| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks into timers/core
Pull updates for posix timers and related signal code from Frederic Weisbecker:
* Prepare posix timers selftests for upcoming changes:
- Check signal behaviour sanity against SIG_IGN
- Check signal behaviour sanity against timer
reprogramm/deletion
- Check SIGEV_NONE pending expiry read
- Check interval timer read on a pending SIGNAL
- Check correct overrun count after signal block/unblock
* Various consolidations:
- timer get/set
- signal queue
* Fixes:
- Correctly read SIGEV_NONE timers
- Forward expiry while reading expired interval timers
with pending signal
- Don't arm SIGEV_NONE timers
* Various cleanups all over the place
|
|
These really can be handled gracefully without killing the machine.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
Reviewed-by: Oleg Nesterov <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
|
|
The task pointer which is handed to dequeue_signal() is always current. The
argument along with the first comment about signalfd in that function is
confusing at best. Remove it and use current internally.
Update the stale comment for dequeue_signal() while at it.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
Reviewed-by: Oleg Nesterov <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
|
|
Rename posix_timer_event() to posix_timer_queue_signal() as this is what
the function is about.
Consolidate the requeue pending and deactivation updates into that function
as there is no point in doing this in all incarnations of posix timers.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
|
|
Posix CPU timers are not updating k_itimer::it_active which makes it
impossible to base decisions in the common posix timer code on it.
Update it when queueing or dequeueing posix CPU timers.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
Reviewed-by: Anna-Maria Behnsen <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
|
|
hrtimer based and CPU timers have their own way to install the new interval
and to reset overrun and signal handling related data.
Create a helper function and do the same operation for all variants.
This also makes the handling of the interval consistent. It's only stored
when the timer is actually armed, i.e. timer->it_value != 0. Before that it
was stored unconditionally for posix CPU timers and conditionally for the
other posix timers.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
|
|
No requirement for a real list. Spare a few bytes.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
|
|
Keeping the overrun count of the previous setup around is just wrong. The
new setting has nothing to do with the previous one and has to start from a
clean slate.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
|
|
No point in doing this all over the place.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
Reviewed-by: Anna-Maria Behnsen <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
|
|
Avoid the late sighand lock/unlock dance when a timer is not armed to
enforce reevaluation of the timer base so that the process wide CPU timer
sampling can be disabled.
Do it right at the point where the arming decision is made which already
has sighand locked.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
Reviewed-by: Anna-Maria Behnsen <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
|
|
A leftover from historical code which describes fiction.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
|
|
posix_cpu_timer_set() uses @val as variable for the current time. That's
confusing at best.
Use @now as anywhere else and rewrite the confusing comment about clock
sampling.
No functional change.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
|
|
There is no point in arming SIGEV_NONE timers as they never deliver a
signal. timer_gettime() is handling the expiry time correctly and that's
all SIGEV_NONE timers care about.
Prevent arming them and remove the expiry handler code which just disarms
them.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
Reviewed-by: Anna-Maria Behnsen <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
|
|
Reuse the split out __posix_cpu_timer_get() function which does already the
right thing.
No functional change.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
Reviewed-by: Anna-Maria Behnsen <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
|
|
Expired SIGEV_NONE oneshot timers must return 0 nsec for the expiry time in
timer_get(), but the posix CPU timer implementation returns 1 nsec.
Add the missing conditional.
This will be cleaned up in a follow up patch.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
|
|
Expired SIGEV_NONE oneshot timers must return 0 nsec for the expiry time in
timer_get(), but the posix CPU timer implementation returns 1 nsec.
Add the missing conditional.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
|
|
timer_gettime() must return the remaining time to the next expiry of a
timer or 0 if the timer is not armed and no signal pending, but posix CPU
timers fail to forward a timer which is already expired.
Add the required logic to address that.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
|
|
There is no point to return the interval for timers which have been
disarmed.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
|
|
In preparation for addressing issues in the timer_get() and timer_set()
functions of posix CPU timers.
