aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-10-01net: sched: cbs: Avoid division by zero when calculating the port rateVladimir Oltean1-1/+1
As explained in the "net: sched: taprio: Avoid division by zero on invalid link speed" commit, it is legal for the ethtool API to return zero as a link speed. So guard against it to ensure we don't perform a division by zero in kernel. Fixes: e0a7683d30e9 ("net/sched: cbs: fix port_rate miscalculation") Signed-off-by: Vladimir Oltean <[email protected]> Acked-by: Vinicius Costa Gomes <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-10-01net: sched: taprio: Avoid division by zero on invalid link speedVladimir Oltean1-1/+1
The check in taprio_set_picos_per_byte is currently not robust enough and will trigger this division by zero, due to e.g. PHYLINK not setting kset->base.speed when there is no PHY connected: [ 27.109992] Division by zero in kernel. [ 27.113842] CPU: 1 PID: 198 Comm: tc Not tainted 5.3.0-rc5-01246-gc4006b8c2637-dirty #212 [ 27.121974] Hardware name: Freescale LS1021A [ 27.126234] [<c03132e0>] (unwind_backtrace) from [<c030d8b8>] (show_stack+0x10/0x14) [ 27.133938] [<c030d8b8>] (show_stack) from [<c10b21b0>] (dump_stack+0xb0/0xc4) [ 27.141124] [<c10b21b0>] (dump_stack) from [<c10af97c>] (Ldiv0_64+0x8/0x18) [ 27.148052] [<c10af97c>] (Ldiv0_64) from [<c0700260>] (div64_u64+0xcc/0xf0) [ 27.154978] [<c0700260>] (div64_u64) from [<c07002d0>] (div64_s64+0x4c/0x68) [ 27.161993] [<c07002d0>] (div64_s64) from [<c0f3d890>] (taprio_set_picos_per_byte+0xe8/0xf4) [ 27.170388] [<c0f3d890>] (taprio_set_picos_per_byte) from [<c0f3f614>] (taprio_change+0x668/0xcec) [ 27.179302] [<c0f3f614>] (taprio_change) from [<c0f2bc24>] (qdisc_create+0x1fc/0x4f4) [ 27.187091] [<c0f2bc24>] (qdisc_create) from [<c0f2c0c8>] (tc_modify_qdisc+0x1ac/0x6f8) [ 27.195055] [<c0f2c0c8>] (tc_modify_qdisc) from [<c0ee9604>] (rtnetlink_rcv_msg+0x268/0x2dc) [ 27.203449] [<c0ee9604>] (rtnetlink_rcv_msg) from [<c0f4fef0>] (netlink_rcv_skb+0xe0/0x114) [ 27.211756] [<c0f4fef0>] (netlink_rcv_skb) from [<c0f4f6cc>] (netlink_unicast+0x1b4/0x22c) [ 27.219977] [<c0f4f6cc>] (netlink_unicast) from [<c0f4fa84>] (netlink_sendmsg+0x284/0x340) [ 27.228198] [<c0f4fa84>] (netlink_sendmsg) from [<c0eae5fc>] (sock_sendmsg+0x14/0x24) [ 27.235988] [<c0eae5fc>] (sock_sendmsg) from [<c0eaedf8>] (___sys_sendmsg+0x214/0x228) [ 27.243863] [<c0eaedf8>] (___sys_sendmsg) from [<c0eb015c>] (__sys_sendmsg+0x50/0x8c) [ 27.251652] [<c0eb015c>] (__sys_sendmsg) from [<c0301000>] (ret_fast_syscall+0x0/0x54) [ 27.259524] Exception stack(0xe8045fa8 to 0xe8045ff0) [ 27.264546] 5fa0: b6f608c8 000000f8 00000003 bed7e2f0 00000000 00000000 [ 27.272681] 5fc0: b6f608c8 000000f8 004ce54c 00000128 5d3ce8c7 00000000 00000026 00505c9c [ 27.280812] 5fe0: 00000070 bed7e298 004ddd64 b6dd1e64 Russell King points out that the ethtool API says zero is a valid return value of __ethtool_get_link_ksettings: * If it is enabled then they are read-only; if the link * is up they represent the negotiated link mode; if the link is down, * the speed is 0, %SPEED_UNKNOWN or the highest enabled speed and * @duplex is %DUPLEX_UNKNOWN or the best enabled duplex mode. So, it seems that taprio is not following the API... I'd suggest either fixing taprio, or getting agreement to change the ethtool API. The chosen path was to fix taprio. Fixes: 7b9eba7ba0c1 ("net/sched: taprio: fix picos_per_byte miscalculation") Signed-off-by: Vladimir Oltean <[email protected]> Acked-by: Vinicius Costa Gomes <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-10-01netfilter: nft_connlimit: disable bh on garbage collectionPablo Neira Ayuso1-1/+6
BH must be disabled when invoking nf_conncount_gc_list() to perform garbage collection, otherwise deadlock might happen. nf_conncount_add+0x1f/0x50 [nf_conncount] nft_connlimit_eval+0x4c/0xe0 [nft_connlimit] nft_dynset_eval+0xb5/0x100 [nf_tables] nft_do_chain+0xea/0x420 [nf_tables] ? sch_direct_xmit+0x111/0x360 ? noqueue_init+0x10/0x10 ? __qdisc_run+0x84/0x510 ? tcp_packet+0x655/0x1610 [nf_conntrack] ? ip_finish_output2+0x1a7/0x430 ? tcp_error+0x130/0x150 [nf_conntrack] ? nf_conntrack_in+0x1fc/0x4c0 [nf_conntrack] nft_do_chain_ipv4+0x66/0x80 [nf_tables] nf_hook_slow+0x44/0xc0 ip_rcv+0xb5/0xd0 ? ip_rcv_finish_core.isra.19+0x360/0x360 __netif_receive_skb_one_core+0x52/0x70 netif_receive_skb_internal+0x34/0xe0 napi_gro_receive+0xba/0xe0 e1000_clean_rx_irq+0x1e9/0x420 [e1000e] e1000e_poll+0xbe/0x290 [e1000e] net_rx_action+0x149/0x3b0 __do_softirq+0xde/0x2d8 irq_exit+0xba/0xc0 do_IRQ+0x85/0xd0 common_interrupt+0xf/0xf </IRQ> RIP: 0010:nf_conncount_gc_list+0x3b/0x130 [nf_conncount] Fixes: 2f971a8f4255 ("netfilter: nf_conncount: move all list iterations under spinlock") Reported-by: Laura Garcia Liebana <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2019-10-01netfilter: drop bridge nf reset from nf_resetFlorian Westphal31-45/+40
commit 174e23810cd31 ("sk_buff: drop all skb extensions on free and skb scrubbing") made napi recycle always drop skb extensions. The additional skb_ext_del() that is performed via nf_reset on napi skb recycle is not needed anymore. Most nf_reset() calls in the stack are there so queued skb won't block 'rmmod nf_conntrack' indefinitely. This removes the skb_ext_del from nf_reset, and renames it to a more fitting nf_reset_ct(). In a few selected places, add a call to skb_ext_reset to make sure that no active extensions remain. I am submitting this for "net", because we're still early in the release cycle. The patch applies to net-next too, but I think the rename causes needless divergence between those trees. Suggested-by: Eric Dumazet <[email protected]> Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2019-10-01Merge tag 'mac80211-for-davem-2019-10-01' of ↵David S. Miller6-13/+66
