| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
From 2.43 to 2.44
Signed-off-by: Steve French <[email protected]>
|
|
Dumping the enc/dec keys is a session wide operation.
And it should not matter if the ioctl was run on
a regular file or a directory.
Currently, we obtain the tcon pointer from the
cifs file handle. But since there's no dir open call
in cifs, this is not populated for dirs.
This change allows dumping of session keys using ioctl
even for directories. To do this, we'll now get the
tcon pointer from the superblock, and not from the file
handle.
Signed-off-by: Shyam Prasad N <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- Fix per vma lock fault handling: add missing !(fault & VM_FAULT_ERROR)
check to fault handler to prevent error handling for return values
that don't indicate an error
- Use kfree_sensitive() instead of kfree() in paes crypto code to clear
memory that may contain keys before freeing it
- Fix reply buffer size calculation for CCA replies in zcrypt device
driver
* tag 's390-6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/zcrypt: fix reply buffer calculations for CCA replies
s390/crypto: use kfree_sensitive() instead of kfree()
s390/mm: fix per vma lock fault handling
|
|
Pull block fixes from Jens Axboe:
- Fix for loop regressions (Mauricio)
- Fix a potential stall with batched wakeups in sbitmap (David)
- Fix for stall with recursive plug flushes (Ross)
- Skip accounting of empty requests for blk-iocost (Chengming)
- Remove a dead field in struct blk_mq_hw_ctx (Chengming)
* tag 'block-6.5-2023-07-21' of git://git.kernel.dk/linux:
loop: do not enforce max_loop hard limit by (new) default
loop: deprecate autoloading callback loop_probe()
sbitmap: fix batching wakeup
blk-iocost: skip empty flush bio in iocost
blk-mq: delete dead struct blk_mq_hw_ctx->queued field
blk-mq: Fix stall due to recursive flush plug
|
|
Pull io_uring fixes from Jens Axboe:
- Fix for io-wq not always honoring REQ_F_NOWAIT, if it was set and
punted directly (eg via DRAIN) (me)
- Capability check fix (Ondrej)
- Regression fix for the mmap changes that went into 6.4, which
apparently broke IA64 (Helge)
* tag 'io_uring-6.5-2023-07-21' of git://git.kernel.dk/linux:
ia64: mmap: Consider pgoff when searching for free mapping
io_uring: Fix io_uring mmap() by using architecture-provided get_unmapped_area()
io_uring: treat -EAGAIN for REQ_F_NOWAIT as final for io-wq
io_uring: don't audit the capability check in io_uring_create()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix moortec,mr75203 schema usage of 'multipleOf' keyword
- Fix regression in systems depending on "of-display" device name
- Build fix for s390 with CONFIG_PCI=n and OF_EARLY_FLATTREE=y
- Drop two obsolete serial .txt bindings
* tag 'devicetree-fixes-for-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: serial: Remove obsolete nxp,lpc1850-uart.txt
dt-bindings: serial: Remove obsolete cavium-uart.txt
dt-bindings: hwmon: moortec,mr75203: fix multipleOf for coefficients
of: Preserve "of-display" device name for compatibility
of: make OF_EARLY_FLATTREE depend on HAS_IOMEM
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fixes from Mark Brown:
"Three fixes here:
- The issues with accounting for register and padding length on raw
buses turn out to be quite widespread in custom buses.
In order to avoid disturbing anything drop the initial fixes and
fall back to a point fix in the SMBus code where the issue was
originally noticed, a more substantial refactoring of the API which
ensures that all buses make the same assumptions will follow.
- The generic regcache code had been forcing on async I/O which did
not work with the new maple tree sync code when used with SPI.
Since that was mainly for the rbtree cache and the assumptions
about hardware that drove the choice are probably not true any more
fix this by pushing the enablement of async down into the rbtree
code.
This probably also makes cache syncs for systems faster though it's
not the point.
- The test code was triggering use of the rbtree and maple tree
caches with dynamic allocation of nodes since all the testing is
with RAM backed caches with no I/O performance issues.
