| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Merge core thermal control changes for 6.1-rc1:
- Increase maximum number of trip points in the thermal core (Sumeet
Pawnikar).
- Replace strlcpy() with unused retval with strscpy() in the core
thermal control code (Wolfram Sang).
- Do not lock thermal zone mutex in the user space governor (Rafael
Wysocki)
- Rework the device tree initialization, convert the drivers to the
new API and remove the old OF code (Daniel Lezcano)
- Fix return value to -ENODEV when searching for a specific thermal
zone which does not exist (Daniel Lezcano)
- Fix the return value inspection in of_thermal_zone_find() (Dan
Carpenter)
- Fix kernel panic when KASAN is enabled as it detects use after
free when unregistering a thermal zone (Daniel Lezcano)
- Move the set_trip ops inside the therma sysfs code (Daniel Lezcano)
- Remove unnecessary error message as it is already showed in the
underlying function (Jiapeng Chong)
- Rework the monitoring path and move the locks upper in the call
stack to fix some potentials race windows (Daniel Lezcano)
- Fix lockdep_assert() warning introduced by the lock rework (Daniel
Lezcano)
- Revert the Mellanox 'hotter thermal zone' feature because it is
already handled in the thermal framework core code (Daniel Lezcano)
* thermal-core: (47 commits)
thermal: core: Increase maximum number of trip points
thermal: move from strlcpy() with unused retval to strscpy()
thermal: gov_user_space: Do not lock thermal zone mutex
Revert "mlxsw: core: Add the hottest thermal zone detection"
thermal/core: Fix lockdep_assert() warning
thermal/core: Move the mutex inside the thermal_zone_device_update() function
thermal/core: Move the thermal zone lock out of the governors
thermal/governors: Group the thermal zone lock inside the throttle function
thermal/core: Rework the monitoring a bit
thermal/core: Rearm the monitoring only one time
thermal/drivers/qcom/spmi-adc-tm5: Remove unnecessary print function dev_err()
thermal/of: Remove old OF code
thermal/core: Move set_trip_temp ops to the sysfs code
thermal/drivers/samsung: Switch to new of thermal API
regulator/drivers/max8976: Switch to new of thermal API
Input: sun4i-ts - switch to new of thermal API
iio/drivers/sun4i_gpadc: Switch to new of thermal API
hwmon/drivers/core: Switch to new of thermal API
hwmon: pm_bus: core: Switch to new of thermal API
ata/drivers/ahci_imx: Switch to new of thermal API
...
|
|
Merge cpuidle changes, PM core changes and power capping changes for
6.1-rc1:
- Add AlderLake-N support to intel_idle (Zhang Rui).
- Replace strlcpy() with unused retval with strscpy() in intel_idle
(Wolfram Sang).
- Remove redundant check from cpuidle_switch_governor() (Yu Liao).
- Replace strlcpy() with unused retval with strscpy() in the powernv
cpuidle driver (Wolfram Sang).
- Drop duplicate word from a comment in the coupled cpuidle driver
(Jason Wang).
- Make rpm_resume() return -EINPROGRESS if RPM_NOWAIT is passed to it
in the flags and the device is about to resume (Rafael Wysocki).
- Add extra debugging statement for multiple active IRQs to system
wakeup handling code (Mario Limonciello).
- Replace strlcpy() with unused retval with strscpy() in the core
system suspend support code (Wolfram Sang).
- Update the intel_rapl power capping driver:
* Use standard Energy Unit for SPR Dram RAPL domain (Zhang Rui).
* Add support for RAPTORLAKE_S (Zhang Rui).
* Fix UBSAN shift-out-of-bounds issue (Chao Qin).
* pm-cpuidle:
intel_idle: Add AlderLake-N support
cpuidle: Remove redundant check in cpuidle_switch_governor()
intel_idle: move from strlcpy() with unused retval to strscpy()
cpuidle: powernv: move from strlcpy() with unused retval to strscpy()
cpuidle: coupled: Drop duplicate word from a comment
* pm-core:
PM: runtime: Return -EINPROGRESS from rpm_resume() in the RPM_NOWAIT case
* pm-sleep:
PM: wakeup: Add extra debugging statement for multiple active IRQs
PM: suspend: move from strlcpy() with unused retval to strscpy()
* powercap:
powercap: intel_rapl: Use standard Energy Unit for SPR Dram RAPL domain
powercap: intel_rapl: fix UBSAN shift-out-of-bounds issue
powercap: intel_rapl: Add support for RAPTORLAKE_S
|
|
Merge cpufreq changes for 6.1-rc1:
- Add isupport for Tiger Lake in no-HWP mode to intel_pstate (Doug
Smythies).
- Update the AMD P-state driver (Perry Yuan):
* Fix wrong lowest perf fetch.
* Map desired perf into pstate scope for powersave governor.
* Update pstate frequency transition delay time.
* Fix initial highest_perf value.
* Clean up.
- Move max CPU capacity to sugov_policy in the schedutil cpufreq
governor (Lukasz Luba).
- Add SM6115 to cpufreq-dt blocklist (Adam Skladowski).
- Add support for Tegra239 and minor cleanups (Sumit Gupta, ye xingchen,
and Yang Yingliang).
- Add freq qos for qcom cpufreq driver and minor cleanups (Xuewen Yan,
and Viresh Kumar).
- Minor cleanups around functions called at module_init() (Xiu Jianfeng).
- Use module_init and add module_exit for bmips driver (Zhang Jianhua).
