aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-04-10ASoC: Intel: kbl: fix wrong number of channelsTzung-Bi Shih1-1/+1
Fix wrong setting on number of channels. The context wants to set constraint to 2 channels instead of 4. Signed-off-by: Tzung-Bi Shih <[email protected]> Acked-by: Pierre-Louis Bossart <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2019-04-10x86/perf/amd: Remove need to check "running" bit in NMI handlerLendacky, Thomas2-12/+22
Spurious interrupt support was added to perf in the following commit, almost a decade ago: 63e6be6d98e1 ("perf, x86: Catch spurious interrupts after disabling counters") The two previous patches (resolving the race condition when disabling a PMC and NMI latency mitigation) allow for the removal of this older spurious interrupt support. Currently in x86_pmu_stop(), the bit for the PMC in the active_mask bitmap is cleared before disabling the PMC, which sets up a race condition. This race condition was mitigated by introducing the running bitmap. That race condition can be eliminated by first disabling the PMC, waiting for PMC reset on overflow and then clearing the bit for the PMC in the active_mask bitmap. The NMI handler will not re-enable a disabled counter. If x86_pmu_stop() is called from the perf NMI handler, the NMI latency mitigation support will guard against any unhandled NMI messages. Signed-off-by: Tom Lendacky <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Cc: <[email protected]> # 4.14.x- Cc: Alexander Shishkin <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Vince Weaver <[email protected]> Link: https://lkml.kernel.org/r/Message-ID: Signed-off-by: Ingo Molnar <[email protected]>
2019-04-10powerpc/mm: Define MAX_PHYSMEM_BITS for all 64-bit configsMichael Ellerman1-1/+1
The recent commit 8bc086899816 ("powerpc/mm: Only define MAX_PHYSMEM_BITS in SPARSEMEM configurations") removed our definition of MAX_PHYSMEM_BITS when SPARSEMEM is disabled. This inadvertently broke some 64-bit FLATMEM using configs with eg: arch/powerpc/include/asm/book3s/64/mmu-hash.h:584:6: error: "MAX_PHYSMEM_BITS" is not defined, evaluates to 0 #if (MAX_PHYSMEM_BITS > MAX_EA_BITS_PER_CONTEXT) ^~~~~~~~~~~~~~~~ Fix it by making sure we define MAX_PHYSMEM_BITS for all 64-bit configs regardless of SPARSEMEM. Fixes: 8bc086899816 ("powerpc/mm: Only define MAX_PHYSMEM_BITS in SPARSEMEM configurations") Reported-by: Andreas Schwab <[email protected]> Reported-by: Hugh Dickins <[email protected]> Reviewed-by: Aneesh Kumar K.V <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2019-04-09Bluetooth: btusb: request wake pin with NOAUTOENBrian Norris1-1/+1
Badly-designed systems might have (for example) active-high wake pins that default to high (e.g., because of external pull ups) until they have an active firmware which starts driving it low. This can cause an interrupt storm in the time between request_irq() and disable_irq(). We don't support shared interrupts here, so let's just pre-configure the interrupt to avoid auto-enabling it. Fixes: fd913ef7ce61 ("Bluetooth: btusb: Add out-of-band wakeup support") Fixes: 5364a0b4f4be ("arm64: dts: rockchip: move QCA6174A wakeup pin into its USB node") Signed-off-by: Brian Norris <[email protected]> Reviewed-by: Matthias Kaehlcke <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2019-04-09dt-bindings: clock: sifive: add FU540-C000 PRCI clock constantsPaul Walmsley1-0/+18
Add preprocessor macros for the important PRCI output clocks that are needed by both the FU540 PRCI driver and DT data. Details are available in the FU540 manual in Chapter 7 of https://static.dev.sifive.com/FU540-C000-v1.0.pdf Signed-off-by: Paul Walmsley <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2019-04-09Merge tag 'mips_fixes_5.1_2' of ↵Linus Torvalds3-3/+11
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Paul Burton: "A few minor MIPS fixes: - Provide struct pt_regs * from get_irq_regs() to kgdb_nmicallback() when handling an IPI triggered by kgdb_roundup_cpus(), matching the behavior of other architectures & resolving kgdb issues for SMP systems. - Defer a pointer dereference until after a NULL check in the irq_shutdown callback for SGI IP27 HUB interrupts. - A defconfig update for the MSCC Ocelot to enable some necessary drivers" * tag 'mips_fixes_5.1_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: generic: Add switchdev, pinctrl and fit to ocelot_defconfig MIPS: SGI-IP27: Fix use of unchecked pointer in shutdown_bridge_irq MIPS: KGDB: fix kgdb support for SMP platforms.