Just disable the locking in the tests to avoid triggering warnings
when allocation debugging is turned on, it's not really what's
being tested"
* tag 'regmap-fix-v6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Disable locking for RBTREE and MAPLE unit tests
regcache: Push async I/O request down into the rbtree cache
regmap: Account for register length in SMBus I/O limits
regmap: Drop initial version of maximum transfer length fixes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix initial value handling for output-only pins in gpio-tps68470
- fix two resource leaks in gpio-mvebu
* tag 'gpio-fixes-for-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: mvebu: fix irq domain leak
gpio: mvebu: Make use of devm_pwmchip_add
gpio: tps68470: Make tps68470_gpio_output() always set the initial value
|
|
nxp,lpc1850-uart.txt binding is already covered by 8250.yaml, so remove
it.
Reviewed-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring <[email protected]>
|
|
cavium-uart.txt binding is already covered by 8250.yaml, so remove it.
Reviewed-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring <[email protected]>
|
|
Problem:
The max_loop parameter is used for 2 different purposes:
1) initial number of loop devices to pre-create on init
2) maximum number of loop devices to add on access/open()
Historically, its default value (zero) caused 1) to create non-zero
number of devices (CONFIG_BLK_DEV_LOOP_MIN_COUNT), and no hard limit on
2) to add devices with autoloading.
However, the default value changed in commit 85c50197716c ("loop: Fix
the max_loop commandline argument treatment when it is set to 0") to
CONFIG_BLK_DEV_LOOP_MIN_COUNT, for max_loop=0 not to pre-create devices.
That does improve 1), but unfortunately it breaks 2), as the default
behavior changed from no-limit to hard-limit.
Example:
For example, this userspace code broke for N >= CONFIG, if the user
relied on the default value 0 for max_loop:
mknod("/dev/loopN");
open("/dev/loopN"); // now fails with ENXIO
Though affected users may "fix" it with (loop.)max_loop=0, this means to
require a kernel parameter change on stable kernel update (that commit
Fixes: an old commit in stable).
Solution:
The original semantics for the default value in 2) can be applied if the
parameter is not set (ie, default behavior).
This still keeps the intended function in 1) and 2) if set, and that
commit's intended improvement in 1) if max_loop=0.
Before 85c50197716c:
- default: 1) CONFIG devices 2) no limit
- max_loop=0: 1) CONFIG devices 2) no limit
- max_loop=X: 1) X devices 2) X limit
After 85c50197716c:
- default: 1) CONFIG devices 2) CONFIG limit (*)
- max_loop=0: 1) 0 devices (*) 2) no limit
- max_loop=X: 1) X devices 2) X limit
This commit:
- default: 1) CONFIG devices 2) no limit (*)
- max_loop=0: 1) 0 devices 2) no limit
- max_loop=X: 1) X devices 2) X limit
Future:
The issue/regression from that commit only affects code under the
CONFIG_BLOCK_LEGACY_AUTOLOAD deprecation guard, thus the fix too is
contained under it.
Once that deprecated functionality/code is removed, the purpose 2) of
max_loop (hard limit) is no longer in use, so the module parameter
description can be changed then.
Tests:
Linux 6.4-rc7
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLOCK_LEGACY_AUTOLOAD=y
- default (original)
# ls -1 /dev/loop*
/dev/loop-control
/dev/loop0
...
/dev/loop7
# ./test-loop
open: /dev/loop8: No such device or address
- default (patched)
# ls -1 /dev/loop*
/dev/loop-control
/dev/loop0
...
/dev/loop7
# ./test-loop
#
- max_loop=0 (original & patched):
# ls -1 /dev/loop*
/dev/loop-control
# ./test-loop
#
- max_loop=8 (original & patched):
# ls -1 /dev/loop*
/dev/loop-control
/dev/loop0
...
/dev/loop7
# ./test-loop
open: /dev/loop8: No such device or address
- max_loop=0 (patched; CONFIG_BLOCK_LEGACY_AUTOLOAD is not set)
# ls -1 /dev/loop*
/dev/loop-control
# ./test-loop
open: /dev/loop8: No such device or address
Fixes: 85c50197716c ("loop: Fix the max_loop commandline argument treatment when it is set to 0")
Signed-off-by: Mauricio Faria de Oliveira <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
The 'probe' callback in __register_blkdev() is only used under the
CONFIG_BLOCK_LEGACY_AUTOLOAD deprecation guard.
The loop_probe() function is only used for that callback, so guard it
too, accordingly.