* pm-cpufreq:
cpufreq: qcom-cpufreq-hw: Add cpufreq qos for LMh
cpufreq: Add __init annotation to module init funcs
cpufreq: tegra194: change tegra239_cpufreq_soc to static
cpufreq: tegra194: Add support for Tegra239
cpufreq: qcom-cpufreq-hw: Fix uninitialized throttled_freq warning
cpufreq: intel_pstate: Add Tigerlake support in no-HWP mode
cpufreq: amd-pstate: Fix initial highest_perf value
cpufreq: tegra194: Remove the unneeded result variable
cpufreq: amd-pstate: update pstate frequency transition delay time
cpufreq: amd_pstate: map desired perf into pstate scope for powersave governor
cpufreq: amd_pstate: fix wrong lowest perf fetch
cpufreq: amd-pstate: fix white-space
cpufreq: amd-pstate: simplify cpudata pointer assignment
cpufreq: bmips-cpufreq: Use module_init and add module_exit
cpufreq: schedutil: Move max CPU capacity to sugov_policy
cpufreq: Add SM6115 to cpufreq-dt-platdev blocklist
|
|
Merge a PNP changes for 6.1-rc1:
- Drop unused pnpid32_to_pnpid() declaration from PNP code (Gaosheng
Cui).
* pnp:
PNPBIOS: remove unused pnpid32_to_pnpid() declaration
|
|
Merge ACPI _UID handling unification changes for 6.1-rc1:
- Introduce acpi_dev_uid_to_integer() to convert a _UID string into an
integer value (Andy Shevchenko).
- Use acpi_dev_uid_to_integer() in several places to unify _UID
handling (Andy Shevchenko).
* acpi-uid:
efi/dev-path-parser: Refactor _UID handling to use acpi_dev_uid_to_integer()
spi: pxa2xx: Refactor _UID handling to use acpi_dev_uid_to_integer()
perf: qcom_l2_pmu: Refactor _UID handling to use acpi_dev_uid_to_integer()
i2c: mlxbf: Refactor _UID handling to use acpi_dev_uid_to_integer()
i2c: amd-mp2-plat: Refactor _UID handling to use acpi_dev_uid_to_integer()
ACPI: x86: Refactor _UID handling to use acpi_dev_uid_to_integer()
ACPI: LPSS: Refactor _UID handling to use acpi_dev_uid_to_integer()
ACPI: utils: Add acpi_dev_uid_to_integer() helper to get _UID as integer
|
|
Merge miscellaneous ACPI material, ACPI tools changes and ACPI
documentation updates for 6.1-rc1:
- Drop references to non-functional 01.org/linux-acpi web site from
MAINTAINERS and Kconfig help texts (Rafael Wysocki).
- Replace strlcpy() with unused retval with strscpy() in the ACPI
support code (Wolfram Sang).
- Do not initialize ret in main() in the pfrut utility (Shi junming).
- Drop useless ACPI DSDT override documentation (Rafael Wysocki).
- Fix a few typos and wording mistakes in the ACPI device enumeration
documentation (Jean Delvare).
* acpi-misc:
MAINTAINERS: Drop records pointing to 01.org/linux-acpi
ACPI: Kconfig: Drop link to https://01.org/linux-acpi
ACPI: DPTF: Drop stale link from Kconfig help
ACPI: move from strlcpy() with unused retval to strscpy()
* acpi-tools:
ACPI: tools: pfrut: Do not initialize ret in main()
* acpi-docs:
ACPI: docs: Drop useless DSDT override documentation
ACPI: docs: enumeration: Fix a few typos and wording mistakes
|
|
Merge EC, AC, fan and backlight driver changes and ACPI AMBA support
update for 6.1-rc1:
- Drop unneeded result variable from ec_write() (ye xingchen).
- Remove the leftover struct acpi_ac_bl from the ACPI AC driver (Hanjun
Guo).
- Reorder symbols to get rid of a few forward declarations in the ACPI
fan driver (Uwe Kleine-König).
- Add Toshiba Satellite/Portege Z830 ACPI backlight quirk (Arvid
Norlander).
- Add ARM DMA-330 controller to the supported list in the ACPI AMBA
driver (Vijayenthiran Subramaniam).
* acpi-ec:
ACPI: EC: Drop unneeded result variable from ec_write()
* acpi-ac:
ACPI: AC: Remove the leftover struct acpi_ac_bl
* acpi-fan:
ACPI: fan: Reorder symbols to get rid of a few forward declarations
* acpi-video:
ACPI: video: Add Toshiba Satellite/Portege Z830 quirk
* acpi-amba:
ACPI: AMBA: Add ARM DMA-330 controller to the supported list
|
|
Merge new material related to CPPC, PCC, APEI and OSI strings handling
for 6.1-rc1:
- Disable frequency invariance in the CPPC library if registers used
by cppc_get_perf_ctrs() are accessed via PCC (Jeremy Linton).
- Add ACPI disabled check to acpi_cpc_valid() (Perry Yuan).
- Fix Tx acknowledge in the PCC address space handler (Huisong Li).
- Use wait_for_completion_timeout() for PCC mailbox operations (Huisong
Li).
- Release resources on PCC address space setup failure path (Rafael
Mendonca).
- Remove unneeded result variables from APEI code (ye xingchen).
- Print total number of records found during BERT log parsing (Dmitry
Monakhov).
- Drop support for 3 _OSI strings that should not be necessary any
more and update documentation on custom _OSI strings so that adding
new ones is not encouraged any more (Mario Limonciello).
* acpi-cppc:
ACPI: CPPC: Disable FIE if registers in PCC regions
ACPI: CPPC: Add ACPI disabled check to acpi_cpc_valid()
* acpi-pcc:
ACPI: PCC: Fix Tx acknowledge in the PCC address space handler
ACPI: PCC: replace wait_for_completion()
ACPI: PCC: Release resources on address space setup failure path
* acpi-apei:
ACPI: APEI: Remove unneeded result variables
ACPI: APEI: Add BERT error log footer
* acpi-osi:
ACPI: OSI: Update Documentation on custom _OSI strings
ACPI: OSI: Remove Linux-HPI-Hybrid-Graphics _OSI string
ACPI: OSI: Remove Linux-Lenovo-NV-HDMI-Audio _OSI string
ACPI: OSI: Remove Linux-Dell-Video _OSI string
|
|
Pull documentation updates from Jonathan Corbet:
"There's not a huge amount of activity in the docs tree this time
around, but a few significant changes even so:
- A complete rewriting of the top-level index.rst file, which mostly
reflects itself in a redone top page in the HTML-rendered docs. The
hope is that the new organization will be a friendlier starting
point for both users and developers.