2019-04-09Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds2-2/+6
Pull misc fixes from Al Viro: "A few regression fixes from this cycle" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: aio: use kmem_cache_free() instead of kfree() iov_iter: Fix build error without CONFIG_CRYPTO aio: Fix an error code in __io_submit_one()
2019-04-09net/mlx5e: Switch to Toeplitz RSS hash by defaultKonstantin Khlebnikov1-1/+1
Although XOR hash function can perform very well on some special use cases, to align with all drivers, mlx5 driver should use Toeplitz hash by default. Toeplitz is more stable for the general use case and it is more standard and reliable. On top of that, since XOR (MLX5_RX_HASH_FN_INVERTED_XOR8) gives only a repeated 8 bits pattern. When used for udp tunneling RSS source port manipulation it results in fixed source port, which will cause bad RSS spread. Fixes: 2be6967cdbc9 ("net/mlx5e: Support ETH_RSS_HASH_XOR") Signed-off-by: Konstantin Khlebnikov <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Moshe Shemesh <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2019-04-09Revert "net/mlx5e: Enable reporting checksum unnecessary also for L3 packets"Or Gerlitz1-2/+1
This reverts commit b820e6fb0978f9c2ac438c199d2bb2f35950e9c9. Prior the commit we are reverting, checksum unnecessary was only set when both the L3 OK and L4 OK bits are set on the CQE. This caused packets of IP protocols such as SCTP which are not dealt by the current HW L4 parser (hence the L4 OK bit is not set, but the L4 header type none bit is set) to go through the checksum none code, where currently we wrongly report checksum unnecessary for them, a regression. Fix this by a revert. Note that on our usual track we report checksum complete, so the revert isn't expected to have any notable performance impact. Also, when we are not on the checksum complete track, the L4 protocols for which we report checksum none are not high performance ones, we will still report checksum unnecessary for UDP/TCP. Fixes: b820e6fb0978 ("net/mlx5e: Enable reporting checksum unnecessary also for L3 packets") Signed-off-by: Or Gerlitz <[email protected]> Reported-by: Avi Urman <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2019-04-09net/mlx5e: Protect against non-uplink representor for encapDmytro Linkin1-0/+4
TC encap offload is supported only for the physical uplink representor. Fail for non uplink representor. Fixes: 3e621b19b0bb ("net/mlx5e: Support TC encapsulation offloads with upper devices") Signed-off-by: Dmytro Linkin <[email protected]> Reviewed-by: Eli Britstein <[email protected]> Reviewed-by: Vlad Buslov <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2019-04-09net/mlx5e: Rx, Check ip headers sanitySaeed Mahameed1-1/+8
In the two places is_last_ethertype_ip is being called, the caller will be looking inside the ip header, to be safe, add ip{4,6} header sanity check. And return true only on valid ip headers, i.e: the whole header is contained in the linear part of the skb. Note: Such situation is very rare and hard to reproduce, since mlx5e allocates a large enough headroom to contain the largest header one can imagine. Fixes: fe1dc069990c ("net/mlx5e: don't set CHECKSUM_COMPLETE on SCTP packets") Reported-by: Cong Wang <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2019-04-09net/mlx5e: Rx, Fixup skb checksum for packets with tail paddingSaeed Mahameed3-15/+74
When an ethernet frame with ip payload is padded, the padding octets are not covered by the hardware checksum. Prior to the cited commit, skb checksum was forced to be CHECKSUM_NONE when padding is detected. After it, the kernel will try to trim the padding bytes and subtract their checksum from skb->csum. In this patch we fixup skb->csum for any ip packet with tail padding of any size, if any padding found. FCS case is just one special case of this general purpose patch, hence, it is removed. Fixes: 88078d98d1bb ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"), Cc: Eric Dumazet <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2019-04-09net/mlx5e: XDP, Avoid checksum complete when XDP prog is loadedSaeed Mahameed3-3/+9
