aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-12-16ethtool: fix string set id checkMichal Kubecek1-1/+1
Syzbot reported a shift of a u32 by more than 31 in strset_parse_request() which is undefined behavior. This is caused by range check of string set id using variable ret (which is always 0 at this point) instead of id (string set id from request). Fixes: 71921690f974 ("ethtool: provide string sets with STRSET_GET request") Reported-by: [email protected] Signed-off-by: Michal Kubecek <[email protected]> Link: https://lore.kernel.org/r/b54ed5c5fd972a59afea3e1badfb36d86df68799.1607952208.git.mkubecek@suse.cz Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-16Merge tag 'Smack-for-5.11' of git://github.com/cschaufler/smack-nextLinus Torvalds2-5/+5
Pull smack updates from Casey Schaufler: "There are no functional changes. Just one minor code clean-up and a set of corrections in function header comments" * tag 'Smack-for-5.11' of git://github.com/cschaufler/smack-next: security/smack: remove unused varible 'rc' Smack: fix kernel-doc interface on functions
2020-12-16net: mscc: ocelot: Fix a resource leak in the error handling path of the ↵Christophe JAILLET1-1/+7
probe function In case of error after calling 'ocelot_init()', it must be undone by a corresponding 'ocelot_deinit()' call, as already done in the remove function. Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support") Signed-off-by: Christophe JAILLET <[email protected]> Acked-by: Alexandre Belloni <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-16net/connector: Add const qualifier to cb_idGeoff Levand4-12/+12
The connector driver never modifies any cb_id passed to it, so add a const qualifier to those arguments so callers can declare their struct cb_id as a constant object. Fixes build warnings like these when passing a constant struct cb_id: warning: passing argument 1 of ‘cn_add_callback’ discards ‘const’ qualifier from pointer target Signed-off-by: Geoff Levand <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-16Merge tag 'integrity-v5.11' of ↵Linus Torvalds7-37/+60
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity Pull integrity subsystem updates from Mimi Zohar: "Just three patches here. Other integrity changes are being upstreamed via EFI (defines a common EFI secure and trusted boot IMA policy) and BPF LSM (exporting the IMA file cache hash info based on inode). The three patches included here: - bug fix: fail calculating the file hash, when a file not opened for read and the attempt to re-open it for read fails. - defer processing the "ima_appraise" boot command line option to avoid enabling different modes (e.g. fix, log) to when the secure boot flag is available on arm. - defines "ima-buf" as the default IMA buffer measurement template in preparation for the builtin integrity "critical data" policy" * tag 'integrity-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: ima: Don't modify file descriptor mode on the fly ima: select ima-buf template for buffer measurement ima: defer arch_ima_get_secureboot() call to IMA init time
2020-12-16net: bcmgenet: Fix a resource leak in an error handling path in the probe ↵Christophe JAILLET1-1/+3
functin If the 'register_netdev()' call fails, we must undo a previous 'bcmgenet_mii_init()' call. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Christophe JAILLET <[email protected]> Acked-by: Florian Fainelli <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-16dpaa2-eth: fix the size of the mapped SGT bufferIoana Ciornei1-1/+1