- Some math-rendering improvements.
- A coding-style.rst update on the use of BUG() and WARN()
- A big maintainer-PHP guide update.
- Some code-of-conduct updates
- More Chinese translation work
Plus the usual pile of typo fixes, corrections, and updates"
* tag 'docs-6.1' of git://git.lwn.net/linux: (66 commits)
checkpatch: warn on usage of VM_BUG_ON() and other BUG variants
coding-style.rst: document BUG() and WARN() rules ("do not crash the kernel")
Documentation: devres: add missing IO helper
Documentation: devres: update IRQ helper
Documentation/mm: modify page_referenced to folio_referenced
Documentation/CoC: Reflect current CoC interpretation and practices
docs/doc-guide: Add documentation on SPHINX_IMGMATH
docs: process/5.Posting.rst: clarify use of Reported-by: tag
docs, kprobes: Fix the wrong location of Kprobes
docs: add a man-pages link to the front page
docs: put atomic*.txt and memory-barriers.txt into the core-api book
docs: move asm-annotations.rst into core-api
docs: remove some index.rst cruft
docs: reconfigure the HTML left column
docs: Rewrite the front page
docs: promote the title of process/index.rst
Documentation: devres: add missing SPI helper
Documentation: devres: add missing PINCTRL helpers
docs: hugetlbpage.rst: fix a typo of hugepage size
docs/zh_CN: Add new translation of admin-guide/bootconfig.rst
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU updates from Paul McKenney:
- Documentation updates.
This is the first in a series from an ongoing review of the RCU
documentation. "Why are people thinking -that- about RCU? Oh. Because
that is an entirely reasonable interpretation of its documentation."
- Miscellaneous fixes.
- Improved memory allocation and heuristics.
- Improve rcu_nocbs diagnostic output.
- Add full-sized polled RCU grace period state values.
These are the same size as an rcu_head structure, which is double
that of the traditional unsigned long state values that may still be
obtained from et_state_synchronize_rcu(). The added size avoids
missing overlapping grace periods. This benefit is that call_rcu()
can be replaced by polling, which can be attractive in situations
where RCU-protected data is aged out of memory.
Early in the series, the size of this state value is three unsigned
longs. Later in the series, the fastpaths in synchronize_rcu() and
synchronize_rcu_expedited() are reworked to permit the full state to
be represented by only two unsigned longs. This reworking slows these
two functions down in SMP kernels running either on single-CPU
systems or on systems with all but one CPU offlined, but this should
not be a significant problem. And if it somehow becomes a problem in
some yet-as-unforeseen situations, three-value state values can be
provided for only those situations.
Finally, a pair of functions named same_state_synchronize_rcu() and
same_state_synchronize_rcu_full() allow grace-period state values to
be compared for equality. This permits users to maintain lists of
data structures having the same state value, removing the need for
per-data-structure grace-period state values, thus decreasing memory
footprint.
- Polled SRCU grace-period updates, including adding tests to
rcutorture and reducing the incidence of Tiny SRCU grace-period-state
counter wrap.
- Improve Tasks RCU diagnostics and quiescent-state detection.
* tag 'rcu.2022.09.30a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (55 commits)
rcutorture: Use the barrier operation specified by cur_ops
rcu-tasks: Make RCU Tasks Trace check for userspace execution
rcu-tasks: Ensure RCU Tasks Trace loops have quiescent states
rcu-tasks: Convert RCU_LOCKDEP_WARN() to WARN_ONCE()
srcu: Make Tiny SRCU use full-sized grace-period counters
srcu: Make Tiny SRCU poll_state_synchronize_srcu() more precise
srcu: Add GP and maximum requested GP to Tiny SRCU rcutorture output
rcutorture: Make "srcud" option also test polled grace-period API
rcutorture: Limit read-side polling-API testing
rcu: Add functions to compare grace-period state values
rcutorture: Expand rcu_torture_write_types() first "if" statement
rcutorture: Use 1-suffixed variable in rcu_torture_write_types() check
rcu: Make synchronize_rcu() fastpath update only boot-CPU counters
rcutorture: Adjust rcu_poll_need_2gp() for rcu_gp_oldstate field removal
rcu: Remove ->rgos_polled field from rcu_gp_oldstate structure
rcu: Make synchronize_rcu_expedited() fast path update .expedited_sequence
rcu: Remove expedited grace-period fast-path forward-progress helper
rcu: Make synchronize_rcu() fast path update ->gp_seq counters
rcu-tasks: Remove grace-period fast-path rcu-tasks helper
rcu: Set rcu_data structures' initial ->gpwrap value to true
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull LKMM (Linux Kernel Memory Model) updates from Paul McKenney:
"Several documentation updates"
* tag 'lkmm.2022.09.30a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
tools/memory-model: Clarify LKMM's limitations in litmus-tests.txt
docs/memory-barriers.txt: Fixup long lines
docs/memory-barriers.txt: Fix confusing name of 'data dependency barrier'
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull nolibc updates from Paul McKenney:
"Most notably greatly improved testing. These tests are located in
tools/testing/selftests/nolibc. The output of "make help" is as
follows:
Supported targets under selftests/nolibc:
all call the "run" target below
help this help
sysroot create the nolibc sysroot here (uses $ARCH)
nolibc-test build the executable (uses $CC and $CROSS_COMPILE)
initramfs prepare the initramfs with nolibc-test
defconfig create a fresh new default config (uses $ARCH)
kernel (re)build the kernel with the initramfs (uses $ARCH)
run runs the kernel in QEMU after building it (uses $ARCH, $TEST)
rerun runs a previously prebuilt kernel in QEMU (uses $ARCH, $TEST)
clean clean the sysroot, initramfs, build and output files
The output file is "run.out". Test ranges may be passed using $TEST.