XDP programs might change packets data contents which will make the reported skb checksum (checksum complete) invalid. When XDP programs are loaded/unloaded set/clear rx RQs MLX5E_RQ_STATE_NO_CSUM_COMPLETE flag. Fixes: 86994156c736 ("net/mlx5e: XDP fast RX drop bpf programs support") Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2019-04-09net/mlx5e: Use fail-safe channels reopen in tx reporter recoverEran Ben Elisha3-5/+12
When requested to recover from error, the tx reporter might open new channels and close the existing ones. Use safe channels switch flow in order to guarantee opened channels at the end of the recover flow. For this purpose, define mlx5e_safe_reopen_channels function and use it within those flows. Fixes: de8650a82071 ("net/mlx5e: Add tx reporter support") Signed-off-by: Eran Ben Elisha <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2019-04-09net/mlx5e: Skip un-needed tx recover if interface state is downEran Ben Elisha1-1/+7
Skip recover operation if interface is in down state as TX objects are not open. This fixes a bug were the recover flow re-opened TX objects which were not opened before, leading to a possible memory leak at driver unload. Fixes: de8650a82071 ("net/mlx5e: Add tx reporter support") Signed-off-by: Eran Ben Elisha <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2019-04-09net/mlx5: FPGA, tls, idr remove on flow deleteSaeed Mahameed1-28/+15
Flow is kfreed on mlx5_fpga_tls_del_flow but kept in the idr data structure, this is risky and can cause use-after-free, since the idr_remove is delayed until tls_send_teardown_cmd completion. Instead of delaying idr_remove, in this patch we do it on mlx5_fpga_tls_del_flow, before actually kfree(flow). Added synchronize_rcu before kfree(flow) Fixes: ab412e1dd7db ("net/mlx5: Accel, add TLS rx offload routines") Signed-off-by: Saeed Mahameed <[email protected]>
2019-04-09net/mlx5: FPGA, tls, hold rcu read lock a bit longerSaeed Mahameed1-9/+9
To avoid use-after-free, hold the rcu read lock until we are done copying flow data into the command buffer. Fixes: ab412e1dd7db ("net/mlx5: Accel, add TLS rx offload routines") Reported-by: Eric Dumazet <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2019-04-09Merge tag 'mac80211-for-davem-2019-04-09' of ↵David S. Miller16-85/+163
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Various fixes: * iTXQ fixes from Felix * tracing fix - increase message length * fix SW_CRYPTO_CONTROL enforcement * WMM rule handling for regdomain intersection * max_interfaces in hwsim - reported by syzbot * clear private data in some more commands * a clang compiler warning fix I added a patch with two new (unused) macros for rate-limited printing to simplify getting the users into the tree. ==================== Signed-off-by: David S. Miller <[email protected]>
2019-04-09RISC-V: Add separate defconfig for 32bit systemsAnup Patel1-0/+84
This patch adds rv32_defconfig for 32bit systems. The only difference between rv32_defconfig and defconfig is that rv32_defconfig has CONFIG_ARCH_RV32I=y. Signed-off-by: Anup Patel <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2019-04-09mac80211: Honor SW_CRYPTO_CONTROL for unicast keys in AP VLAN modeAlexander Wetzel1-5/+4
Restore SW_CRYPTO_CONTROL operation on AP_VLAN interfaces for unicast keys, the original override was intended to be done for group keys as those are treated specially by mac80211 and would always have been rejected. Now the situation is that AP_VLAN support must be enabled by the driver if it can support it (meaning it can support software crypto GTK TX). Thus, also simplify the code - if we get here with AP_VLAN and non- pairwise key, software crypto must be used (driver doesn't know about the interface) and can be used (driver must've advertised AP_VLAN if it also uses SW_CRYPTO_CONTROL). Fixes: db3bdcb9c3ff ("mac80211: allow AP_VLAN operation on crypto controlled devices") Signed-off-by: Alexander Wetzel <[email protected]> [rewrite commit message] Signed-off-by: Johannes Berg <[email protected]>
