (struct i915_address_space *, unsigned int, unsigned long long, enum i915_cache_level, unsigned int)') [-Werror,-Wincompatible-function-pointer-types-strict]
ggtt->vm.insert_page = gmch_ggtt_insert_page;
^ ~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/i915/gt/intel_ggtt_gmch.c:103:26: error: incompatible function pointer types assigning to 'void (*)(struct i915_address_space *, struct i915_vma_resource *, unsigned int, u32)' (aka 'void (*)(struct i915_address_space *, struct i915_vma_resource *, unsigned int, unsigned int)') from 'void (struct i915_address_space *, struct i915_vma_resource *, enum i915_cache_level, u32)' (aka 'void (struct i915_address_space *, struct i915_vma_resource *, enum i915_cache_level, unsigned int)') [-Werror, -Wincompatible-function-pointer-types-strict]
ggtt->vm.insert_entries = gmch_ggtt_insert_entries;
^ ~~~~~~~~~~~~~~~~~~~~~~~~
2 errors generated.
The warning is pointing out that while 'enum i915_cache_level' and
'unsigned int' are ABI compatible, these indirect calls will fail
clang's kernel Control Flow Integrity (kCFI) checks, as the callback's
signature does not exactly match the prototype's signature.
To fix this, replace the cache_level parameter with pat_index, as was
done in other places within i915 where there is no difference between
cache_level and pat_index on certain generations.
Fixes: 9275277d5324 ("drm/i915: use pat_index instead of cache_level")
Signed-off-by: Nathan Chancellor <[email protected]>
Reviewed-by: Andi Shyti <[email protected]>
Reviewed-by: Fei Yang <[email protected]>
Signed-off-by: Andi Shyti <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20230530-i915-gt-cache_level-wincompatible-function-pointer-types-strict-v1-2-54501d598229@kernel.org
|
|
When booting a kernel compiled with CONFIG_CFI_CLANG (kCFI), there is a
CFI failure in ggtt_probe_common() when trying to call hsw_pte_encode()
via an indirect call:
[ 5.030027] CFI failure at ggtt_probe_common+0xd1/0x130 [i915] (target: hsw_pte_encode+0x0/0x30 [i915]; expected type: 0xf5c1d0fc)
With kCFI, indirect calls are validated against their expected type
versus actual type and failures occur when the two types do not match.
clang's -Wincompatible-function-pointer-types-strict can catch this at
compile time but it is not enabled for the kernel yet:
drivers/gpu/drm/i915/gt/intel_ggtt.c:1155:23: error: incompatible function pointer types assigning to 'u64 (*)(dma_addr_t, unsigned int, u32)' (aka 'unsigned long long (*)(unsigned int, unsigned int, unsigned int)') from 'u64 (dma_addr_t,
enum i915_cache_level, u32)' (aka 'unsigned long long (unsigned int, enum i915_cache_level, unsigned int)') [-Werror,-Wincompatible-function-pointer-types-strict]
ggtt->vm.pte_encode = iris_pte_encode;
^ ~~~~~~~~~~~~~~~
drivers/gpu/drm/i915/gt/intel_ggtt.c:1157:23: error: incompatible function pointer types assigning to 'u64 (*)(dma_addr_t, unsigned int, u32)' (aka 'unsigned long long (*)(unsigned int, unsigned int, unsigned int)') from 'u64 (dma_addr_t,
enum i915_cache_level, u32)' (aka 'unsigned long long (unsigned int, enum i915_cache_level, unsigned int)') [-Werror,-Wincompatible-function-pointer-types-strict]
ggtt->vm.pte_encode = hsw_pte_encode;
^ ~~~~~~~~~~~~~~
drivers/gpu/drm/i915/gt/intel_ggtt.c:1159:23: error: incompatible function pointer types assigning to 'u64 (*)(dma_addr_t, unsigned int, u32)' (aka 'unsigned long long (*)(unsigned int, unsigned int, unsigned int)') from 'u64 (dma_addr_t,
enum i915_cache_level, u32)' (aka 'unsigned long long (unsigned int, enum i915_cache_level, unsigned int)') [-Werror,-Wincompatible-function-pointer-types-strict]
ggtt->vm.pte_encode = byt_pte_encode;
^ ~~~~~~~~~~~~~~