This patch fixes an error condition triggered when the code path which transmits a S/G frame descriptor when the skb's headroom is not enough for DPAA2's needs. We are greated with a splat like the one below when a SGT structure is recycled and that is because even though a dma_unmap is performed on the Tx confirmation path, the unmap is not done with the proper size. [ 714.464927] WARNING: CPU: 13 PID: 0 at drivers/iommu/io-pgtable-arm.c:281 __arm_lpae_map+0x2d4/0x30c (...) [ 714.465343] Call trace: [ 714.465348] __arm_lpae_map+0x2d4/0x30c [ 714.465353] __arm_lpae_map+0x114/0x30c [ 714.465357] __arm_lpae_map+0x114/0x30c [ 714.465362] __arm_lpae_map+0x114/0x30c [ 714.465366] arm_lpae_map+0xf4/0x180 [ 714.465373] arm_smmu_map+0x4c/0xc0 [ 714.465379] __iommu_map+0x100/0x2bc [ 714.465385] iommu_map_atomic+0x20/0x30 [ 714.465391] __iommu_dma_map+0xb0/0x110 [ 714.465397] iommu_dma_map_page+0xb8/0x120 [ 714.465404] dma_map_page_attrs+0x1a8/0x210 [ 714.465413] __dpaa2_eth_tx+0x384/0xbd0 [fsl_dpaa2_eth] [ 714.465421] dpaa2_eth_tx+0x84/0x134 [fsl_dpaa2_eth] [ 714.465427] dev_hard_start_xmit+0x10c/0x2b0 [ 714.465433] sch_direct_xmit+0x1a0/0x550 (...) The dpaa2-eth driver uses an area of software annotations to transmit necessary information from the Tx path to the Tx confirmation one. This SWA structure has a different layout for each kind of frame that we are dealing with: linear, S/G or XDP. The commit referenced was incorrectly setting up the 'sgt_size' field for the S/G type of SWA even though we are dealing with a linear skb here. Fixes: d70446ee1f40 ("dpaa2-eth: send a scatter-gather FD instead of realloc-ing") Reported-by: Daniel Thompson <[email protected]> Tested-by: Daniel Thompson <[email protected]> Signed-off-by: Ioana Ciornei <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-16Merge tag 'selinux-pr-20201214' of ↵Linus Torvalds35-77/+101
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull selinux updates from Paul Moore: "While we have a small number of SELinux patches for v5.11, there are a few changes worth highlighting: - Change the LSM network hooks to pass flowi_common structs instead of the parent flowi struct as the LSMs do not currently need the full flowi struct and they do not have enough information to use it safely (missing information on the address family). This patch was discussed both with Herbert Xu (representing team netdev) and James Morris (representing team LSMs-other-than-SELinux). - Fix how we handle errors in inode_doinit_with_dentry() so that we attempt to properly label the inode on following lookups instead of continuing to treat it as unlabeled. - Tweak the kernel logic around allowx, auditallowx, and dontauditx SELinux policy statements such that the auditx/dontauditx are effective even without the allowx statement. Everything passes our test suite" * tag 'selinux-pr-20201214' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: lsm,selinux: pass flowi_common instead of flowi to the LSM hooks selinux: Fix fall-through warnings for Clang selinux: drop super_block backpointer from superblock_security_struct selinux: fix inode_doinit_with_dentry() LABEL_INVALID error handling selinux: allow dontauditx and auditallowx rules to take effect without allowx selinux: fix error initialization in inode_doinit_with_dentry()
2020-12-16net: dsa: qca: ar9331: fix sleeping function called from invalid context bugOleksij Rempel1-9/+24
With lockdep enabled, we will get following warning: ar9331_switch ethernet.1:10 lan0 (uninitialized): PHY [!ahb!ethernet@1a000000!mdio!switch@10:00] driver [Qualcomm Atheros AR9331 built-in PHY] (irq=13) BUG: sleeping function called from invalid context at kernel/locking/mutex.c:935 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 18, name: kworker/0:1 INFO: lockdep is turned off. irq event stamp: 602 hardirqs last enabled at (601): [<8073fde0>] _raw_spin_unlock_irq+0x3c/0x80 hardirqs last disabled at (602): [<8073a4f4>] __schedule+0x184/0x800 softirqs last enabled at (0): [<80080f60>] copy_process+0x578/0x14c8 softirqs last disabled at (0): [<00000000>] 0x0 CPU: 0 PID: 18 Comm: kworker/0:1 Not tainted 5.10.0-rc3-ar9331-00734-g7d644991df0c #31 Workqueue: events deferred_probe_work_func Stack : 80980000 80980000 8089ef70 80890000 804b5414 80980000 00000002 80b53728 00000000 800d1268 804b5414 ffffffde 00000017 800afe08 81943860 0f5bfc32 00000000 00000000 8089ef70 819436c0 ffffffea 00000000 00000000 00000000 8194390c 808e353c 0000000f 66657272 80980000 00000000 00000000 80890000 804b5414 80980000 00000002 80b53728 00000000 00000000 00000000 80d40000 ... Call Trace: [<80069ce0>] show_stack+0x9c/0x140 [<800afe08>] ___might_sleep+0x220/0x244 [<8073bfb0>] __mutex_lock+0x70/0x374 [<8073c2e0>] mutex_lock_nested+0x2c/0x38 [<804b5414>] regmap_update_bits_base+0x38/0x8c [<804ee584>] regmap_update_bits+0x1c/0x28 [<804ee714>] ar9331_sw_unmask_irq+0x34/0x60 [<800d91f0>] unmask_irq+0x48/0x70 [<800d93d4>] irq_startup+0x114/0x11c [<800d65b4>] __setup_irq+0x4f4/0x6d0 [<800d68a0>] request_threaded_irq+0x110/0x190 [<804e3ef0>] phy_request_interrupt+0x4c/0xe4 [<804df508>] phylink_bringup_phy+0x2c0/0x37c [<804df7bc>] phylink_of_phy_connect+0x118/0x130 [<806c1a64>] dsa_slave_create+0x3d0/0x578 [<806bc4ec>] dsa_register_switch+0x934/0xa20 [<804eef98>] ar9331_sw_probe+0x34c/0x364 [<804eb48c>] mdio_probe+0x44/0x70 [<8049e3b4>] really_probe+0x30c/0x4f4 [<8049ea10>] driver_probe_device+0x264/0x26c [<8049bc10>] bus_for_each_drv+0xb4/0xd8 [<8049e684>] __device_attach+0xe8/0x18c [<8049ce58>] bus_probe_device+0x48/0xc4 [<8049db70>] deferred_probe_work_func+0xdc/0xf8 [<8009ff64>] process_one_work+0x2e4/0x4a0 [<800a0770>] worker_thread+0x2a8/0x354 [<800a774c>] kthread+0x16c/0x174 [<8006306c>] ret_from_kernel_thread+0x14/0x1c ar9331_switch ethernet.1:10 lan1 (uninitialized): PHY [!ahb!ethernet@1a000000!mdio!switch@10:02] driver [Qualcomm Atheros AR9331 built-in PHY] (irq=13) DSA: tree 0 setup To fix it, it is better to move access to MDIO register to the .irq_bus_sync_unlock call back. Fixes: ec6698c272de ("net: dsa: add support for Atheros AR9331 built-in switch") Signed-off-by: Oleksij Rempel <[email protected]> Reviewed-by: Vladimir Oltean <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-16ACPI: PM: s2idle: Add AMD support to handle _DSMShyam Sundar S K1-9/+157
Initial support for S2Idle based on the Intel implementation [1] does not work for AMD as the BIOS implementation for ACPI methods like the _DSM are not standardized. So, the way in which the UUID's were parsed and the ACPI packages were retrieved out of the ACPI objects are not the same between Intel and AMD. Add AMD support for S2Idle to parse the UUID, evaluate the _DSM methods, prepare the Idle constraint list etc. Link: https://uefi.org/sites/default/files/resources/Intel_ACPI_Low_Power_S0_Idle.pdf # [1] Signed-off-by: Shyam Sundar S K <[email protected]> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-12-16Merge tag 'audit-pr-20201214' of ↵Linus Torvalds4-42/+18
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit Pull audit updates from Paul Moore: "A small set of audit patches for v5.11 with four patches in total and only one of any real significance. Richard's patch to trigger accompanying records causes the kernel to emit additional related records when an audit event occurs; helping provide some much needed context to events in the audit log. It is also worth mentioning that this is a revised patch based on an earlier attempt that had to be reverted in the v5.8 time frame. Everything passes our test suite, and with no problems reported please merge this for v5.11" * tag 'audit-pr-20201214' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: audit: replace atomic_add_return() audit: fix macros warnings audit: trigger accompanying records when no rules present audit: fix a kernel-doc markup
2020-12-16Merge branch 'i40e-ice-af_xdp-zc-fixes'Jakub Kicinski2-2/+8
Björn Töpel says: ==================== i40e/ice AF_XDP ZC fixes This series address two crashes in the AF_XDP zero-copy mode for ice and i40e. More details in each individual the commit message. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-16i40e, xsk: clear the status bits for the next_to_use descriptorBjörn Töpel1-1/+4
On the Rx side, the next_to_use index points to the next item in the HW ring to be refilled/allocated, and next_to_clean points to the next item to potentially be processed. When the HW Rx ring is fully refilled, i.e. no packets has been processed, the next_to_use will be next_to_clean - 1. When the ring is fully processed next_to_clean will be equal to next_to_use. The latter case is where a bug is triggered. If the next_to_use bits are not cleared, and the "fully processed" state is entered, a stale descriptor can be processed. The skb-path correctly clear the status bit for the next_to_use descriptor, but the AF_XDP zero-copy path did not do that. This change adds the status bits clearing of the next_to_use descriptor. Fixes: 3b4f0b66c2b3 ("i40e, xsk: Migrate to new MEM_TYPE_XSK_BUFF_POOL") Signed-off-by: Björn Töpel <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-16ice, xsk: clear the status bits for the next_to_use descriptorBjörn Töpel1-1/+4