2019-04-09drm/mediatek: no change parent rate in round_rate() for MT2701 hdmi phyWangyan Wang4-16/+20
This is the third step to make MT2701 HDMI stable. We should not change the rate of parent for hdmi phy when doing round_rate for this clock. The parent clock of hdmi phy must be the same as it. We change it when doing set_rate only. Signed-off-by: Wangyan Wang <[email protected]> Signed-off-by: CK Hu <[email protected]>
2019-04-09drm/mediatek: using new factor for tvdpll for MT2701 hdmi phyWangyan Wang1-5/+3
This is the second step to make MT2701 HDMI stable. The factor depends on the divider of DPI in MT2701, therefore, we should fix this factor to the right and new one. Test: search ok Signed-off-by: Wangyan Wang <[email protected]> Signed-off-by: CK Hu <[email protected]>
2019-04-09drm/mediatek: remove flag CLK_SET_RATE_PARENT for MT2701 hdmi phyWangyan Wang4-8/+8
This is the first step to make MT2701 hdmi stable. The parent rate of hdmi phy had set by DPI driver. We should not set or change the parent rate of MT2701 hdmi phy, as a result we should remove the flags of "CLK_SET_RATE_PARENT" from the clock of MT2701 hdmi phy. Signed-off-by: Wangyan Wang <[email protected]> Signed-off-by: CK Hu <[email protected]>
2019-04-09drm/mediatek: make implementation of recalc_rate() for MT2701 hdmi phyWangyan Wang4-14/+42
Recalculate the rate of this clock, by querying hardware to make implementation of recalc_rate() to match the definition. Signed-off-by: Wangyan Wang <[email protected]> Signed-off-by: CK Hu <[email protected]>
2019-04-09drm/mediatek: fix the rate and divder of hdmi phy for MT2701Wangyan Wang1-2/+2
Due to a clerical error,there is one zero less for 12800000. Fix it for 128000000 Fixes: 0fc721b2968e ("drm/mediatek: add hdmi driver for MT2701 and MT7623") Signed-off-by: Wangyan Wang <[email protected]> Signed-off-by: CK Hu <[email protected]>
2019-04-09ACPICA: Namespace: remove address node from global list after method terminationErik Schmauss1-0/+4
ACPICA commit b233720031a480abd438f2e9c643080929d144c3 ASL operation_regions declare a range of addresses that it uses. In a perfect world, the range of addresses should be used exclusively by the AML interpreter. The OS can use this information to decide which drivers to load so that the AML interpreter and device drivers use different regions of memory. During table load, the address information is added to a global address range list. Each node in this list contains an address range as well as a namespace node of the operation_region. This list is deleted at ACPI shutdown. Unfortunately, ASL operation_regions can be declared inside of control methods. Although this is not recommended, modern firmware contains such code. New module level code changes unintentionally removed the functionality of adding and removing nodes to the global address range list. A few months ago, support for adding addresses has been re- implemented. However, the removal of the address range list was missed and resulted in some systems to crash due to the address list containing bogus namespace nodes from operation_regions declared in control methods. In order to fix the crash, this change removes dynamic operation_regions after control method termination. Link: https://github.com/acpica/acpica/commit/b2337200 Link: https://bugzilla.kernel.org/show_bug.cgi?id=202475 Fixes: 4abb951b73ff ("ACPICA: AML interpreter: add region addresses in global list during initialization") Reported-by: Michael J Gruber <[email protected]> Signed-off-by: Erik Schmauss <[email protected]> Signed-off-by: Bob Moore <[email protected]> Cc: 4.20+ <[email protected]> # 4.20+ Signed-off-by: Rafael J. Wysocki <[email protected]>
2019-04-09drm/mediatek: fix possible object reference leakWen Yang1-0/+1