drivers/gpu/drm/i915/gt/intel_ggtt.c:1161:23: error: incompatible function pointer types assigning to 'u64 (*)(dma_addr_t, unsigned int, u32)' (aka 'unsigned long long (*)(unsigned int, unsigned int, unsigned int)') from 'u64 (dma_addr_t,
enum i915_cache_level, u32)' (aka 'unsigned long long (unsigned int, enum i915_cache_level, unsigned int)') [-Werror,-Wincompatible-function-pointer-types-strict]
ggtt->vm.pte_encode = ivb_pte_encode;
^ ~~~~~~~~~~~~~~
drivers/gpu/drm/i915/gt/intel_ggtt.c:1163:23: error: incompatible function pointer types assigning to 'u64 (*)(dma_addr_t, unsigned int, u32)' (aka 'unsigned long long (*)(unsigned int, unsigned int, unsigned int)') from 'u64 (dma_addr_t,
enum i915_cache_level, u32)' (aka 'unsigned long long (unsigned int, enum i915_cache_level, unsigned int)') [-Werror,-Wincompatible-function-pointer-types-strict]
ggtt->vm.pte_encode = snb_pte_encode;
^ ~~~~~~~~~~~~~~
5 errors generated.
In this case, the pre-gen8 pte_encode functions have a second parameter
type of 'enum i915_cache_level' whereas the function pointer prototype
in 'struct i915_address_space' expects a second parameter type of
'unsigned int'.
Update the second parameter of the callbacks and the comment above them
noting that these statements are still valid, which matches other
functions and files, to clear up the kCFI failures at run time.
Fixes: 9275277d5324 ("drm/i915: use pat_index instead of cache_level")
Signed-off-by: Nathan Chancellor <[email protected]>
Reviewed-by: Andi Shyti <[email protected]>
Reviewed-by: Fei Yang <[email protected]>
Signed-off-by: Andi Shyti <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20230530-i915-gt-cache_level-wincompatible-function-pointer-types-strict-v1-1-54501d598229@kernel.org
|
|
kernel_context() returns an error pointer. Use pointer-error
conversion functions to evaluate its return value, rather than
checking for a '0' return.
Fixes: eb5c10cbbc2f ("drm/i915: Remove I915_USER_PRIORITY_SHIFT")
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Andi Shyti <[email protected]>
Cc: Chris Wilson <[email protected]>
Cc: <[email protected]> # v5.13+
Reviewed-by: Andrzej Hajda <[email protected]>
Acked-by: Tejas Upadhyay <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Implement dedicated fbdev helpers for framebuffer I/O instead
of using DRM's helpers. Use an fbdev generator macro for
deferred I/O to create the fbdev callbacks. i915 was the only
caller of the DRM helpers, so remove them from the helper module.
i915's fbdev emulation is still incomplete as it doesn't implement
deferred I/O and damage handling for mmaped pages.
v4:
* generate deferred-I/O helpers
* use initializer macros for fb_ops
v2:
* use FB_IO_HELPERS options
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Sam Ravnborg <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Joonas Lahtinen <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: Tvrtko Ursulin <[email protected]>
Cc: "Ville Syrjälä" <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Implement dedicated fbdev helpers for framebuffer I/O instead
of using DRM's helpers. Use an fbdev generator macro for
deferred I/O to create the callbacks. Fbdev-generic was the
only caller of the DRM helpers, so remove them from the helper
module.
v4:
* generate deferred-I/O helpers
* use initializer macros for fb_ops
v2:
* use FB_SYS_HELPERS_DEFERRED option
Signed-off-by: Thomas Zimmermann <[email protected]>
Tested-by: Sui Jingfeng <[email protected]>
Reviewed-by: Sui Jingfeng <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Use the regular fbdev helpers for framebuffer I/O instead of DRM's
helpers. Msm does not use damage handling, so DRM's fbdev helpers
are mere wrappers around the fbdev code.