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== A small list of fixes this time: * two null pointer dereference fixes * a fix for preempt-enabled/BHs-enabled (lockdep) splats (that correctly pointed out a bug) * a fix for multi-BSSID ordering assumptions * a fix for the EDMG support, on-stack chandefs need to be initialized properly (now that they're bigger) * beacon (head) data from userspace should be validated ==================== Signed-off-by: David S. Miller <[email protected]>
2019-10-01ionic: select CONFIG_NET_DEVLINKArnd Bergmann1-0/+1
When no other driver selects the devlink library code, ionic produces a link failure: drivers/net/ethernet/pensando/ionic/ionic_devlink.o: In function `ionic_devlink_alloc': ionic_devlink.c:(.text+0xd): undefined reference to `devlink_alloc' drivers/net/ethernet/pensando/ionic/ionic_devlink.o: In function `ionic_devlink_register': ionic_devlink.c:(.text+0x71): undefined reference to `devlink_register' Add the same 'select' statement that the other drivers use here. Fixes: fbfb8031533c ("ionic: Add hardware init and device commands") Signed-off-by: Arnd Bergmann <[email protected]> Acked-by: Shannon Nelson <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-10-01docs: networking: Add title caret and missing docAdam Zerella2-1/+2
Resolving a couple of Sphinx documentation warnings that are generated in the networking section. - WARNING: document isn't included in any toctree - WARNING: Title underline too short. Signed-off-by: Adam Zerella <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-10-01net: socionext: netsec: always grab descriptor lockLorenzo Bianconi1-23/+7
Always acquire tx descriptor spinlock even if a xdp program is not loaded on the netsec device since ndo_xdp_xmit can run concurrently with netsec_netdev_start_xmit and netsec_clean_tx_dring. This can happen loading a xdp program on a different device (e.g virtio-net) and xdp_do_redirect_map/xdp_do_redirect_slow can redirect to netsec even if we do not have a xdp program on it. Fixes: ba2b232108d3 ("net: netsec: add XDP support") Tested-by: Ilias Apalodimas <[email protected]> Signed-off-by: Lorenzo Bianconi <[email protected]> Reviewed-by: Ilias Apalodimas <[email protected]> Acked-by: Toke Høiland-Jørgensen <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-10-01mac80211: keep BHs disabled while calling drv_tx_wake_queue()Johannes Berg1-5/+8
Drivers typically expect this, as it's the case for almost all cases where this is called (i.e. from the TX path). Also, the code in mac80211 itself (if the driver calls ieee80211_tx_dequeue()) expects this as it uses this_cpu_ptr() without additional protection. This should fix various reports of the problem: https://bugzilla.kernel.org/show_bug.cgi?id=204127 https://lore.kernel.org/linux-wireless/CAN5HydrWb3o_FE6A1XDnP1E+xS66d5kiEuhHfiGKkLNQokx13Q@mail.gmail.com/ https://lore.kernel.org/lkml/[email protected]/ Cc: [email protected] Reported-and-tested-by: Jiri Kosina <[email protected]> Reported-by: Aaron Hill <[email protected]> Reported-by: Lukas Redlinger <[email protected]> Reported-by: Oleksii Shevchuk <[email protected]> Fixes: 21a5d4c3a45c ("mac80211: add stop/start logic for software TXQs") Link: https://lore.kernel.org/r/1569928763-I3e8838c5ecad878e59d4a94eb069a90f6641461a@changeid Reviewed-by: Toke Høiland-Jørgensen <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2019-10-01mac80211: fix txq null pointer dereferenceMiaoqing Pan1-2/+9
If the interface type is P2P_DEVICE or NAN, read the file of '/sys/kernel/debug/ieee80211/phyx/netdev:wlanx/aqm' will get a NULL pointer dereference. As for those interface type, the pointer sdata->vif.txq is NULL. Unable to handle kernel NULL pointer dereference at virtual address 00000011 CPU: 1 PID: 30936 Comm: cat Not tainted 4.14.104 #1 task: ffffffc0337e4880 task.stack: ffffff800cd20000 PC is at ieee80211_if_fmt_aqm+0x34/0xa0 [mac80211] LR is at ieee80211_if_fmt_aqm+0x34/0xa0 [mac80211] [...] Process cat (pid: 30936, stack limit = 0xffffff800cd20000) [...] [<ffffff8000b7cd00>] ieee80211_if_fmt_aqm+0x34/0xa0 [mac80211] [<ffffff8000b7c414>] ieee80211_if_read+0x60/0xbc [mac80211] [<ffffff8000b7ccc4>] ieee80211_if_read_aqm+0x28/0x30 [mac80211] [<ffffff80082eff94>] full_proxy_read+0x2c/0x48 [<ffffff80081eef00>] __vfs_read+0x2c/0xd4 [<ffffff80081ef084>] vfs_read+0x8c/0x108 [<ffffff80081ef494>] SyS_read+0x40/0x7c Signed-off-by: Miaoqing Pan <[email protected]> Acked-by: Toke Høiland-Jørgensen <[email protected]> Link: https://lore.kernel.org/r/[email protected] [trim useless data from commit message] Signed-off-by: Johannes Berg <[email protected]>
2019-10-01nl80211: fix null pointer dereferenceMiaoqing Pan1-0/+3