On the Rx side, the next_to_use index points to the next item in the HW ring to be refilled/allocated, and next_to_clean points to the next item to potentially be processed. When the HW Rx ring is fully refilled, i.e. no packets has been processed, the next_to_use will be next_to_clean - 1. When the ring is fully processed next_to_clean will be equal to next_to_use. The latter case is where a bug is triggered. If the next_to_use bits are not cleared, and the "fully processed" state is entered, a stale descriptor can be processed. The skb-path correctly clear the status bit for the next_to_use descriptor, but the AF_XDP zero-copy path did not do that. This change adds the status bits clearing of the next_to_use descriptor. Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Signed-off-by: Björn Töpel <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-16Merge tag 'printk-for-5.11' of ↵Linus Torvalds7-137/+200
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk updates from Petr Mladek: - Finally allow parallel writes and reads into/from the lockless ringbuffer. But it is not a complete solution. Readers are still serialized against each other. And nested writes are still prevented by printk_safe per-CPU buffers. - Use ttynull as the ultimate fallback for /dev/console. - Officially allow disabling console output by using console="" or console=null - A few code cleanups * tag 'printk-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: printk: remove logbuf_lock writer-protection of ringbuffer printk: inline log_output(),log_store() in vprintk_store() printk: remove obsolete dead assignment printk/console: Allow to disable console output by using console="" or console=null init/console: Use ttynull as a fallback when there is no console printk: ringbuffer: Reference text_data_ring directly in callees.
2020-12-16drm/amdgpu/disply: fix documentation warnings in display managerAlex Deucher1-1/+20
Add documentation for crc window. Fixes: c920888c604d ("drm/amd/display: Expose new CRC window property") Signed-off-by: Alex Deucher <[email protected]> Cc: Wayne Lin <[email protected]> Reported-by: Stephen Rothwell <[email protected]> Reviewed-by: Wayne Lin <[email protected]>
2020-12-16drm/amdgpu: print mmhub client name for dimgrey_cavefishTao Zhou1-0/+1
This makes it easier to debug what block is causing the fault, same as sienna_cichlid. Signed-off-by: Tao Zhou <[email protected]> Reviewed-by: Jiansong Chen <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-12-16drm/amdgpu: set mode1 reset as default for dimgrey_cavefishTao Zhou1-0/+1
Use mode1 reset for dimgrey_cavefish by default. Signed-off-by: Tao Zhou <[email protected]> Reviewed-by: Jiansong Chen <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-12-16drm/amd/display: Add get_dig_frontend implementation for DCExRodrigo Siqueira2-1/+43
Some old ASICs might not implement/require get_dig_frontend helper; in this scenario, we can have a NULL pointer exception when we try to call it inside vbios disable operation. For example, this situation might happen when using Polaris12 with an eDP panel. This commit avoids this situation by adding a specific get_dig_frontend implementation for DCEx. Cc: Alex Deucher <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Harry Wentland <[email protected]> Cc: Nicholas Kazlauskas <[email protected]> Cc: Chiawen Huang <[email protected]> Reported-and-tested-by: Borislav Petkov <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2020-12-16KVM: SVM: fix 32-bit compilationPaolo Bonzini1-0/+2
VCPU_REGS_R8...VCPU_REGS_R15 are not defined on 32-bit x86, so cull them from the synchronization of the VMSA. Signed-off-by: Paolo Bonzini <[email protected]>
2020-12-16Merge tags 'spi-nor/for-5.11' and 'nand/for-5.11' into mtd/nextMiquel Raynal2235-41328/+32614