Currently using the following variables:
ARCH = x86
CROSS_COMPILE =
CC = gcc
OUTPUT = /home/git/linux-rcu/tools/testing/selftests/nolibc/
TEST =
QEMU_ARCH = x86_64 [determined from $ARCH]
IMAGE_NAME = bzImage [determined from $ARCH]
The output of a successful x86 "make run" is currently as follows,
with kernel build output omitted:
$ make run
71 test(s) passed."
* tag 'nolibc.2022.09.30a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
selftests/nolibc: Avoid generated files being committed
selftests/nolibc: add a "help" target
selftests/nolibc: "sysroot" target installs a local copy of the sysroot
selftests/nolibc: add a "run" target to start the kernel in QEMU
selftests/nolibc: add a "defconfig" target
selftests/nolibc: add a "kernel" target to build the kernel with the initramfs
selftests/nolibc: support glibc as well
selftests/nolibc: condition some tests on /proc existence
selftests/nolibc: recreate and populate /dev and /proc if missing
selftests/nolibc: on x86, support exiting with isa-debug-exit
selftests/nolibc: exit with poweroff on success when getpid() == 1
selftests/nolibc: add a few tests for some libc functions
selftests/nolibc: implement a few tests for various syscalls
selftests/nolibc: support a test definition format
selftests/nolibc: add basic infrastructure to ease creation of nolibc tests
tools/nolibc: make sys_mmap() automatically use the right __NR_mmap definition
tools/nolibc: fix build warning in sys_mmap() when my_syscall6 is not defined
tools/nolibc: make argc 32-bit in riscv startup code
|
|
Pull ARM fixes from Russell King:
"Three fixes for ARM:
- unbreak the RiscPC build
- fix wrong pg_level in page table dumper
- make MT_MEMORY_RO really read-only with LPAE"
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9247/1: mm: set readonly for MT_MEMORY_RO with ARM_LPAE
ARM: 9244/1: dump: Fix wrong pg_level in walk_pmd()
ARM: 9243/1: riscpc: Unbreak the build
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
- Fix forward secrecy of RNG seed boot record handling
- Make RNG seed boot record handling generic for all m68k platforms
using bootinfo
- defconfig updates
- Minor fixes and improvements
* tag 'm68k-for-v6.1-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: Rework BI_VIRT_RNG_SEED as BI_RNG_SEED
m68k: Process bootinfo records before saving them
m68k: defconfig: Update defconfigs for v6.0-rc2
m68k: Allow kexec on M68KCLASSIC with MMU enabled only
m68k: Move from strlcpy with unused retval to strscpy
|
|
Pull MIPS updates from Thomas Bogendoerfer:
- mainly cleanups
- fix enabling interrupts on second VPE for Lantiq platform
- switch to use gpiod API
- allow firmware passing RND seed
* tag 'mips_6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (29 commits)
MIPS: pci: lantiq: switch to using gpiod API
mips: allow firmware to pass RNG seed to kernel
MIPS: Simplify __bswapdi2() and __bswapsi2()
MIPS: Silence missing prototype warning
mips: update config files
MIPS: Lantiq: vmmc: fix compile break introduced by gpiod patch
MIPS: IRQ: remove orphan allocate_irqno() declaration
MIPS: remove orphan sb1250_time_init() declaration
MIPS: Lantiq: switch vmmc to use gpiod API
MIPS: lantiq: enable all hardware interrupts on second VPE
MIPS: BCM47XX: Cast memcmp() of function to (void *)
mips: ralink: convert to DEFINE_SHOW_ATTRIBUTE
mips: kernel: convert to DEFINE_SHOW_ATTRIBUTE
mips: cavium: convert to DEFINE_SHOW_ATTRIBUTE
MIPS: AR7: remove orphan declarations from arch/mips/include/asm/mach-ar7/ar7.h
MIPS: remove orphan sni_cpu_time_init() declaration
MIPS: IRQ: remove orphan declarations from arch/mips/include/asm/irq.h
MIPS: Octeon: remove orphan octeon_hal_setup_reserved32() declaration
MIPS: Octeon: remove orphan cvmx_fpa_setup_pool() declaration
MIPS: Octeon: remove orphan octeon_swiotlb declaration
...
|
|
Remove circular dependency between nf_nat module and nf_conntrack one
moving bpf_ct_set_nat_info kfunc in nf_nat_bpf.c
Fixes: 0fabd2aa199f ("net: netfilter: add bpf_ct_set_nat_info kfunc helper")
Suggested-by: Kumar Kartikeya Dwivedi <[email protected]>
Tested-by: Nathan Chancellor <[email protected]>
Tested-by: Yauheni Kaliuta <[email protected]>
Signed-off-by: Lorenzo Bianconi <[email protected]>
Acked-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/r/51a65513d2cda3eeb0754842e8025ab3966068d8.1664490511.git.lorenzo@kernel.org
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Sphinx reported warnings on missing implementation notes documentations in the
table of contents:
Documentation/bpf/clang-notes.rst: WARNING: document isn't included in any toctree
Documentation/bpf/linux-notes.rst: WARNING: document isn't included in any toctree
Add these documentations to the table of contents (index.rst) of BPF
documentation to fix the warnings.
Link: https://lore.kernel.org/linux-doc/[email protected]/
Fixes: 6c7aaffb24efbd ("bpf, docs: Move Clang notes to a separate file")
Fixes: 6166da0a02cde2 ("bpf, docs: Move legacy packet instructions to a separate file")
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Bagas Sanjaya <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.1
This has been a very quiet release for the core but quite a busy one for
drivers with a big crop of new drivers and lots of feature additions and
fixes to existing ones:
- A new string helper parse_int_array_user().
- Improvements to the SOF IPC4 code, especially around trace.