If the interface is not in MESH mode, the command 'iw wlanx mpath del' will cause kernel panic. The root cause is null pointer access in mpp_flush_by_proxy(), as the pointer 'sdata->u.mesh.mpp_paths' is NULL for non MESH interface. Unable to handle kernel NULL pointer dereference at virtual address 00000068 [...] PC is at _raw_spin_lock_bh+0x20/0x5c LR is at mesh_path_del+0x1c/0x17c [mac80211] [...] Process iw (pid: 4537, stack limit = 0xd83e0238) [...] [<c021211c>] (_raw_spin_lock_bh) from [<bf8c7648>] (mesh_path_del+0x1c/0x17c [mac80211]) [<bf8c7648>] (mesh_path_del [mac80211]) from [<bf6cdb7c>] (extack_doit+0x20/0x68 [compat]) [<bf6cdb7c>] (extack_doit [compat]) from [<c05c309c>] (genl_rcv_msg+0x274/0x30c) [<c05c309c>] (genl_rcv_msg) from [<c05c25d8>] (netlink_rcv_skb+0x58/0xac) [<c05c25d8>] (netlink_rcv_skb) from [<c05c2e14>] (genl_rcv+0x20/0x34) [<c05c2e14>] (genl_rcv) from [<c05c1f90>] (netlink_unicast+0x11c/0x204) [<c05c1f90>] (netlink_unicast) from [<c05c2420>] (netlink_sendmsg+0x30c/0x370) [<c05c2420>] (netlink_sendmsg) from [<c05886d0>] (sock_sendmsg+0x70/0x84) [<c05886d0>] (sock_sendmsg) from [<c0589f4c>] (___sys_sendmsg.part.3+0x188/0x228) [<c0589f4c>] (___sys_sendmsg.part.3) from [<c058add4>] (__sys_sendmsg+0x4c/0x70) [<c058add4>] (__sys_sendmsg) from [<c0208c80>] (ret_fast_syscall+0x0/0x44) Code: e2822c02 e2822001 e5832004 f590f000 (e1902f9f) ---[ end trace bbd717600f8f884d ]--- Signed-off-by: Miaoqing Pan <[email protected]> Link: https://lore.kernel.org/r/[email protected] [trim useless data from commit message] Signed-off-by: Johannes Berg <[email protected]>
2019-10-01cfg80211: initialize on-stack chandefsJohannes Berg3-3/+5
In a few places we don't properly initialize on-stack chandefs, resulting in EDMG data to be non-zero, which broke things. Additionally, in a few places we rely on the driver to init the data completely, but perhaps we shouldn't as non-EDMG drivers may not initialize the EDMG data, also initialize it there. Cc: [email protected] Fixes: 2a38075cd0be ("nl80211: Add support for EDMG channels") Reported-by: Dmitry Osipenko <[email protected]> Tested-by: Dmitry Osipenko <[email protected]> Link: https://lore.kernel.org/r/1569239475-I2dcce394ecf873376c386a78f31c2ec8b538fa25@changeid Signed-off-by: Johannes Berg <[email protected]>
2019-10-01cfg80211: validate SSID/MBSSID element ordering assumptionJohannes Berg1-1/+6
The code copying the data assumes that the SSID element is before the MBSSID element, but since the data is untrusted from the AP, this cannot be guaranteed. Validate that this is indeed the case and ignore the MBSSID otherwise, to avoid having to deal with both cases for the copy of data that should be between them. Cc: [email protected] Fixes: 0b8fb8235be8 ("cfg80211: Parsing of Multiple BSSID information in scanning") Link: https://lore.kernel.org/r/1569009255-I1673911f5eae02964e21bdc11b2bf58e5e207e59@changeid Signed-off-by: Johannes Berg <[email protected]>
2019-10-01nl80211: validate beacon headJohannes Berg1-2/+35
We currently don't validate the beacon head, i.e. the header, fixed part and elements that are to go in front of the TIM element. This means that the variable elements there can be malformed, e.g. have a length exceeding the buffer size, but most downstream code from this assumes that this has already been checked. Add the necessary checks to the netlink policy. Cc: [email protected] Fixes: ed1b6cc7f80f ("cfg80211/nl80211: add beacon settings") Link: https://lore.kernel.org/r/1569009255-I7ac7fbe9436e9d8733439eab8acbbd35e55c74ef@changeid Signed-off-by: Johannes Berg <[email protected]>
2019-10-01Revert "s390/dasd: Add discard support for ESE volumes"Stefan Haberland1-54/+3
This reverts commit 7e64db1597fe114b83fe17d0ba96c6aa5fca419a. The thin provisioning feature introduces an IOCTL and the discard support to allow userspace tools and filesystems to release unused and previously allocated space respectively. During some internal performance improvements and further tests, the release of allocated space revealed some issues that may lead to data corruption in some configurations when filesystems are mounted with discard support enabled. While we're working on a fix and trying to clarify the situation, this commit reverts the discard support for ESE volumes to prevent potential data corruption. Cc: <[email protected]> # 5.3 Signed-off-by: Stefan Haberland <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2019-10-01s390/dasd: Fix error handling during online processingJan Höppner1-16/+8
It is possible that the CCW commands for reading volume and extent pool information are not supported, either by the storage server (for dedicated DASDs) or by z/VM (for virtual devices, such as MDISKs). As a command reject will occur in such a case, the current error handling leads to a failing online processing and thus the DASD can't be used at all. Since the data being read is not essential for an fully operational DASD, the error handling can be removed. Information about the failing command is sent to the s390dbf debug feature. Fixes: c729696bcf8b ("s390/dasd: Recognise data for ESE volumes") Cc: <[email protected]> # 5.3 Reported-by: Frank Heimes <[email protected]> Signed-off-by: Jan Höppner <[email protected]> Signed-off-by: Stefan Haberland <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2019-10-01io_uring: use __kernel_timespec in timeout ABIArnd Bergmann1-4/+4
All system calls use struct __kernel_timespec instead of the old struct timespec, but this one was just added with the old-style ABI. Change it now to enforce the use of __kernel_timespec, avoiding ABI confusion and the need for compat handlers on 32-bit architectures. Any user space caller will have to use __kernel_timespec now, but this is unambiguous and works for any C library regardless of the time_t definition. A nicer way to specify the timeout would have been a less ambiguous 64-bit nanosecond value, but I suppose it's too late now to change that as this would impact both 32-bit and 64-bit users. Fixes: 5262f567987d ("io_uring: IORING_OP_TIMEOUT support") Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2019-10-01loop: change queue block size to match when using DIOMartijn Coenen1-0/+10