See commit fbdee71bb5d8 ("block: deprecate autoloading based on dev_t").
Signed-off-by: Mauricio Faria de Oliveira <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Current code supposes that it is enough to provide forward progress by
just waking up one wait queue after one completion batch is done.
Unfortunately this way isn't enough, cause waiter can be added to wait
queue just after it is woken up.
Follows one example(64 depth, wake_batch is 8)
1) all 64 tags are active
2) in each wait queue, there is only one single waiter
3) each time one completion batch(8 completions) wakes up just one
waiter in each wait queue, then immediately one new sleeper is added
to this wait queue
4) after 64 completions, 8 waiters are wakeup, and there are still 8
waiters in each wait queue
5) after another 8 active tags are completed, only one waiter can be
wakeup, and the other 7 can't be waken up anymore.
Turns out it isn't easy to fix this problem, so simply wakeup enough
waiters for single batch.
Cc: Kemeng Shi <[email protected]>
Cc: Chengming Zhou <[email protected]>
Cc: Jan Kara <[email protected]>
Signed-off-by: David Jeffery <[email protected]>
Signed-off-by: Ming Lei <[email protected]>
Reviewed-by: Gabriel Krisman Bertazi <[email protected]>
Reviewed-by: Keith Busch <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"I've picked up a handful of arm64 fixes while Catalin's been away, so
here they are. Below is the usual summary, but we have basically have
two cleanups, a fix for an SME crash and a fix for hibernation:
- Fix saving of SME state after SVE vector length is changed
- Fix sparse warnings for missing vDSO function prototypes
- Fix hibernation resume path when kfence is enabled
- Fix field names for the HFGxTR_EL2 register"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/fpsimd: Ensure SME storage is allocated after SVE VL changes
arm64: vdso: Clear common make C=2 warnings
arm64: mm: Make hibernation aware of KFENCE
arm64: Fix HFGxTR_EL2 field naming
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"Revert three recent intel_idle commits that introduced a functional
issue, included a coding mistake and have been questioned at the
design level"
* tag 'pm-6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "intel_idle: Add support for using intel_idle in a VM guest using just hlt"
Revert "intel_idle: Add a "Long HLT" C1 state for the VM guest mode"
Revert "intel_idle: Add __init annotation to matchup_vm_state_with_baremetal()"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A pile of fixes that have been gathered since the previous pull. Most
of changes are device-specific, and nothing looks too scary.
- A memory leak fix in ALSA sequencer code in 6.5-rc
- Many fixes for ASoC Qualcomm CODEC drivers, covering SoundWire
probe problems
- A series of ASoC AMD fixes
- A few fixes and cleanups of selftest stuff
- HD-audio codec fixes and quirks for Clevo, HP, Lenovo, Dell"
* tag 'sound-6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (52 commits)
ALSA: hda/realtek: Add support for DELL Oasis 13/14/16 laptops
ALSA: hda/realtek: Fix generic fixup definition for cs35l41 amp
ALSA: hda/realtek: Enable Mute LED on HP Laptop 15s-eq2xxx
selftests: ALSA: Add test-pcmtest-driver to .gitignore
ALSA: hda/realtek: Add quirk for Clevo NS70AU
ASoC: fsl_sai: Disable bit clock with transmitter
ALSA: seq: Fix memory leak at error path in snd_seq_create_port()
ASoC: SOF: ipc3-dtrace: uninitialized data in dfsentry_trace_filter_write()
ASoC: cs42l51: fix driver to properly autoload with automatic module loading
MAINTAINERS: Redo addition of ssm3515 to APPLE SOUND
ASoC: rt5640: Fix the issue of speaker noise
ALSA: hda/realtek - remove 3k pull low procedure
selftests: ALSA: Fix fclose on an already fclosed file pointer
ALSA: pcmtest: Don't use static storage to track per device data
ALSA: pcmtest: Convert to platform remove callback returning void
ASoC: dt-bindings: audio-graph-card2: Drop incomplete example
ASoC: dt-bindings: Update maintainer email id
ASoC: amd: ps: Fix extraneous error messages
ASoC: fsl_sai: Revert "ASoC: fsl_sai: Enable MCTL_MCLK_EN bit for master mode"
ASoC: codecs: SND_SOC_WCD934X should select REGMAP_IRQ
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes and cleanups from Helge Deller:
"Just the usual bunch of code cleanups in various drivers, this time
mostly in vgacon and imxfb:
- Code cleanup in vgacon (Jiri Slaby)
- Explicitly include correct DT includes (Rob Herring)
- imxfb code cleanup (Yangtao Li, Martin Kaiser)
- kyrofb: make arrays const and smaller (Colin Ian King)
- ep93xx-fb: return value check fix (Yuanjun Gong)
- au1200fb: add missing IRQ check (Zhang Shurong)"
* tag 'fbdev-for-6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: Explicitly include correct DT includes
fbdev: ep93xx-fb: fix return value check in ep93xxfb_probe
fbdev: au1200fb: Fix missing IRQ check in au1200fb_drv_probe
fbdev: kyro: make some const read-only arrays static and reduce type size
fbcon: remove unused display (p) from fbcon_redraw()
sticon: make sticon_set_def_font() void and remove op parameter
vgacon: cache vc_cell_height in vgacon_cursor()
vgacon: let vgacon_doresize() return void
vgacon: remove unused xpos from vgacon_set_cursor_size()
vgacon: remove unneeded forward declarations
vgacon: switch vgacon_scrolldelta() and vgacon_restore_screen()
fbdev: imxfb: remove unneeded labels
fbdev: imxfb: Convert to devm_platform_ioremap_resource()
fbdev: imxfb: Convert to devm_kmalloc_array()
fbdev: imxfb: Removed unneeded release_mem_region
fbdev: imxfb: switch to DEFINE_SIMPLE_DEV_PM_OPS
fbdev: imxfb: warn about invalid left/right margin
|
|
This requires a bit of background. Properly done a modeset driver's
unload/remove sequence should be
drm_dev_unplug();
drm_atomic_helper_shutdown();
drm_dev_put();
The trouble is that the drm_dev_unplugged() checks are by design racy,
they do not synchronize against all outstanding ioctl. This is because
those ioctl could block forever (both for modeset and for driver
specific ioctls), leading to deadlocks in hotunplug. Instead the code
sections that touch the hardware need to be annotated with
drm_dev_enter/exit, to avoid accessing hardware resources after the
unload/remove has finished.
To avoid use-after-free issues all the involved userspace visible
objects are supposed to hold a reference on the underlying drm_device,
like drm_file does.
The issue now is that we missed one, the atomic modeset ioctl can be run
in a nonblocking fashion, and in that case it cannot rely on the implied
drm_device reference provided by the ioctl calling context. This can
result in a use-after-free if an nonblocking atomic commit is carefully
raced against a driver unload.
Fix this by unconditionally grabbing a drm_device reference for any
drm_atomic_state structures. Strictly speaking this isn't required for
blocking commits and TEST_ONLY calls, but it's the simpler approach.
Thanks to shanzhulig for the initial idea of grabbing an unconditional
reference, I just added comments, a condensed commit message and fixed a
minor potential issue in where exactly we drop the final reference.
Reported-by: shanzhulig <[email protected]>
Suggested-by: shanzhulig <[email protected]>
Reviewed-by: Maxime Ripard <[email protected]>
Cc: Maarten Lankhorst <[email protected]>
Cc: Thomas Zimmermann <[email protected]>
Cc: David Airlie <[email protected]>
Cc: [email protected]
Signed-off-by: Daniel Vetter <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
IA64 is the only architecture which does not consider the pgoff value when
searching for a possible free memory region with vm_unmapped_area().
Adding this seems to have no negative side effect on IA64, so add it now
to make IA64 consistent with all other architectures.
Cc: [email protected] # 6.4
Signed-off-by: Helge Deller <[email protected]>
Tested-by: matoro <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
The io_uring testcase is broken on IA-64 since commit d808459b2e31
("io_uring: Adjust mapping wrt architecture aliasing requirements").
The reason is, that this commit introduced an own architecture
independend get_unmapped_area() search algorithm which finds on IA-64 a
memory region which is outside of the regular memory region used for
shared userspace mappings and which can't be used on that platform
due to aliasing.
To avoid similar problems on IA-64 and other platforms in the future,
it's better to switch back to the architecture-provided
get_unmapped_area() function and adjust the needed input parameters
before the call. Beside fixing the issue, the function now becomes
easier to understand and maintain.