SPI NOR core changes: - Initial support for stateful Octal DTR mode using volatile settings - Preliminary support for JEDEC 251 (xSPI) and JEDEC 216D standards - Support for Cypress Semper flash - Support to specify ECC block size of SPI NOR flashes - Fixes to avoid clearing of non-volatile Block Protection bits at probe Generic NAND core: * ECC management: - Add an I/O request tweaking mechanism - Entire rework of the software BCH ECC driver, creation of a real ECC engine, getting rid of raw NAND structures, migration to more generic prototypes, misc fixes and style cleanup. Moved now to the Generic NAND layer. - Entire rework of the software Hamming ECC driver, creation of a real ECC engine, getting rid of raw NAND structures, misc renames, comment updates, cleanup, and style fixes. Moved now to the generic NAND layer. - Necessary plumbing at the NAND level to retrieve generic NAND ECC engines (softwares and on-die). - Update of the bindings. Raw NAND core: * Geting rid of the chip->ecc.priv entry. * Fix miscellaneous typos in kernel-doc Raw NAND controller drivers: * AU1550: Ensure the presence of the right includes * Davinci: Do not use extra dereferencing * GPMI: - Fix the driver only sense CS0 R/B issue - Fix the random DMA timeout issue - Use a single line for of_device_id - Use of_device_get_match_data() - Fix reference count leak in gpmi ops - Cleanup makefile - Fix binding matching of clocks on different SoCs * Ingenic: remove redundant get_device() in ingenic_ecc_get() * Intel LGM: New NAND controller driver * Marvell: Drop useless line * Meson: - Fix a resource leak in init - Fix meson_nfc_dma_buffer_release() arguments * mxc: - Use device_get_match_data() - Use a single line for of_device_id - Remove platform data support * Qcom: - Add support for SDX55 - Support for IPQ6018 QPIC NAND controller - Fix DMA sync on FLASH_STATUS register read * Rockchip: New NAND controller driver for RK3308, RK2928 and others * Sunxi: Add MDMA support SPI-NAND core: * Creation of a SPI-NAND on-die ECC engine * Move ECC related definitions earlier in the driver * Fix typo in comment * Fill a default ECC provider/algorithm * Remove outdated comment * Fix OOB read * Allow the case where there is no ECC engine * Use the external ECC engine logic SPI-NAND chip drivers: * Micron: - Add support for MT29F2G01AAAED - Use more specific names * Macronix: - Add support for MX35LFxG24AD - Add support for MX35LFxGE4AD Others: * onenand: Use mtd->oops_panic_write as condition * plat-ram: correctly free memory on error path in platram_probe()
2020-12-16lan743x: fix rx_napi_poll/interrupt ping-pongSven Van Asbroeck1-20/+23
Even if there is more rx data waiting on the chip, the rx napi poll fn will never run more than once - it will always read a few buffers, then bail out and re-arm interrupts. Which results in ping-pong between napi and interrupt. This defeats the purpose of napi, and is bad for performance. Fix by making the rx napi poll behave identically to other ethernet drivers: 1. initialize rx napi polling with an arbitrary budget (64). 2. in the polling fn, return full weight if rx queue is not depleted, this tells the napi core to "keep polling". 3. update the rx tail ("ring the doorbell") once for every 8 processed rx ring buffers. Thanks to Jakub Kicinski, Eric Dumazet and Andrew Lunn for their expert opinions and suggestions. Tested with 20 seconds of full bandwidth receive (iperf3): rx irqs softirqs(NET_RX) ----------------------------- before 23827 33620 after 129 4081 Tested-by: Sven Van Asbroeck <[email protected]> # lan7430 Fixes: 23f0703c125be ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Sven Van Asbroeck <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-16ALSA: hda/realtek: Remove dummy lineout on Acer TravelMate P648/P658Chris Chiu1-0/+27
Acer TravelMate laptops P648/P658 series with codec ALC282 only have one physical jack for headset but there's a confusing lineout pin on NID 0x1b reported. Audio applications hence misunderstand that there are a speaker and a lineout, and take the lineout as the default audio output. Add a new quirk to remove the useless lineout and enable the pin 0x18 for jack sensing and headset microphone. Signed-off-by: Chris Chiu <[email protected]> Signed-off-by: Jian-Hong Pan <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2020-12-16s390/zcrypt: convert comma to semicolonZheng Yongjun2-2/+2