By using fbdev helpers directly within each DRM fbdev emulation,
we can eventually remove DRM's wrapper functions entirely.
Msm's fbdev emulation has been incomplete as it didn't implement
damage handling. Partilly fix this by implementing damage handling
for write and draw operation. It is still missing for mmaped pages.
v4:
* use initializer macros for struct fb_ops
* partially support damage handling
v2:
* use FB_SYS_HELPERS option
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Acked-by: Sam Ravnborg <[email protected]>
Cc: Rob Clark <[email protected]>
Cc: Abhinav Kumar <[email protected]>
Cc: Dmitry Baryshkov <[email protected]>
Cc: Sean Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Export drm_fb_helper_damage() and drm_fb_helper_damage_range(), which
handle damage areas for fbdev emulation. This is a temporary export
that allows to move the DRM I/O helpers for fbdev into drivers. Only
fbdev-generic and i915 need them. Both will be updated to implement
damage handling by themselves and the exported functions will be removed.
v4:
* update interfaces
Signed-off-by: Thomas Zimmermann <[email protected]>
Acked-by: Sam Ravnborg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Use the regular fbdev helpers for framebuffer I/O instead of DRM's
helpers. Tegra does not use damage handling, so DRM's fbdev helpers
are mere wrappers around the fbdev code.
By using fbdev helpers directly within each DRM fbdev emulation,
we can eventually remove DRM's wrapper functions entirely.
v4:
* use initializer macros for struct fb_ops
v2:
* use FB_SYS_HELPERS option
Signed-off-by: Thomas Zimmermann <[email protected]>
Acked-by: Sam Ravnborg <[email protected]>
Cc: Thierry Reding <[email protected]>
Cc: Mikko Perttunen <[email protected]>
Cc: Jonathan Hunter <[email protected]>
Acked-by: Thierry Reding <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Use the regular fbdev helpers for framebuffer I/O instead of DRM's
helpers. Omapdrm does not use damage handling, so DRM's fbdev helpers
are mere wrappers around the fbdev code.
By using fbdev helpers directly within each DRM fbdev emulation,
we can eventually remove DRM's wrapper functions entirely.
v4:
* use initializer macros for struct fb_ops
v2:
* use FB_SYS_HELPERS option
Signed-off-by: Thomas Zimmermann <[email protected]>
Acked-by: Sam Ravnborg <[email protected]>
Cc: Tomi Valkeinen <[email protected]>
Reviewed-by: Tomi Valkeinen <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Use the regular fbdev helpers for framebuffer I/O instead of DRM's
helpers. Fbdev-dma does not use damage handling, so DRM's fbdev helpers
are mere wrappers around the fbdev code.
By using fbdev helpers directly within each DRM fbdev emulation,
we can eventually remove DRM's wrapper functions entirely.
v4:
* use initializer macros for struct fb_ops
v2:
* use FB_SYS_HELPERS option
Signed-off-by: Thomas Zimmermann <[email protected]>
Acked-by: Sam Ravnborg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Use the regular fbdev helpers for framebuffer I/O instead of DRM's
helpers. Radeon does not use damage handling, so DRM's fbdev helpers
are mere wrappers around the fbdev code.
By using fbdev helpers directly within each DRM fbdev emulation,
we can eventually remove DRM's wrapper functions entirely.
v4:
* use initializer macros for struct fb_ops
v2:
* use FB_IO_HELPERS option
Signed-off-by: Thomas Zimmermann <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Acked-by: Sam Ravnborg <[email protected]>
Cc: Alex Deucher <[email protected]>
Cc: "Christian König" <[email protected]>
Cc: "Pan, Xinhui" <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Use the regular fbdev helpers for framebuffer I/O instead of DRM's
helpers. Gma500 does not use damage handling, so DRM's fbdev helpers
are mere wrappers around the fbdev code.
By using fbdev helpers directly within each DRM fbdev emulation,
we can eventually remove DRM's wrapper functions entirely.
v4:
* use initializer macros for struct fb_ops
v2:
* use FB_IO_HELPERS option
Signed-off-by: Thomas Zimmermann <[email protected]>
Acked-by: Sam Ravnborg <[email protected]>
Cc: Patrik Jakobsson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Use the regular fbdev helpers for framebuffer I/O instead of DRM's
helpers. Exynos does not use damage handling, so DRM's fbdev helpers
are mere wrappers around the fbdev code.