This patch has been successfully tested with the io_uring testcase on
physical x86-64, ppc64le, IA-64 and PA-RISC machines. On PA-RISC the LTP
mmmap testcases did not report any regressions.
Cc: [email protected] # 6.4
Signed-off-by: Helge Deller <[email protected]>
Reported-by: matoro <[email protected]>
Fixes: d808459b2e31 ("io_uring: Adjust mapping wrt architecture aliasing requirements")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
When we reconfigure the SVE vector length we discard the backing storage
for the SVE vectors and then reallocate on next SVE use, leaving the SME
specific state alone. This means that we do not enable SME traps if they
were already disabled. That means that userspace code can enter streaming
mode without trapping, putting the task in a state where if we try to save
the state of the task we will fault.
Since the ABI does not specify that changing the SVE vector length disturbs
SME state, and since SVE code may not be aware of SME code in the process,
we shouldn't simply discard any ZA state. Instead immediately reallocate
the storage for SVE, and disable SME if we change the SVE vector length
while there is no SME state active.
Disabling SME traps on SVE vector length changes would make the overall
code more complex since we would have a state where we have valid SME state
stored but might get a SME trap.
Fixes: 9e4ab6c89109 ("arm64/sme: Implement vector length configuration prctl()s")
Reported-by: David Spickett <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/20230720-arm64-fix-sve-sme-vl-change-v2-1-8eea06b82d57@kernel.org
Signed-off-by: Will Deacon <[email protected]>
|
|
Pull drm fixes from Dave Airlie:
"Mostly amdgpu fixes, a couple of i915 fixes, some nouveau and then a
few misc accel and other fixes.
client:
- memory leak fix
dma-buf:
- memory leak fix
qaic:
- bound check fixes
- map_user_pages leak
- int overflow fixes
habanalabs:
- debugfs stub helper
nouveau:
- aux event slot fixes
- anx9805 cards fixes
i915:
- Add sentinel to xehp_oa_b_counters
- Revert "drm/i915: use localized __diag_ignore_all() instead of per
file"
amdgpu:
- More PCIe DPM fixes for Intel platforms
- DCN3.0.1 fixes
- Virtual display timer fix
- Async flip fix
- SMU13 clock reporting fixes
- Add missing PSP firmware declaration
- DP MST fix
- DCN3.1.x fixes
- Slab out of bounds fix"
* tag 'drm-fixes-2023-07-21' of git://anongit.freedesktop.org/drm/drm: (31 commits)
accel/habanalabs: add more debugfs stub helpers
drm/nouveau/kms/nv50-: init hpd_irq_lock for PIOR DP
drm/nouveau/disp: PIOR DP uses GPIO for HPD, not PMGR AUX interrupts
drm/nouveau/i2c: fix number of aux event slots
drm/amdgpu: use a macro to define no xcp partition case
drm/amdgpu/vm: use the same xcp_id from root PD
drm/amdgpu: fix slab-out-of-bounds issue in amdgpu_vm_pt_create
drm/amdgpu: Allocate root PD on correct partition
drm/amd/display: Keep PHY active for DP displays on DCN31
drm/amd/display: Prevent vtotal from being set to 0
drm/amd/display: Disable MPC split by default on special asic
drm/amd/display: check TG is non-null before checking if enabled
drm/amd/display: Add polling method to handle MST reply packet
drm/amd/display: Clean up errors & warnings in amdgpu_dm.c
drm/amdgpu: Allow the initramfs generator to include psp_13_0_6_ta
drm/amdgpu/pm: make mclk consistent for smu 13.0.7
drm/amdgpu/pm: make gfxclock consistent for sienna cichlid
drm/amd/display: only accept async flips for fast updates
drm/amdgpu/vkms: relax timer deactivation by hrtimer_try_to_cancel
drm/amd/display: add DCN301 specific logic for OTG programming
...