The loop driver assumes that if the passed in fd is opened with O_DIRECT, the caller wants to use direct I/O on the loop device. However, if the underlying block device has a different block size than the loop block queue, direct I/O can't be enabled. Instead of requiring userspace to manually change the blocksize and re-enable direct I/O, just change the queue block sizes to match, as well as the io_min size. Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Martijn Coenen <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2019-10-01perf_event_open: switch to copy_struct_from_user()Aleksa Sarai1-38/+9
Switch perf_event_open() syscall from it's own copying struct perf_event_attr from userspace to the new dedicated copy_struct_from_user() helper. The change is very straightforward, and helps unify the syscall interface for struct-from-userspace syscalls. Signed-off-by: Aleksa Sarai <[email protected]> Reviewed-by: Kees Cook <[email protected]> Reviewed-by: Christian Brauner <[email protected]> [[email protected]: improve commit message] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Christian Brauner <[email protected]>
2019-10-01sched_setattr: switch to copy_struct_from_user()Aleksa Sarai1-36/+7
Switch sched_setattr() syscall from it's own copying struct sched_attr from userspace to the new dedicated copy_struct_from_user() helper. The change is very straightforward, and helps unify the syscall interface for struct-from-userspace syscalls. Ideally we could also unify sched_getattr(2)-style syscalls as well, but unfortunately the correct semantics for such syscalls are much less clear (see [1] for more detail). In future we could come up with a more sane idea for how the syscall interface should look. [1]: commit 1251201c0d34 ("sched/core: Fix uclamp ABI bug, clean up and robustify sched_read_attr() ABI logic and code") Signed-off-by: Aleksa Sarai <[email protected]> Reviewed-by: Kees Cook <[email protected]> Reviewed-by: Christian Brauner <[email protected]> [[email protected]: improve commit message] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Christian Brauner <[email protected]>
2019-10-01clone3: switch to copy_struct_from_user()Aleksa Sarai2-27/+9
Switch clone3() syscall from it's own copying struct clone_args from userspace to the new dedicated copy_struct_from_user() helper. The change is very straightforward, and helps unify the syscall interface for struct-from-userspace syscalls. Additionally, explicitly define CLONE_ARGS_SIZE_VER0 to match the other users of the struct-extension pattern. Signed-off-by: Aleksa Sarai <[email protected]> Reviewed-by: Kees Cook <[email protected]> Reviewed-by: Christian Brauner <[email protected]> [[email protected]: improve commit message] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Christian Brauner <[email protected]>
2019-10-01lib: introduce copy_struct_from_user() helperAleksa Sarai5-13/+263
A common pattern for syscall extensions is increasing the size of a struct passed from userspace, such that the zero-value of the new fields result in the old kernel behaviour (allowing for a mix of userspace and kernel vintages to operate on one another in most cases). While this interface exists for communication in both directions, only one interface is straightforward to have reasonable semantics for (userspace passing a struct to the kernel). For kernel returns to userspace, what the correct semantics are (whether there should be an error if userspace is unaware of a new extension) is very syscall-dependent and thus probably cannot be unified between syscalls (a good example of this problem is [1]). Previously there was no common lib/ function that implemented the necessary extension-checking semantics (and different syscalls implemented them slightly differently or incompletely[2]). Future patches replace common uses of this pattern to make use of copy_struct_from_user(). Some in-kernel selftests that insure that the handling of alignment and various byte patterns are all handled identically to memchr_inv() usage. [1]: commit 1251201c0d34 ("sched/core: Fix uclamp ABI bug, clean up and robustify sched_read_attr() ABI logic and code") [2]: For instance {sched_setattr,perf_event_open,clone3}(2) all do do similar checks to copy_struct_from_user() while rt_sigprocmask(2) always rejects differently-sized struct arguments. Suggested-by: Rasmus Villemoes <[email protected]> Signed-off-by: Aleksa Sarai <[email protected]> Reviewed-by: Kees Cook <[email protected]> Reviewed-by: Christian Brauner <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Christian Brauner <[email protected]>
2019-10-01kvm: vmx: Limit guest PMCs to those supported on the hostJim Mattson1-2/+5
KVM can only virtualize as many PMCs as the host supports. Limit the number of generic counters and fixed counters to the number of corresponding counters supported on the host, rather than to INTEL_PMC_MAX_GENERIC and INTEL_PMC_MAX_FIXED, respectively. Note that INTEL_PMC_MAX_GENERIC is currently 32, which exceeds the 18 contiguous MSR indices reserved by Intel for event selectors. Since the existing code relies on a contiguous range of MSR indices for event selectors, it can't possibly work for more than 18 general purpose counters. Fixes: f5132b01386b5a ("KVM: Expose a version 2 architectural PMU to a guests") Signed-off-by: Jim Mattson <[email protected]> Reviewed-by: Marc Orr <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2019-10-01s390/qdio: clarify size of the QIB parm areaJulian Wiedmann3-4/+3