No functional change.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
Reviewed-by: Anna-Maria Behnsen <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
|
|
When a timer signal is blocked and later unblocked then one signal should
be delivered with the correct number of overruns since the timer was queued.
Validate that behaviour.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
|
|
timer_gettime() must return the correct expiry time for interval timers
even when the timer is not armed, which is the case when a signal is
pending but blocked.
Works correctly for regular posix timers, but not for posix CPU timers.
Add a selftest to validate the fixes.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
|
|
Posix timers with a delivery mode of SIGEV_NONE deliver no signals but the
remaining expiry time must be readable via timer_gettime() for both one
shot and interval timers.
That's implemented correctly for regular posix timers but broken for posix
CPU timers.
Add a self test so the fixes can be verified.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
|
|
Add a test case to validate correct behaviour vs. timer reprogramming and
deletion.
The handling of queued signals in case of timer reprogramming or deletion
is inconsistent at best.
POSIX does not really specify the behaviour for that:
- "The effect of disarming or resetting a timer with pending expiration
notifications is unspecified."
- "The disposition of pending signals for the deleted timer is
unspecified."
In both cases it is reasonable to expect that pending signals are
discarded. Especially in the reprogramming case it does not make sense to
account for previous overruns or to deliver a signal for a timer which
has been disarmed.
Add tests to validate that no unexpected signals are delivered. They fail
for now until the signal and posix timer code is updated.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
|
|
Add a test case to validate correct behaviour vs. SIG_IGN.
The posix specification states:
"Setting a signal action to SIG_IGN for a signal that is pending shall
cause the pending signal to be discarded, whether or not it is blocked."
The kernel implements this in the signal handling code, but due to the way
how posix timers are handling SIG_IGN for periodic timers, the behaviour
after installing a real handler again is inconsistent and suprising.
The following sequence is expected to deliver a signal:
install_handler(SIG);
block_signal(SIG);
timer_create(...); <- Should send SIG
timer_settime(value=100ms, interval=100ms);
sleep(1); <- Timer expires and queues signal, timer is not rearmed
as that should happen in the signal delivery path
ignore_signal(SIG); <- Discards queued signal
install_handler(SIG); <- Restore handler, should rearm but does not
sleep(1);
unblock_signal(SIG); <- Should deliver one signal with overrun count
set in siginfo
This fails because nothing rearms the timer when the signal handler is
restored. Add a test for this case which fails until the signal and posix
timer code is fixed.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
|
|
No point in returning to main() on fatal errors. Just exit right away.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
Reviewed-by: Anna-Maria Behnsen <[email protected]>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix RPM package build error caused by an incorrect locale setup
- Mark modules.weakdep as ghost in RPM package
- Fix the odd combination of -S and -c in stack protector scripts,
which is an error with the latest Clang
* tag 'kbuild-fixes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Fix '-S -c' in x86 stack protector scripts
kbuild: rpm-pkg: ghost modules.weakdep file
kbuild: rpm-pkg: Fix C locale setup
|
|
This simplifies the min_t() and max_t() macros by no longer making them
work in the context of a C constant expression.
That means that you can no longer use them for static initializers or
for array sizes in type definitions, but there were only a couple of
such uses, and all of them were converted (famous last words) to use
MIN_T/MAX_T instead.
Cc: David Laight <[email protected]>
Cc: Lorenzo Stoakes <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Commit 3a7e02c040b1 ("minmax: avoid overly complicated constant
expressions in VM code") added the simpler MIN_T/MAX_T macros in order
to avoid some excessive expansion from the rather complicated regular
min/max macros.
The complexity of those macros stems from two issues:
(a) trying to use them in situations that require a C constant
expression (in static initializers and for array sizes)
(b) the type sanity checking
and MIN_T/MAX_T avoids both of these issues.
Now, in the whole (long) discussion about all this, it was pointed out
that the whole type sanity checking is entirely unnecessary for
min_t/max_t which get a fixed type that the comparison is done in.
But that still leaves min_t/max_t unnecessarily complicated due to
worries about the C constant expression case.
However, it turns out that there really aren't very many cases that use
min_t/max_t for this, and we can just force-convert those.