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.5-2023-07-20:
amdgpu:
- More PCIe DPM fixes for Intel platforms
- DCN3.0.1 fixes
- Virtual display timer fix
- Async flip fix
- SMU13 clock reporting fixes
- Add missing PSP firmware declaration
- DP MST fix
- DCN3.1.x fixes
- Slab out of bounds fix
Signed-off-by: Dave Airlie <[email protected]>
From: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Add sentinel to xehp_oa_b_counters [perf] (Andrzej Hajda)
- Revert "drm/i915: use localized __diag_ignore_all() instead of per file" (Jani Nikula)
Signed-off-by: Dave Airlie <[email protected]>
From: Tvrtko Ursulin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/ZLjuwhLhwab5B7RY@tursulin-desk
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Memory leak fixes in drm/client, memory access/leak fixes for
accel/qaic, another leak fix in dma-buf and three nouveau fixes around
hotplugging.
Signed-off-by: Dave Airlie <[email protected]>
From: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/fmj5nok7zggux2lcpdtls2iknweba54wfc6o4zxq6i6s3dgi2r@7z3eawwhyhen
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata fix from Damien Le Moal:
- Add missing MODULE_DESCRIPTION() in the many of the protocol modules
for the pata_parport driver to avoid compilation warnings with "make
W=1".
* tag 'ata-6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: pata_parport: Add missing protocol modules description
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from BPF, netfilter, bluetooth and CAN.
Current release - regressions:
- eth: r8169: multiple fixes for PCIe ASPM-related problems
- vrf: fix RCU lockdep splat in output path
Previous releases - regressions:
- gso: fall back to SW segmenting with GSO_UDP_L4 dodgy bit set
- dsa: mv88e6xxx: do a final check before timing out when polling
- nf_tables: fix sleep in atomic in nft_chain_validate
Previous releases - always broken:
- sched: fix undoing tcf_bind_filter() in multiple classifiers
- bpf, arm64: fix BTI type used for freplace attached functions
- can: gs_usb: fix time stamp counter initialization
- nft_set_pipapo: fix improper element removal (leading to UAF)
Misc:
- net: support STP on bridge in non-root netns, STP prevents packet
loops so not supporting it results in freezing systems of
unsuspecting users, and in turn very upset noises being made
- fix kdoc warnings
- annotate various bits of TCP state to prevent data races"
* tag 'net-6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (95 commits)
net: phy: prevent stale pointer dereference in phy_init()
tcp: annotate data-races around fastopenq.max_qlen
tcp: annotate data-races around icsk->icsk_user_timeout
tcp: annotate data-races around tp->notsent_lowat
tcp: annotate data-races around rskq_defer_accept
tcp: annotate data-races around tp->linger2
tcp: annotate data-races around icsk->icsk_syn_retries
tcp: annotate data-races around tp->keepalive_probes
tcp: annotate data-races around tp->keepalive_intvl
tcp: annotate data-races around tp->keepalive_time
tcp: annotate data-races around tp->tsoffset
tcp: annotate data-races around tp->tcp_tx_delay
Bluetooth: MGMT: Use correct address for memcpy()
Bluetooth: btusb: Fix bluetooth on Intel Macbook 2014
Bluetooth: SCO: fix sco_conn related locking and validity issues
Bluetooth: hci_conn: return ERR_PTR instead of NULL when there is no link
Bluetooth: hci_sync: Avoid use-after-free in dbg for hci_remove_adv_monitor()
Bluetooth: coredump: fix building with coredump disabled
Bluetooth: ISO: fix iso_conn related locking and validity issues
Bluetooth: hci_event: call disconnect callback before deleting conn
...
|
|
The flush bio may have data, may have no data (empty flush), we couldn't
calculate cost for empty flush bio. So we'd better just skip it for now.
Another side effect is that empty flush bio's bio_end_sector() is 0, cause
iocg->cursor reset to 0, may break the cost calculation of other bios.
This isn't good enough, since flush bio still consume the device bandwidth,
but flush request is special, can be merged randomly in the flush state
machine, we don't know how to calculate cost for it for now.
Its completion time also has flaws, which may include the pre-flush or
post-flush completion time, but I don't know if we need to fix that and
how to fix it.