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <[email protected]> Signed-off-by: Harald Freudenberger <[email protected]> Signed-off-by: Heiko Carstens <[email protected]>
2020-12-16s390/idle: allow arch_cpu_idle() to be kprobedHeiko Carstens1-2/+0
Remove NOKPROBE_SYMBOL() for arch_cpu_idle(). This might have made sense when enabled_wait() (aka arch_cpu_idle()) was called from udelay. But now there shouldn't be a reason why s390 should be the only architecture which doesn't allow arch_cpu_idle() to be probed. Signed-off-by: Heiko Carstens <[email protected]>
2020-12-16s390/idle: remove raw_local_irq_save()/restore() from arch_cpu_idle()Heiko Carstens1-5/+2
arch_cpu_idle() gets called with interrupts disabled, and psw_idle() returns with interrupts disabled. No reason to use raw_local_irq_save() / restore(). Signed-off-by: Heiko Carstens <[email protected]>
2020-12-16s390/idle: merge enabled_wait() and arch_cpu_idle()Heiko Carstens2-13/+3
The only caller of enabled_wait() besides arch_cpu_idle() was udelay(). Since that call doesn't exist anymore, merge enabled_wait() and arch_cpu_idle(). Signed-off-by: Heiko Carstens <[email protected]>
2020-12-16s390/delay: remove udelay_simple()Heiko Carstens5-33/+8
udelay_simple() callers can make use of the now simplified udelay() implementation. No need to keep it. Signed-off-by: Heiko Carstens <[email protected]>
2020-12-16s390/irq: select HAVE_IRQ_EXIT_ON_IRQ_STACKHeiko Carstens1-0/+1
irq_exit() is always called on async stack. Therefore select HAVE_IRQ_EXIT_ON_IRQ_STACK and get a tiny optimization in invoke_softirq(). Signed-off-by: Heiko Carstens <[email protected]>
2020-12-16s390/delay: simplify udelayHeiko Carstens4-94/+23
udelay is implemented by using quite subtle details to make it possible to load an idle psw and waiting for an interrupt even in irq context or when interrupts are disabled. Also handling (or better: no handling) of softirqs is taken into account. All this is done to optimize for something which should in normal circumstances never happen: calling udelay to busy wait. Therefore get rid of the whole complexity and just busy loop like other architectures are doing it also. It could have been possible to use diag 0x44 instead of cpu_relax() in the busy loop, however we have seen too many bad things happen with diag 0x44 that it seems to be better to simply busy loop. Also note that with this new implementation kernel preemption does work when within the udelay loop. This did not work before. To get a feeling what the former code optimizes for: IPL'ing a kernel with 'defconfig' and afterwards compiling a kernel ends with a total of zero udelay calls. Signed-off-by: Heiko Carstens <[email protected]>
2020-12-16s390/test_unwind: use timer instead of udelayHeiko Carstens1-14/+10
Instead of registering an external interrupt handler and relying on the udelay implementation, simply use a timer to get into irq context. Acked-by: Ilya Leoshkevich <[email protected]> Signed-off-by: Heiko Carstens <[email protected]>
2020-12-16s390/test_unwind: fix CALL_ON_STACK testsHeiko Carstens1-2/+5
The CALL_ON_STACK tests use the no_dat stack to switch to a different stack for unwinding tests. If an interrupt or machine check happens while using that stack, and previously being on the async stack, the interrupt / machine check entry code (SWITCH_ASYNC) will assume that the previous context did not use the async stack and happily use the async stack again. This will lead to stack corruption of the previous context. To solve this disable both interrupts and machine checks before switching to the no_dat stack. Fixes: 7868249fbbc8 ("s390/test_unwind: add CALL_ON_STACK tests") Signed-off-by: Heiko Carstens <[email protected]>
2020-12-16s390: make calls to TRACE_IRQS_OFF/TRACE_IRQS_ON balancedHeiko Carstens1-2/+2