This does exactly that.
Which in turn will then allow for much simpler implementations of
min_t()/max_t(). All the usual "macros in all upper case will evaluate
the arguments multiple times" rules apply.
We should do all the same things for the regular min/max() vs MIN/MAX()
cases, but that has the added complexity of various drivers defining
their own local versions of MIN/MAX, so that needs another level of
fixes first.
Link: https://lore.kernel.org/all/[email protected]/
Cc: David Laight <[email protected]>
Cc: Lorenzo Stoakes <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull UBI and UBIFS updates from Richard Weinberger:
- Many fixes for power-cut issues by Zhihao Cheng
- Another ubiblock error path fix
- ubiblock section mismatch fix
- Misc fixes all over the place
* tag 'ubifs-for-linus-6.11-rc1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
ubi: Fix ubi_init() ubiblock_exit() section mismatch
ubifs: add check for crypto_shash_tfm_digest
ubifs: Fix inconsistent inode size when powercut happens during appendant writing
ubi: block: fix null-pointer-dereference in ubiblock_create()
ubifs: fix kernel-doc warnings
ubifs: correct UBIFS_DFS_DIR_LEN macro definition and improve code clarity
mtd: ubi: Restore missing cleanup on ubi_init() failure path
ubifs: dbg_orphan_check: Fix missed key type checking
ubifs: Fix unattached inode when powercut happens in creating
ubifs: Fix space leak when powercut happens in linking tmpfile
ubifs: Move ui->data initialization after initializing security
ubifs: Fix adding orphan entry twice for the same inode
ubifs: Remove insert_dead_orphan from replaying orphan process
Revert "ubifs: ubifs_symlink: Fix memleak of inode->i_link in error path"
ubifs: Don't add xattr inode into orphan area
ubifs: Fix unattached xattr inode if powercut happens after deleting
mtd: ubi: avoid expensive do_div() on 32-bit machines
mtd: ubi: make ubi_class constant
ubi: eba: properly rollback inside self_check_eba
|
|
After a recent change in clang to stop consuming all instances of '-S'
and '-c' [1], the stack protector scripts break due to the kernel's use
of -Werror=unused-command-line-argument to catch cases where flags are
not being properly consumed by the compiler driver:
$ echo | clang -o - -x c - -S -c -Werror=unused-command-line-argument
clang: error: argument unused during compilation: '-c' [-Werror,-Wunused-command-line-argument]
This results in CONFIG_STACKPROTECTOR getting disabled because
CONFIG_CC_HAS_SANE_STACKPROTECTOR is no longer set.
'-c' and '-S' both instruct the compiler to stop at different stages of
the pipeline ('-S' after compiling, '-c' after assembling), so having
them present together in the same command makes little sense. In this
case, the test wants to stop before assembling because it is looking at
the textual assembly output of the compiler for either '%fs' or '%gs',
so remove '-c' from the list of arguments to resolve the error.
All versions of GCC continue to work after this change, along with
versions of clang that do or do not contain the change mentioned above.
Cc: [email protected]
Fixes: 4f7fd4d7a791 ("[PATCH] Add the -fstack-protector option to the CFLAGS")
Fixes: 60a5317ff0f4 ("x86: implement x86_32 stack protector")
Link: https://github.com/llvm/llvm-project/commit/6461e537815f7fa68cef06842505353cf5600e9c [1]
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
Since ubiblock_exit() is now called from an init function,
the __exit section no longer makes sense.