The QIB parm area is 128 bytes long. Current code consistently misuses an _entirely unrelated_ QDIO constant, merely because it has the same value. Stop doing so. Signed-off-by: Julian Wiedmann <[email protected]> Reviewed-by: Benjamin Block <[email protected]> Reviewed-by: Jens Remus <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]>
2019-10-01s390/cpumf: Fix indentation in sampling device driverThomas Richter1-1/+1
Fix indentation in the s390 CPU Measuement Facility sampling device dirver. Signed-off-by: Thomas Richter <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]>
2019-10-01s390/cpumsf: Check for CPU Measurement samplingThomas Richter2-1/+10
s390 IBM z15 introduces a check if the CPU Mesurement Facility sampling is temporarily unavailable. If this is the case return -EBUSY and abort the setup of CPU Measuement facility sampling. Signed-off-by: Thomas Richter <[email protected]> Reviewed-by: Christian Borntraeger <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]>
2019-10-01s390/cpumf: Use consistant debug print formatThomas Richter1-2/+2
Use consistant debug print format of the form variable blank value. Signed-off-by: Thomas Richter <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]>
2019-10-01xen/efi: Set nonblocking callbacksRoss Lagerwall2-0/+4
Other parts of the kernel expect these nonblocking EFI callbacks to exist and crash when running under Xen. Since the implementations of xen_efi_set_variable() and xen_efi_query_variable_info() do not take any locks, use them for the nonblocking callbacks too. Signed-off-by: Ross Lagerwall <[email protected]> Reviewed-by: Juergen Gross <[email protected]> Signed-off-by: Juergen Gross <[email protected]>
2019-09-30net: sched: taprio: Fix potential integer overflow in taprio_set_picos_per_byteVladimir Oltean1-2/+1
The speed divisor is used in a context expecting an s64, but it is evaluated using 32-bit arithmetic. To avoid that happening, instead of multiplying by 1,000,000 in the first place, simplify the fraction and do a standard 32 bit division instead. Fixes: f04b514c0ce2 ("taprio: Set default link speed to 10 Mbps in taprio_set_picos_per_byte") Reported-by: Gustavo A. R. Silva <[email protected]> Suggested-by: Eric Dumazet <[email protected]> Signed-off-by: Vladimir Oltean <[email protected]> Acked-by: Vinicius Costa Gomes <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-09-30net: dsa: sja1105: Prevent leaking memoryNavid Emamdoost1-2/+4
In sja1105_static_config_upload, in two cases memory is leaked: when static_config_buf_prepare_for_upload fails and when sja1105_inhibit_tx fails. In both cases config_buf should be released. Fixes: 8aa9ebccae87 ("net: dsa: Introduce driver for NXP SJA1105 5-port L2 switch") Fixes: 1a4c69406cc1 ("net: dsa: sja1105: Prevent PHY jabbering during switch reset") Signed-off-by: Navid Emamdoost <[email protected]> Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-10-01modpost: fix static EXPORT_SYMBOL warnings for UML buildMasahiro Yamada1-4/+9
Johannes Berg reports lots of modpost warnings on ARCH=um builds: WARNING: "rename" [vmlinux] is a static EXPORT_SYMBOL WARNING: "lseek" [vmlinux] is a static EXPORT_SYMBOL WARNING: "ftruncate64" [vmlinux] is a static EXPORT_SYMBOL WARNING: "getuid" [vmlinux] is a static EXPORT_SYMBOL WARNING: "lseek64" [vmlinux] is a static EXPORT_SYMBOL WARNING: "unlink" [vmlinux] is a static EXPORT_SYMBOL WARNING: "pwrite64" [vmlinux] is a static EXPORT_SYMBOL WARNING: "close" [vmlinux] is a static EXPORT_SYMBOL WARNING: "opendir" [vmlinux] is a static EXPORT_SYMBOL WARNING: "pread64" [vmlinux] is a static EXPORT_SYMBOL WARNING: "syscall" [vmlinux] is a static EXPORT_SYMBOL WARNING: "readdir" [vmlinux] is a static EXPORT_SYMBOL WARNING: "readdir64" [vmlinux] is a static EXPORT_SYMBOL WARNING: "futimes" [vmlinux] is a static EXPORT_SYMBOL WARNING: "__lxstat" [vmlinux] is a static EXPORT_SYMBOL WARNING: "write" [vmlinux] is a static EXPORT_SYMBOL WARNING: "closedir" [vmlinux] is a static EXPORT_SYMBOL WARNING: "__xstat" [vmlinux] is a static EXPORT_SYMBOL WARNING: "fsync" [vmlinux] is a static EXPORT_SYMBOL WARNING: "__lxstat64" [vmlinux] is a static EXPORT_SYMBOL WARNING: "__fxstat64" [vmlinux] is a static EXPORT_SYMBOL WARNING: "telldir" [vmlinux] is a static EXPORT_SYMBOL WARNING: "printf" [vmlinux] is a static EXPORT_SYMBOL WARNING: "readlink" [vmlinux] is a static EXPORT_SYMBOL WARNING: "__sprintf_chk" [vmlinux] is a static EXPORT_SYMBOL WARNING: "link" [vmlinux] is a static EXPORT_SYMBOL WARNING: "rmdir" [vmlinux] is a static EXPORT_SYMBOL WARNING: "fdatasync" [vmlinux] is a static EXPORT_SYMBOL WARNING: "truncate" [vmlinux] is a static EXPORT_SYMBOL WARNING: "statfs" [vmlinux] is a static EXPORT_SYMBOL WARNING: "__errno_location" [vmlinux] is a static EXPORT_SYMBOL WARNING: "__xmknod" [vmlinux] is a static EXPORT_SYMBOL WARNING: "open64" [vmlinux] is a static EXPORT_SYMBOL WARNING: "truncate64" [vmlinux] is a static EXPORT_SYMBOL WARNING: "open" [vmlinux] is a static EXPORT_SYMBOL WARNING: "read" [vmlinux] is a static EXPORT_SYMBOL WARNING: "chown" [vmlinux] is a static EXPORT_SYMBOL WARNING: "chmod" [vmlinux] is a static EXPORT_SYMBOL WARNING: "utime" [vmlinux] is a static EXPORT_SYMBOL WARNING: "fchmod" [vmlinux] is a static EXPORT_SYMBOL WARNING: "seekdir" [vmlinux] is a static EXPORT_SYMBOL WARNING: "ioctl" [vmlinux] is a static EXPORT_SYMBOL WARNING: "dup2" [vmlinux] is a static EXPORT_SYMBOL WARNING: "statfs64" [vmlinux] is a static EXPORT_SYMBOL WARNING: "utimes" [vmlinux] is a static EXPORT_SYMBOL WARNING: "mkdir" [vmlinux] is a static EXPORT_SYMBOL WARNING: "fchown" [vmlinux] is a static EXPORT_SYMBOL WARNING: "__guard" [vmlinux] is a static EXPORT_SYMBOL WARNING: "symlink" [vmlinux] is a static EXPORT_SYMBOL WARNING: "access" [vmlinux] is a static EXPORT_SYMBOL WARNING: "__stack_smash_handler" [vmlinux] is a static EXPORT_SYMBOL When you run "make", the modpost is run twice; before linking vmlinux, and before building modules. All the warnings above are from the second modpost. The offending symbols are defined not in vmlinux, but in the C library. The first modpost is run against the relocatable vmlinux.o, and those warnings are nicely suppressed because the SH_UNDEF entries from the symbol table clear the ->is_static flag. The second modpost is run against the executable vmlinux (+ modules), where those symbols have been resolved, but the definitions do not exist. This commit fixes it in a straightforward way; suppress the static EXPORT_SYMBOL warnings from "vmlinux". Without this commit, we see valid warnings twice anyway. For example, ARCH=arm64 defconfig shows the following warning twice: WARNING: "HYPERVISOR_platform_op" [vmlinux] is a static EXPORT_SYMBOL_GPL So, it is reasonable to suppress the second one. Fixes: 15bfc2348d54 ("modpost: check for static EXPORT_SYMBOL* functions") Reported-by: Johannes Berg <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]> Tested-by: Johannes Berg <[email protected]> Tested-by: Denis Efremov <[email protected]>
2019-10-01kbuild: correct formatting of header in kbuild module docsAlex Gaynor1-1/+2
Minor formatting fixup. Fixes: cd238effefa2 ("docs: kbuild: convert docs to ReST and rename to *.rst") Signed-off-by: Alex Gaynor <[email protected]> Signed-off-by: Matthew Garrett <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2019-10-01kbuild: remove SUBDIRS supportMasahiro Yamada1-18/+2
Linux 5.3 is out. Remove the SUBDIRS support. Signed-off-by: Masahiro Yamada <[email protected]>
2019-09-30net: dsa: sja1105: Ensure PTP time for rxtstamp reconstruction is not in the ↵Vladimir Oltean1-2/+2
past Sometimes the PTP synchronization on the switch 'jumps': ptp4l[11241.155]: rms 8 max 16 freq -21732 +/- 11 delay 742 +/- 0 ptp4l[11243.157]: rms 7 max 17 freq -21731 +/- 10 delay 744 +/- 0 ptp4l[11245.160]: rms 33592410 max 134217731 freq +192422 +/- 8530253 delay 743 +/- 0 ptp4l[11247.163]: rms 811631 max 964131 freq +10326 +/- 557785 delay 743 +/- 0 ptp4l[11249.166]: rms 261936 max 533876 freq -304323 +/- 126371 delay 744 +/- 0 ptp4l[11251.169]: rms 48700 max 57740 freq -20218 +/- 30532 delay 744 +/- 0 ptp4l[11253.171]: rms 14570 max 30163 freq -5568 +/- 7563 delay 742 +/- 0 ptp4l[11255.174]: rms 2914 max 3440 freq -22001 +/- 1667 delay 744 +/- 1 ptp4l[11257.177]: rms 811 max 1710 freq -22653 +/- 451 delay 744 +/- 1 ptp4l[11259.180]: rms 177 max 218 freq -21695 +/- 89 delay 741 +/- 0 ptp4l[11261.182]: rms 45 max 92 freq -21677 +/- 32 delay 742 +/- 0 ptp4l[11263.186]: rms 14 max 32 freq -21733 +/- 11 delay 742 +/- 0 ptp4l[11265.188]: rms 9 max 14 freq -21725 +/- 12 delay 742 +/- 0 ptp4l[11267.191]: rms 9 max 16 freq -21727 +/- 13 delay 742 +/- 0 ptp4l[11269.194]: rms 6 max 15 freq -21726 +/- 9 delay 743 +/- 0 ptp4l[11271.197]: rms 8 max 15 freq -21728 +/- 11 delay 743 +/- 0 ptp4l[11273.200]: rms 6 max 12 freq -21727 +/- 8 delay 743 +/- 0 ptp4l[11275.202]: rms 9 max 17 freq -21720 +/- 11 delay 742 +/- 0 ptp4l[11277.205]: rms 9 max 18 freq -21725 +/- 12 delay 742 +/- 0 Background: the switch only offers partial RX timestamps (24 bits) and it is up to the driver to read the PTP clock to fill those timestamps up to 64 bits. But the PTP clock readout needs to happen quickly enough (in 0.135 seconds, in fact), otherwise the PTP clock will wrap around 24 bits, condition which cannot be detected. Looking at the 'max 134217731' value on output line 3, one can see that in hex it is 0x8000003. Because the PTP clock resolution is 8 ns, that means 0x1000000 in ticks, which is exactly 2^24. So indeed this is a PTP clock wraparound, but the reason might be surprising. What is going on is that sja1105_tstamp_reconstruct(priv, now, ts) expects a "now" time that is later than the "ts" was snapshotted at. This, of course, is obvious: we read the PTP time _after_ the partial RX timestamp was received. However, the workqueue is processing frames from a skb queue and reuses the same PTP time, read once at the beginning. Normally the skb queue only contains one frame and all goes well. But when the skb queue contains two frames, the second frame that gets dequeued might have been partially timestamped by the RX MAC _after_ we had read our PTP time initially. The code was originally like that due to concerns that SPI access for PTP time readout is a slow process, and we are time-constrained anyway (aka: premature optimization). But some timing analysis reveals that the time spent until the RX timestamp is completely reconstructed is 1 order of magnitude lower than the 0.135 s deadline even under worst-case conditions. So we can afford to read the PTP time for each frame in the RX timestamping queue, which of course ensures that the full PTP time is in the partial timestamp's future. Fixes: f3097be21bf1 ("net: dsa: sja1105: Add a state machine for RX timestamping") Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-10-01kbuild: remove ar-option and KBUILD_ARFLAGSMasahiro Yamada6-17/+3
Commit 40df759e2b9e ("kbuild: Fix build with binutils <= 2.19") introduced ar-option and KBUILD_ARFLAGS to deal with old binutils. According to Documentation/process/changes.rst, the current minimal supported version of binutils is 2.21 so you can assume the 'D' option is always supported. Not only GNU ar but also llvm-ar supports it. With the 'D' option hard-coded, there is no more user of ar-option or KBUILD_ARFLAGS. Signed-off-by: Masahiro Yamada <[email protected]> Reviewed-by: Nick Desaulniers <[email protected]> Tested-by: Nick Desaulniers <[email protected]>