By using fbdev helpers directly within each DRM fbdev emulation,
we can eventually remove DRM's wrapper functions entirely.
v4:
* use initializer macros for struct fb_ops
v3:
* don't reorder Makefile rules (Sam)
v2:
* use FB_IO_HELPERS option
Signed-off-by: Thomas Zimmermann <[email protected]>
Acked-by: Sam Ravnborg <[email protected]>
Cc: Inki Dae <[email protected]>
Cc: Seung-Woo Kim <[email protected]>
Cc: Kyungmin Park <[email protected]>
Cc: Krzysztof Kozlowski <[email protected]>
Cc: Alim Akhtar <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Use the regular fbdev helpers for framebuffer I/O instead of DRM's
helpers. Armada does not use damage handling, so DRM's fbdev helpers
are mere wrappers around the fbdev code.
By using fbdev helpers directly within each DRM fbdev emulation,
we can eventually remove DRM's wrapper functions entirely.
v4:
* use initializer macros for struct fb_ops
v2:
* use FB_IO_HELPERS option
Signed-off-by: Thomas Zimmermann <[email protected]>
Acked-by: Sam Ravnborg <[email protected]>
Cc: Russell King <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
For framebuffers in I/O and system memory, add macros that set
struct fb_ops to the respective callback functions.
For deferred I/O, add macros that generate callback functions with
damage handling. Add initializer macros that set struct fb_ops to
the generated callbacks.
These macros can remove a lot boilerplate code from fbdev drivers.
The drivers are supposed to use the macro that is required for its
framebuffer. Each macro is split into smaller helpers, so that
drivers with non-standard callbacks can pick and customize callbacks
as needed. There are individual helper macros for read/write, mmap
and drawing.
v5:
* fix whitespace errors (Jingfeng)
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Sam Ravnborg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Many fbdev drivers use the same set of fb_ops helpers. Add Kconfig
options to select them at once. This will help with making DRM's
fbdev emulation code more modular, but can also be used to simplify
fbdev's driver configs.
v3:
* fix select statement (Jingfeng)
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Sui Jingfeng <[email protected]>
Reviewed-by: Sam Ravnborg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Backmerging from drm-next to get commit e24e6d695377 ("drm/i915/display:
Implement fb_mmap callback function").
Signed-off-by: Thomas Zimmermann <[email protected]>
|
|
Use port-base reference for port@1.
This fixes the following schema warning:
imx8mp-dhcom-pdk3.dtb: dsi@32e60000: ports:port@1:endpoint: Unevaluated properties are not allowed ('data-lanes' was unexpected)
From schema: Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml
Fixes: 1f0d40d88f7a ("dt-bindings: bridge: Convert Samsung MIPI DSIM bridge to yaml")
Signed-off-by: Fabio Estevam <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
[narmstrong: removed line break between tags]
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
No functional changes but we can remove some unsightly index computation
and read/write functions if we convert the PMU sample array from a
one-dimensional to a two-dimensional array.
v2: Retain read/store helpers (Tvrtko)
Suggested-by: Tvrtko Ursulin <[email protected]>
Reviewed-by: Andrzej Hajda <[email protected]>
Reviewed-by: Tvrtko Ursulin <[email protected]>
Signed-off-by: Ashutosh Dixit <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
pmu_needs_timer() keeps the timer running even when GT is parked,
ostensibly to sample requested/actual frequencies. However
frequency_sample() has the following:
/* Report 0/0 (actual/requested) frequency while parked. */
if (!intel_gt_pm_get_if_awake(gt))
return;
The above code prevents frequencies to be sampled while the GT is
parked. So we might as well turn off the sampling timer itself in this
case and save CPU cycles/power.