The call to of_parse_phandle returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: drivers/gpu/drm/mediatek/mtk_hdmi.c:1521:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1509, but without a corresponding object release within this function. drivers/gpu/drm/mediatek/mtk_hdmi.c:1524:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1509, but without a corresponding object release within this function. Signed-off-by: Wen Yang <[email protected]> Cc: CK Hu <[email protected]> Cc: Philipp Zabel <[email protected]> Cc: David Airlie <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: Matthias Brugger <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: CK Hu <[email protected]>
2019-04-08drm/i915: Get power refs in encoder->get_power_domains()Imre Deak4-38/+35
Push getting the reference for the encoders' power domains into the encoder get_power_domains() hook instead of doing this from the caller. This way the encoder can store away the corresponding wakerefs. This fixes the DSI encoder disabling, which didn't release these power references it acquired during HW state readout. Note that longtime ownership for the corresponding wakerefs can be thus acquired / released in two ways. Nevertheless there is always only one owner for them: After HW readout (booting/system resume): - encoder->get_power_domains() acquires - encoder->disable*() releases After a modeset (calling intel_atomic_commit()): - encoder->enable*() acquires - encoder->disable*() releases * can be any of the encoder enable/disable hooks. v2: - Check that the DSI io_wakerefs are unset both during encoder HW readout and enabling. (Chris) Fixes: 0e6e0be4c9523 ("drm/i915: Markup paired operations on display power domains") Cc: Vandita Kulkarni <[email protected]> Cc: Chris Wilson <[email protected]> Signed-off-by: Imre Deak <[email protected]> Reviewed-by: Chris Wilson <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 3a52fb7e7953f0b13df8c05d0d74b56a66888f30) Signed-off-by: Rodrigo Vivi <[email protected]>
2019-04-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds14-28/+89
Pull networking fixes from David Miller: 1) Off by one and bounds checking fixes in NFC, from Dan Carpenter. 2) There have been many weird regressions in r8169 since we turned ASPM support on, some are still not understood nor completely resolved. Let's turn this back off for now. From Heiner Kallweit. 3) Signess fixes for ethtool speed value handling, from Michael Zhivich. 4) Handle timestamps properly in macb driver, from Paul Thomas. 5) Two erspan fixes, it's the usual "skb ->data potentially reallocated and we're holding a stale protocol header pointer". From Lorenzo Bianconi. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: bnxt_en: Reset device on RX buffer errors. bnxt_en: Improve RX consumer index validity check. net: macb driver, check for SKBTX_HW_TSTAMP qlogic: qlcnic: fix use of SPEED_UNKNOWN ethtool constant broadcom: tg3: fix use of SPEED_UNKNOWN ethtool constant ethtool: avoid signed-unsigned comparison in ethtool_validate_speed() net: ip6_gre: fix possible use-after-free in ip6erspan_rcv net: ip_gre: fix possible use-after-free in erspan_rcv r8169: disable ASPM again MAINTAINERS: ieee802154: update documentation file pattern net: vrf: Fix ping failed when vrf mtu is set to 0 selftests: add a tc matchall test case nfc: nci: Potential off by one in ->pipes[] array NFC: nci: Add some bounds checking in nci_hci_cmd_received()
2019-04-08Merge branch 'fixes-v5.1' of ↵Linus Torvalds7-21/+108
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull TPM fixes from James Morris: "From Jarkko: These are critical fixes for v5.1. Contains also couple of new selftests for v5.1 features (partial reads in /dev/tpm0)" * 'fixes-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: selftests/tpm2: Open tpm dev in unbuffered mode selftests/tpm2: Extend tests to cover partial reads KEYS: trusted: fix -Wvarags warning tpm: Fix the type of the return value in calc_tpm2_event_size() KEYS: trusted: allow trusted.ko to initialize w/o a TPM tpm: fix an invalid condition in tpm_common_poll tpm: turn on TPM on suspend for TPM 1.x