- Support for AMD Rembrant DSPs, AMD Pink Sardine ACP 6.2, Apple Silcon
systems, Everest ES8326, Intel Sky Lake and Kaby Lake, MediaTek
MT8186 support, NXP i.MX8ULP DSPs, Qualcomm SC8280XP, SM8250 and SM8450
and Texas Instruments SRC4392
There is a conflict with the conversion of I2C remove functions to void
in the cs42l42 driver which is fairly straightforward to resolve but
should be highlighted to Linus.
|
|
Christophe Leroy reported a ~80ms latency spike
happening at first TCP connect() time.
This is because __inet_hash_connect() uses get_random_once()
to populate a perturbation table which became quite big
after commit 4c2c8f03a5ab ("tcp: increase source port perturb table to 2^16")
get_random_once() uses DO_ONCE(), which block hard irqs for the duration
of the operation.
This patch adds DO_ONCE_SLOW() which uses a mutex instead of a spinlock
for operations where we prefer to stay in process context.
Then __inet_hash_connect() can use get_random_slow_once()
to populate its perturbation table.
Fixes: 4c2c8f03a5ab ("tcp: increase source port perturb table to 2^16")
Fixes: 190cc82489f4 ("tcp: change source port randomizarion at connect() time")
Reported-by: Christophe Leroy <[email protected]>
Link: https://lore.kernel.org/netdev/CANn89iLAEYBaoYajy0Y9UmGFff5GPxDUoG-ErVB2jDdRNQ5Tug@mail.gmail.com/T/#t
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Willy Tarreau <[email protected]>
Tested-by: Christophe Leroy <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
syzbot is hitting skb_assert_len() warning at raw_sendmsg() for ieee802154
socket. What commit dc633700f00f726e ("net/af_packet: check len when
min_header_len equals to 0") does also applies to ieee802154 socket.
Link: https://syzkaller.appspot.com/bug?extid=5ea725c25d06fb9114c4
Reported-by: syzbot <[email protected]>
Fixes: fd1894224407c484 ("bpf: Don't redirect packets with invalid pkt_len")
Signed-off-by: Tetsuo Handa <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
wwan_register_ops calls wwan_create_default_link, which ends up in the
ipc_wwan_newlink callback that locks ipc_wwan->if_mutex. However, this
mutex is not yet initialized by that point. Fix it by moving mutex_init
above the wwan_register_ops call. This also makes the order of
operations in ipc_wwan_init symmetric to ipc_wwan_deinit.
Fixes: 83068395bbfc ("net: iosm: create default link via WWAN core")
Signed-off-by: Maxim Mikityanskiy <[email protected]>
Reviewed-by: M Chetan Kumar <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Subbaraya Sundeep says:
====================
net: Introduce macsec hardware offload for cn10k platform
CN10K-B and CNF10K-B variaints of CN10K silicon has macsec block(MCS)
to encrypt and decrypt packets at MAC/hardware level. This block is a
global resource with hardware resources like SecYs, SCs and SAs
and is in between NIX block and RPM LMAC. CN10K-B silicon has only
one MCS block which receives packets from all LMACS whereas
CNF10K-B has seven MCS blocks for seven LMACs. Both MCS blocks are
similar in operation except for few register offsets and some
configurations require writing to different registers. This patchset
introduces macsec hardware offloading support. AF driver manages hardware
resources and PF driver consumes them when macsec hardware offloading
is needed.
Patch 1 adds basic pci driver for both CN10K-B and CNF10K-B
silicons and initializes hardware block.
Patches 2 and 3 adds mailboxes to init, reset and manage
resources of the MCS block
Patch 4 adds a low priority rule in MCS TCAM so that the
traffic which do not need macsec processing can be sent/received
Patch 5 adds macsec stats collection support
Patch 6 adds interrupt handling support and any event in which
AF consumer is interested can be notified via mbox notification
Patch 7 adds debugfs support which helps in debugging packet
path
Patch 8 introduces macsec hardware offload feature for
PF netdev driver.
v3 changes:
Fixed clang and sparse warnings
v2 changes:
Fix build error by changing #ifdef CONFIG_MACSEC to
#if IS_ENABLED(CONFIG_MACSEC)
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
This patch introduces the macsec offload feature to cn10k
PF netdev driver. The macsec offload ops like adding, deleting
and updating SecYs, SCs, SAs and stats are supported. XPN support
will be added in later patches. Some stats use same counter in hardware
which means based on the SecY mode the same counter represents different
stat. Hence when SecY mode/policy is changed then snapshot of current
stats are captured. Also there is no provision to specify the unique
flow-id/SCI per packet to hardware hence different mac address needs to
be set for macsec interfaces.
Signed-off-by: Subbaraya Sundeep <[email protected]>
Signed-off-by: Sunil Goutham <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This patch adds debugfs entry to dump MCS secy, sc,
sa, flowid and port stats. This helps in debugging
the packet path and to figure out where exactly packet
was dropped.
Signed-off-by: Geetha sowjanya <[email protected]>
Signed-off-by: Sunil Goutham <[email protected]>
Signed-off-by: Subbaraya Sundeep <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Hardware triggers an interrupt for events like PN wrap to zero,
PN crosses set threshold. This interrupt is received
by the MCS_AF. MCS AF then finds the PF/VF to which SA is mapped
and notifies them using mcs_intr_notify mbox message.
PF/VF using mcs_intr_cfg mbox can configure the list
of interrupts for which they want to receive the
notification from AF.
Signed-off-by: Geetha sowjanya <[email protected]>
Signed-off-by: Vamsi Attunuru <[email protected]>
Signed-off-by: Sunil Goutham <[email protected]>
Signed-off-by: Subbaraya Sundeep <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add mailbox messages to return the resource stats to the
caller. Stats of SecY, SC and SAs as per the macsec standard,
TCAM flow id hits/miss, mailbox to clear the stats are
implemented.
Signed-off-by: Geetha sowjanya <[email protected]>
Signed-off-by: Ankur Dwivedi <[email protected]>
Signed-off-by: Sunil Goutham <[email protected]>
Signed-off-by: Subbaraya Sundeep <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Out of all the TCAM entries, reserve last TX and RX TCAM flow
entry(low priority) so that normal traffic can be sent out and
received. The traffic which needs macsec processing hits the
high priority TCAM flows. Also install a FLR handler to free
the allocated resources for PF/VF.