Signed-off-by: Chengming Zhou <[email protected]>
Acked-by: Tejun Heo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- Fix building with coredump disabled
- Fix use-after-free in hci_remove_adv_monitor
- Use RCU for hci_conn_params and iterate safely in hci_sync
- Fix locking issues on ISO and SCO
- Fix bluetooth on Intel Macbook 2014
* tag 'for-net-2023-07-20' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: MGMT: Use correct address for memcpy()
Bluetooth: btusb: Fix bluetooth on Intel Macbook 2014
Bluetooth: SCO: fix sco_conn related locking and validity issues
Bluetooth: hci_conn: return ERR_PTR instead of NULL when there is no link
Bluetooth: hci_sync: Avoid use-after-free in dbg for hci_remove_adv_monitor()
Bluetooth: coredump: fix building with coredump disabled
Bluetooth: ISO: fix iso_conn related locking and validity issues
Bluetooth: hci_event: call disconnect callback before deleting conn
Bluetooth: use RCU for hci_conn_params and iterate safely in hci_sync
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
Netfilter fixes for net:
The following patchset contains Netfilter fixes for net:
1. Fix spurious -EEXIST error from userspace due to
padding holes, this was broken since 4.9 days
when 'ignore duplicate entries on insert' feature was
added.
2. Fix a sched-while-atomic bug, present since 5.19.
3. Properly remove elements if they lack an "end range".
nft userspace always sets an end range attribute, even
when its the same as the start, but the abi doesn't
have such a restriction. Always broken since it was
added in 5.6, all three from myself.
4 + 5: Bound chain needs to be skipped in netns release
and on rule flush paths, from Pablo Neira.
* tag 'nf-23-07-20' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: skip bound chain on rule flush
netfilter: nf_tables: skip bound chain in netns release path
netfilter: nft_set_pipapo: fix improper element removal
netfilter: nf_tables: can't schedule in nft_chain_validate
netfilter: nf_tables: fix spurious set element insertion failure
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
mdio_bus_init() and phy_driver_register() both have error paths, and if
those are ever hit, ethtool will have a stale pointer to the
phy_ethtool_phy_ops stub structure, which references memory from a
module that failed to load (phylib).
It is probably hard to force an error in this code path even manually,
but the error teardown path of phy_init() should be the same as
phy_exit(), which is now simply not the case.
Fixes: 55d8f053ce1b ("net: phy: Register ethtool PHY operations")
Link: https://lore.kernel.org/netdev/[email protected]/
Suggested-by: Russell King (Oracle) <[email protected]>
Signed-off-by: Vladimir Oltean <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Eric Dumazet says:
====================
tcp: add missing annotations
This series was inspired by one syzbot (KCSAN) report.
do_tcp_getsockopt() does not lock the socket, we need to
annotate most of the reads there (and other places as well).
This is a first round, another series will come later.
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This field can be read locklessly.
Fixes: 1536e2857bd3 ("tcp: Add a TCP_FASTOPEN socket option to get a max backlog on its listner")
Signed-off-by: Eric Dumazet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This field can be read locklessly from do_tcp_getsockopt()
Fixes: dca43c75e7e5 ("tcp: Add TCP_USER_TIMEOUT socket option.")
Signed-off-by: Eric Dumazet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
tp->notsent_lowat can be read locklessly from do_tcp_getsockopt()
and tcp_poll().
Fixes: c9bee3b7fdec ("tcp: TCP_NOTSENT_LOWAT socket option")
Signed-off-by: Eric Dumazet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
do_tcp_getsockopt() reads rskq_defer_accept while another cpu
might change its value.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
do_tcp_getsockopt() reads tp->linger2 while another cpu
might change its value.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
do_tcp_getsockopt() and reqsk_timer_handler() read
icsk->icsk_syn_retries while another cpu might change its value.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
do_tcp_getsockopt() reads tp->keepalive_probes while another cpu
might change its value.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
do_tcp_getsockopt() reads tp->keepalive_intvl while another cpu
might change its value.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
do_tcp_getsockopt() reads tp->keepalive_time while another cpu
might change its value.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
do_tcp_getsockopt() reads tp->tsoffset while another cpu
might change its value.
Fixes: 93be6ce0e91b ("tcp: set and get per-socket timestamp")
Signed-off-by: Eric Dumazet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
do_tcp_getsockopt() reads tp->tcp_tx_delay while another cpu
might change its value.
Fixes: a842fe1425cb ("tcp: add optional per socket transmit delay")
Signed-off-by: Eric Dumazet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This counter is not used anywhere, so delete it.
Signed-off-by: Chengming Zhou <[email protected]>
Reviewed-by: Bart Van Assche <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
io-wq assumes that an issue is blocking, but it may not be if the
request type has asked for a non-blocking attempt. If we get
-EAGAIN for that case, then we need to treat it as a final result
and not retry or arm poll for it.