2019-04-08Merge tag 'xtensa-20190408' of git://github.com/jcmvbkbc/linux-xtensaLinus Torvalds4-11/+24
Pull xtensa fixes from Max Filippov: - fix syscall number passed to trace_sys_exit - fix syscall number initialization in start_thread - fix level interpretation in the return_address - fix format string warning in init_pmd * tag 'xtensa-20190408' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: fix format string warning in init_pmd xtensa: fix return_address xtensa: fix initialization of pt_regs::syscall in start_thread xtensa: use actual syscall number in do_syscall_trace_leave
2019-04-08scsi: csiostor: fix missing data copy in csio_scsi_err_handler()Varun Prakash1-1/+4
If scsi cmd sglist is not suitable for DDP then csiostor driver uses preallocated buffers for DDP, because of this data copy is required from DDP buffer to scsi cmd sglist before calling ->scsi_done(). Signed-off-by: Varun Prakash <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2019-04-08Merge branch 'bnxt_en-fixes'David S. Miller1-3/+13
Michael Chan says: ==================== bnxt_en: 2 bug fixes. The first patch prevents possible driver crash if we get a bad RX index from the hardware. The second patch resets the device when the hardware reports buffer error to recover from the error. Please queue these for -stable also. Thanks. ==================== Signed-off-by: David S. Miller <[email protected]>
2019-04-08bnxt_en: Reset device on RX buffer errors.Michael Chan1-0/+6
If the RX completion indicates RX buffers errors, the RX ring will be disabled by firmware and no packets will be received on that ring from that point on. Recover by resetting the device. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-08bnxt_en: Improve RX consumer index validity check.Michael Chan1-3/+7
There is logic to check that the RX/TPA consumer index is the expected index to work around a hardware problem. However, the potentially bad consumer index is first used to index into an array to reference an entry. This can potentially crash if the bad consumer index is beyond legal range. Improve the logic to use the consumer index for dereferencing after the validity check and log an error message. Fixes: fa7e28127a5a ("bnxt_en: Add workaround to detect bad opaque in rx completion (part 2)") Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-08net: macb driver, check for SKBTX_HW_TSTAMPPaul Thomas1-1/+3
Make sure SKBTX_HW_TSTAMP (i.e. SOF_TIMESTAMPING_TX_HARDWARE) has been enabled for this skb. It does fix the issue where normal socks that aren't expecting a timestamp will not wake up on select, but when a user does want a SOF_TIMESTAMPING_TX_HARDWARE it does work. Signed-off-by: Paul Thomas <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-08Merge branch 'ethtool-fix-use-of-SPEED_UNKNOWN-constant'David S. Miller4-8/+8
Michael Zhivich says: ==================== ethtool: fix use of SPEED_UNKNOWN constant This patch series addresses 2 related issues: 1. ethtool_validate_speed() triggers a "signed-unsigned comparison" warning due to type difference of SPEED_UNKNOWN constant (int) and argument to ethtool_validate_speed (__u32). 2. some drivers use u16 storage for SPEED_UNKNOWN constant, resulting in value truncation and thus failure to test against SPEED_UNKNOWN correctly. This revised series addresses several feedback comments: - split up the patch in to series - do not unnecessarily change drivers that use "int" storage for speed values ==================== Signed-off-by: David S. Miller <[email protected]>
2019-04-08qlogic: qlcnic: fix use of SPEED_UNKNOWN ethtool constantMichael Zhivich1-1/+1
qlcnic driver uses u16 to store SPEED_UKNOWN ethtool constant, which is defined as -1, resulting in value truncation and thus incorrect test results against SPEED_UNKNOWN. For example, the following test will print "False": u16 speed = SPEED_UNKNOWN; if (speed == SPEED_UNKNOWN) printf("True"); else printf("False"); Change storage of speed to use u32 to avoid this issue. Signed-off-by: Michael Zhivich <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-08broadcom: tg3: fix use of SPEED_UNKNOWN ethtool constantMichael Zhivich2-6/+6