Signed-off-by: Geetha sowjanya <[email protected]>
Signed-off-by: Sunil Goutham <[email protected]>
Signed-off-by: Subbaraya Sundeep <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
To establish a macsec connection association netdev driver
needs hardware resources like SecY, TCAM flows, SCs and SAs.
This patch manages allocating, freeing and configuring those
resources. AF consumers can request resources and configure them
via these mailbox messages. AF can allocate until it runs out of
hardware resources.
Signed-off-by: Geetha sowjanya <[email protected]>
Signed-off-by: Vamsi Attunuru <[email protected]>
Signed-off-by: Sunil Goutham <[email protected]>
Signed-off-by: Subbaraya Sundeep <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
There are set of configurations to be done at MCS port level like
bringing port out of reset, making port as operational or bypass.
This patch adds all the port related mailbox message handlers
so that AF consumers can use them.
Signed-off-by: Geetha sowjanya <[email protected]>
Signed-off-by: Vamsi Attunuru <[email protected]>
Signed-off-by: Sunil Goutham <[email protected]>
Signed-off-by: Subbaraya Sundeep <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
CN10K-B and CNF10K-B has macsec block(MCS) to encrypt and
decrypt packets at MAC level. This block is a global resource
with hardware resources like SecYs, SCs and SAs and is in
between NIX block and RPM LMAC. CN10K-B silicon has only one MCS
block which receives packets from all LMACS whereas CNF10K-B has
seven MCS blocks for seven LMACs. Both MCS blocks are
similar in operation except for few register offsets and some
configurations require writing to different registers. Those
differences between IPs are handled using separate ops.
This patch adds basic driver and does the initial hardware
calibration and parser configuration.
Signed-off-by: Geetha sowjanya <[email protected]>
Signed-off-by: Vamsi Attunuru <[email protected]>
Signed-off-by: Sunil Goutham <[email protected]>
Signed-off-by: Subbaraya Sundeep <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This frees "mac" and tries to display its address as part of the error
message on the next line. Swap the order.
Fixes: fd3040b9394c ("net: ethernet: Add driver for Sunplus SP7021")
Signed-off-by: Zheng Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Horatiu Vultur says:
====================
net: lan966x: Add police and mirror using tc-matchall
Add tc-matchall classifier offload support both for ingress and egress.
For this add support for the port police and port mirroring action support.
Port police can happen only on ingress while port mirroring is supported
both on ingress and egress
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Add support for port mirroring. It is possible to mirror only one port
at a time and it is possible to have both ingress and egress mirroring.
Frames injected by the CPU don't get egress mirrored because they are
bypassing the analyzer module.
Signed-off-by: Horatiu Vultur <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add support for port police. It is possible to police only on the
ingress side. To be able to add police support also it was required to
add tc-matchall classifier offload support.
Signed-off-by: Horatiu Vultur <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This patch optimizes the RX buffer management by using the page
pool. The purpose for this change is to prepare for the following
XDP support. The current driver uses one frame per page for easy
management.
Added __maybe_unused attribute to the following functions to avoid
the compiling warning. Those functions will be removed by a separate
patch once this page pool solution is accepted.
- fec_enet_new_rxbdp
- fec_enet_copybreak
The following are the comparing result between page pool implementation
and the original implementation (non page pool).
--- small packet (64 bytes) testing are almost the same
--- no matter what the implementation is
--- on both i.MX8 and i.MX6SX platforms.
shenwei@5810:~/pktgen$ iperf -c 10.81.16.245 -w 2m -i 1 -l 64
------------------------------------------------------------
Client connecting to 10.81.16.245, TCP port 5001
TCP window size: 416 KByte (WARNING: requested 1.91 MByte)
------------------------------------------------------------
[ 1] local 10.81.17.20 port 39728 connected with 10.81.16.245 port 5001
[ ID] Interval Transfer Bandwidth
[ 1] 0.0000-1.0000 sec 37.0 MBytes 311 Mbits/sec
[ 1] 1.0000-2.0000 sec 36.6 MBytes 307 Mbits/sec
[ 1] 2.0000-3.0000 sec 37.2 MBytes 312 Mbits/sec
[ 1] 3.0000-4.0000 sec 37.1 MBytes 312 Mbits/sec
[ 1] 4.0000-5.0000 sec 37.2 MBytes 312 Mbits/sec
[ 1] 5.0000-6.0000 sec 37.2 MBytes 312 Mbits/sec
[ 1] 6.0000-7.0000 sec 37.2 MBytes 312 Mbits/sec
[ 1] 7.0000-8.0000 sec 37.2 MBytes 312 Mbits/sec
[ 1] 0.0000-8.0943 sec 299 MBytes 310 Mbits/sec
--- Page Pool implementation on i.MX8 ----
shenwei@5810:~$ iperf -c 10.81.16.245 -w 2m -i 1
------------------------------------------------------------
Client connecting to 10.81.16.245, TCP port 5001