Cc: Ben Hutchings <[email protected]>
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Signed-off-by: Richard Weinberger <[email protected]>
Reviewed-by: Zhihao Cheng <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown:
- Enable turbostat extensions to add both perf and PMT (Intel
Platform Monitoring Technology) counters via the cmdline
- Demonstrate PMT access with built-in support for Meteor Lake's
Die C6 counter
* tag 'v6.11-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: version 2024.07.26
tools/power turbostat: Include umask=%x in perf counter's config
tools/power turbostat: Document PMT in turbostat.8
tools/power turbostat: Add MTL's PMT DC6 builtin counter
tools/power turbostat: Add early support for PMT counters
tools/power turbostat: Add selftests for added perf counters
tools/power turbostat: Add selftests for SMI, APERF and MPERF counters
tools/power turbostat: Move verbose counter messages to level 2
tools/power turbostat: Move debug prints from stdout to stderr
tools/power turbostat: Fix typo in turbostat.8
tools/power turbostat: Add perf added counter example to turbostat.8
tools/power turbostat: Fix formatting in turbostat.8
tools/power turbostat: Extend --add option with perf counters
tools/power turbostat: Group SMI counter with APERF and MPERF
tools/power turbostat: Add ZERO_ARRAY for zero initializing builtin array
tools/power turbostat: Replace enum rapl_source and cstate_source with counter_source
tools/power turbostat: Remove anonymous union from rapl_counter_info_t
tools/power/turbostat: Switch to new Intel CPU model defines
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL updates from Dave Jiang:
"Core:
- A CXL maturity map has been added to the documentation to detail
the current state of CXL enabling.
It provides the status of the current state of various CXL features
to inform current and future contributors of where things are and
which areas need contribution.
- A notifier handler has been added in order for a newly created CXL
memory region to trigger the abstract distance metrics calculation.
This should bring parity for CXL memory to the same level vs
hotplugged DRAM for NUMA abstract distance calculation. The
abstract distance reflects relative performance used for memory
tiering handling.
- An addition for XOR math has been added to address the CXL DPA to
SPA translation.
CXL address translation did not support address interleave math
with XOR prior to this change.
Fixes:
- Fix to address race condition in the CXL memory hotplug notifier
- Add missing MODULE_DESCRIPTION() for CXL modules
- Fix incorrect vendor debug UUID define
Misc:
- A warning has been added to inform users of an unsupported
configuration when mixing CXL VH and RCH/RCD hierarchies
- The ENXIO error code has been replaced with EBUSY for inject poison
limit reached via debugfs and cxl-test support
- Moving the PCI config read in cxl_dvsec_rr_decode() to avoid
unnecessary PCI config reads
- A refactor to a common struct for DRAM and general media CXL
events"
* tag 'cxl-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/core/pci: Move reading of control register to immediately before usage
cxl: Remove defunct code calculating host bridge target positions
cxl/region: Verify target positions using the ordered target list
cxl: Restore XOR'd position bits during address translation
cxl/core: Fold cxl_trace_hpa() into cxl_dpa_to_hpa()
cxl/test: Replace ENXIO with EBUSY for inject poison limit reached
cxl/memdev: Replace ENXIO with EBUSY for inject poison limit reached
cxl/acpi: Warn on mixed CXL VH and RCH/RCD Hierarchy
cxl/core: Fix incorrect vendor debug UUID define
Documentation: CXL Maturity Map
cxl/region: Simplify cxl_region_nid()
cxl/region: Support to calculate memory tier abstract distance
cxl/region: Fix a race condition in memory hotplug notifier
cxl: add missing MODULE_DESCRIPTION() macros
cxl/events: Use a common struct for DRAM and General Media events
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/krisman/unicode
Pull unicode update from Gabriel Krisman Bertazi:
"Two small fixes to silence the compiler and static analyzers tools
from Ben Dooks and Jeff Johnson"
* tag 'unicode-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krisman/unicode:
unicode: add MODULE_DESCRIPTION() macros
unicode: make utf8 test count static
|
|
In the same way as for other similar files, mark as ghost the new file
generated by depmod for configured weak dependencies for modules,
modules.weakdep, so that although it is not included in the package,
claim the ownership on it.