2019-09-30Merge tag 'ieee802154-for-davem-2019-09-28' of ↵David S. Miller3-3/+4
git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan Stefan Schmidt says: ==================== pull-request: ieee802154 for net 2019-09-28 An update from ieee802154 for your *net* tree. Three driver fixes. Navid Emamdoost fixed a memory leak on an error path in the ca8210 driver, Johan Hovold fixed a use-after-free found by syzbot in the atusb driver and Christophe JAILLET makes sure __skb_put_data is used instead of memcpy in the mcr20a driver I switched from branches to tags here to be pulled from. So far not annotated and not signed. Once I fixed my scripts it should contain this messages as annotations. If you want it signed as well just tell me. If there are any problems let me know. ==================== Signed-off-by: David S. Miller <[email protected]>
2019-09-30net: Unpublish sk from sk_reuseport_cb before call_rcuMartin KaFai Lau1-3/+8
The "reuse->sock[]" array is shared by multiple sockets. The going away sk must unpublish itself from "reuse->sock[]" before making call_rcu() call. However, this unpublish-action is currently done after a grace period and it may cause use-after-free. The fix is to move reuseport_detach_sock() to sk_destruct(). Due to the above reason, any socket with sk_reuseport_cb has to go through the rcu grace period before freeing it. It is a rather old bug (~3 yrs). The Fixes tag is not necessary the right commit but it is the one that introduced the SOCK_RCU_FREE logic and this fix is depending on it. Fixes: a4298e4522d6 ("net: add SOCK_RCU_FREE socket flag") Cc: Eric Dumazet <[email protected]> Suggested-by: Eric Dumazet <[email protected]> Signed-off-by: Martin KaFai Lau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-09-30MIPS: dts: ar9331: fix interrupt-controller sizeOleksij Rempel1-1/+1
It is two registers each of 4 byte. Signed-off-by: Oleksij Rempel <[email protected]> Signed-off-by: Paul Burton <[email protected]> Cc: Rob Herring <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Pengutronix Kernel Team <[email protected]> Cc: Ralf Baechle <[email protected]> Cc: James Hogan <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected]
2019-09-30MIPS: Loongson64: Fix boot failure after dropping boot_mem_mapHuacai Chen2-28/+18
From commit a94e4f24ec83 ("MIPS: init: Drop boot_mem_map") onwards, add_memory_region() is handled by memblock_add()/memblock_reserve() directly and all bootmem API should be converted to memblock API. Otherwise it will lead to boot failure, especially in the NUMA case because add_memory_region lose the node_id information. Fixes: a94e4f24ec836c8984f83959 ("MIPS: init: Drop boot_mem_map") Signed-off-by: Huacai Chen <[email protected]> Signed-off-by: Jiaxun Yang <[email protected]> [[email protected]: - Invert node_id check to de-indent the switch statement & avoid lines over 80 characters. - Fixup commit reference in commit message.] Signed-off-by: Paul Burton <[email protected]> Cc: Ralf Baechle <[email protected]> Cc: James Hogan <[email protected]> Cc: [email protected] Cc: [email protected] Cc: Fuxin Zhang <[email protected]> Cc: Zhangjin Wu <[email protected]> Cc: Huacai Chen <[email protected]>
2019-10-01erofs: fix mis-inplace determination related with noio chainGao Xiang1-2/+10
Fix a recent cleanup patch. noio (bypass) chain is handled asynchronously against submit chain, therefore inplace I/O or pagevec cannot be applied to such pages. Add detailed comment for this as well. Fixes: 97e86a858bc3 ("staging: erofs: tidy up decompression frontend") Reviewed-by: Chao Yu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Gao Xiang <[email protected]>
2019-10-01erofs: fix erofs_get_meta_page locking due to a cleanupGao Xiang1-3/+7
After doing more drop_caches stress test on our products, I found the mistake introduced by a very recent cleanup [1]. The current rule is that "erofs_get_meta_page" should be returned with page locked (although it's mostly unnecessary for read-only fs after pages are PG_uptodate), but a fix should be done for this. [1] https://lore.kernel.org/r/[email protected] Fixes: 618f40ea026b ("erofs: use read_cache_page_gfp for erofs_get_meta_page") Reviewed-by: Chao Yu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Gao Xiang <[email protected]>
2019-10-01MAINTAINERS: erofs: complete sub-entries for erofsGao Xiang1-0/+3
Add a formal git tree and missing files for erofs after moving out of staging for everyone to blame in order for better improvement. Acked-by: Chao Yu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Gao Xiang <[email protected]>
2019-10-01erofs: fix return value check in erofs_read_superblock()Wei Yongjun1-2/+2
In case of error, the function read_mapping_page() returns ERR_PTR() not NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: fe7c2423570d ("erofs: use read_mapping_page instead of sb_bread") Reviewed-by: Gao Xiang <[email protected]> Reviewed-by: Chao Yu <[email protected]> Signed-off-by: Wei Yongjun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Gao Xiang <[email protected]>
2019-09-30selftests: pidfd: Fix undefined reference to pthread_create()Shuah Khan1-1/+1