In case of udelay CIF_IGNORE_IRQ is set. This leads to an unbalanced call of TRACE_IRQS_OFF and TRACE_IRQS_ON. That is: from lockdep's point of view TRACE_IRQS_ON is called one time too often. This doesn't fix any real bug, just makes the calls balanced. Signed-off-by: Heiko Carstens <[email protected]>
2020-12-16s390: always clear kernel stack backchain before calling functionsHeiko Carstens1-6/+6
Clear the kernel stack backchain before potentially calling the lockdep trace_hardirqs_off/on functions. Without this walking the kernel backchain, e.g. during a panic, might stop too early. Signed-off-by: Heiko Carstens <[email protected]>
2020-12-16char: ipmi: convert comma to semicolonZheng Yongjun1-3/+3
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <[email protected]> Message-Id: <[email protected]> Signed-off-by: Corey Minyard <[email protected]>
2020-12-16fs/lockd: convert comma to semicolonZheng Yongjun1-1/+1
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <[email protected]> Signed-off-by: Trond Myklebust <[email protected]>
2020-12-16NFSv4.2: fix error return on memory allocation failureColin Ian King1-0/+1
Currently when an alloc_page fails the error return is not set in variable err and a garbage initialized value is returned. Fix this by setting err to -ENOMEM before taking the error return path. Addresses-Coverity: ("Uninitialized scalar variable") Fixes: a1f26739ccdc ("NFSv4.2: improve page handling for GETXATTR") Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: Trond Myklebust <[email protected]>
2020-12-16writeback: don't warn on an unregistered BDI in __mark_inode_dirtyChristoph Hellwig1-4/+0
BDIs get unregistered during device removal, and this WARN can be trivially triggered by hot-removing a NVMe device while running fsx It is otherwise harmless as we still hold a BDI reference, and the writeback has been shut down already. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Jan Kara <[email protected]>
2020-12-16Merge branch 'for-5.11/wacom' into for-linusJiri Kosina1-8/+8
2020-12-16Merge branch 'for-5.11/sony' into for-linusJiri Kosina3-43/+174
- DS4 power and firmware reporting fixes, from Roderick Colenbrander - support for ghlive PS3/WII u dongles, from Pascal Giard
2020-12-16Merge branch 'for-5.11/intel-ish' into for-linusJiri Kosina1-4/+2
2020-12-16Merge branch 'for-5.11/i2c-hid' into for-linusJiri Kosina1-1/+4
- error reporting fix from Coiby Xu
2020-12-16Merge branch 'for-5.11/elecom' into for-linusJiri Kosina8166-163287/+283400
- support for EX-G M-XGL20DLBK device, from YOSHIOKA Takuma
2020-12-16Merge branch 'for-5.11/core' into for-linusJiri Kosina7-6/+82
- increase of maximum HID report size to 16KB in order to support some of the modern devices, from Dean Camera - control interface support for hidraw, from Dean Camera - stylus battery reporting improvement, from Dmitry Torokhov
2020-12-16Merge branch 'for-5.11/asus' into for-linusJiri Kosina2-14/+110
Support for ASUS N-Key keyboard, from Luke D Jones
2020-12-16Merge branch 'for-5.11/amd-sfh-hid' into for-linusJiri Kosina15-0/+1883
From Sandeep Singh. AMD SFH (Sensor Fusion Hub) is HID based driver.SFH FW is part of MP2 processor (MP2 which is an ARM core connected to x86 for processing sensor data) and it runs on MP2 where in the driver resides on X86. The driver functionalities are divided into three parts: 1: amd-mp2-pcie:- This part of the module will communicate with MP2 firmware. MP2 which is exposed as a PCI device to the X86, uses mailboxes to talk to MP2 firmware to send/receive commands. 2: Client Layer:- This part of the driver will use DRAM data and convert the data into HID format based on HID reports. 3: Transport layer :- This part of the driver the will communicate with HID core.Communication between devices and HID core is mostly done via HID reports In terms of architecture, it resembles like ISH (Intel Integrated Sensor Hub). However the major difference is all the hid reports are generated as part of the kernel driver. AMD SFH is integrated as a part of SoC, starting from 17h family of processors. The solution is working well on several OEM products. AMD SFH uses HID over PCIe bus.