Signed-off-by: Jose Ignacio Tornos Martinez <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
git://git.samba.org/sfrench/cifs-2.6
Pull more smb client updates from Steve French:
- fix for potential null pointer use in init cifs
- additional dynamic trace points to improve debugging of some common
scenarios
- two SMB1 fixes (one addressing reconnect with POSIX extensions, one a
mount parsing error)
* tag '6.11-rc-smb-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
smb3: add dynamic trace point for session setup key expired failures
smb3: add four dynamic tracepoints for copy_file_range and reflink
smb3: add dynamic tracepoint for reflink errors
cifs: mount with "unix" mount option for SMB1 incorrectly handled
cifs: fix reconnect with SMB1 UNIX Extensions
cifs: fix potential null pointer use in destroy_workqueue in init_cifs error path
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Fix request without payloads cleanup (Leon)
- Use new protection information format (Francis)
- Improved debug message for lost pci link (Bart)
- Another apst quirk (Wang)
- Use appropriate sysfs api for printing chars (Markus)
- ublk async device deletion fix (Ming)
- drbd kerneldoc fixups (Simon)
- Fix deadlock between sd removal and release (Yang)
* tag 'block-6.11-20240726' of git://git.kernel.dk/linux:
nvme-pci: add missing condition check for existence of mapped data
ublk: fix UBLK_CMD_DEL_DEV_ASYNC handling
block: fix deadlock between sd_remove & sd_release
drbd: Add peer_device to Kernel doc
nvme-core: choose PIF from QPIF if QPIFS supports and PIF is QTYPE
nvme-pci: Fix the instructions for disabling power management
nvme: remove redundant bdev local variable
nvme-fabrics: Use seq_putc() in __nvmf_concat_opt_tokens()
nvme/pci: Add APST quirk for Lenovo N60z laptop
|
|
Pull io_uring fixes from Jens Axboe:
- Fix a syzbot issue for the msg ring cache added in this release. No
ill effects from this one, but it did make KMSAN unhappy (me)
- Sanitize the NAPI timeout handling, by unifying the value handling
into all ktime_t rather than converting back and forth (Pavel)
- Fail NAPI registration for IOPOLL rings, it's not supported (Pavel)
- Fix a theoretical issue with ring polling and cancelations (Pavel)
- Various little cleanups and fixes (Pavel)
* tag 'io_uring-6.11-20240726' of git://git.kernel.dk/linux:
io_uring/napi: pass ktime to io_napi_adjust_timeout
io_uring/napi: use ktime in busy polling
io_uring/msg_ring: fix uninitialized use of target_req->flags
io_uring: align iowq and task request error handling
io_uring: kill REQ_F_CANCEL_SEQ
io_uring: simplify io_uring_cmd return
io_uring: fix io_match_task must_hold
io_uring: don't allow netpolling with SETUP_IOPOLL
io_uring: tighten task exit cancellations
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"This contains two fixes for this merge window:
VFS:
- I noticed that it is possible for a privileged user to mount most
filesystems with a non-initial user namespace in sb->s_user_ns.
When fsopen() is called in a non-init namespace the caller's
namespace is recorded in fs_context->user_ns. If the returned file
descriptor is then passed to a process privileged in init_user_ns,
that process can call fsconfig(fd_fs, FSCONFIG_CMD_CREATE*),
creating a new superblock with sb->s_user_ns set to the namespace
of the process which called fsopen().
This is problematic as only filesystems that raise FS_USERNS_MOUNT
are known to be able to support a non-initial s_user_ns. Others may
suffer security issues, on-disk corruption or outright crash the
kernel. Prevent that by restricting such delegation to filesystems
that allow FS_USERNS_MOUNT.
Note, that this delegation requires a privileged process to
actually create the superblock so either the privileged process is
cooperaing or someone must have tricked a privileged process into
operating on a fscontext file descriptor whose origin it doesn't
know (a stupid idea).
The bug dates back to about 5 years afaict.
Misc:
- Fix hostfs parsing when the mount request comes in via the legacy
mount api.
In the legacy mount api hostfs allows to specify the host directory
mount without any key.
Restore that behavior"
* tag 'vfs-6.11-rc1.fixes.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
hostfs: fix the host directory parse when mounting.
fs: don't allow non-init s_user_ns for filesystems without FS_USERNS_MOUNT
|
|
Pull Rust updates from Miguel Ojeda:
"The highlight is the establishment of a minimum version for the Rust
toolchain, including 'rustc' (and bundled tools) and 'bindgen'.