Fix build failure: undefined reference to `pthread_create' collect2: error: ld returned 1 exit status Fix CFLAGS to include pthread correctly. Fixes: 740378dc7834 ("pidfd: add polling selftests") Signed-off-by: Shuah Khan <[email protected]> Reviewed-by: Christian Brauner <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Christian Brauner <[email protected]>
2019-09-30sched: Add __ASSEMBLY__ guards around struct clone_argsSeth Forshee1-0/+2
The addition of struct clone_args to uapi/linux/sched.h is not protected by __ASSEMBLY__ guards, causing a failure to build from source for glibc on RISC-V. Add the guards to fix this. Fixes: 7f192e3cd316 ("fork: add clone3") Signed-off-by: Seth Forshee <[email protected]> Cc: <[email protected]> Acked-by: Ingo Molnar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Christian Brauner <[email protected]>
2019-09-30arm64/ARM: configs: Change CONFIG_REMOTEPROC from m to yKeerthy4-4/+4
Commit 6334150e9a36 ("remoteproc: don't allow modular build") changes CONFIG_REMOTEPROC to a boolean from a tristate config option which inhibits all defconfigs marking CONFIG_REMOTEPROC as a module in compiling the remoteproc and dependent config options. So fix the configs to have CONFIG_REMOTEPROC built in. Link: https://lore.kernel.org/r/[email protected] Fixes: 6334150e9a36 ("remoteproc: don't allow modular build") Signed-off-by: Keerthy <[email protected]> Acked-by: Will Deacon <[email protected]> [olof: Fixed up all 4 occurrances in this one commit] Signed-off-by: Olof Johansson <[email protected]>
2019-09-30erspan: remove the incorrect mtu limit for erspanHaishuang Yan1-0/+1
erspan driver calls ether_setup(), after commit 61e84623ace3 ("net: centralize net_device min/max MTU checking"), the range of mtu is [min_mtu, max_mtu], which is [68, 1500] by default. It causes the dev mtu of the erspan device to not be greater than 1500, this limit value is not correct for ipgre tap device. Tested: Before patch: # ip link set erspan0 mtu 1600 Error: mtu greater than device maximum. After patch: # ip link set erspan0 mtu 1600 # ip -d link show erspan0 21: erspan0@NONE: <BROADCAST,MULTICAST> mtu 1600 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 0 Fixes: 61e84623ace3 ("net: centralize net_device min/max MTU checking") Signed-off-by: Haishuang Yan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-09-30sch_cbq: validate TCA_CBQ_WRROPT to avoid crashEric Dumazet1-14/+29
syzbot reported a crash in cbq_normalize_quanta() caused by an out of range cl->priority. iproute2 enforces this check, but malicious users do not. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN PTI Modules linked in: CPU: 1 PID: 26447 Comm: syz-executor.1 Not tainted 5.3+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:cbq_normalize_quanta.part.0+0x1fd/0x430 net/sched/sch_cbq.c:902 RSP: 0018:ffff8801a5c333b0 EFLAGS: 00010206 RAX: 0000000020000003 RBX: 00000000fffffff8 RCX: ffffc9000712f000 RDX: 00000000000043bf RSI: ffffffff83be8962 RDI: 0000000100000018 RBP: ffff8801a5c33420 R08: 000000000000003a R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 00000000000002ef R13: ffff88018da95188 R14: dffffc0000000000 R15: 0000000000000015 FS: 00007f37d26b1700(0000) GS:ffff8801dad00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004c7cec CR3: 00000001bcd0a006 CR4: 00000000001626f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: [<ffffffff83be9d57>] cbq_normalize_quanta include/net/pkt_sched.h:27 [inline] [<ffffffff83be9d57>] cbq_addprio net/sched/sch_cbq.c:1097 [inline] [<ffffffff83be9d57>] cbq_set_wrr+0x2d7/0x450 net/sched/sch_cbq.c:1115 [<ffffffff83bee8a7>] cbq_change_class+0x987/0x225b net/sched/sch_cbq.c:1537 [<ffffffff83b96985>] tc_ctl_tclass+0x555/0xcd0 net/sched/sch_api.c:2329 [<ffffffff83a84655>] rtnetlink_rcv_msg+0x485/0xc10 net/core/rtnetlink.c:5248 [<ffffffff83cadf0a>] netlink_rcv_skb+0x17a/0x460 net/netlink/af_netlink.c:2510 [<ffffffff83a7db6d>] rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5266 [<ffffffff83cac2c6>] netlink_unicast_kernel net/netlink/af_netlink.c:1324 [inline] [<ffffffff83cac2c6>] netlink_unicast+0x536/0x720 net/netlink/af_netlink.c:1350 [<ffffffff83cacd4a>] netlink_sendmsg+0x89a/0xd50 net/netlink/af_netlink.c:1939 [<ffffffff8399d46e>] sock_sendmsg_nosec net/socket.c:673 [inline] [<ffffffff8399d46e>] sock_sendmsg+0x12e/0x170 net/socket.c:684 [<ffffffff8399f1fd>] ___sys_sendmsg+0x81d/0x960 net/socket.c:2359 [<ffffffff839a2d05>] __sys_sendmsg+0x105/0x1d0 net/socket.c:2397 [<ffffffff839a2df9>] SYSC_sendmsg net/socket.c:2406 [inline] [<ffffffff839a2df9>] SyS_sendmsg+0x29/0x30 net/socket.c:2404 [<ffffffff8101ccc8>] do_syscall_64+0x528/0x770 arch/x86/entry/common.c:305 [<ffffffff84400091>] entry_SYSCALL_64_after_hwframe+0x42/0xb7 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: syzbot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-09-30net: dsa: qca8k: Use up to 7 ports for all operationsMichal Vokáč1-2/+2
The QCA8K family supports up to 7 ports. So use the existing QCA8K_NUM_PORTS define to allocate the switch structure and limit all operations with the switch ports. This was not an issue until commit 0394a63acfe2 ("net: dsa: enable and disable all ports") disabled all unused ports. Since the unused ports 7-11 are outside of the correct register range on this switch some registers were rewritten with invalid content. Fixes: 6b93fb46480a ("net-next: dsa: add new driver for qca8xxx family") Fixes: a0c02161ecfc ("net: dsa: variable number of ports") Fixes: 0394a63acfe2 ("net: dsa: enable and disable all ports") Signed-off-by: Michal Vokáč <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-09-30Linux 5.4-rc1Linus Torvalds1-2/+2
Powered by cgit, Gruvboxed by Blaster4385.