2020-12-16Merge tag 'fallthrough-fixes-clang-5.11-rc1' of ↵Linus Torvalds24-78/+86
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull fallthrough fixes from Gustavo A. R. Silva: "Fix many fall-through warnings when building with Clang 12.0.0 using -Wimplicit-fallthrough. - powerpc: boot: include compiler_attributes.h (Nick Desaulniers) - Revert "lib: Revert use of fallthrough pseudo-keyword in lib/" (Nick Desaulniers) - powerpc: fix -Wimplicit-fallthrough (Nick Desaulniers) - lib: Fix fall-through warnings for Clang (Gustavo A. R. Silva)" * tag 'fallthrough-fixes-clang-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: lib: Fix fall-through warnings for Clang powerpc: fix -Wimplicit-fallthrough Revert "lib: Revert use of fallthrough pseudo-keyword in lib/" powerpc: boot: include compiler_attributes.h
2020-12-16Merge tag 'linux-kselftest-kunit-5.11-rc1' of ↵Linus Torvalds6-193/+351
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kunit updates from Shuah Khan: - documentation update and fix to kunit_tool to parse diagnostic messages correctly from David Gow - Support for Parameterized Testing and fs/ext4 test updates to use KUnit parameterized testing feature from Arpitha Raghunandan - Helper to derive file names depending on --build_dir argument from Andy Shevchenko * tag 'linux-kselftest-kunit-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: fs: ext4: Modify inode-test.c to use KUnit parameterized testing feature kunit: Support for Parameterized Testing kunit: kunit_tool: Correctly parse diagnostic messages Documentation: kunit: provide guidance for testing many inputs kunit: Introduce get_file_path() helper
2020-12-16Merge tag 'linux-kselftest-next-5.11-rc1' of ↵Linus Torvalds14-34/+621
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest updates from Shuah Khan: - Much needed gpio test Makefile cleanup to various problems with test dependencies and build errors from Michael Ellerman - Enabling vDSO test on non x86 platforms from Vincenzo Frascino - Fix intel_pstate to replace deprecated ftime() usages with clock_gettime() from Tommi Rantala - cgroup test build fix on older releases from Sachin Sant - A couple of spelling mistake fixes * tag 'linux-kselftest-next-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/cgroup: Fix build on older distros selftests/run_kselftest.sh: fix dry-run typo tool: selftests: fix spelling typo of 'writting' selftests/memfd: Fix implicit declaration warnings selftests: intel_pstate: ftime() is deprecated selftests/gpio: Add to CLEAN rule rather than overriding selftests/gpio: Fix build when source tree is read only selftests/gpio: Move include of lib.mk up selftests/gpio: Use TEST_GEN_PROGS_EXTENDED kselftest: Extend vdso correctness test to clock_gettime64 kselftest: Move test_vdso to the vDSO test suite kselftest: Extend vDSO selftest to clock_getres kselftest: Extend vDSO selftest kselftest: Enable vDSO test on non x86 platforms
2020-12-16Merge tag 'linux-kselftest-fixes-5.11-rc1' of ↵Linus Torvalds2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fixes from Shuah Khan: "Build fixes for clone3 and rseq tests" * tag 'linux-kselftest-fixes-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/clone3: Fix build error rseq/selftests: Fix MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQ build error under other arch.
Powered by cgit, Gruvboxed by Blaster4385.