TCP window size: 416 KByte (WARNING: requested 1.91 MByte)
------------------------------------------------------------
[ 1] local 10.81.17.20 port 43204 connected with 10.81.16.245 port 5001
[ ID] Interval Transfer Bandwidth
[ 1] 0.0000-1.0000 sec 111 MBytes 933 Mbits/sec
[ 1] 1.0000-2.0000 sec 111 MBytes 934 Mbits/sec
[ 1] 2.0000-3.0000 sec 112 MBytes 935 Mbits/sec
[ 1] 3.0000-4.0000 sec 111 MBytes 933 Mbits/sec
[ 1] 4.0000-5.0000 sec 111 MBytes 934 Mbits/sec
[ 1] 5.0000-6.0000 sec 111 MBytes 933 Mbits/sec
[ 1] 6.0000-7.0000 sec 111 MBytes 931 Mbits/sec
[ 1] 7.0000-8.0000 sec 112 MBytes 935 Mbits/sec
[ 1] 8.0000-9.0000 sec 111 MBytes 933 Mbits/sec
[ 1] 9.0000-10.0000 sec 112 MBytes 935 Mbits/sec
[ 1] 0.0000-10.0077 sec 1.09 GBytes 933 Mbits/sec
--- Non Page Pool implementation on i.MX8 ----
shenwei@5810:~$ iperf -c 10.81.16.245 -w 2m -i 1
------------------------------------------------------------
Client connecting to 10.81.16.245, TCP port 5001
TCP window size: 416 KByte (WARNING: requested 1.91 MByte)
------------------------------------------------------------
[ 1] local 10.81.17.20 port 49154 connected with 10.81.16.245 port 5001
[ ID] Interval Transfer Bandwidth
[ 1] 0.0000-1.0000 sec 104 MBytes 868 Mbits/sec
[ 1] 1.0000-2.0000 sec 105 MBytes 878 Mbits/sec
[ 1] 2.0000-3.0000 sec 105 MBytes 881 Mbits/sec
[ 1] 3.0000-4.0000 sec 105 MBytes 879 Mbits/sec
[ 1] 4.0000-5.0000 sec 105 MBytes 878 Mbits/sec
[ 1] 5.0000-6.0000 sec 105 MBytes 878 Mbits/sec
[ 1] 6.0000-7.0000 sec 104 MBytes 875 Mbits/sec
[ 1] 7.0000-8.0000 sec 104 MBytes 875 Mbits/sec
[ 1] 8.0000-9.0000 sec 104 MBytes 873 Mbits/sec
[ 1] 9.0000-10.0000 sec 104 MBytes 875 Mbits/sec
[ 1] 0.0000-10.0073 sec 1.02 GBytes 875 Mbits/sec
--- Page Pool implementation on i.MX6SX ----
shenwei@5810:~/pktgen$ iperf -c 10.81.16.245 -w 2m -i 1
------------------------------------------------------------
Client connecting to 10.81.16.245, TCP port 5001
TCP window size: 416 KByte (WARNING: requested 1.91 MByte)
------------------------------------------------------------
[ 1] local 10.81.17.20 port 57288 connected with 10.81.16.245 port 5001
[ ID] Interval Transfer Bandwidth
[ 1] 0.0000-1.0000 sec 78.8 MBytes 661 Mbits/sec
[ 1] 1.0000-2.0000 sec 82.5 MBytes 692 Mbits/sec
[ 1] 2.0000-3.0000 sec 82.4 MBytes 691 Mbits/sec
[ 1] 3.0000-4.0000 sec 82.4 MBytes 691 Mbits/sec
[ 1] 4.0000-5.0000 sec 82.5 MBytes 692 Mbits/sec
[ 1] 5.0000-6.0000 sec 82.4 MBytes 691 Mbits/sec
[ 1] 6.0000-7.0000 sec 82.5 MBytes 692 Mbits/sec
[ 1] 7.0000-8.0000 sec 82.4 MBytes 691 Mbits/sec
[ 1] 8.0000-9.0000 sec 82.4 MBytes 691 Mbits/sec
[ 1] 9.0000-9.5506 sec 45.0 MBytes 686 Mbits/sec
[ 1] 0.0000-9.5506 sec 783 MBytes 688 Mbits/sec
--- Non Page Pool implementation on i.MX6SX ----
shenwei@5810:~/pktgen$ iperf -c 10.81.16.245 -w 2m -i 1
------------------------------------------------------------
Client connecting to 10.81.16.245, TCP port 5001
TCP window size: 416 KByte (WARNING: requested 1.91 MByte)
------------------------------------------------------------
[ 1] local 10.81.17.20 port 36486 connected with 10.81.16.245 port 5001
[ ID] Interval Transfer Bandwidth
[ 1] 0.0000-1.0000 sec 70.5 MBytes 591 Mbits/sec
[ 1] 1.0000-2.0000 sec 64.5 MBytes 541 Mbits/sec
[ 1] 2.0000-3.0000 sec 73.6 MBytes 618 Mbits/sec
[ 1] 3.0000-4.0000 sec 73.6 MBytes 618 Mbits/sec
[ 1] 4.0000-5.0000 sec 72.9 MBytes 611 Mbits/sec
[ 1] 5.0000-6.0000 sec 73.4 MBytes 616 Mbits/sec
[ 1] 6.0000-7.0000 sec 73.5 MBytes 617 Mbits/sec
[ 1] 7.0000-8.0000 sec 73.4 MBytes 616 Mbits/sec
[ 1] 8.0000-9.0000 sec 73.4 MBytes 616 Mbits/sec
[ 1] 9.0000-10.0000 sec 73.9 MBytes 620 Mbits/sec
[ 1] 0.0000-10.0174 sec 723 MBytes 605 Mbits/sec
Signed-off-by: Shenwei Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
DECnet was removed by commit 1202cdd66531 ("Remove DECnet support from
kernel"). Let's also revome its flow structure.
Compile-tested only (allmodconfig).
Signed-off-by: Guillaume Nault <[email protected]>
Acked-by: Stephen Hemminger <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
bnx2x_tpa_stop() allocates a memory chunk from new_data with
bnx2x_frag_alloc(). The new_data should be freed when gets some error.
But when "pad + len > fp->rx_buf_size" is true, bnx2x_tpa_stop() returns
without releasing the new_data, which will lead to a memory leak.
We should free the new_data with bnx2x_frag_free() when "pad + len >
fp->rx_buf_size" is true.
Fixes: 07b0f00964def8af9321cfd6c4a7e84f6362f728 ("bnx2x: fix possible panic under memory stress")
Signed-off-by: Jianglei Nie <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Remove PTP_PF_EXTTS support for non-PCI11x1x devices since they do not support
the PTP-IO Input event triggered timestamping mechanisms added
Fixes: 60942c397af6 ("net: lan743x: Add support for PTP-IO Event Input External Timestamp (extts)")
Signed-off-by: Raju Lakkaraju <[email protected]>
Reviewed-by: Horatiu Vultur <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Current GRO stack only supports incoming packets containing
one frame/MSS.