tg3 driver uses u16 to store SPEED_UKNOWN ethtool constant, which is defined as -1, resulting in value truncation and thus incorrect test results against SPEED_UNKNOWN. For example, the following test will print "False": u16 speed = SPEED_UNKNOWN; if (speed == SPEED_UNKNOWN) printf("True"); else printf("False"); Change storage of speed to use u32 to avoid this issue. Signed-off-by: Michael Zhivich <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-08ethtool: avoid signed-unsigned comparison in ethtool_validate_speed()Michael Zhivich1-1/+1
When building C++ userspace code that includes ethtool.h with "-Werror -Wall", g++ complains about signed-unsigned comparison in ethtool_validate_speed() due to definition of SPEED_UNKNOWN as -1. Explicitly cast SPEED_UNKNOWN to __u32 to match type of ethtool_validate_speed() argument. Signed-off-by: Michael Zhivich <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-08Merge branch 'erspan-use-after-free'David S. Miller2-12/+23
Lorenzo Bianconi says: ==================== fix possible use-after-free in erspan_v{4,6} Similar to what I did in commit bb9bd814ebf0 ("ipv6: sit: reset ip header pointer in ipip6_rcv"), fix possible use-after-free in erspan_rcv and ip6erspan_rcv extracting tunnel metadata since the packet can be 'uncloned' running __iptunnel_pull_header ==================== Signed-off-by: David S. Miller <[email protected]>
2019-04-08net: ip6_gre: fix possible use-after-free in ip6erspan_rcvLorenzo Bianconi1-7/+13
erspan_v6 tunnels run __iptunnel_pull_header on received skbs to remove erspan header. This can determine a possible use-after-free accessing pkt_md pointer in ip6erspan_rcv since the packet will be 'uncloned' running pskb_expand_head if it is a cloned gso skb (e.g if the packet has been sent though a veth device). Fix it resetting pkt_md pointer after __iptunnel_pull_header Fixes: 1d7e2ed22f8d ("net: erspan: refactor existing erspan code") Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-08net: ip_gre: fix possible use-after-free in erspan_rcvLorenzo Bianconi1-5/+10
erspan tunnels run __iptunnel_pull_header on received skbs to remove gre and erspan headers. This can determine a possible use-after-free accessing pkt_md pointer in erspan_rcv since the packet will be 'uncloned' running pskb_expand_head if it is a cloned gso skb (e.g if the packet has been sent though a veth device). Fix it resetting pkt_md pointer after __iptunnel_pull_header Fixes: 1d7e2ed22f8d ("net: erspan: refactor existing erspan code") Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-08selftests/tpm2: Open tpm dev in unbuffered modeTadeusz Struk1-2/+2
In order to have control over how many bytes are read or written the device needs to be opened in unbuffered mode. Signed-off-by: Tadeusz Struk <[email protected]> Reviewed-by: Jarkko Sakkinen <[email protected]> Tested-by: Jarkko Sakkinen <[email protected]> Signed-off-by: Jarkko Sakkinen <[email protected]> Signed-off-by: James Morris <[email protected]>
2019-04-08selftests/tpm2: Extend tests to cover partial readsTadeusz Struk2-0/+64
Three new tests added: 1. Send get random cmd, read header in 1st read, read the rest in second read - expect success 2. Send get random cmd, read only part of the response, send another get random command, read the response - expect success 3. Send get random cmd followed by another get random cmd, without reading the first response - expect the second cmd to fail with -EBUSY Signed-off-by: Tadeusz Struk <[email protected]> Reviewed-by: Jarkko Sakkinen <[email protected]> Tested-by: Jarkko Sakkinen <[email protected]> Signed-off-by: Jarkko Sakkinen <[email protected]> Signed-off-by: James Morris <[email protected]>
2019-04-08KEYS: trusted: fix -Wvarags warning[email protected]2-3/+3