Cc: [email protected] # 5.10+
Link: https://github.com/axboe/liburing/issues/897
Signed-off-by: Jens Axboe <[email protected]>
|
|
In function ‘fortify_memcpy_chk’,
inlined from ‘get_conn_info_complete’ at net/bluetooth/mgmt.c:7281:2:
include/linux/fortify-string.h:592:25: error: call to
‘__read_overflow2_field’ declared with attribute warning: detected read
beyond size of field (2nd parameter); maybe use struct_group()?
[-Werror=attribute-warning]
592 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
This is due to the wrong member is used for memcpy(). Use correct one.
Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
|
|
Commit c13380a55522 ("Bluetooth: btusb: Do not require hardcoded
interface numbers") inadvertedly broke bluetooth on Intel Macbook 2014.
The intention was to keep behavior intact when BTUSB_IFNUM_2 is set and
otherwise allow any interface numbers. The problem is that the new logic
condition omits the case where bInterfaceNumber is 0.
Fix BTUSB_IFNUM_2 handling by allowing both interface number 0 and 2
when the flag is set.
Fixes: c13380a55522 ("Bluetooth: btusb: Do not require hardcoded interface numbers")
Reported-by: John Holland <[email protected]>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217651
Signed-off-by: Tomasz Moń <[email protected]>
Tested-by: John Holland<[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
|
|
Operations that check/update sk_state and access conn should hold
lock_sock, otherwise they can race.
The order of taking locks is hci_dev_lock > lock_sock > sco_conn_lock,
which is how it is in connect/disconnect_cfm -> sco_conn_del ->
sco_chan_del.
Fix locking in sco_connect to take lock_sock around updating sk_state
and conn.
sco_conn_del must not occur during sco_connect, as it frees the
sco_conn. Hold hdev->lock longer to prevent that.
sco_conn_add shall return sco_conn with valid hcon. Make it so also when
reusing an old SCO connection waiting for disconnect timeout (see
__sco_sock_close where conn->hcon is set to NULL).
This should not reintroduce the issue fixed in the earlier
commit 9a8ec9e8ebb5 ("Bluetooth: SCO: Fix possible circular locking
dependency on sco_connect_cfm"), the relevant fix of releasing lock_sock
in sco_sock_connect before acquiring hdev->lock is retained.
These changes mirror similar fixes earlier in ISO sockets.
Fixes: 9a8ec9e8ebb5 ("Bluetooth: SCO: Fix possible circular locking dependency on sco_connect_cfm")
Signed-off-by: Pauli Virtanen <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
|
|
hci_connect_sco currently returns NULL when there is no link (i.e. when
hci_conn_link() returns NULL).
sco_connect() expects an ERR_PTR in case of any error (see line 266 in
sco.c). Thus, hcon set as NULL passes through to sco_conn_add(), which
tries to get hcon->hdev, resulting in dereferencing a NULL pointer as
reported by syzkaller.
The same issue exists for iso_connect_cis() calling hci_connect_cis().
Thus, make hci_connect_sco() and hci_connect_cis() return ERR_PTR
instead of NULL.
Reported-and-tested-by: [email protected]
Closes: https://syzkaller.appspot.com/bug?extid=37acd5d80d00d609d233
Fixes: 06149746e720 ("Bluetooth: hci_conn: Add support for linking multiple hcon")
Signed-off-by: Siddh Raman Pant <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
|
|
KASAN reports that there's a use-after-free in
hci_remove_adv_monitor(). Trawling through the disassembly, you can
see that the complaint is from the access in bt_dev_dbg() under the
HCI_ADV_MONITOR_EXT_MSFT case. The problem case happens because
msft_remove_monitor() can end up freeing the monitor
structure. Specifically:
hci_remove_adv_monitor() ->
msft_remove_monitor() ->
msft_remove_monitor_sync() ->
msft_le_cancel_monitor_advertisement_cb() ->
hci_free_adv_monitor()
Let's fix the problem by just stashing the relevant data when it's
still valid.
Fixes: 7cf5c2978f23 ("Bluetooth: hci_sync: Refactor remove Adv Monitor")
Signed-off-by: Douglas Anderson <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
|