This patch changes GRO to accept packets that are already GRO.
HW-GRO (aka RSC for some vendors) is very often limited in presence
of interleaved packets. Linux SW GRO stack can complete the job
and provide larger GRO packets, thus reducing rate of ACK packets
and cpu overhead.
This also means BIG TCP can still be used, even if HW-GRO/RSC was
able to cook ~64 KB GRO packets.
v2: fix logic in tcp_gro_receive()
Only support TCP for the moment (Paolo)
Co-Developed-by: Eric Dumazet <[email protected]>
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: Coco Li <[email protected]>
Acked-by: Paolo Abeni <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
As the kemdup could return NULL, it should be better to check the return
value and return error if fails.
Moreover, the return value of prestera_acl_ruleset_keymask_set() should
be checked by cascade.
Fixes: 604ba230902d ("net: prestera: flower template support")
Signed-off-by: Jiasheng Jiang <[email protected]>
Reviewed-by: Taras Chornyi<[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Mat Martineau says:
====================
mptcp: Fastclose edge cases and error handling
MPTCP has existing code to use the MP_FASTCLOSE option header, which
works like a RST for the MPTCP-level connection (regular RSTs only
affect specific subflows in MPTCP). This series has some improvements
for fastclose.
Patch 1 aligns fastclose socket error handling with TCP RST behavior on
TCP sockets.
Patch 2 adds use of MP_FASTCLOSE in some more edge cases, like file
descriptor close, FIN_WAIT timeout, and when the socket has unread data.
Patch 3 updates the fastclose self tests.
Patch 4 does not change any code, just fixes some outdated comments.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
The MPTCP data path is quite complex and hard to understend even
without some foggy comments referring to modified code and/or
completely misleading from the beginning.
Update a few of them to more accurately describing the current
status.
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
After the previous patches, the MPTCP protocol can generate
fast-closes on both ends of the connection. Rework the relevant
test-case to carefully trigger the fast-close code-path on a
single end at the time, while ensuring than a predictable amount
of data is spooled on both ends.
Additionally add another test-cases for the passive socket
fast-close.
Reviewed-by: Matthieu Baerts <[email protected]>
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Daire reported a user-space application hang-up when the
peer is forcibly closed before the data transfer completion.
The relevant application expects the peer to either
do an application-level clean shutdown or a transport-level
connection reset.
We can accommodate a such user by extending the fastclose
usage: at fd close time, if the msk socket has some unread
data, and at FIN_WAIT timeout.
Note that at MPTCP close time we must ensure that the TCP
subflows will reset: set the linger socket option to a suitable
value.
Reviewed-by: Matthieu Baerts <[email protected]>
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
When an mptcp socket is closed due to an incoming FASTCLOSE
option, so specific sk_err is set and later syscall will
fail usually with EPIPE.
Align the current fastclose error handling with TCP reset,
properly setting the socket error according to the current
msk state and propagating such error.
Additionally sendmsg() is currently not handling properly
the sk_err, always returning EPIPE.
Reviewed-by: Matthieu Baerts <[email protected]>
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Marek Behún says:
====================
RollBall / Hilink / Turris 10G copper SFP support
I am resurrecting my attempt to add support for RollBall / Hilink /
Turris 10G copper SFPs modules.
The modules contain Marvell 88X3310 PHY, which can communicate with
the system via sgmii, 2500base-x, 5gbase-r, 10gbase-r or usxgmii mode.
Some of the patches I've taken from Russell King's net-queue [1]
(with some rebasing).
The important change from my previous attempts are:
- I am including the changes needed to phylink and marvell10g driver,
so that the 88X3310 PHY is configured to use PHY modes supported by
the host (the PHY defaults to use 10gbase-r only on host's side)
- I have changed the patch that informs phylib about the interfaces
supported by the host (patch 5 of this series): it now fills in the
phydev->host_interfaces member only when connecting a PHY that is
inside a SFP module. This may change in the future.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
This adds support for multigig copper SFP modules from RollBall/Hilink.
These modules have a specific way to access clause 45 registers of the
internal PHY.
We also need to wait at least 22 seconds after deasserting TX disable
before accessing the PHY. The code waits for 25 seconds just to be sure.
Signed-off-by: Marek Behún <[email protected]>
Reviewed-by: Russell King <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Some multigig SFPs from RollBall and Hilink do not expose functional
MDIO access to the internal PHY of the SFP via I2C address 0x56
(although there seems to be read-only clause 22 access on this address).
Instead these SFPs PHY can be accessed via I2C via the SFP Enhanced
Digital Diagnostic Interface - I2C address 0x51. The SFP_PAGE has to be
selected to 3 and the password must be filled with 0xff bytes for this
PHY communication to work.
This extends the mdio-i2c driver to support this protocol by adding a
special parameter to mdio_i2c_alloc function via which this RollBall
protocol can be selected.
Signed-off-by: Marek Behún <[email protected]>
Cc: Andrew Lunn <[email protected]>
Cc: Russell King <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Instead of configuring the I2C mdiobus when SFP driver is probed,
create/destroy the mdiobus before the PHY is probed for/after it is
released.
This way we can tell the mdio-i2c code which protocol to use for each
SFP transceiver.
Move the code that determines MDIO I2C protocol from
sfp_sm_probe_for_phy() to sfp_sm_mod_probe(), where most of the SFP ID
parsing is done. Don't allocate I2C bus if no PHY is expected.
Signed-off-by: Marek Behún <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add macros SFP_QUIRK(), SFP_QUIRK_M() and SFP_QUIRK_F() for defining SFP
quirk table entries. Use them to deduplicate the code a little bit.
Signed-off-by: Marek Behún <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|