The initial minimum will be the pinned version we currently have, i.e.
we are just widening the allowed versions. That covers three stable
Rust releases: 1.78.0, 1.79.0, 1.80.0 (getting released tomorrow),
plus beta, plus nightly.
This should already be enough for kernel developers in distributions
that provide recent Rust compiler versions routinely, such as Arch
Linux, Debian Unstable (outside the freeze period), Fedora Linux,
Gentoo Linux (especially the testing channel), Nix (unstable) and
openSUSE Slowroll and Tumbleweed.
In addition, the kernel is now being built-tested by Rust's pre-merge
CI. That is, every change that is attempting to land into the Rust
compiler is tested against the kernel, and it is merged only if it
passes. Similarly, the bindgen tool has agreed to build the kernel in
their CI too.
Thus, with the pre-merge CI in place, both projects hope to avoid
unintentional changes to Rust that break the kernel. This means that,
in general, apart from intentional changes on their side (that we will
need to workaround conditionally on our side), the upcoming Rust
compiler versions should generally work.
In addition, the Rust project has proposed getting the kernel into
stable Rust (at least solving the main blockers) as one of its three
flagship goals for 2024H2 [1].
I would like to thank Niko, Sid, Emilio et al. for their help
promoting the collaboration between Rust and the kernel.
Toolchain and infrastructure:
- Support several Rust toolchain versions.
- Support several bindgen versions.
- Remove 'cargo' requirement and simplify 'rusttest', thanks to
'alloc' having been dropped last cycle.
- Provide proper error reporting for the 'rust-analyzer' target.
'kernel' crate:
- Add 'uaccess' module with a safe userspace pointers abstraction.
- Add 'page' module with a 'struct page' abstraction.
- Support more complex generics in workqueue's 'impl_has_work!'
macro.
'macros' crate:
- Add 'firmware' field support to the 'module!' macro.
- Improve 'module!' macro documentation.
Documentation:
- Provide instructions on what packages should be installed to build
the kernel in some popular Linux distributions.
- Introduce the new kernel.org LLVM+Rust toolchains.
- Explain '#[no_std]'.
And a few other small bits"
Link: https://rust-lang.github.io/rust-project-goals/2024h2/index.html#flagship-goals [1]
* tag 'rust-6.11' of https://github.com/Rust-for-Linux/linux: (26 commits)
docs: rust: quick-start: add section on Linux distributions
rust: warn about `bindgen` versions 0.66.0 and 0.66.1
rust: start supporting several `bindgen` versions
rust: work around `bindgen` 0.69.0 issue
rust: avoid assuming a particular `bindgen` build
rust: start supporting several compiler versions
rust: simplify Clippy warning flags set
rust: relax most deny-level lints to warnings
rust: allow `dead_code` for never constructed bindings
rust: init: simplify from `map_err` to `inspect_err`
rust: macros: indent list item in `paste!`'s docs
rust: add abstraction for `struct page`
rust: uaccess: add typed accessors for userspace pointers
uaccess: always export _copy_[from|to]_user with CONFIG_RUST
rust: uaccess: add userspace pointers
kbuild: rust-analyzer: improve comment documentation
kbuild: rust-analyzer: better error handling
docs: rust: no_std is used
rust: alloc: add __GFP_HIGHMEM flag
rust: alloc: fix typo in docs for GFP_NOWAIT
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor
Pull apparmor updates from John Johansen:
"Cleanups
- optimization: try to avoid refing the label in apparmor_file_open
- remove useless static inline function is_deleted
- use kvfree_sensitive to free data->data
- fix typo in kernel doc
Bug fixes:
- unpack transition table if dfa is not present
- test: add MODULE_DESCRIPTION()
- take nosymfollow flag into account
- fix possible NULL pointer dereference
- fix null pointer deref when receiving skb during sock creation"
* tag 'apparmor-pr-2024-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
apparmor: unpack transition table if dfa is not present
apparmor: try to avoid refing the label in apparmor_file_open
apparmor: test: add MODULE_DESCRIPTION()
apparmor: take nosymfollow flag into account
apparmor: fix possible NULL pointer dereference
apparmor: fix typo in kernel doc
apparmor: remove useless static inline function is_deleted
apparmor: use kvfree_sensitive to free data->data
apparmor: Fix null pointer deref when receiving skb during sock creation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock fix from Mickaël Salaün:
"Jann Horn reported a sandbox bypass for Landlock. This includes the
fix and new tests. This should be backported"
* tag 'landlock-6.11-rc1-houdini-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Add cred_transfer test
landlock: Don't lose track of restrictions on cred_transfer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fix from Bartosz Golaszewski:
- don't use sprintf() with non-constant format string
* tag 'gpio-fixes-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: virtuser: avoid non-constant format string
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull more devicetree updates from Rob Herring:
"Most of this is a treewide change to of_property_for_each_u32() which
was small enough to do in one go before rc1 and avoids the need to
create of_property_for_each_u32_some_new_name().