v2: Instead of turning freq bits off, return false, since no counters will
run after this change when GT is parked (Tvrtko)
v3: Remove gpu_active argument of pmu_needs_timer (Andrzej)
Signed-off-by: Ashutosh Dixit <[email protected]>
Reviewed-by: Tvrtko Ursulin <[email protected]>
Reviewed-by: Andrzej Hajda <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Clearing out report id and timestamp as means to detect unlanded reports
only works if report size is power of 2. That is, only when report size is
a sub-multiple of the OA buffer size can we be certain that reports will
land at the same place each time in the OA buffer (after rewind). If report
size is not a power of 2, we need to zero out the entire report to be able
to detect unlanded reports reliably.
v2: Add Fixes tag (Umesh)
Fixes: 1cc064dce4ed ("drm/i915/perf: Add support for OA media units")
Reviewed-by: Umesh Nerlige Ramappa <[email protected]>
Reviewed-by: Lionel Landwerlin <[email protected]>
Signed-off-by: Ashutosh Dixit <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
We've already switched to new HXG definitions some time ago,
drop legacy CTB definitions to avoid mistakes.
Signed-off-by: Michal Wajdeczko <[email protected]>
Cc: Piotr Piórkowski <[email protected]>
Cc: John Harrison <[email protected]>
Reviewed-by: Piotr Piórkowski <[email protected]>
Signed-off-by: John Harrison <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Remove redundant assignment code for ttm->caching as it's overwritten
just a few lines later.
v2:
- Update the commit message.
Signed-off-by: Ma Jun <[email protected]>
Reviewed-by: Guchun Chen <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Christian König <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
On some devices the +5V Power pin of the HDMI connector and/or the ESD
protection logic is powered on by a separate regulator. Instead of
declaring this regulator as always-on, make hdmi-connector support the
additional hdmi-pwr supply.
Signed-off-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
In preparation to adding support for the hdmi_pwr supply, rename dp_pwr
structure field to the generic connector_pwr.
Reviewed-by: Laurent Pinchart <[email protected]>
Signed-off-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Follow the dp-connector example and add hdmi-pwr supply to drive the 5V
pin of the HDMI connector (together with some simple glue logic possibly
attached to the connector).
Reviewed-by: Laurent Pinchart <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
panel_edp_remove() always returned zero, so convert it to return void
without any loss and then just drop the return from
panel_edp_platform_remove().
Signed-off-by: Uwe Kleine-König <[email protected]>
Reviewed-by: Douglas Anderson <[email protected]>
Signed-off-by: Douglas Anderson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert
back to (the new) .probe() to be able to eventually drop .probe_new() from
struct i2c_driver.
Signed-off-by: Uwe Kleine-König <[email protected]>
Reviewed-by: Kieran Bingham <[email protected]>
Reviewed-by: Javier Martinez Canillas <[email protected]>
Reviewed-by: Martyn Welch <[email protected]>
Reviewed-by: Douglas Anderson <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Douglas Anderson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
For easier debug of any unexpected error responses from GuC that
might be related to non-blocking fast requests, track action code (and
stack if under DEBUG_GUC config) for every H2G request.
Signed-off-by: Michal Wajdeczko <[email protected]>
Signed-off-by: John Harrison <[email protected]>
Reviewed-by: John Harrison <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Instead of printing message fence twice, include HXG header of the
unexpected message and its len.
Signed-off-by: Michal Wajdeczko <[email protected]>
Signed-off-by: John Harrison <[email protected]>
Reviewed-by: John Harrison <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
In addition to the already defined REQUEST HXG message format,
which is used when sender expects some confirmation or data,
HXG protocol includes definition of the FAST REQUEST message,
that may be used when sender does not expect any useful data
to be returned.
Using this instead of GUC_HXG_TYPE_EVENT for non-blocking CTB requests
will allow GuC to send back GUC_HXG_TYPE_RESPONSE_FAILURE in case of
errors.
Note that it is not possible to return such errors to the caller,
since this is for non-blocking calls and the related fence is not
stored. Instead such messages are treated as unexpected, which will
give an indication of potential GuC misprogramming that warrants extra
debugging effort.
Signed-off-by: Michal Wajdeczko <[email protected]>
Signed-off-by: John Harrison <[email protected]>
Reviewed-by: John Harrison <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|