Fixes the warning reported by Clang: security/keys/trusted.c:146:17: warning: passing an object that undergoes default argument promotion to 'va_start' has undefined behavior [-Wvarargs] va_start(argp, h3); ^ security/keys/trusted.c:126:37: note: parameter of type 'unsigned char' is declared here unsigned char *h2, unsigned char h3, ...) ^ Specifically, it seems that both the C90 (4.8.1.1) and C11 (7.16.1.4) standards explicitly call this out as undefined behavior: The parameter parmN is the identifier of the rightmost parameter in the variable parameter list in the function definition (the one just before the ...). If the parameter parmN is declared with ... or with a type that is not compatible with the type that results after application of the default argument promotions, the behavior is undefined. Link: https://github.com/ClangBuiltLinux/linux/issues/41 Link: https://www.eskimo.com/~scs/cclass/int/sx11c.html Suggested-by: David Laight <[email protected]> Suggested-by: Denis Kenzior <[email protected]> Suggested-by: James Bottomley <[email protected]> Suggested-by: Nathan Chancellor <[email protected]> Signed-off-by: Nick Desaulniers <[email protected]> Reviewed-by: Nathan Chancellor <[email protected]> Tested-by: Nathan Chancellor <[email protected]> Reviewed-by: Jarkko Sakkinen <[email protected]> Signed-off-by: Jarkko Sakkinen <[email protected]> Signed-off-by: James Morris <[email protected]>
2019-04-08tpm: Fix the type of the return value in calc_tpm2_event_size()Yue Haibing1-2/+2
calc_tpm2_event_size() has an invalid signature because it returns a 'size_t' where as its signature says that it returns 'int'. Cc: <[email protected]> Fixes: 4d23cc323cdb ("tpm: add securityfs support for TPM 2.0 firmware event log") Suggested-by: Jarkko Sakkinen <[email protected]> Signed-off-by: Yue Haibing <[email protected]> Reviewed-by: Jarkko Sakkinen <[email protected]> Signed-off-by: Jarkko Sakkinen <[email protected]> Signed-off-by: James Morris <[email protected]>
2019-04-08KEYS: trusted: allow trusted.ko to initialize w/o a TPMJarkko Sakkinen1-5/+23
Allow trusted.ko to initialize w/o a TPM. This commit also adds checks to the exported functions to fail when a TPM is not available. Fixes: 240730437deb ("KEYS: trusted: explicitly use tpm_chip structure...") Cc: James Morris <[email protected]> Reported-by: Dan Williams <[email protected]> Tested-by: Dan Williams <[email protected]> Signed-off-by: Jarkko Sakkinen <[email protected]> Signed-off-by: James Morris <[email protected]>
2019-04-08tpm: fix an invalid condition in tpm_common_pollTadeusz Struk1-1/+8
The poll condition should only check response_length, because reads should only be issued if there is data to read. The response_read flag only prevents double writes. The problem was that the write set the response_read to false, enqued a tpm job, and returned. Then application called poll which checked the response_read flag and returned EPOLLIN. Then the application called read, but got nothing. After all that the async_work kicked in. Added also mutex_lock around the poll check to prevent other possible race conditions. Fixes: 9488585b21bef0df12 ("tpm: add support for partial reads") Reported-by: Mantas Mikulėnas <[email protected]> Tested-by: Mantas Mikulėnas <[email protected]> Signed-off-by: Tadeusz Struk <[email protected]> Reviewed-by: Jarkko Sakkinen <[email protected]> Signed-off-by: Jarkko Sakkinen <[email protected]> Signed-off-by: James Morris <[email protected]>
2019-04-08tpm: turn on TPM on suspend for TPM 1.xJarkko Sakkinen1-8/+6
tpm_chip_start/stop() should be also called for TPM 1.x devices on suspend. Add that functionality back. Do not lock the chip because it is unnecessary as there are no multiple threads using it when doing the suspend. Fixes: a3fbfae82b4c ("tpm: take TPM chip power gating out of tpm_transmit()") Reported-by: Paul Zimmerman <[email protected]> Signed-off-by: Jarkko Sakkinen <[email protected]> Tested-by: Domenico Andreoli <[email protected]> Signed-off-by: James Morris <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.