- Treewide conversion of of_property_for_each_u32() to drop internal
arguments making struct property opaque
- Add binding for Amlogic A4 SoC watchdog
- Fix constraints for AD7192 'single-channel' property"
* tag 'devicetree-fixes-for-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: iio: adc: ad7192: Fix 'single-channel' constraints
of: remove internal arguments from of_property_for_each_u32()
dt-bindings: watchdog: add support for Amlogic A4 SoCs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Will Deacon:
"We're still resolving a regression with the handling of unexpected
page faults on SMMUv3, but we're not quite there with a fix yet.
- Fix NULL dereference when freeing domain in Unisoc SPRD driver
- Separate assignment statements with semicolons in AMD page-table
code
- Fix Tegra erratum workaround when the CPU is using 16KiB pages"
* tag 'iommu-fixes-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu: arm-smmu: Fix Tegra workaround for PAGE_SIZE mappings
iommu/amd: Convert comma to semicolon
iommu: sprd: Avoid NULL deref in sprd_iommu_hw_en
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fixes from Takashi Sakamoto:
"The recent integration of compiler collections introduced the
technology to check flexible array length at runtime by providing
proper annotations. In v6.10 kernel, a patch was merged into firewire
subsystem to utilize it, however the annotation was inadequate.
There is also the related change for the flexible array in sound
subsystem, but it causes a regression where the data in the payload of
isochronous packet is incorrect for some devices. These bugs are now
fixed"
* tag 'firewire-fixes-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
ALSA: firewire-lib: fix wrong value as length of header for CIP_NO_HEADER case
Revert "firewire: Annotate struct fw_iso_packet with __counted_by()"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"The bulk of this is a series of fixes for the microchip-core driver
mostly originating from one of their customers, I also applied an
additional patch adding support for controlling the word size which
came along with it since it's still the merge window and clearly had a
bunch of fairly thorough testing.
We also have a fix for the compatible used to bind spidev to the
BH2228FV"
* tag 'spi-fix-v6.11-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spidev: add correct compatible for Rohm BH2228FV
dt-bindings: trivial-devices: fix Rohm BH2228FV compatible string
spi: microchip-core: add support for word sizes of 1 to 32 bits
spi: microchip-core: ensure TX and RX FIFOs are empty at start of a transfer
spi: microchip-core: fix init function not setting the master and motorola modes
spi: microchip-core: only disable SPI controller when register value change requires it
spi: microchip-core: defer asserting chip select until just before write to TX FIFO
spi: microchip-core: fix the issues in the isr
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"These two commits clean up the excessively loose dependencies for the
RZG2L USB VBCTRL regulator driver, ensuring it shouldn't prompt for
people who can't use it"
* tag 'regulator-fix-v6.11-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: Further restrict RZG2L USB VBCTRL regulator dependencies
regulator: renesas-usb-vbus-regulator: Update the default
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fix from Mark Brown:
"Arnd sent a workaround for a false positive warning which was showing
up with GCC 14.1"
* tag 'regmap-fix-v6.11-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: maple: work around gcc-14.1 false-positive warning
|